From the Sector

Reset
4 results
02.11.2021

Penn Textile Solutions setzt auf Prozesskontrolle von Mahlo

Penn Textile Solutions GmbH is one of the world's leading manufacturers of elastic fabrics for under-wear, corsetry, sportswear and swimwear, as well as highly functional textiles for technical applications. The fully integrated company with its own warping, circular knitting, warp knitting, dyeing and finishing facilities currently employs around 150 people.

Penn Textile Solutions GmbH is one of the world's leading manufacturers of elastic fabrics for under-wear, corsetry, sportswear and swimwear, as well as highly functional textiles for technical applications. The fully integrated company with its own warping, circular knitting, warp knitting, dyeing and finishing facilities currently employs around 150 people.

Penn has long relied on Mahlo
Penn has relied on the cooperation with Mahlo for years. The manufacturer of measuring, control and automation systems for web-shaped goods has decades of experience in the field of process control. Until the summer of 2020, the textile manufacturer had been using a basis weight measurement system in the stenter frame outlet with beta radiation and manual control. "When the krypton preparations had passed their half-life, we had to make a decision: Exchange or replace the system right away", says operations manager Franz Schütte. They sat down with Mahlo representatives and looked for the best solution. Since the systems had already reached a high operating age and the measurement was limited to the basis weight, a new concept was decided upon. "Mahlo made us the best price-performance offer." The new system should be even more efficient and easier to operate for the special makes..

The compression zones of the functional fabric create corresponding distortions within the textile surface in its raw state, which have to be smoothed out in the fixing process. This work is now taken over by a process control system. The Mahlo Famacont PMC-15 with two measuring points automatically controls the leading of the stenter frame by continuously and contactlessly determining the mesh density. In addition, the Patcontrol PCS-20 process control system ensures that the dimensions of the different zones are recorded and also automatically controlled. "The previous beta-radiation facility was not able to collect this kind of data," explains the Penn operations manager. Another important aspect for the textile manufacturer: the complete and costly radiation protection is no longer necessary with the new systems.

Despite very good experience with Mahlo in the past, every change naturally involves a risk. Penn did not have to rely on theoretical considerations, however, but carried out tests in advance with appropriate sample material in the Mahlo test laboratory. The results convinced the decision-makers.

Source:

Mahlo GmbH + Co. KG

13.10.2021

Mahlo at the Innovative Textile and Apparel Show

For the second time the Innovative Textile and Apparel Show opens its virtual fairground this year. For the second time, Mahlo takes the chance to get in contact with customers from all over the world. Mahlo will present the latest systems and solutions for efficient and high-quality textile production and finishing, with the focus on process optimisation in a digital environment.

In the textile industry, Mahlo is known for high-quality automatic weft straighteners, whether roller or needle straighteners, whether for the finest textiles or heavy fabrics - interested parties can find out about the right equipment for their specific requirements.

Process control systems such as the Patcontrol PCS for pattern recognition and the Famacont PMC for controlling weft and stitch course density also contribute to textile production and finishing. Mahlo wants to support manufacturers in optimising their production processes and thus also the end product in a cost-efficient way.

For the second time the Innovative Textile and Apparel Show opens its virtual fairground this year. For the second time, Mahlo takes the chance to get in contact with customers from all over the world. Mahlo will present the latest systems and solutions for efficient and high-quality textile production and finishing, with the focus on process optimisation in a digital environment.

In the textile industry, Mahlo is known for high-quality automatic weft straighteners, whether roller or needle straighteners, whether for the finest textiles or heavy fabrics - interested parties can find out about the right equipment for their specific requirements.

Process control systems such as the Patcontrol PCS for pattern recognition and the Famacont PMC for controlling weft and stitch course density also contribute to textile production and finishing. Mahlo wants to support manufacturers in optimising their production processes and thus also the end product in a cost-efficient way.

Solutions for technical textiles and nonwovens
Support in the production process is also available for technical textiles and nonwovens. The focus here is on the Qualiscan QMS quality measurement system. The modularly designed system, which consists of sensors and measuring frames, measures, logs and controls critical parameters such as basis weight, moisture or layer thickness across the entire fabric width. Depending on the application and task, different measuring methods are used for this purpose.

Source:

Mahlo GmbH + Co. KG

Launch of a new ISO certification standard (c) AMAC
Möcke + Mörschel + Effing
22.09.2021

Launch of a new ISO certification standard

Textechno reports launch of a new standard for the drapability and deformability of fabrics and non-wovens: ISO 21765

World market leader for precision testing equipment Textechno and their partner SAERTEX, global market leader in non-crimp fabrics (NCF) are proud to announce that the newly developed international standard ISO 21765:2020 to quantify material behaviour in terms of drapability and deformability was recently published by ISO.

The new standard ISO 21765 allows the world-wide comparable measurement of all relevant parameters regarding the deformability and drapability of all kinds of fabrics, including woven fabrics and NCFs as well as knitted fabrics and non-wovens on Textechno´s precision testing equipment DRAPETEST. This can be very useful in the carbon fibre recycling since one of the most efficient applications of recycled carbon fibres will be in non-wovens.

This is the first testing instrument world-wide to quantify not only the force which is required for deforming a fabric, but also the various defects such as gaps, undulation, or wrinkles which can arise due to the deformation.

Textechno reports launch of a new standard for the drapability and deformability of fabrics and non-wovens: ISO 21765

World market leader for precision testing equipment Textechno and their partner SAERTEX, global market leader in non-crimp fabrics (NCF) are proud to announce that the newly developed international standard ISO 21765:2020 to quantify material behaviour in terms of drapability and deformability was recently published by ISO.

The new standard ISO 21765 allows the world-wide comparable measurement of all relevant parameters regarding the deformability and drapability of all kinds of fabrics, including woven fabrics and NCFs as well as knitted fabrics and non-wovens on Textechno´s precision testing equipment DRAPETEST. This can be very useful in the carbon fibre recycling since one of the most efficient applications of recycled carbon fibres will be in non-wovens.

This is the first testing instrument world-wide to quantify not only the force which is required for deforming a fabric, but also the various defects such as gaps, undulation, or wrinkles which can arise due to the deformation.

In the frame of a publicly funded project which started in 2011, Textechno developed the award-winning automatic drapability tester DRAPETEST along with other partners, amongst them SAERTEX.  

Dietmar Möcke, CTO at SAERTEX says: „With ISO 21765, we finally have a standardized testing method with world-wide validity. It allows us to provide our customers with comparable and reproducible measurement values regarding the draping characteristics of our products.”

Ulrich Mörschel, Managing Director of Textechno adds: “We are grateful for the support from all around the world allowing us to establish the new ISO standard. The standard finally fills a gap in the testing methods for fabrics both in the fields of textiles and composites.”

Dr. Michael Effing, Managing Director of AMAC GmbH and Senior Advisor to Textechno: “A lot of research is dedicated to new production technologies of composites, non-crimp fabrics and classical fabrics for thermosets have with 33 % a significant market share in the production of all composite materials. The application of the new standard for non-wovens from recycled carbon fibres comes perfectly on time for this market sector which will gain more and more importance within the next years.

Source:

AMAC GmbH

Dibella's initiative to reduce carbon dioxide emissions (c) Heppner
16.07.2021

Dibella's initiative to reduce carbon dioxide emissions

Dibella's long-standing forwarding partner Hamacher was taken over by the sustainably committed logistics specialist Heppner at the end of 2018. The new constellation takes Dibella another step further in terms of climate-neutral transport: the logistics company, which originates from France, focuses on the environmentally friendly transport of goods and is investing heavily in a carbon dioxide-neutral vehicle fleet.

Dibella's long-standing forwarding partner Hamacher was taken over by the sustainably committed logistics specialist Heppner at the end of 2018. The new constellation takes Dibella another step further in terms of climate-neutral transport: the logistics company, which originates from France, focuses on the environmentally friendly transport of goods and is investing heavily in a carbon dioxide-neutral vehicle fleet.

"With our first sustainability report, we introduced the monitoring of our carbon dioxide emissions. It turned out that the transport of our textiles produces the most climate gases. We have therefore consistently switched to sea freight and almost without exception do not ship goods by air. However, we still see a need for optimisation from the port of Rotterdam to the customer or to our warehouse. After the takeover of our long-standing forwarding partner Hamacher by the logistics specialist Heppner, there is now a breath of fresh air in our climate-friendly delivery initiative. The company is committed to environmentally friendly transports and a low-emission vehicle fleet. Together we now want to look for solutions to make the "last miles" of our deliveries climate gas neutral," says Ralf Hellmann, Managing Director of Dibella.

Departure into a clean future
Spedition Heppner, with its origins in Alsace, is a family-owned company with worldwide operations and 3,320 employees handling more than 72 million freight items annually. More than a decade ago, the logistics specialist began recording the carbon dioxide emissions released by its fleet of vehicles and steadily reducing them by switching to environmentally friendly energy sources. With a mix of gas, bio-fuel and electric drive, the discharge of greenhouse gases caused by the company's trucks is to be reduced by twenty percent by the year 2025. By 2050, the entire fleet should be diesel-free. To achieve a carbon dioxide-neutral footprint, Heppner is also testing hybrid forms of transport (rail, inland waterways, truck) as well as alternative delivery options (cargo bike).

Source:

Dibella GmbH