From the Sector

Reset
62 results
19.05.2022

DOMO Chemicals stellt seine neue Marke NYLEO® vor

  • DOMOs neue NYLEO®-Marke vereint DOMOs Erfahrung mit Nylon 66-basierten Fasern und legt mit drei neuen Produkten den Schwerpunkt auf Innovation
  • NYLEO® PROTECT steht für verbesserten Flammschutz, NYLEO® 4EARTH® ist der Name für verbesserte biologische Abbaubarkeit und NYLEO® SAFE zeichnet sich durch bakteriostatische Eigenschaften aus
  • NYLEO® repräsentiert einen neuen Meilenstein in DOMOs wachsendem Angebot an nachhaltigen Lösungen

NYLEO® ist DOMOs neue Produktlinie und kombiniert bewährte Hochleistungsfasern mit bahnbrechenden neuen Lösungen. NYLEO® auf Nylon 66-Basis wird in zahlreichen Anwendungen eingesetzt, darunter Textilien, Bodenbeläge sowie Flock- und Schleifmittel. Aufgrund seiner Eigenschaften bietet NYLEO® ein breites Spektrum an Möglichkeiten für die Verbesserung der Produktleistung.

DOMOs NYLEO® setzt auf unsere Erfahrungen mit Nylon 66-basierten Fasern und legt mit drei Produkten den Schwerpunkt auf Innovation: NYLEO® PROTECT mit verbessertem Flammschutz, NYLEO® 4EARTH® mit verbesserter biologischer Abbaubarkeit und NYLEO® SAFE mit bakteriostatischen Eigenschaften.

  • DOMOs neue NYLEO®-Marke vereint DOMOs Erfahrung mit Nylon 66-basierten Fasern und legt mit drei neuen Produkten den Schwerpunkt auf Innovation
  • NYLEO® PROTECT steht für verbesserten Flammschutz, NYLEO® 4EARTH® ist der Name für verbesserte biologische Abbaubarkeit und NYLEO® SAFE zeichnet sich durch bakteriostatische Eigenschaften aus
  • NYLEO® repräsentiert einen neuen Meilenstein in DOMOs wachsendem Angebot an nachhaltigen Lösungen

NYLEO® ist DOMOs neue Produktlinie und kombiniert bewährte Hochleistungsfasern mit bahnbrechenden neuen Lösungen. NYLEO® auf Nylon 66-Basis wird in zahlreichen Anwendungen eingesetzt, darunter Textilien, Bodenbeläge sowie Flock- und Schleifmittel. Aufgrund seiner Eigenschaften bietet NYLEO® ein breites Spektrum an Möglichkeiten für die Verbesserung der Produktleistung.

DOMOs NYLEO® setzt auf unsere Erfahrungen mit Nylon 66-basierten Fasern und legt mit drei Produkten den Schwerpunkt auf Innovation: NYLEO® PROTECT mit verbessertem Flammschutz, NYLEO® 4EARTH® mit verbesserter biologischer Abbaubarkeit und NYLEO® SAFE mit bakteriostatischen Eigenschaften.

DOMOs Erbe an innovativen Nylon 66-Fasern
DOMOs Team für Hochleistungsfasern hat seinen Sitz im französischen Valence. DOMO produziert seit 1955 PA66-Fasern für Anwendungsbereiche wie Schleifmittelvliese, Luftfahrt, Teppichböden, Hochleistungstextilien, Flock für Polstermöbel, Innenausstattung und -böden von Autos sowie viele weitere Verbraucherprodukte. Die NYLEO® Marke wird nun auf das gesamte Portfolio an Polyamid 66 (PA 66)-Faserprodukten, einschließlich gekräuseltem TOW oder TOW für die Flockherstellung, angewendet. Fasern auf Basis von PA66 sind für hohe Widerstandsfähigkeit, hervorragende Verschleiß- und Abriebfestigkeit, hohe Zähigkeit, ausgezeichnete Färbbarkeit und Farbechtheit sowie einheitliche Qualität und weiche Haptik bekannt. Dazu gehören:

  • NYLEO® PROTECT – um das Sicherheitsniveau in den Bereichen persönliche Schutzausrüstung, Bekleidung, Möbel und Transport zu erhöhen, hat DOMO eine neue flammhemmende PA 66-Faser entwickelt. NYLEO® PROTECT vereint alle Vorteile von PA 66, wie z. B. mechanische Eigenschaften, Komfort, geringes spezifisches Gewicht und hervorragende Abriebfestigkeit, mit verbessertem Flammschutz. Der Sauerstoffindex (LOI) von NYLEO® PROTECT wurde auf 28 % verbessert, was dem Niveau typischer flammhemmender Fasern entspricht.
  • NYLEO® 4EARTH® – immer mehr Hersteller befassen sich mit den Themen Nachhaltigkeit und Kreislaufwirtschaft und versuchen ihren Einfluss auf die Umwelt weitmöglichst zu verringern, z. B. durch ein besseres Abfallmanagement. Die textile Wertschöpfungskette hat starken Anteil an den Mülldeponien, auf denen die meisten Kleidungsstücke enden. Aus diesem Grund entwickelte DOMO mit NYLEO® 4EARTH® eine Faser, die auf Deponien besser biologisch abgebaut wird. Während traditionelle Nylon 66-Fasern 50 – 100 Jahre für den Zerfall benötigten, braucht NYLEO® 4EARTH aufgrund seiner verbesserten biologischen Abbaubarkeit nur fünf Jahre, um abgebaut zu werde.
  • NYLEO® SAFE – die Verbreitung von Bakterien hat sich zu einem immer dringlicheren Gesundheitsproblem entwickelt. Bei NYLEO® SAFE wird ein bakteriostatisches Mittel in die Polymermatrix eingebracht, wo es die Fasern langfristig schützt und das Wachstum von Bakterien verhindert.
Source:

DOMO Chemicals / Marketing Solutions NV

(c) Eurotay
18.05.2022

Garment manufacturer Eurotay at Denim Première Vision with its future-forward vision

Eurotay showcased at Denim Première Visionits vision and products through the AW 23/24 collection inspired by two themes: Nostalgia and #Still Possible.

Nostalgia stands for heritage and advancement, taking inspiration from classic favorites while enhancing new and existing styles. Setting the tone of the line are vintage-looking washes, echoing the 80s and 90s light acid washes as well as used look with bumped edges or fringed hems. Stretch, comfort stretch with very little elastane and even rigid denim feature in this collection providing catering to any need or preference.

The #Still Possible collection is based on the premise that the textile industry is one of the most polluting ones on the planet, thus it aims to shine a light on how a denim garment can still be made whilst reducing the number of resources employed and by being more conscious about the materials chosen. By using EIM and LCA, garment durability, traceability, recyclability as well as material health are guaranteed, for a collection that looks to a brighter and greener future.

Eurotay showcased at Denim Première Visionits vision and products through the AW 23/24 collection inspired by two themes: Nostalgia and #Still Possible.

Nostalgia stands for heritage and advancement, taking inspiration from classic favorites while enhancing new and existing styles. Setting the tone of the line are vintage-looking washes, echoing the 80s and 90s light acid washes as well as used look with bumped edges or fringed hems. Stretch, comfort stretch with very little elastane and even rigid denim feature in this collection providing catering to any need or preference.

The #Still Possible collection is based on the premise that the textile industry is one of the most polluting ones on the planet, thus it aims to shine a light on how a denim garment can still be made whilst reducing the number of resources employed and by being more conscious about the materials chosen. By using EIM and LCA, garment durability, traceability, recyclability as well as material health are guaranteed, for a collection that looks to a brighter and greener future.

Eurotay has been committed from day one to using less water, less energy, less chemicals to reduce its environmental footprint and its carbon emission and meet the goals of EU Green Deal targets. The company is geared towards building a more and more responsible industry by working hard to reach a set of sustainable goals by 2025. Additionally, the company is working on developing Life Cycle Assessment (LCA) and EPD (Environmental Product Declaration) measuring the global warming, water consumption, land occupation, eutrophication and abiotic depletion performances.

Source:

Eurotay / Menabò Group srl

(c) Messe Frankfurt (HK) Ltd.
17.05.2022

Cinte Techtextil China to address personal hygiene and sustainability demands

With global consumers becoming more conscious about personal hygiene and environmental protection, exhibitors at Cinte Techtexil China will spotlight materials and technologies for products that respond to these trends. The fair will probe into the associated growth opportunities as the country is one of the leading markets for nonwovens and technical textiles. The event will be held from 6 – 8 September at the Shanghai New International Expo Centre.

The technical textiles and nonwovens industries, the latter notably, are significantly expanding amid the pandemic. A recent forecast[1] predicts that the global polypropylene nonwoven fabric market will continue to rise at a CAGR of 6.7%, reaching USD 39.23 billion by 2028. The anticipated growth is bolstered by demands in end-use industries such as sanitation, medical, automotive and more. In 2020, Asia Pacific was named the largest regional market in the world and is expected to grow significantly over the forecasted period.

With global consumers becoming more conscious about personal hygiene and environmental protection, exhibitors at Cinte Techtexil China will spotlight materials and technologies for products that respond to these trends. The fair will probe into the associated growth opportunities as the country is one of the leading markets for nonwovens and technical textiles. The event will be held from 6 – 8 September at the Shanghai New International Expo Centre.

The technical textiles and nonwovens industries, the latter notably, are significantly expanding amid the pandemic. A recent forecast[1] predicts that the global polypropylene nonwoven fabric market will continue to rise at a CAGR of 6.7%, reaching USD 39.23 billion by 2028. The anticipated growth is bolstered by demands in end-use industries such as sanitation, medical, automotive and more. In 2020, Asia Pacific was named the largest regional market in the world and is expected to grow significantly over the forecasted period.

The prediction reaffirms the growth prospects of nonwovens. In this regard, industry players expressed much optimism about associated future opportunities during Cinte Techtextil China last year. “The field of nonwovens is poised for a positive growth as the awareness of personal hygiene and pandemic prevention sustains in the domestic market,” commented Mr James Gao, Head of Marketing and Textile Technologies, Uster Technologies (China) Co Ltd. He added: “We decided to join the fair and showcase our new launches as we remain confident in the future development of the industry, especially since China is dominating the global scene.”

Going green is the way forward
Turning to yarns and fibres, the sector is shifting to greener and smarter production that echoes the trend towards sustainability that is gaining considerable traction across the globe. Meanwhile in China, this movement was observed by many exhibitors at the 2021 edition, including Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, the Chinese subsidiary of the Fil Man Made Group. He mentioned: “The market is paying more attention to environmental protection, and we receive enquiries about special yarns for this every day. We focus on technical yarns for filtration as well as anti-bacterial properties, which are very important for the environment. The potential here in China is incredible and this is a big opportunity for everybody.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span across a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw material providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

(c) DOMO Chemicals
12.05.2022

DOMO stellt neue Materialdatenbank für Spritzgusssimulationen vor

  • DOMOs neuer Service deckt das globale Produktportfolio von Werkstoffen für den Spritzguss ab.
  • DOMO Engineered Materials ermöglicht den direkten Zugriff auf die stets aktuelle Materialdatenbank für Spritzgusssimulationen, sodass Kunden jederzeit die aktuellsten, umfangreichsten und validierten TECHNYL®-Werkstoffdaten einsehen können.
  • Dieser neue Service für schnellere Projektentwicklungszeiten wird am 12. Mai 2022 freigeschaltet.

Bisher mussten Anwender, die die neuesten Datenbanken für Spritzgussanwendungen von den jeweiligen Anbietern erhalten wollten, auf ein Update der Simulationssoftware warten. Von der Verfügbarkeit neuer Materialien bis zur Aktualisierung der öffentlichen Datenbanken verging beträchtliche Zeit – mitunter mehr als ein Jahr. Darüber hinaus mussten sich Anwender regelmäßig an verschiedene Kontakte wenden, um von Materialanbietern Auskünfte über die neuesten verfügbaren Ressourcen einzuholen.

  • DOMOs neuer Service deckt das globale Produktportfolio von Werkstoffen für den Spritzguss ab.
  • DOMO Engineered Materials ermöglicht den direkten Zugriff auf die stets aktuelle Materialdatenbank für Spritzgusssimulationen, sodass Kunden jederzeit die aktuellsten, umfangreichsten und validierten TECHNYL®-Werkstoffdaten einsehen können.
  • Dieser neue Service für schnellere Projektentwicklungszeiten wird am 12. Mai 2022 freigeschaltet.

Bisher mussten Anwender, die die neuesten Datenbanken für Spritzgussanwendungen von den jeweiligen Anbietern erhalten wollten, auf ein Update der Simulationssoftware warten. Von der Verfügbarkeit neuer Materialien bis zur Aktualisierung der öffentlichen Datenbanken verging beträchtliche Zeit – mitunter mehr als ein Jahr. Darüber hinaus mussten sich Anwender regelmäßig an verschiedene Kontakte wenden, um von Materialanbietern Auskünfte über die neuesten verfügbaren Ressourcen einzuholen.

DOMO ermöglicht es seinen Kunden jetzt mit regelmäßigen Aktualisierungen der Datenbank für Autodesk Moldflow einen wertvollen neuen Service zu erhalten. Auf Anfrage werden auch Spritzgussmaterialdaten für andere Softwarelösungen (Moldex3D, CADmould usw.) von unserem Sales und Technical Manager zur Verfügung gestellt.

Da Kunden so stets die neuesten Materialdaten für Spritzgusssimulationen zur Hand haben, können sie Zeit und Mühe bei der Generierung der notwendigen Daten für ihre Projekte sparen. Diese validierten Messdaten für präzisere Simulationen ermöglicht den Kunden, ihre Entwicklungszeiten zu verkürzen und Produkte schneller auf den Markt zu bringen.

Darüber hinaus umfassen diese direkten Aktualisierungen auch neue Werkstoffe aus DOMOs Entwicklungspipeline sowie neue validierte Daten, die über die gewöhnliche Vorgehensweise von Spritzgussanwendungen hinausgehen und beispielsweise die Optimierung der Vorhersage von Faserausrichtungen erlauben.

More information:
Domo DOMO Chemicals Kunststoffe
Source:

DOMO Chemicals / Marketing Solutions NV

(c) RadiciGroup
11.05.2022

RadiciGroup closes 2021 with positive results

  • Continued focus on sizeable investments in innovation and sustainability.
  • Underway in India, the acquisition of the Engineering Plastics business of Ester Industries Ltd. with the objective of keeping up the Group’s global growth trend

With total sales of EUR 1.508 million generated by over 30 production and sales units in Europe, Asia and America, RadiciGroup closed its 2021 financial year with positive results, despite the difficulties due to the lingering effects of the pandemic and the steep increase in the cost of raw materials and energy, especially during the latter part of the year.

The Group – led by brothers Angelo, Maurizio and Paolo Radici – continued to pursue its strategy of focusing on the core businesses considered to be strategic and synergistic, such as nylon chemicals, engineering polymers and advanced textile solutions, while, at the same time,  introducing new products, such as a line of personal protective equipment for medical and industrial use.

EBITDA reached EUR 268 million, and net income for the year was EUR 150 million.

  • Continued focus on sizeable investments in innovation and sustainability.
  • Underway in India, the acquisition of the Engineering Plastics business of Ester Industries Ltd. with the objective of keeping up the Group’s global growth trend

With total sales of EUR 1.508 million generated by over 30 production and sales units in Europe, Asia and America, RadiciGroup closed its 2021 financial year with positive results, despite the difficulties due to the lingering effects of the pandemic and the steep increase in the cost of raw materials and energy, especially during the latter part of the year.

The Group – led by brothers Angelo, Maurizio and Paolo Radici – continued to pursue its strategy of focusing on the core businesses considered to be strategic and synergistic, such as nylon chemicals, engineering polymers and advanced textile solutions, while, at the same time,  introducing new products, such as a line of personal protective equipment for medical and industrial use.

EBITDA reached EUR 268 million, and net income for the year was EUR 150 million.

Despite this situation, RadiciGroup considers it essential to continue making investments.

“In 2021, the Group invested EUR 53 million financed from cash flow,” Alessandro Manzoni, CFO of RadiciGroup, emphasized. “There was no impact on net financial position, which registered an improvement over 2020, as did all our balance sheet ratios."

Furthermore, in spite of the complexity of the period, in 2022 the Group shareholders have kept on with their significant investment plan aimed at strengthening RadiciGroup’s presence in global markets and improving its competitiveness.

Indeed, the Group has moved forward, according to plan, with the acquisition of the Engineering Plastics business of Ester Industries Ltd., an India-based company engaged for decades in the production of engineering polymers and listed on the Bombay Stock Exchange. RadiciGroup’s EUR 35 million investment in this transaction furthers the internationalization strategy of its High Performance Polymers business area.

Source:

RadiciGroup

10.05.2022

Stahl releases annual ESG report with focus on sustainability and transparency

Stahl, an active proponent of responsible chemistry, has published its 2021 Environment, Social, and Governance (ESG) Report. The report outlines the company’s sustainable development ambitions and its achievements over the year. It also features Stahl’s ambitious climate mitigation targets for 2030, such as the transition to more renewable feedstocks.

Stahl, an active proponent of responsible chemistry, has published its 2021 Environment, Social, and Governance (ESG) Report. The report outlines the company’s sustainable development ambitions and its achievements over the year. It also features Stahl’s ambitious climate mitigation targets for 2030, such as the transition to more renewable feedstocks.

The 2021 Stahl ESG Report is a cornerstone of Stahl’s commitment to reporting transparently on its progress toward a more sustainable chemicals value chain. This acknowledges the important role that industry must play in tackling climate change while enabling a higher quality of life for more people. A key focal point of the new report is a progress update on Stahl’s ESG Roadmap. Introduced last year, this ten-year plan outlines the company’s ESG commitments and targets for 2023 and 2030.
 
Climate action
Stahl is focused on mitigating climate change by reducing greenhouse gas (GHG) emissions from all activities over which it has influence. This includes investing in renewable energy and process efficiencies to lower the GHG emissions caused directly by Stahl’s own operations and the energy used to power them. On this point, progress was made toward the 2023 and 2030 targets in 2021, including a reduction in Scope 1 and 2 CO2 emissions of 15%. Also covered are Stahl’s indirect value-chain impacts, for example, from the raw materials it buys. Looking beyond Stahl’s direct environmental impacts and fostering greater supply-chain transparency will be vital for tackling emissions on a wider scale.

Creating responsible chemistry, together
In 2021, advances were made regarding the company’s diversity and safety targets, which are areas of continuous improvement. Stahl is committed to ensuring a safe working environment, as well as nurturing a diverse and inclusive workplace to continuously improve employee skills.

EcoVadis Gold rating
Fostering ethical behavior through exemplary leadership and governance is key to Stahl’s ambitions. Achieving the EcoVadis Gold rating was an important milestone in this respect. This well-established award reflects the company’s ongoing commitment to supply chain transparency and working with partners to improve the sustainability of its products and operations.

Source:

Stahl Holdings B.V.

05.05.2022

Monforts at Techtextil showcasing its finishing and coating technologies

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

03.05.2022

DOMO: Mechanische Struktursimulation für PA6-GF-Werkstoffe

  • Das MMI (Materialmodellierung, mechanische Berechnung und Spritzgusssimulation)-Team für fortgeschrittene Simulationstechnologien bietet erheblich verbesserten Service für PA6-GF-Werkstoffe
  • Integrative Simulationsumgebung lässt sich effektiv mit der Digimat-Software anwenden und gewährleistet präzise und robuste Finite-Elemente-Analysen

DOMOs fortschrittliche Simulationsumgebung MMI für PA66-Bauteile gilt auf dem Markt bereits als Referenz für präzise Simulationen. Ab sofort unterstützt dieses Simulationstool OEMs und Bauteillieferanten bei der Entwicklung von leistungsfähigen, leichten und kosteneffizienten Bauteilen aus PA6. Mit dem DOMO Service Hub können Bauteilentwickler ihre Polyamidlösungen somit schneller in Serie bringen.

Bei glasfaserverstärkten Materialien muss die Ausrichtung der Glasfasern berücksichtigt werden, die während des Spritzgussverfahrens entsteht. Dabei ermöglicht die Digimat-Software eine genaue integrative Simulation. DOMO besitzt ein umfangreiches Fachwissen bei der integrativen Simulation der TECHNYL® A-Serie von PA66-GF-Materialien und ist daher in der Lage, präzise Bauteilsimulationen durchzuführen.

  • Das MMI (Materialmodellierung, mechanische Berechnung und Spritzgusssimulation)-Team für fortgeschrittene Simulationstechnologien bietet erheblich verbesserten Service für PA6-GF-Werkstoffe
  • Integrative Simulationsumgebung lässt sich effektiv mit der Digimat-Software anwenden und gewährleistet präzise und robuste Finite-Elemente-Analysen

DOMOs fortschrittliche Simulationsumgebung MMI für PA66-Bauteile gilt auf dem Markt bereits als Referenz für präzise Simulationen. Ab sofort unterstützt dieses Simulationstool OEMs und Bauteillieferanten bei der Entwicklung von leistungsfähigen, leichten und kosteneffizienten Bauteilen aus PA6. Mit dem DOMO Service Hub können Bauteilentwickler ihre Polyamidlösungen somit schneller in Serie bringen.

Bei glasfaserverstärkten Materialien muss die Ausrichtung der Glasfasern berücksichtigt werden, die während des Spritzgussverfahrens entsteht. Dabei ermöglicht die Digimat-Software eine genaue integrative Simulation. DOMO besitzt ein umfangreiches Fachwissen bei der integrativen Simulation der TECHNYL® A-Serie von PA66-GF-Materialien und ist daher in der Lage, präzise Bauteilsimulationen durchzuführen.

Die neuen MMI-PA6-GF Materialkarten können für eine Vielzahl von Glasfaserkonzentrationen und -temperaturen sowie für elastische und elastoplastische Materialmodelle mit Versagensindikatoren eingesetzt werden. Diese sind in der Digimat Software verfügbar und führen zu den gleichen präzisen Ergebnissen wie bei den TECHNYL® A PA66-Werkstoffen. Die neuen Materialkarten heben somit die PA6-Datenbank auf das gleiche Leistungsniveau wie PA66 an. Im nächsten Schritt werden in die Digimat-Datenbank auch crashspezifische und thermische Modelle eingepflegt.

„Dank der präzisen MMI-Simulation können TECHNYL® Bauteile entwickelt werden, die leichter, leistungsfähiger und kosteneffizienter sind“, erklärt Gilles Robert, Material Expert bei DOMO. „Unsere Kunden profitieren von kürzeren Entwicklungszeiten und haben eine bessere Kontrolle über die internen Kosten. Der kontinuierliche Aufbau der TECHNYL®-Materialdatenbank erweitert das Anwendungsfeld dieser Simulationsumgebung auf PA6 Bauteile.“

Source:

DOMO Chemicals / Marketing Solutions NV

(c) DOMO Chemicals
29.04.2022

DOMO Chemicals expands production capacity of TECHNYL® polyamide in China

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

The global demand for polyamide materials is currently booming at a CAGR of up to 3 percent. The adoption of new energy vehicles (including pure electric, hybrid and fuel cell vehicles) is expected to reach 45 percent globally by 2030, and automakers are increasingly using sustainable materials to make components, which are key growth drivers of the polyamide market. In addition, the demand for miniaturized circuit breakers, contactors, plug switches, and other components in the electrical and electronics and industrial consumer goods industries further opens up the application potential for polyamide materials.

DOMO Chemicals will continue to expand the capacity of its production site in Jiaxing, Zhejiang Province, which has been planned to be gradually introduced in three stages:

  • Since March 2022, an additional 6,000 tons of capacity has been made available, with the plant achieving the total capacity of 14,000 tons of PA6 from April onwards.
  • A 35,000-ton new plant in Haiyan is planned to be completed in the third quarter of 2023, in which DOMO Chemicals has invested more than 14 million euros (97 million yuan).
  • Going forward, DOMO Chemicals will further expand the plant, gradually increasing its capacity to 50,000 tons.

In addition to the expansion, the plant will also use renewable energy wherever possible, adopt advanced water and air treatment technologies to reduce water consumption and CO2 emissions, and fully comply with Health, Safety and Environmental Management System (HSE) regulations. DOMO Chemicals will improve HSE compliance continuously and work closely with the local government, while partnering with key local and global customers to accelerate innovation and development across a wide range of industries.

TECHNYL® has been committed to helping customers improve their low-carbon competitiveness since its very first year in China. It allows OEMs and component makers in the automotive, electrical & electronics, and industrial consumer goods segments to create lightweight, durable, aesthetically pleasing, smart and environmentally-friendly products.

Source:

DOMO Chemicals / Marketing Solutions NV

(c) ChemSec, report Not Quite 100%
28.04.2022

ChemSec' Study: Consumer brands demand clarity on recycled plastics

A new interview study from NGO ChemSec shows that there is a gap between supply and demand when it comes to recycled materials, causing confusion and bottlenecks. Among other things, suppliers go out of their way using elaborate trade schemes to reach the coveted ”100% recycled” tag, which – it turns out – is not that important to consumer product brands. Far more crucial aspects, according to several major B2C companies, are:

  • Honest communication towards customers
  • Comprehensive information from suppliers
  • Clear standards for recycled material

These are some of the conclusions from NGO ChemSec’s survey and interview study with 26 highly well-known consumer product brands. All brands responded to a survey concerning their current plastic use, as well as their needs, expectations and challenges regarding using more recycled material, to enable the shift to a circular economy for plastics.

Ten of the brands then participated in in-depth interviews on the same topics:, Essity, H&M, IKEA, Inditex , Lego, Mars,  SC Johnson, Tarkett, Unilever and Walgreens Boots Alliance.

A new interview study from NGO ChemSec shows that there is a gap between supply and demand when it comes to recycled materials, causing confusion and bottlenecks. Among other things, suppliers go out of their way using elaborate trade schemes to reach the coveted ”100% recycled” tag, which – it turns out – is not that important to consumer product brands. Far more crucial aspects, according to several major B2C companies, are:

  • Honest communication towards customers
  • Comprehensive information from suppliers
  • Clear standards for recycled material

These are some of the conclusions from NGO ChemSec’s survey and interview study with 26 highly well-known consumer product brands. All brands responded to a survey concerning their current plastic use, as well as their needs, expectations and challenges regarding using more recycled material, to enable the shift to a circular economy for plastics.

Ten of the brands then participated in in-depth interviews on the same topics:, Essity, H&M, IKEA, Inditex , Lego, Mars,  SC Johnson, Tarkett, Unilever and Walgreens Boots Alliance.

Is non-mechanical recycling the answer?
Only about ten percent of all discarded plastics is recycled today, which is of course not nearly enough to achieve a circular plastics economy. Despite ambitions and initiatives to reduce plastics use – replacing the materials with other, more sustainable ones – the “plastic tap” is not expected to be turned off anytime soon. Quite the opposite, which makes raising the recycling rates more important than ever.

Although commercially viable, traditional (mechanical) recycling is afflicted with severe flaws, such as legacy chemicals, quality and functionality issues, as well as the lack of clean and sorted waste streams. The brands cited quality and functionality issues as the main obstacles for using more recycled material in their products.

This opens up for non-mechanical recycling, sometimes referred to as chemical recycling, where the plastic is either dissolved or broken down into smaller building blocks. Harmful additives and other hazardous chemicals can be removed in the process, and a material comparable to virgin plastic can be achieved – at least in theory.

So far, however, non-mechanical recycling technologies are costly, energy-intensive, and often require the addition of a great deal of virgin plastic to work – the very material that needs to be phased out.

The chain of custody models needs to be detangled
Apart from these production issues, there is a wide range of chain of custody models surrounding non-mechanical recycling, including mass balance and book & claim, which enable trade of credits or certificates for recycled material.

This cuts the physical connection between input and output, making it possible for a supplier to sell a material as “100% recycled”, when the actual recycled content could be zero.

This is a major issue for the brands ChemSec has spoken to, who value honest and correct communication towards customers. It turns out, perhaps somewhat surprisingly, that being able to slap a “made from 100% recycled plastic” label on a product is not all that important to brands.

To the brands, a physical connection between input (the discarded plastic waste headed for recycling) and output (the product at least partially made from recycled plastics) is far more important.

A physical connection, along with correct and adequate information from suppliers, as well as clearer standards and guidelines than what is available today, is what brands require to increase the use of recycled material and move us closer to a circular economy for plastics.

More information:
ChemSec plastics Recycling
Source:

ChemSec

22.04.2022

Cone Denim launches U.S. Grown Hemp denim collection with BastCore

Cone Denim®, a leader in denim authenticity and sustainable innovation, launches a new U.S. grown hemp denim collection in collaboration with expert hemp processing innovator, BastCore. Cone is excited to expand its sustainable denim offerings and increase its support of the American agriculture industry, featuring denim made with Alabama hemp and U.S. cotton and dyed with natural indigo grown in Tennessee.

Cone Denim is honored to partner with BastCore, a team that aligns with Cone’s values and its commitment to innovation, quality, sustainability, and traceability. The pioneers at BastCore have created patent-pending technology and a proprietary process that produces clean, mechanically processed, OEKO-TEX® STANDARD 100 certified and USDA bio-preferred hemp fiber out of its operation in Montgomery, Alabama.

Cone Denim®, a leader in denim authenticity and sustainable innovation, launches a new U.S. grown hemp denim collection in collaboration with expert hemp processing innovator, BastCore. Cone is excited to expand its sustainable denim offerings and increase its support of the American agriculture industry, featuring denim made with Alabama hemp and U.S. cotton and dyed with natural indigo grown in Tennessee.

Cone Denim is honored to partner with BastCore, a team that aligns with Cone’s values and its commitment to innovation, quality, sustainability, and traceability. The pioneers at BastCore have created patent-pending technology and a proprietary process that produces clean, mechanically processed, OEKO-TEX® STANDARD 100 certified and USDA bio-preferred hemp fiber out of its operation in Montgomery, Alabama.

Cone’s U.S. Hemp Collection includes a range of fabrics featuring classic 3×1 and comfort stretch to modern workwear constructions. The collection further expands upon Cone’s sustainability and traceability practices, driving the future of the industry. The proximity of the hemp, indigo, and cotton crops in the U.S. to the company’s mills in Mexico is also key in creating the smallest environmental impact and footprint possible.

Hemp offers many key benefits in creating the next level of sustainable denim:

  • More than 50% water savings occur, compared to cotton
  • No chemicals, wet processing, pesticides, or herbicides are used
  • Hemp grows in a variety of soils with excellent biodegradability, is antimicrobial, has high tensile strength, moisture regain content, and tenacity
  • Hemp and natural indigo crops have high rates of carbon sequestration, which ultimately benefits the environment and improves the soil’s health for other crops (climate positive)
Source:

Cone Denim

22.04.2022

AkzoNobel completes acquisition of Colombia-based coatings company Grupo Orbis

Akzo Nobel N.V. has completed the acquisition of Colombia-based paints and coatings company Grupo Orbis, strengthening its long-term position in Latin America.

Present in ten countries in Central America, South America and the Antilles, Grupo Orbis has consolidated revenue of around €360 million. The transaction includes the Pintuco paints and coatings business, Andercol and Poliquim (resins, emulsions, adhesives and specialty chemicals), Mundial (paints and related product distribution services) and Centro de Servicios Mundial (shared services center).

The Pintuco portfolio consists of 75% decorative paints and 25% coatings, offering a wide range of products across ten countries, creating several opportunities for revenue synergies.

Akzo Nobel N.V. has completed the acquisition of Colombia-based paints and coatings company Grupo Orbis, strengthening its long-term position in Latin America.

Present in ten countries in Central America, South America and the Antilles, Grupo Orbis has consolidated revenue of around €360 million. The transaction includes the Pintuco paints and coatings business, Andercol and Poliquim (resins, emulsions, adhesives and specialty chemicals), Mundial (paints and related product distribution services) and Centro de Servicios Mundial (shared services center).

The Pintuco portfolio consists of 75% decorative paints and 25% coatings, offering a wide range of products across ten countries, creating several opportunities for revenue synergies.

More information:
AkzoNobel Coatings
Source:

AkzoNobel

(c) UNCG
07.04.2022

Archroma partners with University of North Carolina Greensboro on color expert education

Archroma, a leader in specialty chemicals towards sustainable solutions, has announced the launch of a collaboration with the University of North Carolina Greensboro (UNCG) and its Consumer, Apparel, and Retail Studies (CARS) department, aiming to further the education of its students in the area of color management expertise.

As per the agreement, Archroma will donate its color management tools for their design projects, gaining hands-on expertise that equips them for successful careers in the fashion and textiles industries.

The students will have access to a complete set of the ready-to-use color library developed by Archroma for cotton and polyester. The library, well known among fashion designers and stylists as the Color Atlas by Archroma®, which was launched in 2016 to provide off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Today, the Color Atlas contains 4’320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists, and 1,440 colors on polyester.

Archroma, a leader in specialty chemicals towards sustainable solutions, has announced the launch of a collaboration with the University of North Carolina Greensboro (UNCG) and its Consumer, Apparel, and Retail Studies (CARS) department, aiming to further the education of its students in the area of color management expertise.

As per the agreement, Archroma will donate its color management tools for their design projects, gaining hands-on expertise that equips them for successful careers in the fashion and textiles industries.

The students will have access to a complete set of the ready-to-use color library developed by Archroma for cotton and polyester. The library, well known among fashion designers and stylists as the Color Atlas by Archroma®, which was launched in 2016 to provide off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Today, the Color Atlas contains 4’320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists, and 1,440 colors on polyester.

Beside the physical Color Atlas library, the students in the CARS program will also have access to the full digital files for use in the industry-leading 3D fashion design and development software Browzwear VSticher.

The students will be able to use the Color Atlas books and the digital data as a color selection resources to use in a variety projects and assignments.

Source:

Archroma / EMG

21.03.2022

OEKO-TEX® Association turns 30: Trust, Safety, Sustainability

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

OEKO-TEX® market leadership
In 1992, 20 years before the United Nations announced the Sustainable Development Goals (SDGs), OEKO-TEX® launched STANDARD 100 by OEKO-TEX®, now one of the best-known labels for product safety.
"It emerged from the Schadstoffgeprüft nach ÖTN 100(tested for harmful substances according to ÖTN 100), developed by OETI in 1989 to address increasing public interest in textile ecology and health," the Austrian Textile Research Institute reminds us. The limit values and test methods on which STANDARD 100 by OEKO-TEX® is based were internationally standardized and are adapted to the latest scientific findings and legislation at least once a year - a principle that is applied to all OEKO-TEX® standards. Prof. Dr. Stefan Mecheels, the owner of the textile testing service provider Hohenstein, adds: "From the very beginning, we have considered the needs of all players in the textile value chain and continue to create solutions for current and future market requirements."

At least seven SDGs are firmly integrated into the OEKO-TEX® product portfolio. For example, Good Health & Well-Being (SDG 3) and Clean Water & Sanitation (SDG 6) are reflected in the STeP by OEKO-TEX® factory certification, and Responsible Consumption & Production (SDG 12) and Climate Action (SDG 13) are implemented through the comprehensive MADE IN GREEN by OEKO-TEX® product label.

Today, the international association consists of 17 independent research and testing institutes focused on textile and leather, with contact offices in over 60 countries. They are responsible for the joint development of the test methods and limit values in the OEKO-TEX® Standards and carry out laboratory tests and factory audits according to globally uniform specifications. These comprehensive product and process audits to ensure appropriate risk management, consumer and environmental protection, and legal compliance. With their wide-ranging research and development, the accredited OEKO-TEX® test institutes provide important insight for innovations within the textile and leather industry. They work in close cooperation with manufacturers and make a significant contribution to the development of high-quality textile and leather products at all stages of the value chain.

Mirror of social and political development
Being close to the market, and ideally, one step ahead is essential to supporting companies who are adapting to constantly changing conditions and meeting consumer expectations. Therefore, the development of OEKO-TEX® is not only a reflection of scientific knowledge but also of social and political trends. The focus is always on standardizing sustainable action and measures and making it easier for the industry to quickly and comprehensively implement sustainability goals.

Exchange with third parties is particularly valuable for this purpose. OEKO-TEX® participates in various international multi-stakeholder initiatives such as the Organization for Economic Co-operation and Development (OECD), the Partnership for Sustainable Textiles, the ZHDC (Zero Discharge of Hazardous Chemicals), and Greenpeace.
In addition to cooperation with external multi-stakeholder initiatives, the OEKO-TEX® International Advisory Board (IAB) meets annually. The core function of the IAB is to help review consistent and market-oriented Standards development proposals by the OEKO-TEX® Working Groups. In addition, OEKO-TEX® is conducting a public stakeholder consultation to gain further insights from all interest groups, which it will integrate into further development of the Standards.
Using three decades of experience for the future
The founding goal of enabling responsible choices that preserve our planet for future generations has become increasingly urgent over the past 30 years. So, OEKO-TEX® is even more resolute than ever in developing comprehensive solutions. We stand by industry and consumers as a trusted partner for the challenges ahead. In addition to the IMPACT CALCULATOR launched in January 2022, which helps STeP by OEKO-TEX® certified production facilities reduce their carbon emissions and water consumption, this summer, the association will launch a service to help companies transition to the upcoming Due Diligence Laws.

Source:

Oeko-Tex

Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
CCU-2022 Award-Nominees
14.03.2022

“Best CO2 Utilisation 2022” Award Nominees

  • Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
  • Conference on CO2-based Fuels and Chemicals 2022 – Cologne (Germany) and online, hybrid conference, 23-24 March 2022

Carbon Capture and Utilisation (CCU) Innovations of the Year 2022: A lot of technologies are in place and in development to face the challenges of a sustainable chemicals and fuels production based on the utilisation of captured CO2 from industrial off-gases or directly from the atmosphere. To honor these, nova-Institute grants its annual award, “Best CO2 Utilisation”, within the framework of the “Conference on CO2-based Fuels and Chemicals” taking place in Cologne on 23-24 March 2022. Great submissions reached the nova-Institute and six nominees now get the chance to demonstrate their full potential to a wide audience in Cologne (Germany) and online.

Here are the six nominees:

  • Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
  • Conference on CO2-based Fuels and Chemicals 2022 – Cologne (Germany) and online, hybrid conference, 23-24 March 2022

Carbon Capture and Utilisation (CCU) Innovations of the Year 2022: A lot of technologies are in place and in development to face the challenges of a sustainable chemicals and fuels production based on the utilisation of captured CO2 from industrial off-gases or directly from the atmosphere. To honor these, nova-Institute grants its annual award, “Best CO2 Utilisation”, within the framework of the “Conference on CO2-based Fuels and Chemicals” taking place in Cologne on 23-24 March 2022. Great submissions reached the nova-Institute and six nominees now get the chance to demonstrate their full potential to a wide audience in Cologne (Germany) and online.

Here are the six nominees:

  • Acies Bio (SI) – OneCarbonBio
  • Air Company (US) – Air Eau de Parfum
  • Avecom (BE) – Power To Protein
  • CleanO2 Carbon Capture Technologies (CA) – CleanO2 Soap
  • Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB (DE) – eBioCO2n Technology
  • Nordic Electrofuel (NO) – E-Fuel 1
24.02.2022

Renewable Carbon as a Guiding Principle for Sustainable Carbon Cycles

  • Renewable Carbon Initiative (RCI) published a strategy paper on the defossilisation of the chemical and material industry with eleven policy recommendations

The Renewable Carbon Initiative, an interest group of more than 30 companies from the wide field of the chemical and material value chains, was founded in 2020 to collaboratively enable the chemical and material industries to tackle the challenges in meeting the climate goals set by the European Union and the sustainability expectations held by societies around the globe.

RCI addresses the core of the climate problem: 72% of anthropogenic climate change is caused directly by extracted fossil carbon from the ground. In order to rapidly mitigate climate change and achieve our global ambition for greenhouse gas emission reductions, the inflow of further fossil carbon from the ground into our system must be reduced as quickly as possible and in large scale.

  • Renewable Carbon Initiative (RCI) published a strategy paper on the defossilisation of the chemical and material industry with eleven policy recommendations

The Renewable Carbon Initiative, an interest group of more than 30 companies from the wide field of the chemical and material value chains, was founded in 2020 to collaboratively enable the chemical and material industries to tackle the challenges in meeting the climate goals set by the European Union and the sustainability expectations held by societies around the globe.

RCI addresses the core of the climate problem: 72% of anthropogenic climate change is caused directly by extracted fossil carbon from the ground. In order to rapidly mitigate climate change and achieve our global ambition for greenhouse gas emission reductions, the inflow of further fossil carbon from the ground into our system must be reduced as quickly as possible and in large scale.

In the energy and transport sector, this means a vigorous and fast expansion of renewable energies, hydrogen and electromobility, the so-called decarbonisation of these sectors. The EU has already started pushing an ambitious agenda in this space and will continue to do so, for instance with the recently released ‘Fit for 55’ package.

However, these policies have so far largely ignored other industries that extract and use fossil carbon. The chemical and material industries have a high demand for carbon and are essentially only possible with carbon-based feedstocks, as most of their products cannot do without carbon. Unlike energy, these sectors cannot be “decarbonised”, as molecules will always need carbon. The equivalent to decarbonisation via renewable energy in the energy sector is the transition to renewable carbon in the chemical and derived materials industries. Both strategies avoid bringing additional fossil carbon from the ground into the cycle and can be summarised under the term “defossilisation”.

To decouple chemistry from fossil carbon, the key question is which non-fossil carbon sources can be used in the future. Rapid developments in biosciences and chemistry have unlocked novel, renewable and increasingly affordable sources of carbon, which provide us with alternative solutions for a more sustainable chemicals and materials sector. These alternative sources are: biomass, utilisation of CO2 and recycling. They are combined under the term “renewable carbon”. When used as a guiding principle, renewable carbon provides a clear goal to work towards with sufficient room to manoeuvre for the whole sector. It enables the industry to think out of the box of established boundaries and stop the influx of additional fossil carbon from the ground.

The systematic change to renewable carbon will not only require significant efforts from industry, but must be supported by policy measures, technology developments and major investments. In order to implement a rapid and high-volume transition away from fossil carbon, and to demonstrate its impact, a supportive policy framework is essential. The emphasis should be put on sourcing carbon responsibly and in a manner that does not adversely impact the wider planetary boundaries nor undermines societal foundations. An overarching carbon management strategy is required that also takes specific regional and application-related features into account, to identify the most sustainable carbon source from the renewable carbon family. This will allow for a proper organisation of the complex transition from today’s fossil carbon from the ground to renewable energy and to renewable carbon across all industrial sectors.

RCI has developed eleven concrete policy recommendations on renewable carbon, carbon management, support for the transformation of the existing chemical infrastructure and the transformation of biofuel plants into chemical suppliers. The policy paper “Renewable Carbon as a Guiding Principle for Sustainable Carbon Cycles” is freely available for download in both a short version and a long version.


Link for Download: https://renewable-carbon-initiative.com/media/library/

Source:

Renewable Carbon Initiative (RCI)

Photo: ANDRITZ
22.02.2022

ANDRITZ at Inlegmash 2022 in Russia

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

TEXTILE RECYCLING TECHNOLOGIES
ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending, and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses. ANDRITZ will present recycling technologies for end-of-life textile products that can be used in multiple applications, such as automotive, insulation, mattresses, and furniture felts.

Customer awareness and regulations are pushing apparel brands to recycle their textile waste and use the recycled textile fibers in their own products. To support ANDRITZ customers, a team with process know-how is available to conduct customized trials in our advanced technical center located at the ANDRITZ Laroche facilities in Cours, France.

BAST FIBERS
For the demanding Russian market for technologies based on bast fibers, ANDRITZ will present innovative products and the valorization of bast fibers, in particular hemp.
ANDRITZ Laroche is a player in the textile waste recycling sector, with airlay nonwoven technologies but also bast fiber decortication and cottonizing lines.

These eco-friendly fibers are used to spin yarn mixed with cotton, saving cotton as raw material, which reduces the consumption of water, pesticides applied in its cultivation and chemicals used during the dyeing and finishing processes.

More information:
Andritz Inlegmash nonwovens Recycling
Source:

ANDRITZ AG

22.02.2022

Baldwin partners with Blutec S.A. de C.V. to serve Mexico’s textile industry

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin’s precision spray systems for finishing and remoistening use non-contact spray technology to provide optimal controlled coverage of the exact amount of liquids needed to achieve the specific characteristics of the fabric—saving customers time, money and valuable resources. Because only the required amounts of water and chemicals are applied, water consumption can be reduced by up to 50%, contributing to considerably improved productivity in the finishing process.
In addition, these solutions can process a wide range of low-viscosity water-based chemicals—such as softeners, antimicrobial agents, durable water repellents, flame retardants and more—for woven fabrics, knitted textiles and nonwovens.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

(c) Archroma
01.02.2022

Archroma launches a new vegan textile softener

Archroma announced the launch of EARTH SOFT, a new softening system for textile and fashion applications, based on Archroma's latest innovation, a vegan silicone softener, Siligen® EH1, with 35% plant-based active content.

Siligen® EH1 is the latest addition in the plant-based innovations developed by Archroma in recent years, such as EarthColors® dyes and Appretan® NTR binders, as alternatives offered to manufacturers and brands looking to reduce the use of fossil fuel based ingredients without compromising performance.

The range has been developed in line with the principles of “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. More than 35% of the Siligen® EH1 softener's active content is based on plant-based, renewable raw materials. In addition, the product features ultralow cyclic siloxanes (D4, D5, D6) which are classified by the European Chemicals Agency as “Substances of Very High Concern” due to their very persistent and bioaccumulative properties.

Archroma announced the launch of EARTH SOFT, a new softening system for textile and fashion applications, based on Archroma's latest innovation, a vegan silicone softener, Siligen® EH1, with 35% plant-based active content.

Siligen® EH1 is the latest addition in the plant-based innovations developed by Archroma in recent years, such as EarthColors® dyes and Appretan® NTR binders, as alternatives offered to manufacturers and brands looking to reduce the use of fossil fuel based ingredients without compromising performance.

The range has been developed in line with the principles of “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. More than 35% of the Siligen® EH1 softener's active content is based on plant-based, renewable raw materials. In addition, the product features ultralow cyclic siloxanes (D4, D5, D6) which are classified by the European Chemicals Agency as “Substances of Very High Concern” due to their very persistent and bioaccumulative properties.

Siligen® EH1 is ideally suited for shirts, underwear, sportswear, towels, bed sheets, etc. as it provides an excellent wearing comfort by supporting a good moisture transportation and delivering a smooth and soft touch.

The new softener, and the EARTH SOFT system which also includes a Hydroperm® wicking agent to boost hydrophilic properties on synthetic and blended fibers, can be applied on all natural and synthetic textile fibers.

Siligen® EH1 is suitable for both woven and knitted articles. It can be applied by padding process, as well as by exhaust process as it shows a very good shear stability and a low foaming profile. It can be used on white articles and those treated with optical brighteners, as it doesn’t cause thermomigration nor phenolic yellowing.

Paul Cowell, Head of Competence Centers for Brand & Performance Textile Specialties at Archroma, comments: “The new EARTH SOFT system based on Siligen® EH1 softener adds to our growing portfolio of innovations based on natural and renewable plant-based resources. This new breakthrough innovation by Archroma helps us and our partners in the textile and fashion industry to minimize our dependence on petroleum fossil fuel products.”

Source:

Archroma

(c) Sitip
21.01.2022

Sitip presents COSMOPOLITAN Fashion-tech fabrics at Milano Unica

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

Source:

Sitip / Valeria Rastrelli