From the Sector

Reset
143 results
26.03.2024

CARBIOS joins Paris Good Fashion

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS will be particularly involved in the association's project to set up a working group dedicated to the development of a "fiber-to-fiber" industry, one of Paris Good Fashion's top priorities over the next five years. While only 1% of textiles are currently recycled fiber-to-fiber (circular), this working group will identify levers for significantly increasing the share of recycled fibers in the industry.  Polyester currently follows a linear model from which we need to break out: virgin polyester is made from petroleum, and recycled polyester from PET bottles. After use, most of these products end their lives in landfill or incineration. A circular, "fiber-to-fiber" industry will give new life to textiles and reduce the environmental impact associated to their end-of-life management.

Source:

Carbios

18.03.2024

Lenzing: Combined annual and sustainability report 2023

  • Combination of financial and non-financial reporting as evidence of the central role of sustainability
  • Measurable progress in achieving sustainability and climate targets
  • Recognized for sustainability and prepares for the European Green Deal

The Lenzing Group has published a combined annual and sustainability report for the first time, reaffirming the strategic importance of social and environmental responsibility for the company. With the title “Ready to join?”, Lenzing would like to extend an invitation to all customers and partners to join forces to renew the textile and nonwovens industries and bring about positive change.

“This annual and sustainability report is also an invitation to find answers together. Lenzing is working tirelessly to make the industries in which it operates even more sustainable and to drive the transformation of the textile business model from linear to circular. For this transformation to be successful, further efforts by the entire industry and a policy designed to ensure a level playing field for sustainability pioneers are needed,” says Stephan Sielaff, CEO of the Lenzing Group.

  • Combination of financial and non-financial reporting as evidence of the central role of sustainability
  • Measurable progress in achieving sustainability and climate targets
  • Recognized for sustainability and prepares for the European Green Deal

The Lenzing Group has published a combined annual and sustainability report for the first time, reaffirming the strategic importance of social and environmental responsibility for the company. With the title “Ready to join?”, Lenzing would like to extend an invitation to all customers and partners to join forces to renew the textile and nonwovens industries and bring about positive change.

“This annual and sustainability report is also an invitation to find answers together. Lenzing is working tirelessly to make the industries in which it operates even more sustainable and to drive the transformation of the textile business model from linear to circular. For this transformation to be successful, further efforts by the entire industry and a policy designed to ensure a level playing field for sustainability pioneers are needed,” says Stephan Sielaff, CEO of the Lenzing Group.

The results for the 2023 financial year were already published. The report was once again prepared in digital form and is now available.

Source:

Lenzing AG

RegioGreenTex Annual Consortium Meeting Photo Euratex
13.03.2024

RegioGreenTex Annual Consortium Meeting in Portugal

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

EURATEX, as project coordinator, ensures the successful implementation of this ambitious initiative. Dirk Vantyghem, EURATEX Director General, commented: “RegioGreenTex is an essential piece of our wider plan to implement the EU Sustainable Textile Strategy. Offering investment support to our SMEs is critical to make this green transition a success.”

Source:

Euratex

KARL MAYER and Grabher: Competence platform for wearables (c) KARL MAYER GROUP
13.03.2024

KARL MAYER and Grabher: Competence platform for wearables

KARL MAYER has already produced a wide range of electrically conductive warp-knitted items for a wide variety of applications in the TEXTILE-CIRCUIT division of its TEXTILE MAKERSPACE, including a sensor shirt, a gesture control system and a conductive charging station. In order to drive the topic of wearables forward, the textile machine manufacturer has signed a cooperation agreement with the Grabher Group and delivered an MJ 52/1-S to the specialist for high-tech textiles in Lustenau. Managing Director Günter Grabher officially inaugurated the key machine for project work in the smart textiles sector in May 2023.

The machine is involved in various research projects, but is also available for new projects and tasks. The smart textiles competence team at KARL MAYER and Grabher is looking forward to supporting the ideas and work of interested parties also outside the research network with its know-how and the possibilities of the MJ 52/1-S.

KARL MAYER has already produced a wide range of electrically conductive warp-knitted items for a wide variety of applications in the TEXTILE-CIRCUIT division of its TEXTILE MAKERSPACE, including a sensor shirt, a gesture control system and a conductive charging station. In order to drive the topic of wearables forward, the textile machine manufacturer has signed a cooperation agreement with the Grabher Group and delivered an MJ 52/1-S to the specialist for high-tech textiles in Lustenau. Managing Director Günter Grabher officially inaugurated the key machine for project work in the smart textiles sector in May 2023.

The machine is involved in various research projects, but is also available for new projects and tasks. The smart textiles competence team at KARL MAYER and Grabher is looking forward to supporting the ideas and work of interested parties also outside the research network with its know-how and the possibilities of the MJ 52/1-S.

The MJ 52/1 S is also an extremely flexible project machine. The 138″ model in gauge E 28 produces a wide range of warp-knitted fabrics and incorporates conductive material directly into the textile surface - exactly where it is needed and with the structure that is required. The basis for the tailor-made fiber placement is KARL MAYER's string bar technology. The system for controlling the pattern guide bars ensures a fast, established textile production process and a high degree of pattern freedom.

Source:

KARL MAYER GROUP

01.03.2024

Autoneum: New Business Unit for Commercial Vehicles

Autoneum has established a new Business Unit Commercial Vehicles to expand its existing truck business and to increase revenue and profitability in this vehicle segment as part of the Group’s strategic focus on profitable growth. To begin with, the Business Unit will focus on the commercial vehicles business in Europe and South America, as these two regions have a comparable customer base. The Business Unit is responsible for the global commercial vehicles business development, while its financial results will be consolidated within the Business Groups.

Autoneum has established a new Business Unit Commercial Vehicles to expand its existing truck business and to increase revenue and profitability in this vehicle segment as part of the Group’s strategic focus on profitable growth. To begin with, the Business Unit will focus on the commercial vehicles business in Europe and South America, as these two regions have a comparable customer base. The Business Unit is responsible for the global commercial vehicles business development, while its financial results will be consolidated within the Business Groups.

The new Business Unit focuses primarily on the business with components for medium and heavy trucks as well as agricultural commercial vehicles. Following the acquisition of Borgers Automotive in April last year, Autoneum has significantly expanded its product and technology portfolio for these vehicle segments. In combination with the Company’s global presence and diversified customer structure, this provides an ideal basis for future profitable growth. Autoneum already operates plants which manufacture products for the exterior and interior of commercial vehicles in Belgium, Czech Republic, France, Germany and Poland, as well as in Brazil. With the creation of a dedicated Business Unit Commercial Vehicles, Autoneum aims to leverage its existing production footprint in order to further grow the business worldwide.

As with the product portfolio for light vehicles, Autoneum’s multifunctional, lightweight and sustainable systems and components are suitable for commercial vehicles of all drive types. Autoneum is therefore well positioned for the expected increase in electric models due to more stringent environmental regulations.

More information:
Autoneum Automotive acoustic
Source:

Autoneum

26.02.2024

SGL Carbon: Review of options for Business Unit Carbon Fibers

SGL Carbon SE is currently evaluating various strategic options for the Business Unit Carbon Fibers (CF). These include a possible partial or complete divestment of the Business Unit. In a first step, potential interested parties shall be approached with the general data of the Business Unit to determine their interest in an acquisition. If there is sufficient interest, a structured transaction process will be carried out in a second step. Overall, a share of sales amounting to around € 179.6 million after nine months in 2023 (9M 2022: € 269.0 million) is therefore under review. The CF sales share corresponded to 21.9% of SGL Carbon's consolidated sales after nine months in 2023 (9M 2022: 31.5%). Adjusted EBITDA of the Business Unit excluding the result from joint ventures amounted to minus € 10,9 million after nine months in 2023 (9M 2022: € 27,9 million). Despite the operating loss of CF after nine months in 2023, SGL Carbon maintains its guidance for fiscal year 2023. This shows the positive development of the three other business units and the resilience of SGL Carbon's business model.

SGL Carbon SE is currently evaluating various strategic options for the Business Unit Carbon Fibers (CF). These include a possible partial or complete divestment of the Business Unit. In a first step, potential interested parties shall be approached with the general data of the Business Unit to determine their interest in an acquisition. If there is sufficient interest, a structured transaction process will be carried out in a second step. Overall, a share of sales amounting to around € 179.6 million after nine months in 2023 (9M 2022: € 269.0 million) is therefore under review. The CF sales share corresponded to 21.9% of SGL Carbon's consolidated sales after nine months in 2023 (9M 2022: 31.5%). Adjusted EBITDA of the Business Unit excluding the result from joint ventures amounted to minus € 10,9 million after nine months in 2023 (9M 2022: € 27,9 million). Despite the operating loss of CF after nine months in 2023, SGL Carbon maintains its guidance for fiscal year 2023. This shows the positive development of the three other business units and the resilience of SGL Carbon's business model.

Carbon Fibers manufactures textile, acrylic and carbon fibers as well as composite materials at seven locations in Europe and North America. Following the temporary drop in demand for carbon fibers from the important wind industry market, the Business Unit's sales and earnings fell significantly in the course of fiscal year 2023. Due to the importance of the wind industry for the European Green Deal, SGL Carbon and many experts assumed that the wind industry recovers quickly. Unfortunately, this is currently not the case. Even if demand picks up, the company assumes that Carbon Fibers will need additional resources to remain competitive in the international market environment and to exploit market opportunities in the best possible way. Against this background, SGL Carbon is reviewing all possibilities to support a positive further development of the Carbon Fibers Business Unit.

More information:
SGL Carbon carbon fibers
Source:

SGL Carbon SE 

19.02.2024

Lectra: Financial statements for 2023

  • Revenues: 477.6 million euros (-6%)
  • EBITDA before non-recurring items: 79.0 million euros (-15%)
  • Net income: 32.6 million euros (-26%)
  • Free cash flow before non-recurring items: 45.3 million euros
  • Dividend: €0.36 per share

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the fiscal year 2023. Audit procedures have been performed by the Statutory Auditors.

Currency changes between 2022 and 2023 mechanically decreased revenues and EBITDA before non-recurring items by 3.9 million euros (-3%) and 1.7 million euros (-8%) respectively in Q4, and by 11.2 million euros (-2%) and 4.8 million euros (-6%) respectively in the year, at actual exchange rates compared to like-for-like figures.

  • Revenues: 477.6 million euros (-6%)
  • EBITDA before non-recurring items: 79.0 million euros (-15%)
  • Net income: 32.6 million euros (-26%)
  • Free cash flow before non-recurring items: 45.3 million euros
  • Dividend: €0.36 per share

Lectra’s Board of Directors, chaired by Daniel Harari, reviewed the consolidated financial statements for the fiscal year 2023. Audit procedures have been performed by the Statutory Auditors.

Currency changes between 2022 and 2023 mechanically decreased revenues and EBITDA before non-recurring items by 3.9 million euros (-3%) and 1.7 million euros (-8%) respectively in Q4, and by 11.2 million euros (-2%) and 4.8 million euros (-6%) respectively in the year, at actual exchange rates compared to like-for-like figures.

OUTLOOK
While the 2023 full-year results were affected by the adverse environment, they also attest to the substantial improvement in the fundamentals of the Group's business model, which will have a positive impact on 2024 results. Persistent macroeconomic and geopolitical uncertainties could nevertheless continue to weigh on investment decisions by the Group's customers.

While the most recent indicators seem to suggest that the situation is unlikely to deteriorate further, the timing and magnitude of a rebound in new system orders remain uncertain.

Outlook for 2024
To facilitate analysis, the accounts of Lectra excluding the Launchmetrics acquisition ("Lectra 2023 Scope") will be analysed separately from the Launchmetrics accounts in 2024.

The Group has based its 2024 objectives on the exchange rates in effect on December 29, 2023, in particular $1.10/€1. When converting 2023 results using the exchange rates retained for 2024, 2023 revenues are mechanically reduced by 4.7 million euros (to 472.9 million euros) and 2023 EBITDA before non-recurring items is reduced by 2.2 million euros (to 76.8 million euros). Thus, for the Lectra 2023 Scope, the comparisons between 2024 and 2023 printed below are based on constant exchange rates.

At this early stage of 2024, continuing low visibility regarding orders and revenues from new systems makes it impossible to predict the actual timing and scale of the future rebound in this area. On the other hand, visibility is high for recurring revenues, which accounted for 68% of total revenues in 2023 and will continue to grow in 2024.

In light of the above, Lectra has set as its objective for 2024, for the Lectra 2023 Scope, to achieve revenues in the range of 480 to 530 million euros (+2% to +12%) and EBITDA before non-recurring items in the range of 85 to 107 million euros (+10% to +40%).

The low end of the revenues range is based on the absence of a rebound in new systems orders, which would remain stable in 2024 relative to 2023, with a 6% decline in revenues from perpetual software licenses, equipment and accompanying software and non-recurring services, as the order backlog was lower on December 31, 2023 than a year before.

The high end of the revenues range reflects a gradual rebound in new systems orders, which at year-end 2024 would be back to year-end 2022 level.
 
In addition, Launchmetrics revenues (for the consolidation period from January 23 to December 31) are projected to be in the range of 42 to 46 million euros, with an EBITDA margin before non-recurring items of more than 15% (assuming an exchange rate of $1.10/€1).

Messe Frankfurt launches brand events in Central Asia (c) Messe Frankfurt Group
16.02.2024

Messe Frankfurt launches brand events in Central Asia

Messe Frankfurt will extend its footprint in the Central Asian market by establishing seven brand events in Tashkent, Uzbekistan. The country’s strategic location as a crossroads of Europe and Asia positions it as a promising trade gateway and transportation hub, facilitating the economic development of neighbouring countries and access to the wider region. The company’s stronger presence in the market will promote business opportunities and foster the sustainable development of pillar industries, including cosmetics, textiles and clothing, automotive, logistics and transportation.

Messe Frankfurt will extend its footprint in the Central Asian market by establishing seven brand events in Tashkent, Uzbekistan. The country’s strategic location as a crossroads of Europe and Asia positions it as a promising trade gateway and transportation hub, facilitating the economic development of neighbouring countries and access to the wider region. The company’s stronger presence in the market will promote business opportunities and foster the sustainable development of pillar industries, including cosmetics, textiles and clothing, automotive, logistics and transportation.

Uzbekistan has a promising consumer market with significant potential. It is the largest in Central Asia and is expected to increase due to population growth, rising incomes and the modernisation of economic and industry sectors.
 
The nation has actively sought to diversify its economy in recent years, undertaking reforms for greater entrepreneurial freedom and opening up to more international and regional cooperation. The country already exports precious metals, textiles and agricultural produce. It imports machinery, equipment, means of transportation, and vehicle components from foreign trading partners. Attracting overseas investment is also apparent through incentives such as tax benefits, reduced import duties and simplified procedures for overseas investors.
 
In addition, shifting global supply chains and trading patterns could also drive opportunities in the region. The nation benefits from its geographical location owing to its position between Asia and Europe, to which the Uzbek Government recognises the prospects of investing in infrastructure, such as transportation and logistics, to create an efficient transit hub. Against this backdrop, China acknowledges the importance of developing routes along the Belt and Road while Europe has expressed a readiness to support Uzbekistan’s efforts to diversify transport corridors.

Line-up of shows include:

  • Automechanika Tashkent; Futuroad Expo Tashkent; and, Scalex Tashkent: 23 – 25 October 2024
  • Heimtextil Uzbekistan; Texworld Tashkent; and, Apparel Sourcing Tashkent: 6 – 8 November 2024
  • Beautyworld Central Asia: 21 – 23 November 2024
Source:

Messe Frankfurt (HK) Limited

05.02.2024

ECHA: Strategic goals for 2024-2028

The European Chemicals Agency (ECHA) has published its Strategy Statement 2024-2028. The strategy details the agency’s goals and priorities over the next five years to protect health and the environment through its work for chemical safety.

Main elements of the Strategy – Goals and Priorities

Be a trusted chemicals agency – ECHA aims to achieve this by delivering its legal mandate using independent expertise and robust data. The Agency, to support this, will:

  • Deliver transparent, independent, and high-quality scientific advice, opinions, and decisions;
  • Enhance decision and policy making through optimal use of data, knowledge, and competence; and
  • Facilitate the prioritisation and co-ordination of regulatory actions on substances and groups of substances with the European Commission (EC), EU agencies and Member State Authorities.

 
Respond to emerging challenges and changes in their legal landscape – ECHA will prepare for new tasks and inform EU chemical and environmental policy. To support this goal, it will focus on the following priorities:

The European Chemicals Agency (ECHA) has published its Strategy Statement 2024-2028. The strategy details the agency’s goals and priorities over the next five years to protect health and the environment through its work for chemical safety.

Main elements of the Strategy – Goals and Priorities

Be a trusted chemicals agency – ECHA aims to achieve this by delivering its legal mandate using independent expertise and robust data. The Agency, to support this, will:

  • Deliver transparent, independent, and high-quality scientific advice, opinions, and decisions;
  • Enhance decision and policy making through optimal use of data, knowledge, and competence; and
  • Facilitate the prioritisation and co-ordination of regulatory actions on substances and groups of substances with the European Commission (EC), EU agencies and Member State Authorities.

 
Respond to emerging challenges and changes in their legal landscape – ECHA will prepare for new tasks and inform EU chemical and environmental policy. To support this goal, it will focus on the following priorities:

  • Implement new legal requirements using existing and new synergies and experience;
  • Work with relevant EU agencies and bodies to deliver Chemical Strategy for Sustainability (CSS) actions and objectives; and
  • Provide scientific and technical advice on chemicals to EU policy makers.

 
Communicate and Engage – by collaborating with stakeholders and partners, ECHA will strengthen public confidence in chemicals regulation. In support of this goal, the Agency will:

  • Deepen their network of engagement with EU institutions and agencies and Member States;
  • Collaborate and provide tools, advice, and support to industry; and
  • Promote awareness and understanding of ECHA's work to stakeholders representing workers, the public and the environment.

 
Lead on chemical knowledge and expertise – the Agency will advance knowledge and understanding on chemical safety. To achieve this, it will:

  • Contribute proactively to expanding scientific and technical competence and knowledge on chemical safety;
  • Promote the development and use of alternative methods for the assessment of hazards and risks of chemicals; and
  • Support the EC to enhance engagement and synergies at international level.

 
Invest in people and organisational excellence – ECHA is committed to working together to achieve their vision. In order to achieve this they will:

  • Develop and empower their people for success;
  • Create optimal ways of working for the Agency, its bodies, its people, and the environment; and
  • Adopt an IT delivery model that is cost-effective, streamlined, modular, interoperable, cloud based and centralised.
Source:

European Chemicals Agency

22.01.2024

Fashion for Good addresses challenges of sorting for rewearable textiles

Fashion for Good's Sorting for Circularity framework expands to address the challenge of ensuring rewearable textiles remain in use as opposed to finding their way into global waste streams or landfills. This 18-month project tests automated sorting technologies using artificial intelligence and machine learning to optimise the sorting of rewearable garments and enable greater circularity.

This project will test automated sorting technologies using machine learning and artificial intelligence (AI) to collect product information — such as colour, style, garment type, and quality. This will enable sorters and brands to make better decisions and sort efficiently based on product data and criteria from local, European, and export resale market requirements, thus optimising the flow of textiles to achieve their highest value potential.

To ensure accuracy and representation in capturing data on the flow of textiles within the EU and export markets, this project will focus on specific geographical regions: Lithuania (Nordic/Baltic), the Netherlands (Western), Poland (Central-Eastern), and Spain (Southern Europe).

Fashion for Good's Sorting for Circularity framework expands to address the challenge of ensuring rewearable textiles remain in use as opposed to finding their way into global waste streams or landfills. This 18-month project tests automated sorting technologies using artificial intelligence and machine learning to optimise the sorting of rewearable garments and enable greater circularity.

This project will test automated sorting technologies using machine learning and artificial intelligence (AI) to collect product information — such as colour, style, garment type, and quality. This will enable sorters and brands to make better decisions and sort efficiently based on product data and criteria from local, European, and export resale market requirements, thus optimising the flow of textiles to achieve their highest value potential.

To ensure accuracy and representation in capturing data on the flow of textiles within the EU and export markets, this project will focus on specific geographical regions: Lithuania (Nordic/Baltic), the Netherlands (Western), Poland (Central-Eastern), and Spain (Southern Europe).

The findings will be shared in a report with a supporting business case and implementation roadmap to inform investment decisions in infrastructure, Circular Business Models (CBM) and repair centres.

The Rewear Project builds on Fashion for Good’s Sorting for Circularity framework initiated in 2021 and subsequently launched in Europe, India and the United States harmonising the collection, sorting and recycling industries in order to advance textile-to-textile recycling technologies and the resale industry.

It is funded by brand partners adidas, BESTSELLER, Bonprix, C&A, Inditex, Levi Strauss & Co., Otto Group, PVH Corp., and Zalando. Circle Economy Foundation leads the creation and implementation of the methodology, with support from Consumption Research Norway, Oslo Metropolitan University and Revaluate.

Source:

Fashion for Good 

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project (c) AZL Aachen GmbH
21.12.2023

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting not only served as a platform to foster new contacts and get informed about the expertise and interests of the consortium members in the field of hydrogen pressure vessels, but also laid the groundwork for steering the focus of the upc oming project's ambitious phases. As a basis for the interactive discussion session, AZL outlined the background, motivation and detailed work plan. The central issues of the dialogue were the primary objectives, the most pressing challenges, the contribut ion to competitiveness, and
the priorities that would best meet the expectations of the project partners.

Discussions covered regulatory issues, the evolving value chain and the supply and properties of key materials such as carbon and glass fibres and resins. The consortium defined investigations into different manufacturing technologies, assessing their matu rity and potential benefits. Design layouts, including liners, boss designs and winding patterns, were thoroughly considered, taking into account their implications for mobile and stationary storage. The group is also interested in cost effective testing m ethods and certification processes, as well as the prospects for recycling into continuous fibres and the use of sustainable materials. Insight was requested into future demand for hydrogen tanks, OEM needs and strategies, and technological developments to produce more economical tanks.

The meeting highlighted the importance of CAE designs for fibre patterns, software suitability and the application dependent use of thermoset and thermoplastic designs.

The first report meeting will also set the stage of the next project phase, which will be the creation of reference designs by AZL's engineering team. These designs will cover a range of pressure vessel configurations using a variety of materials and production concepts. The aim is to develop models that not only re flect current technological capabilities, but also provide deep insight into the cost analysis of different production technologies, their CO2 footprint, recycling aspects and scalability.

AZL's project remains open to additional participants. Companies interested in joining this initiative are invited to contact Philipp Fröhlig.

19.12.2023

Euratex Manifesto: 15 requests for competitiveness and resilience

2024 is a turning point for the European textiles and clothing industry: From 6 to 9 June 2024, European citizens will vote for a new European Parliament and, based on the results, a new European Commission will be formed. In view of this important election, EURATEX publishes a Manifesto, presenting 15 requests which will help to ensure a competitive European textiles and clothing industry.

The textile and apparel industry is making a substantial contribution to European wealth, jobs and growth. Europe counts 192,000 companies employing 1.3 million workers with a turnover of €167 billion and over €67 billion of exports. Entrepreneurship should be recognised as the foundation for a competitive textile industry, offering high quality and sustainable products, based on innovation, creativity and design. European policy makers should recognise such role to textiles and apparel companies and have an open dialogue to create better framework conditions to operate in the internal and global markets.

2024 is a turning point for the European textiles and clothing industry: From 6 to 9 June 2024, European citizens will vote for a new European Parliament and, based on the results, a new European Commission will be formed. In view of this important election, EURATEX publishes a Manifesto, presenting 15 requests which will help to ensure a competitive European textiles and clothing industry.

The textile and apparel industry is making a substantial contribution to European wealth, jobs and growth. Europe counts 192,000 companies employing 1.3 million workers with a turnover of €167 billion and over €67 billion of exports. Entrepreneurship should be recognised as the foundation for a competitive textile industry, offering high quality and sustainable products, based on innovation, creativity and design. European policy makers should recognise such role to textiles and apparel companies and have an open dialogue to create better framework conditions to operate in the internal and global markets.

To realise that vision, the industry and policy makers need to work together on a mix of policy measures and initiatives, which are coherent and offer a transparent and predictable framework for our companies, and make them more resilient and competitive.

These policies should focus around four points:

Develop and implement a “smart” EU industrial policy
Europe should create policies which enhance competitiveness, instead of creating administrative burdens. To EURATEX, each new piece of legislation should undergo a “competitiveness test” to critically look at the impact of the new rules. Europe should also create a favourable environment to promote education and jobs in the industry. The EU textile industry currently employees 1,3 million people, 30% of which is above 50 years old. A critical bottleneck for the textile industry is to attract (young) people and make sure these people have the right set of skills, to operate in a changing textile ecosystem. EURATEX also asks the EU to invest in innovation and digitalisation as they are key to the European competitive advantage. Not only, as the last years have proved, Europe should provide companies with access to sustainable energy at lower prices.

No sustainability without competitiveness
The EU Strategy for Sustainable Textiles is pushing our sector towards new business models with a lower environmental footprint. To realise that ambition, no less than 16 regulatory proposals are on the table, each of them with a different timetable, managed by different departments of the European Commission. EURATEX is committed to sustainability, but asks for economic realism. This set of new regulations needs to be coherent, enforceable, feasible and applicable for SMEs, and not push textile companies out of the market. Moreover, some member states are moving forward faster and some legislations will be decided at national level, creating fragmentation of the market. Such scenarios will hamper Europe and its possibilities to grow.

Ensure free and fair trade
With $224 billion in sold merchandise, Europe is the second major world exporters of textiles and clothes after China ($321 billion). It is therefore important that the global market should be open, free and fair for our industry to continue to thrive. Besides the support to FTAs in general, EURATEX wants to emphasise that all trade agreements should offer effective market access for EU companies and a level playing field in these markets. A free and open market should go hand in hand also with protection against free riders. The EU must always consider enforcement and enforceability when making new laws; it should also take action together with the member states for a better coordination with harmonised criteria for action among Customs Authorities.

Incentivise the Demand for sustainable textiles
Sustainable textile products typically come at a premium price, making it difficult for many consumers and buyers to purchase such products. Many surveys across Europe confirm that around 50% of interviewees do not purchase sustainable fashion products and the main reason is price. EURATEX believes that, to create a demand and help consumers to buy a (genuine) sustainable textile product, there should be standard requirements and fiscal incentives. Public authorities should also implement green public procurements, by increasing the importance of sustainability criteria in their evaluation grids.

Priyam Patel at Pixabay
12.12.2023

Select Committee: Reset Economic Relationship with The People's Republic of China

The House Select Committee on the Strategic Competition Between the United States and the Chinese Communist Party, led by Chairman Mike Gallagher (R-WI) and Ranking Member Raja Krishnamoorthi (D-IL), adopted nearly 150 policy recommendations in a bipartisan report that outlines a strategy to fundamentally reset the United States' economic and technological competition with the People's Republic of China.

The House Select Committee on the Strategic Competition Between the United States and the Chinese Communist Party, led by Chairman Mike Gallagher (R-WI) and Ranking Member Raja Krishnamoorthi (D-IL), adopted nearly 150 policy recommendations in a bipartisan report that outlines a strategy to fundamentally reset the United States' economic and technological competition with the People's Republic of China.

After the adoption of the policy recommendations on an bipartisan basis, Chairman Gallagher and Ranking Member Krishnamoorthi said, “With this report, the Select Committee has shown that the bipartisan will exists to meet the call of history. It embraces the clear reality that our current economic relationship with the People's Republic of China needs to be reset in order to serve the economic and national security interests of the United States, while offering nearly 150 bipartisan recommendations for Congress to legislate. Collectively, these recommendations will reset the terms of our relationship with the PRC, prevent the flow of American capital and technology from supporting its military advances and human rights abuses, and build collective economic resilience in concert with our allies and partners while ensuring American leadership for decades to come."

Members of the Select Committee spent the past year investigating the CCP's decades-long campaign of economic and technological warfare. The members define three key pillars that inform each recommendation and the United States' path to correct 30 years of misguided policy:

  • RESET: Reset the Terms of Our Economic Relationship with the People's Republic of China.
  • PREVENT: Stem the Flow of U.S. Capital and Technology Fueling the People's Republic of China's Military Modernization and Human Rights Abuses
  • BUILD: Invest in Technological Leadership and Build Collective Economic Resilience in Concert with Allies
More information:
China USA
Source:

NCTO / The Select Committee on the CCP

08.12.2023

EURATEX welcomes approval of PanEuroMed rules of origin

EURATEX welcomes the unanimous vote in support of the new rules of origin under the PEM Convention, as a historic achievement. Facilitating trade and investments in the “PanEuroMed” region (covering 27 EU member states and 24 partner countries in the neighbourhood region)1 is top priority region for the EU, as trade with these countries accounted for €677 billion in 2023. For the EU textile and clothing sector, the region represents 35% of its exports and 21% of its imports.
 
In 2013 the European Commission adopted a package of proposals aimed at increasing trade between the European Union and neighbouring countries in the Pan-Euro-Mediterranean (PEM) region. The proposal introduced modernised rules of origin of the PEM convention, lifting the prohibition of duty-drawback and introducing the principle of “full cumulation”.

EURATEX welcomes the unanimous vote in support of the new rules of origin under the PEM Convention, as a historic achievement. Facilitating trade and investments in the “PanEuroMed” region (covering 27 EU member states and 24 partner countries in the neighbourhood region)1 is top priority region for the EU, as trade with these countries accounted for €677 billion in 2023. For the EU textile and clothing sector, the region represents 35% of its exports and 21% of its imports.
 
In 2013 the European Commission adopted a package of proposals aimed at increasing trade between the European Union and neighbouring countries in the Pan-Euro-Mediterranean (PEM) region. The proposal introduced modernised rules of origin of the PEM convention, lifting the prohibition of duty-drawback and introducing the principle of “full cumulation”.

Today, after ten years of intense negotiations which EURATEX supported, the European Commission reached a full and final agreement with all PEM partners. This is a landmark achievement that will unlock the full potential of the Euro-Mediterranean area as the biggest and most integrated region of advanced manufacturing and trading of sustainable textiles and clothing. The rules adopted today will accelerate the integration of T&C supply chains and boost T&C production and trade within the region, both in the East and Southern borders of the EU. In a moment when companies are looking at moving their production from Asia to nearby, like-minded and more reliable countries , it is very timely to have the PEM Convention implemented.

EURATEX’s President, Mr Alberto Paccanelli, commented: “This is a strategic trade deal that can help European companies recover from the multiple crisis which we face since 2020”. He continued “We call on the European Union to not stop here, but keep up the efforts to secure trade deals that are good for European companies and their competitive position in the world. The next objective should be the adoption of the EU-Mercosur Agreement and a conclusive settlement of all trade disputes with the United States”.    
 
According to Director General Dirk Vantyghem, “today’s unanimous vote in favour of the modernised PEM rules is good news for our industry.. We should now engage with these partner countries to fully exploit the potential of these new rules. EURATEX is ready to engage in an industrial dialogue with the companies from the PEM Countries to facilitate their transition to the new framework”.

1 The PanEuroMed contracting parties are: the EU, the EFTA States (Switzerland, Norway, Iceland and Liechtenstein), the Faroe Islands, the participants in the Barcelona Process (Algeria, Egypt, Israel, Jordan, Lebanon, Morocco, the territories of West Bank and Gaza, Syria, Tunisia and Turkey), the participants in the EU's Stabilisation and Association Process (Albania, Bosnia and Herzegovina, the Republic of North Macedonia, Montenegro, Serbia, Kosovo), the Republic of Moldova, Ukraine.

Source:

EURATEX 

03.11.2023

Lenzing implements performance program in response to lack of market recovery

  • Revenue of EUR 1.87 bn and EBITDA of EUR 219.1 mn in the first three quarters of 2023
  • Positive free cash flow of EUR 27.3 mn in the third quarter
  • Implementation of performance program focusing on positive free cash flow, strengthened sales and margin growth and sustainable cost excellence
  • Modernization and conversion of Indonesian site successfully completed – EU Ecolabel received

The anticipated recovery in markets relevant for the Lenzing Group has to date failed to materialize. The continued sharp increase in raw material and energy costs on the one hand and very subdued demand on the other had a negative impact on Lenzing’s business trends as well as on industry as a whole during the reporting period.

  • Revenue of EUR 1.87 bn and EBITDA of EUR 219.1 mn in the first three quarters of 2023
  • Positive free cash flow of EUR 27.3 mn in the third quarter
  • Implementation of performance program focusing on positive free cash flow, strengthened sales and margin growth and sustainable cost excellence
  • Modernization and conversion of Indonesian site successfully completed – EU Ecolabel received

The anticipated recovery in markets relevant for the Lenzing Group has to date failed to materialize. The continued sharp increase in raw material and energy costs on the one hand and very subdued demand on the other had a negative impact on Lenzing’s business trends as well as on industry as a whole during the reporting period.

Revenue in the first three quarters of 2023 decreased by 5.3 percent year-on-year to EUR 1.87 bn. This reduction was primarily due to lower fiber revenues, while pulp revenues were up. The earnings trend was mainly influenced by the market environment. As a consequence, earnings before interest, tax, depreciation and amortization (EBITDA) in the reporting period decreased by 16.7 percent year-on-year to EUR 219.1 mn. The net result after tax amounted to minus EUR 96.7 mn (compared with EUR 74.9 mn in the first three quarters of 2022), while earnings per share amounted to minus EUR 4.90 (compared with EUR 2.16 in the first three quarters of 2022).

Outlook
According to the IMF, a full return of the global economy to pre-pandemic growth rates appears increasingly out of reach in the coming quarters. In addition to the consequences of the pandemic and the ongoing war in Ukraine, growth is also being influenced by restrictive monetary policy and extreme weather events. The consequences of the renewed military confrontation in the Middle East are not yet foreseeable. Overall, the IMF warns of greater risks to global financial stability, and expects the growth rate to decrease to 3 percent this year and to 2.9 percent next year.

The currency environment is expected to remain volatile in the regions of relevance to Lenzing.

The general market environment is continuing to weigh on the consumer climate and on sentiment in the industries relevant to Lenzing.

In the trend-setting market for cotton, the current 2023/24 crop season is emerging as a further 1.7 mn tonnes of inventory build-up, following 1.8 mn tonnes of inventory build-up in the previous season.

Earnings visibility remains severely limited overall.

Lenzing is fully on track with the implementation of the reorganization and cost reduction program and on this basis is implementing a comprehensive performance program focused on positive free cash flow, strengthened sales and margin growth as well as sustainable cost excellence. The overarching goal is to position Lenzing even more strongly and to further increase its crisis resilience.

In structural terms, Lenzing continues to anticipate growth in demand for environmentally responsible fibers for the textile and clothing industry as well as the hygiene and medical sectors. As a consequence, Lenzing is very well positioned with its “Better Growth” strategy and plans to continue driving growth with specialty fibers as well as its sustainability goals, including the trans-formation from a linear to a circular economy model.

The successful implementation of the key projects in Thailand and Brazil as well as the investment projects in China and Indonesia will further strengthen Lenzing’s positioning in this respect.

Taking the aforementioned factors into consideration, the Lenzing Group continues to expect that EBITDA for the 2023 financial year will lie in a range between EUR 270 mn and EUR 330 mn.

Source:

Lenzing AG

10.10.2023

Textile & Fashion Forum Helsinki 2023

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023 will focus on critical industry themes. The transformation of the textile and fashion industry relies on three key pillars: the creation of different circular business models matching growth with sustainability, a green and digital transition where information technology is necessary to deliver sustainability, and scaling the business, as how start-ups can make a leap and big companies can evolve their growth strategies. These three themes will be discussed in depth during the event.

The speaker lineup, drawn from Finland, Europe and beyond, demonstrates the expertise connecting on this platform. Noteworthy figures include Tiina Alahuhta-Kasko, President & CEO of Marimekko; Kai Mykkänen, Minister of Climate and the Environment of Finland; Marcus Hartmann, Head of Public Affairs & Sustainability at H&M; Liljana K. Forssten, Range Strategist at IKEA; and Virginijus Sinkevičius, European Commissioner (on video).

Source:

Euratex & Finnish Textile & Fashion

06.10.2023

Accelerating Circularity launches Alliance of Chemical Textile Recycling (ACTR) with key members

The mission of Accelerating Circularity is to create new supply chains and business models to turn textile waste into mainstream raw materials. Accelerating Circularity has created a working group, the Alliance of Textile Chemical Recyclers (ACTR), to meet and address the textile industry with a common voice to facilitate accurate information on textile chemical recycling.

“We formed this collective to move chemical recycling technology forward, share common definitions, and address policies in a collaborative way to maximize the elimination of textile waste to landfills and incineration” explained Karla Magruder, Founder and President of Accelerating Circularity. “Chemical recycling technology has many benefits, including quality more similar to virgin fiber and the ability to recycle multiple times.”

ACTR plans to provide the industry with information on how textile chemical recycling can:

The mission of Accelerating Circularity is to create new supply chains and business models to turn textile waste into mainstream raw materials. Accelerating Circularity has created a working group, the Alliance of Textile Chemical Recyclers (ACTR), to meet and address the textile industry with a common voice to facilitate accurate information on textile chemical recycling.

“We formed this collective to move chemical recycling technology forward, share common definitions, and address policies in a collaborative way to maximize the elimination of textile waste to landfills and incineration” explained Karla Magruder, Founder and President of Accelerating Circularity. “Chemical recycling technology has many benefits, including quality more similar to virgin fiber and the ability to recycle multiple times.”

ACTR plans to provide the industry with information on how textile chemical recycling can:

  • offer solutions for diverting textile waste to landfill
  • enable textile to textile recycling versus incineration/landfill
  • provide sustainably sourced/circular materials
  • support brand/retailers/producers in achieving their CO2 reduction targets
  • provide long term price stability and consistent supply of raw materials versus virgin

Members of the Alliance include founding members Eastman, Lenzing, and The LYCRA Company, as well as key innovators Circ®, Sappi, Renewcell, Infinited fiber, Worn Again Technologies, Gr3n, CuRe Technology, and OnceMore® from Sodra.

As a first step, the ACTR (Alliance of Chemical Textile Recycling) is introducing a dictionary of common terms developed to educate the industry on the chemical recycling of textiles.

05.10.2023

EURATEX and CIE warn EU Presidency about de-industrialised Europe

Ahead of the extra-ordinary Council on 6 October in Granada, EURATEX President, Alberto Paccanelli, and CIE President, Jose Vte Serna, call on the EU Presidency to develop a new competitiveness strategy, which can relaunch the European industry and ensure it will remain competitive in the decades to come. This means bringing together trade, energy, state aid and sustainability policies into a single, integrated, comprehensive approach, which can support a robust and modern European manufacturing industry.  
 
To consolidate a strong industrial structure in Europe, the Union should

Ahead of the extra-ordinary Council on 6 October in Granada, EURATEX President, Alberto Paccanelli, and CIE President, Jose Vte Serna, call on the EU Presidency to develop a new competitiveness strategy, which can relaunch the European industry and ensure it will remain competitive in the decades to come. This means bringing together trade, energy, state aid and sustainability policies into a single, integrated, comprehensive approach, which can support a robust and modern European manufacturing industry.  
 
To consolidate a strong industrial structure in Europe, the Union should

  1. secure the supply of clean energy at a competitive cost;
  2. support innovation and foster the necessary talent pool and
  3. be more assertive in achieving an international level-playing field on sustainability, based on the European model.  

During the past few years the implementation of incoherent and conflicting objectives under the trade, energy, industrial and sustainability policy has been observed. As a matter of fact, while the circular economy promised to be a recipe for a competitive industry of the future, the likelihood of pushing the EU industry out of the market and driving investment elsewhere than in Europe is very high. If this approach were to continue in the next years, it will result in a de-industrialised Europe, depending on imports from abroad. Such a Europe would be more exposed to geopolitical turmoil, with no agency to deliver its vision of peace, well-being and a healthy environment to its citizens.

It is fundamental for Europe to pursue a more coherent set of policies that put the competitiveness of its domestic industry at the core. In this context, all the industrial manufacturing sectors should be in the scope, including the textile industry, given its importance in providing essential products and applications to our society. A first impactful action that can be taken in this direction, would be to expand the scope of the Net-Zero Industry Act (NZIA) to include the textiles and clothing industry.
 
The history of European industry is fully woven in the birth and expansion of the European textiles industry since the XVIII century. Still today, the European textiles and clothing industry holds a pivotal position in the market, encompassing a diverse range of sectors and applications. In terms of employment, our industry creates 1,3 million direct jobs in Europe, encompassing a wide range of roles, from design and production to distribution and retail. European textiles have a wide range of applications, the most common one is of course clothing and fashion. The industry has a long history of producing high-quality apparel, with various regions specializing in specific niches.
 
Beyond clothing, there is a wide range of industrial sectors were textiles play an essential role, including  Automotive (used for upholstery, interior components, and even lightweight composite materials), Aircraft and Shipbuilding (where textiles are employed for their lightweight and high-strength properties, to enhance fuel efficiency, reduce emissions, and improve overall performance), Building and Construction (insulation, roofing, geotextiles, and architectural textiles), or Personal Protective Equipment, for medical personnel, firefighters, police and army officers. This includes masks, gowns, uniforms, helmets, and fire-resistant clothing, ensuring safety in hazardous environments.
 
Textiles are essential components of our society and our well-being. It is key for Europe to maintain its capacity to manufacture high-quality, sustainable and high-technology textiles.  With this in mind, the competitiveness policy of the future and the related funds to support it, should include the textile ecosystem in its scope.  

 

More information:
Euratex EU council Policy Hub
Source:

Euratex

One-third increase in exhibitors at Cinte Techtextil China 2023 (c) Messe Frankfurt (HK) Ltd
04.10.2023

One-third increase in exhibitors at Cinte Techtextil China 2023

Since the rapid growth brought about by the pandemic, the technical textiles and nonwovens markets are stabilising towards a new normal – one in which technological innovation, sustainable development, and intelligent manufacturing are the most sought-after qualities. Held from 19 – 21 September 2023 at the Shanghai New International Expo Centre, the fair amplified this new industry direction, both through its fringe programme and across the booths of the 40,000 sqm show floor. With a nearly one-third increase from 2021, 467 exhibitors representing 13 countries and regions engaged a significantly international visitor flow, numbering 15,542 total visits from 52 countries and regions. Suppliers showcased up-to-date products for multiple application areas, with various equipment, technical textiles and nonwovens for agriculture, automotive, protective apparel, and medical and hygiene especially prevalent.

Since the rapid growth brought about by the pandemic, the technical textiles and nonwovens markets are stabilising towards a new normal – one in which technological innovation, sustainable development, and intelligent manufacturing are the most sought-after qualities. Held from 19 – 21 September 2023 at the Shanghai New International Expo Centre, the fair amplified this new industry direction, both through its fringe programme and across the booths of the 40,000 sqm show floor. With a nearly one-third increase from 2021, 467 exhibitors representing 13 countries and regions engaged a significantly international visitor flow, numbering 15,542 total visits from 52 countries and regions. Suppliers showcased up-to-date products for multiple application areas, with various equipment, technical textiles and nonwovens for agriculture, automotive, protective apparel, and medical and hygiene especially prevalent.

Speaking at the fair’s close, Ms Wilmet Shea, General Manager of Messe Frankfurt (HK) Ltd, had an optimistic outlook for the future of the sector: “Sustainability and innovation often go hand-in-hand, and walking through the various halls, zones, and pavilions these past few days the evidence for this was widespread. With environmental protection more important than ever, and buyers across application areas increasingly sourcing eco-friendly solutions, our exhibitors were well-placed to meet that demand. This fair is consistently at the leading edge of technological progress, and with the global and domestic markets showing signs of improving further, we are already looking forward to what we can offer at next year’s edition.”  

With many overseas exhibitors making a comeback, this year’s fair was marked by the return of the Taiwan Pavilion and the 40-exhibitor strong European Zone. Beyond the international areas, domestic pavilions were organised by Beijing Guanghua, China Hang Tang Group, Funing, Jiujing, Shenda, Tiantai, Xianto, and Xiqiao, showcasing nonwovens for various sub-sectors, including filtration and medical. Valuable insights were exchanged at multiple fringe events, including the 11th China International Nonwovens Conference, the Advanced Technical Textiles Industry Chain Synergistic Innovation Development Forum, various events covering marine textiles and rope netting, and the “Kingsafe Dangs” National University Students' Nonwovens Development and Applications Showcase. Visitors, meanwhile, were pleased with the innovation on show across the entire platform.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

Istanbul Fashion Connection 2023 again successful Photo: IFCO
08.09.2023

Istanbul Fashion Connection 2023 again successful

With over 400 exhibitors, the fourth Istanbul Fashion Connection event from August 9-11, 2023, at the Istanbul Expo Center on 35,000 sqm was again successful.

With over 20,000 visitors from more than 125 countries, IFCO recorded an increase in visitors of over 30% compared to August last year. International visitors more than doubled, with the largest visitor groups coming from Asia and the Middle East at 33% each, Europe at 17%, Africa 11% and the Americas at 6%.

All retail channels were represented at the show, from large shopping mall and department store groups to wholesalers, international retail chains, multi-brand boutiques and online platforms.

Exhibitors
In six clearly segmented halls, more than 400 brands presented themselves on 35,000 sqm from womenswear, menswear, kidswear sportswear, denim, leather and fur.

With over 400 exhibitors, the fourth Istanbul Fashion Connection event from August 9-11, 2023, at the Istanbul Expo Center on 35,000 sqm was again successful.

With over 20,000 visitors from more than 125 countries, IFCO recorded an increase in visitors of over 30% compared to August last year. International visitors more than doubled, with the largest visitor groups coming from Asia and the Middle East at 33% each, Europe at 17%, Africa 11% and the Americas at 6%.

All retail channels were represented at the show, from large shopping mall and department store groups to wholesalers, international retail chains, multi-brand boutiques and online platforms.

Exhibitors
In six clearly segmented halls, more than 400 brands presented themselves on 35,000 sqm from womenswear, menswear, kidswear sportswear, denim, leather and fur.

The Core Istanbul
For the second time, the exclusive design area The Core Istanbul, originally launched as part of Istanbul Fashion Week, presented itself at IFCO. Among others, Arzu Kaprol, Ceren Ocak, Çiğdem Akın, Essin Barış, Ezgi Karayel, Fulyaİlkmen - F.ILKK, Mehmet Emiroğlu, Meltem Özbek, Mert Erkan, Merve Ulu - Kuela, Murat Aytulum, Nejla Güvenç - Nej, Özlem Erkan, Selin Küçüksöz, Tuba Ergin joined the show. Menswear was also represented with Emre Erdemoğlu, Seydullah Yılmaz - SYHZ Wear and Yakup Biçer - Y Plus.

The Exclusive Area
Leading Turkish retail brands, already internationally active, showed in The Exclusive Area such as B&G Store, Climber BC, Damat, Giovane Gentile, Hatemoğlu, Ipekyol, Kayra, Kiğılı, Lee Cooper, Lufian, Jakamen, Naramaxx and convinced with their high quality, sustainable and fashionable products, which were in great demand among international buyers. Jakamen opened the IFCO Shows on the first day of the fair with its latest spring / summer collection for 2024.

FashionIst
With its own catwalk, the occasion fashion section FashionIst for women and men featured thirty leading brands and showed a cross-section of the latest designs in evening fashion with their innovative colors and dynamic styles. Daily fashion shows informed visitors about the latest trends.

B2B Match Making
The B2B Match Making at IFCO took place in speed dating mode and was well received. Exhibitors were efficiently networked with buyers from all over the world such as Inditex from Spain, Walmart, Quicksilver, Teddy Fresh or Wilbo from the USA, Sainsbury's from the UK, Cihuah from Mexico, the Apparel Group and Safari Group from the United Arab Emirates, Ria Miranda from Indonesia, Hi Style and Zalora from Malaysia, Musinsa from South Korea, Ackermans from South Africa etc.

IFCO February 2024
For the next date of IFCO (7.-10. February, 2024), the organizers expect more than 600 companies. The participation of international fashion companies is to be expanded, for which IFCO provides the ideal springboard into the European and Asian markets.

Source:

IFCO / JANDALI MODE.MEDIEN.MESSEN