From the Sector

Reset
1339 results
(c) nova-Institut GmbH
24.01.2023

Six nominees for„Cellulose Fibre Innovation of the Year 2023“

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

Here are the six nominees
Vybrana – The new generation banana fibre – GenCrest Bioproducts (India)

Vybrana is a Gencrest’s Sustainable Cellulosic Fibre upcycled from agrowaste. Raw fibres are extracted from the Banana Pseudo stem at the end of the plant lifecycle. The biomass waste is then treated by the Gencrest patented Fiberzyme technology. Here, cocktail enzyme formulations remove the high lignin content and other impurities and help fibre fibrillation. The company's proprietary cottonisation process provides fine, spinnable cellulose staple fibres suitable for blending with other staple fibres and can be spun on any conventional spinning systems giving yarns sustainable apparel. Vybrana is produced without the use of heavy chemicals and minimized water consumption and in a waste-free process where balance biomass is converted to bio stimulants Agrosatva and Bio Fertilizers & organic manure.

HeiQ AeoniQ™ – technology for more sustainability of textiles – HeiQ (Austria)
HeiQ AeoniQ™ is the disruptive technology and key initiative from HeiQ with the potential to change the sustainability of textiles. It is the first climate-positive continuous cellulose filament yarn, made in a proprietary manufacturing process and the first to reproduce the properties of polyester and nylon yarns in a cellulosic, biodegradable, and endlessly recyclable fibre.
HeiQ AeoniQ™ can be manufactured from different cellulosic raw materials such as pre- and post-consumer textile waste, biotech cellulose, and non-valorized agricultural waste, such as ground coffee waste or banana peels. It naturally degrades after only 12 weeks in the soil. Each ton of HeiQ AeoniQ™ saves 5 tons of CO2 emissions. The first garments made with this innovative cellulosic filament fiber were commercially launched in January 2023.

TENCEL™ LUXE – lyocell filament yarn – Lenzing (Austria)
TENCEL™ LUXE is LENZING’s new versatile lyocell yarn that offers an urgently needed sustainable filament solution for the textile and fashion industry. A possible botanical alternative for silk, long-staple cotton, and petrol-based synthetic filaments, is derived from wood grown in renewable, sustainably managed forests, and produced in an environmentally sound, closed-loop process that recycles water and reuses more than 99 % of organic solvent. Certified by The Vegan Society, it is suitable for a wide range of applications and fabric developments, from finer high fashion propositions to denim constructions, seamless and activewear innovations, and even agricultural and technical solutions.

Nullarbor™ – Nanollose & Birla Cellulose (Australia/India)
In 2020, Nanollose & Birla Cellulose started a journey to develop and commercialize tree-free lyocell from bacterial cellulose, called Nullarbor™. The name derives from the Latin “nulla arbor” which means “no trees”. Initial lab research at both ends led to a joint patent application with the patent “production of high-tenacity lyocell fibres made from bacterial cellulose”.
Nullarbor is significantly stronger than lyocell made from wood-based pulp; even adding small amounts of bacterial cellulose to wood pulp increases the fibre toughness. In 2022, the first pilot batch of 260kg was produced with 20 % bacterial pulp share. Several high-quality fabrics and garments were produced with this fibre. The collaboration between Nanollose & Birla Cellulose now focuses on increasing the production scale and amount of bacterial pulp in the fibre.

Circulose® – makes fashion circular – Renewcell (Sweden)
Circulose® made by Renewcell is a branded dissolving pulp made from 100 % textile waste, like worn-out clothes and production scraps. It provides a unique material for fashion that is 100 % recycled, recyclable, biodegradable, and of virgin-equivalent quality. It is used by fibre producers to make staple fibre or filaments like viscose, lyocell, modal, acetate or other types of man-made cellulosic fibres. In 2022, Renewcell, opened the world’s first textile-to-textile chemical recycling plant in Sundsvall, Sweden – Renewcell 1. The plant will eventually reach 120,000 tons of annual capacity.

Sparkle sustainable sanitary pads – Sparkle Innovations (United States)
Globally, around 300 billion period products are discarded every year, resulting in millions of tons of non-biodegradable waste. Since most conventional sanitary pads contain up to 90 % plastics, they do not biodegrade for around 600 years. Sparkle has designed sustainable, plastic-free, biodegradable and compostable Sparkle sanitary pads. From product to packaging, they are made up of around 90 % cellulose-based materials with top sheet, absorbent core, release paper, wrapping paper and packaging made of cellulose-based fibres. Whether Sparkle pads end up in a compost pit, are incinerated or end up in a landfill, they are a more sustainable alternative compared to conventional pads that contain large amounts of plastics, complex petro-chemical based ingredients and artificial fragrances. When tested according to ISO 14855-1 by a leading independent lab in Europe, Sparkle pads reached over 90 % absolute biodegradation within 90 days in commercial composting conditions.

20.01.2023

Asia meets EMEA: Assyst and Style3D join forces

  • Style3D is sole shareholder of Assyst
  • Integration of both product lines from 3D design to production
  • Assyst remains independent within Style3D

Assyst GmbH is as of now part of Style3D. The German fashion technology market leader and the leading 3D software company are joining forces. For Assyst customers and partners nothing will change.
 
Die Assyst GmbH betreibt ihre Geschäfte weiterhin eigenständig, entwickelt alle ihre Produkte weiter und strebt mit Style3D eine gemeinsame, durchgängige Produktwelt an. Der erste gemeinsame Auftritt des Assyst-Style3D-Teams findet bereits auf der Assyst Experience im Rahmen der Munich Fabric Start (24.-26. Januar 2023) statt.

Assyst will continue to operate its business independently and to develop, sell, and service all its existing products. Style3D and Assyst will start to integrate their products into a universal, seamless product world. The Assyst-Style3D team will make its first joint appearance already at the end of January at the Assyst Experience at Munich Fabric Start (24-26 January 2023).

  • Style3D is sole shareholder of Assyst
  • Integration of both product lines from 3D design to production
  • Assyst remains independent within Style3D

Assyst GmbH is as of now part of Style3D. The German fashion technology market leader and the leading 3D software company are joining forces. For Assyst customers and partners nothing will change.
 
Die Assyst GmbH betreibt ihre Geschäfte weiterhin eigenständig, entwickelt alle ihre Produkte weiter und strebt mit Style3D eine gemeinsame, durchgängige Produktwelt an. Der erste gemeinsame Auftritt des Assyst-Style3D-Teams findet bereits auf der Assyst Experience im Rahmen der Munich Fabric Start (24.-26. Januar 2023) statt.

Assyst will continue to operate its business independently and to develop, sell, and service all its existing products. Style3D and Assyst will start to integrate their products into a universal, seamless product world. The Assyst-Style3D team will make its first joint appearance already at the end of January at the Assyst Experience at Munich Fabric Start (24-26 January 2023).

Both companies are deeply rooted in apparel development and production: Style3D in Asia and Assyst in EMEA. Together, they are planning to create a global product offering for producers and brands that covers the entire apparel value chain from development to production and the various sales touchpoints.

Starting point will be the integration of the flagship products of both companies – Style3D and Assyst.CAD. Style3D is currently the most advanced 3D fashion design software with a high growth rate globally. While Assyst is market leader with its 2D CAD technology in Germany, Austria, Italy and Switzerland and offers a seamless software portfolio from 2D and 3D CAD to production (Automarker) and to all sales touchpoints.

Major driver of the merger is the companies’ complimentary technology offering and the vision to create a seamless digital process from providing digital fabric and accessories up to the realization of products.

The merger also strengthens Assyst's competitive position in the 3D design sector. Style3D, in turn, will benefit from Assyst's expertise in the development, CAD and digital simulation of apparel products and the access to the international market.

Looking ahead to the future, both parties will offer 2D-based & 3D-based one-stop solutions for business clients leveraging on their global tech base and complementary serviceable resource dominance. On January 24-26, the Assyst-Style3D team will meet clients and present its products at the Assyst Experience at Munich Fabric Start.

Source:

Assyst GmbH

20.01.2023

Autoneum: Revenue growth in 2022

For the first time in two years, global automotive production recorded a significant increase in full-year 2022 with 82.0 million vehicles produced (2021: 77.2 million vehicles) and growth of 6.2%, driven by the regions Asia and North America, but remained below 2019 levels.
Autoneum's revenue in local currencies increased significantly by 8.5%, largely due to inflation-related compensation. In the regions Europe and Asia, Autoneum's production volumes developed below market. Compared to the July 2022 estimate, revenue was around CHF 90 million lower than assumed due to volume factors. The strong fluctuations in production volumes due to vehicle manufacturer supply chain issues continued in 2022 and were exacerbated by the war in Ukraine in Europe and by COVID-related lockdowns in Autoneum's Asian main market China. Consolidated revenue in Swiss francs increased by 6.1% year-on-year to CHF 1 804.5 million (2021: CHF 1 700.4 million) due to the strong Swiss franc.

For the first time in two years, global automotive production recorded a significant increase in full-year 2022 with 82.0 million vehicles produced (2021: 77.2 million vehicles) and growth of 6.2%, driven by the regions Asia and North America, but remained below 2019 levels.
Autoneum's revenue in local currencies increased significantly by 8.5%, largely due to inflation-related compensation. In the regions Europe and Asia, Autoneum's production volumes developed below market. Compared to the July 2022 estimate, revenue was around CHF 90 million lower than assumed due to volume factors. The strong fluctuations in production volumes due to vehicle manufacturer supply chain issues continued in 2022 and were exacerbated by the war in Ukraine in Europe and by COVID-related lockdowns in Autoneum's Asian main market China. Consolidated revenue in Swiss francs increased by 6.1% year-on-year to CHF 1 804.5 million (2021: CHF 1 700.4 million) due to the strong Swiss franc.

Revenue development in the regions
In local currencies, revenue of Business Group Europe increased by 2.7%, while production volumes of vehicle manufacturers decreased by 1.3%. The growth in revenue resulted from inflation compensation, while Autoneum's production volumes were significantly lower compared to the previous year. Business Group North America increased its revenue in local currencies by 11.0%. The number of vehicles produced increased by 9.7% year-on-year. Volume development at Autoneum’s North American plants clearly improved compared with 2021 due to the allocation of semiconductors to the vehicle models supplied by Autoneum. Revenue of Business Group Asia declined by 2.7% in local currencies, and thus was significantly below the market (+7.7%). Autoneum's production facilities in its main market China are located in regions that were hit particularly hard by the COVID-related lockdowns. Growth in China was also driven by Chinese vehicle manufacturers, with whom Autoneum generated only little revenue last year.
Business Group SAMEA (South America, Middle East and Africa) achieved hyperinflation-adjusted revenue growth in local currencies of 65.2% year-on-year. This increase was mainly due to inflation compensation and in terms of volume slightly outperformed the market, which grew by 7.5%.

Due to significantly lower production volumes in Autoneum's regions Europe and Asia of around CHF 90 million compared to the half-year estimate and further increases in energy costs in the second half of the year, Autoneum expects the full-year 2022 result to be at the lower end of the guidance published on June 15, 2022.

The full year-end financial statements and the Annual Report 2022 will be presented at the Media Conference on March 1, 2023.

Source:

Autoneum Management AG

18.01.2023

SHIMA SEIKI presents WHOLEGARMENT® knitting at Pitti Filati

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 92nd edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the new SWG-XR®154 and N.SVR®183 computerized flat knitting machines as well as APEXFiz® design software.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 92nd edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the new SWG-XR®154 and N.SVR®183 computerized flat knitting machines as well as APEXFiz® design software.

As pioneer of seam-free WHOLEGARMENT® knitting, SHIMA SEIKI has been setting the standard almost exclusively with nearly 30 years of experience in complete garment technology. Now that benchmark has been raised once again with its new SWG-XR® flagship WHOLEGARMENT® knitting machine. SWG-XR® features 4 needle beds for all-needle knitting of high quality WHOLEGARMENT® products using the company's original SlideNeedle®. SWG-XR® features a renewed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity of more than 25% over the previous MACH2®XS machine, as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit with the MACH2® series. SWG-XR® sets new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting.

A new proposal in WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR®183 WHOLEGARMENT® knitting machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in ultrafine gauge. N.SVR®183 is equipped with the R2CARRIAGE® system and a compact, lightweight carriage for even higher productivity. Shown in 21G at Pitti Filati 92, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

APEXFiz® subscription-based design software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz® thereby helps to realize sustainability and digitally transform the fashion supply chain.

Source:

SHIMA SEIKI MFG., LTD.

Photo: Perstorp
Ib Jensen (right) takes over from Jan Secher (left) as new CEO of Perstorp Group.
18.01.2023

Ib Jensen takes over from Jan Secher as new CEO of Perstorp Group

Effective March 1st, Ib Jensen takes over from Jan Secher as Chief Executive Officer of Perstorp Group, a specialty chemicals company headquartered in Malmö, Sweden and since 2022 part of PETRONAS Chemicals Group Berhad (PCG).

Ib Jensen is a highly respected senior industry executive with a long career as CFO and extensive experience from M&A and integration of acquired companies, something that will be required in the next phase for Perstorp.

After more than 9 successful years as the CEO of Perstorp Group, Jan Secher has decided to step down. This decision is based on a personal direction set more than a year ago, prior to the acquisition by PCG, allowing for a full search process to be conducted for his replacement. Ib Jensen has been CFO of Perstorp for the past year and was considered the most qualified candidate based on his knowledge of the company, long term experience of the specialty chemicals industry and high level of appreciation in both Perstorp as well as in PCG. Previous experience include CFO and executive roles within Finance and IT at companies such as Arxada, Lonza, Syngenta, Danisco and LEGO.

Effective March 1st, Ib Jensen takes over from Jan Secher as Chief Executive Officer of Perstorp Group, a specialty chemicals company headquartered in Malmö, Sweden and since 2022 part of PETRONAS Chemicals Group Berhad (PCG).

Ib Jensen is a highly respected senior industry executive with a long career as CFO and extensive experience from M&A and integration of acquired companies, something that will be required in the next phase for Perstorp.

After more than 9 successful years as the CEO of Perstorp Group, Jan Secher has decided to step down. This decision is based on a personal direction set more than a year ago, prior to the acquisition by PCG, allowing for a full search process to be conducted for his replacement. Ib Jensen has been CFO of Perstorp for the past year and was considered the most qualified candidate based on his knowledge of the company, long term experience of the specialty chemicals industry and high level of appreciation in both Perstorp as well as in PCG. Previous experience include CFO and executive roles within Finance and IT at companies such as Arxada, Lonza, Syngenta, Danisco and LEGO.

Jan Secher remains in the CEO role until March 1st and will thereafter serve as an advisor to the new CEO and the Chairman, focusing on strategy and transferring external relationships. Monica Jönsson, currently deputy CFO, will take on the role as CFO when Ib Jensen assumes the position as CEO. PCG is fully committed to the Executive Leadership Team of Perstorp and expects the team to continue the successful integration work as well as dealing with the volatile global macro situation.

More information:
Petronas
Source:

Perstorp

(c) FET Ltd
17.01.2023

FET looks forward following sucessful year

Fibre Extrusion Technology Limited (FET) of Leeds, England, a supplier of laboratory and pilot melt spinning systems, is celebrating a record breaking year of sales and product innovation. “Sales revenue for 2022 has easily beaten our previous high” said FET Managing Director, Richard Slack “and the research projects we have collaborated in have become increasingly challenging in terms of technical specification.”

Prestigious new projects during 2022 included a multifilament melt spinning line for Senbis Polymer Innovations, Netherlands enabling the development of textile fibres from recycled polymers or biopolymers; a FET-200LAB wet spinning system at the University of Manchester which will play a major part in advanced materials research in collaboration with the renowned Henry Royce Institute; and a FET-103 Monofilament line for RHEON LABS of London to help develop a hyper viscoelastic fibre from RHEON™ which displays high strain-rate sensitive properties. The latter two of these examples were aided by significant UK grants to develop advanced materials.

Fibre Extrusion Technology Limited (FET) of Leeds, England, a supplier of laboratory and pilot melt spinning systems, is celebrating a record breaking year of sales and product innovation. “Sales revenue for 2022 has easily beaten our previous high” said FET Managing Director, Richard Slack “and the research projects we have collaborated in have become increasingly challenging in terms of technical specification.”

Prestigious new projects during 2022 included a multifilament melt spinning line for Senbis Polymer Innovations, Netherlands enabling the development of textile fibres from recycled polymers or biopolymers; a FET-200LAB wet spinning system at the University of Manchester which will play a major part in advanced materials research in collaboration with the renowned Henry Royce Institute; and a FET-103 Monofilament line for RHEON LABS of London to help develop a hyper viscoelastic fibre from RHEON™ which displays high strain-rate sensitive properties. The latter two of these examples were aided by significant UK grants to develop advanced materials.

FET is now looking forward to 2023 with a record order book. The company’s newly opened Fibre Development Centre features over £1.5 million investment in customer laboratory systems that will further enable fibre trials and product R&D. Three new polymer types were developed with clients in 2022 and several more are lined up in 2023, which is expected to bring the total of different polymer types to more than 40 in multifilament, monofilament and nonwoven formats.

FET will be exhibiting at two major exhibitions in 2023; INDEX 23, a leading Nonwovens show at Geneva in April; and ITMA, Milan, an international textile and garment technology exhibition in June.

Source:

FET Ltd

13.01.2023

Source Fashion: New international fashion sourcing platform in UK

The international fashion sourcing platform Source Fashion, taking place from 12th – 14th February at Olympia London, has announced a compelling line-up of country pavilions and over 150 audited, quality manufacturers from around the world including Peru, India, China, Pakistan, Italy, Spain, Greece, North Macedonia,  the UAE, Madagascar, Jordan, Uzbekistan, Turkey, the UK and many more who will join the inaugural show, which runs parallel to Pure London.

Bringing a textile pavilion to the UK for the first time, the Peru Pavilion will showcase six manufacturers specialising in high-quality alpaca wool from the raw material right through to garment production, as well as cotton and other natural mixtures.

The international fashion sourcing platform Source Fashion, taking place from 12th – 14th February at Olympia London, has announced a compelling line-up of country pavilions and over 150 audited, quality manufacturers from around the world including Peru, India, China, Pakistan, Italy, Spain, Greece, North Macedonia,  the UAE, Madagascar, Jordan, Uzbekistan, Turkey, the UK and many more who will join the inaugural show, which runs parallel to Pure London.

Bringing a textile pavilion to the UK for the first time, the Peru Pavilion will showcase six manufacturers specialising in high-quality alpaca wool from the raw material right through to garment production, as well as cotton and other natural mixtures.

The main Indian Pavilion at this year’s Source Fashion, in collaboration with the Wool and Woollens Export Promotion Council, will showcase 20 established garment and textile exporters specialising in wool, woollen and acrylic fibres. The exhibitors will be showing full garments including men’s, women’s and kidswear as well as a selection of fabrics and raw materials. These exhibitors are regular export partners to the UK retail industry and already work with some big retailers in white label production.

The China Pavilion will present a selection of high-quality Chinese manufacturers ranging from full garment manufacturing through to raw materials, fabrics, cashmere and components.

Other producers and manufacturers attending Source Fashion from across Europe and the UK include:

  • Mivania - an Italian knitwear manufacturer producing garments in 100% cashmere and cashmere blends.
  • SATCoL (Salvation Army Trading Company) - a charity-owned textiles collector in the UK, actively working with retailers to reduce their carbon footprints.
  • Kusilas - a Spanish company monitoring all the stages of the production process.
  • Prime Casual - based in Leicester, UK, they specialise in the design and manufacture of ladies clothing from fast fashion, wholesale to bespoke tailoring.
  • Athos Pallas - a fashion and textile agency located in Thessaloniki, Greece.

 

Source:

Source Fashion by Hyve / Good Results PR

(c) adidas AG
SS23 Melbourne Tennis Collection - Felix Auger Aliassime
13.01.2023

adidas introduces the new SS23 Melbourne Tennis Collection

  • adidas unveils its SS23 Melbourne Tennis Collection – an apparel range fit for performance
  • Inspired by plants and florals, the collection features bold prints, vibrant colorways and a moiré effect textile
  • The adidas SS23 Melbourne Tennis Collection will be available from Jan 13 2023

adidas launches its new SS23 Melbourne Tennis Collection, a range of performance apparel featuring striking colorful prints, inspired by plant life and nature. Select pieces feature a contrast-color mesh layering that when in motion creates a moiré effect and helps to mask the player’s movements and positioning on court.

With the help of innovation, adidas is seeing possibilities in turning towards new resources. For these products adidas turned to a greenhouse gas technology. It uses captured industrial emissions as a new material feedstock. CO2 is fermented into ethanol which constitutes 30% by weight of a polyester yarn. adidas knitted this yarn into various products and now this carbon-based ethanol makes up a minimum of 15% by weight of these garments.

  • adidas unveils its SS23 Melbourne Tennis Collection – an apparel range fit for performance
  • Inspired by plants and florals, the collection features bold prints, vibrant colorways and a moiré effect textile
  • The adidas SS23 Melbourne Tennis Collection will be available from Jan 13 2023

adidas launches its new SS23 Melbourne Tennis Collection, a range of performance apparel featuring striking colorful prints, inspired by plant life and nature. Select pieces feature a contrast-color mesh layering that when in motion creates a moiré effect and helps to mask the player’s movements and positioning on court.

With the help of innovation, adidas is seeing possibilities in turning towards new resources. For these products adidas turned to a greenhouse gas technology. It uses captured industrial emissions as a new material feedstock. CO2 is fermented into ethanol which constitutes 30% by weight of a polyester yarn. adidas knitted this yarn into various products and now this carbon-based ethanol makes up a minimum of 15% by weight of these garments.

In addition, the collection also utilizes HEAT.RDY and Aeroready technologies. HEAT.RDY technology is designed to maximize airflow and optimize sweat distribution, while AEROREADY is powered by moisture-wicking fabric that absorbs sweat quickly for a dry feeling, helping players to move freely and comfortably on court.

The SS23 Melbourne Tennis Collection will be premiered on court by adidas athletes, including Stefanos Tsitsipas, Felix Auger Aliassime, Garbiñe Muguruza, Qiang Wang and Maria Sakkari.

The SS23 Melbourne Tennis Collection will be available from Jan 13.

More information:
adidas Sportswear polyester yarns
Source:

adidas AG

Photo: Carbios
13.01.2023

Carbios and Novozymes deepen collaboration in biorecycling of PET

Carbios and Novozymes announced an exclusive long-term global strategic partnership. This major agreement ensures the long-term production and supply of Carbios’ proprietary PET-degrading enzymes at an industrial scale for the world’s first biological PET-recycling plant due to start production in 2025 in Longlaville (France), as well as Carbios’ future licensee customers.
 
Carbios and Novozymes have had a partnership since 2019 to develop enzyme-based solutions and address  the sustainability challenge of plastic pollution, both within PET-recycling[1] and PLA-biodegradation[2].  Building on the current Joint Development Agreement (JDA), under the new agreement, Carbios and Novozymes will extend their collaboration to develop, optimize and produce enzymes that will subsequently be supplied by Novozymes to all licensees of Carbios’ technology.  The new agreement grants both parties exclusivity in the field of the partnership.
 

Carbios and Novozymes announced an exclusive long-term global strategic partnership. This major agreement ensures the long-term production and supply of Carbios’ proprietary PET-degrading enzymes at an industrial scale for the world’s first biological PET-recycling plant due to start production in 2025 in Longlaville (France), as well as Carbios’ future licensee customers.
 
Carbios and Novozymes have had a partnership since 2019 to develop enzyme-based solutions and address  the sustainability challenge of plastic pollution, both within PET-recycling[1] and PLA-biodegradation[2].  Building on the current Joint Development Agreement (JDA), under the new agreement, Carbios and Novozymes will extend their collaboration to develop, optimize and produce enzymes that will subsequently be supplied by Novozymes to all licensees of Carbios’ technology.  The new agreement grants both parties exclusivity in the field of the partnership.
 
The strategic partnership supports the large-scale industrial deployment of Carbios’ patented PET-recycling technology starting with Carbios’ future industrial reference unit in Longlaville (France), which will be the world’s first biological PET-recycling plant. Construction will begin later this year, and both building and operating permits having been filed with local authorities.  Production at the plant is set to start in 2025 and the processing capacity will be 50,000 tonnes of waste per year.

Source:

Carbios

Graphik Freudenberg Performance Materials
10.01.2023

Freudenberg: Technical packaging textiles with less CO2 emissions

By using a high share of recycled content in its Evolon® materials, Freudenberg Performance Materials (Freudenberg) offers technical packaging textiles with a carbon footprint decreased by 35%. An independent LCA study showed additional benefits such as energy resource savings and lower water use. Furthermore, Evolon® fabrics provide sustainability benefits over the packaging entire life cycle thanks to high end performance and durability.

By replacing virgin PET with recycled PET, the cradle-to-gate carbon footprint of Evolon® packaging textile materials decreased by 35%. This is the result of a study by an independent LCA and eco-design consultancy firm, which made a Cradle-to-Gate assessment of several Evolon® products using virgin PET or recycled PET. The study was finalized in 2022 and conducted according to the principles of ISO 14040/ ISO 14044 standards, following the recommendations of the Product Environmental Footprint and the Circular Footprint Formula.

By using a high share of recycled content in its Evolon® materials, Freudenberg Performance Materials (Freudenberg) offers technical packaging textiles with a carbon footprint decreased by 35%. An independent LCA study showed additional benefits such as energy resource savings and lower water use. Furthermore, Evolon® fabrics provide sustainability benefits over the packaging entire life cycle thanks to high end performance and durability.

By replacing virgin PET with recycled PET, the cradle-to-gate carbon footprint of Evolon® packaging textile materials decreased by 35%. This is the result of a study by an independent LCA and eco-design consultancy firm, which made a Cradle-to-Gate assessment of several Evolon® products using virgin PET or recycled PET. The study was finalized in 2022 and conducted according to the principles of ISO 14040/ ISO 14044 standards, following the recommendations of the Product Environmental Footprint and the Circular Footprint Formula.

Evolon® microfilament textiles have a small carbon footprint because their manufacturing process uses low CO2 energy sources. The fabrics are lightweight and can be reused throughout entire production programs, e.g. of a car model when it is about the automotive industry. Furthermore, the new Evolon® RE fabrics contain up to 85% of recycled PET which is produced in-house out of post-consumer PET bottles.

Evolon® textiles are suitable for reusable technical packaging, which eliminate the use of thousands of disposable packaging materials. Evolon® fabrics offer scratch-free, lint-free, high-end surface protection for molded plastic parts, painted parts and other sensitive industrial and automotive parts during transport. This contributes to lower the scrap rate of parts and provide both financial and ecological benefits. By using Evolon® reusable packaging to transport highly-sensitive parts, customers can increase their efficiency and save resources.

Source:

Freudenberg Performance Materials

09.01.2023

Shelton Vision AI: Tailored machine learning solutions for the textiles industry

Over the past three years, a dedicated AI development team at BTMA member Shelton Vision has been developing tailored machine learning solutions for the textiles industry.

The aim has been to elevate the detection process and the accuracy of naming and grading subtle defects in textiles, in real time within production environments.

“Big Data ‘off-the-shelf’ systems such as those behind technolgies like facial recognition and Google Maps involve reading many thousands of single images each second and simply take too long to accumulate sufficient data for what’s required in this specific case,” says Shelton Vision CEO and Managing Director Mark Shelton. “A feature of the textile industry is that in many sectors, the product range changes several times within a year and it is not uncommon to have to inspect hundreds, if not thousands of different styles in a year based on precise settings.”

In terms of defect types, he adds, there may typically be over 100 that need to be accurately detected, classified (named) and graded in real time.

Over the past three years, a dedicated AI development team at BTMA member Shelton Vision has been developing tailored machine learning solutions for the textiles industry.

The aim has been to elevate the detection process and the accuracy of naming and grading subtle defects in textiles, in real time within production environments.

“Big Data ‘off-the-shelf’ systems such as those behind technolgies like facial recognition and Google Maps involve reading many thousands of single images each second and simply take too long to accumulate sufficient data for what’s required in this specific case,” says Shelton Vision CEO and Managing Director Mark Shelton. “A feature of the textile industry is that in many sectors, the product range changes several times within a year and it is not uncommon to have to inspect hundreds, if not thousands of different styles in a year based on precise settings.”

In terms of defect types, he adds, there may typically be over 100 that need to be accurately detected, classified (named) and graded in real time.

“Added to this is the need to ‘filter out’ the random occurrence of ‘non defects’, such as loose threads, lint and dust on the surface – the number of which can be higher than actual defects – and it is clear that a bespoke system is required.”
The development team has consequently established metadata for identifying defect properties, enabling the successful identification of faults from a much smaller number of images.

“The system employs a unique combination of machine learning for automated style training and novel algorithms for defect detection, to provide high quality images for the AI real time defect classification and grading software,” Shelton explains. “Due to the inherent variation in fabric features – raw materials, construction, texture, colour and finishes, as well as the differing product quality standards in value chains and the regional variations in what defects are called – our AI engine uses models built for each individual company or group of companies, or product value chain.”

The AI models are constructed so that the user operatives can populate them with their own data produced by the vision system or by obtaining defect images from another imaging source (eg a mobile phone camera).  

The occurrence of defects is sporadic and many defect types occur infrequently, although when they do, they can have severe consequences. These scenarios re-enforce the need for the AI engine to be quickly set up and able to operate accurately with limited data sets of typically between 30 and 50 good quality images per defect type.

A further feature is a tool enabling the user to periodically ‘clean up’ the AI data during the set up phase. This is used to resolve conflicting data and to correct mis-named images.

Generally, the highest cost component of fabric production is the raw material and in addition to finished product inspection, a cost effective use for vision systems is in process operation.

Generally, the highest cost component of fabric production is the raw material and in addition to finished product inspection, a cost effective use for vision systems is in process operation.

“There is a need for the real time detection of defects that are being created in separate processes, such as printing or coating and for real time automated systems that can accurately determine the defects and their severity and provide a reliable signal for an operative to rectify the issue, This can result in considerable savings.

Prior to Shelton introducing powerful customised machine vision and real time defect classification, the only systems available were those that required manual sifting through vast numbers of images, which included both real defects and ‘non defect’ images. The task was very often overwhelming and did not provide much benefit beyond manual fabric inspection.

More information:
Shelton Vision fabric inspection
Source:

AWOL for British Textile Machinery Association (BTMA)

09.01.2023

Autoneum takes over automotive business of Borgers Group

January, 6 Autoneum signed an agreement to acquire the automotive business of Borgers. The transaction is expected to close in April 2023 following antitrust clearance. The enterprise value paid amounts to EUR 117 million.

Borgers specializes in textile acoustics protection, insulation and trim for automobiles. The product and customer range of Borgers is to a great extent complementary to the product and customer portfolio of Autoneum. Borgers’ wheel arch liner and trunk liner product lines as well as their truck business optimally complement the product range of Autoneum. Especially in the field of textile wheel arch liners, Borgers is the market leader in Europe. In addition, Borgers’ product range is distinguished by sustainable and fully recyclable products. In fiscal year 2021, the Borgers Automo-tive Group generated revenue of EUR 610 million with around 4 700 employees. Thanks to Autoneum’s global presence, the Borgers product portfolio adds to the sales potential for profitable growth in the medium term outside Europe.

January, 6 Autoneum signed an agreement to acquire the automotive business of Borgers. The transaction is expected to close in April 2023 following antitrust clearance. The enterprise value paid amounts to EUR 117 million.

Borgers specializes in textile acoustics protection, insulation and trim for automobiles. The product and customer range of Borgers is to a great extent complementary to the product and customer portfolio of Autoneum. Borgers’ wheel arch liner and trunk liner product lines as well as their truck business optimally complement the product range of Autoneum. Especially in the field of textile wheel arch liners, Borgers is the market leader in Europe. In addition, Borgers’ product range is distinguished by sustainable and fully recyclable products. In fiscal year 2021, the Borgers Automo-tive Group generated revenue of EUR 610 million with around 4 700 employees. Thanks to Autoneum’s global presence, the Borgers product portfolio adds to the sales potential for profitable growth in the medium term outside Europe.

Autoneum is acquiring Borgers from insolvency and has agreed new pricing and delivery terms with its customers. These will ensure sustained profitability and the further development of product and process technologies in both the short and long term.

The transaction will initially be financed through a new credit facility which is available in addition to the syndicated loan of CHF 350 million renewed in October 2022. A capital increase in the amount of approximately CHF 100 million is planned for the long-term refinancing of the acquisition. Autoneum’s two largest shareholders, Artemis Beteiligungen I AG and PCS Holding AG, have agreed to participate in the capital increase in proportion to their current shareholdings. Even taking into account the aforementioned capital increase, the transaction will generate a positive earn-ings per share contribution from the outset.

Source:

Autoneum Management AG

(c) Fraunhofer ICT
06.01.2023

Fraunhofer CPM develop programmable material for ergonomic lying position

Many people across the world are bedridden – be it due to illness, an accident or old age. Because those affected often cannot move or turn over by themselves, they often end up with very painful bedsores. In the future, it should be possible to avoid bedsores with the help of materials that can be programmed to entirely adapt their form and mechanical properties. For example, the body support of mattresses made from programmable materials can be adjusted in any given area at the push of a button. Furthermore, the support layer is formed in such a way that strong pressure on one point can be distributed across a wider area. Areas of the bed where pressure is placed are automatically made softer and more elastic. Caregivers can also adjust the ergonomic lying position to best fit their patient.

Many people across the world are bedridden – be it due to illness, an accident or old age. Because those affected often cannot move or turn over by themselves, they often end up with very painful bedsores. In the future, it should be possible to avoid bedsores with the help of materials that can be programmed to entirely adapt their form and mechanical properties. For example, the body support of mattresses made from programmable materials can be adjusted in any given area at the push of a button. Furthermore, the support layer is formed in such a way that strong pressure on one point can be distributed across a wider area. Areas of the bed where pressure is placed are automatically made softer and more elastic. Caregivers can also adjust the ergonomic lying position to best fit their patient.

Materials and microstructuring
Materials for applications requiring specific changes to stiffness or shape are being developed by researchers from Fraunhofer CPM, which is formed of six core institutes with the aim of designing and producing programmable materials. So, how can we program materials? “Essentially, there are two key areas where adjustments can be made: the base material – thermoplastic polymers in the case of mattresses and metallic alloys for other applications, including shape memory alloys – and, more specifically, the microstructure,” explains Dr. Heiko Andrä, spokesperson on the topic at the Fraunhofer Institute for Industrial Mathematics ITWM, one of the Fraunhofer CPM core institutes. “The microstructure of these metamaterials is made up of unit cells that consist of structural elements such as small beams and thin shells.” While the size of each unit cell and its structural elements in conventional cellular materials, like foams, vary randomly, the cells in the programmable materials are also variable – but can be precisely defined, i.e., programmed. This programming can be made, for example, in such a way that pressure on a particular position will result in specific changes at other regions of the mattress, i.e., increase the size of the contact surface and provide optimal support to certain areas of the body.

Materials can also react to temperature or humidity
The change in shape that the material should exhibit and the stimuli to which it reacts - mechanical stress, heat, moisture or even an electric or magnetic field - can be determined by the choice of material and its microstructure.

The journey to application
A single piece of material can take the place of entire systems of sensors, regulators and actuators. The goal of Fraunhofer CPM is to reduce the complexity of systems by integrating their functionalities into the material and reducing material diversity. We always have industrial products in mind when developing the programmable materials. As such, we take mass production processes and material fatigue into account, among other things,” says Franziska Wenz, deputy spokesperson on the topic at the Fraunhofer Institute for Mechanics of Materials IWM, another core institute of Fraunhofer CPM. The initial pilot projects with industry partners are also already underway. The research team expects that initially, programmable materials will act as replacements for components in existing systems or be used in special applications such as medical mattresses, comfortable chairs, variable damping shoe soles and protective clothing. “Gradually, the proportion of programmable materials used will increase,” says Andrä. Ultimately, they can be used everywhere – from medicine and sporting goods to soft robotics and even space research.

Source:

Fraunhofer ITWM

Zyler
05.01.2023

Zyler: Virtual try-on in fashion stores

  • Digital display experience platform, Raydiant, partners with Zyler to offer virtual try-on to fashion retailers in-store.

Digital display experience platform, Raydiant, is now offering an exciting new virtual try-on solution to their fashion retail customers. Virtual try-on is brought to stores by Zyler, fashion technology that allows customers to see themselves in any outfit without having to physically try them on.

This means that retail spaces can be transformed, maximizing space and making use of the latest innovations in fashion. When customers see themselves in items before purchase, they are more excited about the products, their confidence is boosted, and the brand becomes more inclusive. Customers shop and buy more, and are less likely to return the products they purchase. Raydiant presents this new virtual try-on offering in combination with their digital signage solutions.

  • Digital display experience platform, Raydiant, partners with Zyler to offer virtual try-on to fashion retailers in-store.

Digital display experience platform, Raydiant, is now offering an exciting new virtual try-on solution to their fashion retail customers. Virtual try-on is brought to stores by Zyler, fashion technology that allows customers to see themselves in any outfit without having to physically try them on.

This means that retail spaces can be transformed, maximizing space and making use of the latest innovations in fashion. When customers see themselves in items before purchase, they are more excited about the products, their confidence is boosted, and the brand becomes more inclusive. Customers shop and buy more, and are less likely to return the products they purchase. Raydiant presents this new virtual try-on offering in combination with their digital signage solutions.

Source:

Anthropics Technology

(c) Haelixa
05.01.2023

Damteks and Haelixa collaborate: Tracing recycled acrylic fiber

Haelixa, the Swiss traceability company and Damteks Textiles have announced a collaboration to mark and trace recycled acrylic fiber. Damteks is offering their recycled yarn to customers whereby they are able to place an order with the unique Haelixa DNA already attached.

The Haelixa solution is DNA markers which are solved in liquid and applied to fibers as a fine spray. Spot checks are completed after spraying to determine the presence of DNA and identify the product. The test is based on PCR technology that is 100% reliable and has forensic validity.

Damteks saw an increase in demand for blended yarn in the last year. The request is most often a composition of 30% recycled fiber with 70% standard fiber. Brands are looking for options to be more sustainable and Damteks proactively sought out an answer. They are offering the yarn with Haelixa DNA to validate the recycled acrylic in the mix.

Haelixa, the Swiss traceability company and Damteks Textiles have announced a collaboration to mark and trace recycled acrylic fiber. Damteks is offering their recycled yarn to customers whereby they are able to place an order with the unique Haelixa DNA already attached.

The Haelixa solution is DNA markers which are solved in liquid and applied to fibers as a fine spray. Spot checks are completed after spraying to determine the presence of DNA and identify the product. The test is based on PCR technology that is 100% reliable and has forensic validity.

Damteks saw an increase in demand for blended yarn in the last year. The request is most often a composition of 30% recycled fiber with 70% standard fiber. Brands are looking for options to be more sustainable and Damteks proactively sought out an answer. They are offering the yarn with Haelixa DNA to validate the recycled acrylic in the mix.

The haelixa team visited the Damteks recycling facility in Istanbul to kick off the partnership that will continue throughout 2023. The traceability program has the DNA sprayed on the recycled fibers before spinning. The project also saw the use of a tailored Haelixa liquid sprayer designed by the team based in Switzerland. When manufacturers do not have built-in moisturizing systems, Haelixa provides them with a custom unit to shower the DNA liquid onto the fibers. This sprayer is engineered to match the mechanical processing of the customer.

Damteks is a family-owned business that pride itself in carefully selecting environmentally responsible options for its production processes. On top of the certifications they have obtained including - GRS, RCS, GOTS, OCS - Damteks decided to have their products "Marked and Traced by Haelixa" to add additional credibility and reliability. Damteks plans to offer marked and traced by Haelixa yarn in different dyes as their offering to brands.

More information:
DNA marker acrylic fiber
Source:

Haelixa

Photo Pure Denim
03.01.2023

PureDenim & Bemberg ™: “Blue di Cupro” collection at Pitti Uomo

In occasion of the next edition of Pitti Uomo, Bemberg™ by Asahi Kasei – the unique fiber with a circular economy footprint obtained from cotton linters through a closed-loop process ensuring certified sustainability credentials through its transparent and traceable approach- reveals a very special Bemberg™ fabrics smart range dedicated to premium denimwear.

In occasion of the next edition of Pitti Uomo, Bemberg™ by Asahi Kasei – the unique fiber with a circular economy footprint obtained from cotton linters through a closed-loop process ensuring certified sustainability credentials through its transparent and traceable approach- reveals a very special Bemberg™ fabrics smart range dedicated to premium denimwear.

This has been made possible thanks to the partnership with PureDenim, a leading Italian company whose strategy since 10 years is based on an entire re-design of the production system, inspired by circular economy principles that combines technology and innovative materials in order to offer the highest levels of design, innovation and real responsible values derived from an holistic approach to sustainability.
The “Blue di Cupro” collection is made with seven fabrics made with Bemberg™, either 100% Bemberg™ or in blend with cotton, wool, and it applies the most advanced Pure Denim Technologies. The Blue di cupro fabrics made with Bemberg™ will also be dyed with “Smart Indigo” an indigo dye technology internally produced by PureDenim, through a chemical-free production. The only elements involved are: water, indigo pigments, and electricity. In terms of finishing, fabrics’ looks and performances are enhanced by the “Eco Sonic” ultrasounds finishing technology which brings significant reduction of water used, increased aesthetic features and controlled discoloration. And last but not least every yarn used at PureDenim is protected by NaturalReco® a 100% natural product that completely SUBSTITUTE the use of plastic films that are one of the key causes of microplastic emission for denim application.

“Blue” seems to be the new colour of Bemberg™, in fact, the company in early November 2022 announced, at the Blue Friday initiative by UNESCO's Intergovernmental Oceanographic Commission (IOC), the achievement of the OK biodegradable MARINE certification, which guarantees the biodegradability of its products even in the marine environment, as certified by TÜV AUSTRIA, meaning a lot in the context of microplastics in water issue solutions. This Bemberg™ certification’s achievement comes on top of other key ones such as the INNOVHUB report that confirms Bemberg™ biodegradability in soil without releasing hazardous substances, the RCS by Textile Exchange, and the Oeko-Tex Standard 100 and ISO 14001 corporate certifications.

Source:

C.L.A.S.S.

30.12.2022

Renewcell starts deliveries of Circulose® pulp from Renewcell 1

December 29, Renewcell dispatched the first shipment of Circulose® dissolving pulp produced at its Renewcell 1 plant in Sundsvall to a customer. This sale is the latest step in the ramp-up of Renewcell 1 to its initial capacity of 60,000 tonnes per year.

Founded by innovators from Stockholm’s KTH Royal Institute of Technology in 2012, Re:NewCell AB (publ) (‘Renewcell’) is a multi-award-winning sustaintech company based in Sweden. The company’s vision is to make fashion circular. Through its patented process, Renewcell is able to recycle cellulosic textile waste, such as worn-out cotton clothes and production scraps, transforming it into a pristine new material called Circulose®.

December 29, Renewcell dispatched the first shipment of Circulose® dissolving pulp produced at its Renewcell 1 plant in Sundsvall to a customer. This sale is the latest step in the ramp-up of Renewcell 1 to its initial capacity of 60,000 tonnes per year.

Founded by innovators from Stockholm’s KTH Royal Institute of Technology in 2012, Re:NewCell AB (publ) (‘Renewcell’) is a multi-award-winning sustaintech company based in Sweden. The company’s vision is to make fashion circular. Through its patented process, Renewcell is able to recycle cellulosic textile waste, such as worn-out cotton clothes and production scraps, transforming it into a pristine new material called Circulose®.

Source:

Renewcell

(c) EFI GmbH
30.12.2022

EFI Reggiani with textile printing solutions at India ITME 2022

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

Textile companies could take full advantage of expanded print opportunities with EFI™ Reggiani textile solutions presented at the 8-13 December India ITME Exhibition in Greater Noida.

The EFI Reggiani TERRA Silver printer was shown at ITME 2022: a solution to enter the industrial printing segment with a short, smart and green process. The EFI Reggiani TERRA Solution eliminates the need for steaming or washing on direct-to-textile applications, using a greener, more efficient polymerisation process that takes place as the printed textile goes through the printer’s on-board dryer. As a result, users can achieve superior printing results while using less time, water, and energy.

The EFI Reggiani exhibit at ITME was also promoting:

  •  EFI Reggiani HYPER printer, a scanning printer available in 1.8-metre, 2.4-metre or 3.4-metre widths that prints at up to 20 linear metres per minute peak speed, making it the fastest textile scanning printer on the market;
  • Mezzera Concord, the continuous rope washing line from the specialist in washing solutions that transports fabric by overflow for tensionless running with an independent squeezing mangle for each channel;
  • One of the industry’s broadest line-ups of high-end, superior-quality textile inks, including EFI Reggiani AQUA and EFI Reggiani Diamond reactive, IRIS dye-sublimation, ARIA direct disperse, FUOCO acid, and GEA and TERRA pigment inks; and
  • Inèdit, recently acquired by EFI Reggiani, a developer of raster image processors (RIPs) and related software for digital industrial textile printing with their product portfolio that features proven, highly advanced workflow solutions for textile profiling, calibration, design integration and much more.
Source:

EFI GmbH

(c) Avgol by Indorama Ventures Limited
30.12.2022

Avgol® wins Procter & Gamble Supplier Excellence Award

Avgol®, an Indorama Ventures Limited company, has been honoured with the Supplier Excellence Award by leading global brand Procter & Gamble.

The award was in recognition of Avgol, a leader in the manufacture of high-performance nonwoven fabric solutions, ‘being a notable and valuable supplier over the last fiscal year’ to the P&G Baby Care Business Unit.

Avgol CEO Tommi Bjornman said receiving the honour from P&G for the first time is a source of great pride for the company. “The assessment process for the award focuses on us as the supplier showing outstanding contributions across a range of key categories,” he said. “I am delighted and proud that the Avgol team was unanimously identified as being strongest in terms of our collaboration with the customer, as well as in our continuous improvement efforts across all regions of P&G’s global Baby Care program.

“It was heartening that, in making the award, P&G further noted that Avgol’s efforts have significantly assisted in their own commercial growth during a challenging period for the Hygiene market,” he said.

Avgol®, an Indorama Ventures Limited company, has been honoured with the Supplier Excellence Award by leading global brand Procter & Gamble.

The award was in recognition of Avgol, a leader in the manufacture of high-performance nonwoven fabric solutions, ‘being a notable and valuable supplier over the last fiscal year’ to the P&G Baby Care Business Unit.

Avgol CEO Tommi Bjornman said receiving the honour from P&G for the first time is a source of great pride for the company. “The assessment process for the award focuses on us as the supplier showing outstanding contributions across a range of key categories,” he said. “I am delighted and proud that the Avgol team was unanimously identified as being strongest in terms of our collaboration with the customer, as well as in our continuous improvement efforts across all regions of P&G’s global Baby Care program.

“It was heartening that, in making the award, P&G further noted that Avgol’s efforts have significantly assisted in their own commercial growth during a challenging period for the Hygiene market,” he said.

In 2018, Indorama Ventures Limited (IVL), a leading petrochemicals producer and global integrated leader in PET and fibres, acquired majority ownership of Avgol, resulting in a focused and faster growth of Avgol Nonwovens.

“With the combined financial, technical, commercial strength and expertise of Avgol and IVL, Avgol has been working hard to develop innovative products, putting sustainability front and centre in our plans for the future and ensuring we deliver the very best product and service to our customers around the world,” said Tommi Bjornman.

 

Source:

Avgol by Indorama Ventures Limited / PHD Marketing Ltd

30.12.2022

Carbios hosts PET Biorecycling Summit

  • Scientific researchers from 10 countries, including North America, UK, Japan and Germany
  • Bertrand Piccard, Solar Impulse Foundation, as Keynote Speaker
  • Speakers from strategic partnerships: L’Oréal, Salomon, and McKinsey

Carbios hosted the first PET Biorecycling Summit from 7 to 8 December 2022 in Paris. The event attracted over 100 international participants from the scientific, academic, and industrial worlds to exchange on the advances in the field of biological recycling, and how to bring these innovations for a circular economy to market.

  • Scientific researchers from 10 countries, including North America, UK, Japan and Germany
  • Bertrand Piccard, Solar Impulse Foundation, as Keynote Speaker
  • Speakers from strategic partnerships: L’Oréal, Salomon, and McKinsey

Carbios hosted the first PET Biorecycling Summit from 7 to 8 December 2022 in Paris. The event attracted over 100 international participants from the scientific, academic, and industrial worlds to exchange on the advances in the field of biological recycling, and how to bring these innovations for a circular economy to market.

The two-day conference gathered scientists from various academic institutions to share their latest research on PET enzymatic depolymerization.  Bertrand Piccard, Initiator and Chairman of the Solar Impulse Foundation[1], joined as the Keynote Speaker for the last session focused on PET circularity, and praised Carbios’ contribution to reducing plastic pollution. The Summit concluded with a visit of Carbios’ demonstration plant in Clermont-Ferrand. The demonstration plant was inaugurated in September 2021 and brings Carbios’ technology one step closer to industrialization. Following the demonstration plant’s success, Carbios is on track to build and operate the world’s first industrial-scale enzymatic PET recycling plant (with a processing capacity of 50.000 tons of PET waste per year) in France (Longlaville) by 2025[2], and to start licensing its technology throughout the world.


[1] To address sustainability challenges while enabling economic growth, Bertrand Piccard and the Solar Impulse Foundation have identified 1000+ clean and profitable solutions. More details available on the official website.

[2] Cf. Press release dated 23 February 2022.

Source:

Carbios