From the Sector

Reset
58 results
(c) GFA and PDS Ventures
13.03.2024

GFA and PDS Ventures: Funding programme for fashion innovation

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

As part of the Trailblazer Programme, PDS Ventures will award one innovator a significant investment of up to USD 200,000* to accelerate the company’s growth and positive impact in the fashion industry. The winner will also receive commercial and operational support from PDS Group’s Positive Materials - a textile company and strategic research partner supporting the development and acceleration of low impact textile innovation through collaboration between early-stage start-ups, supply chain partners and brands. Further scaling opportunities will be gained through access to PDS Limited’s extensive global supply chain.
 
GFA and PDS Ventures are presenting an open call for solution providers addressing different challenges across the fashion value chain to apply for the programme. Applicants will be reviewed and shortlisted by an esteemed Jury including representatives from GFA, PDS Ventures, Massachusetts Institute of Technology (MIT), Ralph Lauren Corporation, Fashion For Good and H&M Group. Eight shortlisted innovations will be enrolled in a group of Trailblazers, receiving feedback and investment pitch training from industry experts and PDS representatives.     
 
Each shortlisted innovator will then pitch for a potential investment, with the winning Trailblazer being revealed at GFA’s Global Fashion Summit: Copenhagen Edition 2024 - an international forum for sustainability in fashion, on 22-23 May at the Copenhagen Concert Hall. All shortlisted Trailblazers will also have the opportunity to showcase their businesses within an exhibit at the Summit to connect with other key industry stakeholders and potential investors.
 
The Trailblazer Programme corresponds with the theme of the upcoming Global Fashion Summit - ‘Unlocking The Next Level’. Inspired by a significant milestone, 2024 marks 15 years since the inaugural Global Fashion Summit was hosted in 2009. This pivotal anniversary offers a special moment to not only take stock of the evolution of the sector and the progress made so far, but, most importantly, look ahead at what actions must urgently be implemented in the near term, and the gaps that must be filled to accelerate industry transformation.

Source:

Global Fashion Agenda

Gerhard Lettl (AVK Board Member, C.F. Maier Europlast GmbH & Co. KG), Felix Pohlmeyer (ITA), Prof. Dr Jens Ridzewski (AVK Board Member, IMA Materialforschung und Anwendungstechnik GmbH), Tim Röding (ITA), from left to right © AVK
Gerhard Lettl (AVK Board Member, C.F. Maier Europlast GmbH & Co. KG), Felix Pohlmeyer (ITA), Prof. Dr Jens Ridzewski (AVK Board Member, IMA Materialforschung und Anwendungstechnik GmbH), Tim Röding (ITA), from left to right
23.11.2023

CarboScreen: Sensor monitoring for complex carbon fibre production

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

The production of carbon fibres is highly complex. In the current state of the art, however, the manufacturing process is only monitored manually by semi-skilled workers. However, even minimal fibre damage during production leads to a reduction in the quality of the carbon fibre. In extreme cases, it can also lead to plant fires. To ensure production quality, the production speed is currently limited to a maximum of 15 m/min. In fact, the production speed of the systems could be higher. The sensor-based online monitoring of Carbo-Screen makes it possible to increase the production speed to 30 m/min in the medium term. As a result of the increased production volume per system, the specific production costs of the carbon fibre are reduced, which can result in lower prices.

A reduced sales price would make it possible to use carbon fibres and their composite materials even more widely in traditional markets such as aerospace technology and wind energy, as well as for mass production in the automotive industry.

The CarboScreen online monitoring system is currently being developed for industrial use. It is to be validated at an industrial plant in 2024. CarboScreen GmbH was founded as part of EXIST funding and offers AI-supported sensor systems for carbon fibre production. The sensor technology continuously monitors the fibre throughout the entire production process. Deviations are detected automatically.

The winners of the AVK Innovation Award are honoured annually by the AVK Industrievereinigung Verstärkte Kunststoffe. Companies, institutes and their partners are honoured in three categories: products and applications, processes and procedures, and research and science.

03.11.2023

Solvay announces Board of Directors for standalone SYENSQO

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

The following individuals will serve on the SYENSQO Board of Directors:
Rosemary Thorne will serve as independent Director and Chair of the SYENSQO Board, as well as Chair of the Board’s Finance Committee. She is currently an Independent Director on the Solvay Board of Directors, appointed in 2014, and Chair of the Board’s Audit Committee. She is also an Independent Director on the Board of Merrill Lynch International (UK), a wholly-owned subsidiary of Bank of America, serving as Chair of the Audit Committee. Ms. Thorne has decades of financial leadership experience across a wide range of industries. She previously served as Chief Financial Officer at J. Sainsbury, the UK’s largest supermarket chain at the time; Bradford & Bingley; and Ladbrokes. Ms. Thorne previously sat as an Independent Director on the Boards of Royal Mail Group, Cadbury Schweppes, Santander UK, First Global Trust Bank and Smurfit Kappa Group.

Dr. Ilham Kadri will serve as Chief Executive Officer and member of the Board of Directors of SYENSQO. She is currently CEO and President of the Executive Committee at Solvay. Ms. Kadri has successfully led the turnaround of Solvay, delivering double-digit EBITDA growth and 18 consecutive quarters of positive free cash flow, deleveraging the balance sheet and promoting superior people engagement. She is an independent Board member at A.O. Smith and L’Oréal. She is active in non-profit organizations, as Chair of the World Business Council for Sustainable Development (WBCSD), member of the steering committee of the European Round Table of Industrialists (ERT) as well as a permanent member of the World Economic Forum’s International Business Council (WEF). Ms. Kadri has extensive leadership experience across a variety of industries in four continents and with leading industrial multinationals, including Shell, UCB, Huntsman, Dow, Sealed Air. Prior to Solvay, she was CEO and President of Diversey in the USA, led the company’s return to profitability and resulting spin off and divestiture to Bain Capital. She founded two non-Profit foundations: the Solvay Solidarity Fund in Belgium in 2020 which supported more than 7000 families affected by Covid-19 and natural disasters; and founded the ISSA Hygieia Network in 2015 in the USA, to help women in the cleaning industry. She received two Doctor Honoris Clausa from EWHA University in Korea and Université de Namur in Belgium.

Julian Waldron will serve as independent Director and Chair of the Audit Committee. He currently serves as Deputy Executive Chairman of privately-held Albea Group, a global beauty and personal care packaging company which operates 35 facilities in Europe, Asia and the Americas. Mr. Waldron has held senior leadership roles at several leading listed companies in the industrial, technology and services sectors and brings a wealth of expertise in finance and business operations. Prior to joining Albea in 2022, he was Chief Financial Officer of Suez for three years after serving as Chief Financial Officer and subsequently Chief Operating Officer of Technip. He started his career at UBS Warburg where he spent 14 years. Mr. Waldron also served as an independent Board member and Chairman of finance, risk and investments at Carbon Clean, a privately-owned carbon capture company dedicated to achieving net zero.

Heike Van de Kerkhof will serve as independent Director and Chair of the Nomination Committee. She currently sits on the Board of OCI N.V.. Ms. Van de Kerkhof brings more than 30 years of experience in the chemicals, oil & gas and materials industries, having served in numerous leadership roles around the globe. From 2020 to 2023, she was Chief Executive Officer of Archroma Management, a global specialty chemicals company. During her tenure, she successfully completed the transformational acquisition of Huntsman’s Textile Effects business. Prior to her role at Archroma, Ms. Van de Kerkhof served as Vice President of Lubricants, Western Hemisphere at BP, and held positions at Castrol, The Chemours Company, and Neste Corporation. She also held many leading roles within DuPont over 18 years.

Matti Lievonen will serve as independent Director and Chair of the Compensation Committee. He is currently an independent director on the Solvay Board, appointed in 2017. Mr. Lievonen is a proven executive in the energy, forestry, power and automation industries with an extensive track record of leading businesses through climate transition. For over ten years until 2018, he served as Chairman and Chief Executive Officer of Neste Corporation, a global leader in next-generation renewable fuels and chemicals. During his time at Neste, Mr. Lievonen successfully promoted the development of clean fuels as well as Finland’s bioeconomy strategy in advancing renewable transportation fuels. He has also been involved with organizations such as Fortum Board, SSAB, Nynäs AB, Ilmarinen, and the HE Finnish Fair Foundation. Until 2021, Mr. Lievonen was also Chairman of the Board of Directors at Fortum. He has been recognized for his admirable leadership and expertise, and in 2016 was awarded an Honorary Doctorate of Technology by the Aalto University Schools of Technology.

Dr. Françoise de Viron will serve as non-independent Director, Chair of the ESG Committee and Vice-Chair of the Board. She is currently a director of the Solvay Board, appointed in 2013. Ms. de Viron is a regarded academic leader and has extensive experience in innovation, R&D and qualitative research. She is a Professor Emeritus at the Faculty of Psychology and Education Sciences and Louvain School of Management at UCLouvain in Belgium where she has been an Academic Member of various groups at UCLouvain. Ms. de Viron previously served as the president of AISBL EUCEN – the European Universities Continuing Education Network. Prior to her university position, from 1985 to 2000, she was in charge of developing Artificial Intelligence applications at Tractebel S.A. (now Tractebel-Engie).

Roeland Baan will serve as independent Director. He currently serves as President and Chief Executive Officer of Topsoe, a privately-held leading provider of clean energy and petrochemical technologies. He is also Chairman of the Supervisory Board of SBM Offshore NV. Roeland Baan has extensive experience in supply chain management, M&A, business development and operations management. Prior to joining Topsoe in 2020, he was President and CEO of Outokumpu and has held several executive roles at global organizations such as Aleris International, ArcelorMittal and SHV NV. He spent over 16 years in various roles across the globe at Shell, living in South America, in Africa and in the United Kingdom.

Edouard Janssen will serve as non-independent Director. He is currently a Director on the Solvay Board, appointed in 2021. Earlier this year, he was appointed Chief Financial Officer of D’Ieteren Group, a European leader in automotive distribution services. Mr. Janssen is also a Board member of privately-held Financière de Tubize and Union Financière Boël, as well as Co-Founder and Chair of Trusted Family. Mr. Janssen is active in academics, as Vice-Chair of the International Advisory Board of the Solvay Brussels School of Economics and Management and on the advisory board of the INSEAD HGIBS. He brings expertise in finance, strategy, entrepreneurship, business management, planning and marketing. He has served as Solvay’s Vice President in strategy and M&A between 2019 and 2021, and prior to that, he was the US-based General Manager for North- and Latin America at Solvay’s Aroma Performance Global Business Unit.
 
Dr. Mary Meaney will serve as non-independent Director. She is currently a member of the Board of Directors and of the Audit Committee of Groupe Bruxelles Lambert SA. She also sits on the Board of Directors and the Remuneration Committee of Beamery, the privately-held talent management company. She is a member of the Board of Directors and of the Finance Committee of Imperial College, London.Dr. Meaney will bring expertise in Strategy, M&A, and change management, which she acquired over a 24-year career at McKinsey. She was a Senior Partner, served on the McKinsey Shareholders Council and led McKinsey’s global Organization practice.

Nadine Leslie will serve as independent Director and is based in the United States of America. She is currently a member of the Board of Directors of Provident Financial Services , as well as a Non-Executive Director of Seven Seas Water Corporation, a water and wastewater treatment multinational company. She also sits on the Board of Trustees of Hackensack Meridian Health Network and is active as strategic consultant for civil engineering firm T&M Associates. Over a 22-year career at Suez, Ms. Leslie held several leadership positions, the last one being Chief Executive Officer of Suez North America, until 2022. Previously she served as Executive Vice President Health & Safety.

More information:
Solvay Board of Directors
Source:

Solvay

FET’s stand at ITMA 2023, Milan Photo Fibre Extrusion Technology
FET’s stand at ITMA 2023, Milan
08.08.2023

FET completes sequence of exhibitions for 2023

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has completed an international series of exhibitions, culminating in a very successful ITMA 2023, the world’s largest international textile and garment technology exhibition, which took place in Milan, Italy in June.

 “This was a very hectic period for FET, organising participation in three exhibitions in Europe and Asia over a period of less than four months” commented FET’s Managing Director Richard Slack. “However, this provides a great opportunity for smaller specialist companies like FET to raise our profile on the international stage, showing what we can offer, alongside major corporations. Being able to meet so many customers face-to-face, post pandemic also indicates a welcome return to normal business relationships.”

Prior to this was INDEX 23 in April, the world’s leading nonwovens exhibition in Geneva. The exhibition season began earlier in the year with the “Green Textile and Innovation Technology Forum and Exhibition” in Hong Kong, taking a small booth to support the event and FET’s official agent in the region, Chemtax.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has completed an international series of exhibitions, culminating in a very successful ITMA 2023, the world’s largest international textile and garment technology exhibition, which took place in Milan, Italy in June.

 “This was a very hectic period for FET, organising participation in three exhibitions in Europe and Asia over a period of less than four months” commented FET’s Managing Director Richard Slack. “However, this provides a great opportunity for smaller specialist companies like FET to raise our profile on the international stage, showing what we can offer, alongside major corporations. Being able to meet so many customers face-to-face, post pandemic also indicates a welcome return to normal business relationships.”

Prior to this was INDEX 23 in April, the world’s leading nonwovens exhibition in Geneva. The exhibition season began earlier in the year with the “Green Textile and Innovation Technology Forum and Exhibition” in Hong Kong, taking a small booth to support the event and FET’s official agent in the region, Chemtax.

FET designs, develops and manufactures extrusion equipment for a wide range of high value textile material applications worldwide and the variety of these three exhibitions illustrates FET’s scope in the industry.

More information:
Fibre Extrusion Technology
Source:

Fibre Extrusion Technology

RadiciGroup at Phygital Sustainability Expo photo: Phygital Sustainability Expo/RadiciGroup
07.07.2023

RadiciGroup at Phygital Sustainability Expo presenting Biofeel® eleven

RadiciGroup took part in the Phygital Sustainability Expo, this year in its fourth edition, which was held in Rome on 5 and 6 July. This event is entirely dedicated to the ecological transition of fashion and design brands through technological innovation. The show is an important platform for discussion on sustainable transition issues, involving Italian and international brands, fashion tech start-ups, representatives from the institutional, business and educational fields, and consumers.

RadiciGroup took part in the Phygital Sustainability Expo, this year in its fourth edition, which was held in Rome on 5 and 6 July. This event is entirely dedicated to the ecological transition of fashion and design brands through technological innovation. The show is an important platform for discussion on sustainable transition issues, involving Italian and international brands, fashion tech start-ups, representatives from the institutional, business and educational fields, and consumers.

RadiciGroup's participation in the event was further evidence of the Group's commitment to making a contribution to sustainability and circularity in the fashion and textile industry, in collaboration with all the other players in the supply chain. During the narrated fashion show, held on the evening of Wednesday, 5 July, in the evocative archaeological complex of the Imperial Forum Museum, RadiciGroup presented a maxi dress made of Biofeel® eleven, a yarn of completely natural origin featuring high technical, aesthetic and environmental performance. This yarn is produced starting from a small bean cultivated in India on semi-arid land and thus does not compete with human food production. These beans yield a special oil ideal for obtaining biopolymers, such as the one produced by Arkema and spun into yarn at RadiciGroup in Italy.

The dress is not only made from a low environmental impact raw material, but is also an example of ecodesign: the garment was realized on a Shima Seiki WholeGarment knitting machine, where the entire item was knit directly from spools of Biofeel® eleven yarn, bypassing the traditional stages of weaving and tailoring. It is a zero-waste process, as only the quantity of yarn strictly needed for the garment is used.

Biofeel® eleven yarn endows the dress with unique characteristics, including low moisture absorption, greater lightness and high resistance and durability. Besides being 100% biobased, the yarn is also 100% recyclable because it is made of a mono-material polymer, which facilitates its end-of-life recycling and processing into new materials suitable for any application requiring high performance.

29.06.2023

Global Fashion Summit in Copenhagen: Ambition to Action

Leaders assembled at the renowned forum for sustainability in fashion to mobilise action and usher in a transformative phase for the industry.

Hosted in the Copenhagen Concert Hall, on 27-28 June, Global Fashion Summit convened over 1000 revered representatives from brands, retailers, NGOs, policy, manufacturers, and innovators to transform ambition into action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry, under the patronage of HRH The Crown Princess of Denmark.

This year’s theme ‘Ambition to Action’, galvanised participants to transform ambitions into concrete actions that can drive the industry towards more sustainable practices, both socially and environmentally. Under this premise, the event presented content experiences focused on tangible and evidence-based impact, with over half of the programme dedicated to educational and action-oriented business case studies.

Leaders assembled at the renowned forum for sustainability in fashion to mobilise action and usher in a transformative phase for the industry.

Hosted in the Copenhagen Concert Hall, on 27-28 June, Global Fashion Summit convened over 1000 revered representatives from brands, retailers, NGOs, policy, manufacturers, and innovators to transform ambition into action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry, under the patronage of HRH The Crown Princess of Denmark.

This year’s theme ‘Ambition to Action’, galvanised participants to transform ambitions into concrete actions that can drive the industry towards more sustainable practices, both socially and environmentally. Under this premise, the event presented content experiences focused on tangible and evidence-based impact, with over half of the programme dedicated to educational and action-oriented business case studies.

This edition included more speakers and content than ever before, with the dynamic and action-orientated sessions spanning across four different stages. The Summit also facilitated more than 10 strategic roundtable meetings that brought together executives and policy makers for productive dialogues on how to address pressing sustainability issues and act accordingly. The content integrated the five priorities of the Fashion CEO Agenda, alongside critical challenges and tangible opportunities relating to some of the key forces that are shaping the fashion industry today: data, policy and storytelling.

Attendees heard from 137 speakers including HRH The Crown Princess of Denmark; Antoine Arnault, Image & Environment, LVMH Group; Jonathan Anderson, Creative Director & Founder, JW Anderson and Creative Director, Loewe; Virginijus Sinkevičius,  Commissioner for the Environment, Oceans and Fisheries, European Commission; Henriette Hallberg Thygesen, Chief Delivery Officer, Maersk; Aude Vergne, Chief Sustainability Officer, Chloé; Nicolaj Reffstrup, Founder, GANNI; Fanny Moizant, Co-Founder & President, Vestiaire Collective; Noel Kinder, Chief Sustainability Officer, Nike; Óscar García Maceiras, CEO, Inditex; Dr. Lewis Akenji, Managing Director, Hot or Cool Institute; Rachel Arthur, Advocacy Lead, Sustainable Fashion, United Nations Environment Programme; and many more.

Innovation Forum connected fashion companies with sustainable solution providers
This year’s Summit also presented an Innovation Forum, enabling small and large companies to meet with 26 sustainable solution providers – equipping them with the concrete tools to quickly turn words into meaningful actions. More than 350 facilitated business meetings between fashion companies and sustainable solution providers took place during the Summit.

Global Fashion Summit: Boston Edition will take place on 27 September 2023, which will mark the second time the Summit has been hosted outside of Copenhagen in its 14-year history.

Source:

Global Fashion Agenda

(c) FET
FET’s show booth at the Hong Kong exhibition
19.04.2023

FET supports Green Textile Exhibition in Hong Kong

Fibre Extrusion Technology Ltd (FET) of Leeds, UK participated in the “Green Textile and Innovation Technology Forum and Exhibition” in Hong Kong, taking a small booth to support the event and FET’s official agent in the region, Chemtax. This was the first in a series of international exhibitions that FET will be attending in 2023.

The interactive exhibition was organised by the Hong Kong General Chambers of Textiles, with over 20 industrial experts and 300 guests in discussion forums and meetings. The major themes explored were sustainable solutions, new technologies and future trends in green textiles. The region is committed to improved sustainability in textiles, with China in particular setting ambitious targets for high performance fibre self-sufficiency, developments in biodegradable material and increased production capacity in recycled fibre.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK participated in the “Green Textile and Innovation Technology Forum and Exhibition” in Hong Kong, taking a small booth to support the event and FET’s official agent in the region, Chemtax. This was the first in a series of international exhibitions that FET will be attending in 2023.

The interactive exhibition was organised by the Hong Kong General Chambers of Textiles, with over 20 industrial experts and 300 guests in discussion forums and meetings. The major themes explored were sustainable solutions, new technologies and future trends in green textiles. The region is committed to improved sustainability in textiles, with China in particular setting ambitious targets for high performance fibre self-sufficiency, developments in biodegradable material and increased production capacity in recycled fibre.

This fits perfectly with FET’s ethos, having long been a leading exponent of sustainability in fibre technology. The FET range of laboratory and pilot Melt Spinning extrusion lines is suited for both process and end product development of sustainable materials, enabling customers to undertake process development in-house. All FET systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability.

Source:

Fibre Extrusion Technology Ltd (FET)

(c) Global Fashion Agenda
17.02.2023

Global Fashion Summit: Copenhagen Edition 2023 takes place in June

Global Fashion Summit, a leading international forum for sustainability in fashion, will convene core stakeholders across the fashion ecosystem and parallel industries to drive tangible action on social and environmental sustainability. The Summit is presented by Global Fashion Agenda (GFA). GFA is a non-profit organisation that is accelerating the transition to a net positive fashion industry, under the patronage of HRH The Crown Princess of Denmark. Global Fashion Summit: Copenhagen Edition 2023 will take place on 27-28 June in Copenhagen, Denmark.

The theme of Global Fashion Summit: Copenhagen Edition 2023 is ‘Ambition to Action’. Under this premise, the Summit will present content experiences focused on tangible impact.

Global Fashion Summit, a leading international forum for sustainability in fashion, will convene core stakeholders across the fashion ecosystem and parallel industries to drive tangible action on social and environmental sustainability. The Summit is presented by Global Fashion Agenda (GFA). GFA is a non-profit organisation that is accelerating the transition to a net positive fashion industry, under the patronage of HRH The Crown Princess of Denmark. Global Fashion Summit: Copenhagen Edition 2023 will take place on 27-28 June in Copenhagen, Denmark.

The theme of Global Fashion Summit: Copenhagen Edition 2023 is ‘Ambition to Action’. Under this premise, the Summit will present content experiences focused on tangible impact.

The theme will underly all elements of the Summit and Main Stage speakers will showcase inspiring thought leadership for accelerated change by exploring a matrix of interconnected topics. The 2023 Copenhagen Edition will build on more than a decade’s worth of Summit guidance and outcomes by dedicating even more focus towards action-oriented workshops and case studies. Through these formats, the forum will demonstrate tangible learnings and concrete recommendations that can help drive implementation.
 
The forum will also host strategic roundtable meetings with the aim to mobilise industry leaders to build alliances with solution providers, policy makers, investors and other industry stakeholders and implement immediate solutions. Such alliances can set in motion progress towards a net positive industry. With upcoming policy expected to influence the fashion industry even further this year, the Summit will shed light on the ongoing pieces of legislation currently under discussion both within the EU and worldwide.

This year’s Global Fashion Summit: Copenhagen Edition is supported by Principal Sponsor, Maersk. A globally renowned leader in logistics that aims to deliver a more connected, agile and sustainable future for global logistics. Maersk will support the Summit's agenda to accelerate industry transformation by highlighting how logistics can help the fashion and lifestyle industry in reaching their sustainability goals.

Additionally, the Innovation Forum will present a curated exhibition of other leading sustainable solutions. Summit attendees can meet with exhibitors covering the entire value chain – from innovative materials to end-of-use solutions. Innovation Forum Matchmaking will enable small and large fashion businesses to advance their sustainability journey, by providing the unique opportunity to be matched with relevant solution providers. 

03.02.2023

Sustainable Apparel Coalition partners with Bangladesh Apparel Exchange

The Sustainable Apparel Coalition (SAC), an independent and impact-creating organization that brings together around half of the apparel industry to enable positive social and environmental impact at scale, announces its strategic partnership with the Bangladesh Apparel Exchange (BAE) for its fourth edition of the Sustainable Apparel Forum. The event aims to bring together stakeholders to discuss and exchange ideas on how to advance sustainability within the textile and apparel industry.

Taking place on March 15 and 16, 2023, this year’s Sustainable Apparel Forum will focus on five key subject areas of the apparel and textile supply chain: circular economy, climate impact & action, renewable energy & green funding, skill development and green job prospects & challenges. Delegates in attendance will include, garment manufacturers, brands and retailers, development partners, foreign missions and embassies in Bangladesh, impact creating organizations, apparel and textile associations, industry leaders, government officials, secretariats and ministers.

The Sustainable Apparel Coalition (SAC), an independent and impact-creating organization that brings together around half of the apparel industry to enable positive social and environmental impact at scale, announces its strategic partnership with the Bangladesh Apparel Exchange (BAE) for its fourth edition of the Sustainable Apparel Forum. The event aims to bring together stakeholders to discuss and exchange ideas on how to advance sustainability within the textile and apparel industry.

Taking place on March 15 and 16, 2023, this year’s Sustainable Apparel Forum will focus on five key subject areas of the apparel and textile supply chain: circular economy, climate impact & action, renewable energy & green funding, skill development and green job prospects & challenges. Delegates in attendance will include, garment manufacturers, brands and retailers, development partners, foreign missions and embassies in Bangladesh, impact creating organizations, apparel and textile associations, industry leaders, government officials, secretariats and ministers.

The first day of the forum will be geared towards roundtable discussions and workshop sessions on circularity, while day two, the main conference day of the event, will feature panel discussions, presentations & keynote speeches along with strategic guidelines from government officials and industry leaders.

Vidhura Rapanawe, Board Director, Andrew Martin, VP, Membership and Stakeholder Engagement, and Joyce Tsoi, Director of Collective Action Programs, along with other team members, will represent the SAC, including participation in a discussion on decarbonization and what it will take for the industry to achieve the necessary reduction of carbon emissions. The SAC will also actively participate and organize a special workshop for manufacturers as part of their continued stakeholder engagement efforts.

Source:

Bangladesh Apparel Exchange (BAE)

10.11.2022

adidas with robust growth in the third quarter

  • Currency-neutral sales up 4%, reflecting continued double-digit growth outside Greater China
  • Gross margin down 1.0pp to 49.1% as price increases were more than offset by increased supply chain costs, higher discounting, and an unfavorable market mix
  • Operating profit of € 564 million reflecting an operating margin of 8.8%
  • Net income from continuing operations of € 66 million negatively impacted by several one-off costs totaling almost € 300 million as well as extraordinary tax effects in Q3

“The market environment shifted at the beginning of September as consumer demand in Western markets slowed and traffic trends in Greater China further deteriorated. As a result, we saw a significant inventory buildup across the industry, leading to higher promotional activity during the remainder of the year which will increasingly weigh on our earnings,” said adidas CFO Harm Ohlmeyer. “We are encouraged by the enthusiasm for the upcoming FIFA World Cup which is already noticeable in our Football revenue growth. And in North America we are gearing up for an exciting upcoming basketball launch.”

  • Currency-neutral sales up 4%, reflecting continued double-digit growth outside Greater China
  • Gross margin down 1.0pp to 49.1% as price increases were more than offset by increased supply chain costs, higher discounting, and an unfavorable market mix
  • Operating profit of € 564 million reflecting an operating margin of 8.8%
  • Net income from continuing operations of € 66 million negatively impacted by several one-off costs totaling almost € 300 million as well as extraordinary tax effects in Q3

“The market environment shifted at the beginning of September as consumer demand in Western markets slowed and traffic trends in Greater China further deteriorated. As a result, we saw a significant inventory buildup across the industry, leading to higher promotional activity during the remainder of the year which will increasingly weigh on our earnings,” said adidas CFO Harm Ohlmeyer. “We are encouraged by the enthusiasm for the upcoming FIFA World Cup which is already noticeable in our Football revenue growth. And in North America we are gearing up for an exciting upcoming basketball launch.”

In the third quarter, adidas’ currency-neutral revenues increased 4%. While the company experienced high-single-digit top-line growth during the first two months of the period, deteriorating traffic trends in Greater China as well as slowing consumer demand in major Western markets weighed on the revenue development in September. In addition, the company’s decision to suspend its own operations in Russia at the end of Q1 significantly reduced revenues by more than € 100 million during the third quarter, particularly impacting the company’s direct-to-consumer (DTC) business. In euro terms, the company’s revenues grew 11% to € 6.408 billion in the third quarter (2021: € 5.752 billion).

From a category perspective, revenue growth was the highest in adidas’ strategic growth categories Football and Running, both growing at strong double-digit rates. In Football, the jersey launches ahead of the FIFA World Cup 2022 fueled consumer excitement prior to the tournament. Revenues in Running were driven by the latest iterations of adidas’ successful running franchises, including Adizero and Supernova, which both grew more than 50% during the quarter. On the Lifestyle side, the further scaling of the successful Forum and Ozweego franchises led to strong double-digit growth for both product families. At the same time, additional highly limited drops as part of the Gucci and Balenciaga partnerships continued to spark excitement around the adidas brand.   

From a regional perspective, revenue growth was driven by the company’s Western markets and APAC, which combined continued to grow at a double-digit rate (+12%). In EMEA, revenues grew 7% despite the loss of revenue in Russia/CIS of more than € 100 million. Revenues in North America increased 8% during the quarter driven by a double-digit increase in the company’s DTC channel. In APAC and Latin America, revenue growth accelerated compared to Q2, reaching 15% and 51% respectively, year-on-year. In contrast, the company’s top-line development in Greater China continues to be severely impacted by the challenging market environment, mainly related to the ongoing covid-19-related restrictions. While the company’s own retail revenues in Greater China increased 7% in the third quarter reflecting a robust sell-out, the significant product takebacks reduced the company’s sell-in and resulted in a revenue decline of 27% for the market as a whole during the three-month period.  

Strong bottom-line improvement in 2023  
In 2023, the company expects the non-recurrence of the one-off costs of around € 500 million occurred in 2022 to have a positive impact on the net income development in the same magnitude. In addition, in light of the challenging market environment, adidas established a business improvement program to safeguard the company’s profitability in 2023. As part of this program the company has launched several initiatives to mitigate the significant cost increases resulting from the inflationary pressure across the company’s value chain as well as unfavorable currency movements. In total, the program, which will result in one-off costs of around € 50 million in the fourth quarter of 2022, is expected to compensate cost headwinds of up to € 500 million in 2023. In addition, it is expected to deliver a positive profit contribution of around € 200 million next year. 

More information:
adidas outlook
Source:

adidas AG

(c) Barry-Wehmiller
21.10.2022

Barry-Wehmiller: Bob Chapman named Tharseō CEO of the Year

During an awards ceremony on Monday, October 17, the Society for Human Resource Management (SHRM) Foundation awarded Barry-Wehmiller CEO Bob Chapman its preeminent recognition in people leadership, the Tharseō CEO of the Year Award.

SHRM is the world's largest HR professional society, representing more than 300,000 HR professionals across the globe, impacting 115 million workers and their families. The Tharseō (thar-seh'-ō)—derived from the Greek word for "courageous, confident and bold"—awards are given to those who demonstrate innovative and impactful business practices leading to better workplaces and a better world by serving as visionaries, innovators and change agents.

During an awards ceremony on Monday, October 17, the Society for Human Resource Management (SHRM) Foundation awarded Barry-Wehmiller CEO Bob Chapman its preeminent recognition in people leadership, the Tharseō CEO of the Year Award.

SHRM is the world's largest HR professional society, representing more than 300,000 HR professionals across the globe, impacting 115 million workers and their families. The Tharseō (thar-seh'-ō)—derived from the Greek word for "courageous, confident and bold"—awards are given to those who demonstrate innovative and impactful business practices leading to better workplaces and a better world by serving as visionaries, innovators and change agents.

Chapman has been the CEO of Barry-Wehmiller since 1975. Since then, he has applied a blend of strategy and culture to create a thriving global organization. Chapman’s work is chronicled in his 2015 Wall Street Journal bestseller Everybody Matters: The Extraordinary Power of Caring for Your People Like Family, co-authored by Raj Sisodia, founder of Conscious Capitalism. In 2016, Harvard Business School released a case study about Barry-Wehmiller’s approach to business that is now taught at 80 business schools. A non-profit, Chapman Foundation for Caring Communities, and a leadership consulting firm, Chapman & Co. Leadership Institute, bear Chapman’s name and share some of the foundational learnings that helped transform the culture of once-traditional Barry-Wehmiller into a caring, dignity-honoring, fulfilling place to work.

In recent years, Chapman has focused on creating caring leaders of tomorrow by sponsoring programs in K-12 schools and universities. In 2021, Chapman and his team partnered with Fordham University and other Jesuit business schools to launch the Humanistic Leadership Academy which helps professors and students become more human-centered.

A sought-after global speaker, Chapman recently addressed the United Nations PRME conference on transforming education, the China Organizational Evolution Forum, Brazil’s Virtuous Leadership Conference, Vizient CEO Network, and the Healthcare Burnout Symposium, to name a few.

Source:

Barry-Wehmiller

(c) DiloGroup
Needle Module Holder
13.10.2022

DiloGroup at India ITME 2022

DiloGroup will be attenting India ITME 2022 (December 8 – 13, 2022), an exhibition for the textile industry, which offers a central forum for dialogue within the textile production sector, including textile machine building, fibre production, ancillaries and accessories. For DiloGroup this event is a good oppportunity to inform customers and interested parties about new developments aimed at improving production technologies with a focus on needlefelts.

Focal points of the development work are:

DiloGroup will be attenting India ITME 2022 (December 8 – 13, 2022), an exhibition for the textile industry, which offers a central forum for dialogue within the textile production sector, including textile machine building, fibre production, ancillaries and accessories. For DiloGroup this event is a good oppportunity to inform customers and interested parties about new developments aimed at improving production technologies with a focus on needlefelts.

Focal points of the development work are:

  1. Intense Needling:
    The development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
  2. “Fibre Pulp Recycling”
    Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
    When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
  3. Additive nonwoven production
    The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses. It is also suited for uses in the sector of apparel and shoe production.
  4. “IsoFeed”-card feeding
    In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.
Source:

DiloGroup

(c) JEC Group
23.09.2022

JEC Forum DACH 2022 announces program

This year’s JEC forum DACH, taking place from November 29 to 30, 2022, is strategically located in a composites « golden triangle », between Munich, Augsburg and Ingelstadt. This dynamic area, at the heart of the Bavarian region is known to be hosting major companies such as Airbus, Faurecia, Kuka, Siemens, Voith Composites, KraussMaffei Technologies, Cevotec, Munich Composites, or Premium Aerotec, thus promising a two-days opportunity to meet with key decision makers.

The digital platform available to all participants prior to the event enables to schedule one to one business meetings between buyers and suppliers from the whole value chain of composites, as well as informal networking during breaks, lunches and evening event.

In total, 500 attendees, suppliers and buyers, from Germany, Austria and Switzerland, are expected to participate to JEC Forum DACH 2022.

Business meetings event*
DAY 1 – November 29, 2022:

This year’s JEC forum DACH, taking place from November 29 to 30, 2022, is strategically located in a composites « golden triangle », between Munich, Augsburg and Ingelstadt. This dynamic area, at the heart of the Bavarian region is known to be hosting major companies such as Airbus, Faurecia, Kuka, Siemens, Voith Composites, KraussMaffei Technologies, Cevotec, Munich Composites, or Premium Aerotec, thus promising a two-days opportunity to meet with key decision makers.

The digital platform available to all participants prior to the event enables to schedule one to one business meetings between buyers and suppliers from the whole value chain of composites, as well as informal networking during breaks, lunches and evening event.

In total, 500 attendees, suppliers and buyers, from Germany, Austria and Switzerland, are expected to participate to JEC Forum DACH 2022.

Business meetings event*
DAY 1 – November 29, 2022:

  • 10.15 – 11.45 am – “Keynote and Plenary Conference Session : Market Developments
  • Moderator: Dr. Michael Effing, AVK
  • 4.0 – 5.30 pm – “Keynote and Plenary Conference Session: Recycling of Composites

DAY 2 – November 30, 2022:

  • 9.00– 10.30 am – “Keynote and Plenary Conference Session: Sustainability of Composites
  • 3.15 – 4.45 pm – “Keynote and Plenary Conference Session: Innovations: Raw Materials, Processes and Applications

Celebrating composites innovation through awards and startup competition

  • The AVK Innovation Awards: Goal is to promote and give prominence to new products/components and applications made from fiber-reinforced plastics (FRP) and promote new processes and methods for manufacturing FRP products.
  • Startup Booster competition: The contest is open to entrepreneurs, SMEs, startups and academic spinoffs building innovative composite and advanced materials projects that are based in Germany, Austria or Switzerland (the DACH region).

*You can view the full program here.

Source:

JEC Group

(c) Fraunhofer CCPE
19.09.2022

Fraunhofer CCPE on the way to an international circular plastics economy

More than 350 million tons of plastic are produced worldwide every year, and vast amounts of plastic waste simply end up in the environment. The circular economy offers enormous potential for keeping plastics in the loop and thus conserving resources and the environment. Since 2018, six Fraunhofer institutes in the Fraunhofer CCPE cluster have been researching how to make the plastics value chain circular, and Prof. Manfred Renner has been the new head of the cluster since August 2022. Research results, implementation projects and strategies to accelerate the transformation to a circular plastics economy will be presented by Fraunhofer CCPE at the first international Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich.

More than 350 million tons of plastic are produced worldwide every year, and vast amounts of plastic waste simply end up in the environment. The circular economy offers enormous potential for keeping plastics in the loop and thus conserving resources and the environment. Since 2018, six Fraunhofer institutes in the Fraunhofer CCPE cluster have been researching how to make the plastics value chain circular, and Prof. Manfred Renner has been the new head of the cluster since August 2022. Research results, implementation projects and strategies to accelerate the transformation to a circular plastics economy will be presented by Fraunhofer CCPE at the first international Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich.

In a circular plastics economy, resources can be saved, products can be intelligently designed for long service life, and end-of-life losses can be reduced. Systemic, technical and social innovations are needed to make the transition from a linear to a circular economy a success. This is what the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE is researching in the three divisions “Materials”, “Systems” and “Business”. The cooperation of the six Fraunhofer institutes IAP, ICT, IML, IVV, LBF and UMSICHT enables a multi-stakeholder approach in which the appropriate R&D competencies are bundled.

Fraunhofer CCPE would like to present and discuss successful projects and research approaches on an international scale at the Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich. The summit is to become an international forum for exchanging ideas for solutions and innovations for a circular plastics economy.

Cross-industry collaboration - local, regional and international
Since August 2022, Prof. Manfred Renner, Institute Director of Fraunhofer UMSICHT, is the new head of Fraunhofer CCPE. He succeeds Prof. Eckhard Weidner, who has retired. “Cross-industry cooperation - very local, but also regional and international - is the elementary prerequisite for a functioning circular plastics economy. At the summit, players from all points of the compass will meet and network in order to rethink the plastics value chain together," explains Prof. Manfred Renner, adding, “We want to provide answers to the following questions:  How can we make all Circular Economy principles, i.e. the ten R-strategies, known? How can industry, science and society best cooperate in a transformation to a circular plastics economy for the greatest possible impact?”

Results of the Fraunhofer CCPE cluster so far are innovative approaches for circular business models, intelligent collection, sorting, and recycling technologies, but also new formulations for circular polymers and compounds to enable multiple recycling cycles. With the newly developed assessment tool CRL® , companies can, for example, self-assess the maturity of products or product systems with regard to the circular economy. The tool checks the extent to which a product already takes into account circular economy principles in the areas of product design, product service system, end-of-life management and circular economy, and where there is still potential for improvement.

Source:

Fraunhofer UMSICHT

23.08.2022

imm cologne’s new story: Spring Edition in June 2023, no trade fair in January

For 2023, imm cologne is adapting its concept. The trade fair has been given a new schedule, which will see the international Interior Business Event host a new, one-off spring edition in 2023. The dates have been chosen in close consultation with its market partners.

“Today the imm cologne advisory board gave the concept proposed by Koelnmesse for the imm spring edition in June 2023 the green light unanimously. Our thanks go to the advisory board and in particular to the German industry, the retail sector and the purchasing associations for their support. This concept will ensure that imm cologne can take place again after a two-year break. The industry has given its backing to a strong interior design trade fair in Germany, the biggest market in Europe,” says Gerald Böse, Chief Executive Officer of Koelnmesse. “I firmly believe in face-to-face exchanges. In my view, they are immensely important for the industry’s development, especially in challenging times. The sector needs an in-person platform in Germany, an event with international appeal and a strong communication reach like imm cologne,” he adds.

For 2023, imm cologne is adapting its concept. The trade fair has been given a new schedule, which will see the international Interior Business Event host a new, one-off spring edition in 2023. The dates have been chosen in close consultation with its market partners.

“Today the imm cologne advisory board gave the concept proposed by Koelnmesse for the imm spring edition in June 2023 the green light unanimously. Our thanks go to the advisory board and in particular to the German industry, the retail sector and the purchasing associations for their support. This concept will ensure that imm cologne can take place again after a two-year break. The industry has given its backing to a strong interior design trade fair in Germany, the biggest market in Europe,” says Gerald Böse, Chief Executive Officer of Koelnmesse. “I firmly believe in face-to-face exchanges. In my view, they are immensely important for the industry’s development, especially in challenging times. The sector needs an in-person platform in Germany, an event with international appeal and a strong communication reach like imm cologne,” he adds.

imm cologne’s new story will take shape in two steps
The imm cologne team presented its vision for a new concept at the start of June 2022. The new story for imm cologne will unfold in two steps. The first step will be the imm spring edition from 4 to 7 June 2023. “The spring edition is synonymous with a new beginning. imm cologne wants to use it to motivate and to show how it is experimenting with new ideas and leaving well-trodden paths behind,” explains Oliver Frese, Chief Operating Officer of Koelnmesse. “What’s more, the event in June gives our partners planning certainty.”

Four-day with a trade audience focus
The cornerstones of the new concept are clear: The imm spring edition will take place over four days, running from Sunday to Wednesday, and will be geared towards trade visitors. End consumers will be able to visit the trade fair by invitation, giving the spring event a clear business focus. “It’s also our goal to create new participation formats in the market,” says Matthias Pollmann, Vice President Trade Fair Management at Koelnmesse. The kitchen segment will also be included in the imm 2023 spring edition. At the same time, the plan is to incorporate the city more closely into the spring edition as an event location.

Vision 2024+: imm cologne as the forum for future issues facing the industry
The second step will then follow in the summer of 2023. In close consultation with the industry and the associations involved in the event, the future dates for imm cologne and LivingKitchen will be set. The future vision for imm cologne conceives the interior event as more than just a key business platform. As a catalyst for the sector’s development, it addresses both industry and external issues of relevance to the imm cologne community.

More information:
imm cologne
Source:

Koelnmesse GmbH

(c) adidas AG
01.08.2022

adidas unveils collection that celebrates community, heritage, and identity

adidas unveils the first of two drops with South African luxury designer, Thebe Magugu. The debut collection for women features the celebratory and joyful artwork of a woman dancing, designed in collaboration with artist Phathu Nembilwi, and influenced by Thebe’s mother, aunt and grandmother, and the theme of femininity, interwoven with leading adidas material technology . Each garment features an abstract selection of bright and punchy colors including, impact orange and yellow, accents of shock pink, backgrounded by pulse lilac. The collection spans across sports including running , swimming , training , tennis , football , and cycling alongside a set of casual lifestyle garments.  

United by a shared passion for inclusivity and kinship, the collection includes a three-piece modesty swimwear set made in part with recycled materials and chlorine resistant fabric that is lightweight and chlorine-resistant; swimwear in inclusive sizing (XS-4XL); and gender-neutral pieces with UNITEFIT – a fit system that is created with a spectrum of sizes, genders, and forms in mind.

adidas unveils the first of two drops with South African luxury designer, Thebe Magugu. The debut collection for women features the celebratory and joyful artwork of a woman dancing, designed in collaboration with artist Phathu Nembilwi, and influenced by Thebe’s mother, aunt and grandmother, and the theme of femininity, interwoven with leading adidas material technology . Each garment features an abstract selection of bright and punchy colors including, impact orange and yellow, accents of shock pink, backgrounded by pulse lilac. The collection spans across sports including running , swimming , training , tennis , football , and cycling alongside a set of casual lifestyle garments.  

United by a shared passion for inclusivity and kinship, the collection includes a three-piece modesty swimwear set made in part with recycled materials and chlorine resistant fabric that is lightweight and chlorine-resistant; swimwear in inclusive sizing (XS-4XL); and gender-neutral pieces with UNITEFIT – a fit system that is created with a spectrum of sizes, genders, and forms in mind.

The high-performance tennis pieces will be premiered during one of the most prominent hardcourt tournaments by adidas’ inspirational athletes Dana Mathewson, Stefanos Tsitsipas, Felix Auger Aliassime and Daria Kasatkina who are passionate about showing support for what matters and encouraging diversity and inclusivity on and off the court. The tennis collection features the Purple NY UNITEFIT Tennis Dress, delivering style and functionality, made in part with recycled materials.

Alongside the performance pieces, the statement Originals looks include the Originals Crop T-shirt, in white and semi pulse lilac, delivering classic streetwear style, and the Originals 7/8 Leggings, a go-to choice for every occasion. The collaboration also includes remixes of iconic adidas footwear silhouettes including the Stan Smith, Nizza Platform, Astir and Forum footwear, which feature design accents from Thebe Magugu's signature prints. Reflecting adidas's commitment to consciously crafting performance materials, hero styles and pieces have also been made in part with recycled materials, just one of the innovations that represent adidas' commitment to help end plastic waste. 

More information:
adidas Sportswear
Source:

adidas AG

(c) adidas AG
07.07.2022

adidas Originals presents: “Always Original” Fall/Winter 2022 Drop One

This season, adidas Originals returns with the next installment of its “Always Original” initiative. First assembled in 2021 to pay homage to the multifaceted identities of women and non-binary folks, the “Always Original Collective” takes centre stage again, as the brand with the Three Stripes turns its focus to representing allyship in originality with a new collection and campaign made to fit every story.

The drop one offering has been designed for everyone – no matter their size, shape, gender, or style. Celebrating all forms of originality each piece is available in an extended size run and boasts lace constructions that are as versatile as the moves of those the collection was designed for. Created to allow everyone to express their individuality, the garments on offer reimagine adidas’ sporting history for a new generation of changemakers while the footwear selection features updated takes on the Forum Low and the Astir W silhouettes.

This season, adidas Originals returns with the next installment of its “Always Original” initiative. First assembled in 2021 to pay homage to the multifaceted identities of women and non-binary folks, the “Always Original Collective” takes centre stage again, as the brand with the Three Stripes turns its focus to representing allyship in originality with a new collection and campaign made to fit every story.

The drop one offering has been designed for everyone – no matter their size, shape, gender, or style. Celebrating all forms of originality each piece is available in an extended size run and boasts lace constructions that are as versatile as the moves of those the collection was designed for. Created to allow everyone to express their individuality, the garments on offer reimagine adidas’ sporting history for a new generation of changemakers while the footwear selection features updated takes on the Forum Low and the Astir W silhouettes.

Launching alongside the main Fall/Winter 2022 drop one selection is an expressive capsule collection co-created directly with the “Always Original Collective”. Inspired by each member’s interpretation of two key words – Belonging and Community – the capsule offers a host of bold and dynamic graphic pieces.

The first seasonal drop is accompanied by the arrival of an undeniably optimistic campaign centering on four members of the collective – Jari Jones, Amani, Naomi Otsu, and Lena Waithe – and inspired by the slogan: “They’ve been here for us. Now it’s our turn.”

The campaign visuals spotlight the shops and small businesses that helped to shape the lives of each dynamic changemaker: Yu & Me Book Store, Le’Jemalik Beauty Salon, Hibiscus Brew Coffee Shop, and Savant Studios. Putting the focus on those who have been there all along, the campaign seeks to demonstrate the power of allyship in communities around the world.

More information:
adidas adidas Originals clothing
Source:

adidas AG

Graphic: RadiciGroup
20.06.2022

RadiciGroup at Techtextil with innovative textile solutions

  • Target markets: automotive, furnishings, sports and technical apparel
  • New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

  • Target markets: automotive, furnishings, sports and technical apparel
  • New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

Moreover, RadiciGroup is participating in a forum organized by the Technical Textiles Section of Sistema Moda Italia in collaboration with the Italian Space Agency (ICE) (Hall 12.1 – Stand C58), with the goal of introducing product innovations not only coming from a single manufacturer, but also from an innovative synergistic approach all along the supply chain, from raw materials to finished products. An example of this synergistic collaboration is the “Mars Spacesuit”, recently tested in the USA by analogue astronauts as part of a space medicine project designed to measure the vital signs of future astronauts and develop technologies to support the simulation of life in space and planetary environments. RadiciGroup teamed up with major Italian textile companies and supplied the materials to make the suits for the six analogue astronauts participating in the mission and coordinated the development of the technologies needed to create the technicalwear for use in extreme environmental conditions.

 

Source:

RadiciGroup

20.06.2022

Reifenhäuser with solutions for films and nonwovens at K 2022

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The component specialists of the Reifenhäuser Extrusion Systems business unit will additionally present their portfolio at two other exhibition booths. Here, everything revolves around screws, barrels and extruders - and why, especially for processing recycled material, high-performance wear protection is essential for reliability and high economic efficiency. Reifenhäuser Extrusion Systems will also showcase its innovations for flat dies and coextrusion blocks and their coordinated interaction for maximum productivity.

In addition to its own booths, Reifenhäuser will also be present as a partner of the R-Cycle initiative as part of a joint pavilion on the open-air site in the so-called Circular Economy Forum. R-Cycle is a cooperation project of various technology companies and organizations along the entire life cycle of plastic packaging.

Aanother highlight for visitors to the Reifenhäuser trade fair booths is the opportunity to additionally participate in the in-house exhibition on October 20, 21 and 24 at the Reifenhäuser Technology Center.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Sustainable Apparel Forum (SAF) organized in Dhaka to Accelerate Apparel Sustainability in Post-Covid (c) Bangladesh Apparel Exchange
Hall View Sustainable Apparel Forum
18.05.2022

News from Sustainable Apparel Forum (SAF)

  • Sustainable Apparel Forum (SAF) organized in Dhaka to Accelerate Apparel Sustainability in Post-Covid

Policy makers, industry leaders, brands’ representatives and fashion campaigners from home and abroad gathered in Dhaka yesterday to accelerate momentum of sustainability in Bangladesh apparel industry.

More than 50 speakers as well as 20 green growth exhibitors from over 20 countries participated in the 3rd edition of Sustainable Apparel Forum (SAF) organized by Bangladesh Apparel Exchange (BAE) partnering with Bangladesh Garment Manufacturers & Exporters Association (BGMEA).

Five plenary sessions on ‘Demystifying Climate Action’, ‘Purchasing Practice’, ‘ESG (Environmental, Social & Governance) & Green Finance’, ‘Closing the Loop: Circular Economy in the Fashion Industry’, and ‘Due Diligence and Legislation’ held at the SAF along with an opening plenary and a closing plenary.  

  • Sustainable Apparel Forum (SAF) organized in Dhaka to Accelerate Apparel Sustainability in Post-Covid

Policy makers, industry leaders, brands’ representatives and fashion campaigners from home and abroad gathered in Dhaka yesterday to accelerate momentum of sustainability in Bangladesh apparel industry.

More than 50 speakers as well as 20 green growth exhibitors from over 20 countries participated in the 3rd edition of Sustainable Apparel Forum (SAF) organized by Bangladesh Apparel Exchange (BAE) partnering with Bangladesh Garment Manufacturers & Exporters Association (BGMEA).

Five plenary sessions on ‘Demystifying Climate Action’, ‘Purchasing Practice’, ‘ESG (Environmental, Social & Governance) & Green Finance’, ‘Closing the Loop: Circular Economy in the Fashion Industry’, and ‘Due Diligence and Legislation’ held at the SAF along with an opening plenary and a closing plenary.