From the Sector

Reset
15 results
28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

01.11.2023

VDMA @ ITMA ASIA: Smart technologies for green textile production

At ITMA ASIA + CITME end of November in Shanghai, 40 VDMA members will present their technologies and solutions for the Chinese and Asian markets under the heading "smart technologies for green textile production". This year’s ITMA ASIA is the first major post-Corona textile machinery fair in China.

The exhibiting VDMA members cover nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing.  

The VDMA Textile Machinery Association and VDMA China will be present in the industry hub in Hall 8 zone B to support the members before and during the fair. The industry hub is also contact point for visitors who want to inform themselves about the exhibiting VDMA members. 

At ITMA ASIA + CITME end of November in Shanghai, 40 VDMA members will present their technologies and solutions for the Chinese and Asian markets under the heading "smart technologies for green textile production". This year’s ITMA ASIA is the first major post-Corona textile machinery fair in China.

The exhibiting VDMA members cover nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing.  

The VDMA Textile Machinery Association and VDMA China will be present in the industry hub in Hall 8 zone B to support the members before and during the fair. The industry hub is also contact point for visitors who want to inform themselves about the exhibiting VDMA members. 

Source:

VDMA e. V.
Textile Machinery

20.09.2023

TMAS Members at ITMA Asia + CITME 2023

Members of TMAS – the Swedish Textile Machinery Association – will be taking part in the forthcoming ITMA Asia + CITME exhibition, taking place from November 19-23 2023 at the National Exhibition and Convention Centre in Shanghai, China.

Weaving
In the area of weaving, 93% of the 114,000 new looms delivered in 2022 went to Asia, according to the latest figures from the International Textile Manufacturers Federation (ITMF), with China the top destination, followed by India.
As a result, TMAS members like Vandewiele Sweden AB and Eltex have a huge market to address that has been established over many decades.

Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of the market-leading Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

Members of TMAS – the Swedish Textile Machinery Association – will be taking part in the forthcoming ITMA Asia + CITME exhibition, taking place from November 19-23 2023 at the National Exhibition and Convention Centre in Shanghai, China.

Weaving
In the area of weaving, 93% of the 114,000 new looms delivered in 2022 went to Asia, according to the latest figures from the International Textile Manufacturers Federation (ITMF), with China the top destination, followed by India.
As a result, TMAS members like Vandewiele Sweden AB and Eltex have a huge market to address that has been established over many decades.

Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of the market-leading Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

Yarn and sewing thread monitoring
With nearly 70 years of expertise in yarn sensor technology, Eltex of Sweden AB has been at the forefront of new product development. Its EYE and EyETM systems are capable of accurately and efficiently monitoring the movement and tension of more than 1,000 yarns simultaneously. These systems are suitable for various applications and fibre types, including warping, winding, multiaxial weaving and new material applications.

Eltex sewing tension monitors, such as the ETM422, have been well-received by customers. This device can monitor the tension of sewing threads in real time, effectively improving the quality and safety of sewn products. Particularly in China's rapidly growing automotive manufacturing sector, the ETM422 has seen widespread use to meet the industry’s escalating demands for product safety and quality.

Dyeing and finishing
“Digitalisation, automation and AI have become the key enablers for sustainable gains across the entire textile industry and so much has been achieved in the past few years, especially in terms of automation,” says TMAS secretary general Therese Premler-Andersson. “One area in which TMAS members are really making a difference right now, is in replacing water and energy-intensive technologies for the dyeing and finishing processes with new digital technologies.”

The TexCoat G4 non-contact spray technology for textile finishing and remoistening, for example, will be showcased in Shanghai by Baldwin. It not only reduces water, chemicals and energy consumption, but also provides the flexibility to adapt to a customer’s requirements in terms of single and double-sided finishing applications. The TexCoat G4 can reduce water consumption by as much as 50% compared to traditional padding application processes.

09.06.2023

NCTO: Industry roundtable discussion with key textile executives

Dr. Laurie-Ann Agama, Acting Assistant U.S. Trade Representative (USTR) for Textiles, wrapped up a three-day visit of state-of-the art U.S. textile manufacturing facilities in North and South Carolina, highlighting the importance of trade policies that bolster the competitiveness of the vibrant domestic supply chain that contributes significantly to the U.S. economy and workforce.

Dr. Agama, who advises the nation’s top trade chief on textile and apparel trade policy matters and conducts and oversees negotiations affecting textiles and apparel products, was joined by USTR textile trade officials in touring seven textile manufacturers including: Glen Raven, Barnet, Standard Textile, Parkdale Mills, Beverly Knits, Gildan, and Unifi.

Her three-day tour culminated in an industry roundtable discussion with key textile executives hosted by Unifi, in Greensboro, N.C.

Dr. Laurie-Ann Agama, Acting Assistant U.S. Trade Representative (USTR) for Textiles, wrapped up a three-day visit of state-of-the art U.S. textile manufacturing facilities in North and South Carolina, highlighting the importance of trade policies that bolster the competitiveness of the vibrant domestic supply chain that contributes significantly to the U.S. economy and workforce.

Dr. Agama, who advises the nation’s top trade chief on textile and apparel trade policy matters and conducts and oversees negotiations affecting textiles and apparel products, was joined by USTR textile trade officials in touring seven textile manufacturers including: Glen Raven, Barnet, Standard Textile, Parkdale Mills, Beverly Knits, Gildan, and Unifi.

Her three-day tour culminated in an industry roundtable discussion with key textile executives hosted by Unifi, in Greensboro, N.C.

U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industries participated in the roundtable and outlined critical policies, such as: the importance of maintaining the yarn forward rule of origin in the Dominican Republic-Central America Free Trade Agreement (CAFTA-DR) and other trade agreements; advancing the Miscellaneous Tariff Bill (MTB) and its importance to domestic manufacturers; closing the de minimis loophole in U.S. trade law; addressing larger systemic trade issues, particularly the use of forced labor, with China; and upholding buy American and Berry Amendment government procurement policies.

“We deeply appreciate Assistant USTR Agama’s visit to the heart of the U.S. textile industry in North and South Carolina this week to meet with U.S. textile executives and experience first-hand the breadth of the industry’s innovation, advanced sustainability practices, capital investments and critical contributions to local economies and the U.S. economy as a whole,” said Kim Glas, president and CEO of NCTO. “The three-day visit by Dr. Agama and the USTR textile team included facility tours of several NCTO member companies, all of which have made major investments in state-of-the-art manufacturing facilities that are part of a broader domestic industry supply chain that produced $65.8 billion in output in 2022 and employed 538,000 workers.”

Glas continued: “We are also grateful for Dr. Agama’s participation in the industry roundtable hosted by Unifi and substantive discussions around policy opportunities and challenges. We look forward to working closely with Dr. Agama, the USTR textile team and U.S. Trade Representative Ambassador Katherine Tai to advance policies that provide incentives for onshoring and nearshoring production and bolstering the industry’s competitiveness, while enforcing policies that address illegal trade practices that undermine this industry.”

“The U.S. textile industry has always been resilient, innovative, and a driving force of our nation’s competitiveness,” said Acting Assistant U.S. Trade Representative for Textiles Dr. Laurie-Ann Agama. “For USTR, this local engagement and conversations underscore our need to create trade policies that put workers first and promote inclusive economic growth. The spinning, knitting, and weaving operations of the textile industry are at the center of many communities across the Carolinas. This was another opportunity to hear first-hand how we trade can create jobs that allow workers, businesses, and communities to thrive.”

Source:

National Council of Textile Organizations

04.10.2022

EURATEX response to the latest EU Energy Council decision

  • More ambition and joint European efforts needed

On Friday 30 September, the EU Energy ministers approved a Council Regulation proposal to address high energy prices. The Regulation focusses on the electricity prices and electricity demand reduction, on a solidarity levy from the fossil fuel sector and a retail levy for SMEs. While these initiatives are driven by goodwill, they miss the point of bringing gas prices down – the one measure that would bring the biggest impact on European industry.

EURATEX – as the voice of the European apparel and textiles manufacturers – regrets this lack of ambition: the Regulation does not foresee any meaningful action to directly support the European industry. This can accelerate the de-industrialisation of Europe and loss of industrial capacity to secure the European standard of living and implementing the Green Deal.

  • More ambition and joint European efforts needed

On Friday 30 September, the EU Energy ministers approved a Council Regulation proposal to address high energy prices. The Regulation focusses on the electricity prices and electricity demand reduction, on a solidarity levy from the fossil fuel sector and a retail levy for SMEs. While these initiatives are driven by goodwill, they miss the point of bringing gas prices down – the one measure that would bring the biggest impact on European industry.

EURATEX – as the voice of the European apparel and textiles manufacturers – regrets this lack of ambition: the Regulation does not foresee any meaningful action to directly support the European industry. This can accelerate the de-industrialisation of Europe and loss of industrial capacity to secure the European standard of living and implementing the Green Deal.

“We call on the EU and Member States to pursue our common European interests. The hesitation to adopt a European price cap on natural gas, accompanied by massive national spending programs to subsidise domestic gas consumption, is a dereliction of duty”, said Director General Dirk Vantyghem.

Triggering competition among Member States rather than promoting cooperation in bringing gas prices down for all European companies will also prove ineffective: indeed, the industrial structure in the European Union is fully integrated. Once a segment of the value chain perishes because of the crisis in one country, all companies based in the EU will suffer its negative effect, driving prices up in the supply chain and adding further strain to our operations. The European industry will be saved as a unified industry, or it will not be saved at all. Fragmenting the internal market will not protect any Member State’s domestic manufacturing.

In addition to a EU-wide price cap on gas, EURATEX calls on the European Commission to swiftly amend the Temporary Crisis Framework, making sure the criteria and thresholds applied do not exclude vulnerable companies from possible support (e.g. in textile finishing and services). Euratex also encourages the European Commission to revise the ETS Indirect Carbon Leakage mechanism and include the man-made fibres, non-wovens, spinning and weaving sectors.

It is high time now for the European Union, said the association – in particular for Member States and the Commission – to step up their ambition and adopt a European vision: a chaotic and fragmented approach will not mitigate the crisis but accelerate it.

Source:

Euratex

08.07.2022

Swedish textile machinery in Brazil at Febratex

A delegation from TMAS, the Swedish textile machinery association, will participate in the forthcoming Febratex textile show which is being held in the German Village Park in Blumenau, in Santa Catarina, Brazil from August 23-26.

As the fourth largest textiles manufacturer in the world, Brazil’s annual revenues from textiles and apparel amount to an annual $48 billion and the industry employs around 1.5 million people directly.

As with the USA and many European countries, product shortages resulting directly from the Covid-19 pandemic, and subsequent supply chain difficulties, have emphasised to Brazil’s industry the attractiveness of more diversified and shorter supply chains which are closer to customers wherever possible. In the past two years, there has been less reliance on imports from Asia to Brazil, and opportunities are arising again for local manufacturing.

Svegea of Sweden has supplied many automatic collarette cutters to Brazilian companies, which are used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

A delegation from TMAS, the Swedish textile machinery association, will participate in the forthcoming Febratex textile show which is being held in the German Village Park in Blumenau, in Santa Catarina, Brazil from August 23-26.

As the fourth largest textiles manufacturer in the world, Brazil’s annual revenues from textiles and apparel amount to an annual $48 billion and the industry employs around 1.5 million people directly.

As with the USA and many European countries, product shortages resulting directly from the Covid-19 pandemic, and subsequent supply chain difficulties, have emphasised to Brazil’s industry the attractiveness of more diversified and shorter supply chains which are closer to customers wherever possible. In the past two years, there has been less reliance on imports from Asia to Brazil, and opportunities are arising again for local manufacturing.

Svegea of Sweden has supplied many automatic collarette cutters to Brazilian companies, which are used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

Svegea supplies many other bespoke machines for applications in the production of both garment components and technical textiles, including rewinding, measuring, inspection and band knife machines.

Eton Systems, the inventor and world’s leading provider of automated production systems for apparel and other textile-based processes, has supplied a large amount of workstations to Brazilian companies over the years, and believes its newly-launched Opta system is good news for this market becoming more efficient and profitable.

Automation is also high on the agenda of ACG Kinna Automatic, which specialises in automation solutions for filled products such as quilts, pillows and mattresses and also has extensive knowledge in areas such as bed linen and textile filters.

Given Brazil’s extensive forestry sector, the country is a key market for Texo AB, one of the world’s leading manufacturers of weaving machines for the production of paper machine clothing (PMC).

All paper manufacturing machines require a regular supply of PMC, which as large continuous engineered fabrics, carry the paper stock through each stage of the paper production process. With technologically sophisticated designs, they employ fibres and other polymeric materials in complex structures and each paper machine has an average of ten separate fabrics installed on it. Although the PMC business represents just a small proportion of the total cost of manufacturing paper, it can have a significant impact on the quality of the paper, the efficiency of a machine and machine production rates.

More information:
TMAS Febratex
Source:

AWOL Media

(c) VDMA
Award winners with foundation chairman and professors
23.06.2022

VDMA: Junior engineers with focus on sustainability

On the occasion of the Techtextil fair in Frankfurt, the Chairman of VDMA’s Walter Reiners-Stiftung Foundation, Peter D. Dornier, has awarded prizes to seven successful young engineers. For the first time, the Foundation awarded two Sustainability Awards. They are awarded to academic works in which, for example, solutions for resource-saving products and technologies are developed.

A Sustainability Prize in the category Project Work, endowed with 3.000 euros was awarded to Simon Hoebel, TU Dresden, for his thesis on recycled thermoplastic fibres for composite components.
Marina Michel, TU Dresden, received a Sustainability Award in the category Master, worth 3.500 euros. The topic of her master thesis was the functionalisation of yarns for the filtration of micro- and nanoplastics from water.

A Promotion Prize in the category Project Work, endowed with 4.000 euros, was awarded to a student group from RWTH Aachen. The teamwork of Luis Gleissner, Leopold Habersbrunner, Frederic Olbrich and Frederik Schicks was the construction of a test rig for tests on oil-adsorbing textiles.

On the occasion of the Techtextil fair in Frankfurt, the Chairman of VDMA’s Walter Reiners-Stiftung Foundation, Peter D. Dornier, has awarded prizes to seven successful young engineers. For the first time, the Foundation awarded two Sustainability Awards. They are awarded to academic works in which, for example, solutions for resource-saving products and technologies are developed.

A Sustainability Prize in the category Project Work, endowed with 3.000 euros was awarded to Simon Hoebel, TU Dresden, for his thesis on recycled thermoplastic fibres for composite components.
Marina Michel, TU Dresden, received a Sustainability Award in the category Master, worth 3.500 euros. The topic of her master thesis was the functionalisation of yarns for the filtration of micro- and nanoplastics from water.

A Promotion Prize in the category Project Work, endowed with 4.000 euros, was awarded to a student group from RWTH Aachen. The teamwork of Luis Gleissner, Leopold Habersbrunner, Frederic Olbrich and Frederik Schicks was the construction of a test rig for tests on oil-adsorbing textiles.

Felix Zerbes, RWTH Aachen, was awarded a Promotion Prize of 3.500 euros in the category Master. He developed a technical solution for air jet weaving to improve the quality of woven fabric.

Source:

VDMA e. V.

(c) Eton
22.04.2022

More localised and automated textile manufacturing with TMAS technologies

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Source:

AWOL Media

16.03.2022

TMAS: TEXO AB sees Demand for Compfelt Weaving Looms

TEXO AB, a member of TMAS, the Swedish textile machinery association, is currently seeing a surge in demand for its Compfelt weaving looms for press felt base fabrics.

“These are far from standard machines,” explains TEXO President Anders Svensson. “Off-the-shelf industrial weaving machines generally range in their working widths from 1.9 to 3.2 metres, with those purpose-built for technical applications such as geotextiles extending to wider widths of six metres and beyond. Meanwhile, one of the machines we have recently successfully delivered and commissioned has a working width of 23 metres and is not even the widest of the many such machines the company has engineered and delivered worldwide since its formation.”

A second recently-delivered line has a more modest working width – in relative terms – of 13 metres.

TEXO AB, a member of TMAS, the Swedish textile machinery association, is currently seeing a surge in demand for its Compfelt weaving looms for press felt base fabrics.

“These are far from standard machines,” explains TEXO President Anders Svensson. “Off-the-shelf industrial weaving machines generally range in their working widths from 1.9 to 3.2 metres, with those purpose-built for technical applications such as geotextiles extending to wider widths of six metres and beyond. Meanwhile, one of the machines we have recently successfully delivered and commissioned has a working width of 23 metres and is not even the widest of the many such machines the company has engineered and delivered worldwide since its formation.”

A second recently-delivered line has a more modest working width – in relative terms – of 13 metres.

Paper machines
The demand for such machines comes from the suppliers of paper machine clothing (PMC) to paper mills, who in turn operate colossal machines for paper manufacturing.
On of the largest paper making machines is currently believed to be located on Hainan Island off the southern coast of China and is 428 metres long – roughly the length of four football pitches. Naturally, such machines require equally large-scale components, which is where TEXO comes in. All paper machines require a regular supply of PMC fabrics which are employed in three separate areas of the paper machine – the forming section, the press section and the drying section.

Press felts
TEXO Compfelt weaving machines are specifically employed for the production of endless (tubular) woven base fabrics for the press section of paper machines, where water is mechanically removed from the newly formed sheet of fibres. In the simplest press, the sheet is carried by the PMC fabric between two rolls, where water is squeezed out by the application of load and pressure. This can also be assisted by the use of vacuum and heat. The PMC fabrics here need to be replaced regularly, with a maximum lifespan of six months.

Press felts have become increasingly sophisticated over the years, consisting of complex woven base structures which are subsequently combined with nonwovens via needlepunching on equally huge machines. The woven base fabrics are primarily made from polyamide for its strength and hygroscopic and elastic properties.

Dobby harness
“A major refinement of the machine has been the ability to equip it with up to 24 dobby harness frames to meet the demand for sophisticated structures from the PMC manufacturers. Although the PMC business represents a small proportion of the total cost of manufacturing paper, it can have a significant impact on the quality of the paper, the efficiency of a machine and machine production rates.”

Another significant development has been that of a self supporting base pre-filled with concrete, which has eliminated the need to dig out foundations in a plant to support the machine.

Retrofits
TEXO’s looms are built to last, but technology moves forward, and the company is also currently active in the retrofitting of existing machines built as far back as the 1970s.

Integration
TEXO has also just integrated its offices and production centre at its base in Älmhult, Sweden, to create a unified 5,000 square metre site.

Source:

TMAS / AWOL Media

(c) Swissmem
14.02.2022

Swiss textile machinery going digital: Innovative technology for new business models

Digitalization is a big story in the world of business. It’s all about change, making use of technology to transform attitudes and create new opportunities to grow revenue. At its heart is innovation, with new systems and intelligent use of data. In textiles, the entire value chain is going digital, as evidenced by the commitment of Swiss Textile Machinery Association member firms. Their story – presented here in six ‘chapters’ – spans industry sectors through spinning, weaving, finishing and nonwovens.

Digitalization is a big story in the world of business. It’s all about change, making use of technology to transform attitudes and create new opportunities to grow revenue. At its heart is innovation, with new systems and intelligent use of data. In textiles, the entire value chain is going digital, as evidenced by the commitment of Swiss Textile Machinery Association member firms. Their story – presented here in six ‘chapters’ – spans industry sectors through spinning, weaving, finishing and nonwovens.

Cost savings and more
The process of digitalization in the textile industry today is continuous – faster in some segments than others – but noticeable everywhere. Automation is promising in many areas of finishing and making-up, where initial investments are being made. An example is folding of finished goods, previously a slow manual operation. Now, high-performance automatic folding machines from Swiss company Espritech deliver the potential for cost savings, unlocking new options for positive change at this most labor-intensive stage of production. For manufacturers in low-cost areas, the benefit results from its volume and is a simple financial one. In higher-cost segments, the application of this technology can be part of a completely new business model, taking production closer to the end customer.

Better process, better workplace
Pioneering in the field of digitalization embraces social responsibility along with the introduction of bold new technological innovation. That’s a commitment made by Uster, as it aims to shape future working practices in the textile industry in areas where its systems are applied. In fabric inspection, that means combining the strengths of human capabilities with the performance of Artificial Intelligence. Automatic defect classification with machine learning technology is the next leap in digitalization for fabric manufacturers, following on from automated detection of fabric faults, which is already well established in weaving and finishing mills. This will bring benefits in profitability for the manufacturer – as well as an improved working environment for their operatives, freed from repetitive tasks.

Information, flexible and fast
Access to data is critical in the digitalized world of textiles. It must be flexible, fast and secure, and available to all levels of the company – worldwide. Jakob Muller serves the narrow fabrics industry ideally with a digitalization portal, perfectly developed to provide essential production information. The portal is a browser-based production data acquisition system, with direct access to the machine controls. The system offers unique data monitoring and communication on a global framework. Digitized weave rooms present information 24/7 on desktops at the customer’s plant, as well as on tablets and smartphones remotely.

Making the most of it
Rieter takes advantage of latest digital technology to offer customers a unique experience. Their digital spinning suite helps spinners overcome their daily challenges and manage costs and efficiency more effectively. This all-in-one mill management system connects all the machinery, giving quick access to the right information and a holistic view, from bale to yarn. Users profit from full transparency, and are presented with recommendations based on long-standing experience and know-how. This is digitalization at its most practical, applied to allow spinners to make the most of their installed machinery.

Production, service, training – digital everything
As a solutions provider, Saurer puts digitalization at the core of business, integral to its technology offering to customers. Some latest examples include self-optimization of spinning machines, and a fully automated transport of cylindrical or conical cross-wound packages. These are automatically stored in an internal buffer system, for later feeding to subsequent processes. Of course after-sales service is also digital: the e-shop and machine information hub, together with the web-based training centre, ensure that knowledge is transferred to customers – turning employees into experts.

See the future system today
Autefa Solutions uses the concept of digital twinning, visualizing any real-world concept of a nonwovens line to make it easier for potential customers to grasp the idea. It’s also a big help for training and servicing needs. Most of all they digitalize important parts e.g. of a baling press line with perfectly interconnecting software tools. This is an excellent method for reducing commissioning times. Ordered bale presses reach technical readiness in the form of a digital twin, before they are commissioned in the real world. This typically halves the total time to get the line up and running.
Speaking on behalf of Swiss Textile Machinery Association members, André Imhof, CEO of Autefa Solutions Switzerland AG, says: “Making digitalization our friend opens doors for business model innovations, which is essential for our industry competitiveness. The approach is to digitalize everything that can be digitalized. We won’t stop.”

More information:
Swissmem digital Swiss companies
Source:

Swissmem

VDMA: Top young talent with cutting-edge topics  (c) VDMA
The 2021 winners (from top left to right): Dr Martin Hengstermann, Irina Kuznik, Kai-Chieh Kuo.
10.11.2021

VDMA: Top young talent with cutting-edge topics

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

Mr Kai-Chieh Kuo was awarded the diploma/master's thesis promotion prize of 3,500 euros. With his master's thesis, which was written at RWTH Aachen University, Mr Kuo contributes to the production of vital components used in medicine. The stents made of ultra-fine yarns are made possible by an innovative modification of the classic tube weaving process.

The Walter Reiners Foundation rewarded the doctoral thesis of Dr. Martin Hengstermann with the promotional prize in the dissertation category, endowed with 5,000 euros. The thesis deals with the production of recycled carbon fibres. These can be used to produce lightweight components for motor vehicle and aircraft construction or the wind energy sector.

New Prize Sustainability / Circular Economy
The environmental conditions of the textile industry and machine construction are changing. Topics such as climate protection and the circular economy are becoming central. From this perspective, the board of the Walter Reiners Foundation has decided to further develop the foundation's prize system.

In 2022, the foundation will for the first time offer a prize with a focus on design / sustainability. Peter D. Dornier, Chairman of the Foundation, explained: "Already in the design phase, one can set the parameters so that a textile product can be reintroduced after use into the economic cycle for a high-quality application. For example, through the appropriate use of materials and finishing. We are looking for solutions for resource-saving design, technology and manufacturing processes."   

24.03.2021

NCTO: State of the U.S. Textile Industry Address

National Council of Textile Organizations (NCTO) Chairman David Roberts, who was re-elected for the 2020-2021 term, delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 17th Annual Meeting on March 24.

Mr. Roberts’s speech outlined (1) the U.S. textile industry’s heroic efforts producing PPE in the face of a once-in-a-generation pandemic (2) U.S. textile supply chain, economic, trade data, and (3) NCTO’s 2020 policy priorities for domestic textile manufacturers.

A link of his remarks as prepared for delivery are included in this press statement along with a link to a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry.

Mr. Roberts is CEO of Cap Yarns, Inc., a South Carolina specialty yarn manufacturer and a leader in developing unique yarns for the knitting and weaving industry.

National Council of Textile Organizations (NCTO) Chairman David Roberts, who was re-elected for the 2020-2021 term, delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 17th Annual Meeting on March 24.

Mr. Roberts’s speech outlined (1) the U.S. textile industry’s heroic efforts producing PPE in the face of a once-in-a-generation pandemic (2) U.S. textile supply chain, economic, trade data, and (3) NCTO’s 2020 policy priorities for domestic textile manufacturers.

A link of his remarks as prepared for delivery are included in this press statement along with a link to a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry.

Mr. Roberts is CEO of Cap Yarns, Inc., a South Carolina specialty yarn manufacturer and a leader in developing unique yarns for the knitting and weaving industry.

NCTO’s annual meeting was held virtually March 23-24.

(c) TMAS
26.04.2019

Innovate or die: TMAS at ITMA 2019

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

More information:
TMAS ITMA 2019
Source:

Issued on behalf of TMAS by AWOL Media.

21.03.2019

NCTO Elects North Carolina Manufacturing CEO as 2019 Chairman

The National Council of Textile Organizations (NCTO) held its 16th Annual Meeting March 19-21 in Washington, DC.  Elected as NCTO officers for 2019 are:

  • Chairman – Leib Oehmig, CEO of Glen Raven, Inc.
  • Mr. Oehmig is CEO of Glen Raven, Inc., based in Glen Raven, North Carolina.  Glen Raven is an innovative leader in textile research and development, dying, spinning, weaving and finishing, and distribution and logistics.
  • Vice Chairman – David Roberts, CEO of CAP Yarns, Inc.
  • Mr. Roberts is CEO of CAP Yarns, Inc., based in Clover, South Carolina.  CAP Yarns is a specialty yarn manufacturer and a leader in developing unique yarns for the knitting and weaving industry.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers.  

The National Council of Textile Organizations (NCTO) held its 16th Annual Meeting March 19-21 in Washington, DC.  Elected as NCTO officers for 2019 are:

  • Chairman – Leib Oehmig, CEO of Glen Raven, Inc.
  • Mr. Oehmig is CEO of Glen Raven, Inc., based in Glen Raven, North Carolina.  Glen Raven is an innovative leader in textile research and development, dying, spinning, weaving and finishing, and distribution and logistics.
  • Vice Chairman – David Roberts, CEO of CAP Yarns, Inc.
  • Mr. Roberts is CEO of CAP Yarns, Inc., based in Clover, South Carolina.  CAP Yarns is a specialty yarn manufacturer and a leader in developing unique yarns for the knitting and weaving industry.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers.  

  • U.S. employment in the textile supply chain was 594,147 in 2018.  
  • The value of shipments for U.S. textiles and apparel was $76.8 billion in 2018.  
  • U.S. exports of fiber, textiles and apparel were $30.1 billion in 2018.  
  • Capital expenditures for textile and apparel production totaled $2.0 billion in 2017, the last year for which data is available.

 

More information:
NCTO
Source:

NCTO

(c) VDMA Textilmaschinen
15.10.2018

VDMA: Original technology makes the difference

ITMA ASIA + CITME 2018, Asia’s foremost trade fair dedicated to textile machinery, is once again marked by a significant presence of German companies both in their number and in the quality of their technology. Visitors to the fair will have an opportunity to appreciate the high level of technology being proposed by more than 100 exhibitors from Germany, including more than 80 VDMA member companies. They cover nearly all different machinery chapters with a focus on spinning, nonwoven, weaving, knitting, warp knitting and finishing. The overall exhibition space occupied by German machinery manufacturers is more than 7,000 square meters, confirming Germany’s leading position among exhibiting foreign countries. The German exhibitors increased their booth space by approximately 15 % compared to 2016.

ITMA ASIA + CITME 2018, Asia’s foremost trade fair dedicated to textile machinery, is once again marked by a significant presence of German companies both in their number and in the quality of their technology. Visitors to the fair will have an opportunity to appreciate the high level of technology being proposed by more than 100 exhibitors from Germany, including more than 80 VDMA member companies. They cover nearly all different machinery chapters with a focus on spinning, nonwoven, weaving, knitting, warp knitting and finishing. The overall exhibition space occupied by German machinery manufacturers is more than 7,000 square meters, confirming Germany’s leading position among exhibiting foreign countries. The German exhibitors increased their booth space by approximately 15 % compared to 2016.

“Choose the original - Choose success" is the message of the VDMA Textile Machinery at this trade fair. On the occasion of the VDMA press conference on the opening day of ITMA ASIA, Ms Karin Christine Schmidt, Technical Director VDMA Textile Machinery, emphasised: “Copycat machines may look similar to the systems they are designed to emulate. But only originals do not simply follow but are pacesetters of technological progress.” Original technology is a keystone of innovation. It has the potential to successfully turn visions of entirely new possibilities in the textile production into reality.

This approach is visualised at the VDMA booth. The stand achieves attention and emotion through the picture motif: Neuschwanstein Castle. This world-famous tourist magnet is more than that: it is also a successful original. A vision, which could be successfully implemented in the long term through innovation and technology!

During the press conference, 18 spokespersons of renowned VDMA member companies showed how original technology can indeed play a major role in China’s and other Asian nation’s efforts to increase the resource efficiency of the textile industry and to interconnect information technology and manufacturing processes.  

Topics of the companies included automation, performance improvement, quality, sustainable solutions (raw material, energy, water saving), Industry 4.0 (in China called intelligent manufacturing), digital AR/VR services, platforms and software.

You are welcome to explore the speakers' statements in the atached PDF.

More information:
VDMA ITMA Asia + CITME
Source:

VDMA Textilmaschinen