From the Sector

Reset
7 results
22.02.2023

Rieter: First information on the financial year 2022

  • Sales of CHF 890.3 million in second half-year 2022
  • EBIT margin of around 2% expected for full year 2022
  • Order intake of CHF 1 157.3 million in 2022; order backlog of around CHF 1 540 million as of December 31, 2022
  • Preparations for ITMA 2023 on schedule
  • Implementation of action plan to increase sales and profitability ongoing
  • Rieter site sales process on schedule

For Rieter, in addition to the geopolitical uncertainties, the 2022 financial year was characterized by three main challenges:
Due to the rapid rise in inflation, the exceptionally high order backlog of around CHF 1 840 million at the beginning of 2022 was processed at significantly higher costs. It was only possible to offset these higher costs in part by means of price increases and other remedial measures.

In order to safeguard deliveries, it was necessary to compensate for serious material bottlenecks, particularly in electronic components, which resulted in considerable additional development expenditure.

  • Sales of CHF 890.3 million in second half-year 2022
  • EBIT margin of around 2% expected for full year 2022
  • Order intake of CHF 1 157.3 million in 2022; order backlog of around CHF 1 540 million as of December 31, 2022
  • Preparations for ITMA 2023 on schedule
  • Implementation of action plan to increase sales and profitability ongoing
  • Rieter site sales process on schedule

For Rieter, in addition to the geopolitical uncertainties, the 2022 financial year was characterized by three main challenges:
Due to the rapid rise in inflation, the exceptionally high order backlog of around CHF 1 840 million at the beginning of 2022 was processed at significantly higher costs. It was only possible to offset these higher costs in part by means of price increases and other remedial measures.

In order to safeguard deliveries, it was necessary to compensate for serious material bottlenecks, particularly in electronic components, which resulted in considerable additional development expenditure.

Major expenses were also incurred in connection with the acquired businesses (Accotex, Temco and Winder).

Sales
The realization of sales from the exceptionally high order backlog developed better than expected. With sales of CHF 1 510.9 million, Rieter achieved an increase of 56% compared with the previous year (2021: CHF 969.2 million). In the second half of 2022, especially in the fourth quarter, the measures introduced to address material bottlenecks had a positive impact. Consequently, sales increased to CHF 890.3 million compared with the first six months (first half-year 2022: CHF 620.6 million).

EBIT margin
The trend in the EBIT margin was strongly influenced by substantial cost increases, which could only be offset in part through price increases and other remedial measures. In addition, to compensate for material shortages, expenses were incurred in connection with the development of alternative solutions and the acquired businesses.

Rieter succeeded in improving profitability compared with the first half of 2022 due to the higher sales volume and offsetting measures to compensate for increased costs, and expects a positive EBIT margin of around 2% for the full year 2022 (2021: 4.9%).

Order intake
In line with expectations, the order intake of CHF 1 157.3 million in 2022 was below the record year of 2021 (CHF 2 225.7 million). The market situation is characterized by investment restraint due to geopolitical uncertainties, higher financing costs and consumer reticence in important markets.

Order backlog
The company had an order backlog of around CHF 1 540 million at the end of 2022, which thus extends well into 2023 and 2024. In 2022, Rieter recorded order cancellations of less than 10% of the order backlog of CHF 1 840 million at the beginning of the year.

Preparations for ITMA 2023 on schedule
Rieter has continued to boost its innovative capability and, in order to further extend its technology leadership, will present new innovative solutions at ITMA 2023 in Milan.

Action plan to increase sales and profitability
Implementation of the action plan to increase sales and profitability is ongoing. With regard to the profitability of the order backlog, which remains high, the implemented price increases in combination with a favorable trend in costs, particularly in logistics, are having an impact. In addition, progress was made in eliminating material bottlenecks and reducing expenses for the three acquired businesses.

Rieter site sales process
The sales process for the remaining land at the Rieter site in Winterthur (Switzerland) is proceeding according to plan. In total, around 75 000 m2 of land will be sold. The Rieter CAMPUS is not part of this transaction.

Results press conference 2023
Rieter will provide further details on the 2022 financial year and an outlook for the 2023 financial year on March 9, 2023.

More information:
Rieter financial year 2022
Source:

Rieter Holding AG

(c) Rieter
Autoconer X6
31.10.2022

Rieter at India ITME 2022

Rieter is presenting the latest innovations in its systems, components and services at the upcoming India ITME 2022 in Uttar Pradesh (India), taking place from December 8 – 13, 2022.

Autoconer X6
The automatic winding machine Autoconer X6 completes the Rieter ring and compact-spinning systems. The machine serves as the final quality assurance in the ring and compact-spinning process and is key to the performance of the subsequent process stages. The Multilink system with Multilot offers maximum flexibility to handle a different type of yarn.

The latest splicer generation OZ1 and OZ2 provides an optimum splice quality based on an open prism. With only two prisms spinning mills can splice the entire spectrum of cotton yarns as well as blends. They are also used for the splicing of cotton-based elastic core yarns in combination with the Elastosplicer. The splice zone exhibits an impressive elasticity in the fabric.

Rieter is presenting the latest innovations in its systems, components and services at the upcoming India ITME 2022 in Uttar Pradesh (India), taking place from December 8 – 13, 2022.

Autoconer X6
The automatic winding machine Autoconer X6 completes the Rieter ring and compact-spinning systems. The machine serves as the final quality assurance in the ring and compact-spinning process and is key to the performance of the subsequent process stages. The Multilink system with Multilot offers maximum flexibility to handle a different type of yarn.

The latest splicer generation OZ1 and OZ2 provides an optimum splice quality based on an open prism. With only two prisms spinning mills can splice the entire spectrum of cotton yarns as well as blends. They are also used for the splicing of cotton-based elastic core yarns in combination with the Elastosplicer. The splice zone exhibits an impressive elasticity in the fabric.

Compacting Solutions
The Rieter compacting devices include the COMPACTapron, COMPACTeasy and COMPACTdrum. Spinning mills can change quickly between ring and compact yarn and offer customers a broader product range.

Recycling Expertise from Rotor to Ring
Rieter offers solutions for the integration of recycled raw material into yarn production to help close the textile loop and make fashion more circular. Both rotor and ring yarns can be produced with a considerable amount of mechanically recycled fibers.

ESSENTIALorder
Based on existing customer information, the webshop ESSENTIALorder visualizes which Rieter machines andn systems are available inside each spinning mill. It therefore offers a personalized shopping experience and facilitates order management, enabling spinning mills to optimize their internal stock levels.

ROBOspin
The piecing robot ROBOspin reduces personnel requirements in the ring spinning section by 50%. The robot also attains productivity increases thanks to higher spindle speeds at equal or higher efficiency.

SSM NEO-FD
SSM is presenting NEO-FD, the assembly-winding machine for precision wound packages for twisting. It meets all requirements for efficient production. The machine features the auto-doffing option and the online back-pressure system for low and high package densities.

Temco CoolFlow Disc
Temco’s CoolFlow texturing discs offer longer lifetime thanks to a brand-new geometry and the latest polyurethane technology. The texturing discs now generate a disc surface that operates at a lower temperature, resulting in slower ageing and abrasion. Further benefits are more stable yarn quality, higher productivity, and an overall process cost reduction.

26.05.2022

Rieter anticipates losses in the first half of 2022

  • Exceptionally high order backlog and sustained strong demand
  • Supply chain bottlenecks, COVID lockdown in China and significant cost increases
  • Takeover of winding machine business leads to additional costs
  • Sales and earnings adversely impacted in first half-year
  • Considerably improved market position

Despite an exceptionally high order backlog and sustained strong demand, Rieter’s business situation in the first half of 2022 is characterized by the well-known supply chain bottlenecks, the repercussions of the COVID lockdown in China and the significant increases in material and transportation costs.

Further costs are added in connection with the takeover of the automatic winding business as of April 1, 2022.

These factors are adversely impacting both sales and earnings.

  • Exceptionally high order backlog and sustained strong demand
  • Supply chain bottlenecks, COVID lockdown in China and significant cost increases
  • Takeover of winding machine business leads to additional costs
  • Sales and earnings adversely impacted in first half-year
  • Considerably improved market position

Despite an exceptionally high order backlog and sustained strong demand, Rieter’s business situation in the first half of 2022 is characterized by the well-known supply chain bottlenecks, the repercussions of the COVID lockdown in China and the significant increases in material and transportation costs.

Further costs are added in connection with the takeover of the automatic winding business as of April 1, 2022.

These factors are adversely impacting both sales and earnings.

Rieter expects significantly higher sales in the first half of 2022 compared to the prior-year period (first half of 2021: CHF 400.5 million). Rieter anticipates a loss at the EBIT and net result level in the first half of 2022 (first half of 2021: EBIT CHF 9.0 million, net result: CHF 5.3 million).
The company is working intensively on the implementation of measures to minimize the impact of the supply chain bottlenecks, the COVID lockdown in China and the cost increases. The implemented price increases have a delayed effect, particularly in the machinery business. The integration of the automatic winding business is proceeding according to plan.

As soon as the situation in the sourcing markets has normalized, Rieter expects to benefit from the exceptionally high order backlog and the considerably improved market position as a result of the takeover of the automatic winding business as well as Accotex and Temco.
Rieter will provide a detailed report on the business results of the first half of 2022 in July 2022.

Source:

Rieter Management AG

01.04.2022

Rieter completes acquisition of the three Saurer businesses

With the takeover of the automatic winding machine business at the Uebach-Palenberg/Germany site with effect from April 1, 2022, Rieter has completed the acquisition of the three businesses from Saurer.

The acquisition of the automatic winding technology in the premium category completes Rieter’s ring and compact-spinning system and thus lays the foundation to further improve the company’s position in the staple fiber market segment.

The components businesses Accotex (elastomer technology for spinning machines) at the Muenster/Germany site and Temco (technology components for filament machines) at the Hammelburg/Germany site had already been acquired by Rieter as of December 1, 2021.

Rieter had announced the acquisition of the three businesses on August 16, 2021.

In total, the three businesses generated sales of EUR 142 million in 2020, the year of the COVID crisis. In 2019 and 2018, total sales amounted to EUR 235 million and EUR 260 million, respectively.

With the takeover of the automatic winding machine business at the Uebach-Palenberg/Germany site with effect from April 1, 2022, Rieter has completed the acquisition of the three businesses from Saurer.

The acquisition of the automatic winding technology in the premium category completes Rieter’s ring and compact-spinning system and thus lays the foundation to further improve the company’s position in the staple fiber market segment.

The components businesses Accotex (elastomer technology for spinning machines) at the Muenster/Germany site and Temco (technology components for filament machines) at the Hammelburg/Germany site had already been acquired by Rieter as of December 1, 2021.

Rieter had announced the acquisition of the three businesses on August 16, 2021.

In total, the three businesses generated sales of EUR 142 million in 2020, the year of the COVID crisis. In 2019 and 2018, total sales amounted to EUR 235 million and EUR 260 million, respectively.

The winding machine business with new machines will be assigned to the Business Group Machines & Systems, and the after-sales business will be assigned to the Business Group After Sales. The Accotex and Temco component businesses are managed by the Business Group Components.

Source:

Rieter Management AG

09.03.2022

Financial Year 2021

  • Order intake of CHF 2 225.7 million at record level
  • Sales of CHF 969.2 million despite bottlenecks in the supply chains
  • EBIT margin of 4.9% and net profit of 3.3% of sales
  • Milestones achieved in strategy implementation
  • Dividend of CHF 4.00 per share proposed
  • Outlook

The 2021 financial year was characterized by a rapid market recovery. As market and technology leader, Rieter succeeded in this environment in posting a record order intake, significantly increased sales compared with the previous year despite the bottlenecks in the supply chains, and generated an EBIT margin of 4.9%. This success is based on the investments in innovation and competitiveness of Rieter in recent years. Crisis management in the 2020 pandemic year, which aimed at benefiting from the expected market recovery after the pandemic, was also a contributing factor. With the acquisition of three businesses from the Saurer Group, a further milestone in the implementation of the strategy has been achieved.

  • Order intake of CHF 2 225.7 million at record level
  • Sales of CHF 969.2 million despite bottlenecks in the supply chains
  • EBIT margin of 4.9% and net profit of 3.3% of sales
  • Milestones achieved in strategy implementation
  • Dividend of CHF 4.00 per share proposed
  • Outlook

The 2021 financial year was characterized by a rapid market recovery. As market and technology leader, Rieter succeeded in this environment in posting a record order intake, significantly increased sales compared with the previous year despite the bottlenecks in the supply chains, and generated an EBIT margin of 4.9%. This success is based on the investments in innovation and competitiveness of Rieter in recent years. Crisis management in the 2020 pandemic year, which aimed at benefiting from the expected market recovery after the pandemic, was also a contributing factor. With the acquisition of three businesses from the Saurer Group, a further milestone in the implementation of the strategy has been achieved. The acquisition strengthens Rieter’s market position by completing the ring and compact-spinning system. With the laying of the foundation stone for the Rieter CAMPUS in September 2021, an important prerequisite for the expansion of the company’s technology leadership has been created.

Order Intake and Sales
At the end of 2021, the company had an order backlog of around CHF 1 840 million (December 31, 2020: around CHF 560 million). Rieter closed the 2021 financial year with sales of CHF 969.2 million, which corresponds to an increase of 69% compared to the previous year (2020: CHF 573.0 million).

EBIT, Net Profit and Free Cash Flow
The profit at the EBIT level in the 2021 financial year was CHF 47.6 million, which represents 4.9% of sales. At the net profit level, a profit of CHF 31.7 million accrued, which corresponds to 3.3% in relation to sales. Free cash flow at CHF 128.1 million is a result of the positive developments in earnings and net working capital. The acquisition of three businesses from the Saurer Group for a purchase price of CHF 321.4 million resulted in net debt of CHF 161.9 million; as of December 31, 2020, net liquidity amounted to CHF 41.3 million. At December 31, 2021, liquid funds amounted to CHF 249.4 million (2020: CHF 283.2 million). The equity ratio as of December 31, 2021, was 27.6% (previous year’s reporting date: 36.4%).

Sales by Region
Sales increased in all regions, with the exception of Africa. The highest growth of CHF 126.0 million compared to CHF 50.8 million in the previous year was achieved in India, followed by North and South America with CHF 149.9 million in 2021 compared to CHF 66.4 million in the previous period, and the Asian countries excluding China, India and Turkey with CHF 318.7 million (2020: CHF 184.8 million). In Turkey, Rieter increased sales to CHF 182.3 million (2020: CHF 122.0 million), in China to CHF 135.3 million (2020: CHF 92.8 million) and in Europe to 43.3 million (2020: CHF 38.4 million). In Africa, sales were below the prior-year level at CHF 13.7 million (2020: CHF 17.8 million).

Business Groups
Despite the well-known challenges in the supply chain, the Business Group Machines & Systems posted an order intake of CHF 1 708.6 million (2020: CHF 363.9 million) and achieved sales of CHF 590.3 million, double the previous year’s figure (2020: CHF 295.8 million). Ring and compact-spinning systems, on whose customer benefits Rieter has worked intensively in recent years, were particularly in demand.
The order intake of the Business Group Components was CHF 296.0 million, 75% above the previous year’s level (2020: CHF 169.1 million). Against the backdrop of successful strategy implementation and good capacity utilization at spinning mills worldwide, sales increased to CHF 231.5 million (2020: CHF 174.3 million). The Business Group After Sales recorded an order intake of CHF 221.1 million, 106% higher than the previous year (2020: CHF 107.2 million). Sales reached a level of CHF 147.4 million (2020: CHF 102.9 million). The positive evolution of the Business Group After Sales was also significantly influenced by successful strategy implementation and good capacity utilization at spinning mills around the world.

Acquisition of three Saurer businesses
Effective from December 1, 2021, Rieter is consolidating the components businesses acquired from Saurer. With the acquisition of Accotex (elastomer components for spinning machines) and Temco (bearing solutions for filament machines), Rieter is strengthening its market position in the components business. The acquisition of the third business from Saurer (automatic winder) completes and thus considerably increases the attractiveness of Rieter’s ring and compact-spinning system. This acquisition marks an important milestone in the implementation of the company’s strategy as an innovative systems supplier. The transaction is expected to be finalized in the first half of 2022.

Rieter CAMPUS
On September 8, 2021, at the Winterthur location, the foundation stone was laid for the Rieter CAMPUS, which includes a customer and technology center as well as an administration building. With the Rieter CAMPUS, the company is creating a state-of-the-art and creative working environment, ensuring access to cutting-edge European technology and enhancing its ability to attract young talent. Thus, the Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position.

Dividend
In view of the profit of CHF 31.7 million at the net profit level in the 2021 financial year, the Board of Directors proposes to the shareholders for 2021 the distribution of a dividend of CHF 4.00 per share. This corresponds to a payout ratio of 57%.

Changes to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding AG appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.

Board of Directors and Annual General Meeting
At the 130th Annual General Meeting held on April 15, 2021, the shareholders approved all motions proposed by the Board of Directors. The Chairman of the Board Bernhard Jucker and the Directors This E. Schneider, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for a further one-year term of office. Stefaan Haspeslagh was newly elected to the Board of Directors for a one-year term of office. This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Changes to the Board of Directors
The two members of the Board of Directors, Luc Tack and Stefaan Haspeslagh, resigned from Rieter’s Board of Directors with effect from August 30, 2021.

Outlook
Rieter anticipates a gradual normalization of the demand for new systems in the coming months. The company expects demand for wear and spare parts to remain at a good level due to high capacity utilization at spinning mills. For the full year 2022, due to the high order backlog and the consolidation of the businesses acquired from Saurer, Rieter anticipates sales of around CHF 1 500 million. Sales in the second half of 2022 are expected to be higher than in the first half of the year. The realization of sales from the order backlog continues to be associated with risks in relation to the well-known bottlenecks in the supply chains, the ongoing pandemic and the geopolitical uncertainties. Despite the price increases already implemented, the rise in global costs poses a risk to the development of profitability.

Source:

Rieter Holding AG

26.01.2022

Rieter: First information on the financial year 2021

  • Order Intake of CHF 2 225.7 Million in Financial Year 2021
  • Sales of CHF 969.2 million in financial year 2021
  • Implementation of the acquisition of the three Saurer businesses on schedule
  • EBIT margin of 4.5% to 5% of sales expected in financial year 2021

Due to the continuing high demand for new installations, components and services, Rieter posted an order intake of CHF 551.8 million in the fourth quarter of 2021. As a result, Rieter achieved a total order intake of CHF 2 225.7 million in the 2021 financial year (2020: CHF 640.2 million).

  • Order Intake of CHF 2 225.7 Million in Financial Year 2021
  • Sales of CHF 969.2 million in financial year 2021
  • Implementation of the acquisition of the three Saurer businesses on schedule
  • EBIT margin of 4.5% to 5% of sales expected in financial year 2021

Due to the continuing high demand for new installations, components and services, Rieter posted an order intake of CHF 551.8 million in the fourth quarter of 2021. As a result, Rieter achieved a total order intake of CHF 2 225.7 million in the 2021 financial year (2020: CHF 640.2 million).

The exceptionally high order intake is broadly supported at the global level. As reported previously, this is based on a catch-up effect from the two prior years and a regional shift in demand. Rieter believes that a major reason for this shift in demand is the development of costs in China. The orders came primarily from Turkey, India, Latin America, Uzbekistan, China and Pakistan. At the end of 2021, the company had an order backlog of around CHF 1 840 million (December 31, 2020: around CHF 560 million). Despite bottlenecks in material supplies and freight capacities, sales performance up to the end of the year was better than expected. The Rieter Group closed the 2021 financial year with sales of CHF 969.2 million (2020: CHF 573.0 million).

Implementation of the Acquisition of the Three Saurer Businesses
Effective from December 1, 2021, Rieter is consolidating the components businesses Accotex and Temco acquired from Saurer. With the acquisition of Accotex (elastomer components for spinning machines) and Temco (bearing solutions for filament machines), Rieter is strengthening the market position in the components business. The figures from the two businesses have been incorporated into the results for the 2021 financial year as follows: the 2021 order intake includes CHF 2.1 million and the 2021 sales includes CHF 3.3 million. The two businesses contributed a total of around CHF 27 million to the order backlog at the end of 2021. The acquisition of Saurer’s third business (automatic winder) leads to a significant increase in the attractiveness of Rieter’s ring and compact-spinning systems and is expected to be completed in the first half of 2022. Accordingly, order intake and sales are not included in the figures for the 2021 financial year.

EBIT Margin
Rieter anticipates an EBIT margin of 4.5% to 5% of sales in the 2021 financial year (2020: -14.7%).
Rieter will publish the full annual financial statements and the 2021 Annual Report on March 9, 2022.

Order Intake by Business Group
Thanks to the company’s innovative product portfolio and global positioning, all three Business Groups benefited from the high level of demand.
The Business Group Machines & Systems posted an order intake of CHF 1 708.6 million (2020: CHF 363.9 million). The main focus of demand was on ring and compact-spinning systems.
The order intake of the Business Group Components was CHF 296.0 million, an increase of 75% compared to the previous year (2020: CHF 169.1 million). The Business Group After Sales recorded an order intake of CHF 221.1 million, 106% higher than the previous year (2020: CHF 107.2 million). The main reason for the positive order intake in both Business Groups is the continuing increased demand for spare and wear parts in spinning mills, which are operating at high capacity.

Sales by Business Group
Despite the challenges in the supply chain announced earlier, the Business Group Machines & Systems achieved sales of CHF 590.3 million, double the previous year’s figure (2020: CHF 295.8 million). Sales of the Business Group Components increased to CHF 231.5 million (2020: CHF 174.3 million). The Business Group After Sales achieved sales of CHF 147.4 million (2020: CHF 102.9 million).

Sales by Region
Sales increased in all regions, with the exception of the region Africa. The highest year-on-year growth of 148% was achieved in India, followed by North and South America (+126%) and the Asian countries (+72%), excluding China, India and Turkey.

Rieter will issue an outlook for the 2022 financial year at the Results Press Conference on March 9, 2022.

Source:

Rieter Holding AG

16.08.2021

Rieter Acquires Three Businesses from Saurer

  • Schlafhorst automatic winder as well as Accotex and Temco will be transferred from Saurer to Rieter
  • Investment to complete Rieter’s ring- and compact spinning systems and in two attractive component businesses
  • Closing expected during the month of August, implementation to be completed in six to nine months

On August 13, 2021, Rieter Holding Ltd., Winterthur/Switzerland, and Saurer Intelligent Technology Co. Ltd., Shanghai/China listed, signed an agreement by which Rieter will acquire three businesses from Saurer Netherlands Machinery Company B.V., Amsterdam/Netherlands, the parent company of Saurer Spinning Solutions GmbH & Co. KG, Uebach-Palenberg/Germany and Saurer Technologies GmbH & Co. KG, Krefeld/Germany.

With this acquisition, Rieter will complete the offering of ring- and compact spinning systems by acquiring the Schlafhorst automatic winder business. Additionally, Rieter invests in two attractive component businesses: Accotex (elastomer components for spinning machines) and Temco (bearing solutions for filament machines).

  • Schlafhorst automatic winder as well as Accotex and Temco will be transferred from Saurer to Rieter
  • Investment to complete Rieter’s ring- and compact spinning systems and in two attractive component businesses
  • Closing expected during the month of August, implementation to be completed in six to nine months

On August 13, 2021, Rieter Holding Ltd., Winterthur/Switzerland, and Saurer Intelligent Technology Co. Ltd., Shanghai/China listed, signed an agreement by which Rieter will acquire three businesses from Saurer Netherlands Machinery Company B.V., Amsterdam/Netherlands, the parent company of Saurer Spinning Solutions GmbH & Co. KG, Uebach-Palenberg/Germany and Saurer Technologies GmbH & Co. KG, Krefeld/Germany.

With this acquisition, Rieter will complete the offering of ring- and compact spinning systems by acquiring the Schlafhorst automatic winder business. Additionally, Rieter invests in two attractive component businesses: Accotex (elastomer components for spinning machines) and Temco (bearing solutions for filament machines).

In total, the three businesses had a combined turnover of EUR 142 million in 2020, the year of the COVID crisis. In 2019 and 2018, the total combined turnover was at a level of EUR 235 million and EUR 260 million, respectively.

The purchase price for the three businesses is EUR 300 million on a cash and debt free basis. Rieter has financed the purchase price by cash and available credit lines.

Rieter and Saurer expect to close the transaction during the month of August. In the first step of the transaction, Rieter will acquire 57% of the shares of Saurer Netherlands. The shares will be returned to Saurer after the implementation of the transaction in six to nine months.

In connection with the transaction, it is envisaged that Rieter will supply automatic winders to Saurer in the future.

Source:

Rieter Management AG