From the Sector

Reset
65 results
Professor Dr.-Ing. Markus Milwich Photo: DITF
Professor Dr.-Ing. Markus Milwich.
19.03.2024

Markus Milwich represents "Lightweight Design Agency for Baden-Württemberg"

Lightweight design is a key enabler for addressing the energy transition and sustainable economy. Following the liquidation of the state agency Leichtbau BW GmbH, a consortium consisting of the Allianz Faserbasierter Werkstoffe Baden-Württtemberg (AFBW), the Leichtbauzentrum Baden-Württemberg (LBZ e.V. -BW) and Composites United Baden-Württemberg (CU BW) now represents the interests of the lightweight construction community in the State.

The Lightweight Design Agency for Baden-Württemberg is set up for this purpose on behalf of and with the support of the State. The Lightweight Construction Alliance BW is the central point of contact for all players in the field of lightweight construction in the State and acts in their interests at national and international level. Professor Markus Milwich from the German Institutes of Textile and Fiber Research Denkendorf (DITF) represents the agency.

Lightweight design is a key enabler for addressing the energy transition and sustainable economy. Following the liquidation of the state agency Leichtbau BW GmbH, a consortium consisting of the Allianz Faserbasierter Werkstoffe Baden-Württtemberg (AFBW), the Leichtbauzentrum Baden-Württemberg (LBZ e.V. -BW) and Composites United Baden-Württemberg (CU BW) now represents the interests of the lightweight construction community in the State.

The Lightweight Design Agency for Baden-Württemberg is set up for this purpose on behalf of and with the support of the State. The Lightweight Construction Alliance BW is the central point of contact for all players in the field of lightweight construction in the State and acts in their interests at national and international level. Professor Markus Milwich from the German Institutes of Textile and Fiber Research Denkendorf (DITF) represents the agency.

The use of lightweight materials in combination with new production technologies will significantly reduce energy consumption in transportation, the manufacturing industry and the construction sector. Resources can be saved through the use of new materials. As a cross-functional technology, lightweight construction covers entire value chain from production and use to recycling and reuse.

The aim of the state government is to establish Baden-Württemberg as a leading provider of innovative lightweight construction technologies in order to strengthen the local economy and secure high-quality jobs.

Among others, the "Lightweight Construction Alliance Baden-Württemberg" will continue the nationally renowned "Lightweight Construction Day", which acts as an important source of inspiration for a wide range of lightweight construction topics among business and scientific community.

Professor Milwich, an expert with many years of experience and an excellent network beyond the State's borders, has been recruited for this task. In his role, Milwich also represents the state of Baden-Württemberg on the Strategy Advisory Board of the Lightweight Construction Initiative of the Federal Ministry for Economic Affairs and Climate Action, which supports the cross functional-technology and efficient transfer of knowledge between the various nationwide players in lightweight construction and serves as a central point of contact for entrepreneurs nationwide for all relevant questions.

From 2005 to 2020, Professor Milwich headed the Composite Technology research at the DITF, which was integrated into the Competence Center Polymers and Fiber Composites in 2020. He is also an honorary professor at Reutlingen University, where he teaches hybrid materials and composites. "Lightweight design is an essential aspect for sustainability, environmental and resource conservation. I always showcase this in research and teaching and now also as a representative of the lightweight construction community in Baden-Württemberg," emphasizes Professor Milwich.

Source:

Deutsche Institute für Textil- und Faserforschung

German Design Award 2024: Rat für Formgebung gibt Gewinner*innen bekannt (c) Rat für Formgebung
06.12.2023

German Design Award 2024: Rat für Formgebung gibt Gewinner*innen bekannt

Die internationale Jury hat gewählt: Insgesamt 65-mal wurde die Auszeichnung „Gold“ in den Disziplinen „Excellent Product Design“, „Excellent Communications Design“ und „Excellent Architecture“ beim German Design Award 2024 vergeben. Alle Gewinner*innen werden im Rahmen der Award Show am 26. Januar 2024 in Frankfurt am Main geehrt. Zu diesem Anlass wird auch bekannt gegeben, wer die Auszeichnung „German Design Award Newcomer“ gewinnt. Mit dem German Design Award prämiert der Rat für Formgebung Gestaltungstrends sowie innovative Designleistungen, die alle Bereiche des täglichen Lebens und die Vielfalt der Designkultur abdecken.

Die internationale Jury hat gewählt: Insgesamt 65-mal wurde die Auszeichnung „Gold“ in den Disziplinen „Excellent Product Design“, „Excellent Communications Design“ und „Excellent Architecture“ beim German Design Award 2024 vergeben. Alle Gewinner*innen werden im Rahmen der Award Show am 26. Januar 2024 in Frankfurt am Main geehrt. Zu diesem Anlass wird auch bekannt gegeben, wer die Auszeichnung „German Design Award Newcomer“ gewinnt. Mit dem German Design Award prämiert der Rat für Formgebung Gestaltungstrends sowie innovative Designleistungen, die alle Bereiche des täglichen Lebens und die Vielfalt der Designkultur abdecken.

Innovative Produkte, nachhaltige Lösungen und State-of-the-Art im Design – der German Design Award geht an Unternehmen, deren Produkte und Projekte in den drei Award-Disziplinen „Excellent Product Design“, „Excellent Communications Design“ und „Excellent Architecture“ überzeugen. Auszeichnungen wurden in diesem Jahr an 55 Nationen in 68 Kategorien vergeben, neben „Winner“ und „Special Mention“ insgesamt 65-mal über alle Disziplinen hinweg die höchste Auszeichnung „Gold“. Immer stärker im Fokus stehen dabei Transformationsthemen: Wie können Produkte umweltfreundlicher gestaltet, Nutzungserlebnisse optimiert, Prozesse effizienter und unsere Lebenswelt gerechter werden?

Unter den Auszeichnungen in der Disziplin „Excellent Communications Design“ sind in diesem Jahr insbesondere die Kategorie „Brand Identity“, „Corporate Identy“  sowie „Event“ stark vertreten. In „Excellent Product Design“ haben die Kategorien „Medical/Health Care“ und „Sports/Outdoor Activities“ herausragende Einreichungen zu verzeichnen. Daneben stechen diejenigen Kategorien hervor, die sich um die Gestaltung des Zuhauses drehen – von „Outdoor Living“ hin zu „Furniture“ und „Kitchen“ über „Bath & Wellness“. Dieser Trend setzt sich in der Disziplin „Excellent Architecture“ fort: Neben Architekturprojekten ist es die Kategorie „Interior Architecture“, die die meisten Auszeichnungen hervorgebracht hat.

Eine vollständige Übersicht über aller Gewinner*innen und Kategorien erhalten Sie zum Download hier.

Source:

Rat für Formgebung - German Design Council

German Design Award 2024: Newcomer Finalist*innen (c) Rat für Formgebung Service GmbH
08.11.2023

German Design Award 2024: Newcomer Finalist*innen

Die Jury des German Design Award 2024 hat die fünf Finalist*innen für die Auszeichnung „Newcomer“ ausgewählt: Leonie Burkhardt, Justus Hilfenhaus, Nicolas König, das studio formagora (Finn Blankenberg, Esra Heuermann, Nick Potter) und Sebastian Winter haben die Jury mit ihren Portfolios aus den Disziplinen Textildesign, Produktdesign, Architektur, Partizipatives Design und Digital Design überzeugt. Mit innovativen Lösungen für aktuelle soziale wie ökologische Fragestellungen und zukunftsweisenden Ideen, Projekten und Produkten auf hohem Niveau beweisen sie, welch entscheidende Rolle jungen Designtalenten für die erfolgreichen Transformationsprozesse unserer Zeit zukommt.

Die Jury des German Design Award 2024 hat die fünf Finalist*innen für die Auszeichnung „Newcomer“ ausgewählt: Leonie Burkhardt, Justus Hilfenhaus, Nicolas König, das studio formagora (Finn Blankenberg, Esra Heuermann, Nick Potter) und Sebastian Winter haben die Jury mit ihren Portfolios aus den Disziplinen Textildesign, Produktdesign, Architektur, Partizipatives Design und Digital Design überzeugt. Mit innovativen Lösungen für aktuelle soziale wie ökologische Fragestellungen und zukunftsweisenden Ideen, Projekten und Produkten auf hohem Niveau beweisen sie, welch entscheidende Rolle jungen Designtalenten für die erfolgreichen Transformationsprozesse unserer Zeit zukommt.

Der Award belegt damit die Bedeutung von jungem Design für die Wettbewerbs- und Zukunftsfähigkeit mittelständischer Unternehmen und der (deutschen) Wirtschaft – als Motoren der Weiterentwicklung sind Jungdesigner*innen mit ihren Future Skills für deren Innovationskompetenz maßgeblich. Kollaboratives Arbeiten, interdisziplinärer Austausch, Offenheit, Experimentierfreude und Forschergeist ziehen sich durch die Portfolios der Finalist*innen. Sie alle setzen sich mit Chancen von Veränderungen auseinander, reagieren auf eine sich immer schneller wandelnde Welt, arbeiten sowohl konzeptionell als auch experimentell und wagen sich an spielerische Lösungen für komplexe Herausforderungen. Die große inhaltliche Bandbreite, Diversität an Perspektiven und deren jeweilige Umsetzung in die Praxis hat die Jury des German Design Award 2024 überzeugt. Sie erhalten die Chance auf die mit 15.000 Euro dotierte Auszeichnung des German Design Award, die am 26. Januar 2024 in Frankfurt am Main vergeben wird.

Mit der Auszeichnung stärkt die Stiftung Rat für Formgebung die Sichtbarkeit junger Designer*innen durch die Möglichkeit, sich und ihre Arbeiten der internationalen Design-Community, Industrie und Wirtschaft sowie der Öffentlichkeit zu präsentieren. In einer Reihe von exklusiven Anlässen des Rat für Formgebung haben die Finalist*innen zudem Gelegenheit, Mitglieder der Stiftung Rat für Formgebung kennenzulernen und wichtige Wirtschaftskontakte zu knüpfen. Zu den ehemaligen Preisträger*innen gehören zahlreiche heute namhafte Designer*innen wie Eva Marguerre, Marcel Besau, Sebastian Herkner und Christian Zanzotti.

More information:
German Design Award Design
Source:

Rat für Formgebung Service GmbH / German Design Council

Manel Echevarria Photo Ananas Anam
Manel Echevarria
06.09.2023

Ananas Anam: Manel Echevarria new CEO

Ananas Anam, the provider of innovative low-impact textile solutions made from pineapple leaf waste, announced the appointment of Manel Echevarria as the new CEO. The Spanish executive who had previously worked as CEO for Grupo Excens Sports and Lacoste Iberia, as well as in senior executive roles for Swarovski and MontBlanc, will lead the global business from its European research and production site near Barcelona in Spain.

At the beginning of the year, the company reported the successful closing of a funding round led by HALTRA Group, a family-backed sustainable investment firm in Luxembourg and a group of strategic investors, including the French Compagnie Fruitière, one of the leading producers in Europe and major fruit producer in the Africa-Caribbean-Pacific region, as well the global automotive technology supplier Forvia, and Asahi Kasei Corp, a leading Japanese multinational group working in innovative materials and technologies.

Ananas Anam, the provider of innovative low-impact textile solutions made from pineapple leaf waste, announced the appointment of Manel Echevarria as the new CEO. The Spanish executive who had previously worked as CEO for Grupo Excens Sports and Lacoste Iberia, as well as in senior executive roles for Swarovski and MontBlanc, will lead the global business from its European research and production site near Barcelona in Spain.

At the beginning of the year, the company reported the successful closing of a funding round led by HALTRA Group, a family-backed sustainable investment firm in Luxembourg and a group of strategic investors, including the French Compagnie Fruitière, one of the leading producers in Europe and major fruit producer in the Africa-Caribbean-Pacific region, as well the global automotive technology supplier Forvia, and Asahi Kasei Corp, a leading Japanese multinational group working in innovative materials and technologies.

“The appointment of Manel Echevarria as a seasoned CEO with an impressive track-record in the fashion and luxury industry marks another important milestone in setting Ananas Anam up for the next phase of growth” says Dr. Christian Kurtzke, Chairman of Ananas Anam. “Following our investment in the development of an impressive portfolio of next-generation innovative biodegradable, traceable and sustainable materials, and into the setup of its network of strategic partners on the supply and shareholder side, Manel will provide the leadership for driving growth and industrial scale of this pioneering sustainability brand amidst a continued challenging global market environment in fashion, interiors and automotive.”

With Ananas Anam’s core portfolio of innovative materials, the company has successfully collaborated with well-known brands including Nike, Hugo Boss, H&M, Paul Smith and Cat Footwear and sustainable-fashion pioneers like Ecoalf to drive innovation in footwear, as well as with fashion brands like Carolina Herrera in the area of bags and accessories, substituting animal leather in the product design with its vegan, cruelty-free, low-impact and sustainable pineapple leaf fibre based textiles. In July 2023, at the Premiere Vision exhibition in Paris, the company presented the next generation of Piñatex as well as its breakthrough innovation Piñayarn as a biodegradable, traceable and sustainable yarn, and introducing Anam PALF, as a commercially available premium textile grade pineapple leaf fibre, opening up a world of new applications and markets.

“Driving the sustainability transformation in fashion, as well as in interiors and automotive has become a key priority on the agenda of brands and OEMs around the world,” says Manel Echevarria, CEO Ananas Anam. “I am proud to have the opportunity to lead the company in this decisive time, and I am looking forward to collaborating with our exceptional Spanish founder, Dr Carmen Hijosa, and Josep Taylor in Spain, with Bruno de Penanster and his team in the UK, as well as with Chuck Lazaro and his team in the Philippines to turn this amazing sustainability ambition and purpose into a reality.”

Source:

Ananas Anam

Iluna Group AW 24/25 collection inspired by three FOREVER ICONS (c) Iluna Group
24.07.2023

Iluna Group AW 24/25 collection inspired by three FOREVER ICONS

Three strong women, each different from the other, but who have managed to leave their mark on the history and evolution of the female role, and despite living in different eras, have left an indelible mark on society: Madame De Pompadour, nicknamed Reinette, the favourite of King Louis XV, Luisa Amman, called Corè by the great poet Gabriele D'Annunzio, and the iconic Vivienne Westwood, Miss Viv.
The three women are the FOREVER ICONS chosen and celebrated Iluna, where each woman becomes the protagonist of a “traveling exhibition” that will accompany Iluna between events and fairs.

Reinette
The nickname "Reinette" belonged to Madame De Pompadour, the favourite of King Louis XV. She had a significant influence in politics, arts, and fashion, shaping the style of the first half of the 18th century. Beauty and grace are represented in a floral theme, featuring small romantic details that become opulent with the use of lurex and golden cords. The color palette is soft, muted, and powderyry.

Three strong women, each different from the other, but who have managed to leave their mark on the history and evolution of the female role, and despite living in different eras, have left an indelible mark on society: Madame De Pompadour, nicknamed Reinette, the favourite of King Louis XV, Luisa Amman, called Corè by the great poet Gabriele D'Annunzio, and the iconic Vivienne Westwood, Miss Viv.
The three women are the FOREVER ICONS chosen and celebrated Iluna, where each woman becomes the protagonist of a “traveling exhibition” that will accompany Iluna between events and fairs.

Reinette
The nickname "Reinette" belonged to Madame De Pompadour, the favourite of King Louis XV. She had a significant influence in politics, arts, and fashion, shaping the style of the first half of the 18th century. Beauty and grace are represented in a floral theme, featuring small romantic details that become opulent with the use of lurex and golden cords. The color palette is soft, muted, and powderyry.

Corè
Luisa Amman, born in the late 19th century into a wealthy bourgeois family, married at a young age and became Marchesa Casati. "Corè" is the endearing nickname given to her by her lover Gabriele D'Annunzio, inspired by Kore, the Queen of the Underworld. She was a patron of the arts, an eccentric and transgressive collector. This theme celebrates opulence, from peacock feathers to Liberty-style designs in deep colours and warm metallic glimmers. An innovative proposal for the theme is the pleating technique, achieved directly in the weaving process of the Ultralight jacquardtronic laces.

Miss Viv
Vivienne Westwood, an extraordinary protagonist with an intense and irreverent life. Her insights have forever marked fashion and transformed the general standards of dressing. Rock and rebellious, she drew inspiration from street trends, anticipating avant-garde movements. In the 1990s, she brought back Tartan, mixing it with sensual roses in a maximalism that went against the prevailing trends, featuring vibrant colours. At the beginning of the third millennium, she grasped the importance of preserving the planet and left us with a motto that is more urgent and relevant than ever: "Buy Less, Choose Well, Make it Last." Within this theme, there is a new GRS-certified print that saves water, applied to ultra-fine Lurex nets, which are also certified.

Source:

Iluna Group

(c) PIERO D’ANGELO / C.L.A.S.S.
22.05.2023

Project "Grow Your Own Couture" by Piero D’angelo wins IMAGINING SUSTAINABLE FASHION AWARD 2023

“Grow Your Couture” by Piero D'angelo, the winning project of the IMAGINING SUSTAINABLE FASHION (ISFA) competition was announced during a webinar broadcast on 18 May attended by Giusy Bettoni CEO of C.L.A.S.S. Eco Hub, Anna Detheridge President of Connecting Cultures and ISFA ambassadors Valentina Suarez, co-founder and CEO of Universo Mola and Vishal Tolambia winner of the 2022 edition.
 
Piero D'angelo's project was the best among the 110 proposals received after the international call for proposals launched on 27 October 2022.
 

“Grow Your Couture” by Piero D'angelo, the winning project of the IMAGINING SUSTAINABLE FASHION (ISFA) competition was announced during a webinar broadcast on 18 May attended by Giusy Bettoni CEO of C.L.A.S.S. Eco Hub, Anna Detheridge President of Connecting Cultures and ISFA ambassadors Valentina Suarez, co-founder and CEO of Universo Mola and Vishal Tolambia winner of the 2022 edition.
 
Piero D'angelo's project was the best among the 110 proposals received after the international call for proposals launched on 27 October 2022.
 
Piero D'Angelo, 36, a graduate in Fashion Womenswear from the Royal College of Art in London and in Textile Design from Central Saint Martins, is a Fashion and Textile Designer with a research focus on biotechnology in the fashion industry. In 2022 he founded his Fashion & Textile Design studio experimenting with a multidisciplinary approach on the importance of natural materials and Biodesign. From 2018 to 2022 Piero D'Angelo was a resident and then Product Researcher & Developer at Open Cell (Biotech Research Park), a biotech start-up community in London. He was awarded the Dorothy Waxman Textile Design Prize in 2015 and semi-finalist for the LVMH Prize in 2020.
 
In his communication project, 'Grow Your Own Couture' D'Angelo imagines a future scenario where it will be possible to grow one's own clothes through living organisms such as lichens that are able to absorb pollution. But the project also wants to communicate a return to nature and above all care and protection towards it. In fact, the user is not simply a user of fashion, but through a kit is part of the process of growth, care and creation of the garment, thus abandoning the traditional paradigms of fashion. The project wants to completely re-imagine the way fashion could be designed, produced and used, proposing not only a product, but also a system that wants to collaborate with nature instead of polluting or exploiting it.

Source:

C.L.A.S.S.

16.05.2023

Change of management at ERWO Holding AG and Hoftex Group AG

Klaus Steger (64), CEO of ERWO Holding AG (“ERWO Holding”) and Hoftex Group AG (“Hoftex Group”), will step down from the Management Board of both companies at the beginning of 2024 in accordance with internal policies of the family and the company regarding the retirement age. Already on June 30, 2023, ERWO Holding Management Board member Hans-Georg von Schuh will retire as planned. ERWO Holding Management Board member Manfred Heinrich will also leave the Board as planned at this time and will continue to hold his mandate as one of the managing directors in the Südwolle Group together with Stéphane Thouvay and Johannes Rauch.

Steger’s designated successor as CEO of both companies is Manuela Spörl (50), currently CFO of ERWO Holding and also CFO of Hoftex Group. Hoftex Group is a group of medium-sized companies in the textile industry, in which ERWO Holding holds a significant stake. In addition, ERWO Holding acts as the parent company of the Südwolle Group, in which the Group’s worsted yarn activities are bundled.

Klaus Steger (64), CEO of ERWO Holding AG (“ERWO Holding”) and Hoftex Group AG (“Hoftex Group”), will step down from the Management Board of both companies at the beginning of 2024 in accordance with internal policies of the family and the company regarding the retirement age. Already on June 30, 2023, ERWO Holding Management Board member Hans-Georg von Schuh will retire as planned. ERWO Holding Management Board member Manfred Heinrich will also leave the Board as planned at this time and will continue to hold his mandate as one of the managing directors in the Südwolle Group together with Stéphane Thouvay and Johannes Rauch.

Steger’s designated successor as CEO of both companies is Manuela Spörl (50), currently CFO of ERWO Holding and also CFO of Hoftex Group. Hoftex Group is a group of medium-sized companies in the textile industry, in which ERWO Holding holds a significant stake. In addition, ERWO Holding acts as the parent company of the Südwolle Group, in which the Group’s worsted yarn activities are bundled.

Spörl has a degree in business administration and has been working for Hoftex Group since 2000. Her professional career began in the Corporate Controlling department, and in 2012 she was appointed as an advisor to the Board of Management. She was granted power of attorney in 2015, followed by appointments as CFO of the Hoftex Group in 2020 and CFO of the ERWO Group in 2022. A search for a successor for Spörl in the position of CFO of the Hoftex Group and, subsequently, of ERWO Holding is currently underway. Until the new CFO takes office, the two members of the Management Board, together with the Supervisory Board, will ensure an orderly transition.

The announced change in the Management Board of ERWO Holding, which acts as the parent company of the Südwolle Group, also ensures continuity at the leading manufacturer of worsted yarns for weaving, circular and flat knitting products in pure wool and wool blends. In the future, the management of Südwolle Group will continue to consist of the longstanding members Manfred Heinrich (Technology, Production & Planning), Johannes Rauch (Finance & Controlling) and Stéphane Thouvay (Sales & Marketing and Product Management & Innovation). Together with the designated board member of the parent company ERWO Holding, they will continue the successful development of the Südwolle Group from a mere supplier to a strategic partner of its customers as well as the growth trend of recent years.

The founding family Steger remains involved in the various supervisory bodies of the group of companies and will continue to work closely with them as the sole shareholder of ERWO Holding.

Source:

ERWO Holding AG

(c) INDA
10.05.2023

Four Nonwoven Industry Professionals honored with INDA Lifetime Awards

NDA, the Association of the Nonwoven Fabrics Industry, announced four recipients for the Lifetime Service Award and Lifetime Technical Achievement Awards. Jan O’Regan, Seshadri Ramkumar, Jim Robinson, and Ed Thomas are being recognized for their key contributions to the growth of the nonwovens industry and INDA.

NDA, the Association of the Nonwoven Fabrics Industry, announced four recipients for the Lifetime Service Award and Lifetime Technical Achievement Awards. Jan O’Regan, Seshadri Ramkumar, Jim Robinson, and Ed Thomas are being recognized for their key contributions to the growth of the nonwovens industry and INDA.

Jan O’Regan: INDA Lifetime Service Award
Jan O’Regan was the Director, Strategic Initiatives and Nonwovens Marketing, for Cotton Incorporated and retired in 2022. In this capacity, she uncovered new opportunities for cotton to bring value into the nonwovens industry. Her work included leading efforts in strategic planning, technical and market project management, and sharing new ideas and results with the global supply chain.
O’Regan spent over four decades in the nonwovens industry in various roles, including sales, marketing, strategic planning and business management. Market responsibilities included consumer and industrial markets on regional, national, and global teams. Over the most recent years, she applied these broad experiences to new markets for cotton in nontraditional applications.
Serving and volunteering with INDA for decades, O’Regan most recently chaired the World of Wipes® committee, which she efficiently organized to produce innovative conferences for the wipes industry.  She was a frequent speaker at INDA, INSIGHT, EDANA, and other events, and for nearly two decades was a go to source of information for cotton fibers in nonwovens and hygiene. O’Regan earned a BS in Textiles and Business, summa cum laude, from Penn State University and an MBA from New York University’s Stern School of Business.

Seshadri Ramkumar: INDA Lifetime Technical Achievement Award
Seshadri Ramkumar has over twenty-five years of experience within the technical nonwovens space, conducting industry leading research and educating nonwovens professionals at Texas Tech University (TTU).  At TTU, he established the Nonwovens Laboratory. Many of Ramkumar’s students have gone on to become technical leaders within their organizations and the nonwovens industry.
Ramkumar has numerous patent and invention disclosures, including Fibertect® toxic chemical decontamination wipes which have been recognized by the American Chemical Society as a notable success of federally supported innovation, endorsed by Lawrence Livermore National Laboratory, and adopted by multiple branches of the military.
In addition to many peer-reviewed publications, articles, and columns collectively over 500, including one on nanofibers that has been cited over 2,100 times, Ramkumar has contributed his expertise on the editorial boards of multiple fiber, nonwoven, and textile journals. Ramkumar has also organized conferences for nonwovens and textiles and actively promoted INDA and its technical training offerings for over 20 years.
He is a longtime member of the INDA Technical Advisory Board, been recognized by TAPPI, Society of Dyers and Colorists (UK), the Textile Institute (UK), and the Textile Association (INDIA), and received numerous awards from TTU.
Ramkumar holds a Bachelors of Technology (Textiles), Graduated with Distinction, and a Masters of Technology (Textiles), University First Rank in the Discipline, Anna University, and a Ph.D. (Textile Materials) from the University of Leeds, UK.

Jim Robinson: INDA Lifetime Technical Achievement Award
Jim Robinson has 33 years in the absorbent hygiene industry, including 28 years as a Technical Service Manager at BASF. He led technical teams that focused on the application of superabsorbent polymers (SAP) in hygiene products. Robinson has extensive knowledge of SAP applications, absorbent core formation, and hygiene article design, performance and testing. While with BASF, Robinson led efforts with multiple external companies to provide co-supplier solutions to hygiene converters.
Robinson’s extensive understanding of test methods and test method development led to his coordinating the establishment of fitness for use standards of adult incontinent products with the National Association for Continence and involvement in development and review of absorbent product test methods with INDA/EDANA. He is also an active contributor to INDA’s Technical Advisory Board and Hygienix organizing committee and was a contributing developer in establishing the INDA Absorbent Hygiene Training Course. Robinson has provided numerous presentations at INSIGHT, Hygienix, and RISE on performance and interactions of absorbent system components.
Recently, Robinson has been consulting and contributing to the success of multiple start-ups including those having been nominated for INDA product awards. Robinson has a BS in Chemistry from Hampden-Sydney College and an MS in Chemistry from Duke University.

Ed Thomas: INDA Lifetime Technical Achievement Award
Ed Thomas retired after 39 years, with 32 years in the nonwovens industry, and has remained active teaching the Intermediate Nonwovens Training Course for INDA and The Nonwovens Institute at North Carolina State University, as well as providing consulting services to the industry.
Thomas’ experience includes Process Engineering Manager and Plant Management, DuPont; Technical Director, Reemay; VP of Research and Operations, VP of Operations and Technology, and Global VP of Research and Development for Fiberweb/BBA Nonwovens; and Head of Research and Product Development, First Quality Nonwovens.
Thomas holds 10 U.S. nonwoven patents and he and his teams have been awarded more than 250 patents for numerous and diverse innovations that have played significant roles in the success of the nonwovens industry. These include applications for the global hygiene market, industrial nonwovens, and filtration media.
During his career, Thomas has presented several keynote addresses and papers to industry conferences, participated in North Carolina State University’s Nonwovens Cooperative Research Center (NCRC) prior to it becoming The Nonwovens Institute (NWI), INDA’s Technical Advisory Board, INDA’s Sustainability Committee, and was Vice Chair of NWI’s Industrial Advisory Board prior to retirement and remains an Emeritus member.
Thomas received his mechanical engineering degree from SUNY Buffalo.

Photo PCMC
02.04.2023

PCMC names Windell McGill as Product Launch Manager

Paper Converting Machine Company (PCMC)—which specializes in the design and manufacture of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries worldwide—announced that Windell McGill has joined the organization as the Product Launch Manager for its print business segment.

Bringing more than 25 years of print industry experience to PCMC, McGill will oversee product management, product launch and brand expansion for all PCMC print products and services.

Prior to joining PCMC, McGill was Managing Partner of ePac Atlanta, a provider of custom, high-quality flexible packaging solutions and digital printing services. Before that, he served as Business Segment Manager for flexible packaging at HP Indigo. McGill’s extensive experience also includes more than 15 years with Advanced Vision Technology, a provider of camera-based inspection equipment for the packaging market, where he held a variety of sales roles before being named President-Americas.

McGill will operate from his office in Atlanta.

Paper Converting Machine Company (PCMC)—which specializes in the design and manufacture of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries worldwide—announced that Windell McGill has joined the organization as the Product Launch Manager for its print business segment.

Bringing more than 25 years of print industry experience to PCMC, McGill will oversee product management, product launch and brand expansion for all PCMC print products and services.

Prior to joining PCMC, McGill was Managing Partner of ePac Atlanta, a provider of custom, high-quality flexible packaging solutions and digital printing services. Before that, he served as Business Segment Manager for flexible packaging at HP Indigo. McGill’s extensive experience also includes more than 15 years with Advanced Vision Technology, a provider of camera-based inspection equipment for the packaging market, where he held a variety of sales roles before being named President-Americas.

McGill will operate from his office in Atlanta.

Source:

PAPER CONVERTING MACHINE COMPANY (PCMC)

13.01.2023

DyStar: Global market changes cause leadership adaptions

Yalin Xu has been appointed Managing Director and President of DyStar Group by the Board of Directors. He will be directly responsible for the management and operations of DyStar Group. Mr Xu first joined DyStar in 2010 and has since been the Executive Board Director.
 
Eric Hopmann has been redesignated as CCO (Chief Commercial Officer), with a focus on Sales and Marketing of DyStar Group. He will continue to report to Yalin Xu. Mr Hopmann was with DyStar when the company started in 1995 and has been leading various leadership positions at DyStar Group, including the most recent CEO role, to which he was appointed in 2014.
 
DyStar’s leadership change is in response to the rapid global market changes, and to enable the group to accelerate growth and drive productivity. The group wants to streamline their operations and better utilise resources efficiently across the network.

Yalin Xu has been appointed Managing Director and President of DyStar Group by the Board of Directors. He will be directly responsible for the management and operations of DyStar Group. Mr Xu first joined DyStar in 2010 and has since been the Executive Board Director.
 
Eric Hopmann has been redesignated as CCO (Chief Commercial Officer), with a focus on Sales and Marketing of DyStar Group. He will continue to report to Yalin Xu. Mr Hopmann was with DyStar when the company started in 1995 and has been leading various leadership positions at DyStar Group, including the most recent CEO role, to which he was appointed in 2014.
 
DyStar’s leadership change is in response to the rapid global market changes, and to enable the group to accelerate growth and drive productivity. The group wants to streamline their operations and better utilise resources efficiently across the network.

More information:
DyStar
Source:

DyStar Singapore Pte Ltd

© ITM/TU Dresden
Woven hemisphere for usage in radome antennaes
15.12.2022

AVK Innovation Award 2022 to young engineers from ITM at TU Dresden

  • Award for near-net-shape 3D meshes for use in fibre-reinforced plastics

As part of the JEC FORUM DACH 2022, the AVK Innovation Awards were presented in Augsburg on November 29th. The innovation price in the category "Research/Science" (first place) was awarded to the team of scientists Dipl.-Ing. Dominik Nuss, Dr.-Ing. Cornelia Sennewald and Prof. Dr.-Ing. habil. Chokri Cherif.

With the development of the pull-off-free Jacquard weaving technology including the technological know-how in the field of highly complex 2D and 3D fabric geometries, which has been established at the ITM of the TU Dresden for many years, Dominik Nuss has succeeded in including different yarn lengths locally into the fabric structure solely through targeted variation of the fabric weave. There-fore, it is now possible to produce completely new types of fabrics without additional draping, especially spherically curved fabrics, but also large-format spiral or even curved fabrics. The fact that the required near-net-shape geometry of the component to be reinforced can be reproduced with significantly reduced preforming steps is to be emphasized.

  • Award for near-net-shape 3D meshes for use in fibre-reinforced plastics

As part of the JEC FORUM DACH 2022, the AVK Innovation Awards were presented in Augsburg on November 29th. The innovation price in the category "Research/Science" (first place) was awarded to the team of scientists Dipl.-Ing. Dominik Nuss, Dr.-Ing. Cornelia Sennewald and Prof. Dr.-Ing. habil. Chokri Cherif.

With the development of the pull-off-free Jacquard weaving technology including the technological know-how in the field of highly complex 2D and 3D fabric geometries, which has been established at the ITM of the TU Dresden for many years, Dominik Nuss has succeeded in including different yarn lengths locally into the fabric structure solely through targeted variation of the fabric weave. There-fore, it is now possible to produce completely new types of fabrics without additional draping, especially spherically curved fabrics, but also large-format spiral or even curved fabrics. The fact that the required near-net-shape geometry of the component to be reinforced can be reproduced with significantly reduced preforming steps is to be emphasized.

Continuous simulation aided engineering from CAD design to integrally woven 2D and 3D preforms by means of highly complex weave development for spatial constructions is a unique at the ITM, which was indispensable for the development of these promising woven high-tech structures. This technology is completely new and has never been carried out in this way before. The fabric structures are characterised by a high innovation level due to their geometric diversity and purposes. It can be used in numerous applications and further more contributes to the development of completely new fields of application. The technology can be implemented on all Jacquard weaving machines with only an additional device and the preform geometry is only determined by the control of the Jacquard machine. The preform geometry can be used in the full working width of the weaving machine.

Professor Chokri Cherif, Institute Director of the ITM, and his team are very pleased about these continuous research success in the constantly growing research field of 3D weaving technology, which are achieved at the ITM in close cooperation with industry and users. "This award is a special honour for our institute and confirms that the many years of our excellent research in the field of near-net-shape 3D weaving for the fibre-reinforced plastics sector plays a significant role and that we are making a significant contribution to the sustainable and resource-efficient production of lightweight structures with our development".

Source:

ITM/TU Dresden

Photo: Unsplash
04.10.2022

Karl Lagerfeld at The Metropolitan Museum of Art

Exhibition: Karl Lagerfeld: A Line of Beauty
May 5 – July 16, 2023

The Costume Institute’s spring 2023 exhibition will examine the work of Karl Lagerfeld (1933–2019). Focusing on the designer’s stylistic vocabulary as expressed in aesthetic themes that appear time and again in his fashions from the 1950s to his final collection in 2019, the show will spotlight the German-born designer’s unique working methodology.

Most of the approximately 150 pieces on display will be accompanied by Lagerfeld’s sketches, which underscore his complex creative process and the collaborative relationships with his premières, or head seamstresses. Lagerfeld’s fluid lines united his designs for Balmain, Patou, Chloé, Fendi, Chanel, and his eponymous label, Karl Lagerfeld, creating a diverse and prolific body of work unparalleled in the history of fashion.

Exhibition: Karl Lagerfeld: A Line of Beauty
May 5 – July 16, 2023

The Costume Institute’s spring 2023 exhibition will examine the work of Karl Lagerfeld (1933–2019). Focusing on the designer’s stylistic vocabulary as expressed in aesthetic themes that appear time and again in his fashions from the 1950s to his final collection in 2019, the show will spotlight the German-born designer’s unique working methodology.

Most of the approximately 150 pieces on display will be accompanied by Lagerfeld’s sketches, which underscore his complex creative process and the collaborative relationships with his premières, or head seamstresses. Lagerfeld’s fluid lines united his designs for Balmain, Patou, Chloé, Fendi, Chanel, and his eponymous label, Karl Lagerfeld, creating a diverse and prolific body of work unparalleled in the history of fashion.

Source:

The Metropolitan Museum of Art

Matt O’Sickey Photo: INDA
Matt O’Sickey
12.09.2022

Matt O’Sickey INDA’s New Director of Education & Technical Affairs

  • Experienced nonwovens professional with extensive hygiene, food, medical, and packaging background will strengthen INDA’s key member service areas

INDA, the Association of the Nonwoven Fabrics Industry, announced the appointment of Matt O’Sickey, Ph.D., as its new Director of Education & Technical Affairs. An accomplished market development, technology and product management executive, O’Sickey has more than 20 years of experience with Tredegar Film Products in the absorbent hygiene, food, and medical sectors.

Most recently, he held Director positions at RKW-North America in the areas of research and development, product design, application engineering, site operations, quality, and technology with a focus on breathable, and lamination films for controlled atmosphere packaging.

At INDA, O’Sickey will direct and expand workforce development programs for all industry members, manage the international harmonized standards activities, and play a leadership role in INDA’s product stewardship working groups and conference content development committees.  

  • Experienced nonwovens professional with extensive hygiene, food, medical, and packaging background will strengthen INDA’s key member service areas

INDA, the Association of the Nonwoven Fabrics Industry, announced the appointment of Matt O’Sickey, Ph.D., as its new Director of Education & Technical Affairs. An accomplished market development, technology and product management executive, O’Sickey has more than 20 years of experience with Tredegar Film Products in the absorbent hygiene, food, and medical sectors.

Most recently, he held Director positions at RKW-North America in the areas of research and development, product design, application engineering, site operations, quality, and technology with a focus on breathable, and lamination films for controlled atmosphere packaging.

At INDA, O’Sickey will direct and expand workforce development programs for all industry members, manage the international harmonized standards activities, and play a leadership role in INDA’s product stewardship working groups and conference content development committees.  

O’Sickey has a Ph.D. in Chemical Engineering and a Master’s degree in Engineering Administration, both from Virginia Tech as well as a Bachelor of Science in Chemical Engineering from Purdue University. He holds three U.S. patents. He will operate out of INDA’s offices in Cary, NC.

O’Sickey succeeds Chris Plotz who left INDA to pursue other interests. 

More information:
INDA nonwovens Matt O’Sickey
Source:

INDA

(c) Fraunhofer UMSICHT/Mike Henning
Prof. Christian Doetsch (l.) and Prof. Manfred Renner (r.)
09.08.2022

Fraunhofer UMSICHT: New institute directors

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner holds a doctorate in mechanical engineering, specializing in process engineering and business development. Since 2006, he has held various roles at Fraunhofer UMSICHT, most recently heading up the Products division and overseeing its 126 employees and its budget of 14.8 million euros. He has set international standards through his award-winning research into a free of water tanning leather tanning process that uses compressed carbon dioxide. With the development of innovative aerogel-based insulation materials for building facades, he has made a significant contribution to environmentally friendly, circular applications in the construction industry and initiated a number of industrial projects. One of the notable technological breakthroughs made by his team was the development of a new type of fire-resistant glass, which can withstand even the most extreme heat. This won his development team the Joseph von Fraunhofer Prize in October 2020.

Alongside becoming institute director, Prof. Renner will also take over the leadership of the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE in August 2022. In this role, he will represent the Fraunhofer-Gesellschaft on a national and international level with regard to the transformation of industry and society to a circular economy. In addition, he will start his professorship in Responsible Process Engineering at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. Over the course of his professorship, he will shape the systemic development of the circular economy at a corporate, regional and European level.

Prof. Christian Doetsch has worked in energy research for more than 25 years, spending most of this time at Fraunhofer UMSICHT. As head of the Energy division, he managed a team of around 145 employees and was responsible for a budget of approximately 10.4 million euros. His technological focal points are energy storage, Power-to-X technologies including hydrogen electrolysis and chemical conversion, catalysts, and energy system modeling and optimization. His overarching aim is the integration of renewable energies into a cross-sectoral, resilient energy system.

In 2015, Doetsch co-founded the award-winning start-up Volterion GmbH & Co. KG, which develops redox flow batteries. He attained high visibility on a global scale by redesigning stacks, one of the main components of redox flow batteries, an achievement for which he, his team and Volterion representatives were awarded the Joseph von Fraunhofer Prize in May 2021. The energy expert also acts as deputy spokesperson for the Fraunhofer Energy Alliance and task manager for the energy storage group at the International Energy Agency (IEA). He also co-founded the “Open District Hub e. V.,” an association that promotes the energy transition in the sector by means of energy systems integration.

Since January 2020, he has been Professor of Cross Energy Systems at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. In this role, he conducts research into ecological evaluation and resilience of cross-sectoral energy systems.

Source:

Fraunhofer UMSICHT

IVL
03.08.2022

Winners of the RECO Sustainable Young Designer Competition

Indorama Ventures Public Company Limited (IVL) named the winners of ‘RECO Young Designer Competition’, Thailand's largest upcycling fashion design event, parading haute couture garments containing at least 60% recycled materials.

Eleven finalists showcased 33 handmade sustainable outfits at the 9th edition of the fashion show at IVL’s headquarters in Bangkok, using recycled PET and polyester items to craft creative fashions. Under the concept of ‘REVIVE: Start from the Street,’ RECO supports young Thai designers while raising awareness of recycling. The designs use a range of recycled materials including recycled PET yarns, discarded fabric from factories, and even repurposed safety belts.

Indorama Ventures Public Company Limited (IVL) named the winners of ‘RECO Young Designer Competition’, Thailand's largest upcycling fashion design event, parading haute couture garments containing at least 60% recycled materials.

Eleven finalists showcased 33 handmade sustainable outfits at the 9th edition of the fashion show at IVL’s headquarters in Bangkok, using recycled PET and polyester items to craft creative fashions. Under the concept of ‘REVIVE: Start from the Street,’ RECO supports young Thai designers while raising awareness of recycling. The designs use a range of recycled materials including recycled PET yarns, discarded fabric from factories, and even repurposed safety belts.

RECO awarded finalists and winners with 500,000 baht in prizes to support their careers. First prize of 125,000 baht was awarded to 23-year-old emerging furniture designer Prem Buachum for his ‘The Origin of Rebirth’ collection, using fabric recycled from post-consumer PET bottles. The first runner-up, Sathitkhun Boonmee, was awarded 75,000 baht for his ‘Remembering Your Favorite Teddy Bear’ collection, using old dolls made of polyester fibers. Second runners-up, Worameth Monthanom and Tanakorn Sritong, received 50,000 baht for their ‘Regeneration of Nature (into Spring)’ collection, using unused fabrics and discarded PET film. Napat Tansuwan, a finalist with his’ Don’t Judge’ collection, will go on to create designer merchandise for sponsor Buriram United Football Club using local weaving techniques from communities in Buriram province.

Mrs. Aradhana Lohia Sharma, Vice President at Indorama Ventures and RECO Young Designer Competition Chairperson, said, “Since 2011, RECO's ambition has been to uplift recycling and inspire people to realize the value of recyclable materials to produce great new products for daily life. We have witnessed many thoughtful initiatives on upcycling through the collections created by our talented young Thai designers. The designs this year showcase stunning wearability and innovation while using a large percentage of recycle materials. Public interest in recycling has been growing immensely, and we are grateful to strengthen the relationship with partners like Buriram United Football Club.”

“Indorama Ventures hopes this competition will be a driving force in nurturing sustainable fashion concepts and increasing the acceptance of recycled materials, especially post-consumer PET. We are proud to be a stepping-stone for our youth's design journey and our community’s sustainable future.”

Source:

IVL

3 D Muster im Textil (Design und Foto: Gesa Balbig)
21.07.2022

„Design Goals“ in Augsburg – Alumni setzen Zeichen für nachhaltige Textilien

Noch bis zum 14. September 2022 zeigt das Staatliche Textil- und Industriemuseum Augsburg (tim) die Sonderausstellung „Design Goals“ zu nachhaltigen Textilien. Die Exponate stammen von Designerinnen, die am Fachbereich Textil- und Bekleidungstechnik an der Hochschule Niederrhein ihre Master-Ausbildung absolvierten und nun im Rahmen eines Europäischen Mentoring-Programms zusammen mit Professorin Dr. Marina-Elena Wachs ausstellen.

Zu sehen sind Modeentwürfe und andere Designobjekte aus Airbag-Stoffen, aus Textil-Ausschussware, aus Flusen, aus Herbstlaub, Papiergarnen und vieles mehr. Vor dem Hintergrund endlicher Ressourcen liegt der Fokus der zukunftsweisenden Arbeiten auf einem nachhaltigen Umgang mit dem Material Textil.

Die Ausstellung thematisiert den kreativen Prozess hinter vielversprechenden Innovationen im Mode-, Textil-, Interior- und Automotive Design und in der Architektur. Die Ausstellung gibt Einblicke in analoge und digitale Prozesse heutigen Gestaltens in einer nachhaltigen Welt von morgen.

Noch bis zum 14. September 2022 zeigt das Staatliche Textil- und Industriemuseum Augsburg (tim) die Sonderausstellung „Design Goals“ zu nachhaltigen Textilien. Die Exponate stammen von Designerinnen, die am Fachbereich Textil- und Bekleidungstechnik an der Hochschule Niederrhein ihre Master-Ausbildung absolvierten und nun im Rahmen eines Europäischen Mentoring-Programms zusammen mit Professorin Dr. Marina-Elena Wachs ausstellen.

Zu sehen sind Modeentwürfe und andere Designobjekte aus Airbag-Stoffen, aus Textil-Ausschussware, aus Flusen, aus Herbstlaub, Papiergarnen und vieles mehr. Vor dem Hintergrund endlicher Ressourcen liegt der Fokus der zukunftsweisenden Arbeiten auf einem nachhaltigen Umgang mit dem Material Textil.

Die Ausstellung thematisiert den kreativen Prozess hinter vielversprechenden Innovationen im Mode-, Textil-, Interior- und Automotive Design und in der Architektur. Die Ausstellung gibt Einblicke in analoge und digitale Prozesse heutigen Gestaltens in einer nachhaltigen Welt von morgen.

Der Titel „Design Goals“ bezieht sich auf die Ziele für nachhaltige Entwicklung (Sustainable Development Goals SDGs) der Vereinten Nationen. Die Ausstellung zeigt Design-Lösungen und Strategien in Form von Produkten, Materialien und Konzepten für die Zukunft: Kreative und textiltechnische Lösungen aus bisher ungenutzten Ressourcen.

 

01.07.2022

Award for best master's thesis of the German Textile Mechanical Engineering 2022 goes to young engineer of ITA Aachen

The 2002 prize of the Walter Reiners Foundation of the VDMA Textile Machinery Association for the best Master's thesis in German textile mechanical engineering was awarded to a young engineer from the ITA Institut für Textiltechnik of RWTH Aachen University. The prize ceremony took place at Techtextil 2022 in Frankfurt am Main, Germany. Peter D. Dornier, Chairman of the Board of the Walter Reiners Foundation, presented the award at the VDMA Textile Machinery Association’s booth.

Felix Xaver Zerbes, M.Sc., was awarded the "Promotional Prize for the Best Master's Thesis of the German Textile Machinery Industry 2022", endowed with 3,500 EUR, for his master's thesis "Development and Construction of a Separation Unit for Weft Yarns in Air Jet Weaving".

The 2002 prize of the Walter Reiners Foundation of the VDMA Textile Machinery Association for the best Master's thesis in German textile mechanical engineering was awarded to a young engineer from the ITA Institut für Textiltechnik of RWTH Aachen University. The prize ceremony took place at Techtextil 2022 in Frankfurt am Main, Germany. Peter D. Dornier, Chairman of the Board of the Walter Reiners Foundation, presented the award at the VDMA Textile Machinery Association’s booth.

Felix Xaver Zerbes, M.Sc., was awarded the "Promotional Prize for the Best Master's Thesis of the German Textile Machinery Industry 2022", endowed with 3,500 EUR, for his master's thesis "Development and Construction of a Separation Unit for Weft Yarns in Air Jet Weaving".

The subject of the master's thesis was the development of a mechanism with which faulty sections in the weft yarn can be sorted out before they are woven into the textile. This way, both yarn-related weft defects and material defects can be drastically reduced. The prototype developed by Mr Zerbes shows how this can be done even during the ongoing weaving process without having to stop production. Due to its modular design, the yarn rejection unit can be retrofitted to many different types of air-jet weaving machines, which represents an enormous savings potential not only in Germany but in weaving mills all over the world.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

Bettina Müller ist neue Head of Corporate Communications bei Design Offices (c) Design Offices
Bettina Müller, Head of Corporate Communications bei Design Offices
01.06.2022

Bettina Müller ist neue Head of Corporate Communications bei Design Offices

Design Offices, ein führender Anbieter von Raumlösungen für agiles Arbeiten und Innovation in Deutschland, ernennt Bettina Müller mit Wirkung zum 1. Juni zur Head of Corporate Communications. Sie wird die gesamte Unternehmenskommunikation & Öffentlichkeitsarbeit des Unternehmens verantworten.

Bettina Müller wird die Positionierung des Unternehmens in der Außenwahrnehmung weiter schärfen und eine prägende Rolle im Diskurs über die Zukunft der Arbeit einnehmen. Die Kommunikationsexpertin freut sich auf ihre neuen Aufgaben: „Als Marktführer für flexible Arbeitsumgebungen möchten wir unsere Learnings, Insights und Trends der neuen Arbeitswelt sichtbar machen. Dazu gehören in erster Linie eine aktive Medienarbeit sowie eine aufmerksamkeitsstarke Präsenz bei den relevanten Gesprächs- und Gremienformaten.“ Bettina Müller hatte bei Design Offices in den letzten acht Jahren verschiedenste Management Positionen inne und war zuletzt für den Aufbau des Betreiberangebotes verantwortlich.

Design Offices, ein führender Anbieter von Raumlösungen für agiles Arbeiten und Innovation in Deutschland, ernennt Bettina Müller mit Wirkung zum 1. Juni zur Head of Corporate Communications. Sie wird die gesamte Unternehmenskommunikation & Öffentlichkeitsarbeit des Unternehmens verantworten.

Bettina Müller wird die Positionierung des Unternehmens in der Außenwahrnehmung weiter schärfen und eine prägende Rolle im Diskurs über die Zukunft der Arbeit einnehmen. Die Kommunikationsexpertin freut sich auf ihre neuen Aufgaben: „Als Marktführer für flexible Arbeitsumgebungen möchten wir unsere Learnings, Insights und Trends der neuen Arbeitswelt sichtbar machen. Dazu gehören in erster Linie eine aktive Medienarbeit sowie eine aufmerksamkeitsstarke Präsenz bei den relevanten Gesprächs- und Gremienformaten.“ Bettina Müller hatte bei Design Offices in den letzten acht Jahren verschiedenste Management Positionen inne und war zuletzt für den Aufbau des Betreiberangebotes verantwortlich.

Auf der Grundlage ihrer langjährigen Erfahrungen in unterschiedlichen Führungs- und Fachfunktionen, unter anderem im internationalen Konzernumfeld, bringt Bettina Müller umfangreiches Knowhow bei der Gestaltung und Umsetzung von Transformations- und Innovationsprozessen mit. Vor ihrem Wechsel war die erfahrene Business Managerin für Unternehmen wie Autodesk (internationaler CAD Software Hersteller), Quadient (französischer Konzern für Postbearbeitungssysteme) sowie Informatica (globaler Enterprise Cloud Management Anbieter) tätig.

Source:

Design Offices

Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term. (c) Lectra
Hélène Viot Poirier
04.05.2022

Ross McInnes and Hélène Viot Poirier join Lectra’s Board of Directors

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 
Daniel Harari, Chairman and Chief Executive Officer of Lectra, says: “We are delighted to welcome Ross McInnes and Hélène Viot Poirier to Lectra’s Board of Directors. Through Ross McInnes’ appointment, we will benefit from his extensive experience as a director of listed companies and his knowledge of Lectra’s challenges, as well as his expertise in strategy, management, finance, and governance. Hélène Viot Poirier has extensive knowledge of the digital world and the fashion market. Her appointment will enable the Board of Directors to benefit from her expertise in acquisition strategy, management and the development of environmentally responsible products”.
 
In the last five years, Ross McInnes has been a member of Lectra’s Board of Directors, and a member of the Audit Committee, the Compensation Committee and the Strategic Committee. This first mandate came to an end in April 2020. Ross McInnes is a graduate of the University of Oxford.
 
Since 2020, as an Independent Senior Advisor, she has supported strategic internal and external growth projects in the fashion, digital and consumer goods sectors. Hélène Viot Poirier is a graduate of HEC Paris.

adidas announces the appointment of Alasdhair Willis to Chief Creative Officer. (a) adidas
Alasdhair Willis
23.03.2022

Alasdhair Willis to Shape Future of adidas as Chief Creative Officer

The Chief Creative Officer is the lead within the adidas design community and is responsible for shaping, defining, and shepherding the creative direction for the global brand and its three major labels – Performance , Originals, and Sportswear – to deliver a unified adidas brand experience. Willis will begin his contract beginning of April, reporting to Executive Board Member of Global Brands, Brian Grevy.

Willis is a creative visionary with a long-standing connection to adidas that dates back to 2005, most notably through his role in the concept and development of adidas by Stella McCartney in partnership with Stella McCartney He has remained integral to the growth and development of the partnership since its launch.

Beyond adidas by Stella McCartney, Willis has built a strong understanding of the company’s consumers, brand, labels, and categories through his work on a number of breakthrough projects, including a lead role in developing some of adidas’ most iconic material innovations.

The Chief Creative Officer is the lead within the adidas design community and is responsible for shaping, defining, and shepherding the creative direction for the global brand and its three major labels – Performance , Originals, and Sportswear – to deliver a unified adidas brand experience. Willis will begin his contract beginning of April, reporting to Executive Board Member of Global Brands, Brian Grevy.

Willis is a creative visionary with a long-standing connection to adidas that dates back to 2005, most notably through his role in the concept and development of adidas by Stella McCartney in partnership with Stella McCartney He has remained integral to the growth and development of the partnership since its launch.

Beyond adidas by Stella McCartney, Willis has built a strong understanding of the company’s consumers, brand, labels, and categories through his work on a number of breakthrough projects, including a lead role in developing some of adidas’ most iconic material innovations.

Outside of his work with adidas he is revered for his tenure as Creative Director of British fashion heritage brand, Hunter, transforming what was a small single product business into a multi-category global fashion brand, and as co-founder of the trailblazing Wallpaper* Magazine. It is through this diverse experience that Willis brings not just creative expertise, but the ability to deliver across commercial, strategic, and leadership functions.

As Chief Creative Officer at adidas, Willis will provide global creative leadership, develop and nurture the brand’s creative culture, and empower teams across all design functions.

“Stepping into a permanent role at adidas and evolving our partnership is a great privilege and feels like an incredibly exciting and natural next step,” said Willis. “The power and influence of the brand on sport , sports culture, and beyond is immeasurable. I welcome the opportunity to help establish a new era of design and brand leadership at adidas and, together with the team, take adidas to even higher levels.”

“Alasdhair is a true icon of the industry and together we have produced some of adidas’ most innovative work, so to now have him lead our design community and set the future of our brand expression is a wonderful thing,” said Executive Board Member of Global Brands, Brian Grevy. “We are looking forward to seeing the influence of his unique creative vision, experience and expertise from developing and establishing some of the world’s most recognised brands.”

 

More information:
adidas Alasdhair Willis
Source:

adidas