From the Sector

Reset
29 results
drop of orders (c) ACIMIT
26.07.2023

Italian Textile Machinery: 2nd Q 2023 Drop in Order Intake

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

ACIMIT president Marco Salvadè stated that, “The orders index for the second quarter elaborated by our Economics Department clearly shows a decline in new orders both in Italy and abroad compared to the previous year. The decline that usually precedes an event such as ITMA, the international textile machinery exhibition held last June in Milan, however, is part of a negative trend that has been going on for several quarters”.

Uncertainty appears to be weighing heavily especially on markets abroad, where foreign trade statistics updated to the first quarter of 2023 are marked by a slackening in Italian sales in some important reference markets, such as Turkey, China, the United States and Pakistan.

Salvadè added that, “Feedback from over 400 Italian companies that took part in ITMA is positive. It’s now necessary for the many contacts made during the event to materialize and for the demand for machinery in the main textile machinery markets to resume a path towards growth.”

More information:
ACIMIT orders index
Source:

ACIMIT

24.07.2023

Rieter in first Half of 2023: Increase in sales, decrease in orders

In the first half of 2023, Rieter recorded a significant increase in sales of 22.2% to CHF 758.2 million, despite some cancellations or postponements of deliveries as a result of the earthquake in Türkiye. Cyclical market downturns in the individual market segments, which were already apparent in the second half of 2022, led to an order intake of CHF 325.0 million (-62.6%) in the reporting period, lower than in the corresponding period of the previous year.

Order intake in almost all regions was characterized by the reluctance to invest in new machines. Only in China did order intake increase due to investments by spinning mills in improving their local competitiveness. In addition, some customers held back pending investment decisions and waited for the innovations presented at ITMA in Milan in June 2023. At the same time, demand for consumables, wear & tear and spare parts declined due to the global market downturn.

In the first half of 2023, Rieter recorded a significant increase in sales of 22.2% to CHF 758.2 million, despite some cancellations or postponements of deliveries as a result of the earthquake in Türkiye. Cyclical market downturns in the individual market segments, which were already apparent in the second half of 2022, led to an order intake of CHF 325.0 million (-62.6%) in the reporting period, lower than in the corresponding period of the previous year.

Order intake in almost all regions was characterized by the reluctance to invest in new machines. Only in China did order intake increase due to investments by spinning mills in improving their local competitiveness. In addition, some customers held back pending investment decisions and waited for the innovations presented at ITMA in Milan in June 2023. At the same time, demand for consumables, wear & tear and spare parts declined due to the global market downturn.

On June 30, 2023, the company had a high order backlog of around CHF 1 100 million (June 30, 2022: around CHF 2 100 million). This therefore extends into the year 2024. As in the previous year, cancellations in the reporting period were around 5% of the order backlog, also impacted by the effects of the severe earthquake in Türkiye.

In the first half of 2023, Rieter posted a profit of CHF 25.2 million at the EBIT level, with an EBIT margin of 3.3% (first half of 2022: loss of CHF -10.2 million) and a net profit of CHF 13.3 million (first half of 2022: loss of CHF -25.2 million).

“Next Level” performance program planned
The challenging market situation over the past two years was marked by severe disruptions in the global supply chain in conjunction with rising material, energy, labor, and production costs. The current global demand for textile products remains at a low level. To increase long-term value for customers, employees, and shareholders, Rieter, as technology leader, is planning a performance program called “Next Level”. The goal of the program is to strengthen sales excellence, sharpen customer focus, improve cost efficiency in production and optimize fixed cost structures. The one-time cost of the program is anticipated to be around CHF 45 to 50 million, which will have an impact on the second half of 2023. Most of the program initiatives will be implemented before the end of 2023 with a view to achieving an expected impact from as early as 2024. With these measures Rieter is aiming to reduce operating costs by some CHF 80 million per year.

The program includes provisions for the net reduction of around 300 positions throughout the Group in relation to overhead functions. The possibility of further market- and volume-related adjustments in the order of 400 to 600 positions cannot be excluded. At the end of June 2023, Rieter had a global workforce of 5 555 employees.

Outlook
Given the economic situation and the ongoing cyclical market weakness, Rieter continues to expect below-average demand for new equipment in the coming months. A revival is not expected until the fourth quarter of 2023 at the earliest. Rieter also believes that demand for consumables, wear & tear and spare parts will not recover until later in 2023.

For the full year 2023, Rieter expects an EBIT margin of around 5 to 7% (including positive special effects of less than 2%) and sales at the previous year’s level of around CHF 1.5 billion.

Source:

Rieter Management AG

Wedding Dress Design with Stratasys’ 3DFashion Technology (c) Stav Peretz
12.07.2023

Wedding Dress Design with Stratasys’ 3DFashion Technology

Ada Hefetz, an Israel-based wedding dress designer, has introduced a new attention-grabbing collection with intricate, showstopping elements produced using Stratasys’ advanced direct-to-textile 3D printing technology. Showcased recently at Milan Design Week, the three unique dresses are based on Hefetz’s Flower of Life theme and were produced using Stratasys’ 3DFashion™ technology as part of her latest series celebrating matrimonial union, the circle of life, and design.

Known for designing haute couture bridal dresses combining vintage style and classic modern chic, Ada Hefetz is renowned for constantly pushing the boundaries of design. This is her first completed project using 3D printing.

Ada Hefetz, an Israel-based wedding dress designer, has introduced a new attention-grabbing collection with intricate, showstopping elements produced using Stratasys’ advanced direct-to-textile 3D printing technology. Showcased recently at Milan Design Week, the three unique dresses are based on Hefetz’s Flower of Life theme and were produced using Stratasys’ 3DFashion™ technology as part of her latest series celebrating matrimonial union, the circle of life, and design.

Known for designing haute couture bridal dresses combining vintage style and classic modern chic, Ada Hefetz is renowned for constantly pushing the boundaries of design. This is her first completed project using 3D printing.

The wedding dresses feature complex geometrical shapes, depicting the ‘Flower of Life’, a sacred geometry dating back to ancient Egypt. The intricate pattern is composed of overlapping circles that intersect to form flowers, which Ada Hefetz has combined with her design of a lily to symbolize the union between two individuals and the circle of life. The inspiring design uses Stratasys’ translucent VeroVivid™ resin material with Stratasys’ J850™ TechStyle™ 3D printer, which can be printed in over 500,000 unique colors with varying levels of flexibility, simulating different textures and finishes.

Ada Hefetz’s Flower of Life-themed 3D printed wedding dresses are currently on display at Milan’s D-House Urban Laboratory, which is owned and managed by Dyloan, the leading Italian manufacturer serving the high-end fashion sector.

More information:
Stratasys 3D printing materials
Source:

Stratasys

(c) ACIMIT
22.05.2023

Italian Textile Machinery: Drop in orders for 2023 first quarter

The textile machinery orders index for the first quarter of 2023, as processed by the Economics Office of ACIMIT, the Association of Italian Textile Machinery Manufacturers, declined markedly compared to January-March 2022 (-35%). In absolute terms, the index stood at 84.8 points (basis: 2015=100).

This result is mainly due to a reduction in the orders intake recorded by manufacturers on foreign markets. Indeed, foreign orders dropped by 40%, whereas the domestic market showed a 14% increase. The absolute value of the index settled at 78.3 points abroad, while it measured in at 148.1 points in Italy. During this year’s first quarter, booked orders stood at 4.2 months of guaranteed production.

ACIMIT president Alessandro Zucchi stated that, “The order index for the first quarter confirm a trend of the past few quarters, where uncertainty still predominates in global markets, both in terms of a macroeconomic framework that is characterized by a penalizing inflationary trend and ongoing geopolitical tensions. This is a scenario that this does not facilitate investment plans for businesses.”

The textile machinery orders index for the first quarter of 2023, as processed by the Economics Office of ACIMIT, the Association of Italian Textile Machinery Manufacturers, declined markedly compared to January-March 2022 (-35%). In absolute terms, the index stood at 84.8 points (basis: 2015=100).

This result is mainly due to a reduction in the orders intake recorded by manufacturers on foreign markets. Indeed, foreign orders dropped by 40%, whereas the domestic market showed a 14% increase. The absolute value of the index settled at 78.3 points abroad, while it measured in at 148.1 points in Italy. During this year’s first quarter, booked orders stood at 4.2 months of guaranteed production.

ACIMIT president Alessandro Zucchi stated that, “The order index for the first quarter confirm a trend of the past few quarters, where uncertainty still predominates in global markets, both in terms of a macroeconomic framework that is characterized by a penalizing inflationary trend and ongoing geopolitical tensions. This is a scenario that this does not facilitate investment plans for businesses.”

However, this uncertainty does not appear to affect the sector’s operators, who are nonetheless permeated by a sense of optimism, as is also testified by the positive data drawn from a comparison with orders from the previous quarter (October-December 2022), for which total orders had been slightly on the rise at +3%. Indeed, the president of ACIMIT confirms that, “Manufacturers in our sector don’t lack for work, having filled up on orders last year and are now busy fulfilling them. The forecasts for 2023 remain positive”. Zucchi concluded, “I expect this confirmation of a healthy manufacturing sector to come from ITMA Milan, the world’s premier trade show dedicated to textile and clothing technologies, slated to open on June 8th at the Rho Fiera exhibition spaces. The exhibit will feature over 400 Italian manufacturers, taking up approximately 30% of the entire exhibition space. This figure is in itself a result that confirms the leadership role of Italy’s textile machinery manufacturers”.

(c) Freudenberg Performance Materials Holding GmbH
Judith Marquant from fashion school Esmod in Paris during the presentation of her winning design
17.05.2023

Freudenberg Performance Materials Apparel: Winners of "Fashioning Sustainability"

A total of 20 European fashion and design schools took part in the 2nd “Fashioning Sustainability” competition organized by Freudenberg Performance Materials together with Macpi and Bemberg™ by Asahi Kasei, two co-branding partners in the textile industry.

Freudenberg invited talented young designers to create and submit their ideas for sustainable clothing. The initiative aims to show that sustainability is a key factor in the fashion industry.

Two of the most innovative outfits from each school were selected for the final round and presented to an international jury at the “Bagni Misteriosi” event location in Milan in May. Fashion design experts and opinion leaders as well as journalists were invited to select the most sustainable designs in the categories of “Technology” and “Design”.

A total of 20 European fashion and design schools took part in the 2nd “Fashioning Sustainability” competition organized by Freudenberg Performance Materials together with Macpi and Bemberg™ by Asahi Kasei, two co-branding partners in the textile industry.

Freudenberg invited talented young designers to create and submit their ideas for sustainable clothing. The initiative aims to show that sustainability is a key factor in the fashion industry.

Two of the most innovative outfits from each school were selected for the final round and presented to an international jury at the “Bagni Misteriosi” event location in Milan in May. Fashion design experts and opinion leaders as well as journalists were invited to select the most sustainable designs in the categories of “Technology” and “Design”.

The winners
First place in the “Technology” category went to Judith Marquant while the second to Jagoda Sokolowska, both students of the fashion school Esmod in Paris. Ilaria De Martino, from the fashion institute Modartech, Italy, and Xiaodan Liao from Polimoda, Italy, were awarded first and second place in the “Design” category. The first-place winners received €2,000, while the second places won €1,000.

All participants benefited from the platform to network with leading players in the garment industry and learn more about concrete steps for embracing sustainability. Creating true sustainability in the fashion industry means reducing the material flow of clothing, addressing both sustainable production and consumption.

Members of the Jury:
Cristiano Zanetti, Sales Director Italy, Freudenberg Performance Materials
Maurizio Cazzin, Male Modeller, Maison Giorgio Armani
Riccardo Bullio, Apparel Industrial Division Director, Dolce & Gabbana
Caterina Cuoghi, Industrial Director, Area NYC
Simone Bigi, Style and Product Office Manager FAY line, Gruppo TOD’S
Roberto Cibin, Model and Pattern Development Manager, Caruso
Bruno Landi, Sales Director, Vitale Barberis Canonico
Luisella Allegretti, Pattern Designer Boss MW Business Specialist, Hugo Boss
Eugenio Balordi, Product Manager, Maison Margiela
Ettore Pellegrini, Sales and Marketing Manager, Asahi Kasei Fibers Italia

Source:

Freudenberg Performance Materials Holding GmbH

(c) Sadia Rafique
10.05.2023

Renewcell partners with TextileGenesis™ for Circulose® Pulp-to-Retail Transparency

After participating in industry trials, Renewcell and TextileGenesis™ have the intention to establish an agreement for full pulp-to-retail traceability for Renewcell’s CIRCULOSE® recycled raw material across the entire textile supply chain, announcing it at Challenge the Fabric (Milan, Italy).

Renewcell uses a patented process to breakdown and recycle cotton and other cellulosic textile waste, such as worn-out jeans and production scraps, to create CIRCULOSE®, a biodegradable raw material that can be used to create viscose, lyocell, modal, acetate and other man-made cellulosic fibers. These regenerated fibers are then spun into yarns, woven or knitted into fabrics before being cut and sewn into new high-quality textile products.
 
With TextileGenesis™, Renewcell will be able to share real-time digital traceability with its customers and supply chain partners.

After participating in industry trials, Renewcell and TextileGenesis™ have the intention to establish an agreement for full pulp-to-retail traceability for Renewcell’s CIRCULOSE® recycled raw material across the entire textile supply chain, announcing it at Challenge the Fabric (Milan, Italy).

Renewcell uses a patented process to breakdown and recycle cotton and other cellulosic textile waste, such as worn-out jeans and production scraps, to create CIRCULOSE®, a biodegradable raw material that can be used to create viscose, lyocell, modal, acetate and other man-made cellulosic fibers. These regenerated fibers are then spun into yarns, woven or knitted into fabrics before being cut and sewn into new high-quality textile products.
 
With TextileGenesis™, Renewcell will be able to share real-time digital traceability with its customers and supply chain partners.

  • The platform uses digital tokens to ensure a secure chain of custody for all supply chain processes from raw materials to retail.
  • The company’s “fiber-forwards” traceability captures real-time shipments; its Fibercoins™ digital tokens verify point of origin and eliminate “double counting” of sustainable materials.
  • Its AI (augmented intelligence) engine verifies transactions between supply chain partners.  

 
Furthermore, TextileGenesis™ is already partnering with fiber producers including Lenzing AG, Eastman, and Birla Cellulose.

Source:

Re:NewCell AB

(c) Fong’s Europe
THEN Airjetwin
03.05.2023

Fong’s Europe: THEN Airflow developments at ITMA 2023

At ITMA 2023 in Milan from June 8-14, Fong’s Europe will introduce its latest THEN Synergy Airflow and THEN Airjetwin machines, which exploit the principle to provide high-quality, efficient and eco-friendly dyeing processes for a variety of fabrics.

“THEN introduced its first machines with Airflow technology in 1980 and since then we have had wide experience of pretreating and dyeing with Airflow transport systems on all kind of fabrics,” says Fong’s Europe Director of Sales and Marketing Richard Fander. “Our team of engineers has collected data on dyeing processes, results and consumption figures for years and constantly makes use of this accumulated know-how to optimise the processes of our customers.

“The THEN team understands Airflow dyeing processes and technology based on it guarantees the lowest liquor ratio on round shape machines. The transport of fabric by air reduces the liquor ratio compared to every kind of hydraulically driven transport system.”

At ITMA 2023 in Milan from June 8-14, Fong’s Europe will introduce its latest THEN Synergy Airflow and THEN Airjetwin machines, which exploit the principle to provide high-quality, efficient and eco-friendly dyeing processes for a variety of fabrics.

“THEN introduced its first machines with Airflow technology in 1980 and since then we have had wide experience of pretreating and dyeing with Airflow transport systems on all kind of fabrics,” says Fong’s Europe Director of Sales and Marketing Richard Fander. “Our team of engineers has collected data on dyeing processes, results and consumption figures for years and constantly makes use of this accumulated know-how to optimise the processes of our customers.

“The THEN team understands Airflow dyeing processes and technology based on it guarantees the lowest liquor ratio on round shape machines. The transport of fabric by air reduces the liquor ratio compared to every kind of hydraulically driven transport system.”

He adds that while not every fabric can be dyed and treated on Airflow machines with the same handle and appearance as on hydraulic round shape or long shape machines, where it is applicable, it can lead to significant savings of up to 35% in water, 50% in salt, 20% in dyestuffs and 30% in process time.

The THEN Airflow dyeing machines have several features, including several parallel functions for reducing process time. The VPR system shortens the rinsing time and water usage and the robust and homogeneous spraying device in the nozzle ensures a uniform dyeing in the shortest process time. The very short liquor ratio also reduces the use of salt and chemicals.

Source:

Fong’s Europe / AWOL Media

(c) Freudenberg Performance Materials Holding GmbH
28.04.2023

Freudenberg showcases Superabsorbers and Coated Foams at EWMA 2023

Freudenberg Performance Materials (Freudenberg) is expanding its product portfolio by adding an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Further highlights at EWMA include components for more sustainable wound care, PU foams with directly applied silicone adhesives, antimicrobial systems and an innovative hydrophilic debridement foam. The global manufacturer will be welcoming visitors to Exhibition Stand from May 3 – 5 at EWMA 2023.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

Freudenberg Performance Materials (Freudenberg) is expanding its product portfolio by adding an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Further highlights at EWMA include components for more sustainable wound care, PU foams with directly applied silicone adhesives, antimicrobial systems and an innovative hydrophilic debridement foam. The global manufacturer will be welcoming visitors to Exhibition Stand from May 3 – 5 at EWMA 2023.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

Further highlights
Freudenberg is also presenting the M 1714 wound pad component, one example of a sustainable solution that simultaneously delivers on performance. The dressing consists of bio-based fibers and exhibits a smooth wound contact layer. M 1714 has been evaluated for industrial compostability and conforms to ISO 13432. This enables certification of product biodegradability. Further highlights to be presented in Milan include material systems for the antimicrobial treatment of chronic wounds, including systems that do not use active substances.

Wound dressing with silicone adhesive border
With Freudenberg’s silicone coated foams, manufacturers can reduce the number of process steps, thereby avoiding waste, saving energy and simplifying the supply chain. Compared with conventional foam dressings, the Freudenberg foam product also offers higher flexibility for optimal wound bed contouring and reduces the risk of infection by preventing exudate pooling. Freudenberg is showcasing the prototype of a bordered dressing with a silicone adhesive border. In addition, the variant with an extra-strong silicone border enables longer wear time while at the same time ensuring minimal adherence to new skin that forms at the wound edges.

More effective cleansing results and greater patient comfort
Freudenberg is also showcasing an innovative hydrophilic debridement foam. It is ideally suited for use in wound cavities, offers better cleansing results and reduced risk as well as greater patient comfort.

Source:

Freudenberg Performance Materials Holding GmbH

(c) BTMA
22.03.2023

BTMA welcomes digital dyeing and finishing company Alchemie

Alchemie Technology is the latest company to join the British Textile Machinery Association (BTMA), as all of the organisation’s members gear up to showcase an array of new innovations at ITMA 2023 in Milan from June 8-14 this year.

Cambridge-headquartered Alchemie is the inventor of two technologies – EndeavourTM and NovaraTM.

The Endeavour digital dyeing system produces no wastewater and reduces water consumption by up to 95% compared to traditional dyeing. The virtually waterless process delivers dyed fabric with high colour consistency and colour fastness and does not require post dyeing washing steps which leads to an energy reduction up to 85%. It can deliver any colour shade required and enables on-demand digital colour changeovers in any run length, from a few metres to several kilometres.

Alchemie Technology is the latest company to join the British Textile Machinery Association (BTMA), as all of the organisation’s members gear up to showcase an array of new innovations at ITMA 2023 in Milan from June 8-14 this year.

Cambridge-headquartered Alchemie is the inventor of two technologies – EndeavourTM and NovaraTM.

The Endeavour digital dyeing system produces no wastewater and reduces water consumption by up to 95% compared to traditional dyeing. The virtually waterless process delivers dyed fabric with high colour consistency and colour fastness and does not require post dyeing washing steps which leads to an energy reduction up to 85%. It can deliver any colour shade required and enables on-demand digital colour changeovers in any run length, from a few metres to several kilometres.

Similar energy savings can be achieved with the Novara precision finishing system which utilises a nozzle array to deliver finishing chemistry with millimetre resolution. Finishing chemistries penetrate deeply into the fabric due to the combination of high velocity liquid jetting and precisely-controlled vacuum and textile finishes are applied only where needed, reducing chemistry usage and enabling multi-functionality.

In the past year, Alchemie, backed by Swedish fashion giant H&M, has established a first demonstration hub at customer JSRTEX in Taiwan. It is now progressing plans to set up further centres at customer sites around the world.

Source:

BTMA / AWOL Media

22.02.2023

Rieter: First information on the financial year 2022

  • Sales of CHF 890.3 million in second half-year 2022
  • EBIT margin of around 2% expected for full year 2022
  • Order intake of CHF 1 157.3 million in 2022; order backlog of around CHF 1 540 million as of December 31, 2022
  • Preparations for ITMA 2023 on schedule
  • Implementation of action plan to increase sales and profitability ongoing
  • Rieter site sales process on schedule

For Rieter, in addition to the geopolitical uncertainties, the 2022 financial year was characterized by three main challenges:
Due to the rapid rise in inflation, the exceptionally high order backlog of around CHF 1 840 million at the beginning of 2022 was processed at significantly higher costs. It was only possible to offset these higher costs in part by means of price increases and other remedial measures.

In order to safeguard deliveries, it was necessary to compensate for serious material bottlenecks, particularly in electronic components, which resulted in considerable additional development expenditure.

  • Sales of CHF 890.3 million in second half-year 2022
  • EBIT margin of around 2% expected for full year 2022
  • Order intake of CHF 1 157.3 million in 2022; order backlog of around CHF 1 540 million as of December 31, 2022
  • Preparations for ITMA 2023 on schedule
  • Implementation of action plan to increase sales and profitability ongoing
  • Rieter site sales process on schedule

For Rieter, in addition to the geopolitical uncertainties, the 2022 financial year was characterized by three main challenges:
Due to the rapid rise in inflation, the exceptionally high order backlog of around CHF 1 840 million at the beginning of 2022 was processed at significantly higher costs. It was only possible to offset these higher costs in part by means of price increases and other remedial measures.

In order to safeguard deliveries, it was necessary to compensate for serious material bottlenecks, particularly in electronic components, which resulted in considerable additional development expenditure.

Major expenses were also incurred in connection with the acquired businesses (Accotex, Temco and Winder).

Sales
The realization of sales from the exceptionally high order backlog developed better than expected. With sales of CHF 1 510.9 million, Rieter achieved an increase of 56% compared with the previous year (2021: CHF 969.2 million). In the second half of 2022, especially in the fourth quarter, the measures introduced to address material bottlenecks had a positive impact. Consequently, sales increased to CHF 890.3 million compared with the first six months (first half-year 2022: CHF 620.6 million).

EBIT margin
The trend in the EBIT margin was strongly influenced by substantial cost increases, which could only be offset in part through price increases and other remedial measures. In addition, to compensate for material shortages, expenses were incurred in connection with the development of alternative solutions and the acquired businesses.

Rieter succeeded in improving profitability compared with the first half of 2022 due to the higher sales volume and offsetting measures to compensate for increased costs, and expects a positive EBIT margin of around 2% for the full year 2022 (2021: 4.9%).

Order intake
In line with expectations, the order intake of CHF 1 157.3 million in 2022 was below the record year of 2021 (CHF 2 225.7 million). The market situation is characterized by investment restraint due to geopolitical uncertainties, higher financing costs and consumer reticence in important markets.

Order backlog
The company had an order backlog of around CHF 1 540 million at the end of 2022, which thus extends well into 2023 and 2024. In 2022, Rieter recorded order cancellations of less than 10% of the order backlog of CHF 1 840 million at the beginning of the year.

Preparations for ITMA 2023 on schedule
Rieter has continued to boost its innovative capability and, in order to further extend its technology leadership, will present new innovative solutions at ITMA 2023 in Milan.

Action plan to increase sales and profitability
Implementation of the action plan to increase sales and profitability is ongoing. With regard to the profitability of the order backlog, which remains high, the implemented price increases in combination with a favorable trend in costs, particularly in logistics, are having an impact. In addition, progress was made in eliminating material bottlenecks and reducing expenses for the three acquired businesses.

Rieter site sales process
The sales process for the remaining land at the Rieter site in Winterthur (Switzerland) is proceeding according to plan. In total, around 75 000 m2 of land will be sold. The Rieter CAMPUS is not part of this transaction.

Results press conference 2023
Rieter will provide further details on the 2022 financial year and an outlook for the 2023 financial year on March 9, 2023.

More information:
Rieter financial year 2022
Source:

Rieter Holding AG

(c) Beste Spa
01.02.2023

Beste x HeiQ AeoniQ™ launch first collection

Beste x HeiQ AeoniQ™ announce their partnership with the launch of a capsule in the CARPINI collection at Milano Unica. The fabrics including HeiQ AeoniQ™ are crafted by the Italian textiles manufacturer Beste, well known for supplying high-end fabrics for premium and luxury brands.

The fabrics capsule collection for S/S 24 includes 12 articles made with 100% HeiQ AeoniQ™, linen, and HeiQ AeoniQ™ blends, and cotton and HeiQ AeoniQ™ blends in several different proportions.
The collection is named FLOW, as related to the movement of water and air to be in tune with Nature’s balance and rhythm, with a color range including hay, black, water, caramel, violet, dust, denim, lime, and cobalt.

With this initiative, Beste becomes the first partner to incorporate the HeiQ AeoniQ™ fiber into its active fabric portfolio, and also its Tessuteka, the library that keeps all the fabrics produced by the company since 1993.

Beste x HeiQ AeoniQ™ announce their partnership with the launch of a capsule in the CARPINI collection at Milano Unica. The fabrics including HeiQ AeoniQ™ are crafted by the Italian textiles manufacturer Beste, well known for supplying high-end fabrics for premium and luxury brands.

The fabrics capsule collection for S/S 24 includes 12 articles made with 100% HeiQ AeoniQ™, linen, and HeiQ AeoniQ™ blends, and cotton and HeiQ AeoniQ™ blends in several different proportions.
The collection is named FLOW, as related to the movement of water and air to be in tune with Nature’s balance and rhythm, with a color range including hay, black, water, caramel, violet, dust, denim, lime, and cobalt.

With this initiative, Beste becomes the first partner to incorporate the HeiQ AeoniQ™ fiber into its active fabric portfolio, and also its Tessuteka, the library that keeps all the fabrics produced by the company since 1993.

For Carlo Centonze, HeiQ’s CEO “the partnership with Beste makes total sense for all the values embodied by HeiQ AeoniQ™ that we both share, namely its commitment to circular ethics, practice and promote sustainability, and have a positive impact in the environment while also creating new business opportunities that the market and the Planet so urgently need.”

According to Giovanni Santi, Beste’s CDA president: “Beste SpA benefit company is strongly committed to developing a positive and responsible impact over the environment and the social fabric it is surrounded by. To meet this precise criterion, we use HeiQ AeoniQ™, a new biodegradable fiber developed by HeiQ, a Swiss chemical company that is Beste's constant partner in this indispensable green revolution. The introduction of HeiQ AeoniQ™, namely a fiber that is cellulosic in nature but with characteristics and performances similar to polyester ones, concerns a significant step in the reduction of CO2 emissions and plastics. It is not only a responsible choice, but it also deals with a precise and courageous positioning in the constant battle in favor of our planet by starting from the textile innovation front.”

The new Beste x HeiQ AeoniQ™ fabrics will be displayed at Beste’s booth during the Milano Unica trade show from January 31st to February 2nd, in Milan, Italy.

More information:
HeiQ AeoniQ Beste Milano Unica
Source:

HeiQ

(c) Hohenstein
27.01.2023

OEKO-TEX® ORGANIC COTTON - New label for organic cotton

From April 2023, OEKO-TEX® will officially launch its new ORGANIC COTTON label. Two initial pilot customers have already been certified by the testing service provider Hohenstein: the Indian textile supplier Milan Group and the Turkish cotton producer Akasya.

The new organic label ensures that all requirements for labeling as organic cotton are met. In addition to testing in accordance with OEKO-TEX® STANDARD 100, it ensures that the cotton contains less than ten percent genetically modified material, complies with pesticide limits and guarantees its organic origin.

Textile companies whose products have been certified with the OEKO-TEX® STANDARD 100 can now have their certificates extended to an ORGANIC COTTON certificate after ensuring ecological production.

"A combination with OEKO-TEX® MADE IN GREEN is ideal," explains Ivonne Schramm, Head of OEKO-TEX® at Hohenstein. "This ensures environmental friendliness, transparency and socially responsible conditions in a single certification."

From April 2023, OEKO-TEX® will officially launch its new ORGANIC COTTON label. Two initial pilot customers have already been certified by the testing service provider Hohenstein: the Indian textile supplier Milan Group and the Turkish cotton producer Akasya.

The new organic label ensures that all requirements for labeling as organic cotton are met. In addition to testing in accordance with OEKO-TEX® STANDARD 100, it ensures that the cotton contains less than ten percent genetically modified material, complies with pesticide limits and guarantees its organic origin.

Textile companies whose products have been certified with the OEKO-TEX® STANDARD 100 can now have their certificates extended to an ORGANIC COTTON certificate after ensuring ecological production.

"A combination with OEKO-TEX® MADE IN GREEN is ideal," explains Ivonne Schramm, Head of OEKO-TEX® at Hohenstein. "This ensures environmental friendliness, transparency and socially responsible conditions in a single certification."

The certificate can be used for ready-made articles (e.g. T-shirt, bedspread, etc.) as well as for textile intermediate products (e.g. intermediate products such as raw fibers, yarns, etc.). Mixtures of organic and conventional cultivation are not permitted.

Source:

Hohenstein

(c) FET Ltd
17.01.2023

FET looks forward following sucessful year

Fibre Extrusion Technology Limited (FET) of Leeds, England, a supplier of laboratory and pilot melt spinning systems, is celebrating a record breaking year of sales and product innovation. “Sales revenue for 2022 has easily beaten our previous high” said FET Managing Director, Richard Slack “and the research projects we have collaborated in have become increasingly challenging in terms of technical specification.”

Prestigious new projects during 2022 included a multifilament melt spinning line for Senbis Polymer Innovations, Netherlands enabling the development of textile fibres from recycled polymers or biopolymers; a FET-200LAB wet spinning system at the University of Manchester which will play a major part in advanced materials research in collaboration with the renowned Henry Royce Institute; and a FET-103 Monofilament line for RHEON LABS of London to help develop a hyper viscoelastic fibre from RHEON™ which displays high strain-rate sensitive properties. The latter two of these examples were aided by significant UK grants to develop advanced materials.

Fibre Extrusion Technology Limited (FET) of Leeds, England, a supplier of laboratory and pilot melt spinning systems, is celebrating a record breaking year of sales and product innovation. “Sales revenue for 2022 has easily beaten our previous high” said FET Managing Director, Richard Slack “and the research projects we have collaborated in have become increasingly challenging in terms of technical specification.”

Prestigious new projects during 2022 included a multifilament melt spinning line for Senbis Polymer Innovations, Netherlands enabling the development of textile fibres from recycled polymers or biopolymers; a FET-200LAB wet spinning system at the University of Manchester which will play a major part in advanced materials research in collaboration with the renowned Henry Royce Institute; and a FET-103 Monofilament line for RHEON LABS of London to help develop a hyper viscoelastic fibre from RHEON™ which displays high strain-rate sensitive properties. The latter two of these examples were aided by significant UK grants to develop advanced materials.

FET is now looking forward to 2023 with a record order book. The company’s newly opened Fibre Development Centre features over £1.5 million investment in customer laboratory systems that will further enable fibre trials and product R&D. Three new polymer types were developed with clients in 2022 and several more are lined up in 2023, which is expected to bring the total of different polymer types to more than 40 in multifilament, monofilament and nonwoven formats.

FET will be exhibiting at two major exhibitions in 2023; INDEX 23, a leading Nonwovens show at Geneva in April; and ITMA, Milan, an international textile and garment technology exhibition in June.

Source:

FET Ltd

(c) C.L.A.S.S.
21.09.2022

WHITE and C.L.A.S.S. are back to “Unveiling the Fashion Backstage”

C.L.A.S.S. continues its path of "strategic sustainable synergies" with the aim of sharing its message of responsible innovation, and returns for the second time to Milan Fashion Week with WSM White Sustainable Milano. The objective is to represent a selected and smart path of the production chain related to materials, technologies, production, customization, finishing processes and dyes that are increasingly less impactful on the environment.
 
After debuting last February, “Unveiling the Fashion Backstage”, the educational and narrative journey of WSM | White Sustainable Milano developed in synergy with Giusy Bettoni, founder and CEO of C.L.A.S.S., returns to the VISCONTI HALL and grows in terms of attendance and thematic areas.

The exhibiting copmpanies are: Bemberg™ by Asahi Kasei, Maeba International, Linificio e Canapificio Nazionale SB, Edmos, Toyoshima, Iluna Group and YKK.

C.L.A.S.S. continues its path of "strategic sustainable synergies" with the aim of sharing its message of responsible innovation, and returns for the second time to Milan Fashion Week with WSM White Sustainable Milano. The objective is to represent a selected and smart path of the production chain related to materials, technologies, production, customization, finishing processes and dyes that are increasingly less impactful on the environment.
 
After debuting last February, “Unveiling the Fashion Backstage”, the educational and narrative journey of WSM | White Sustainable Milano developed in synergy with Giusy Bettoni, founder and CEO of C.L.A.S.S., returns to the VISCONTI HALL and grows in terms of attendance and thematic areas.

The exhibiting copmpanies are: Bemberg™ by Asahi Kasei, Maeba International, Linificio e Canapificio Nazionale SB, Edmos, Toyoshima, Iluna Group and YKK.

11.07.2022

ROICA™ partners at Milano Unica with their stretch-infused fabrics

ROICA™, Asahi Kasei's premium stretch fiber manufacturer, strengthens its presence in the high fashion segment thanks to its established network of partners, who will present their latest innovations - activated by ROICA™ - at the upcoming edition of Milano Unica, taking place at Rho Fiera Milano from 12th to 14th July 2022.

Going more in depth in the offers of ROICA™ partners for this season of Milano Unica, they are:

ROICA™, Asahi Kasei's premium stretch fiber manufacturer, strengthens its presence in the high fashion segment thanks to its established network of partners, who will present their latest innovations - activated by ROICA™ - at the upcoming edition of Milano Unica, taking place at Rho Fiera Milano from 12th to 14th July 2022.

Going more in depth in the offers of ROICA™ partners for this season of Milano Unica, they are:

  • Cifra, which presents its innovative garments for men and women, combining fashion and function. Base layers, tops, leggings and jumpsuits are made with natural yarns, or recycled pre- and post-consumer yarns in combination with ROICA™ EF, the sustainable recycled stretch yarn able to complete proposals that offer design, performance and responsibility. The design of the garments, created in Cifra's design office, offers a perfect shape with body mapping technology that creates dedicated ventilation zones, for a feeling of comfort and freshness as well as an innovative aesthetic impact.
  • Iluna Group, whose journey into the new dimension of responsibility continues with developments in GRS (Global Recycled Standard) certified recycled yarns aimed at unprecedented effects in looks, performance and hands. Brand new for this edition of Première Vision is the inclusion of GOTS-certified organic cotton in GRS-certified galloons and allover lace containing ROICA™ EF, so as to meet market demands for natural comfort in the underwear sphere.
  • Maglificio Ripa, which presents the Splash collection for summer 2024, developed in two major themes, united by the same focus on sustainability that results in the use of recycled pre- and post-consumer polyamide and polyester yarns including ROICA™ EF for the sustainable recycled stretch fiber. The first theme encompasses printed, 3D jacquard fabrics, ennobled by innovative processes that move the bottoms for an organic and sometimes irreverent final look. The second theme embodies a cocoon spirit, enveloping like a caress, soft as a hug.
  • Penn Textile Solutions/Penn Italia, whose highlights of the new collection are on one side fabrics developed with the use of Neride eco yarns by Nurel with ROICA™ V550, characterized by restraining lace effect, soft touch and breathable, in combination with tulle as a sustainable basic, and on the other side charmeuses with soft hand, raw cut in combination with a band fabric from the dreamshape family with reinforced gripping edge, made again in Neride eco yarns by Nurel with ROICA™ V550
  • Piave Maitex, whose orientation is, as always, to present new products with the right  balance between technological innovation and aesthetic look, between fashion and comfort, proposals that include sustainable fabrics made in recycled polyester,  polyamide and the sustainable recycled stretch fiber ROICA™ EF, three-dimensional and optical, perforated, plush effects, made by prioritizing technical functionalities such as waterproofness, breathability, transfer and moisture management, opacity and anti-UV as well as anti-abrasion.
  • Sitip, which is one of the premium partners, together with ROICA™, for the creation of the first Scott Racing Team’s responsible biking uniform. This year, the evolution of research and development has also led to the creation of new responsible shorts, made with NATIVE-THUNDERBIKE POWER fabric by Sitip in recycled polyamide and ROICA™ EF yarn by Asahi Kasei. A fabric designed for high-performance sports, particularly suitable for making cycling pants for its maximum coverage and UV protection - thanks to ECLIPSE Sun Protection technology - breathability, comfort and fit. Also the shirt has been produced with Sitip recycled fabrics - NATIVE-BICIMANIA and NATIVE-PIRATA - made with Asahi Kasei's ROICA™ EF sustainable, stretch and certified recycled yarns.
30.06.2022

Milano Unica and C.L.A.S.S. join forces

C.L.A.S.S. will join forces with Milano Unica, 12-14 July, to push the change towards a new generation of fashion through its C.L.A.S.S. SMART SHOP: an online space offering eco-high-tech materials representing a range of categories able to create a new generation of fashion. It is dedicated to students, designers and new generation brands who want to explore and test premium materials mixing style, innovation and responsibility

The C.L.A.S.S. SMART SHOP partners exhibiting at Milano Unica are: ALBINI GROUP, ILUNA GROUP and ZIGNONE.

C.L.A.S.S. will join forces with Milano Unica, 12-14 July, to push the change towards a new generation of fashion through its C.L.A.S.S. SMART SHOP: an online space offering eco-high-tech materials representing a range of categories able to create a new generation of fashion. It is dedicated to students, designers and new generation brands who want to explore and test premium materials mixing style, innovation and responsibility

The C.L.A.S.S. SMART SHOP partners exhibiting at Milano Unica are: ALBINI GROUP, ILUNA GROUP and ZIGNONE.

Source:

C.L.A.S.S.

Thermore launches EVOdown® made of recycled fibers (c) Thermore
09.06.2022

Thermore launches EVOdown® made of recycled fibers

Thermore launches its new product EVOdown®, made of 100% recycled fibers from PET bottles. Thermore EVOdown® bridges the gap between free fibers and traditional padding, delivering the ultra-soft hand and drape of blow-in fibers in a rolled form.

EVOdown® consists of millions of free fibers encapsulated by two containing outer layers. It is light-weighted and has a silky touch.

EVOdown® is another step towards sustainability for the Milan-based company, which has now converted over 97% of its turnover into insulations made of either fully or partially recycled fibers (based on actual sales figures). This brings Thermore closer to an exclusively sustainable product offer. Sustainability has always been part of Thermore’s DNA, as the Group pioneered the use of recycled fibers in the early 80s and mastered it thereafter.

Thermore launches its new product EVOdown®, made of 100% recycled fibers from PET bottles. Thermore EVOdown® bridges the gap between free fibers and traditional padding, delivering the ultra-soft hand and drape of blow-in fibers in a rolled form.

EVOdown® consists of millions of free fibers encapsulated by two containing outer layers. It is light-weighted and has a silky touch.

EVOdown® is another step towards sustainability for the Milan-based company, which has now converted over 97% of its turnover into insulations made of either fully or partially recycled fibers (based on actual sales figures). This brings Thermore closer to an exclusively sustainable product offer. Sustainability has always been part of Thermore’s DNA, as the Group pioneered the use of recycled fibers in the early 80s and mastered it thereafter.

More information:
Thermore Down Fibers plastics Recycling
Source:

Thermore

29.04.2022

Baldwin showcases connected process technologies at Print4All

Baldwin Technology Company Inc. will showcase its latest high-performance color management, surface treatment, LED-UV curing, inspection, defect detection and Industry 4.0-based analytics solutions at Print4All, which is taking place May 3 to 6 at Fiera Milano in Italy.

One of its latest advances — which will be on display at Print4All — is the XP Quatro Series™ LED-UV curing module with one head and two frequencies for broader applications. It is designed to economically and efficiently cure LED-formulated printing inks and coatings on sheetfed and web offset printing presses, as well as on larger-format flexo presses and digital print engines. The XP Quatro Series LED-UV enhances print quality, while operating at top speeds, driving increased productivity and profitability.

Italy’s ACM Flexible Packaging selected Baldwin as its LED-UV partner and became one of the first flexible film converters to offer all LED-UV curing in a narrow to mid-web format. This partnership established LED-UV printing as a growing production standard in flexible packaging and labels. Today, ACM is a 100% LED-UV, non-mercury facility.

Baldwin Technology Company Inc. will showcase its latest high-performance color management, surface treatment, LED-UV curing, inspection, defect detection and Industry 4.0-based analytics solutions at Print4All, which is taking place May 3 to 6 at Fiera Milano in Italy.

One of its latest advances — which will be on display at Print4All — is the XP Quatro Series™ LED-UV curing module with one head and two frequencies for broader applications. It is designed to economically and efficiently cure LED-formulated printing inks and coatings on sheetfed and web offset printing presses, as well as on larger-format flexo presses and digital print engines. The XP Quatro Series LED-UV enhances print quality, while operating at top speeds, driving increased productivity and profitability.

Italy’s ACM Flexible Packaging selected Baldwin as its LED-UV partner and became one of the first flexible film converters to offer all LED-UV curing in a narrow to mid-web format. This partnership established LED-UV printing as a growing production standard in flexible packaging and labels. Today, ACM is a 100% LED-UV, non-mercury facility.

Baldwin’s Print4All booth also will showcase Industry 4.0 and industrial Internet of Things-enabled technologies that work together to achieve greater uptime, productivity and automation. Featured solutions pair sensor-gathered data with operational data from Baldwin equipment to gain live, actionable insights to improve production monitoring, so printers and converters can achieve new levels of color consistency with fewer defects and greater assurance of curing.

Other highlights in Baldwin’s booth include the Corona Slim treatment system, which ensures the exact dyne levels needed for perfect uniformity in application, and the Guardian PQV 100% Print Inspection, which provides complete print quality verification from prepress through production, reporting and archiving.

Source:

Barry-Wehmiller

ROICA™ by Asahi Kasei held its first business summit at Triennale Milano (c) C.L.A.S.S.
14.04.2022

ROICA™ by Asahi Kasei held its first business summit at Triennale Milano

On the 25th of March ROICA™ by Asahi Kasei invited its strategic European partners to the Triennale Design Museum for the first ROICA™ Summit, with the aim of sharing its global strategy and to consolidate relationships that are key to the Asahi Kasei global vision of its fiber and business.

Among the speakers Senior Executive Manager Mr. Shinichiro Haga and its successor Mr. Takehiro Kamiyama, who will take on the new role after more than thirty years in the Asahi Kasei Corporation and more than three years at ROICA™. Together they opened the floor by explaining the ROICA™ business strategy, which is based on three main steps:

On the 25th of March ROICA™ by Asahi Kasei invited its strategic European partners to the Triennale Design Museum for the first ROICA™ Summit, with the aim of sharing its global strategy and to consolidate relationships that are key to the Asahi Kasei global vision of its fiber and business.

Among the speakers Senior Executive Manager Mr. Shinichiro Haga and its successor Mr. Takehiro Kamiyama, who will take on the new role after more than thirty years in the Asahi Kasei Corporation and more than three years at ROICA™. Together they opened the floor by explaining the ROICA™ business strategy, which is based on three main steps:

  1. Continue to speed up ROICA™ responsible innovation  
  2. Continue to speed up ROICA™ international partnerships with a strong focus on responsible innovation
  3. Continue to push a new generation of communication where its story making will align with an authentic and consumer driven storytelling based on values.

Then, Mr. Shinohe Hiroaki Chief Marketing Officer Europe, introduced the new production strategy at global level  together with  its program of partnerships, plus the marketing and communication programs for the next year and beyond in synergy with Giusy Bettoni at C.L.A.S.S.

“We are extremely pleased to be here with our European partners, thanking them for the continuous valuable cooperations that made ROICA™ so special, and sharing with them which will be our next steps in order to be leading responsible innovation. This is a very precious moment, during which we are able to talk face to face and install long-lasting relationships, with the aim of supporting the apparel industry by making premium stretch becoming a key player for wellbeing values, which are extremely precious for the contemporary consumer. And this will be part of sport, lingerie, hosiery , fashion and swimwear wardrobes thanks to the ROICA™ special new generation of premium stretch innovations” affirms Shinohe Hiroaki.

More information:
Asahi Kasei ROICA™ C.L.A.S.S.
Source:

C.L.A.S.S.

24.03.2022

C.L.A.S.S. ICON 2022: Applications open for third edition

On March 15th C.L.A.S.S. Eco Hub launched the 3rd edition of C.L.A.S.S. ICON Award, the annual competition with the aim of sponsoring and rewarding a visionary creative who is able to combine design, responsibility, innovation and communication.

The next selected winner of the international competition for visionary fashion creatives who are able to convey the values of sustainability not only to fashion professionals, but also to the wider public, will be chosen in accordance to the principles of the C.L.A.S.S. Manifesto of Responsible Fashion (https://www.classecohub.org/wp-content/uploads/2022/03/Copia-di-C.L.A.S.S.-ICON-MANIFESTO-2.pdf).

The prestigious reward for the game changers of fashion counts C.L.A.S.S. support at 360° degrees, from material consultancy to communication support and a partnership-like engagement in C.L.A.S.S. activities both on and off-line. This specifically includes:

On March 15th C.L.A.S.S. Eco Hub launched the 3rd edition of C.L.A.S.S. ICON Award, the annual competition with the aim of sponsoring and rewarding a visionary creative who is able to combine design, responsibility, innovation and communication.

The next selected winner of the international competition for visionary fashion creatives who are able to convey the values of sustainability not only to fashion professionals, but also to the wider public, will be chosen in accordance to the principles of the C.L.A.S.S. Manifesto of Responsible Fashion (https://www.classecohub.org/wp-content/uploads/2022/03/Copia-di-C.L.A.S.S.-ICON-MANIFESTO-2.pdf).

The prestigious reward for the game changers of fashion counts C.L.A.S.S. support at 360° degrees, from material consultancy to communication support and a partnership-like engagement in C.L.A.S.S. activities both on and off-line. This specifically includes:

  • 2 coupons valued 1000 € each to source responsibly on THE SMART SHOP, the inspirational materials’ bank and samples' e-shop, that includes a premium selection of the C.L.A.S.S. Material Hub’s materials
  • A consultancy session with C.L.A.S.S. TEAM: the ICON will have the chance to choose between an introduction to responsible innovation workshop or a specific session focusing on brand’s needs, for example responsible sourcing, certifications, communication.
  • Full communication support in terms of press releases, social media and events organisation

C.L.A.S.S. is also happy to announce that its partners will offer an exclusively customed package of marketing and communication activities:

  • Renoon is the app devoted to Responsible Shopping agglomerating thousands of ways to combine style and sustainability values may it be new, pre-loved and rental clothing. The package dedicated to C.L.A.S.S. ICON includes: a dedicated brand page on Renoon, the possibility to check and edit the description of the brand with Renoon's team and a featured article/interview on the new Renoon Library.
  • IDEE BRAND PLATFORM is a company based in Milan, which provides dedicated support in all commercial activity for design and fashion brands through the various stages of their growth steps. The package dedicated to C.L.A.S.S. ICON includes the support of the brand in commercial activities for SS23 and AW23/24.
  • SUSTAINABLE BRAND PLATFORM is a digital platform to measure, improve and communicate fashion brands sustainability making it simple and affordable. Through the creation of a real DIGITAL TOOLBOX SBP wants to give fashion brands all the instruments they need to obtain a global assessment of their sustainable performance. The package dedicated to C.L.A.S.S. ICON includes the Ecoscoring for brand’s sustainability and the creation of its Sustainable ID Card on Sustainable Brand Platform, as well as the use of the SBP logo, communication on social media and an interview in SBP/Magazine.
  • WHITE has always been attentive to the themes of responsible fashion and alongside the new generations of designers. That’s why they decided to support the international sustainability platform C.L.A.S.S. (Creativity, Lifestyle And Sustainable Synergy) with the annual award C.L.A.S.S. ICON, which promotes awareness in new sustainability values. For this reason, WHITE offers to the winner of C.L.A.S.S. ICON: a digital space on its WSM-WHITE platform and a physical space at the next show scheduled for September.

Applications are open until 1st May.
Email to classicon@classecohub.org, with a list of information such as brand vision and objectives, sustainability values and strategy, designer profile, a photo/video story of your latest collection, and any previous award (https://www.classecohub.org/c-l-a-s-s-icon).