From the Sector

Reset
339 results
ElasTool in a lifting unit, e.g. for logistics, transport or mining Grafik JUMBO-Textil
ElasTool in a lifting unit, e.g. for logistics, transport or mining
22.08.2023

JUMBO-Textil: Lubricant-free tensioning and clamping system

From mechanical engineering to the construction industry, from logistics to rescue technology – tensioning and clamping systems fulfil important tasks in a number of industries. The possible uses of technical textiles for industrial applications of this kind are manifold.

Patented and precisely configured
The ElasTool system from the elastics expert consists of a connection tool and a rubber rope connected to this tool via integrated locking elements. The stainless steel, aluminium or plastic connection tool and the rubber rope – with a thickness of between 12 and 38 mm – are each configured to fit precisely. The highlight of the patented connection solution: the more tensile force is exerted, the more the rope is jammed. Thanks to the locking system, ElasTool still provides a secure hold even when the diameter of the rubber rope narrows to up to 60 percent due to the tensile load. A crucial advantage over conventional end connections by pressing.

From mechanical engineering to the construction industry, from logistics to rescue technology – tensioning and clamping systems fulfil important tasks in a number of industries. The possible uses of technical textiles for industrial applications of this kind are manifold.

Patented and precisely configured
The ElasTool system from the elastics expert consists of a connection tool and a rubber rope connected to this tool via integrated locking elements. The stainless steel, aluminium or plastic connection tool and the rubber rope – with a thickness of between 12 and 38 mm – are each configured to fit precisely. The highlight of the patented connection solution: the more tensile force is exerted, the more the rope is jammed. Thanks to the locking system, ElasTool still provides a secure hold even when the diameter of the rubber rope narrows to up to 60 percent due to the tensile load. A crucial advantage over conventional end connections by pressing.

Economical and low maintenance
The system has further advantages: the textile solution runs quietly. Unlike clamping systems with steel cable springs, there is no creaking here. In addition, textiles, plastic and aluminium are particularly lightweight materials. ElasTool therefore saves energy. Another benefit: the connection system works without lubricating oil. While conventional tensioning and clamping solutions in industrial plants and products have to be oiled regularly, the JUMBO textile system works completely maintenance-free.

Versatile and easily interchangeable
Depending on the area of application of the ElasTool, the interchangeable head can be exchanged: Plastic hook instead of aluminium eyelet, stainless steel flange instead of aluminium hook – for example. The interchangeable head can be replaced effortlessly and without special tools.

"A lifting system in a high-bay warehouse, a trolley in a crane, damping for compressors or crash systems – these are just three of the many possible applications. We adapt the dimensions, material, force-stretch behaviour, flame retardancy – like all properties – specifically to the respective project," emphasises Carl Mrusek, Chief Sales Officer of JUMBO-Textil. "Thus, with ElasTool, we offer a safe load connection for a wide variety of applications in industry."

ElasTool from JUMBO-Textil

  • Lightweight and flexible alternative to conventional tensioning and clamping systems
  • Suitable even in small installation spaces
  • With individual specifications and infinitely customisable dimensions
  • Connection tool optionally made of plastic, aluminium or stainless steel
  • Rubber rope in a thickness of 12 to 38 mm
  • Rubber rope made of polyamide, polyester, recycled PES, polypropylene, aramid, Dyneema, monofilament, natural fibres
  • Different interchangeable head shapes possible
  • As an end connection or for coupling with other machine elements
  • Tensile load up to 600 N, in individual cases more than this
  • Individually configurable e.g. with hook, eyelet or flange
Source:

JUMBO-Textil

18.08.2023

Indorama Ventures: Performance Summary of 2Q23

  • Revenue of US$4B, a decline of 1% QoQ and 27% YoY
  • Reported EBITDA of US$321M, an increase of 7% QoQ and decrease of 68% YOY
  • Operating cash flows of US$491M
  • Net Operating Debt to Equity of 0.95x
  • Reported EPS of THB 0.04

Indorama Ventures Public Company Limited (IVL) reported marginally improved quarterly earnings as the company’s inherent advantages and continued focus on improving competitiveness helped bolster its business amid a continued weak operating environment.

  • Revenue of US$4B, a decline of 1% QoQ and 27% YoY
  • Reported EBITDA of US$321M, an increase of 7% QoQ and decrease of 68% YOY
  • Operating cash flows of US$491M
  • Net Operating Debt to Equity of 0.95x
  • Reported EPS of THB 0.04

Indorama Ventures Public Company Limited (IVL) reported marginally improved quarterly earnings as the company’s inherent advantages and continued focus on improving competitiveness helped bolster its business amid a continued weak operating environment.

Indorama Ventures achieved Reported EBITDA of $321 million in 2Q23, an increase of 7% QoQ and a decline of 68% YoY. Sales volumes remained resilient, rising 4% QoQ, amid continued destocking in the global chemicals industry from its peak in 4Q last year. Management is taking steps to conserve cash and safeguard the company’s competitive advantages as the global industry is impacted by increased capacity and lower margins with China boosting exports to offset muted domestic demand. Measures include redoubling efforts to reduce working capital and capex targeting $500 million of cash savings this year, optimizing the company’s European manufacturing footprint, and continued focus on Project Olympus, digitalization, and organizational enhancement.

Volumes are expected to improve in the second half of the year, with all three of Indorama Ventures’ business segments benefiting from the management measures and a gradual improvement in the outlook for the industry. Combined PET, the company’s largest segment, posted Reported EBITDA of $194 million, a 37% increase QoQ as destocking eased in most markets and supported stable volumes. Sales volumes are expected to grow in the second half of the year as manufacturing is optimized in Europe and expansion projects ramp up in India.

Fibers segment achieved Reported EBITDA of $20 million, a decrease of 37% QoQ, impacted by lower margins in the Lifestyle vertical and weak demand for Hygiene products in Europe. Volumes are expected to improve as manufacturing in Europe is optimized and expansion projects come online in the U.S and India. Mobility fibers volumes will see improvement in line with increasing automotive demand. Integrated Oxides and Derivatives (IOD) segment posted a 27% decline in QoQ Reported EBITDA to $94 million amid destocking in Crop Solutions market. Volumes will continue to be supported by reducing levels of destocking in the downstream portfolio.

Source:

Indorama Ventures Public Company Limited

Trützschler and Balkan join forces (c) Trützschler
Markus Wurster, Director Sales and Marketing at Trützschler Group (left), and Osman Balkan, Owner of Balkan Textile Machinery INC.CO (right).
18.08.2023

Trützschler and Balkan join forces

Trützschler announces their cooperation with Balkan Textile Machinery. INC.CO, a partner which completes Trützschler's product portfolio for recycling by cutting and pulling solutions.

Both Balkan and Trützschler are family-owned companies for whom sustainability in the textile chain is a major concern. Balkan is well established in Turkey, one of the most important markets for textile recycling. Their robust and reliable machines help to cut, mix and tear textile waste to individual fibers, and to press them into bales of secondary fibers. These bales can be fed to the preparation process with Trützschler machines.

Trützschler announces their cooperation with Balkan Textile Machinery. INC.CO, a partner which completes Trützschler's product portfolio for recycling by cutting and pulling solutions.

Both Balkan and Trützschler are family-owned companies for whom sustainability in the textile chain is a major concern. Balkan is well established in Turkey, one of the most important markets for textile recycling. Their robust and reliable machines help to cut, mix and tear textile waste to individual fibers, and to press them into bales of secondary fibers. These bales can be fed to the preparation process with Trützschler machines.

“We are now able to provide a complete line-up of technologically leading machinery which has been specifically developed for rotor and ring yarns from recycled materials”, says Markus Wurster, Director Sales and Marketing at Trützschler Group. “Customers benefit from less complexity when planning and executing a mill project. The combined processes from Trützschler and Balkan are perfectly fine-tuned, reliable and reproducible. And of course, customers have access to Trützschler’s premium service.” Osman Balkan, Owner of Balkan Textile Machinery. INC.CO, adds: “I am very happy that we can join forces with such a strong international player like Trützschler. Together we can make a significant contribution to dealing with textile waste globally."

Source:

Trützschler Group SE

Graphik CHT
08.08.2023

CHT Group publishes Sustainability Report 2022

The Sustainability Report 2022, which is now digitally available summarizes key ecological, economic, and social developments.
The report shows that the CHT Group has defined and anchored sustainability as an integral part of its corporate strategy.
 

  • The group of companies is pursuing the goal of becoming climate-neutral by 2045
  • At the end of 2021, the CHT Group subscribed to the Science Based Targets initiative (SBTi) to meet the targets of the Paris Climate Agreement and committed to the 1.5 °C target
  • 77 % of sales were achieved with sustainably classified products

The issue of sustainability has been anchored in the DNA of the internationally active foundation-owned group of companies for 70 years. No less an aspiration is derived from this than to support all customers with the most innovative, most sustainable products and solutions and thus to become the leading supplier of sustainable chemical products and solutions in all target markets.

The Sustainability Report 2022, which is now digitally available summarizes key ecological, economic, and social developments.
The report shows that the CHT Group has defined and anchored sustainability as an integral part of its corporate strategy.
 

  • The group of companies is pursuing the goal of becoming climate-neutral by 2045
  • At the end of 2021, the CHT Group subscribed to the Science Based Targets initiative (SBTi) to meet the targets of the Paris Climate Agreement and committed to the 1.5 °C target
  • 77 % of sales were achieved with sustainably classified products

The issue of sustainability has been anchored in the DNA of the internationally active foundation-owned group of companies for 70 years. No less an aspiration is derived from this than to support all customers with the most innovative, most sustainable products and solutions and thus to become the leading supplier of sustainable chemical products and solutions in all target markets.

"Climate neutrality" and comprehensive social responsibility  
In the implementation of the sustainability strategy of the CHT Group, the field of action "climate neutrality" takes a central role. The CHT Group has set itself the goal of being climate neutral both in its own production and in the supply chain from the year 2045. The path to climate neutrality by 2045 is illustrated in the report as part of the strategic goal.

In addition to climate protection, social responsibility is also a top priority for the CHT Group. The continuous improvement of health protection and occupational safety is a top priority for the company.

From CHT's point of view, qualified and committed employees make a significant contribution to the company's future success. For this reason, the CHT Group promotes the professional and personal development of its workforce to a high degree and invests in future-oriented and targeted training and further education of its workforce.

For the CHT Group, the respect for human rights is an indispensable pillar of the corporate culture and an essential part of the group-wide Code of Conduct. In 2022, the Human Rights Compliance Policy Statement was developed, and compliance processes and measures were put in place to prevent any violations and identify and mitigate human rights related risks.

 

More information:
CHT Group Sustainability Report
Source:

CHT Gruppe

07.08.2023

SGL Carbon: Confirmation of the full-year guidance for 2023

  • Sales up 1.9% year-on-year to €560.5 million with stable adjusted EBITDA of €88.0 million
  • Strong business performance of the Graphite Solutions, Process Technology and Composite Solutions businesses
  • Sales and earnings decline at Carbon Fibers due to weakness of wind market
  • Impairment at Carbon Fibers of €44.7 million

Despite the increasingly difficult economic environment, SGL Carbon was able to increase sales in H1 2023 from €549.8 million in the previous year to €560.5 million. Adjusted EBITDA (EBITDApre) remained almost unchanged at €88.0 million (H1 2022: €87.9 million). The expected good business performance of the Graphite Solutions business unit and the better-than-expected sales and earnings development of Process Technology and Composite Solutions compensated the drop in demand in Carbon Fibers.

  • Sales up 1.9% year-on-year to €560.5 million with stable adjusted EBITDA of €88.0 million
  • Strong business performance of the Graphite Solutions, Process Technology and Composite Solutions businesses
  • Sales and earnings decline at Carbon Fibers due to weakness of wind market
  • Impairment at Carbon Fibers of €44.7 million

Despite the increasingly difficult economic environment, SGL Carbon was able to increase sales in H1 2023 from €549.8 million in the previous year to €560.5 million. Adjusted EBITDA (EBITDApre) remained almost unchanged at €88.0 million (H1 2022: €87.9 million). The expected good business performance of the Graphite Solutions business unit and the better-than-expected sales and earnings development of Process Technology and Composite Solutions compensated the drop in demand in Carbon Fibers.

In particular, the Graphite Solutions (GS) business unit contributed to the stable development of the Company with a 15.3% increase in sales to €280.6 million (H1 2022: €243.4 million) and a 20.6% improvement in adjusted EBITDA to €65.1 million (H1 2022: €54.0 million). GS benefited especially from the high demand of the semiconductor industry. The semiconductor and LED market segment now accounts for around 45% of GS revenue (H1 2022: around 35%).

With a 30.9% increase in sales to €64.4 million (H1 2022: €49.2 million) and a significant rise in adjusted EBITDA from €4.1 million to €11.9 million, the business performance of Process Technology (PT) was significantly above the original planning. Composite Solutions (CS) also reported a higher-than-forecast sales increase of 14.4% to €79.6 million in H1 2023 (H1 2022: €69.6 million) and an improvement in adjusted EBITDA of 26.8% to €12.3 million (H1 2022: €9.7 million). By contrast, the business performance of the Carbon Fibers (CF) unit was not in line with expectations, with a 28.9% decline in sales to €125.1 million (H1 2022: €176.0 million) and a 78.4% drop in earnings to €6.1 million (H1 2022: €28.2 million).

An important market segment for the Carbon Fibers business unit is the wind industry. Demand for carbon fibers for the wind industry has declined sharply since the beginning of the year. According to current estimates, the expected recovery in demand in H2 2023 will not materialize. SGL Carbon expects customer demand from the wind industry to pick up in 2024.

As already announced in the ad hoc release of July 24, 2023, an impairment loss of €44.7 million was recognized on the assets of Carbon Fibers as of June 30, 2023.

Results situation
SGL Carbon's adjusted EBITDA (EBITDApre) remained almost stable in a half-year comparison at €88.0 million (H1 2022: €87.9 million). Due to the lack of demand from wind industry, CF's production capacity utilization decreased and idle capacity costs weighed on adjusted EBITDA. By contrast, higher margins from product mix and volume effects in the other three business units had a positive impact on adjusted EBITDA.

Non-recurring items and one-off effects not included in adjusted EBITDA totaled minus €46.9 million in the first half of 2023, of which €44.7 million resulted from an impairment loss in the CF business unit.

In addition to the above-mentioned effects and nearly unchanged depreciation and amortization of €29.1 million (H1 2022: €28.9 million), the decline in EBIT resulted in particular from the impairment loss already described (€44.7 million). After €69.6 million in H1 2022, EBIT amounted to €12.0 million in the reporting period.

Taking into account the slightly improved financial result of minus €15.8 million (H1 2022: minus €16.6 million), consolidated net income for the first six months of the current financial year amounted to minus €10.0 million, compared to €48.8 million in the first half of the previous year.

Net financial debt and equity
To complete its refinancing, SGL Carbon issued convertible bonds with a volume of €118.7 million in June 2023 and drew an existing term loan facility of €75 million in July 2023, which was used together with cash of the Company on July 28, 2023 to repay the corporate bond (outstanding as of June 30, 2023: €237.4 million). Accordingly, cash and cash equivalents increased to €310.5 million as of June 30, 2023 (€227.3 million as of December 31, 2022) and financial debt temporarily increased to €480.4 million (€398.1 million as of December 31, 2022). Net financial debt remained nearly unchanged at €169.9 million as of June 30, 2023 (Dec. 31, 2022: € 170.8 million).

Despite the impairment loss of €44.7 million in Carbon Fibers, shareholders' equity amounted to €565.2 million as of June 30, 2023, only slightly lower than at the end of 2022 (Dec. 31, 2022: €569.3 million). This corresponds to an equity ratio of 36.1% (Dec. 31, 2022: 38.5%).

Source:

SGL CARBON SE

03.08.2023

adidas: reports 2nd Q revenues flat versus the prior year

  • Currency-neutral revenues flat versus the prior-year level
  • Top-line development reflects improved sell-out trends and conservative sell-in strategy
  • Gross margin up 0.6pp to 50.9%; strong improvement compared to Q1 reflecting better sell-through and less discounting
  • Operating profit of € 176 million includes extraordinary expenses of around € 160 million related to one-off costs, donations and accruals for future donations
  • Inventory position improves substantially versus Q1 level to € 5.5 billion; now up only 1% year-over-year

In the second quarter of 2023, currency-neutral revenues were flat versus the prior-year level. The top-line development continued to be impacted by the company’s conservative sell-in approach in order to reduce high inventory levels, particularly in North America and Greater China. At the same time, adidas second quarter revenues benefited from the first sale of some of its Yeezy inventory. The initial product drop in June generated revenues of around € 400 million in Q2, which is largely in line with the Yeezy sales generated in the prior year’s quarter.

  • Currency-neutral revenues flat versus the prior-year level
  • Top-line development reflects improved sell-out trends and conservative sell-in strategy
  • Gross margin up 0.6pp to 50.9%; strong improvement compared to Q1 reflecting better sell-through and less discounting
  • Operating profit of € 176 million includes extraordinary expenses of around € 160 million related to one-off costs, donations and accruals for future donations
  • Inventory position improves substantially versus Q1 level to € 5.5 billion; now up only 1% year-over-year

In the second quarter of 2023, currency-neutral revenues were flat versus the prior-year level. The top-line development continued to be impacted by the company’s conservative sell-in approach in order to reduce high inventory levels, particularly in North America and Greater China. At the same time, adidas second quarter revenues benefited from the first sale of some of its Yeezy inventory. The initial product drop in June generated revenues of around € 400 million in Q2, which is largely in line with the Yeezy sales generated in the prior year’s quarter.

Footwear revenues grew 1% during the quarter, reflecting strong growth in football, basketball, tennis and US sports. Apparel sales declined 3% in the second quarter. As the apparel market continues to be particularly overstocked, the company continued its conservative sell-in strategy to improve sell-through and margins in the medium term. Accessories grew 8% during the quarter driven by growth in football.  

Lifestyle revenues were down during the quarter despite extraordinary demand for the company’s Samba, Gazelle and Campus franchises. While adidas slowly started to scale its offering for these product families during the second quarter, the total volume still only represents a small portion of the company’s overall business. Sales in the adidas Performance categories continued to show positive momentum. This reflects strong demand for new product introductions such as the latest iterations of its Predator, X and Copa football boots, as well as jerseys for both the FIFA Women’s World Cup 2023 and the company’s unique portfolio of football teams ahead of the start of the European club season. In addition, the Adizero product family in running continued to gain a lot of attention around marathon races across the world, translating into higher demand. At the same time, the brand’s Barricade tennis franchise grew strongly, leveraging the excitement around major tournaments.

In euro terms, the company’s revenues declined 5% to € 5.343 billion in the second quarter (2022: € 5.596 billion).

Stronger sell-out trends and conservative sell-in
As a result of the company’s initiatives to reduce high inventory levels, currency-neutral sales in wholesale declined 10% despite double-digit growth in Greater China and Latin America. At the same time, direct-to-consumer (DTC) revenues grew 16% versus the prior year. This development was driven by strong growth in both the company’s e-commerce business (+14%) as well as own retail stores (+19%), reflecting continued strong sell-out trends across most regions. The outperformance of the company’s DTC channel versus the wholesale business was also related to the first sale of the Yeezy inventory, which was done exclusively through adidas’ own e-commerce channel.

Double-digit growth in Greater China and Latin America
Currency-neutral sales in North America declined 16% during the quarter. The region is particularly affected by elevated inventory levels in the market and – in response to this – the company’s significantly reduced sell-in. Revenues in Greater China grew 16% in Q2, reflecting double-digit sell-out growth in both wholesale and own retail. Sales in EMEA were down slightly (-1%) despite double-digit DTC growth. While the company’s initiatives to reduce inventory levels and discounting weighed on the overall top-line development in the region, adidas recorded significantly improving full-price trends during the quarter. Revenues in Asia-Pacific increased 7% during the quarter, driven by strong double-digit growth in DTC. Latin America continued to increase at a double-digit rate (+30%), reflecting strong growth in both wholesale and DTC.

Gross margin improves to 50.9%
The company’s second quarter gross margin increased 0.6 percentage points to 50.9% (2022: 50.3%). This improvement was mainly driven by price increases the company has implemented as well as by an improved channel mix. At the same time, higher supply chain costs and unfavorable currency movements continued to strongly weigh on the gross margin development. While still adversely impacting the company’s gross margin in the quarter, discounting levels significantly improved compared to the first quarter of the year.  

Operating profit of € 176 million, resulting in an operating margin of 3.3%
Other operating expenses were up 3% to € 2.582 billion (2022: € 2.501 billion). As a percentage of sales, other operating expenses increased 3.6 percentage points to 48.3% (2022: 44.7%). Marketing and point-of-sale expenses decreased 7% to € 617 million (2022: € 663 million). As a percentage of sales, marketing and point-of-sale expenses slightly decreased by 0.3 percentage points to 11.5% (2022: 11.8%). Operating overhead expenses were up 7% to € 1.965 billion (2022: € 1.838 billion), reflecting higher logistics expenses. In addition, the company recorded one-off costs of around € 50 million related to the strategic review the company is currently conducting as well as donations and accruals for further donations in an amount of around € 110 million. As a percentage of sales, operating overhead expenses increased 3.9 percentage points to 36.8% (2022: 32.8%). The company’s operating profit amounted to € 176 million (2022: € 392 million) in the quarter. This amount includes the extraordinary expenses of in total around € 160 million reflecting the one-off costs related to the strategic review as well as the donations and accruals for further donations. The sale of the Yeezy product positively impacted adidas’ operating profit by an incremental amount of around € 150 million in Q2. The operating margin reached 3.3% in the quarter (2022: 7.0%).

Net income from continuing operations of € 96 million
After taxes, the company’s net income from continuing operations amounted to € 96 million (2022: € 360 million), while basic EPS from continuing operations decreased to € 0.48 (2022: € 1.88).


Outlook

adidas expects revenues to decline at a mid-single-digit rate
On July 24, adidas had adjusted its full year financial guidance to reflect the positive impact of the first sale of some of its Yeezy inventory and a slightly better-than-expected development of the adidas business in the first half of the year. At the same time, macroeconomic challenges and geopolitical tensions persist. Elevated recession risks in North America and Europe as well as uncertainty around the recovery in Greater China continue to exist. In addition, the company’s revenue development will continue to be impacted by the initiatives to significantly reduce high inventory levels. As a result, adidas now expects currency-neutral revenues to decline at a mid-single-digit rate in 2023 (previously: decline at a high-single-digit rate).

Underlying operating profit anticipated to be around the break-even level
The company’s underlying operating profit – excluding any one-offs related to Yeezy and the ongoing strategic review – is still anticipated to be around the break-even level. Including the positive impact from the first Yeezy drop of around € 150 million, the potential write-off of the remaining Yeezy inventory of now € 400 million (previously: € 500 million) and one-off costs related to the strategic review of up to € 200 million (unchanged), the company now expects to report an operating loss of € 450 million in 2023 (previously: loss of € 700 million).

On August 2, the company launched a second drop of Yeezy inventory. Throughout the month of August, adidas is making a range of existing products available through both its own e-commerce channel as well as the digital platforms of selected wholesale partners. If successful, this second drop would further improve the company’s results. However, as the results of this drop are yet unknown, it is not accounted for in the company’s current top- and bottom-line outlook for 2023.

More information:
adidas business report
Source:

adidas

Karl Mayer Office in Bursa Photo Karl Mayer Group
Office in Bursa
03.08.2023

KARL MAYER GROUP sets up Turkish subsidiary

The KARL MAYER GROUP is intensifying its business activities in Turkey and is setting up a subsidiary in Bursa. The opening of the new site is planned for October 2023.

The company's success on the market to date has been made possible to a large extent by its close and long-standing cooperation with Erko, the KARL MAYER GROUP's regional representative. The two companies have been cooperating for more than 50 years and see further positive market development in Turkey in the medium to long term.

In order to exploit and shape the potential, they will sharpen the focus of their competences in the Warp Knitting and Warp Preparation Business Units: Erko A.S. will focus on sales, taking advantage of its long-standing regional network. The KARL MAYER GROUP will take over the after-sales service and offer customers a link to the Care Solutions world of the group. Customers benefit from next-level support with many innovative solutions, especially digital ones, for meeting the challenges of our time. At the same time, they can continue to build on the tried and trusted.

The KARL MAYER GROUP is intensifying its business activities in Turkey and is setting up a subsidiary in Bursa. The opening of the new site is planned for October 2023.

The company's success on the market to date has been made possible to a large extent by its close and long-standing cooperation with Erko, the KARL MAYER GROUP's regional representative. The two companies have been cooperating for more than 50 years and see further positive market development in Turkey in the medium to long term.

In order to exploit and shape the potential, they will sharpen the focus of their competences in the Warp Knitting and Warp Preparation Business Units: Erko A.S. will focus on sales, taking advantage of its long-standing regional network. The KARL MAYER GROUP will take over the after-sales service and offer customers a link to the Care Solutions world of the group. Customers benefit from next-level support with many innovative solutions, especially digital ones, for meeting the challenges of our time. At the same time, they can continue to build on the tried and trusted.

The headquarters in Bursa covers just under 1,000 m² on three levels. It offers space for service, an academy with textile samples and a training machine, a workshop for minor repairs and a warehouse for the spare parts business. Located in the top-selling region in Turkey, it is also designed as a contact point for customers.

Thanks to its strong position on the Turkish market, the KARL MAYER GROUP intends to support the companies here, most of which are family-run, in the forthcoming generational changes, and to provide the next generation with specialist support and qualifications.

More information:
Karl Mayer Gruppe Turkey
Source:

Karl Mayer Group

02.08.2023

Lenzing: Business Performance in the first half of 2023

  • Revenue of EUR 1.25 bn and EBITDA of EUR 136.5 mn in the first half of 2023
  • EBITDA and net result for the period significantly improved compared with the first quarter of 2023
  • Cost-cutting program and measures to strengthen sales activities being implemented as planned
  • Liquidity position strengthened by successful capital increase and extension of credit terms
  • Production of TENCEL™ brand modal fibers successfully launched in China

The business performance of the Lenzing Group, a leading global supplier of specialty fibers for the textile and nonwoven industries, largely reflected the subdued market trends in the first half of 2023. After the market environment deteriorated significantly in the second half of 2022, signs of recovery were evident during the first and second quarters of 2023 in terms of both raw material and energy costs as well as demand. Textile fibers recorded improving demand, and business with nonwoven fibers and with dissolving wood pulp proved to be very stable.

  • Revenue of EUR 1.25 bn and EBITDA of EUR 136.5 mn in the first half of 2023
  • EBITDA and net result for the period significantly improved compared with the first quarter of 2023
  • Cost-cutting program and measures to strengthen sales activities being implemented as planned
  • Liquidity position strengthened by successful capital increase and extension of credit terms
  • Production of TENCEL™ brand modal fibers successfully launched in China

The business performance of the Lenzing Group, a leading global supplier of specialty fibers for the textile and nonwoven industries, largely reflected the subdued market trends in the first half of 2023. After the market environment deteriorated significantly in the second half of 2022, signs of recovery were evident during the first and second quarters of 2023 in terms of both raw material and energy costs as well as demand. Textile fibers recorded improving demand, and business with nonwoven fibers and with dissolving wood pulp proved to be very stable.

Outlook
The war in Ukraine and the more restrictive monetary policy pursued by many central banks in order to combat inflation are expected to continue to influence global economic activity. The IMF warns that risks remain elevated overall and forecasts growth of 3 percent for both 2023 and 2024. The currency environment is expected to remain volatile in the regions of relevance to Lenzing.

This market environment continues to weigh on the consumer climate and on sentiment in the industries relevant to Lenzing. Recently, however, the outlook brightened somewhat according to a global survey by the ITMF.*

In the trend-setting market for cotton, signs are emerging of a further buildup of stocks in the current 2022/23 crop season. Initial forecasts also see a further buildup of stocks in 2023/24, albeit to a lesser extent.

However, despite signs of recovery in both demand and raw material and energy costs, earnings visibility remains limited overall.

Lenzing is fully on track with the implementation of its reorganization and cost-cutting program. These and further measures are aimed at positioning Lenzing in the best possible way for the expected market recovery.

In structural terms, Lenzing continues to anticipate growth in demand for environmentally responsible fibers for the textile and clothing industry as well as the hygiene and medical sectors. As a consequence, Lenzing is very well positioned with its “Better Growth” strategy and plans to continue driving growth with specialty fibers as well as its sustainability goals, including the transformation from a linear to a circular economy model.

The successful implementation of the key projects in Thailand and Brazil as well as the investment projects in China and Indonesia will further strengthen Lenzing’s positioning in this respect.

Taking into consideration the aforementioned factors and assuming a further market recovery in the current financial year, the Lenzing Group continues to expect EBITDA in a range between EUR 320 mn and EUR 420 mn for 2023.

 

*Source: ITMF, 21st Global Textile Industry Survey, July 2023

Source:

Lenzing AG

26.07.2023

SGL Carbon SE confirms full-year guidance 2023

According to preliminary figures for H1 2023, SGL Carbon's Group sales increased year-on-year from €549.8 million to €560.5 million, with EBITDApre1 almost unchanged at €88.0 million (H1 2022: €87.9 million). The expected good business performance of the Business Unit Graphite Solutions and the better-than-expected sales and earnings development of the segments Process Technology and Composite Solutions compensated the drop in demand in the Business Unit Carbon Fibers.

According to preliminary figures for H1 2023, SGL Carbon's Group sales increased year-on-year from €549.8 million to €560.5 million, with EBITDApre1 almost unchanged at €88.0 million (H1 2022: €87.9 million). The expected good business performance of the Business Unit Graphite Solutions and the better-than-expected sales and earnings development of the segments Process Technology and Composite Solutions compensated the drop in demand in the Business Unit Carbon Fibers.

Graphite Solutions (GS) increased sales by 15.3% year-on-year to €280.6 million and EBITDApre by 20.6% to €65.1 million. With a 30.9% rise in sales (€64.4 million) and a significant improvement in EBITDApre from €4.1 million to €11.9 million, the business performance of Process Technology (PT) was significantly ahead of the original budget. Composite Solutions (CS) also reported a higher-than-expected sales increase of 14.4% to €79.6 million in H1 2023 and an increase in EBITDApre of 26.8% to €12.3 million compared to H1 last year. By contrast, the business performance of the Carbon Fibers (CF) unit was not in line with expectations, with a 28.9% decline in sales to €125.1 million and an EBITDApre contribution of €6.1 million (-78.4% compared to the 1st half of the previous year).

An important market segment of the Carbon Fibers Business Unit is the wind industry. Demand for carbon fibers for the wind industry has declined sharply since the beginning of the year. According to current estimates, the expected recovery in demand in H2 2023 will not materialize for the time being. SGL Carbon expects customer demand from the wind industry to pick up in 2024.

Based on this, an impairment loss of between €40-50 million will be recognized on the assets of the Carbon Fibers Business Unit as of June 30, 2023. The impairment relates exclusively to Carbon Fibers, the operating business of the other Business Units is not affected.

SGL Carbon's equity ratio after the impairment as of June 30, 2023 is approximately 36% (December 31, 2022: 38.5%).

Further information on the first six months of fiscal year 2023 can be obtained from the half-year report, which will be published on August 3, 2023.

1The definition of key figures used in this release is aligned to the Annual Report 2022.

Source:

SGL CARBON SE

12.07.2023

SHIMA SEIKI to exhibit at Tech Fashion shows in Brazil

SHIMA SEIKI MFG., LTD., together with its Brazilian representative BRASTEMA TECNOLOGIA TÊXTIL LTDA., will host the Tech Fashion shows, a series of private exhibitions held at two locations in Brazil in July and August. The exhibitions will be a showcase for the company’s latest computerized flat knitting technology, presented through fashion shows, machine exhibits and the latest knit samples featured at ITMA 2023. The event is organized by the Fashion Committee of Fitemavest, consultants to Brazil's fashion market, and will feature presentations by CS DESIGN STUDIO designer Cecilia Seibel.

Technological displays include a full lineup of SHIMA SEIKI flat knitting machines, ranging from the MACH2XS WHOLEGARMENT® knitting machine to N.SVR122 computerized shaping machine, as well as the SFG-I fully automated glove knitting machine. Exhibited machines vary between locations. Details are given below under ‘Exhibited Technology.’

SHIMA SEIKI MFG., LTD., together with its Brazilian representative BRASTEMA TECNOLOGIA TÊXTIL LTDA., will host the Tech Fashion shows, a series of private exhibitions held at two locations in Brazil in July and August. The exhibitions will be a showcase for the company’s latest computerized flat knitting technology, presented through fashion shows, machine exhibits and the latest knit samples featured at ITMA 2023. The event is organized by the Fashion Committee of Fitemavest, consultants to Brazil's fashion market, and will feature presentations by CS DESIGN STUDIO designer Cecilia Seibel.

Technological displays include a full lineup of SHIMA SEIKI flat knitting machines, ranging from the MACH2XS WHOLEGARMENT® knitting machine to N.SVR122 computerized shaping machine, as well as the SFG-I fully automated glove knitting machine. Exhibited machines vary between locations. Details are given below under ‘Exhibited Technology.’

The potential of each of these knitting machines are maximized in combination with the SDS®-ONE APEX4 3D design system and APEXFiz® design software. At the core of the company’s "Total Fashion System" concept, SDS®-ONE APEX4 and APEXFiz® provide comprehensive support throughout the apparel supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design to production and even sales promotion. Especially effective is their capability to improve on the design and evaluation process with virtual sampling. Ultra-realistic simulation capability on SDS®-ONE APEX4 and APEXFiz® allows virtual sampling to minimize the amount of time, cost and material spent during the sample-making process

The fashion show will feature the newest creations in WHOLEGARMENT® and other knitwear.

Source:

SHIMA SEIKI MFG., LTD.

30.06.2023

RadiciGroup closes 2022 with positive results

With total sales of EUR 1,543 million, generated by over 30 production and sales units in Europe, Asia, and America, Radici Group closed its 2022 financial year with slight growth over 2021. EBITDA reached EUR 157 million in 2022, and net income for the year was EUR 80 million.

With total sales of EUR 1,543 million, generated by over 30 production and sales units in Europe, Asia, and America, Radici Group closed its 2022 financial year with slight growth over 2021. EBITDA reached EUR 157 million in 2022, and net income for the year was EUR 80 million.

“We are moderately pleased with the 2022 figures,” Angelo Radici, president of RadiciGroup, commented. “Despite an unpredictable and challenging year, we were able to achieve positive results. Although the rise in energy costs began to be felt in January, we managed to maintain our position in the first three months of the year due to a significant increase in demand. From the second quarter onwards, the European market experienced a significant slowdown due to the outbreak of war in Ukraine, which exacerbated the already soaring costs of energy and raw materials. The situation was completely out of hand and made worse by the fact that some raw materials were not available. This created significant challenges for us, especially in the chemical sector. We even had to stop operations at our Novara plant in the latter part of the year. Products similar to ours in the nylon supply chain from China and the US were being sold at a price lower than our variable cost.”

The president continues: “At Group level, our internationalisation strategy helped us mitigate geopolitical risks in various countries. As a result, we were able to offset the challenges in the European chemicals and textile markets by leveraging our global presence in High Performance Polymers, where our numbers have held strong. As we began 2023, we regained our footing. However, the global economic and industrial scenario for the rest of the year remains highly uncertain, and forecasts are notably cautious.”

Even in these difficult times, the Group has continued to invest. In 2022, the High Performance Polymers Business Area completed the acquisition in India of the engineering plastics branch of Ester Industries Ltd, a listed company. Additionally, it began installing two new production lines in Mexico and Brazil, and confirmed plans to install a new extrusion line at the Villa d’Ogna production site in the province of Bergamo. These choices align with the Group’s goal of enhancing its worldwide presence and boosting competitiveness in high-potential growth markets. In a year where energy and raw material costs were certainly problematic, operating in geographically diverse markets and with varied applications proved to be an important tool in addressing the challenges. In this vein, a new production site spanning over 36,000 square metres has recently been inaugurated in China. The move is aimed at doubling the production capacity in line with the market’s growth expectations.

Extending the time horizon to 2018-2022, the Group has invested over EUR 277 million to enhance the competitiveness of its companies, implement Best Available Techniques, improve energy efficiency, reduce emissions, and conduct research and development activities aimed at introducing sustainable processes and solutions. These efforts include the research and development activities of Radici InNova, which are heavily focused on the circular economy.

More information:
RadiciGroup financial year 2022
Source:

RadiciGroup

ERCA successfully showcased latest product at ITMA 2023 (c) ERCA
Giusy Bettoni, Matt Swartz, Fabio Locatelli and Mike Maekawa after the talk
28.06.2023

ERCA successfully showcased latest product at ITMA 2023

ERCA successfully showcased their latest product during the recent ITMA 2023 exhibition, taking the opportunity to share with ITMA visitors the journey that stood behind the creation of REVECOL®.

REVECOL® transforms critical waste materials (exhausted vegetable oils) into a line of innovative and responsible chemical auxiliaries destined for the entire textile industry and its various applications, offering different characteristics: circular DNA, certification, safety, high performance, competitivity and applicability on any type of textile fiber, whether virgin or recycled.

Patagonia® and trim supplier YKK teamed up with ERCA to deploy REVECOL® in their manufacturing process. This alliance was presented to ITMA visitors as an example of what the industry can achieve through collaborative practices.

ERCA successfully showcased their latest product during the recent ITMA 2023 exhibition, taking the opportunity to share with ITMA visitors the journey that stood behind the creation of REVECOL®.

REVECOL® transforms critical waste materials (exhausted vegetable oils) into a line of innovative and responsible chemical auxiliaries destined for the entire textile industry and its various applications, offering different characteristics: circular DNA, certification, safety, high performance, competitivity and applicability on any type of textile fiber, whether virgin or recycled.

Patagonia® and trim supplier YKK teamed up with ERCA to deploy REVECOL® in their manufacturing process. This alliance was presented to ITMA visitors as an example of what the industry can achieve through collaborative practices.

The process of sharing REVECOL® with the industry really started with the announcement of ERCA’s partnership with Patagonia® and YKK and deepened during the session Upcycling Minds Think Alike moderated by Giusy Bettoni, CEO and Founder, C.L.A.S.S. (Creativity, Lifestyle and Sustainable Synergy), and which saw the participation of Matt Swartz, Color and Material Quality Manager of Patagonia®, Fabio Locatelli, Head of ERCA, Textile Specialties Business Unit and Mike Maekawa, Sales and Business Development Manager, YKK Vietnam.

Source:

ERCA

Mark von der Becke, Dr. Marina Crnoja-Cosic, Matthew North Photo Kelheim Fibres
26.06.2023

Kelheim Fibres: Change in Management Team

After nearly 30 years with the company, Matthew North, Commercial Director at the viscose specialty fibre manufacturer Kelheim Fibres, will retire on July 1, 2023. Throughout his long and successful career, he has played a significant role in transforming Kelheim Fibres from a supplier of standard fibres to the European textile industry into a supplier of predominantly customized specialty fibres for the hygiene, specialty paper, and textile industries.

Mark von der Becke will assume the position of Sales Director and become part of the management team at Kelheim Fibres. The 48-year-old brings extensive experience in sales, marketing, and key account management. He has held various leadership positions in renowned companies such as Hoechst, Clariant, and DS Smith in Germany, Switzerland, and China. He is known for successfully developing and implementing strategy and change programs.

After nearly 30 years with the company, Matthew North, Commercial Director at the viscose specialty fibre manufacturer Kelheim Fibres, will retire on July 1, 2023. Throughout his long and successful career, he has played a significant role in transforming Kelheim Fibres from a supplier of standard fibres to the European textile industry into a supplier of predominantly customized specialty fibres for the hygiene, specialty paper, and textile industries.

Mark von der Becke will assume the position of Sales Director and become part of the management team at Kelheim Fibres. The 48-year-old brings extensive experience in sales, marketing, and key account management. He has held various leadership positions in renowned companies such as Hoechst, Clariant, and DS Smith in Germany, Switzerland, and China. He is known for successfully developing and implementing strategy and change programs.

Dr. Marina Crnoja-Cosic, who has been serving as Director of New Business Development and a member of the management team at Kelheim Fibres since 2020, will take on the responsibility for marketing and communications. She will now drive the further development of the marketing strategy and communication with customers and partners.

Source:

Kelheim Fibres GmbH

23.06.2023

DOMO Chemicals publishes sustainability report

DOMO Chemicals, a global leader in polyamide-based engineered material solutions and services, has published its latest annual Sustainability Report, detailing progress on its sustainability journey, including notable reductions in greenhouse gas emissions. DOMO’s mission is to engineer polyamide solutions that contribute to a better, more sustainable world. In publishing its second annual Sustainability Report, DOMO enters a new phase in its decarbonization quest, with confidence in its long-term aspiration to set the standard for sustainability in the industry by 2030.

Notably, the Sustainability Report details DOMO’s achievements in 2022 toward realizing its 2030 sustainability goals. In terms of decarbonization and broader environmental achievements, against a 2019 baseline, the company:

DOMO Chemicals, a global leader in polyamide-based engineered material solutions and services, has published its latest annual Sustainability Report, detailing progress on its sustainability journey, including notable reductions in greenhouse gas emissions. DOMO’s mission is to engineer polyamide solutions that contribute to a better, more sustainable world. In publishing its second annual Sustainability Report, DOMO enters a new phase in its decarbonization quest, with confidence in its long-term aspiration to set the standard for sustainability in the industry by 2030.

Notably, the Sustainability Report details DOMO’s achievements in 2022 toward realizing its 2030 sustainability goals. In terms of decarbonization and broader environmental achievements, against a 2019 baseline, the company:

  • Reduced scope 1 and 2 greenhouse gas emissions by 27%, making significant progress toward its target of 40% reduction by 2030 and carbon neutrality by 2050
  • Increased renewable electricity throughout operations to 12%
  • Reduced waste by 24%
  • Lowered water intake by 4.5%

In addition, as a provider of polyamide-based sustainable and circular solutions, DOMO:

  • Achieved more than 11% of engineered materials sales based on sustainable feedstock, making excellent progress toward its 2030 target of 20%
  • Allocated 25% of research and development resources to enhanced recycling

Moreover, fostering talent and ensuring the well-being of its workforce as a responsible employer is essential for sustainable growth, and 2022 highlights include:

  • Increased share of women in senior positions from 22% in 2021 to 30% in 2022
  • Providing a safe and inclusive working environment that encourages personal and professional development as well as a global safety culture
Source:

DOMO Chemicals

(c) PrimaLoft, Inc.
16.06.2023

PrimaLoft, Inc. appoints new Sales Leadership in Europe and reorganizes Territories

PrimaLoft Inc., a leader in advanced material technology, announced the reorganization of its European sales management team. Effective June 1st, Leonardo Loro has promoted to the position of Sales Leader, Europe. Additionally, the company welcomes Mario Vlietinck as the new Territory Manager for France, Benelux & Denmark.

To further streamline operations and maximize opportunities, PrimaLoft is also implementing a territory reorganization to better align existing sales talent with market opportunities. These moves will strengthen the company’s sales strategy in the region.

PrimaLoft Inc., a leader in advanced material technology, announced the reorganization of its European sales management team. Effective June 1st, Leonardo Loro has promoted to the position of Sales Leader, Europe. Additionally, the company welcomes Mario Vlietinck as the new Territory Manager for France, Benelux & Denmark.

To further streamline operations and maximize opportunities, PrimaLoft is also implementing a territory reorganization to better align existing sales talent with market opportunities. These moves will strengthen the company’s sales strategy in the region.

Leonardo Loro will lead the European sales team and report directly to Chris Humphris, SVP, Global Sales. "With over a decade of experience as the sales and marketing manager for the southern European market, including France, Italy, Spain, and Portugal, Leonardo has demonstrated exceptional skills in building customer relationships and identifying new business opportunities. His invaluable contributions to our sales efforts make him the ideal candidate to lead and elevate our business in Europe", said Humphris. In his new leadership role, Loro will continue to manage brands in Italy and Spain, as well as military sales efforts in Europe.

Mario Vlietinck joins the PrimaLoft team and will be responsible for managing and developing business relationships with PrimaLoft brand partners in France, Benelux & Denmark. Vlietinck brings a wealth of knowledge in sales and the outdoor industry, previously serving as the head of Apparel & Footwear for Katoen Natie, as well as working for brands such as Reebok, Merrell, and Vannese. "Mario’s background in product development, business development, and international sales positions him as a great asset to our company goals,” said Humphris. Vlietinck will report to Leonardo Loro.

Sales Territory Reorganization
Wim Neels, VP of business development for fashion and lifestyle, will be responsible for all Fashion & Lifestyle brands across Europe, with the exception of Italy & Spain, which remain the responsibility of Leonardo Loro.

Bartosz Lassak will expand his territory responsibility to include outdoor performance brands in the United Kingdom, in addition to Eastern Europe and Turkey. He will also handle any opportunities from North Africa, as well as any brands located outside of other European coverage.

Valerie Raths Goesel will oversee the management of all outdoor performance brands in the Germany, Austria, and Switzerland region.

Mats Jengard will remain the territory manager for Scandinavia (Norway, Sweden, Finland & Iceland), focusing outdoor performance brands.

Source:

PrimaLoft, Inc.

02.06.2023

Carbios receives funding for PET biorecycling plant and R&D activities

Carbios will receive grants totaling €54 million from French State via France 2030 and Grand-Est Region to finance construction of world’s first PET biorecycling plant and accelerate R&D activities

Carbios announces that its project has been selected by the French State for funding of €30 million from the French State as part of the investment plan France 2030, and €12.5 million from the Grand-Est Region.  The implementation of this funding is conditional to the European Commission’s approval of the corresponding state aid scheme, followed by the conclusion of national aid agreements. As part of the national call for projects on “Plastics Recycling” operated by ADEME[1], Carbios’ project to finalize the industrialization of its unique PET biorecycling process has been selected. The reference plant in Longlaville in the Grand-Est region will be the world’s first PET biorecycling plant and is due for commissioning in 2025. This plant will make it possible to relocate to France the production of the two basic components of PET, PTA and MEG[2], both derived from the Carbios process.

Carbios will receive grants totaling €54 million from French State via France 2030 and Grand-Est Region to finance construction of world’s first PET biorecycling plant and accelerate R&D activities

Carbios announces that its project has been selected by the French State for funding of €30 million from the French State as part of the investment plan France 2030, and €12.5 million from the Grand-Est Region.  The implementation of this funding is conditional to the European Commission’s approval of the corresponding state aid scheme, followed by the conclusion of national aid agreements. As part of the national call for projects on “Plastics Recycling” operated by ADEME[1], Carbios’ project to finalize the industrialization of its unique PET biorecycling process has been selected. The reference plant in Longlaville in the Grand-Est region will be the world’s first PET biorecycling plant and is due for commissioning in 2025. This plant will make it possible to relocate to France the production of the two basic components of PET, PTA and MEG[2], both derived from the Carbios process.

Carbios also announces that it has been granted total funding of €11.4 million from the French State as part of France 2030, of which €8.2 million directly for Carbios (€5 million in repayable advances) and €3.2 million for its academic partners INRAE[3], INSA[4] and CNRS[5] via the TWB[6] and TBI[7] joint service and research units. This funding will enable to continue its research into the optimization and continuous improvement of Carbios’ enzymatic technologies.

The plant will secure the sales of the first volumes of recycled PET produced with Carbios’ technology, and to offer its partners recycled PET of the same quality as virgin PET. Once the necessary permits have been obtained, which should be granted by the end of 2023, in line with the announced start of construction before the end of the year, the plant is scheduled to be commissioned in 2025. This will be followed by a period of ramp-up to full capacity. The plant will have a nominal processing capacity of 50,000 tonnes of PET waste per year, equivalent to 2 billion bottles or 2.5 billion food trays.

Selection for funding by the French State through France 2030 and the Grand-Est Region complements the recent announcement of an exclusive, long-term partnership with Novozymes[8], a leader in enzyme production, one of the main aims is to ensure the supply of enzymes to Carbios’ Longlaville plant and future licensed plants. In addition, Carbios recently secured a first supply source for its future plant by winning part of the CITEO tender for the biorecycling of multilayer trays[9].


[1] The French Agency for Ecological Transition
[2] PTA = purified terephthalic acid; MEG = monoethylene glycol
[3] French National Research Institute for Agriculture, Food and the Environment
[4] French National Institute of Applied Sciences
[5] French National Center for Scientific Research
[6] Toulouse White Biotechnology – UMS INRAE 1337 / UAR CNRS 3582
[7] Toulouse Biotechnology Institute – UMR INSA/CNRS 5504 / UMR INSA/INRAE 792
[8] Cf. press release dated 12 January 2023
[9] Cf. press release published by Citeo dated 26 April 2023

More information:
Carbios biorecycling plastics France
Source:

Carbios

24.05.2023

SGL Carbon SE: Annual General Meeting 2023

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

After 14 years on the Supervisory Board of SGL Carbon, this was Dr. h.c. Susanne Klatten's last Annual General Meeting as Chairwoman of the Supervisory Board. She had already informed the Company on February 14, 2023, that she would be leaving the Board at the end of this Annual General Meeting. As the largest shareholder, Dr. h.c. Klatten will remain associated with SGL Carbon through SKion GmbH.

As proposed, the Annual General Meeting elected Prof. Dr. Frank Richter as a shareholder representative on the Supervisory Board to succeed Dr. h.c. Susanne Klatten. Following the Annual General Meeting, the constituent meeting of the Supervisory Board elected Prof. Dr. Richter as Chairman of the Supervisory Board. Prof. Dr. Richter is Managing Director of SKion GmbH, Bad Homburg, which holds a stake of approximately 28.55% in SGL Carbon SE. Furthermore, Ingeborg Neumann, Managing Partner of Peppermint Holding GmbH, Berlin, was elected to the Supervisory Board of SGL Carbon SE for a further term of office.

Source:

SGL Carbon SE

(c) Dibella GmbH
Marvin Groß-Hardt
24.05.2023

Dibella strengthens its sales team with Marvin Groß-Hardt

The Dibella sales team is growing. Since May 1st 2023, Marvin Groß-Hardt has been supporting the company's national and international customers.

Dibella welcomes Marvin Groß-Hardt, an experienced sales employee, to the team. The trained wholesale and foreign trade merchant and graduate in business administration brings many years of experience in supporting and advising customers. He is also familiar with the special features of contract textiles due to a previous position in product and sales management for hotel beds and bedding.

At Dibella, the 30-year-old from Bocholt is responsible for looking after existing customers and building up new customer relationships at home and abroad, and will establish new contacts.

The Dibella sales team is growing. Since May 1st 2023, Marvin Groß-Hardt has been supporting the company's national and international customers.

Dibella welcomes Marvin Groß-Hardt, an experienced sales employee, to the team. The trained wholesale and foreign trade merchant and graduate in business administration brings many years of experience in supporting and advising customers. He is also familiar with the special features of contract textiles due to a previous position in product and sales management for hotel beds and bedding.

At Dibella, the 30-year-old from Bocholt is responsible for looking after existing customers and building up new customer relationships at home and abroad, and will establish new contacts.

More information:
Dibella hotels Contract textiles
Source:

Dibella GmbH

(c) FET
FET’s Director of Technology, Mark Smith and new R&D Manager, Dr Jonny Hunter
17.05.2023

FET strengthens its technical team

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has strengthened its technical team with the appointment of Dr Jonny Hunter as Research & Development Manager. Hunter brings a wealth of academic credentials to the department, including a Master’s in Medicinal and Biological Chemistry and a PhD in Sustainable Chemistry. This academic background is complemented by over 10 years’ R&D experience in industry, including FMCG and, in particular, medical devices, which encompasses wound care, the medical device manufacturing process and regulatory environment.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has strengthened its technical team with the appointment of Dr Jonny Hunter as Research & Development Manager. Hunter brings a wealth of academic credentials to the department, including a Master’s in Medicinal and Biological Chemistry and a PhD in Sustainable Chemistry. This academic background is complemented by over 10 years’ R&D experience in industry, including FMCG and, in particular, medical devices, which encompasses wound care, the medical device manufacturing process and regulatory environment.

FET designs, develops and manufactures extrusion equipment for a wide range of high value textile material applications, so the above research and industrial sectors have great relevance to the company’s focus on the international stage. A significant market for FET’s meltspinning equipment is medical devices, so in-house expertise in this area is a vital commodity. FET is also at the forefront of innovation to promote and develop sustainable fibres, so technical knowhow in sustainability is also essential. In this, Jonny Hunter has considerable experience and has in the past lead a number of innovation projects in sustainable chemistry and management.

This fresh input of knowledge and experience will benefit FET’s customers in their own drive for sustainable innovation in fibre technology. Mark Smith, the previous R&D Manager, is taking a short sabbatical and will be returning in a more strategic role as FET’s Director of Technology, so his continued presence will further contribute to FET’s breadth of technical expertise.

FET has also expanded in a number of other departments to reflect the rapid growth in sales over recent years. Mike Urey is the new Sales Engineer, bringing a wide industrial experience and strengthening all aspects of business development. Three new mechanical and electronic engineers and a new appointment in the design department all combine to take the company forward and sustain growth.

Source:

Fibre Extrusion Technology Ltd (FET)

(c) Freudenberg Performance Materials Holding GmbH
Judith Marquant from fashion school Esmod in Paris during the presentation of her winning design
17.05.2023

Freudenberg Performance Materials Apparel: Winners of "Fashioning Sustainability"

A total of 20 European fashion and design schools took part in the 2nd “Fashioning Sustainability” competition organized by Freudenberg Performance Materials together with Macpi and Bemberg™ by Asahi Kasei, two co-branding partners in the textile industry.

Freudenberg invited talented young designers to create and submit their ideas for sustainable clothing. The initiative aims to show that sustainability is a key factor in the fashion industry.

Two of the most innovative outfits from each school were selected for the final round and presented to an international jury at the “Bagni Misteriosi” event location in Milan in May. Fashion design experts and opinion leaders as well as journalists were invited to select the most sustainable designs in the categories of “Technology” and “Design”.

A total of 20 European fashion and design schools took part in the 2nd “Fashioning Sustainability” competition organized by Freudenberg Performance Materials together with Macpi and Bemberg™ by Asahi Kasei, two co-branding partners in the textile industry.

Freudenberg invited talented young designers to create and submit their ideas for sustainable clothing. The initiative aims to show that sustainability is a key factor in the fashion industry.

Two of the most innovative outfits from each school were selected for the final round and presented to an international jury at the “Bagni Misteriosi” event location in Milan in May. Fashion design experts and opinion leaders as well as journalists were invited to select the most sustainable designs in the categories of “Technology” and “Design”.

The winners
First place in the “Technology” category went to Judith Marquant while the second to Jagoda Sokolowska, both students of the fashion school Esmod in Paris. Ilaria De Martino, from the fashion institute Modartech, Italy, and Xiaodan Liao from Polimoda, Italy, were awarded first and second place in the “Design” category. The first-place winners received €2,000, while the second places won €1,000.

All participants benefited from the platform to network with leading players in the garment industry and learn more about concrete steps for embracing sustainability. Creating true sustainability in the fashion industry means reducing the material flow of clothing, addressing both sustainable production and consumption.

Members of the Jury:
Cristiano Zanetti, Sales Director Italy, Freudenberg Performance Materials
Maurizio Cazzin, Male Modeller, Maison Giorgio Armani
Riccardo Bullio, Apparel Industrial Division Director, Dolce & Gabbana
Caterina Cuoghi, Industrial Director, Area NYC
Simone Bigi, Style and Product Office Manager FAY line, Gruppo TOD’S
Roberto Cibin, Model and Pattern Development Manager, Caruso
Bruno Landi, Sales Director, Vitale Barberis Canonico
Luisella Allegretti, Pattern Designer Boss MW Business Specialist, Hugo Boss
Eugenio Balordi, Product Manager, Maison Margiela
Ettore Pellegrini, Sales and Marketing Manager, Asahi Kasei Fibers Italia

Source:

Freudenberg Performance Materials Holding GmbH