From the Sector

Reset
579 results
Lenzing: Sustainable geotextiles as glacier protection and jacket (c) UN Nations
22.03.2024

Lenzing: Sustainable geotextiles as glacier protection and jacket

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The covering of a small area with the new material made from LENZING™ fibers was tested for the first time during a field test on the Stubai Glacier. Four meters of ice were saved from melting. This was confirmed in a study conducted by the University of Innsbruck and the Austrian glacier lift operators on the Stubai Glacier in Tyrol (Austria). In 2023, the pilot project was successfully extended to all Austrian glaciers used by tourists.

Last year, the project was also awarded first place in the prestigious Swiss BIO TOP Awards for wood and material innovations.

Lenzing takes this innovation project as an opportunity to inspire collaborative action towards sustainable practices and circularity in the textile value chain. Together with a network of innovative partners, Lenzing is working on processing geotextiles into new textile fibers giving them a second life as a garment. The use of geotextiles is usually limited to two years, after which the nonwovens would be disposed of. In the first phase of the pilot project, the recycling of nonwovens made for geotextiles use has been successfully tested and a fashionable “Glacier Jacket” has been produced, showcasing that the recycling of geotextiles is viable. Next to Lenzing, the network includes Marchi & Fildi Spa, a specialist in the field of mechanical recycling, the denim fabric manufacturer Candiani Denim and the fashion studio Blue of a Kind.

adidas and Yohji Yamamoto: Second Y-3 Atelier Collection (c) adidas AG
18.03.2024

adidas and Yohji Yamamoto: Second Y-3 Atelier Collection

  • adidas and Yohji Yamamoto return to present their second Y-3 Atelier collection.

For its second collection, Y-3 Atelier introduces a suite of tailored pieces which blend adidas’ performance heritage with Yohji Yamamoto’s design vision. The collection takes original Yohji Yamamoto and Yohji Yamamoto POUR HOMME designs that are from the runway show and recreates them in fully seam sealed waterproof 3-layer GORE-TEX® material constructions, while maintaining the signature silhouette of the original designs. Featuring extended seams and flap pockets, the selection of monochromatic black vests, coats, parkas, blousons, jackets, and blazers comes replete with reflective logos.

Accompanying the launch of the collection is a series of still images captured by photographer Thue Nørgaard which convey the dynamism of each piece.

  • adidas and Yohji Yamamoto return to present their second Y-3 Atelier collection.

For its second collection, Y-3 Atelier introduces a suite of tailored pieces which blend adidas’ performance heritage with Yohji Yamamoto’s design vision. The collection takes original Yohji Yamamoto and Yohji Yamamoto POUR HOMME designs that are from the runway show and recreates them in fully seam sealed waterproof 3-layer GORE-TEX® material constructions, while maintaining the signature silhouette of the original designs. Featuring extended seams and flap pockets, the selection of monochromatic black vests, coats, parkas, blousons, jackets, and blazers comes replete with reflective logos.

Accompanying the launch of the collection is a series of still images captured by photographer Thue Nørgaard which convey the dynamism of each piece.

More information:
adidas Yohji Yamamoto Y-3
Source:

adidas AG

Mahlo at IndoIntertex in Jakarta (c) Mahlo GmbH + Co. KG
15.03.2024

Mahlo at IndoIntertex in Jakarta

Mahlo GmbH + Co. KG exhibits its technologies at the upcoming IndoIntertex trade show in Jakarta. The event, scheduled from March 20 to March 23, will serve as a platform for Mahlo and its long-term partner agency Agansa to showcase its solutions tailored to meet the evolving needs of the Indonesian textile sector.

With a rich history in textile manufacturing and a skilled workforce, Indonesia has emerged as a key player in the global textile landscape. The country's strategic location, coupled with favorable government policies, has fueled the growth of its textile sector, attracting investments and fostering technological advancements.

Mahlo's participation in the IndoIntertex trade show underscores its commitment to supporting the Indonesian textile industry with solutions designed to enhance quality, efficiency, and productivity. Visitors to Mahlo's booth can expect to explore a range of offerings, including measurement and control systems, process automation solutions, and expert consultancy services.

Mahlo GmbH + Co. KG exhibits its technologies at the upcoming IndoIntertex trade show in Jakarta. The event, scheduled from March 20 to March 23, will serve as a platform for Mahlo and its long-term partner agency Agansa to showcase its solutions tailored to meet the evolving needs of the Indonesian textile sector.

With a rich history in textile manufacturing and a skilled workforce, Indonesia has emerged as a key player in the global textile landscape. The country's strategic location, coupled with favorable government policies, has fueled the growth of its textile sector, attracting investments and fostering technological advancements.

Mahlo's participation in the IndoIntertex trade show underscores its commitment to supporting the Indonesian textile industry with solutions designed to enhance quality, efficiency, and productivity. Visitors to Mahlo's booth can expect to explore a range of offerings, including measurement and control systems, process automation solutions, and expert consultancy services.

Source:

Mahlo GmbH + Co. KG

15.03.2024

ACIMIT: Italian textile machinery manufacturers at symposia in India

A new promotional initiative aims to boost trade relations between Italy and India in the textile sector. 11 Italian textile machinery manufacturers will be taking part in the forthcoming technological symposia scheduled in New Delhi and Mumbai from 9 to 12 April. The two events, organized by the Italian Trade Agency and supported by the Ministry of Foreign Affairs and International Cooperation, will allow Italian companies to showcase their technologies to a selected audience of Indian textile entrepreneurs.

The textile sector is of great significance in the Indian economy, contributing more than 2% of the GDP and allowing the Country to be among the largest exporter of textile and apparel items. Moreover India represents the third largest foreign market for the Italian textile machinery industry.

In 2022 India imported Italian textile machinery for a total value of about 200 million euro. Referring to the first 9 months of 2023, the value shows a slight decrease compared to the value for the same period of the previous year, but the forecast for the current year remains positive.

A new promotional initiative aims to boost trade relations between Italy and India in the textile sector. 11 Italian textile machinery manufacturers will be taking part in the forthcoming technological symposia scheduled in New Delhi and Mumbai from 9 to 12 April. The two events, organized by the Italian Trade Agency and supported by the Ministry of Foreign Affairs and International Cooperation, will allow Italian companies to showcase their technologies to a selected audience of Indian textile entrepreneurs.

The textile sector is of great significance in the Indian economy, contributing more than 2% of the GDP and allowing the Country to be among the largest exporter of textile and apparel items. Moreover India represents the third largest foreign market for the Italian textile machinery industry.

In 2022 India imported Italian textile machinery for a total value of about 200 million euro. Referring to the first 9 months of 2023, the value shows a slight decrease compared to the value for the same period of the previous year, but the forecast for the current year remains positive.

Italian companies participating in the symposia, all of which are ACIMIT members, are: Autefa, Cubotex, Danitech, Lafer, Mcs, Monti-Mac, Reggiani Macchine, Salvadè, Savio, Sicam, Testa.

Source:

ACIMIT - Association of Italian Textile Machinery Manufacturers

Freudenberg showcases sustainable solutions at Techtextil 2024 (c) Freudenberg Performance Materials
Freudenberg´s sustainable carrier material for green roofs on urban buildings is made from renewable resources
15.03.2024

Freudenberg showcases sustainable solutions at Techtextil 2024

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Biocarrier for green roofs
Freudenberg is showcasing a sustainable carrier material for green roofs on urban buildings at the trade fair. The carrier is made from polylactide, i.e. from renewable resources. When filled with soil, it provides a strong foothold to root systems, enabling the growth of lightweight sedum blankets that can be rolled out to provide instant green roofs. These roofs not only help counter urban heat, they also improve stormwater management and regulate indoor temperatures.

From textile waste to padding
The company extended its circular thermal wadding product range with the release of comfortemp® HO 80xR circular, a wadding made from 70 percent recycled polyamide from discarded fishing nets, carpet flooring and industrial plastic. Because polyamide 6, also known as nylon, retains its performance characteristics after multiple recycling processes, the fibers can be used again and again to manufacture performance sporting apparel, leisurewear and luxury garments.

Packaging solutions with various sustainability benefits
Freudenberg is also showcasing products for sustainable packaging and filtration solutions. The long-lasting Evolon® technical packaging series is a substitute for disposable packaging used in the transport of sensitive industrial items such as automotive parts. The material is made from up to 85 percent recycled PET. A further highlight at Techtextil are Freudenberg’s fully bio-based solutions for manufacturing dessicant bags. The binder-free material based on bio-fibers is also industrially compostable.
In addition, the experts will be giving trade fair visitors an insight into Freudenberg’s filtration portfolio.

Source:

Freudenberg Performance Materials

(c) GFA and PDS Ventures
13.03.2024

GFA and PDS Ventures: Funding programme for fashion innovation

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

As part of the Trailblazer Programme, PDS Ventures will award one innovator a significant investment of up to USD 200,000* to accelerate the company’s growth and positive impact in the fashion industry. The winner will also receive commercial and operational support from PDS Group’s Positive Materials - a textile company and strategic research partner supporting the development and acceleration of low impact textile innovation through collaboration between early-stage start-ups, supply chain partners and brands. Further scaling opportunities will be gained through access to PDS Limited’s extensive global supply chain.
 
GFA and PDS Ventures are presenting an open call for solution providers addressing different challenges across the fashion value chain to apply for the programme. Applicants will be reviewed and shortlisted by an esteemed Jury including representatives from GFA, PDS Ventures, Massachusetts Institute of Technology (MIT), Ralph Lauren Corporation, Fashion For Good and H&M Group. Eight shortlisted innovations will be enrolled in a group of Trailblazers, receiving feedback and investment pitch training from industry experts and PDS representatives.     
 
Each shortlisted innovator will then pitch for a potential investment, with the winning Trailblazer being revealed at GFA’s Global Fashion Summit: Copenhagen Edition 2024 - an international forum for sustainability in fashion, on 22-23 May at the Copenhagen Concert Hall. All shortlisted Trailblazers will also have the opportunity to showcase their businesses within an exhibit at the Summit to connect with other key industry stakeholders and potential investors.
 
The Trailblazer Programme corresponds with the theme of the upcoming Global Fashion Summit - ‘Unlocking The Next Level’. Inspired by a significant milestone, 2024 marks 15 years since the inaugural Global Fashion Summit was hosted in 2009. This pivotal anniversary offers a special moment to not only take stock of the evolution of the sector and the progress made so far, but, most importantly, look ahead at what actions must urgently be implemented in the near term, and the gaps that must be filled to accelerate industry transformation.

Source:

Global Fashion Agenda

06.03.2024

SHIMA SEIKI at FIMEC 2024 in Brazil

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

The company is showing its new SWG-XR® WHOLEGARMENT® knitting machine for the first time in Brazil. SWG-XR® features 4 needle beds and SHIMA SEIKI’s original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® products in all needles, and will be knitting WHOLEGARMENT® sportswear at FIMEC. For conventional shaped knitting, the compact SVR®093 machine with a short knitting width is specially developed for knitting shoe uppers, while the workhorse N.SSR®112 shaping machine features the latest garment knitting technology in an economical yet reliable package.
Both SVR®093 and N.SSR®112 will be knitting shoe uppers at FIMEC while utilizing the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. The classic SFG® seamless glove knitting machine will be knitting safety-oriented work gloves to round out SHIMA SEIKI’s multi-faceted display.

SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design
and simulation suited to shoe production.

More information:
Shima Seiki FIMEC shoes Brazil
Source:

SHIMA SEIKI MFG., LTD

05.03.2024

Kelheim Fibres: Trilobal fibres enable better liquid absorption

Kelheim Fibres is showcasing recent research findings at this year's Cellulose Fibres Conference (13rd-14th of March). The development, led by Dr. Ingo Bernt, Project Leader of Fibre & Application Development at Kelheim Fibres, and Dr. Thomas Harter from Graz University of Technology, provides insights into the correlation between the geometry of viscose fibres and the liquid absorption of tampons.

Kelheim Fibres has long been engaged in the functionalization of viscose fibres, including the specific adaptation of fibre cross-sections. The trilobal Galaxy® serves as an example. The current study underscores the properties of the fibre, primarily rooted in its geometry. This involves taking a closer look at the underlying mechanisms. It has been confirmed that, in contrast to the traditionally round viscose fibres and despite similar chemical compositions and mechanical properties, Galaxy® enables significantly better liquid absorption.

Kelheim Fibres is showcasing recent research findings at this year's Cellulose Fibres Conference (13rd-14th of March). The development, led by Dr. Ingo Bernt, Project Leader of Fibre & Application Development at Kelheim Fibres, and Dr. Thomas Harter from Graz University of Technology, provides insights into the correlation between the geometry of viscose fibres and the liquid absorption of tampons.

Kelheim Fibres has long been engaged in the functionalization of viscose fibres, including the specific adaptation of fibre cross-sections. The trilobal Galaxy® serves as an example. The current study underscores the properties of the fibre, primarily rooted in its geometry. This involves taking a closer look at the underlying mechanisms. It has been confirmed that, in contrast to the traditionally round viscose fibres and despite similar chemical compositions and mechanical properties, Galaxy® enables significantly better liquid absorption.

While the higher specific surface area of trilobal fibres already promotes improved liquid absorption, this is not the main factor accounting for the difference in absorption. Instead, the geometric shape of the fibres proves to be crucial. Trilobal fibres create and maintain a more voluminous, extensive network within the absorbent body, providing a larger volume for liquid absorption.

Dr. Ingo Bernt emphasizes, "The results of our study are not limited to tampons—any application requiring increased absorbency can benefit from the properties of our Galaxy® fibres."

The lecture "Geometry Matters: Unveiling Tampon Absorption Mechanisms" by Dr. Ingo Bernt und Dr. Thomas Harter takes place on the 14th of March at 2:50pm.

Source:

Kelheim Fibres GmbH

Eastman and Patagonia join forces to address textile waste (c) Eastman
28.02.2024

Textile waste: Eastman and Patagonia join forces

Eastman announces a partnership with Patagonia to address textile waste.

The outdoor apparel company teamed up with Eastman to recycle 8,000 pounds of pre- and post-consumer clothing waste, which Eastman processed through its molecular recycling technology. The process involves breaking down Patagonia’s unusable apparel into molecular building blocks that Eastman can use to make new fibers.

"We know apparel waste is a major problem, and consumers increasingly want better, more sustainable solutions when their most loved clothing reaches the end of its life," said Natalie Banakis, materials innovation engineer for Patagonia.

"Our collaborations show the world what’s possible when it comes to sustainability,” said Carolina Sister Cohn, global marketing lead for Eastman textiles. “We have the technology to make the textiles industry circular, and we know it requires collaboration with innovative brands to make circular fashion possible. This is only the beginning, and we look forward to more collaborations throughout 2024."

Eastman announces a partnership with Patagonia to address textile waste.

The outdoor apparel company teamed up with Eastman to recycle 8,000 pounds of pre- and post-consumer clothing waste, which Eastman processed through its molecular recycling technology. The process involves breaking down Patagonia’s unusable apparel into molecular building blocks that Eastman can use to make new fibers.

"We know apparel waste is a major problem, and consumers increasingly want better, more sustainable solutions when their most loved clothing reaches the end of its life," said Natalie Banakis, materials innovation engineer for Patagonia.

"Our collaborations show the world what’s possible when it comes to sustainability,” said Carolina Sister Cohn, global marketing lead for Eastman textiles. “We have the technology to make the textiles industry circular, and we know it requires collaboration with innovative brands to make circular fashion possible. This is only the beginning, and we look forward to more collaborations throughout 2024."

26.02.2024

SGL Carbon: Review of options for Business Unit Carbon Fibers

SGL Carbon SE is currently evaluating various strategic options for the Business Unit Carbon Fibers (CF). These include a possible partial or complete divestment of the Business Unit. In a first step, potential interested parties shall be approached with the general data of the Business Unit to determine their interest in an acquisition. If there is sufficient interest, a structured transaction process will be carried out in a second step. Overall, a share of sales amounting to around € 179.6 million after nine months in 2023 (9M 2022: € 269.0 million) is therefore under review. The CF sales share corresponded to 21.9% of SGL Carbon's consolidated sales after nine months in 2023 (9M 2022: 31.5%). Adjusted EBITDA of the Business Unit excluding the result from joint ventures amounted to minus € 10,9 million after nine months in 2023 (9M 2022: € 27,9 million). Despite the operating loss of CF after nine months in 2023, SGL Carbon maintains its guidance for fiscal year 2023. This shows the positive development of the three other business units and the resilience of SGL Carbon's business model.

SGL Carbon SE is currently evaluating various strategic options for the Business Unit Carbon Fibers (CF). These include a possible partial or complete divestment of the Business Unit. In a first step, potential interested parties shall be approached with the general data of the Business Unit to determine their interest in an acquisition. If there is sufficient interest, a structured transaction process will be carried out in a second step. Overall, a share of sales amounting to around € 179.6 million after nine months in 2023 (9M 2022: € 269.0 million) is therefore under review. The CF sales share corresponded to 21.9% of SGL Carbon's consolidated sales after nine months in 2023 (9M 2022: 31.5%). Adjusted EBITDA of the Business Unit excluding the result from joint ventures amounted to minus € 10,9 million after nine months in 2023 (9M 2022: € 27,9 million). Despite the operating loss of CF after nine months in 2023, SGL Carbon maintains its guidance for fiscal year 2023. This shows the positive development of the three other business units and the resilience of SGL Carbon's business model.

Carbon Fibers manufactures textile, acrylic and carbon fibers as well as composite materials at seven locations in Europe and North America. Following the temporary drop in demand for carbon fibers from the important wind industry market, the Business Unit's sales and earnings fell significantly in the course of fiscal year 2023. Due to the importance of the wind industry for the European Green Deal, SGL Carbon and many experts assumed that the wind industry recovers quickly. Unfortunately, this is currently not the case. Even if demand picks up, the company assumes that Carbon Fibers will need additional resources to remain competitive in the international market environment and to exploit market opportunities in the best possible way. Against this background, SGL Carbon is reviewing all possibilities to support a positive further development of the Carbon Fibers Business Unit.

More information:
SGL Carbon carbon fibers
Source:

SGL Carbon SE 

05.02.2024

Solvay: Educational alliance with MIT and Fermi High School

Solvay awarded a scholarship to facilitate an educational alliance between the Massachusetts Institute of Technology (MIT) and Fermi High School in Cecina. The initiative unfolded during an event held at Solvay's Rosignano site in Italy, providing a platform for students and faculty. Through this partnership, 200 Fermi High School students participated in STEM* and digital lessons from MIT's Global Teaching Labs project, emphasizing the teaching of scientific disciplines by the American university.

Beyond the scholarship award ceremony, students received a tour of Solvay's factory in Rosignano. The tour highlighted the company's dedication to safety, sustainability, and bridging the gap between academia and industry challenges. The experience illustrated the practical application of academic studies in an industrial context, showcasing Solvay's advanced control procedures, safety protocols, technological innovations, digital transformation efforts, and sustainability measures.

Solvay awarded a scholarship to facilitate an educational alliance between the Massachusetts Institute of Technology (MIT) and Fermi High School in Cecina. The initiative unfolded during an event held at Solvay's Rosignano site in Italy, providing a platform for students and faculty. Through this partnership, 200 Fermi High School students participated in STEM* and digital lessons from MIT's Global Teaching Labs project, emphasizing the teaching of scientific disciplines by the American university.

Beyond the scholarship award ceremony, students received a tour of Solvay's factory in Rosignano. The tour highlighted the company's dedication to safety, sustainability, and bridging the gap between academia and industry challenges. The experience illustrated the practical application of academic studies in an industrial context, showcasing Solvay's advanced control procedures, safety protocols, technological innovations, digital transformation efforts, and sustainability measures.

Discussions during the event included key sustainability topics such as water conservation, energy efficiency, waste management, and Solvay's commitment to promoting a balanced work-life culture and diversity within the workplace.

This collaboration aligns with Solvay's global Corporate Citizenship program. Through this program, Solvay supports individuals and communities, channeling efforts to tackle worldwide societal challenges through strategic investments in education, sustainability, and local community initiatives.

*STEM stands for science, technology, engineering and mathematics

22.01.2024

SHIMA SEIKI at Pitti Filati 94

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 94th edition of the Pitti Immagine Filati exhibition in Florence, Italy (24th-26th January 2024). It will exhibit as part of the CustomEasy section, which involves the concept of Fashion at Work and explores customization in the presence of textile machinery and design software, represented in part by SHIMA SEIKI's lineup of WHOLEGARMENT® knitting machines and APEXFiz® design software.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 94th edition of the Pitti Immagine Filati exhibition in Florence, Italy (24th-26th January 2024). It will exhibit as part of the CustomEasy section, which involves the concept of Fashion at Work and explores customization in the presence of textile machinery and design software, represented in part by SHIMA SEIKI's lineup of WHOLEGARMENT® knitting machines and APEXFiz® design software.

The new SWG-XR® flagship machine features 4 needle beds for all-needle knitting of high quality WHOLEGARMENT® products using the company's original SlideNeedle™, in addition to a re-designed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity of more than 25% over the previous MACH2®XS machine, as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit with the MACH2® series, including punch-lace patterns, variable stitch knitting and intarsia knitting. Setting new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting, SWG-XR® at Pitti Filati will be shown in 15L and 18L as well as a prototype machine in 22L.

APEXFiz® subscription-based design software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes. By replacing physical samples, virtual samples reduce time, cost and material that otherwise go to waste.

The product planning capability of APEXFiz® is enhanced by several web services featured as part of the SHIMA SEIKI Online Services (SHIMA online) web platform. These include SHIMA Datamall™ digital content web service that allows users to search, browse and purchase a variety of useful data for streamlining the planning and production of fashion items, as well as the recently renewed yarnbank® digital yarn sourcing web service that offers digitized yarn data by yarn companies from around the world for download and use in virtual sampling. SHIMANAVI® e-learning system is also part of the online platform.

Source:

SHIMA SEIKI

Avery Dennison and NRVLD showcase T-shirts with AR experience (c) Avery Dennison Corporation
22.01.2024

Avery Dennison and NRVLD showcase T-shirts with AR experience

Avery Dennison, a leader in materials science and digital identifications solutions, has completed a project with NRVLD, a community-based agency comprising artists, technologists and media personalities who are passionate about disruptive innovation.

Avery Dennison created limited edition augmented reality T-shirts worn by the NRVLD Executive Team during ‘NRVLD’, an immersive event held during Art Basel Miami Beach in December 2023.

The 30 T-shirts were digitally connected via heat transfers featuring a QR code and image recognition. Visitors were transported to an immersive artwork metaverse, built by ARkivist. In addition to the AR experience, each garment was personalized with the wearer's contact details embedded in the NFC woven patch on the chest, providing a connection point for guests throughout the event. Both connected garment experiences were powered by Avery Dennison’s atma.io connected product cloud.

Avery Dennison, a leader in materials science and digital identifications solutions, has completed a project with NRVLD, a community-based agency comprising artists, technologists and media personalities who are passionate about disruptive innovation.

Avery Dennison created limited edition augmented reality T-shirts worn by the NRVLD Executive Team during ‘NRVLD’, an immersive event held during Art Basel Miami Beach in December 2023.

The 30 T-shirts were digitally connected via heat transfers featuring a QR code and image recognition. Visitors were transported to an immersive artwork metaverse, built by ARkivist. In addition to the AR experience, each garment was personalized with the wearer's contact details embedded in the NFC woven patch on the chest, providing a connection point for guests throughout the event. Both connected garment experiences were powered by Avery Dennison’s atma.io connected product cloud.

Avery Dennison will be showcasing this project at NRF 2024: Retail’s Big Show, from January 14-16 at the Javits Convention Center in New York. The connected T-shirts will feature alongside a host of apparel digital solutions for supply chain visibility, product tracking, and consumer engagement.

Michael Colarossi, vice president, innovation, product line management and sustainability, Apparel Solutions, Avery Dennison comments: “The trajectory of consumer experiences unmistakably leans towards digital, and brands are actively seeking innovative methods to engage consumers by merging traditional craftsmanship with digital creativity. In this scenario, AR acted as the conduit, and Avery Dennison's connected garment technology and on-garment Embelex branding turned that vision into tangible reality."

Pavan Bahl, founder of Bellwether Culture and co-founder NRVLD, comments: "In the Web3 sphere, blockchain technology enables ownership of digital goods and identity. Our collaboration with Avery Dennison showcases the potential of bridging this gap, illustrating the exciting possibilities in this space."

Source:

Avery Dennison Corporation

19.01.2024

Mahlo joins forces with Brückner Textile Technologies at Colombiatex

Mahlo GmbH + Co. KG will participate in the Colombiatex textile show, held in Medellin from 23 to 25 January. This year, Mahlo will be joining forces with Brückner Textile Technologies to present their solutions for the textile production sector at their joint booth.

Both companies appreciate the power of Colombia’s textile industry. Textile is one of the most important industrial sectors in the Latin American country with an export value of clothing of more than 600 million US dollars. The United States are also the main export destination for apparel products. At Colombiatex 2024, Mahlo's Head of Sales, Thomas Höpfl, will be present to share insights and discuss how Mahlo’s innovative technologies can address the specific challenges faced by Colombian textile manufacturers. Sustainability of process efficiency being among the most pressing ones.

Mahlo GmbH + Co. KG will participate in the Colombiatex textile show, held in Medellin from 23 to 25 January. This year, Mahlo will be joining forces with Brückner Textile Technologies to present their solutions for the textile production sector at their joint booth.

Both companies appreciate the power of Colombia’s textile industry. Textile is one of the most important industrial sectors in the Latin American country with an export value of clothing of more than 600 million US dollars. The United States are also the main export destination for apparel products. At Colombiatex 2024, Mahlo's Head of Sales, Thomas Höpfl, will be present to share insights and discuss how Mahlo’s innovative technologies can address the specific challenges faced by Colombian textile manufacturers. Sustainability of process efficiency being among the most pressing ones.

Archroma showcases Super Systems+ at Colombiatex 2024 Photo: Archroma
19.01.2024

Archroma showcases Super Systems+ at Colombiatex 2024

Archroma is showcasing its planet conscious innovations and solution systems at this year’s Colombiatex de Las Américas, being held from January 23 to 25, 2024.

Archroma is using its attendance at Colombiatex 2024 to introduce a new concept that promises to help the region’s brands and mills optimize their productivity, add value to their products and create a positive impact on the environment: Super Systems+.

The Super Systems+ solutions offer great performance, including end-product durability, while meeting sustainability targets with cleaner chemistries that comply with current and anticipated industry regulations or deliver resource savings, or both. Solutions are currently available for popular end-use segments, from denim to cotton and poly-cotton knits.

Archroma is showcasing its planet conscious innovations and solution systems at this year’s Colombiatex de Las Américas, being held from January 23 to 25, 2024.

Archroma is using its attendance at Colombiatex 2024 to introduce a new concept that promises to help the region’s brands and mills optimize their productivity, add value to their products and create a positive impact on the environment: Super Systems+.

The Super Systems+ solutions offer great performance, including end-product durability, while meeting sustainability targets with cleaner chemistries that comply with current and anticipated industry regulations or deliver resource savings, or both. Solutions are currently available for popular end-use segments, from denim to cotton and poly-cotton knits.

For black denim with a cleaner environmental footprint, brands and mills can choose DIRESUL® EVOLUTION BLACK to create unique shade and wash-down effects with an overall impact reduction of 57% compared to standard Sulfur Black 1 liquid.* For authentic blue denim, Archroma’s aniline-free** pre-reduced DENISOL® PURE INDIGO 30 LIQ produces coveted indigo colors with the same performance and efficiency as conventional indigo dye, but in a more planet-friendly way.

To embrace circularity and create natural shades on cellulosic-based fibers including cotton, kapok, linen and viscose, brand owners can now turn to Archroma’s patented EarthColors® technology. It makes high-performance biosynthetic dyes from non-edible natural waste, such as almond shells, bitter orange residues and cotton production byproducts, helping conserve natural resources. For next-generation processing of polyester and its blends, Archroma’s ERIOPON® E3-SAVE all-in-one auxiliary combines pre-scouring, dyeing and reduction clearing in a single bath to achieve substantial savings of water, energy and time.

For weather protection and stain resistance that is both economically and environmentally sustainable, Archroma Super Systems+ draw on an extensive portfolio of fluorine-free durable water repellents.

* Ecotarrae lifecycle analysis
** Below limits of detection according to industry standard test methods

Source:

Archroma

17.01.2024

Everfield acquires Swedish software specialist for commercial laundry industry

Software group Everfield has acquired the Swedish software reseller “SoCom Scandinavia AB” (SoCom Scandinavia). The previously independent reseller is now a subsidiary of German “SoCom Informationssysteme GmbH” (SoCom), which Everfield acquired early 2023. SoCom Scandinavia distributes SoCom’s ERP system for the commercial laundry industry in Scandinavia. SoCom is among Europe’s leading providers in this segment and with this acquisition is further expanding its market position in the Nordic countries.

Software group Everfield has acquired the Swedish software reseller “SoCom Scandinavia AB” (SoCom Scandinavia). The previously independent reseller is now a subsidiary of German “SoCom Informationssysteme GmbH” (SoCom), which Everfield acquired early 2023. SoCom Scandinavia distributes SoCom’s ERP system for the commercial laundry industry in Scandinavia. SoCom is among Europe’s leading providers in this segment and with this acquisition is further expanding its market position in the Nordic countries.

“By acquiring SoCom Scandinavia, we have successfully completed the first so-called bolt-on acquisition for one of our portfolio companies”, says Oscar Koberling, Acquisitions Manager at Everfield. In a bolt-on acquisition, the company being purchased is integrated into an existing portfolio company. “We focus on long-term sustainable growth and work closely with the management of our portfolio companies to identify the right targets”, Koberling highlights. “With the addition of SoCom Scandinavia, SoCom can now further strengthen the sales and support in this region and thereby continue to foster growth in Scandinavia.” With its Enterprise Resource Planning (ERP) software “TIKOS”, the German software developer SoCom from Krumbach enables laundries of any scale to achieve end-to-end process management.

SoCom Scandinavia distributes the “TIKOS” laundry software in Sweden, Finland, Norway, Denmark and Iceland. The company was founded in 2017 by the sole shareholder Anna Johansson, in close cooperation with the German SoCom Informationssysteme GmbH. “I myself come from the commercial laundry industry and was therefore able to convince myself of the performance and flexibility of the TIKOS software in practice”, says Anna Johansson. “Our success in the past years shows that many laundries in Scandinavia share this assessment. In the future, we will work even more closely with our German colleagues to further expand our market share in the region.”

Johansson and her team will continue to be available to customers at the existing location. “Since establishing SoCom Scandinavia, Anna and her team have already won and supported a plethora of well-known clients for our software”, emphasizes SoCom’s CEO Michael Wieser. “By integrating SoCom Scandinavia, we can streamline our processes even further. Our main goal remains to offer the best possible service to our clients.”

With its steadily growing software and service portfolio, SoCom has been operating in the laundry industry for over thirty years and is a market leader in the German-speaking region. In total, SoCom’s products are used in over 350 laundries across 17 countries.

More information:
Everfield SoCom laundry Software
Source:

möller pr GmbH

Devan high cooling Photo: Devan Chemicals
09.01.2024

Devan Chemicals presents latest sustainable textile finishes at Heimtextil 2024

Devan will showcase the newest additions to their R-Vital NTL Range and Thermic High Cooling technology.

R-Vital® NTL enables textile manufacturers to boost their textiles with a range of active, natural ingredients that have a positive effect on the body and mind. Elements such as Chamomile oil and Arnica Montana are absorbed by the skin and have relaxing, moisturizing or hydrating effects. The biobased content of the R-Vital well-being technology is +97%, readily biodegradable (OECD 301B).

R-Vital® NTL Regenight™: Devan and Lucas Meyer Cosmetics join forces to launch a ground-breaking technology, R-Vital NTL Regenight™, a technology which improves sleep quality and also improves nighttime skin recovery. Using an upcycled oil soluble fraction obtained from Australian Tea tree oil distillation process, Regenight™ acts through both inhalation to improve nighttime rest and through topical action to provide skin recovery.

Tested in real-life context using proven biometric technology, the dual action provided individually by Regenight™ proposes a breakthrough approach to reduce the impact of poor-quality sleep on the skin.

Devan will showcase the newest additions to their R-Vital NTL Range and Thermic High Cooling technology.

R-Vital® NTL enables textile manufacturers to boost their textiles with a range of active, natural ingredients that have a positive effect on the body and mind. Elements such as Chamomile oil and Arnica Montana are absorbed by the skin and have relaxing, moisturizing or hydrating effects. The biobased content of the R-Vital well-being technology is +97%, readily biodegradable (OECD 301B).

R-Vital® NTL Regenight™: Devan and Lucas Meyer Cosmetics join forces to launch a ground-breaking technology, R-Vital NTL Regenight™, a technology which improves sleep quality and also improves nighttime skin recovery. Using an upcycled oil soluble fraction obtained from Australian Tea tree oil distillation process, Regenight™ acts through both inhalation to improve nighttime rest and through topical action to provide skin recovery.

Tested in real-life context using proven biometric technology, the dual action provided individually by Regenight™ proposes a breakthrough approach to reduce the impact of poor-quality sleep on the skin.

R-Vital® NTL Chamomile oil: Chamomile oil is known for its moisturizing and soothing properties. Additionally, this oil is believed to have antioxidant and inflammatory properties. Furthermore, chamomile oil is renowned for its calming effects and potential to reduce stress and anxiety, helping improve sleep quality.

R-Vital® NTL Warming: Engineered to deliver a gentle warmth, the R-Vital NTL Warming technology ensures a cozy and comfortable sleeping experience. This blend is a solution that infuses a sense of warmth, promoting physical and emotional well-being.

R-Vital NTL Arnica Montana: Harnessing the natural benefits of Arnica Montana, this ingredient, is celebrated for its potent healing and recovering properties.

At Heimtextil Devan will also present a new high cooling technology that provides an optimal and refreshing sleeping climate, ensuring a cool and restful night's sleep. Thermic High Cooling is based on reactive microencapsulated Phase Change Materials (PCMs). The smart heat exchange mechanism keeps the body within its comfort zone. This makes the body suffer less from night sweats, and results in a longer, healthier and more comfortable sleep with fewer awakenings. This new formulation with high cooling level and high solid content, presents around 30% more cooling than standard PCM formulations. One padding allows to achieve high cooling level (no need to run multiple applications). A Bio-based version is also available - Thermic® Bio, where the PCMs are derived from sustainable, natural sources.

Source:

Devan Chemicals

snowfield-bulky-down-jacket-icicle Photo ALLIED Feather + Down
28.12.2023

Down Apparel for the European Market

ALLIED Feather + Down, global leaders in high performance, ethically sourced down, and MN Inter-Fashion, manufacturers of high performance luxury outerwear, announced that the ALLIED Feather + Down outerwear collection will be available to the European market.  

Originally released only in Japan, the exclusive collection will be available to select European boutique retailers for the fall 2024 season. Limited to a few hundred pieces, this line will showcase the breadth of ALLIED’s down offering, from their industry-leading ExpeDRY down insulation to their exceedingly high performance 1000 fill power down. It will also include MN Inter-Fashion’s experience delivering quality design and craftsmanship to some of the best known fashion houses in the world.

Designed, cut, and sewn by MN Inter-Fashion in Japan using materials from ALLIED and Pertex, the jackets shall represent a collision between cutting edge fashion aesthetics and materials normally reserved for highly technical outerwear. The result is a unique garment with a sophisticated urban look blended with performance that rivals the most technical outdoor apparel available. 

ALLIED Feather + Down, global leaders in high performance, ethically sourced down, and MN Inter-Fashion, manufacturers of high performance luxury outerwear, announced that the ALLIED Feather + Down outerwear collection will be available to the European market.  

Originally released only in Japan, the exclusive collection will be available to select European boutique retailers for the fall 2024 season. Limited to a few hundred pieces, this line will showcase the breadth of ALLIED’s down offering, from their industry-leading ExpeDRY down insulation to their exceedingly high performance 1000 fill power down. It will also include MN Inter-Fashion’s experience delivering quality design and craftsmanship to some of the best known fashion houses in the world.

Designed, cut, and sewn by MN Inter-Fashion in Japan using materials from ALLIED and Pertex, the jackets shall represent a collision between cutting edge fashion aesthetics and materials normally reserved for highly technical outerwear. The result is a unique garment with a sophisticated urban look blended with performance that rivals the most technical outdoor apparel available. 

Source:

ALLIED Feather + Down

VEOCEL™ showcased LENZING™ Lyocell Dry fiber (c) Lenzing Group
18.12.2023

VEOCEL™ showcased LENZING™ Lyocell Dry fiber

With the growing demand among brands and consumers for plastic-free materials and ingredient transparency, VEOCEL™, the flagship specialty nonwovens brand of Lenzing Group, showcased LENZING™ Lyocell Dry fiber at Hygienix 2023. LENZING™ Lyocell Dry fiber which is not classified as “plastic” according to EU SUPD, meets the growing interest for plastic-free nonwoven products across the industry and among consumers. Additionally, along with being an environment-friendly solution, the fiber delivers high-performance dryness and comfort which makes it the optimum fiber choice for absorbent hygiene applications.

Comprised of mostly fossil-based materials, absorbent hygiene products are an essential part of many consumers’ daily lives. With heightened concerns towards environmental impact, the product segment has been undergoing a change caused by shifting consumer preferences, increased consciousness and concerns towards plastic waste, and technology advancement. LENZING™ Lyocell Dry fiber has embraced these changes without compromising on quality or performance.

With the growing demand among brands and consumers for plastic-free materials and ingredient transparency, VEOCEL™, the flagship specialty nonwovens brand of Lenzing Group, showcased LENZING™ Lyocell Dry fiber at Hygienix 2023. LENZING™ Lyocell Dry fiber which is not classified as “plastic” according to EU SUPD, meets the growing interest for plastic-free nonwoven products across the industry and among consumers. Additionally, along with being an environment-friendly solution, the fiber delivers high-performance dryness and comfort which makes it the optimum fiber choice for absorbent hygiene applications.

Comprised of mostly fossil-based materials, absorbent hygiene products are an essential part of many consumers’ daily lives. With heightened concerns towards environmental impact, the product segment has been undergoing a change caused by shifting consumer preferences, increased consciousness and concerns towards plastic waste, and technology advancement. LENZING™ Lyocell Dry fiber has embraced these changes without compromising on quality or performance.

LENZING™ Lyocell Dry is a cellulosic environment-friendly wood-based alternative to fossil-based fibers. Besides offering great performance features such as liquid management, dryness, gentle-on-the-skin comfort, softness, and quality, LENZING™ Lyocell Dry helps to meet the needs of customers who are aiming to produce plastic-free applications or end products that do not harm the planet without compromising on performance or comfort.

Featuring Lenzing’s unique Dry technology, LENZING™ Lyocell Dry’s hydrophobic characteristics and liquid-controlling properties make it the ideal fiber for absorbent hygiene products. Its high-performing hydrophobicity makes it the optimal choice for a wide range of applications, including baby diapers, feminine care and personal hygiene products as well as adult incontinence products.

The fiber has consistently been tested by Lenzing as the softest* fiber among cellulosic fibers in both dry and wet stages. LENZING™ Lyocell Dry will enable brands and manufacturers to deliver quality hygiene products that provide a high level of comfort, softness, and dryness.

*Lenzing AG softness panel test

Source:

Lenzing Group

11.12.2023

GOTS Pilot Project for Small Operators to attain Certification

In an initiative aimed at enhancing accessibility to certification for small operator groups within the organic textile value chain, the Global Organic Textile Standard (GOTS) is pleased to introduce its ongoing Controlled Supply Chain Scheme Pilot Project. The project, launched in 2022, was strategically developed to overcome the obstacles that often deter small-scale operators from pursuing GOTS certification.

Recognising that administrative complexities and financial burdens can impede these operators, the controlled supply chain scheme (CSCS) system was developed to mitigate these challenges. The supply chain requires an internal control and audit system, and small-scale operations benefit from a streamlined ‘group’ certification process, which reduces costs and eases administrative barriers.

In an initiative aimed at enhancing accessibility to certification for small operator groups within the organic textile value chain, the Global Organic Textile Standard (GOTS) is pleased to introduce its ongoing Controlled Supply Chain Scheme Pilot Project. The project, launched in 2022, was strategically developed to overcome the obstacles that often deter small-scale operators from pursuing GOTS certification.

Recognising that administrative complexities and financial burdens can impede these operators, the controlled supply chain scheme (CSCS) system was developed to mitigate these challenges. The supply chain requires an internal control and audit system, and small-scale operations benefit from a streamlined ‘group’ certification process, which reduces costs and eases administrative barriers.

Under the CSCS framework, a supply chain comprised of a minimum of eight and a maximum of thirty small-scale facilities, each with twenty or fewer workers, could be considered a single Certified Entity after a comprehensive risk assessment by their Certification Body (CB). SANKEI MERIYASU, a Japanese textile manufacturer, recently received GOTS certification through this project. SANKEI MERIYASU's success showcases the tangible impact of the CSCS system in empowering small-scale operators.

With the pilot due to be reviewed and evaluated next year, GOTS Managing Director Rahul Bhajekar is optimistic about the future of CSCS systems within GOTS. "The controlled supply chain scheme has the potential for substantial impact, empowering small operators in the organic textile supply chain and revolutionising GOTS certification. Our pilot project is proving that the scheme works as intended, overcoming barriers and expanding opportunities. We look forward to refining and validating the CSCS requirements, in hopes of implementing it fully for all markets in the future.”

More information:
GOTS certification
Source:

GOTS - Global Organic Textile Standard