From the Sector

• DOMOs neue NYLEO®-Marke vereint DOMOs Erfahrung mit Nylon 66-basierten Fasern und legt mit drei neuen Produkten den Schwerpunkt auf Innovation
• NYLEO® PROTECT steht für verbesserten Flammschutz, NYLEO® 4EARTH® ist der Name für verbesserte biologische Abbaubarkeit und NYLEO® SAFE zeichnet sich durch bakteriostatische Eigenschaften aus
• NYLEO® repräsentiert einen neuen Meilenstein in DOMOs wachsendem Angebot an nachhaltigen Lösungen

NYLEO® ist DOMOs neue Produktlinie und kombiniert bewährte Hochleistungsfasern mit bahnbrechenden neuen Lösungen. NYLEO® auf Nylon 66-Basis wird in zahlreichen Anwendungen eingesetzt, darunter Textilien, Bodenbeläge sowie Flock- und Schleifmittel. Aufgrund seiner Eigenschaften bietet NYLEO® ein breites Spektrum an Möglichkeiten für die Verbesserung der Produktleistung.

DOMOs NYLEO® setzt auf unsere Erfahrungen mit Nylon 66-basierten Fasern und legt mit drei Produkten den Schwerpunkt auf Innovation: NYLEO® PROTECT mit verbessertem Flammschutz, NYLEO® 4EARTH® mit verbesserter biologischer Abbaubarkeit und NYLEO® SAFE mit bakteriostatischen Eigenschaften.

DOMOs Erbe an innovativen Nylon 66-Fasern
DOMOs Team für Hochleistungsfasern hat seinen Sitz im französischen Valence. DOMO produziert seit 1955 PA66-Fasern für Anwendungsbereiche wie Schleifmittelvliese, Luftfahrt, Teppichböden, Hochleistungstextilien, Flock für Polstermöbel, Innenausstattung und -böden von Autos sowie viele weitere Verbraucherprodukte. Die NYLEO® Marke wird nun auf das gesamte Portfolio an Polyamid 66 (PA 66)-Faserprodukten, einschließlich gekräuseltem TOW oder TOW für die Flockherstellung, angewendet. Fasern auf Basis von PA66 sind für hohe Widerstandsfähigkeit, hervorragende Verschleiß- und Abriebfestigkeit, hohe Zähigkeit, ausgezeichnete Färbbarkeit und Farbechtheit sowie einheitliche Qualität und weiche Haptik bekannt. Dazu gehören:

• NYLEO® PROTECT – um das Sicherheitsniveau in den Bereichen persönliche Schutzausrüstung, Bekleidung, Möbel und Transport zu erhöhen, hat DOMO eine neue flammhemmende PA 66-Faser entwickelt. NYLEO® PROTECT vereint alle Vorteile von PA 66, wie z. B. mechanische Eigenschaften, Komfort, geringes spezifisches Gewicht und hervorragende Abriebfestigkeit, mit verbessertem Flammschutz. Der Sauerstoffindex (LOI) von NYLEO® PROTECT wurde auf 28 % verbessert, was dem Niveau typischer flammhemmender Fasern entspricht.
• NYLEO® 4EARTH® – immer mehr Hersteller befassen sich mit den Themen Nachhaltigkeit und Kreislaufwirtschaft und versuchen ihren Einfluss auf die Umwelt weitmöglichst zu verringern, z. B. durch ein besseres Abfallmanagement. Die textile Wertschöpfungskette hat starken Anteil an den Mülldeponien, auf denen die meisten Kleidungsstücke enden. Aus diesem Grund entwickelte DOMO mit NYLEO® 4EARTH® eine Faser, die auf Deponien besser biologisch abgebaut wird. Während traditionelle Nylon 66-Fasern 50 – 100 Jahre für den Zerfall benötigten, braucht NYLEO® 4EARTH aufgrund seiner verbesserten biologischen Abbaubarkeit nur fünf Jahre, um abgebaut zu werde.
• NYLEO® SAFE – die Verbreitung von Bakterien hat sich zu einem immer dringlicheren Gesundheitsproblem entwickelt. Bei NYLEO® SAFE wird ein bakteriostatisches Mittel in die Polymermatrix eingebracht, wo es die Fasern langfristig schützt und das Wachstum von Bakterien verhindert.

Eurotay showcased at Denim Première Visionits vision and products through the AW 23/24 collection inspired by two themes: Nostalgia and #Still Possible.

Nostalgia stands for heritage and advancement, taking inspiration from classic favorites while enhancing new and existing styles. Setting the tone of the line are vintage-looking washes, echoing the 80s and 90s light acid washes as well as used look with bumped edges or fringed hems. Stretch, comfort stretch with very little elastane and even rigid denim feature in this collection providing catering to any need or preference.

The #Still Possible collection is based on the premise that the textile industry is one of the most polluting ones on the planet, thus it aims to shine a light on how a denim garment can still be made whilst reducing the number of resources employed and by being more conscious about the materials chosen. By using EIM and LCA, garment durability, traceability, recyclability as well as material health are guaranteed, for a collection that looks to a brighter and greener future.

Eurotay has been committed from day one to using less water, less energy, less chemicals to reduce its environmental footprint and its carbon emission and meet the goals of EU Green Deal targets. The company is geared towards building a more and more responsible industry by working hard to reach a set of sustainable goals by 2025. Additionally, the company is working on developing Life Cycle Assessment (LCA) and EPD (Environmental Product Declaration) measuring the global warming, water consumption, land occupation, eutrophication and abiotic depletion performances.

• DOMOs neuer Service deckt das globale Produktportfolio von Werkstoffen für den Spritzguss ab.
• DOMO Engineered Materials ermöglicht den direkten Zugriff auf die stets aktuelle Materialdatenbank für Spritzgusssimulationen, sodass Kunden jederzeit die aktuellsten, umfangreichsten und validierten TECHNYL®-Werkstoffdaten einsehen können.
• Dieser neue Service für schnellere Projektentwicklungszeiten wird am 12. Mai 2022 freigeschaltet.

Bisher mussten Anwender, die die neuesten Datenbanken für Spritzgussanwendungen von den jeweiligen Anbietern erhalten wollten, auf ein Update der Simulationssoftware warten. Von der Verfügbarkeit neuer Materialien bis zur Aktualisierung der öffentlichen Datenbanken verging beträchtliche Zeit – mitunter mehr als ein Jahr. Darüber hinaus mussten sich Anwender regelmäßig an verschiedene Kontakte wenden, um von Materialanbietern Auskünfte über die neuesten verfügbaren Ressourcen einzuholen.

DOMO ermöglicht es seinen Kunden jetzt mit regelmäßigen Aktualisierungen der Datenbank für Autodesk Moldflow einen wertvollen neuen Service zu erhalten. Auf Anfrage werden auch Spritzgussmaterialdaten für andere Softwarelösungen (Moldex3D, CADmould usw.) von unserem Sales und Technical Manager zur Verfügung gestellt.

Da Kunden so stets die neuesten Materialdaten für Spritzgusssimulationen zur Hand haben, können sie Zeit und Mühe bei der Generierung der notwendigen Daten für ihre Projekte sparen. Diese validierten Messdaten für präzisere Simulationen ermöglicht den Kunden, ihre Entwicklungszeiten zu verkürzen und Produkte schneller auf den Markt zu bringen.

Darüber hinaus umfassen diese direkten Aktualisierungen auch neue Werkstoffe aus DOMOs Entwicklungspipeline sowie neue validierte Daten, die über die gewöhnliche Vorgehensweise von Spritzgussanwendungen hinausgehen und beispielsweise die Optimierung der Vorhersage von Faserausrichtungen erlauben.

• with a ready-to-use swatch book dedicated to its DEEP DIVE sustainable dyeing system for dark, popular color basics

Archroma, a global leader in specialty chemicals towards sustainable solutions, launches its first ever ready-to-use swatch book, dedicated to creating sustainable black and dark color basics for faster time to market, to support its popular DEEP DIVE 2.0 system.

In 2018, Archroma launched its system solutions, a holistic approach aimed at addressing the growing expectations of the public in terms of keeping consumers, and the environment, safe.
Under the umbrella of "The Archroma Way to a Sustainable World: Safe, efficient, enhanced, it's our nature", the Archroma systems are designed to create innovation and performance, whilst reducing the impacts on water, energy and other natural resources. The savings generated by these 70+ system solutions are demonstrated by Archroma's proprietary ONE WAY Impact Calculator, a ground-breaking tool launched in 2012 and continuously upgraded to simulate and optimize the footprint of textile application processes.

One of these systems, DEEP DIVE 2.0, has attracted a lot of interest not just from textile manufacturers but also from major brands and retailers worldwide. This popular system combines Drimaren® Ultimate HD, high-performance reactive dyes, with Blue Magic, an all-in-one pretreatment, Optifix® RUB New liq and Siligen® SIH-S New liq, a finishing treatment improved rub fastness and elegant hand feel, and an effective hydrolyzed dye remover, Cyclanon® XC-W New liq. The result is a shorter dyeing process combining right-first-time productivity, an improved fabric quality for longer lasting end-articles, as well as dramatically reduced water and energy utilization for brands committed to drive more sustainable production. Savings can reach up to 31% water and 34% energy.

The system is ideally suited for medium and dark cottons that have high performing fastness to light, multiple home laundering, saliva – in other words: apparel used for fashion, sports and baby’s wear.
At the same time, interested manufacturers and brands were facing the constant challenge of the fashion industry: time to market.

Often design is separated from execution in the factory and as such often designers initially select color that cannot be met in reality on different fibers or production routes in terms of color flare, metamerism, brightness, depth and now sustainable metrics – leading to lengthy delays and compromises in function, performance and/or color.
Archroma decided to create a dedicated tool aimed at addressing these issues. The company developed a new, unique book with color swatches made with the system that is ready to implement immediately into production thanks to engineered color standards and specifications.

This new tool offers a path to bridge the gap between “art and science” by providing at inspiration phase fully executable deep colors for cotton with controlled color metamerism and at the same time demonstrate water, energy and chemical savings, enhanced color fastness using safe chemistry for the end consumer. As a wardrobe staple, medium to dark shades are very popular with consumers. As a result, most brands and retailers often have and sell up to 60% of medium to dark shades in their seasonal palettes. It’s also the dark shades that use the most water and energy in production, so prioritizing these colors would have the largest ecological positive impact. The 48 colors swatched in the DEEP DIVE 2.0 book have been selected based on market popularity to allow brands and manufacturers to match that very stable market demand. Customers may use these colors as presented, or as inspiration whereby Archroma can create and match new custom colors using the DEEP DIVE 2.0 system.

Christophe Maestripieri, Global Head of the Archroma Brand Studio, the company’s department dedicated to support brands’ projects and innovations, explains: “We wanted to make sure our partners have all the tools they need to convert to more sustainable colors. We had the ideal dyeing system to do that, DEEP DIVE 2.0, with its high performance and reduced impacts on resources. Now, with the new DEEP DIVE 2.0 swatch book, we also offer to brands and manufacturers a way to select sustainable color options that meet the market demand for high quality medium to dark shades which can be implemented into production right away.”

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

• The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
• Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

The global demand for polyamide materials is currently booming at a CAGR of up to 3 percent. The adoption of new energy vehicles (including pure electric, hybrid and fuel cell vehicles) is expected to reach 45 percent globally by 2030, and automakers are increasingly using sustainable materials to make components, which are key growth drivers of the polyamide market. In addition, the demand for miniaturized circuit breakers, contactors, plug switches, and other components in the electrical and electronics and industrial consumer goods industries further opens up the application potential for polyamide materials.

DOMO Chemicals will continue to expand the capacity of its production site in Jiaxing, Zhejiang Province, which has been planned to be gradually introduced in three stages:

• Since March 2022, an additional 6,000 tons of capacity has been made available, with the plant achieving the total capacity of 14,000 tons of PA6 from April onwards.
• A 35,000-ton new plant in Haiyan is planned to be completed in the third quarter of 2023, in which DOMO Chemicals has invested more than 14 million euros (97 million yuan).
• Going forward, DOMO Chemicals will further expand the plant, gradually increasing its capacity to 50,000 tons.

In addition to the expansion, the plant will also use renewable energy wherever possible, adopt advanced water and air treatment technologies to reduce water consumption and CO2 emissions, and fully comply with Health, Safety and Environmental Management System (HSE) regulations. DOMO Chemicals will improve HSE compliance continuously and work closely with the local government, while partnering with key local and global customers to accelerate innovation and development across a wide range of industries.

TECHNYL® has been committed to helping customers improve their low-carbon competitiveness since its very first year in China. It allows OEMs and component makers in the automotive, electrical & electronics, and industrial consumer goods segments to create lightweight, durable, aesthetically pleasing, smart and environmentally-friendly products.

With its current position paper, the Industrievereinigung Chemiefaser e.V. takes a stand on the intense discussions about an embargo against Russian natural gas supplies. The association believes that Germany's economic and global political future can only be secured with a strong industrial base and therefore, weighing up all positions and influencing factors and assessing the consequences for labour and the market economy, cannot support a short-term natural gas embargo on Russia.

An interruption of the continuous supply of natural gas would result in immense losses for the chemical fibre companies, which could even lead to the destruction of the industry in Germany. The losses are made up of technical damage caused by an uncoordinated shutdown of plants on the one hand and market-related consequential damage caused by lost production and a lack of product sales on the other.

Depending on the location and size of the plants, a short-term outage due to a lack of natural gas would result in average losses of EUR 5 million/plant. In addition, an ongoing daily loss would have to be expected which could be in the order of e.g. 250 000 EUR/day/plant, depending on the location. Furthermore, restarting the plants is questionable if supply chains could no longer be serviced and customers globally look for other suppliers in the meantime. Thus, entire sites would be at risk. With China's global market share in man-made fiber production already exceeding 70 %, a scenario is more than realistic that China will also take over these supply chains, thus leading to an even greater dependence on China.

The vast majority of power plants used for the production of man-made fibers, especially the highly efficient combined gas-and-steam power plants based on the principle of cogeneration with efficiencies of 90 %, are designed exclusively for the use of natural gas. Quite often, there are no technical facilities for operating gas turbines or steam boilers with fuels other than natural gas. Only in exceptional cases could a switch be made to mineral oil. However, even in these cases, the necessary stockpiling of mineral oil is designed only for a short-term failure of the gas burners. A change to base-load supply with mineral oil could take a time window of between 3 and 56 months, depending on the type of plant and taking into account licensing requirements. The use of hydrogen as an energy source is only possible in the very long term. In the few cases where natural gas can be substituted, investment costs of EUR 250 million/plant can be incurred, depending on the emission level of the converted plant.

A natural gas embargo imposed by the European Union on the Russian Federation would not only mean the cessation of production and the end for man-made fiber producers, but also for other industries such as basic chemicals, paper, metal production and glass and ceramics manufacturing, as well as their related sectors. As the German economic institute Institut der Deutschen Wirtschaft Köln e. V. (IW Köln) concluded in its summary report 40/2022 of April 2022: "No one can accurately predict what future these businesses would then still have in Germany. That would be an unprecedented development."

Cone Denim®, a leader in denim authenticity and sustainable innovation, launches a new U.S. grown hemp denim collection in collaboration with expert hemp processing innovator, BastCore. Cone is excited to expand its sustainable denim offerings and increase its support of the American agriculture industry, featuring denim made with Alabama hemp and U.S. cotton and dyed with natural indigo grown in Tennessee.

Cone Denim is honored to partner with BastCore, a team that aligns with Cone’s values and its commitment to innovation, quality, sustainability, and traceability. The pioneers at BastCore have created patent-pending technology and a proprietary process that produces clean, mechanically processed, OEKO-TEX® STANDARD 100 certified and USDA bio-preferred hemp fiber out of its operation in Montgomery, Alabama.

Cone’s U.S. Hemp Collection includes a range of fabrics featuring classic 3×1 and comfort stretch to modern workwear constructions. The collection further expands upon Cone’s sustainability and traceability practices, driving the future of the industry. The proximity of the hemp, indigo, and cotton crops in the U.S. to the company’s mills in Mexico is also key in creating the smallest environmental impact and footprint possible.

Hemp offers many key benefits in creating the next level of sustainable denim:

• More than 50% water savings occur, compared to cotton
• No chemicals, wet processing, pesticides, or herbicides are used
• Hemp grows in a variety of soils with excellent biodegradability, is antimicrobial, has high tensile strength, moisture regain content, and tenacity
• Hemp and natural indigo crops have high rates of carbon sequestration, which ultimately benefits the environment and improves the soil’s health for other crops (climate positive)

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

• Indorama Ventures completes acquisition of Brazil-based Oxiteno, extending growth profile into attractive surfactant markets

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, today completed its acquisition of 100% of Brazil-based Oxiteno S.A. Indústria e Comércio, becoming a leading global supplier in high-value surfactant markets.

The acquisition of Oxiteno, formerly a subsidiary of Ultrapar Participações S.A., was announced in August 2021 and is effective from 1 April 2022 after the transaction was approved by Brazil’s Administrative Council for Economic Defense (CADE). Through the acquisition, IVL extends its growth profile into highly attractive markets in Latin America and the U.S., becoming the leading surfactants producer in the Americas, with additional potential to expand in Europe and Asia.

Oxiteno becomes part of IVL’s Integrated Oxides and Derivatives (IOD) business segment, which IVL formed in 2020 with the purchase of assets from U.S.-based Huntsman (Spindletop transaction). IOD is a high-margin growth driver alongside IVL’s traditional Combined PET (CPET) necessities segment and its Fibers segment. Together, IVL’s three segments create a stronger and more resilient integrated platform along the company’s petrochemicals value chain.

The Oxiteno acquisition includes 11 manufacturing plants in Latin America and the U.S., 5 R&D centers, an experienced management team, a strong environmental governance record, and expertise in green chemistry innovation. Through Oxiteno, IOD assumes a leading position in technologies catering to innovation-led, high-value-add (HVA) surfactant solutions in attractive home & personal care, crop solutions, and coating & resources markets. This diversity increases IOD’s earnings stability and resilience. The surfactants market has seen consistent growth over the last decade, driven by trends in population growth, urbanization and increasing hygiene awareness amid the global pandemic.