From the Sector

Reset
494 results
12.03.2024

Polartec: New Initiative “Beyond Begins Today”

Since inventing the first fleece crafted from recycled plastic water bottles more than three decades ago, Polartec®, a Milliken & Company brand, and the creator of innovative and more sustainable textile solutions, has upheld its pledge to protect the environment.

With its new Beyond Begins Today initiative, Polartec aims to raise awareness around the important global themes of sustainability, diversity and positive change.

Polartec is engaged to make the goal of zero waste a reality – from using 100% recycled and plant-based materials, to delivering certified waste reductions and innovative technologies that reduce the impact of its activities.

Since inventing the first fleece crafted from recycled plastic water bottles more than three decades ago, Polartec®, a Milliken & Company brand, and the creator of innovative and more sustainable textile solutions, has upheld its pledge to protect the environment.

With its new Beyond Begins Today initiative, Polartec aims to raise awareness around the important global themes of sustainability, diversity and positive change.

Polartec is engaged to make the goal of zero waste a reality – from using 100% recycled and plant-based materials, to delivering certified waste reductions and innovative technologies that reduce the impact of its activities.

Beyond Begins Today is a multifaceted campaign featuring static and multimedia content, including short films released throughout the year via multiple touchpoints and channels – the first of which will be released on Earth Day 2024 to underscore the underlying premise that the future is what we make it. Polartec’s commitment to sustainable solutions go beyond the integration of increasingly advanced manufacturing methods or the ongoing exploration of novel fibers, and continued investments in sustainable materials development.

Polartec’s promises that every product launches in 2024 will either reduce the impact on the planet, endure the test of time, or contribute to circularity processes. Beyond Begins Today looks at how Polartec fabrics are made to last, and made to be used and enjoyed from one generation to the next and beyond. It explores the innovative monomaterials, repurposed plastic and plant-based nylon membranes and fabrics that Polartec uses to set new standards for high performance materials and the ambitious climate-related objectives across the entire value chain that exceed existing mandates. This holistic strategy shall allow Polartec to stay at the forefront of its industry by producing top-notch textiles that champion environmental stewardship and pave the way for a more sustainable tomorrow.

Source:

Akimbo Communications for Polartec

Mayer & Cie. CN: New headquarters in Jiangsu (c) Mayer & Cie. GmbH & Co. KG
08.03.2024

Mayer & Cie. CN: New headquarters in Jiangsu

Mayer & Cie. CN Changzhou LLC, the Chinese subsidiary of the German circular knitting and braiding machine manufacturer Mayer & Cie., settled in Jiangsu Province at the beginning of the year. Until now, the Sales & Service subsidiary Mayer & Cie. China, founded in 2003 and later to become Mayer & Cie. China, had been based in Shanghai.

The new location within a Sino-German Innovation Park comprises a production hall of around 5,000 square meters. In the future, the circular knitting machines assembled for the domestic market will increasingly consist of locally sourced parts and components from various suppliers.

Since 2011, Mayer & Cie. has been assembling selected machine types for the domestic market at its Chinese plant in Shanghai. It started with a single jersey machine for the most common requirements. Today, China's domestic portfolio includes four types of machines. Until now, the knitting heads for these circular knitting machines had been pre-produced at the Mayer & Cie. plant in the Czech Republic and then transported to China.

Mayer & Cie. CN Changzhou LLC, the Chinese subsidiary of the German circular knitting and braiding machine manufacturer Mayer & Cie., settled in Jiangsu Province at the beginning of the year. Until now, the Sales & Service subsidiary Mayer & Cie. China, founded in 2003 and later to become Mayer & Cie. China, had been based in Shanghai.

The new location within a Sino-German Innovation Park comprises a production hall of around 5,000 square meters. In the future, the circular knitting machines assembled for the domestic market will increasingly consist of locally sourced parts and components from various suppliers.

Since 2011, Mayer & Cie. has been assembling selected machine types for the domestic market at its Chinese plant in Shanghai. It started with a single jersey machine for the most common requirements. Today, China's domestic portfolio includes four types of machines. Until now, the knitting heads for these circular knitting machines had been pre-produced at the Mayer & Cie. plant in the Czech Republic and then transported to China.

The manufacturer is now saying goodbye to this "knitting head principle". It made perfect sense for the start of the assembly line, says Benjamin Mayer, managing partner of Mayer & Cie. However, it leaves little room for flexibility. He explains: "In the future, we will source all parts and components of the machines assembled in China from various local suppliers. This allows us to offer our local customers more attractive prices and faster delivery times with the same quality standards. We expect this change to improve the positioning of our products in the domestic market." In addition, the new plant will be connected to the parent company in Albstadt via an SAP connection. This was imperative to increase efficiency, transparency and quality.

The new headquarters of Mayer & Cie. CN is the German Chinese Innovation Park in Jintan in Jiangsu Province. The companies based there enjoy various advantages, including attractive location costs as well as proximity and exchange with other German companies on site. In addition, the administration of the SGIP supports companies in their search for employees, suppliers and service providers.

Source:

Mayer & Cie. GmbH & Co. KG

01.03.2024

Re:NewCell’s bankruptcy application approved

Re:NewCell AB announced that the Stockholm District Court has decided to approve the previously communicated bankruptcy application and has declared the company bankrupt.

The appointed bankruptcy trustee is lawyer Lars-Henrik Andersson at Cirio Advokatbyrå.

February,25 the Board of Directors had decided to file for bankruptcy of Re:NewCell AB at the Stockholm District Court. The reason for the decision to file for bankruptcy was that Re:NewCell has not been able to secure sufficient financing to complete the strategic review, announced on 20 November 2023, with satisfactory result.

As part of the strategic review, Re:NewCell has had well advanced negotiations with its two largest shareholders, H&M and Girindus, its existing lenders BNP Paribas, European Investment Bank, Finnvera (as partial guarantor), Nordea, AB Svensk Exportkredit and potential new investors as well as other stakeholders regarding long-term financing solutions. These discussions have not resulted in a solution which would provide Re:NewCell with the necessary liquidity and capital to ensure its operations going forward.

Re:NewCell AB announced that the Stockholm District Court has decided to approve the previously communicated bankruptcy application and has declared the company bankrupt.

The appointed bankruptcy trustee is lawyer Lars-Henrik Andersson at Cirio Advokatbyrå.

February,25 the Board of Directors had decided to file for bankruptcy of Re:NewCell AB at the Stockholm District Court. The reason for the decision to file for bankruptcy was that Re:NewCell has not been able to secure sufficient financing to complete the strategic review, announced on 20 November 2023, with satisfactory result.

As part of the strategic review, Re:NewCell has had well advanced negotiations with its two largest shareholders, H&M and Girindus, its existing lenders BNP Paribas, European Investment Bank, Finnvera (as partial guarantor), Nordea, AB Svensk Exportkredit and potential new investors as well as other stakeholders regarding long-term financing solutions. These discussions have not resulted in a solution which would provide Re:NewCell with the necessary liquidity and capital to ensure its operations going forward.

"I regret to inform that we have been forced to take this decision to file for bankruptcy. As we have a strong belief in the company’s long-term potential, we have together with our advisors spent very substantial time and efforts into trying to secure the necessary liquidity, capital and ownership structure for the company to secure its future. As part of the negotiations, we have had intense dialogues with both current main owners, new investors and our banks, as well as other stakeholders. However, these discussions have not been successful. This is a sad day for the environment, our employees, our shareholders, and our other stakeholders, and it is a testament to the lack of leadership and necessary pace of change in the fashion industry” says Chairman of the Board of Directors, Michael Berg.

More information:
Renewcell bankruptcy
Source:

Renewcell

01.03.2024

Autoneum: New Business Unit for Commercial Vehicles

Autoneum has established a new Business Unit Commercial Vehicles to expand its existing truck business and to increase revenue and profitability in this vehicle segment as part of the Group’s strategic focus on profitable growth. To begin with, the Business Unit will focus on the commercial vehicles business in Europe and South America, as these two regions have a comparable customer base. The Business Unit is responsible for the global commercial vehicles business development, while its financial results will be consolidated within the Business Groups.

Autoneum has established a new Business Unit Commercial Vehicles to expand its existing truck business and to increase revenue and profitability in this vehicle segment as part of the Group’s strategic focus on profitable growth. To begin with, the Business Unit will focus on the commercial vehicles business in Europe and South America, as these two regions have a comparable customer base. The Business Unit is responsible for the global commercial vehicles business development, while its financial results will be consolidated within the Business Groups.

The new Business Unit focuses primarily on the business with components for medium and heavy trucks as well as agricultural commercial vehicles. Following the acquisition of Borgers Automotive in April last year, Autoneum has significantly expanded its product and technology portfolio for these vehicle segments. In combination with the Company’s global presence and diversified customer structure, this provides an ideal basis for future profitable growth. Autoneum already operates plants which manufacture products for the exterior and interior of commercial vehicles in Belgium, Czech Republic, France, Germany and Poland, as well as in Brazil. With the creation of a dedicated Business Unit Commercial Vehicles, Autoneum aims to leverage its existing production footprint in order to further grow the business worldwide.

As with the product portfolio for light vehicles, Autoneum’s multifunctional, lightweight and sustainable systems and components are suitable for commercial vehicles of all drive types. Autoneum is therefore well positioned for the expected increase in electric models due to more stringent environmental regulations.

More information:
Autoneum Automotive acoustic
Source:

Autoneum

CARBIOS and Landbell Group: Collaboration for biorecycling plant (c) Landbell Group / CARBIOS
01.03.2024

CARBIOS and Landbell Group: Collaboration for biorecycling plant

CARBIOS and Landbell Group, a global operator of more than 40 producer responsibility organizations (PROs) and a provider of closed-loop recycling solutions, announce the signing of a non-binding Memorandum of Understanding for the sourcing, preparation and recycling of post-consumer PET waste using CARBIOS’ biorecycling technology at its first commercial plant in Longlaville from 2026.  

The partnership will leverage Landbell Group’s expertise and network in the sourcing of PET packaging and textile waste which will be prepared for biorecycling. Thanks to CARBIOS’ highly selective enzyme, less sorting and washing is required compared to current recycling technologies, offering future savings in energy and water use. From 2026, Landbell Group will supply CARBIOS with 15 kt/year of PET flakes, ensuring a steady supply chain for sustainable PET production. These flakes will serve as essential feedstock for CARBIOS’ production of food-grade PTA and MEG, further re-polymerized into PET.

CARBIOS and Landbell Group, a global operator of more than 40 producer responsibility organizations (PROs) and a provider of closed-loop recycling solutions, announce the signing of a non-binding Memorandum of Understanding for the sourcing, preparation and recycling of post-consumer PET waste using CARBIOS’ biorecycling technology at its first commercial plant in Longlaville from 2026.  

The partnership will leverage Landbell Group’s expertise and network in the sourcing of PET packaging and textile waste which will be prepared for biorecycling. Thanks to CARBIOS’ highly selective enzyme, less sorting and washing is required compared to current recycling technologies, offering future savings in energy and water use. From 2026, Landbell Group will supply CARBIOS with 15 kt/year of PET flakes, ensuring a steady supply chain for sustainable PET production. These flakes will serve as essential feedstock for CARBIOS’ production of food-grade PTA and MEG, further re-polymerized into PET.

Through the partnership with Landbell Group in Germany, the supply of multilayer trays through the CITEO tender in France  and the MoU with Indorama Ventures, CARBIOS will have sourced over 70% of its feedstock required for the 50kt/year capacity when its first commercial plant in Longlaville, France, will operate at full capacity. Close to the borders with Belgium, Germany and Luxembourg, the plant’s location is strategic for nearby waste supplies.

Through this partnership with CARBIOS, Landbell Group will ensure that the problematic PET fractions such as multilayered, colored and opaque trays from packaging waste and polyester textile waste are redirected towards recycling. In this way, Landbell Group strengthens its commitment to the development of recycling solutions to enable a circular economy.

FET: New Senior Materials and Process Scientist (c) FET
R&D Manager Dr Jonny Hunter (left) welcomes Dr Kristoffer Kortsen, Senior Materials and Process Scientist
28.02.2024

FET: New Senior Materials and Process Scientist

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has appointed Dr Kristoffer Kortsen as Senior Materials and Process Scientist. He will report directly to R&D Manager, Dr Jonny Hunter, who joined FET in early 2023 in a growing Research and Development team.

Kortsen’s main area of work is in Gel Spinning of UHMWPE (Ultra-High Molecular Weight Polyethylene). His contribution will help provide gel spinning expertise and equipment in the near future to a range of industries including medical, aerospace, defence aerospace and marine.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has appointed Dr Kristoffer Kortsen as Senior Materials and Process Scientist. He will report directly to R&D Manager, Dr Jonny Hunter, who joined FET in early 2023 in a growing Research and Development team.

Kortsen’s main area of work is in Gel Spinning of UHMWPE (Ultra-High Molecular Weight Polyethylene). His contribution will help provide gel spinning expertise and equipment in the near future to a range of industries including medical, aerospace, defence aerospace and marine.

He completed a Master’s in chemistry at KU Leuven, graduating magna cum laude in 2018. For his Master’s placement, he worked on the production of impact modifier additives for PVC at Kaneka Belgium. Continuing a partnership with this international chemical manufacturing company, he joined the Howdle group at the University of Nottingham for a PhD project looking into the industrial potential of scCO2 dispersion polymerisations for additive production. After graduating, he worked in the Shaver group at the University of Manchester, developing a holistic approach to plastics recycling and sustainability across the many stakeholders in the field.

Source:

Fibre Extrusion Technology Ltd (FET)

19.02.2024

Lectra: Financial statements for 2023

  • Revenues: 477.6 million euros (-6%)
  • EBITDA before non-recurring items: 79.0 million euros (-15%)
  • Net income: 32.6 million euros (-26%)
  • Free cash flow before non-recurring items: 45.3 million euros
  • Dividend: €0.36 per share

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the fiscal year 2023. Audit procedures have been performed by the Statutory Auditors.

Currency changes between 2022 and 2023 mechanically decreased revenues and EBITDA before non-recurring items by 3.9 million euros (-3%) and 1.7 million euros (-8%) respectively in Q4, and by 11.2 million euros (-2%) and 4.8 million euros (-6%) respectively in the year, at actual exchange rates compared to like-for-like figures.

  • Revenues: 477.6 million euros (-6%)
  • EBITDA before non-recurring items: 79.0 million euros (-15%)
  • Net income: 32.6 million euros (-26%)
  • Free cash flow before non-recurring items: 45.3 million euros
  • Dividend: €0.36 per share

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the fiscal year 2023. Audit procedures have been performed by the Statutory Auditors.

Currency changes between 2022 and 2023 mechanically decreased revenues and EBITDA before non-recurring items by 3.9 million euros (-3%) and 1.7 million euros (-8%) respectively in Q4, and by 11.2 million euros (-2%) and 4.8 million euros (-6%) respectively in the year, at actual exchange rates compared to like-for-like figures.

OUTLOOK
While the 2023 full-year results were affected by the adverse environment, they also attest to the substantial improvement in the fundamentals of the Group's business model, which will have a positive impact on 2024 results. Persistent macroeconomic and geopolitical uncertainties could nevertheless continue to weigh on investment decisions by the Group's customers.

While the most recent indicators seem to suggest that the situation is unlikely to deteriorate further, the timing and magnitude of a rebound in new system orders remain uncertain.

Outlook for 2024
To facilitate analysis, the accounts of Lectra excluding the Launchmetrics acquisition ("Lectra 2023 Scope") will be analysed separately from the Launchmetrics accounts in 2024.

The Group has based its 2024 objectives on the exchange rates in effect on December 29, 2023, in particular $1.10/€1. When converting 2023 results using the exchange rates retained for 2024, 2023 revenues are mechanically reduced by 4.7 million euros (to 472.9 million euros) and 2023 EBITDA before non-recurring items is reduced by 2.2 million euros (to 76.8 million euros). Thus, for the Lectra 2023 Scope, the comparisons between 2024 and 2023 printed below are based on constant exchange rates.

At this early stage of 2024, continuing low visibility regarding orders and revenues from new systems makes it impossible to predict the actual timing and scale of the future rebound in this area. On the other hand, visibility is high for recurring revenues, which accounted for 68% of total revenues in 2023 and will continue to grow in 2024.

In light of the above, Lectra has set as its objective for 2024, for the Lectra 2023 Scope, to achieve revenues in the range of 480 to 530 million euros (+2% to +12%) and EBITDA before non-recurring items in the range of 85 to 107 million euros (+10% to +40%).

The low end of the revenues range is based on the absence of a rebound in new systems orders, which would remain stable in 2024 relative to 2023, with a 6% decline in revenues from perpetual software licenses, equipment and accompanying software and non-recurring services, as the order backlog was lower on December 31, 2023 than a year before.

The high end of the revenues range reflects a gradual rebound in new systems orders, which at year-end 2024 would be back to year-end 2022 level.
 
In addition, Launchmetrics revenues (for the consolidation period from January 23 to December 31) are projected to be in the range of 42 to 46 million euros, with an EBITDA margin before non-recurring items of more than 15% (assuming an exchange rate of $1.10/€1).

07.02.2024

RadiciGroup’s roadmap to a sustainable future

“From Earth to Earth”: The new plan defines goals and concrete actions in Environmental, Social and Governance (ESG) areas to foster value creation for all stakeholders and put new sustainability regulatory requirements at the centre of attention.

A project, designed to enhance RadiciGroup's transparency and commitment to develop a responsible business along its entire value chain from an economic, social and environmental perspective and focus on the ever more widespread and stringent sustainability regulatory requirements. These are the features and goals of the Sustainability Plan presented by the Group and called "From Earth to Earth", precisely to emphasize the intent to focus on the Earth and future generations.

“From Earth to Earth”: The new plan defines goals and concrete actions in Environmental, Social and Governance (ESG) areas to foster value creation for all stakeholders and put new sustainability regulatory requirements at the centre of attention.

A project, designed to enhance RadiciGroup's transparency and commitment to develop a responsible business along its entire value chain from an economic, social and environmental perspective and focus on the ever more widespread and stringent sustainability regulatory requirements. These are the features and goals of the Sustainability Plan presented by the Group and called "From Earth to Earth", precisely to emphasize the intent to focus on the Earth and future generations.

In the context of a complex and constantly changing scenario, the Group has therefore decided to capitalize on the goals achieved and look beyond them with a plan defining the medium-term targets and the actions to be taken to fulfil them and covering all areas considered to be "material”, i.e., relevant from the point of view of ESG and financial risks, opportunities and impacts. Indeed, the ultimate goal of "From Earth to Earth" is to support business continuity and the growth of the company and all its stakeholders.

The project was the result of a multi-year collaboration with Deloitte, which contributed an external and objective viewpoint on the definition of the material targets and themes. However, it was not an armchair exercise, but the result of an extensive listening process involving internal and external stakeholders, all of whom were sustainability experts who helped define a shortlist of strategic themes for both the Group and its main stakeholders. These issues were then analysed in detail using working tables on the different themes to identify the objectives in Environmental, Social and Governance areas and the related concrete actions needed to achieve them, in line with the European decarbonization and energy transition policies and the
United Nations Sustainable Development Goals, a global blueprint for sustainable growth.

In particular, RadiciGroup’s environmental goals include: a 20% increase and differentiation in renewable source electricity consumption, an 80% reduction in total direct greenhouse gas emissions by 2030 compared to 2011, attention to water consumption to limit the impact on local communities and biodiversity, the extension of Life Cycle Assessment (LCA) methodology to measure the environmental impact of 70% of the products (in terms of weight) manufactured by the entire Group, collaboration among the various actors in the supply chain from an ecodesign perspective and the search for increasingly more sustainable and circular packaging solutions.

06.02.2024

Hohenstein future part of the AI hotspot IPAI

The testing service provider and research partner Hohenstein is joining the Innovation Park for Artificial Intelligence (IPAI) in Heilbronn. There are already points of contact with AI applications in some interdisciplinary research projects. In addition, there is the cooperation with the Munich-based start-up Sizekick and its AI-based technology for size recommendations, which aims to reduce size-related returns in online fashion retail.

"We expect the connection to the IPAI AI network to provide us with valuable impulses to remain fit for the future," explains Hohenstein CEO Dr. Timo Hammer, "This unique platform brings together a wide variety of players with their experience and knowledge. New ideas, projects and even products can be generated with great dynamism in the network as an intelligent response to future requirements. Because one thing is clear - artificial intelligence is THE key technology of the future".

The testing service provider and research partner Hohenstein is joining the Innovation Park for Artificial Intelligence (IPAI) in Heilbronn. There are already points of contact with AI applications in some interdisciplinary research projects. In addition, there is the cooperation with the Munich-based start-up Sizekick and its AI-based technology for size recommendations, which aims to reduce size-related returns in online fashion retail.

"We expect the connection to the IPAI AI network to provide us with valuable impulses to remain fit for the future," explains Hohenstein CEO Dr. Timo Hammer, "This unique platform brings together a wide variety of players with their experience and knowledge. New ideas, projects and even products can be generated with great dynamism in the network as an intelligent response to future requirements. Because one thing is clear - artificial intelligence is THE key technology of the future".

The Innovation Park for Artificial Intelligence (IPAI) in Heilbronn (www.ip.ai) sees itself as an innovation platform for applied AI and a German lighthouse project with international appeal. The center is intended to map the entire AI value chain, from the qualification of specialists to the application of ethically responsible AI. The aim is to use the AI ecosystem to bring together companies, start-ups, research institutions, scientists, and public institutions and to secure Germany's digital independence and competitiveness in a key future technology.

Source:

Hohenstein Laboratories GmbH & Co. KG

EMPEL Green Theme Technologies
06.02.2024

PFAS-free and water-free textile finishing enters Japanese market

Green Theme Technologies (GTT), creators of the PFAS-free and water-free EMPEL® textile finishing platform, delivers advanced performance and a long term sustainability solution to the Japanese market. Green Theme Technologies, Inc. (GTT) is a US-based textile innovation company with a global vision to increase performance and eliminate pollution.

EMPEL® is a solution for textile mills looking to provide clean, high-performance finishes, and GTT actively promotes this innovative technology to all relevant Japanese companies, including mills, manufacturers, and brands. YKK, the Japanese global leader in zipper manufacturing, has already adopted the EMPEL® technology into their manufacturing process and promotes the technology globally in their new DynaPel™ collection.

Green Theme Technologies (GTT), creators of the PFAS-free and water-free EMPEL® textile finishing platform, delivers advanced performance and a long term sustainability solution to the Japanese market. Green Theme Technologies, Inc. (GTT) is a US-based textile innovation company with a global vision to increase performance and eliminate pollution.

EMPEL® is a solution for textile mills looking to provide clean, high-performance finishes, and GTT actively promotes this innovative technology to all relevant Japanese companies, including mills, manufacturers, and brands. YKK, the Japanese global leader in zipper manufacturing, has already adopted the EMPEL® technology into their manufacturing process and promotes the technology globally in their new DynaPel™ collection.

GTT’s activities in Japan are supported by the Japan External Trade Organization (JETRO), a government-related organization that works to promote mutual trade and investment between Japan and the rest of the world. GTT has been approved for JETRO’s Invest Japan Support Program, which allows GTT to leverage its resources to set up an office in Japan in the future and for J-Bridge Program to forge relationships with prospective Japanese partners.

Source:

Green Theme Technologies

26.01.2024

Lenzing: Impairment requirements (EBIT) for the financial year 2023

  • EBITDA of around EUR 300 million expected for 2023
  • Non-cash impairment losses of up to EUR 480 million
  • Implementation of the performance program fully on track

The annual valuation of assets in accordance with IFRS for the entire Lenzing Group both nationally in Austria and internationally, has resulted in a projected asset impairment of up to EUR 480 million for the 2023 financial year.1 The reasons for the impairment requirements are, on the one hand, continued uncertainties in the economic environment and, on the other hand, still increased raw material and energy costs as well as a higher interest rate environment.

The impairment losses are non-cash effective and have no impact on the full-year EBITDA for 2023, but do affect EBIT for the 2023 financial year. The Managing Board is specifying the previous earnings forecast for the 2023 financial year (EBITDA: EUR 270 – 330 million) and expects an EBITDA of around EUR 300 million.

  • EBITDA of around EUR 300 million expected for 2023
  • Non-cash impairment losses of up to EUR 480 million
  • Implementation of the performance program fully on track

The annual valuation of assets in accordance with IFRS for the entire Lenzing Group both nationally in Austria and internationally, has resulted in a projected asset impairment of up to EUR 480 million for the 2023 financial year.1 The reasons for the impairment requirements are, on the one hand, continued uncertainties in the economic environment and, on the other hand, still increased raw material and energy costs as well as a higher interest rate environment.

The impairment losses are non-cash effective and have no impact on the full-year EBITDA for 2023, but do affect EBIT for the 2023 financial year. The Managing Board is specifying the previous earnings forecast for the 2023 financial year (EBITDA: EUR 270 – 330 million) and expects an EBITDA of around EUR 300 million.

Stephan Sielaff, Chief Executive Officer of the Lenzing Group: “In the third quarter of 2023, we responded to the persistently difficult market environment and launched a comprehensive performance program, which we have been consistently implementing since then with a focus on positive free cash flow and stronger sales and margin growth. We can therefore confirm our earnings forecast with an EBITDA of around EUR 300 million. The valuation adjustment in accordance with IFRS does not change the strategic orientation of the Lenzing Group.”

Nico Reiner, Chief Financial Officer, adds: “The implementation of the performance program is going according to plan. In the future, cost measures alone are expected to contribute more than EUR 100 million to earnings annually, of which more than EUR 50 million will already be effective for the 2024 financial year. We are on target, particularly in terms of strengthening free cash flow, and we also achieved positive free cash flow in the fourth quarter. The revaluation of assets is now consistent and the right step for the future direction.”

The 2023 annual results will be presented on March 15, 2024.
 

1 Subject to potential changes resulting from the ongoing financial audit

Source:

Lenzing AG

Advance Denim launches collection with Lenzing's matte TENCEL™ Lyocell fibers (c) Advance Denim
24.01.2024

Advance Denim launches collection with Lenzing's matte TENCEL™ Lyocell fibers

Lenzing Group announced the collaboration with China’s internationally recognized denim mill, Advance Denim, to use matte TENCEL™ Lyocell fibers for their latest Denim Collection.

The TENCEL™ brand offers innovative and planet-friendly fiber solutions1 that strive to enhance the adoption of responsible production2 within the textile industry. Leveraging resource-saving, closed-loop production process3, TENCEL™ fibers are naturally soft and smooth to the touch and support a natural dry feeling through moisture control. The rollout of matte TENCEL™ Lyocell fibers in 2021 provided denim manufacturers with a solution that enabled them to enjoy the ample tactile and environmental benefits of TENCEL™ fibers, while also maintaining a matte finish on the end product.

Lenzing Group announced the collaboration with China’s internationally recognized denim mill, Advance Denim, to use matte TENCEL™ Lyocell fibers for their latest Denim Collection.

The TENCEL™ brand offers innovative and planet-friendly fiber solutions1 that strive to enhance the adoption of responsible production2 within the textile industry. Leveraging resource-saving, closed-loop production process3, TENCEL™ fibers are naturally soft and smooth to the touch and support a natural dry feeling through moisture control. The rollout of matte TENCEL™ Lyocell fibers in 2021 provided denim manufacturers with a solution that enabled them to enjoy the ample tactile and environmental benefits of TENCEL™ fibers, while also maintaining a matte finish on the end product.

“Matte TENCEL™ fibers are an extremely important innovation for the denim sector as they address the need for responsible denim made with less shine for a more vintage look. Many brands are currently looking for styles that meet this criterion while also providing softness and drapability for wide-leg jeans. Matte TENCEL™ fibers create the perfect mixture of performance and sustainability without sacrificing that true vintage indigo look,” said Amy Wang, General Manager of Advance Denim. “The matte denim in the ‘Denim Collection’, achieved by using matte TENCEL™ fibers, not only has exceptional softness to the touch, but its fiber properties also make the denim more like traditional cotton jeans after washing. This will enable the final garments to retain the intended retro style of the fabric.”

 

1 TENCEL™ Lyocell and Modal fibers are certified with the EU Ecolabel for textile products (license no. AT/016/001) for environmental excellence.
2 The responsible production of TENCEL™ Lyocell and Modal fibers uses at least 50% less water and emits at least 50% less CO2 compared to generic lyocell and modal fibers, according to Higg MSI, thereby saving precious resources for future generations. Results based on LCA standards (ISO 14040/44) and available via Higg MSI (Version 3.7).
3 Savings consider solvent recovery.

Source:

Lenzing Group

B.I.G. Yarns: Virgin polyester BCF yarns for automotive carpet (c) Beaulieu International Group
17.01.2024

B.I.G. Yarns: Virgin polyester BCF yarns for automotive carpet

To expand its support for high-end and luxurious automotive interiors, B.I.G. Yarns has completed its first industrial production runs of virgin polyester BCF yarns for automotive carpet to complement its line of polyamide PA6 superior yarns.

There is a growing market in PET for automotive interior applications, with polyester allowing automotive OEMs and Tier 1 to develop products that, from the outset, consider eco-design by building MONO-polymer carpets and flooring that are 100% recyclable at End of Life (EOL ). These materials are helping to ensure improved and more sustainable EOL recycling of electric vehicles that are driving the future of the car industry.

To expand its support for high-end and luxurious automotive interiors, B.I.G. Yarns has completed its first industrial production runs of virgin polyester BCF yarns for automotive carpet to complement its line of polyamide PA6 superior yarns.

There is a growing market in PET for automotive interior applications, with polyester allowing automotive OEMs and Tier 1 to develop products that, from the outset, consider eco-design by building MONO-polymer carpets and flooring that are 100% recyclable at End of Life (EOL ). These materials are helping to ensure improved and more sustainable EOL recycling of electric vehicles that are driving the future of the car industry.

The new PET BCF Yarns offer high-performance for automotive carpets, including abrasion and stain resistance, and durability, passing all stringent automotive tests including the Taber test for abrasion performance, compressibility and recovery ability test, light fastness in automotive (DIN EN ISO 105-B06) and VOC (fogging) according the VDA 278 test on VOC and FOG emission. The yarns can be color solution dyed, have a dTex between 1300 – 1500, 81 filaments and are ideally for mats with a composition of 400 to 800 gram per m², while the yarns for molded carpets have a dTex of 1200, 144 filaments for 380 gram per m².

With the addition of PET BCF yarns, B.I.G. Yarns is now a one-stop-shop for 3 types of Solution Dyed BCF carpet yarns for the automotive industry: nylon (PA6), polypropylene (PP) and polyester (PET), and the Eqo-range of PA6 yarns – the sustainability focused EqoBalance, EqoCycle and EqoYarn.

The automotive carpet market is expected to grow strongly in the coming decade with the increased demand for vehicle customization and personalization driven by owners looking to upgrade and enhance interiors, including the flooring area.
A growing awareness around car hygiene is also boosting the market as consumers become more conscious of maintaining cleanliness in their vehicles, including the floors. Automotive carpets provide an effective solution by trapping dirt and preventing it from spreading to other areas.

Source:

Beaulieu International Group

17.01.2024

Everfield acquires Swedish software specialist for commercial laundry industry

Software group Everfield has acquired the Swedish software reseller “SoCom Scandinavia AB” (SoCom Scandinavia). The previously independent reseller is now a subsidiary of German “SoCom Informationssysteme GmbH” (SoCom), which Everfield acquired early 2023. SoCom Scandinavia distributes SoCom’s ERP system for the commercial laundry industry in Scandinavia. SoCom is among Europe’s leading providers in this segment and with this acquisition is further expanding its market position in the Nordic countries.

Software group Everfield has acquired the Swedish software reseller “SoCom Scandinavia AB” (SoCom Scandinavia). The previously independent reseller is now a subsidiary of German “SoCom Informationssysteme GmbH” (SoCom), which Everfield acquired early 2023. SoCom Scandinavia distributes SoCom’s ERP system for the commercial laundry industry in Scandinavia. SoCom is among Europe’s leading providers in this segment and with this acquisition is further expanding its market position in the Nordic countries.

“By acquiring SoCom Scandinavia, we have successfully completed the first so-called bolt-on acquisition for one of our portfolio companies”, says Oscar Koberling, Acquisitions Manager at Everfield. In a bolt-on acquisition, the company being purchased is integrated into an existing portfolio company. “We focus on long-term sustainable growth and work closely with the management of our portfolio companies to identify the right targets”, Koberling highlights. “With the addition of SoCom Scandinavia, SoCom can now further strengthen the sales and support in this region and thereby continue to foster growth in Scandinavia.” With its Enterprise Resource Planning (ERP) software “TIKOS”, the German software developer SoCom from Krumbach enables laundries of any scale to achieve end-to-end process management.

SoCom Scandinavia distributes the “TIKOS” laundry software in Sweden, Finland, Norway, Denmark and Iceland. The company was founded in 2017 by the sole shareholder Anna Johansson, in close cooperation with the German SoCom Informationssysteme GmbH. “I myself come from the commercial laundry industry and was therefore able to convince myself of the performance and flexibility of the TIKOS software in practice”, says Anna Johansson. “Our success in the past years shows that many laundries in Scandinavia share this assessment. In the future, we will work even more closely with our German colleagues to further expand our market share in the region.”

Johansson and her team will continue to be available to customers at the existing location. “Since establishing SoCom Scandinavia, Anna and her team have already won and supported a plethora of well-known clients for our software”, emphasizes SoCom’s CEO Michael Wieser. “By integrating SoCom Scandinavia, we can streamline our processes even further. Our main goal remains to offer the best possible service to our clients.”

With its steadily growing software and service portfolio, SoCom has been operating in the laundry industry for over thirty years and is a market leader in the German-speaking region. In total, SoCom’s products are used in over 350 laundries across 17 countries.

More information:
Everfield SoCom laundry Software
Source:

möller pr GmbH

16.01.2024

Hohenstein releases 2023 sustainability report

The report details sustainability efforts at its Boennigheim headquarters and targets for 2024. Hohenstein has replaced previous environmental guidelines with strategic development in accordance with Environmental, Social and Corporate Governance (ESG) and adopted a sustainability roadmap for the future.

Hohenstein has been implementing environmental and social measures for decades. As the first neutral assessment of these measures in 2019, Hohenstein participated in the ECOfit programme in Baden-Württemberg, Germany. A regular external assessment is to be introduced in 2024.

The report details sustainability efforts at its Boennigheim headquarters and targets for 2024. Hohenstein has replaced previous environmental guidelines with strategic development in accordance with Environmental, Social and Corporate Governance (ESG) and adopted a sustainability roadmap for the future.

Hohenstein has been implementing environmental and social measures for decades. As the first neutral assessment of these measures in 2019, Hohenstein participated in the ECOfit programme in Baden-Württemberg, Germany. A regular external assessment is to be introduced in 2024.

  • Environmental: Overall, energy consumption was actively reduced, and renewable energy use promoted. Hohenstein also collected rail and air travel data to be used in CO2 accounting in 2024.
  • Social: Hohenstein actively involved its employees in sustainability activities based on a survey and internal education. In future, Hohenstein will improve the ratio of female managers and implement a training campaign on the company values for employees.
  • Governance: Hohenstein management has prioritized good communication through regular colloquia for employees and access to human resources consultation. They intend to intensify the dialogue with employees through further events.
Source:

Hohenstein

Vesta Corporation presented first Sustainability Report (c) Vesta Corporation
05.01.2024

Vesta Corporation: First Sustainability Report

The Tuscan tannery Vesta Corporation has presented to its stakeholders a report outlining its current commitment and future objectives, with a view to innovating, safeguarding and fostering high-end leather material processing.

Ever since it was founded in 1966 in Ponte a Egola, the Tuscan hub for the production of leather for vegetable tanned soles, Vesta has been a supplier and partner of haute couture and sportswear brands, from lightweight calf and half-calf leather, to heavy leathers made with hind and rump hide, for leatherware and shoes.

The Tuscan tannery Vesta Corporation has presented to its stakeholders a report outlining its current commitment and future objectives, with a view to innovating, safeguarding and fostering high-end leather material processing.

Ever since it was founded in 1966 in Ponte a Egola, the Tuscan hub for the production of leather for vegetable tanned soles, Vesta has been a supplier and partner of haute couture and sportswear brands, from lightweight calf and half-calf leather, to heavy leathers made with hind and rump hide, for leatherware and shoes.

To draft this Report, reference was made to the “Global Reporting Initiative Sustainability Reporting Standards” established by the Global Reporting Initiative (GRI). The information in the balance sheet refers to the year 2022 (from 1 January to 31December 2022). Wherever possible, data for the previous year are included, to allow for a comparison of data over time and to assess the trend of Vesta activities. Sustainability is an objective-driven process. This means that comparing data allows for concretely measuring the company’s progress, as it pursues this accounting process year after year.

The improvement actions already implemented by Vesta involve corporate responsibility from an environmental, social and governance perspective. An example are the improved heating and processing plants (which entails the construction of a new tumbling department based on 4.0 technology). This guarantees significant energy, water and economic savings. Along with numerous corporate certifications, the company has passed the Raw Material Traceability test with a score of EXCELLENT, as well as the Carbon and Water footprint analysis.

As confirmation of its commitment to improving corporate performance levels, Vesta has been upgraded from BRONZE (2020) to GOLD in 2023, as assessed by the Leather Working Group (which measures leather manufacturers’ environmental performance for ecological production and for a systemic management of quality, environmental, safety and ethical factors).

Becoming energy-independent is a major step in the pipeline, involving the installation of a photovoltaic plant. This is complemented by the implementation of a project aimed at totally compensating its CO2 emissions for the year subject to accounting and certification. This neutrality will be achieved through the acquisition of credits deriving from projects certified by the United Nations. For example, with the construction of an important hydro-electric plant to which Vesta is contributing. With regard to production, corporate research is currently focused on developing solutions to reduce water and energy use. It is also implementing circular trends by adopting an increasing number of bio-based products, to guarantee the most sustainable end-of-life and waste management for its products.

Source:

Vesta Corporation

Photo: akiragiulia, Pixabay
05.01.2024

Research to reduce shed of microplastics during laundering

A collaboration between Deakin University researchers and Australia’s largest commercial linen supplier Simba Global is tackling a critical global issue, the spread of harmful microplastics through our laundry.

Clothing and textiles are estimated to generate up to 35 per cent of the microplastics found in the world’s oceans, making them one of the biggest contributors. But there is still a lot to be learnt about the characteristics of these microplastics and exactly how and why they are generated.

Researchers at the ARC Research Hub for Future Fibres in Deakin’s Institute for Frontier Materials (IFM) have teamed up with Simba Global, a global textile manufacturing and supply company, to better understand the extent and type of microplastics shed when their products are laundered. Simba Global wants to lead the charge to reduce the environmental impact of textiles.

Lead scientist IFM Associate Professor Maryam Naebe said working with an industry partner on the scale of Simba Global meant the research could have a huge real-world impact.

A collaboration between Deakin University researchers and Australia’s largest commercial linen supplier Simba Global is tackling a critical global issue, the spread of harmful microplastics through our laundry.

Clothing and textiles are estimated to generate up to 35 per cent of the microplastics found in the world’s oceans, making them one of the biggest contributors. But there is still a lot to be learnt about the characteristics of these microplastics and exactly how and why they are generated.

Researchers at the ARC Research Hub for Future Fibres in Deakin’s Institute for Frontier Materials (IFM) have teamed up with Simba Global, a global textile manufacturing and supply company, to better understand the extent and type of microplastics shed when their products are laundered. Simba Global wants to lead the charge to reduce the environmental impact of textiles.

Lead scientist IFM Associate Professor Maryam Naebe said working with an industry partner on the scale of Simba Global meant the research could have a huge real-world impact.

Simba Global is the major linen supplier to Australia’s hospitals, hotels and mining camps, resulting in 950,000 tonnes of textile products – including bedsheets, bath towels, scrubs and much more – going through the commercial laundering process each year. It also supplies international markets in New Zealand, Singapore and the US.

“As part of our research, we will investigate potential solutions including the pre-treatment of textiles to reduce the shedding of microplastics, or even increasing the size of the plastics that break down so they can be better captured and removed by filtration during the laundering process,” Associate Professor Naebe said.

“Microplastics are now ubiquitous in the environment, they’re in the air we breathe, the food we eat and the earth we walk on. The magnitude of the problem is bigger than previously thought.

“Of serious concern is the mounting evidence that microplastics are having a negative impact on human and animal health. There are not just physical, but chemical and biological impacts.”

Associate Professor Naebe’s team have taken the first steps in the project, analysing wastewater samples from commercial laundries with high-powered electron microscopes in their Geelong laboratory, part of the largest fibres and textiles research facility in Australia.

The team recently presented a new scientific paper at the Association of Universities for Textiles (AUTEX) Conference 2023, which started the important process of formally categorising these types of microplastics, as well as developing standard terminology and testing methods.

“Because our understanding of microplastics is still in its infancy, we needed to start right at the beginning,” Associate Professor Naebe said.

“We need to have a standard definition of what is a microplastic. Up to this point that has been lacking, which makes it difficult to compare and incorporate other studies in this area.

“We are now developing a systematic method for sampling and identifying microplastics in laundry wastewater. It has been tricky to measure the different sizes, but this is important information to have. For example, there are studies that suggest some sizes of microplastics are causing more issues in certain animals.

“The next step will be establishing an essential method to prevent the release of microplastics from textile laundering. This may involve a coating on the surface of the textile or better ways to collect the waste during the washing process.”

Simba Global Executive Chair Hiten Somaia said the company had a strong focus on sustainability, driven by the business’ purpose statement.

“We are proud to partner with Deakin University in what is the first significant research into textile microplastic pollution in Australia. What we are most excited about is sharing the results of this research with all other textile markets in Australia – including clothing – and putting an end to microplastic pollution from textiles.”

Source:

Deakin University

Stahl: New visual brand identity (c) Stahl
03.01.2024

Stahl: New visual brand identity

Stahl, a leader in speciality coatings and treatments for flexible substrates, announces the launch of its new visual brand identity, marking an important step in Stahl's strategic journey.

This transformative initiative marks the next step in Stahl's strategic journey, aligning the company’s visual brand identity with its purpose and strategic direction. In recent years, Stahl has been evolving its positioning and offering to meet the changing needs of its customers and markets and to drive the next phase of its growth. In particular, the rebranding project follows the recent acquisition of Stahl Packaging Coatings (formerly ICP Industrial Solutions Group) as well as the launch of Stahl’s new purpose: Touching lives, for a better world. The purpose encapsulates the company's commitment to making a positive impact on the world, reflecting not only Stahl’s proud heritage, but also its future influence as a leader in speciality coatings and treatments for flexible substrates.

Stahl has also introduced a new colour palette to help visualise and differentiate its activities and its approach to sustainability and other strategic topics.

Stahl, a leader in speciality coatings and treatments for flexible substrates, announces the launch of its new visual brand identity, marking an important step in Stahl's strategic journey.

This transformative initiative marks the next step in Stahl's strategic journey, aligning the company’s visual brand identity with its purpose and strategic direction. In recent years, Stahl has been evolving its positioning and offering to meet the changing needs of its customers and markets and to drive the next phase of its growth. In particular, the rebranding project follows the recent acquisition of Stahl Packaging Coatings (formerly ICP Industrial Solutions Group) as well as the launch of Stahl’s new purpose: Touching lives, for a better world. The purpose encapsulates the company's commitment to making a positive impact on the world, reflecting not only Stahl’s proud heritage, but also its future influence as a leader in speciality coatings and treatments for flexible substrates.

Stahl has also introduced a new colour palette to help visualise and differentiate its activities and its approach to sustainability and other strategic topics.

More information:
Stahl Coatings packaging
Source:

Stahl

Yanfeng and TactoTek partner to enhance future vehicle interior applications (c) Yanfeng
21.12.2023

Yanfeng and TactoTek partner to enhance future vehicle interior applications

Yanfeng, an automotive supplier, and TactoTek, a pioneer in smart surface technologies, will collaborate on the development of highly integrated Human Machine Interface (HMI) solutions for future Smart Cabin applications. The goal of this partnership is to combine advanced lighting, user interfaces, as well as various decorative trim with a deeply integrated product approach.

Yanfeng has made the strategic decision to integrate TactoTek's Injection Molded Structural Electronics (IMSE) portfolio as a technological layer in its worldwide Smart Cabin business. The intention is to enhance the overall user experience by offering advanced lighting features and introducing new functional elements like HMI, haptic feedback, and display integration.

This approach enables Yanfeng to align with emerging automotive industry trends, including autonomous driving, and addresses non-driving related tasks (NDRTs), thereby shaping the future of Smart Cabins and redefining the driving experience.

Yanfeng, an automotive supplier, and TactoTek, a pioneer in smart surface technologies, will collaborate on the development of highly integrated Human Machine Interface (HMI) solutions for future Smart Cabin applications. The goal of this partnership is to combine advanced lighting, user interfaces, as well as various decorative trim with a deeply integrated product approach.

Yanfeng has made the strategic decision to integrate TactoTek's Injection Molded Structural Electronics (IMSE) portfolio as a technological layer in its worldwide Smart Cabin business. The intention is to enhance the overall user experience by offering advanced lighting features and introducing new functional elements like HMI, haptic feedback, and display integration.

This approach enables Yanfeng to align with emerging automotive industry trends, including autonomous driving, and addresses non-driving related tasks (NDRTs), thereby shaping the future of Smart Cabins and redefining the driving experience.

This collaboration strives to create a unique in-vehicle user experience by accelerating seamless lighting integration into all surfaces of future vehicle interiors. The IMSE technology offers a fresh unique design and styling principles for slim, compact configurations and unconventional shapes.

Source:

Yanfeng International

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project (c) AZL Aachen GmbH
21.12.2023

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting not only served as a platform to foster new contacts and get informed about the expertise and interests of the consortium members in the field of hydrogen pressure vessels, but also laid the groundwork for steering the focus of the upc oming project's ambitious phases. As a basis for the interactive discussion session, AZL outlined the background, motivation and detailed work plan. The central issues of the dialogue were the primary objectives, the most pressing challenges, the contribut ion to competitiveness, and
the priorities that would best meet the expectations of the project partners.

Discussions covered regulatory issues, the evolving value chain and the supply and properties of key materials such as carbon and glass fibres and resins. The consortium defined investigations into different manufacturing technologies, assessing their matu rity and potential benefits. Design layouts, including liners, boss designs and winding patterns, were thoroughly considered, taking into account their implications for mobile and stationary storage. The group is also interested in cost effective testing m ethods and certification processes, as well as the prospects for recycling into continuous fibres and the use of sustainable materials. Insight was requested into future demand for hydrogen tanks, OEM needs and strategies, and technological developments to produce more economical tanks.

The meeting highlighted the importance of CAE designs for fibre patterns, software suitability and the application dependent use of thermoset and thermoplastic designs.

The first report meeting will also set the stage of the next project phase, which will be the creation of reference designs by AZL's engineering team. These designs will cover a range of pressure vessel configurations using a variety of materials and production concepts. The aim is to develop models that not only re flect current technological capabilities, but also provide deep insight into the cost analysis of different production technologies, their CO2 footprint, recycling aspects and scalability.

AZL's project remains open to additional participants. Companies interested in joining this initiative are invited to contact Philipp Fröhlig.