From the Sector

Reset
61 results
Robot system (c) STFI
20.03.2024

STFI: Highlights of textile research at Techtextil 2024

STFI will be presenting high-end textile products and solutions at Techtextil 2024. The highlights from current research results and innovations provide an insight into the digitalisation of textile production, show applications for 3D printing and smart technical textiles and provide examples of particularly sustainably designed products as well as innovative approaches for protective and medical textiles.

The central highlight of STFI's presence at Techtextil is a robot system that demonstrates the automated processing of a bobbin frame on a small scale. The pick-and-place application demonstrates camera-supported gripping of the bobbins. The robot is part of the STFI's “Textile Factory of the Future” which demonstrates automation solutions for the textile industry in a laboratory environment.

STFI will be presenting high-end textile products and solutions at Techtextil 2024. The highlights from current research results and innovations provide an insight into the digitalisation of textile production, show applications for 3D printing and smart technical textiles and provide examples of particularly sustainably designed products as well as innovative approaches for protective and medical textiles.

The central highlight of STFI's presence at Techtextil is a robot system that demonstrates the automated processing of a bobbin frame on a small scale. The pick-and-place application demonstrates camera-supported gripping of the bobbins. The robot is part of the STFI's “Textile Factory of the Future” which demonstrates automation solutions for the textile industry in a laboratory environment.

From the field of sustainable products and solutions, a sleeping bag with bio-based and therefore vegan filling material and a natural fibre-based composite element for furniture construction, in which LEDs and capacitive proximity sensors for contactless function control have been applied using embroidery technology, will be on show. Printed heating conductor structures demonstrate current research work for the e-mobility of the future, as the individually controllable seat and interior heating should ultimately reduce weight and save energy compared to conventional heating systems.

While a protective suit for special task forces protects against the dangers of a Molotov cocktail attack, a shin guard and a knee brace with patellar ring illustrate the process combination of 3D printing and UV LED cross-linking. Other highlights from lightweight textile construction include the rib of a vertical rudder of an Airbus A320 and a green snowboard made from recycled carbon fibres.

More information:
STFI Techtextil Smart textiles
Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

15.03.2024

ACIMIT: Italian textile machinery manufacturers at symposia in India

A new promotional initiative aims to boost trade relations between Italy and India in the textile sector. 11 Italian textile machinery manufacturers will be taking part in the forthcoming technological symposia scheduled in New Delhi and Mumbai from 9 to 12 April. The two events, organized by the Italian Trade Agency and supported by the Ministry of Foreign Affairs and International Cooperation, will allow Italian companies to showcase their technologies to a selected audience of Indian textile entrepreneurs.

The textile sector is of great significance in the Indian economy, contributing more than 2% of the GDP and allowing the Country to be among the largest exporter of textile and apparel items. Moreover India represents the third largest foreign market for the Italian textile machinery industry.

In 2022 India imported Italian textile machinery for a total value of about 200 million euro. Referring to the first 9 months of 2023, the value shows a slight decrease compared to the value for the same period of the previous year, but the forecast for the current year remains positive.

A new promotional initiative aims to boost trade relations between Italy and India in the textile sector. 11 Italian textile machinery manufacturers will be taking part in the forthcoming technological symposia scheduled in New Delhi and Mumbai from 9 to 12 April. The two events, organized by the Italian Trade Agency and supported by the Ministry of Foreign Affairs and International Cooperation, will allow Italian companies to showcase their technologies to a selected audience of Indian textile entrepreneurs.

The textile sector is of great significance in the Indian economy, contributing more than 2% of the GDP and allowing the Country to be among the largest exporter of textile and apparel items. Moreover India represents the third largest foreign market for the Italian textile machinery industry.

In 2022 India imported Italian textile machinery for a total value of about 200 million euro. Referring to the first 9 months of 2023, the value shows a slight decrease compared to the value for the same period of the previous year, but the forecast for the current year remains positive.

Italian companies participating in the symposia, all of which are ACIMIT members, are: Autefa, Cubotex, Danitech, Lafer, Mcs, Monti-Mac, Reggiani Macchine, Salvadè, Savio, Sicam, Testa.

Source:

ACIMIT - Association of Italian Textile Machinery Manufacturers

RegioGreenTex Annual Consortium Meeting Photo Euratex
13.03.2024

RegioGreenTex Annual Consortium Meeting in Portugal

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

EURATEX, as project coordinator, ensures the successful implementation of this ambitious initiative. Dirk Vantyghem, EURATEX Director General, commented: “RegioGreenTex is an essential piece of our wider plan to implement the EU Sustainable Textile Strategy. Offering investment support to our SMEs is critical to make this green transition a success.”

Source:

Euratex

STFI: Lightweight construction innovations at JEC World in Paris (c) silbaerg GmbH and STFI (see information on image)
23.02.2024

STFI: Lightweight construction innovations at JEC World in Paris

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

VliesComp
The aim of the industrial partners Tenowo GmbH (Hof), Siemens AG (Erlangen), Invent GmbH (Braunschweig) and STFI united in the VliesComp project is to bring recycled materials back onto the market in various lightweight construction solutions. The application fields "Innovative e-machine concepts for the energy transition" and "Innovative e-machine concepts for e-mobility" were considered as examples. On display at JEC World in Paris will be a lightweight end shield for electric motors made from hybrid nonwovens - a mixture of thermoplastic fibre components and recycled reinforcing fibres - as well as nonwovens with 100% recycled reinforcing fibres. The end shield was ultimately manufactured with a 100% recycled fibre content. The tests showed that, compared to the variant made from primary carbon fibres using the RTM process, a 14% reduction in CO2 equivalent is possible with the same performance. The calculation for the use of the prepreg process using a bio-resin system shows a potential for reducing the CO2 equivalent by almost 70 %.

Bast fibre reinforcement
To increase stability in the plant stem, bast fibres form in the bark area, which support the stem but, in contrast to the rigid wood, are very flexible and allow slender, tall plants to move in the wind without breaking.A new process extracts the bast bark from hemp by peeling.The resulting characteristic values, such as tensile modulus of elasticity, breaking strength and elongation, are very promising in comparison with the continuous rovings made of flax available on the market.The material could be used as reinforcement in lightweight construction.At JEC World, STFI will be exhibiting reinforcing bars that have been processed into a knitted fabric using a pultrusion process based on bio-based reinforcing fibres made from hemp bast for mineral matrices.

Source:

Sächsische Textilforschungsinstitut e.V. (STFI)

20.02.2024

Italian Textile Machinery: 4Q 2023 Orders Remain Stationary

In the fourth quarter of 2023 Italian textile machinery orders index, drawn up by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, appears to be stationary compared to data recorded for the same period in 2022. In terms of absolute value, the index stood at 82.4 points (basis: 2015=100).

This is the result of an upswing in orders from foreign markets, counterbalanced by declining orders on the domestic front. While orders in Italy decreased at 18% rate, a 4% increase was observed abroad. The absolute value of the index on foreign markets amounted to 77.9 points, whereas it came in at 126.2 points domestically. Overall for the fourth quarter, the average order backlog yielded 3.7 months of assured production.

For the whole 2023 year, the index declined 25% overall compared to the 2022 average (absolute index of 82.4). On the home front however, the index dropped 24% (absolute index of 124.5), while slipping 25% abroad (absolute index of 78.4).

In the fourth quarter of 2023 Italian textile machinery orders index, drawn up by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, appears to be stationary compared to data recorded for the same period in 2022. In terms of absolute value, the index stood at 82.4 points (basis: 2015=100).

This is the result of an upswing in orders from foreign markets, counterbalanced by declining orders on the domestic front. While orders in Italy decreased at 18% rate, a 4% increase was observed abroad. The absolute value of the index on foreign markets amounted to 77.9 points, whereas it came in at 126.2 points domestically. Overall for the fourth quarter, the average order backlog yielded 3.7 months of assured production.

For the whole 2023 year, the index declined 25% overall compared to the 2022 average (absolute index of 82.4). On the home front however, the index dropped 24% (absolute index of 124.5), while slipping 25% abroad (absolute index of 78.4).

ACIMIT president Marco Salvadè commented the data: “The orders index for October – December 2023, as elaborated by our Economics Department, confirms an intake of orders that is still weak, with a negative trend in demand for machinery that is ongoing for the domestic market.” Nonetheless, the orders index abroad shows a slight increase. “We estimate that the global geopolitical context is still a source of concern,” continued Salvadè, specifying that, “For the first nine months of 2023, Italian exports on major global markets (i.e. China, Turkey, India and the United States of America), confirm a widespread decline. However, some positive signs emerged in the fourth quarter of last year, as reflected by the latest orders index. For 2024 we expect a consolidation of this trend reversal.”

More information:
ACIMIT
Source:

ACIMIT, the Association of Italian Textile Machinery Manufacturers

ACIMIT: Italian textile machinery orders remain stationary (c) ACIMIT
19.02.2024

ACIMIT: Italian textile machinery orders remain stationary

In the fourth quarter of 2023 Italian textile machinery orders index, drawn up by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, appears to be stationary compared to data recorded for the same period in 2022. In terms of absolute value, the index stood at 82.4 points (basis: 2015=100).

This is the result of an upswing in orders from foreign markets, counterbalanced by declining orders on the domestic front. While orders in Italy decreased at 18% rate, a 4% increase was observed abroad. The absolute value of the index on foreign markets amounted to 77.9 points, whereas it came in at 126.2 points domestically. Overall for the fourth quarter, the average order backlog yielded 3.7 months of assured production.

In the fourth quarter of 2023 Italian textile machinery orders index, drawn up by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, appears to be stationary compared to data recorded for the same period in 2022. In terms of absolute value, the index stood at 82.4 points (basis: 2015=100).

This is the result of an upswing in orders from foreign markets, counterbalanced by declining orders on the domestic front. While orders in Italy decreased at 18% rate, a 4% increase was observed abroad. The absolute value of the index on foreign markets amounted to 77.9 points, whereas it came in at 126.2 points domestically. Overall for the fourth quarter, the average order backlog yielded 3.7 months of assured production.

For the whole 2023 year, the index declined 25% overall compared to the 2022 average (absolute index of 82.4). On the home front however, the index dropped 24% (absolute index of 124.5), while slipping 25% abroad (absolute index of 78.4).
 
ACIMIT president Marco Salvadè commented: "The orders index for October – December 2023, as elaborated by our Economics Department, confirms an intake of orders that is still weak, with a negative trend in demand for machinery that is ongoing for the domestic market."

Nonetheless, the orders index abroad shows a slight increase. We estimate that the global geopolitical context is still a source of concern,” continued Salvadè, specifying that, “For the first nine months of 2023, Italian exports on major global markets (i.e. China, Turkey, India and the United States of America), confirm a widespread decline. However, some positive signs emerged in the fourth quarter of last year, as reflected by the latest orders index. For 2024 we expect a consolidation of this trend reversal."

Source:

ACIMIT - Association of Italian Textile Machinery Manufacturers

28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

12.12.2023

Intertextile Shanghai Home Textiles in August 2024

from both inside and outside of Asia. Looking ahead, the stage will be set once again at the National Exhibition and Convention Center (Shanghai) next year, allowing exhibitors and buyers from the industry to match their trading needs onsite. Thanks to the resumption of global travel and the ongoing industry recovery, the next Autumn edition is slated to attract even more multinational fairgoers and diverse home and contract textile collections. The fair will return in 14 – 16 August 2024.

from both inside and outside of Asia. Looking ahead, the stage will be set once again at the National Exhibition and Convention Center (Shanghai) next year, allowing exhibitors and buyers from the industry to match their trading needs onsite. Thanks to the resumption of global travel and the ongoing industry recovery, the next Autumn edition is slated to attract even more multinational fairgoers and diverse home and contract textile collections. The fair will return in 14 – 16 August 2024.

A recent study showed a significant rise in corporate travel in 2023, driven largely by the resurgence of live business events and the easing of restrictions following several turbulent years. Adding to this, the Chinese government has announced several measures in a bid to attract more international visitors, including a simplified visa application process as the latest initiative.
 
As one of the largest economies in the world, China is renowned for producing high-value products across the home textile spectrum, making Intertextile Shanghai Home Textiles an essential stop for global suppliers and buyers aiming to kick off the next business season.  
 
Emerging markets have become a significant focus for the industry in recent years. China's exports of home textiles to the ASEAN market amounted to around USD 2.09 billion in the first quarter of 2023, with an increase of 18% year-on-year; of which around USD 1.38 billion was exported in finished goods, seeing a rise of over 42% year-on-year[3]. With this growth in trade, buyers from fast growing emerging markets are expected to increasingly benefit from the Intertextile Shanghai Home Textiles platform to fulfil their sourcing needs.
 
The upcoming Autumn edition will continue to comprise a wide range of home textile products, including bedding & towelling, rugs, table & kitchen linen, upholstery & curtain fabrics, editors, home textile technologies and textile design.
 
Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

(c) AVK - Industrievereinigung Verstärkte Kunststoffe e. V.
14.11.2023

Successful SMCCreate 2023 Design Conference in Prague

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

As an introduction, speakers - including CTC/Airbus and Teijin - presented different possible applications for SMC and BMC components, including aircraft interiors, bicycle boxes, and applications in e-mobility. The topic of sustainability was broadly covered, highlighting recycling solutions and experiences (Siemens, IDI, OC, AOC), the use of renewable raw materials, as well new LCA models developed by the SMC BMC Alliance (LCS),

Specifically for designers, the use of the SMC flow and curing modelling was presented (ESI, OC), SMC positioning vs. aluminium (Spartners). The second day concluded with contributions on process optimization options for component production, including speeches by Dieffenbacher, Netzsch and EBG.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

Source: 22nd ITMF Global Textile Industry Survey (19.-29.09.2023) ITMF
Source: 22nd ITMF Global Textile Industry Survey (19.-29.09.2023)
13.10.2023

22nd ITMF Global Textile Industry Survey

  • Business situation remains poor and unchanged
  • Manufacturers show prudence in forecasting future developments

 
According to ITMF’s Global Textile Industry Survey (GTIS) conducted in the middle of September 2023, survey participants exhibited a cautious sentiment regarding the current business situation. The indicator for the business situation stood at -27 percentage points (pp, see Graph 1) because companies in the entire textile value chain were struggling with rising costs and weak demand. Business expectations have remained unchanged since July at around +20 pp (see Graph 2). They have jumped into positive territory in January 2023 based on the assumption that the Chinese economy would give an additional boost, but this hope did not materialise. The analysis indicates that a hard landing of the global economy is not in sight.

  • Business situation remains poor and unchanged
  • Manufacturers show prudence in forecasting future developments

 
According to ITMF’s Global Textile Industry Survey (GTIS) conducted in the middle of September 2023, survey participants exhibited a cautious sentiment regarding the current business situation. The indicator for the business situation stood at -27 percentage points (pp, see Graph 1) because companies in the entire textile value chain were struggling with rising costs and weak demand. Business expectations have remained unchanged since July at around +20 pp (see Graph 2). They have jumped into positive territory in January 2023 based on the assumption that the Chinese economy would give an additional boost, but this hope did not materialise. The analysis indicates that a hard landing of the global economy is not in sight.

Order intake recovered in May 2023, but flattened in July and remained very weak in September (-28 pp). The entire textile value chain is running on minimum levels of orders. As long as brands and retailers do not increase orders, the entire value chain will continue struggling. Order backlog slightly increased globally, from 1.9 months in July to 2.2 months in September 2023. This indicator had been on a falling trend since the end of 2021. The average capacity utilisation rate dropped again globally (69%). Textile manufacturers expect this rate to remain low in six months’ time as well.

Weakening demand has been the major concern in the global textile value chain for a year. In September 2023, this concern grew even stronger due to high inflation rates measured in the last few months, a phenomenon fueled by high energy and high raw material prices. Nevertheless, participants seem not to be concerned by order cancelations and inventory levels remain average along the textile value chain. 

More information:
ITMF market survey
Source:

ITMF

10.10.2023

Textile & Fashion Forum Helsinki 2023

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023 will focus on critical industry themes. The transformation of the textile and fashion industry relies on three key pillars: the creation of different circular business models matching growth with sustainability, a green and digital transition where information technology is necessary to deliver sustainability, and scaling the business, as how start-ups can make a leap and big companies can evolve their growth strategies. These three themes will be discussed in depth during the event.

The speaker lineup, drawn from Finland, Europe and beyond, demonstrates the expertise connecting on this platform. Noteworthy figures include Tiina Alahuhta-Kasko, President & CEO of Marimekko; Kai Mykkänen, Minister of Climate and the Environment of Finland; Marcus Hartmann, Head of Public Affairs & Sustainability at H&M; Liljana K. Forssten, Range Strategist at IKEA; and Virginijus Sinkevičius, European Commissioner (on video).

Source:

Euratex & Finnish Textile & Fashion

20.09.2023

TMAS Members at ITMA Asia + CITME 2023

Members of TMAS – the Swedish Textile Machinery Association – will be taking part in the forthcoming ITMA Asia + CITME exhibition, taking place from November 19-23 2023 at the National Exhibition and Convention Centre in Shanghai, China.

Weaving
In the area of weaving, 93% of the 114,000 new looms delivered in 2022 went to Asia, according to the latest figures from the International Textile Manufacturers Federation (ITMF), with China the top destination, followed by India.
As a result, TMAS members like Vandewiele Sweden AB and Eltex have a huge market to address that has been established over many decades.

Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of the market-leading Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

Members of TMAS – the Swedish Textile Machinery Association – will be taking part in the forthcoming ITMA Asia + CITME exhibition, taking place from November 19-23 2023 at the National Exhibition and Convention Centre in Shanghai, China.

Weaving
In the area of weaving, 93% of the 114,000 new looms delivered in 2022 went to Asia, according to the latest figures from the International Textile Manufacturers Federation (ITMF), with China the top destination, followed by India.
As a result, TMAS members like Vandewiele Sweden AB and Eltex have a huge market to address that has been established over many decades.

Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of the market-leading Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

Yarn and sewing thread monitoring
With nearly 70 years of expertise in yarn sensor technology, Eltex of Sweden AB has been at the forefront of new product development. Its EYE and EyETM systems are capable of accurately and efficiently monitoring the movement and tension of more than 1,000 yarns simultaneously. These systems are suitable for various applications and fibre types, including warping, winding, multiaxial weaving and new material applications.

Eltex sewing tension monitors, such as the ETM422, have been well-received by customers. This device can monitor the tension of sewing threads in real time, effectively improving the quality and safety of sewn products. Particularly in China's rapidly growing automotive manufacturing sector, the ETM422 has seen widespread use to meet the industry’s escalating demands for product safety and quality.

Dyeing and finishing
“Digitalisation, automation and AI have become the key enablers for sustainable gains across the entire textile industry and so much has been achieved in the past few years, especially in terms of automation,” says TMAS secretary general Therese Premler-Andersson. “One area in which TMAS members are really making a difference right now, is in replacing water and energy-intensive technologies for the dyeing and finishing processes with new digital technologies.”

The TexCoat G4 non-contact spray technology for textile finishing and remoistening, for example, will be showcased in Shanghai by Baldwin. It not only reduces water, chemicals and energy consumption, but also provides the flexibility to adapt to a customer’s requirements in terms of single and double-sided finishing applications. The TexCoat G4 can reduce water consumption by as much as 50% compared to traditional padding application processes.

BAE: ‘Best of Bangladesh Europe’ in Amsterdam Photo: Bangladesh Apparel Exchange
06.09.2023

BAE: ‘Best of Bangladesh Europe’ in Amsterdam

On 5th September 2023, the Amsterdam: Best of Bangladesh Europe’ started in the venue of Wastergas in Amsterdam. The 2-day nation branding event was organized by Bangladesh Apparel Exchange (BAE), with support from the Embassy of Bangladesh, Ministry of Commerce, Export Promotion Bureau (EPB) of Bangladesh and in association with PDS.

Tipu Munshi, MP, Commerce Minister, Government of the People’s Republic of Bangladesh; Michiel Sweers, Vice Minister of Foreign Economic Relations, Kingdom of the Netherlands; Shahriar Alam, MP, State Minister for Foreign Affairs, Government of the People’s Republic of Bangladesh; Md Siddiqur Rahman,  Former president of BGMEA; M Riaz Hamidullah, Ambassador of Bangladesh to the Netherlands; Leslie Johnston, Chief Executive Officer, Laudes Foundation; Pallak Seth, Founder & Vice Chairman, PDS Limited; and Mostafiz Uddin, Founder & CEO, Bangladesh Apparel Exchange; attended the inaugural ceremony of the ‘Best of Bangladesh’.

On 5th September 2023, the Amsterdam: Best of Bangladesh Europe’ started in the venue of Wastergas in Amsterdam. The 2-day nation branding event was organized by Bangladesh Apparel Exchange (BAE), with support from the Embassy of Bangladesh, Ministry of Commerce, Export Promotion Bureau (EPB) of Bangladesh and in association with PDS.

Tipu Munshi, MP, Commerce Minister, Government of the People’s Republic of Bangladesh; Michiel Sweers, Vice Minister of Foreign Economic Relations, Kingdom of the Netherlands; Shahriar Alam, MP, State Minister for Foreign Affairs, Government of the People’s Republic of Bangladesh; Md Siddiqur Rahman,  Former president of BGMEA; M Riaz Hamidullah, Ambassador of Bangladesh to the Netherlands; Leslie Johnston, Chief Executive Officer, Laudes Foundation; Pallak Seth, Founder & Vice Chairman, PDS Limited; and Mostafiz Uddin, Founder & CEO, Bangladesh Apparel Exchange; attended the inaugural ceremony of the ‘Best of Bangladesh’.

Three MoU were signed in the inaugural for the development of the industries of Bangladesh.
The 1st MoU was signed between Bangladesh Apparel Exchange and Eindhoven International Project Office (EIPO). The 2nd MoU was signed between Bangladesh Apparel Exchange and Apparel Impact Institution. The 3rd MoU was signed between Bangladesh Apparel Exchange and Oxfam.
More than 35 companies from various fields, including apparel, textiles, agriculture, handicrafts, and other sectors, participated in the initiative.

The event held six interactive panel sessions on the topics "Bangladesh – Perspectives from an Emerging Economy", "Sustainable Sourcing Realities: Challenges, Achievements & Next Steps”, “Empowering the Future: Advancing Safety & Well-being for Garments Workforce in Bangladesh", "Bangladesh Agro-Food: A Next Opportunity for Collaboration", "Impact Investing - The Next Frontier", and “Sustainable Synergy: Circular Economy, Climate Action & Bangladesh’s Future".

A Bangladesh Innovation Runway was presented by Pacific Jeans at the event. The Bangladesh Innovation Runway showcased the ability of the country in producing high end, sustainable and innovative apparel products.

Source:

Bangladesh Apparel Exchange

Giorgio Calculli (c) ACIMIT
Giorgio Calculli
04.09.2023

ACIMIT: New Managing Director

Giorgio Calculli has been appointed new managing director of ACIMIT, the Association of Italian Textile Machinery Manufacturers. A law graduate with a Master’s degree in training and employment policies, he has been on staff at ACIMIT since 2006 as head of the Association’s training, internal relations and technical department. Calculli takes over as ACIMIT managing director from Federico Pellegata, who after 25 years managing the Association has been appointed CEO of ACIMIT Servizi srl, the company set up by ACIMIT to provide services in support of associated member companies for the promotion of the Italian textile machinery industry in Italy and abroad.

Giorgio Calculli has been appointed new managing director of ACIMIT, the Association of Italian Textile Machinery Manufacturers. A law graduate with a Master’s degree in training and employment policies, he has been on staff at ACIMIT since 2006 as head of the Association’s training, internal relations and technical department. Calculli takes over as ACIMIT managing director from Federico Pellegata, who after 25 years managing the Association has been appointed CEO of ACIMIT Servizi srl, the company set up by ACIMIT to provide services in support of associated member companies for the promotion of the Italian textile machinery industry in Italy and abroad.

“It has been a truly enriching experience,” asserts Federico Pellegata, “for which I am grateful to our associated members, ACIMIT’s Board, and the Association’s presidents who have served during my years in ACIMIT. However, my commitment to continue to promote the Italian textile machinery sector by no means ends here. As CEO of ACIMIT Servizi, I will continue to work relentlessly to ensure that ITMA, the world’s primary textile machinery trade fair, remains a representative showcase for the success of Italian manufacturers in the sector, as has been the case for the editions of the exhibition held in Italy in 2015 and 2023.”

ACIMIT managing director Giorgio Calculli comments: “I wish to thank the Board of ACIMIT for the appointment and for the opportunity to lend continuity to the work carried out by Federico Pellegata, for whom the success enjoyed at the latest edition of ITMA is only the most evident expression. I will work to further develop the membership base and ensure member companies receive maximum support from the Association in their business activities.”

More information:
ACIMIT Giorgio Calculli
Source:

ACIMIT

Hygienix 2023 (c) INDA
26.07.2023

INDA Opens Registration and Tabletop Reservations for Hygienix™ 2023

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration and tabletop exhibit reservations are open for the ninth edition of Hygienix™, November 13-16, New Orleans, Louisiana. More than 450 absorbent hygiene and personal care professionals from around the world will gather for four days of networking, presentations, and business opportunities.
 
The theme for this year’s Hygienix is “Shaping the Future of Absorbent Hygiene.” The event will focus on the market’s continued growth with presentations on sustainability, technology advancements, disruptive small brands, and market data and trends. Hygienix will also offer a workshop on absorbent hygiene systems led by Jim Robinson, Absorbent Hygiene Insights, LLC, Monday, November 13th. The full Hygienix program will be announced at a later date.
 
INDA is also introducing a new element for Hygienix – pre-conference webinars. Carlos Richer, Principal, Diaper Testing International, will present insights and trends in diaper design in the U.S. market and Heidi Beatty, CEO, Crown Abbey, LLC, will share her expertise in the absorbent hygiene sector.
 

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration and tabletop exhibit reservations are open for the ninth edition of Hygienix™, November 13-16, New Orleans, Louisiana. More than 450 absorbent hygiene and personal care professionals from around the world will gather for four days of networking, presentations, and business opportunities.
 
The theme for this year’s Hygienix is “Shaping the Future of Absorbent Hygiene.” The event will focus on the market’s continued growth with presentations on sustainability, technology advancements, disruptive small brands, and market data and trends. Hygienix will also offer a workshop on absorbent hygiene systems led by Jim Robinson, Absorbent Hygiene Insights, LLC, Monday, November 13th. The full Hygienix program will be announced at a later date.
 
INDA is also introducing a new element for Hygienix – pre-conference webinars. Carlos Richer, Principal, Diaper Testing International, will present insights and trends in diaper design in the U.S. market and Heidi Beatty, CEO, Crown Abbey, LLC, will share her expertise in the absorbent hygiene sector.
 
More than 50 companies will showcase their innovations and technologies during the evening tabletop exhibits and receptions. Participants will be able to discuss their needs with technical leaders and source better solutions for their products, Nov. 14-15.
 
Nominations are being accepted through August 7th for the Hygienix Innovation Award™. Three finalists will be selected to present their absorbent hygiene products on Tuesday, November 14th to hundreds of senior-level professionals. The winner of the Award will be announced at the end of the event, Thursday, November 16th.

More information:
INDA Hygienix
Source:

INDA

(c) INDA
16.06.2023

Registration for FiltXPO™ 2023 is now open

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration is open for FiltXPO™ 2023, Oct. 10-12, 2023, Navy Pier, Chicago, Illinois USA. More than 130 exhibitors from the filtration supply chain will showcase their solutions, technologies, and innovations to over 1,200 global professionals. FiltXPO will also feature a three-day technical program covering new technology, products, and research.

Exhibit stand reservations have been brisk, exceeding the prior two editions of FiltXPO. “We are pleased to see the strong interest in exhibiting at FiltXPO. It speaks to the strength of the industry and that filtration products continue to evolve for clean air and water, as well as safer food, beverages, and biopharmaceuticals,” said Joe Tessari, Associate Director of Exhibit Sales.

An important part of the FiltXPO event is the 1.5-day Filter Media Training Course. Participants will learn about the physics of filtration, how nonwoven media is designed and used in air and liquid filtration, the latest market trends, which applications have unmet needs, as well as testing standards.

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration is open for FiltXPO™ 2023, Oct. 10-12, 2023, Navy Pier, Chicago, Illinois USA. More than 130 exhibitors from the filtration supply chain will showcase their solutions, technologies, and innovations to over 1,200 global professionals. FiltXPO will also feature a three-day technical program covering new technology, products, and research.

Exhibit stand reservations have been brisk, exceeding the prior two editions of FiltXPO. “We are pleased to see the strong interest in exhibiting at FiltXPO. It speaks to the strength of the industry and that filtration products continue to evolve for clean air and water, as well as safer food, beverages, and biopharmaceuticals,” said Joe Tessari, Associate Director of Exhibit Sales.

An important part of the FiltXPO event is the 1.5-day Filter Media Training Course. Participants will learn about the physics of filtration, how nonwoven media is designed and used in air and liquid filtration, the latest market trends, which applications have unmet needs, as well as testing standards.

Source:

INDA, Association of the Nonwoven Fabrics Industry

09.06.2023

EURATEX: Meeting about Industry 5.0 concept

On the occasion of EURATEX’ General Assembly held in Milan on 7 June, the European textile industry  discussed the relationship between innovation, sustainability and people in the industry of tomorrow. EURATEX members welcomed the Textiles Transition Pathway, released on 6 June by the Commission, as a valuable roadmap to ensure a successful green and digital transition. The meeting in Milan was also the occasion to strengthen links with textile machine manufacturers, gathering at ITMA 2023.

Hosted by Sistema Moda Italia (SMI), EURATEX meetings addressed the crucial issue of how to develop new competitive business models for the future, following the Industry 5.0 concept. In 2021, the European Commission launched “Industry 5.0”, which puts the wellbeing of the worker at the centre of the production process and the use of new technologies to provide prosperity beyond jobs and growth, while respecting the production limits of the planet.

On the occasion of EURATEX’ General Assembly held in Milan on 7 June, the European textile industry  discussed the relationship between innovation, sustainability and people in the industry of tomorrow. EURATEX members welcomed the Textiles Transition Pathway, released on 6 June by the Commission, as a valuable roadmap to ensure a successful green and digital transition. The meeting in Milan was also the occasion to strengthen links with textile machine manufacturers, gathering at ITMA 2023.

Hosted by Sistema Moda Italia (SMI), EURATEX meetings addressed the crucial issue of how to develop new competitive business models for the future, following the Industry 5.0 concept. In 2021, the European Commission launched “Industry 5.0”, which puts the wellbeing of the worker at the centre of the production process and the use of new technologies to provide prosperity beyond jobs and growth, while respecting the production limits of the planet.

The keynote speakers, Francesco Pinto (Chairman, Yamamay) and Claudio Cavacini (Director of Retail Industry Solutions & Strategy, Salesforce), presented how the digital transformation is affecting companies in the retail industry and how they should adapt to maintain their competitive edge. A panel session of textile machinery manufacturers debated how their companies can help delivering this transformation through state of the art machineries. They all agreed that it requires common efforts by all actors and stakeholders along the textile value chain and public support to make the necessary investments. According to Enzo Maurer, ITMA President, ITMA 2023 in Milan will exactly showcase excellence in innovation and new available technologies to make a leap forward in sustainability.

According to Sergio Tamborini, "we are particularly honored to host this event organized by Euratex, the association which is the voice of the European textile industry and its demands, especially those concerning the circular economy. Sistema Moda Italia wants to play its part and there are priorities, from legislation on extended producer responsibility (EPR) in Italy to eco-design, where textiles and clothing will act as a testing ground. SMI's goal will be to continue to encourage the debate on circularity  promoting it in all institutional settings aiming to a growing sustainable  supply chain.”

Alberto Paccanelli, EURATEX President added: “Today’s discussions showed that we are ready to take up new challenges. Nevertheless, this  transition towards a textiles 5.0 can only happen with the support of all actors, from policy makers to retailers. Today’s meeting was also the occasion to review the EU transition pathway for the textiles ecosystem, published yesterday by the European Commission. The pathway is the perfect example of a co-creation process between the European institutions and the stakeholders. We hope that other EU initiatives or legislative proposals will follow the same co-creative process.”

Source:

EURATEX

(c) ACIMIT
22.05.2023

Italian Textile Machinery: Drop in orders for 2023 first quarter

The textile machinery orders index for the first quarter of 2023, as processed by the Economics Office of ACIMIT, the Association of Italian Textile Machinery Manufacturers, declined markedly compared to January-March 2022 (-35%). In absolute terms, the index stood at 84.8 points (basis: 2015=100).

This result is mainly due to a reduction in the orders intake recorded by manufacturers on foreign markets. Indeed, foreign orders dropped by 40%, whereas the domestic market showed a 14% increase. The absolute value of the index settled at 78.3 points abroad, while it measured in at 148.1 points in Italy. During this year’s first quarter, booked orders stood at 4.2 months of guaranteed production.

ACIMIT president Alessandro Zucchi stated that, “The order index for the first quarter confirm a trend of the past few quarters, where uncertainty still predominates in global markets, both in terms of a macroeconomic framework that is characterized by a penalizing inflationary trend and ongoing geopolitical tensions. This is a scenario that this does not facilitate investment plans for businesses.”

The textile machinery orders index for the first quarter of 2023, as processed by the Economics Office of ACIMIT, the Association of Italian Textile Machinery Manufacturers, declined markedly compared to January-March 2022 (-35%). In absolute terms, the index stood at 84.8 points (basis: 2015=100).

This result is mainly due to a reduction in the orders intake recorded by manufacturers on foreign markets. Indeed, foreign orders dropped by 40%, whereas the domestic market showed a 14% increase. The absolute value of the index settled at 78.3 points abroad, while it measured in at 148.1 points in Italy. During this year’s first quarter, booked orders stood at 4.2 months of guaranteed production.

ACIMIT president Alessandro Zucchi stated that, “The order index for the first quarter confirm a trend of the past few quarters, where uncertainty still predominates in global markets, both in terms of a macroeconomic framework that is characterized by a penalizing inflationary trend and ongoing geopolitical tensions. This is a scenario that this does not facilitate investment plans for businesses.”

However, this uncertainty does not appear to affect the sector’s operators, who are nonetheless permeated by a sense of optimism, as is also testified by the positive data drawn from a comparison with orders from the previous quarter (October-December 2022), for which total orders had been slightly on the rise at +3%. Indeed, the president of ACIMIT confirms that, “Manufacturers in our sector don’t lack for work, having filled up on orders last year and are now busy fulfilling them. The forecasts for 2023 remain positive”. Zucchi concluded, “I expect this confirmation of a healthy manufacturing sector to come from ITMA Milan, the world’s premier trade show dedicated to textile and clothing technologies, slated to open on June 8th at the Rho Fiera exhibition spaces. The exhibit will feature over 400 Italian manufacturers, taking up approximately 30% of the entire exhibition space. This figure is in itself a result that confirms the leadership role of Italy’s textile machinery manufacturers”.

31.03.2023

NCTO: State of the U.S. Textile Industry Address

National Council of Textile Organizations (NCTO) Chairman David Poston delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 19th Annual Meeting on March 30.

Mr. Poston’s speech highlighted the impacts of macroeconomic factors on the U.S. textile industry and the resilience of the U.S. textile industry; trade and investment data showing growth in the sector across the board; and NCTO’s policy priorities for domestic textile manufacturers.

“The U.S. textile and apparel industry faced challenging macroeconomic conditions throughout the year,” Poston states in the speech. “Despite these challenges, there were also many positive trends that helped offset some of those pressures, including softening inflation towards the latter half of the year, coupled with a surge in onshoring and nearshoring that led to historic investments, commitments and expansion in the U.S. and the Western Hemisphere.”

Click here for his full remarks.

National Council of Textile Organizations (NCTO) Chairman David Poston delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 19th Annual Meeting on March 30.

Mr. Poston’s speech highlighted the impacts of macroeconomic factors on the U.S. textile industry and the resilience of the U.S. textile industry; trade and investment data showing growth in the sector across the board; and NCTO’s policy priorities for domestic textile manufacturers.

“The U.S. textile and apparel industry faced challenging macroeconomic conditions throughout the year,” Poston states in the speech. “Despite these challenges, there were also many positive trends that helped offset some of those pressures, including softening inflation towards the latter half of the year, coupled with a surge in onshoring and nearshoring that led to historic investments, commitments and expansion in the U.S. and the Western Hemisphere.”

Click here for his full remarks.

02.03.2023

VDMA: Way2ITMA

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

Dirk Vantyghem introduced the core issues of the EU textile strategy launched in 2022, which is the most ambitious plan ever, to push the textile sector towards sustainability and transparency, and promote a new circular business model. If wrongly designed, that new framework may collapse the European textile value chain. But if done rightly, the changes ahead could bring a paradigm shift in the sector, where competitiveness is no longer based on price only, but also on sustainability and innovation, explained Vantyghem.

Francis Elias Junker showed high level of expertise for mechanical textile recycling for both spinning and nonwovens industries that Andritz has. The company has a diversity of solutions to offer and several cooperation partners, covering the value chain from recovery of fiber to the chemical modification and preparation for the production of yarn.

Tanja Karila gave an overview of how Infinited Fiber is turning textile waste into new fibers. Patented technology turns post-consumer textile waste into brand new premium quality fibers for the textile industry. The textile-to-textile recycling technology captures the value in waste that would otherwise be landfilled or burned.

More information:
ITMA 2023 Sustainability Webinar
Source:

VDMA e. V.
Textile Machinery