From the Sector

Reset
38 results
DITF: Biopolymers from bacteria protect technical textiles Photo: DITF
Charging a doctor blade with molten PHA using a hot-melt gun
23.02.2024

DITF: Biopolymers from bacteria protect technical textiles

Textiles for technical applications often derive their special function via the application of coatings. This way, textiles become, for example wind and water proof or more resistant to abrasion. Usually, petroleum-based substances such as polyacrylates or polyurethanes are used. However, these consume exhaustible resources and the materials can end up in the environment if handled improperly. Therefore, the German Institutes of Textile and Fiber Research Denkendorf (DITF) are researching materials from renewable sources that are recyclable and do not pollute the environment after use. Polymers that can be produced from bacteria are here of particular interest.

Textiles for technical applications often derive their special function via the application of coatings. This way, textiles become, for example wind and water proof or more resistant to abrasion. Usually, petroleum-based substances such as polyacrylates or polyurethanes are used. However, these consume exhaustible resources and the materials can end up in the environment if handled improperly. Therefore, the German Institutes of Textile and Fiber Research Denkendorf (DITF) are researching materials from renewable sources that are recyclable and do not pollute the environment after use. Polymers that can be produced from bacteria are here of particular interest.

These biopolymers have the advantage that they can be produced in anything from small laboratory reactors to large production plants. The most promising biopolymers include polysaccharides, polyamides from amino acids and polyesters such as polylactic acid or polyhydroxyalkanoates (PHAs), all of which are derived from renewable raw materials. PHAs is an umbrella term for a group of biotechnologically produced polyesters. The main difference between these polyesters is the number of carbon atoms in the repeat unit. To date, they have mainly been investigated for medical applications. As PHAs products are increasingly available on the market, coatings made from PHAs may also be increasingly used in technical applications in the future.

The bacteria from which the PHAs are obtained grow with the help of carbohydrates, fats and an increased CO2 concentration and light with suitable wavelength.

The properties of PHA can be adapted by varying the structure of the repeat unit. This makes polyhydroxyalkanoates a particularly interesting class of compounds for technical textile coatings, which has hardly been investigated to date. Due to their water-repellent properties, which stem from their molecular structure, and their stable structure, polyhydroxyalkanoates have great potential for the production of water-repellent, mechanically resilient textiles, such as those in demand in the automotive sector and for outdoor clothing.

The DITF have already carried out successful research work in this area. Coatings on cotton yarns and fabrics made of cotton, polyamide and polyester showed smooth and quite good adhesion. The PHA types for the coating were both procured on the open market and produced by the research partner Fraunhofer IGB. It was shown that the molten polymer can be applied to cotton yarns by extrusion through a coating nozzle. The molten polymer was successfully coated onto fabric using a doctor blade. The length of the molecular side chain of the PHA plays an important role in the properties of the coated textile. Although PHAs with medium-length side chains are better suited to achieving low stiffness and a good textile handle, their wash resistance is low. PHAs with short side chains are suitable for achieving high wash and abrasion resistance, but the textile handle is somewhat stiffer.

The team is currently investigating how the properties of PHAs can be changed in order to achieve the desired resistance and textile properties in equal measure. There are also plans to formulate aqueous formulations for yarn and textile finishing. This will allow much thinner coatings to be applied to textiles than is possible with molten PHAs.

Other DITF research teams are investigating whether PHAs are also suitable for the production of fibers and nonwovens.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

DITF: Lignin coating for Geotextiles Photo: DITF
Coating process of a cellulose-based nonwoven with the lignin compound using thermoplastic processing methods on a continuous coating line.
27.10.2023

DITF: Lignin coating for Geotextiles

Textiles are a given in civil engineering: they stabilize water protection dams, prevent runoff containing pollutants from landfills, facilitate the revegetation of slopes at risk of erosion, and even make asphalt layers of roads thinner. Until now, textiles made of highly resistant synthetic fibers have been used for this purpose, which have a very long lifetime. For some applications, however, it would not only be sufficient but even desirable for the auxiliary textile to degrade in the soil when it has done its job. Environmentally friendly natural fibers, on the other hand, often decompose too quickly. The German Institutes of Textile and Fiber Research Denkendorf (DITF) are developing a bio-based protective coating that extends their service life.

Textiles are a given in civil engineering: they stabilize water protection dams, prevent runoff containing pollutants from landfills, facilitate the revegetation of slopes at risk of erosion, and even make asphalt layers of roads thinner. Until now, textiles made of highly resistant synthetic fibers have been used for this purpose, which have a very long lifetime. For some applications, however, it would not only be sufficient but even desirable for the auxiliary textile to degrade in the soil when it has done its job. Environmentally friendly natural fibers, on the other hand, often decompose too quickly. The German Institutes of Textile and Fiber Research Denkendorf (DITF) are developing a bio-based protective coating that extends their service life.

Depending on humidity and temperature, natural fiber materials can degrade in the soil in a matter of months or even a few days. In order to significantly extend the degradation time and make them suitable for geotextiles, the Denkendorf team researches a protective coating. This coating, based on lignin, is itself biodegradable and does not generate microplastics in the soil. Lignin is indeed biodegradable, but this degradation takes a very long time in nature.

Together with cellulose, Lignin forms the building materials for wood and is the "glue" in wood that holds this composite material together. In paper production, usually only the cellulose is used, so lignin is produced in large quantities as a waste material. So-called kraft lignin remains as a fusible material. Textile production can deal well with thermoplastic materials. All in all, this is a good prerequisite for taking a closer look at lignin as a protective coating for geotextiles.

Lignin is brittle by nature. Therefore, it is necessary to blend the kraft lignin with softer biomaterials. These new biopolymer compounds of brittle kraft lignin and softer biopolymers were applied to yarns and textile surfaces in the research project via adapted coating systems. For this purpose, for example, cotton yarns were coated with lignin at different application rates and evaluated. Biodegradation testing was carried out using soil burial tests both in a climatic chamber with temperature and humidity defined precisely according to the standard and outdoors under real environmental conditions. With positive results: the service life of textiles made of natural fibers can be extended by many factors with a lignin coating: The thicker the protective coating, the longer the protection lasts. In the outdoor tests, the lignin coating was still completely intact even after about 160 days of burial.

Textile materials coated with lignin enable sustainable applications. For example, they have an adjustable and sufficiently long service life for certain geotextile applications. In addition, they are still biodegradable and can replace previously used synthetic materials in some applications, such as revegetation of trench and stream banks.

Thus, lignin-coated textiles have the potential to significantly reduce the carbon footprint: They reduce dependence on petroleum-based products and avoid the formation of microplastics in the soil.

Further research is needed to establish lignin, which was previously a waste material, as a new valuable material in industrial manufacturing processes in the textile industry.

The research work was supported by the Baden-Württemberg Ministry of Food, Rural Areas and Consumer Protection as part of the Baden-Württemberg State Strategy for a Sustainable Bioeconomy.

Source:

Deutsche Institute für Textil- und Faserforschung Denkendorf (DITF)

Dyneema® SB301 to Enable Weight Savings of up to 20% in Protective Body Armor Image Avient
10.10.2023

Dyneema®: Weight Savings of up to 20% in Protective Body Armor

Dyneema® announced the launch of a next-generation unidirectional (UD) material innovation based on its third-generation fiber at the polymer level: a development poised to enhance the safety and mobility of law enforcement officers and military forces through molecular engineering.

This evolution enables a higher-tenacity fiber – resulting in increased ballistic stopping power when used in the new UD material, Dyneema® SB301, for protective armor applications. The seismic shift in performance enables body armor manufacturers to design soft armor vests 10–20% lighter than previous protective solutions.

Beyond strength, Dyneema® SB301 has the advantage of being made from bio-based Dyneema® fiber, which enables a carbon footprint up to 90% lower than generic high modulus polyethylene (HMPE) fiber.

Now available for use in law enforcement vests for the US market, Dyneema® SB301 material is manufactured in Greenville, North Carolina, in compliance with the Berry Amendment, with additional markets to follow.

Dyneema® announced the launch of a next-generation unidirectional (UD) material innovation based on its third-generation fiber at the polymer level: a development poised to enhance the safety and mobility of law enforcement officers and military forces through molecular engineering.

This evolution enables a higher-tenacity fiber – resulting in increased ballistic stopping power when used in the new UD material, Dyneema® SB301, for protective armor applications. The seismic shift in performance enables body armor manufacturers to design soft armor vests 10–20% lighter than previous protective solutions.

Beyond strength, Dyneema® SB301 has the advantage of being made from bio-based Dyneema® fiber, which enables a carbon footprint up to 90% lower than generic high modulus polyethylene (HMPE) fiber.

Now available for use in law enforcement vests for the US market, Dyneema® SB301 material is manufactured in Greenville, North Carolina, in compliance with the Berry Amendment, with additional markets to follow.

“In every situation, weight is now considered to be the top priority after ballistic stopping power,” said Marcelo van de Kamp, global business director for personal protection at Avient. “That’s because survivability is directly tied to weight savings when speed and agility determine outcomes. We’ve long been known as the ‘world’s strongest fiber™,’ but that won’t stop us from finding new opportunities to get stronger. This new product is the latest demonstration of our commitment to both innovation and protection.”

Source:

Avient Corporation

(c) Schoeller Textil AG
05.10.2023

Schoeller Textil presents FLEX SHIELD collection at A+A

Modern lifestyles require more than just functionality. Consumers are seeking products that offer a perfect balance between protection and comfort. The FLEX SHIELD collection offers a range of textiles that provide these functions without compromising on freedom of movement to maximize the wearer’s experience.

The Flex Shield Collection reflects Schoeller’s commitment to creating textiles that empower individuals to embrace their activities with confidence, knowing their gear will not fail and is designed for challenging conditions.

Every article in the collection is equipped with at least one of Schoeller’s pioneering textile technologies. These innovations ensure breathability, thermal regulation, as well as wind and water resistance.

Modern lifestyles require more than just functionality. Consumers are seeking products that offer a perfect balance between protection and comfort. The FLEX SHIELD collection offers a range of textiles that provide these functions without compromising on freedom of movement to maximize the wearer’s experience.

The Flex Shield Collection reflects Schoeller’s commitment to creating textiles that empower individuals to embrace their activities with confidence, knowing their gear will not fail and is designed for challenging conditions.

Every article in the collection is equipped with at least one of Schoeller’s pioneering textile technologies. These innovations ensure breathability, thermal regulation, as well as wind and water resistance.

One highlight is the schoeller®-ceraspaceTM technology, which owes its outstanding protective properties to a unique composition of special ceramic particles anchored in a polymer matrix. The ceramic particles are nearly as hard as diamonds and are firmly attached as a 3-dimensional coating to the textile. A textile with schoeller®-ceraspaceTM abrasion resistance performs significantly better than high-quality leather in terms of abrasion resistance. A fabric equipped with schoeller®-ceraspaceTM can also be more engineered to fulfill the required stretch properties, and its production process results in significantly less waste material compared to leather.

Source:

Schoeller Textil AG

Cinte Techtextil China 2023 with different zones (c) Messe Frankfurt (HK) Ltd
14.09.2023

Cinte Techtextil China 2023 with different zones

Technological progress often results from close collaboration, and industries that rely on continual improvement stand to benefit from the return to in-person business. Cinte Techtextil China’s first edition since eased pandemic measures is set to reflect a 27.9% increase in exhibitor numbers, with a rejuvenated international contingent further supplemented by the return of the European Zone. Taking place from 19 – 21 September across 40,000 sqm at the Shanghai New International Expo Centre, the platform is expected to welcome buyers from across Asia, Europe, and beyond. Pre-registrations have doubled compared to the previous edition, and international buyers account for over 20% of the total.

The new zone, Marine Textile Zone, will be comprised of multiple Chinese green marine and nautical rope netting exhibitors, while also hosting the Technology Exchange Forum, and the awards ceremony of the Top 10 Suppliers in the China Rope Net Industry. Prominent exhibitors in this zone include Ropenet Group, Hunan Xinhai, and Zhejiang Four Brothers Rope.

Technological progress often results from close collaboration, and industries that rely on continual improvement stand to benefit from the return to in-person business. Cinte Techtextil China’s first edition since eased pandemic measures is set to reflect a 27.9% increase in exhibitor numbers, with a rejuvenated international contingent further supplemented by the return of the European Zone. Taking place from 19 – 21 September across 40,000 sqm at the Shanghai New International Expo Centre, the platform is expected to welcome buyers from across Asia, Europe, and beyond. Pre-registrations have doubled compared to the previous edition, and international buyers account for over 20% of the total.

The new zone, Marine Textile Zone, will be comprised of multiple Chinese green marine and nautical rope netting exhibitors, while also hosting the Technology Exchange Forum, and the awards ceremony of the Top 10 Suppliers in the China Rope Net Industry. Prominent exhibitors in this zone include Ropenet Group, Hunan Xinhai, and Zhejiang Four Brothers Rope.

Other domestic exhibitors, such as Shanghai Shenda Kebao New Materials, SIJIA New Material (Shanghai), Zhejiang Hailide New Material, and Zhejiang Jinda New Materials, will showcase products for applications in outdoor advertising, tents, boats, vehicles, environmental engineering, and much more.

Supplementing the fairground’s wide variety of domestic suppliers will be a much-increased showing of international exhibitors, with many to be found within hall E1’s European Zone. Several global industry leaders are featured in their categories below:

Nonwovens equipment

  • Autefa Solutions, Germany: solutions provider for nonwovens lines and machines for carded-crosslapped needlepunching lines, spunlace lines and thermobonding lines.
  • Dilo, Germany: in addition to offering general services, Dilo supplies opening and blending equipment, carding and airlay machines, and crosslapping and needling machines.
  • Groz-Beckert, Germany: provider of industrial machine needles, precision parts and fine tools, as well as systems and services for the production and joining of textile fabrics.
  • Reifenhäuser Reicofil, Germany: provider of innovative technologies and components for plastics extrusion, producing blown films, cast films, sheets as well as nonwovens.

Weaving equipment

  • Itema, Italy: provider of advanced weaving machines, spare parts, and integrated services, specifically for rapier, air jet and projectile weft insertion technologies.
  • Lindauer DORNIER, Germany: the company manufactures weaving machines, film stretching lines, and composite systems, also offering technical support and spare parts supply.
  • Picanol, Belgium: producer and servicer of high-tech air jet and rapier weaving machines, with around 2,600 weaving mills utilising their systems worldwide.

Coating and lamination

  • BRÜCKNER Textile Technologies, Germany: manufacturer of machines and lines for the coating and finishing of apparel fabric, technical textiles, nonwovens, glass fabrics and floor coverings.
  • ROWA Lack, Germany: developer of high-quality materials and product solutions for the polymer industry, with applications including automotive, electrical engineering, construction, technical textiles, and medical technology.
  • Stahl, the Netherlands: the Dutch company provides high quality coatings, dyes and process chemicals for leather, flexible coated substrates, textiles, films and foils, paper, and related products.

Fibre

  • Monosuisse, Switzerland: with production sites in Switzerland, Poland, Romania, Mexico, and Germany, Monosuisse manufactures various precise, high-quality polymer monofilaments from 19µm to 3.00 mm in diameter.
  • Perlon, Germany: specialised in the manufacture of synthetic filaments in diverse application areas, including paper machine clothing, dental care, and advanced technical textiles for agriculture, 3D printing, sports and leisure, home, and more.

Meanwhile, first-time exhibitors include Rökona (Germany), showcasing RE:SPACE, their range of recycled technical textiles; Testex AG (Switzerland), the official OEKO-TEX® representative in multiple countries including China; Hohenstein (Germany), the renowned testing laboratory and research institute; and zwissTEX (Germany), the knitted fabrics and lamination specialists. In addition, the returning Taiwan Pavilion is set to feature the debut of Shinih Enterprise Co Ltd (Taiwan China).

Beyond the innovation displayed at the booths, the fair’s programme is set to welcome global experts from various technical textile and nonwoven sub-sectors to offer specific insights and unveil innovations. Highlighted events include:

The 11th China International Nonwovens Conference
14 sessions cover topics such as the quality control of medical supplies; green development in technology and applications in the nonwovens industry; and the development and application of flashspun nonwovens in China.

Marine textiles and rope netting events
Events specific to this zone include the Top 10 Suppliers in the China Rope Net Industry; Conference on Textile Applications for Marine Engineering and Fisheries; and the China Nonwovens & Industrial Textiles Association (CNITA) Rope Net Branch Council Meeting

"Nonwovens, Creating a Better Life” Innovation Showcase
Product display area showcasing around 100 nonwovens products with applications in five areas: medical and health, quality of life, human habitat, sustainable development, and innovative design.

Advanced Technical Textiles Industry Chain Synergistic Innovation Development Forum
Includes presentations from multiple key players in the technical textile industry, including Mr Steven Liu, Commercial Manager of Polymer Additives Business of Sanitized (China) Ltd.

Source:

Messe Frankfurt (HK) Ltd

seat belts Photo Oerlikon Textile GmbH & Co. KG
07.09.2023

Oerlikon Polymer Processing Solutions at the Techtextil India 2023

At this year’s Techtextil India, the Polymer Processing Solutions Division of the Swiss Oerlikon group will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Between September 9 and 12, the discussions at Jio World Convention Centre (JWCC), Mumbai, will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

At this year’s Techtextil India, the Polymer Processing Solutions Division of the Swiss Oerlikon group will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Between September 9 and 12, the discussions at Jio World Convention Centre (JWCC), Mumbai, will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
The yarns used in airbags are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technol-ogies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants - without any loss of function in any climate and for the lifetime of the vehicle

Buckle up!
Seat belts have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments. “With our unique, patented Single Filament Layer Technology, we offer a sophisticated and simultaneously gentle high-tenacity (HT) yarn process for manufacturing these lifesavers and other applications made from industrial yarn”, explains André Wissenberg, Head of Marketing.

Road reinforcement using geotextiles
Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demand-ing tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC –  quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

Source:

Oerlikon Textile GmbH & Co. KG

Photo: OCSiAl
24.11.2022

OCSiAl: Graphene nanotubes expand textiles’ functionality

  • ESD protection in harsh environments:
  • Polymer-coated chemical-resistant fabrics and fireproof special textiles with expanded electrostatic discharge (ESD) safety function have been developed.
  • Graphene nanotubes used as an electrostatic dissipative material make it possible to add ESD protection without compromising resistance to aggressive environments.
  • Efficient working loadings starting from 0.06% are sufficient for stable anti-static properties fully compliant with safety standards and position graphene nanotubes far ahead of other conductive materials.

Protective clothing, upholstery, and industrial fabrics that experience harsh conditions require advanced performance. Depending on the final application, specialty textiles can be augmented with flame retardancy, durability, chemical protection, and other properties. Additionally, ESD protection is obligatory in the chemical, rescue, mining, oil & gas, automotive manufacturing, and many other industries that are subject to safety regulations.
 

  • ESD protection in harsh environments:
  • Polymer-coated chemical-resistant fabrics and fireproof special textiles with expanded electrostatic discharge (ESD) safety function have been developed.
  • Graphene nanotubes used as an electrostatic dissipative material make it possible to add ESD protection without compromising resistance to aggressive environments.
  • Efficient working loadings starting from 0.06% are sufficient for stable anti-static properties fully compliant with safety standards and position graphene nanotubes far ahead of other conductive materials.

Protective clothing, upholstery, and industrial fabrics that experience harsh conditions require advanced performance. Depending on the final application, specialty textiles can be augmented with flame retardancy, durability, chemical protection, and other properties. Additionally, ESD protection is obligatory in the chemical, rescue, mining, oil & gas, automotive manufacturing, and many other industries that are subject to safety regulations.
 
In applications where multifunctionality of textile is required, graphene nanotubes overcome the limitations of other conductive materials such as unstable anti-static properties; degradation of strength, or chemical or fire resistance; complicated manufacturing processes; dusty production; carbon contamination on the material’s surface; or limited color options. Recent developments show that graphene nanotubes provide ESD protection to textiles in full compliance with safety standards and without degrading the textile’s resistance to harsh environments, greatly enhancing the value of textiles.
 
One such example is textiles coated with fluoroelastomer (a polymer that is highly resistant to chemicals) augmented with graphene nanotubes from OCSiAl. Nanotubes provide the material with surface resistivity of 10^6–10^8 Ω/sq compliant with EN, ISO, and ATEX standards for personal protective equipment. This new technology opens the door for the fabric to be used in high-level protective suits, combining exceptional protection from chemicals with electrostatic discharge protection.
 
Another example is how graphene nanotube technology is being acknowledged as a replacement for metal yarns in fireproof and anti-static textiles, protecting against sparks, splashes of molten metal, high temperatures, and the risk of sudden electrostatic discharge. While metal yarns require a specific knitting process and storage conditions, incorporating nanotubes in a fabric does not require any changes in the manufacturing process as the water-based dispersion is introduced into the fabric at the fluoro-organic treatment stage. The fabric with OCSiAl’s graphene nanotubes has been proven to maintain the pre-set level of ESD protection (surface resistance of 10^7 Ω) after numerous washes.
 
Permanent and stable electrical conductivity, facilitated by graphene nanotubes, is not only a matter of safety but brings additional value in augmenting dust-repellent properties and touchscreen compatibility for comfort and time savings. At the same time, the ultralow nanotube concentrations result in maintained manufacturing processes and mechanical properties, and improve product aesthetics by making it possible to use a wide range of colors. Altogether, these benefits allow textile manufacturers to create next-generation special textiles with expanded functionality.

 

16.11.2022

AkzoNobel launches sustainable biocide-free range for boaters

Recreational boaters now have an easy way to be more sustainable following the introduction of a new biocide-free (B-Free) fouling control range from AkzoNobel’s Yacht Coatings business.

The first product to be launched from the new B-Free range is B-Free Explore. It features a specially-developed, unique silicone polymer technology which produces an exceptionally smooth and slick hull – helping to reduce drag.

Fouling is controlled by preventing microorganisms such as barnacles, slime and algae from forming strong bonds with the hull of the boat. Any that do adhere can be simply wiped away by hand or water jet.

“We’ve developed high-performance technology which allows boaters to maintain a clean, smooth hull,” explains Simon Parker, Director of AkzoNobel’s Marine and Protective Coatings business. “It’s based on proven technology and exemplifies the restless spirit of innovation which has been the cornerstone of our International brand for more than 140 years.”

Recreational boaters now have an easy way to be more sustainable following the introduction of a new biocide-free (B-Free) fouling control range from AkzoNobel’s Yacht Coatings business.

The first product to be launched from the new B-Free range is B-Free Explore. It features a specially-developed, unique silicone polymer technology which produces an exceptionally smooth and slick hull – helping to reduce drag.

Fouling is controlled by preventing microorganisms such as barnacles, slime and algae from forming strong bonds with the hull of the boat. Any that do adhere can be simply wiped away by hand or water jet.

“We’ve developed high-performance technology which allows boaters to maintain a clean, smooth hull,” explains Simon Parker, Director of AkzoNobel’s Marine and Protective Coatings business. “It’s based on proven technology and exemplifies the restless spirit of innovation which has been the cornerstone of our International brand for more than 140 years.”

Adds Jemma Lampkin, Global Commercial Director for AkzoNobel’s Yacht Coatings business: “Boaters are becoming more aware of the impact they can have on the environment, but they still require technologies that deliver high-performance fouling control. B-Free Explore provides a stand-out solution for both of these challenges.”

Specially crafted for the leisure boat market, B-Free Explore is the culmination of a five-year development program. It can be applied to new hulls or directly to existing antifouling, without the need for the removal of the previous antifouling coating. This makes it simple for boaters to upgrade from their traditional coatings to the new technology.

The new product is also better for the marine ecosystem. Being biocide-free, it provides a smooth surface for improved hull efficiencies, which can lead to a reduced carbon footprint.

Currently being introduced in Northern Europe, B-Free Explore will be rolled out across Germany, the Netherlands, Norway and Sweden in January 2023.

More information:
AkzoNobel Coatings Polymere
Source:

AkzoNobel

Photo: Indorama Ventures Limited
12.10.2022

Indorama Ventures: New plant for nylon yarn

  • Collaboration between Indorama Ventures and Toyobo to meet growing global demand for airbags
  • Newly completed plant in Thailand will supply high-performance nylon yarn to customers in the automotive safety sector

Indorama Ventures Public Company Limited (IVL) celebrated the completion of a plant to manufacture high-performance nylon yarn for automobile airbags. The new plant in Rayong, Thailand, was constructed by Toyobo Indorama Advanced Fibers Co., Ltd. (TIAF), a joint venture that Indorama Ventures established with Toyobo Co., Ltd in November 2020.

The plant, which has been built on the site of Indorama Polyester Industries PCL (IPI) in Rayong Province, will deliver 11,000 tons of high-performance yarn per year to meet global demand for airbags that is expected to grow by 3 percent to 4 percent annually as automakers equip vehicles with more airbags and emerging economies require cars to adopt more safety features. Test production is scheduled to start in October 2022 with the goal of starting commercial production in the middle of 2023.

  • Collaboration between Indorama Ventures and Toyobo to meet growing global demand for airbags
  • Newly completed plant in Thailand will supply high-performance nylon yarn to customers in the automotive safety sector

Indorama Ventures Public Company Limited (IVL) celebrated the completion of a plant to manufacture high-performance nylon yarn for automobile airbags. The new plant in Rayong, Thailand, was constructed by Toyobo Indorama Advanced Fibers Co., Ltd. (TIAF), a joint venture that Indorama Ventures established with Toyobo Co., Ltd in November 2020.

The plant, which has been built on the site of Indorama Polyester Industries PCL (IPI) in Rayong Province, will deliver 11,000 tons of high-performance yarn per year to meet global demand for airbags that is expected to grow by 3 percent to 4 percent annually as automakers equip vehicles with more airbags and emerging economies require cars to adopt more safety features. Test production is scheduled to start in October 2022 with the goal of starting commercial production in the middle of 2023.

In 2014, Indorama Ventures and Toyobo jointly acquired Germany’s PHP Fibers GmbH, a leading airbag yarn maker. Since then, both companies have strengthened their relationship with a focus to expand in the automotive safety sector. Mr Christopher Kenneally, based in Bangkok, leads IVL’s Fibers segment, which produces fibers and yarns across its Hygiene, Mobility and Lifestyle verticals. Mr Ashok Arora, with over 30 years of experience in fibers and polymer operations, will helm TIAF as CEO while maintaining his role as CTO with IVL Fibers.

Source:

Indorama Ventures Limited

22.06.2022

Avgol® wins Innovation Award at the RIGHT Hygiene conference

  • Biotransformation technology for nonwovens

Avgol® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

  • Biotransformation technology for nonwovens

Avgol® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

“By bringing the Biotransformation technology to the various potential markets in India, we hope to offer a real-world solution to waste management,” he said. “We particularly hope to address aspects of the creation of fugitive waste and remove this from the environment without causing additional, and potentially more dangerous, problems.”

Source:

Avgol

13.03.2022

JEC Group supports Composites Expert To launch E-learning Composites Academy

On March 10th, JEC Group and Composites Expert have signed a partnership agreement to promote E-learning Composites Academy, the first 4.0 training platform dedicated to manufacturing processes of composite materials.

This partnership will start with two first steps: an introduction webinar session on March 15th at 4pm CET, and two sessions of training during JEC World 2022, on Tuesday, May 3rd and Wednesday, May 4th, in Paris where Composites Expert will present the E-learning Composites Academy, a new pedagogical approach aimed at appropriating knowledge of polymer transformation specially developed by Composites Expert.

Tools have been designed to combine the theoretical part (E-Learning course platform) and the practical part (BOXs, software, process simulator, exercises through manipulation) to observe complex phenomena, with the aim of mastering and optimising transformation processes. The aim of this presentation is to introduce people to the learning method and the interactivity of the teaching aids used in industry and education.

On March 10th, JEC Group and Composites Expert have signed a partnership agreement to promote E-learning Composites Academy, the first 4.0 training platform dedicated to manufacturing processes of composite materials.

This partnership will start with two first steps: an introduction webinar session on March 15th at 4pm CET, and two sessions of training during JEC World 2022, on Tuesday, May 3rd and Wednesday, May 4th, in Paris where Composites Expert will present the E-learning Composites Academy, a new pedagogical approach aimed at appropriating knowledge of polymer transformation specially developed by Composites Expert.

Tools have been designed to combine the theoretical part (E-Learning course platform) and the practical part (BOXs, software, process simulator, exercises through manipulation) to observe complex phenomena, with the aim of mastering and optimising transformation processes. The aim of this presentation is to introduce people to the learning method and the interactivity of the teaching aids used in industry and education.

“One of JEC Group’s objectives is to develop access to education to help the composites industry to attract and train talented professionals. So, we are very proud to announce this partnership and to support Composites Expert initiatives, as joining common efforts and strategies will benefit to the overall industry”, stated Anne-Carole Barbarin, Content and Product development Director.

“The partnership with JEC Group is a major step towards the development of our training platform, while several manufacturers have already supported us, such as Arkema, Chomarat, Daher, Diatex, Pinette PEI, Porcher, Sopara, joining JEC World to officially launch our platform is an amazing opportunity.”, stated Jean-Pierre Cauchois, CEO Composites Expert.

These training sessions are targeting companies’ employees who would like to improve their expertise, to study professional reconversion, the companies who would like to know more or use composite materials, and universities and school for students to go from theory to practical exercises.

Source:

JEC Group

(c) Avgol
15.11.2021

Avgol at Hygienix™ 2021 with biotransformation technology in nonwovens

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

From their base at the tabletop event, Nick and the Avgol team will be discussing the global challenge of eliminating incineration, chemical treatment, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

“Following our recent success at Index 20, we will be sharing insight to our research and development strategy with Hygienix attendees, addressing the degradation performance of our products and the path forward for the industry in terms of the use of new bio-colorants, biosurfactants and new technologies. Of course, we will also be demonstrating our latest Forward Innovative Thinking (FITTM) range of hygiene materials too, including natureFITTM”, says Nick Carter.

natureFIT™ is the newest innovation in the Avgol™ technology platform, designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

Hygienix™ runs from 15 – 18 November 2021 at the Westin Kierland Resort in Scottsdale, Arizona, USA.

More information:
Avgol Hygienix™ 2021 nonwovens
Source:

Avgol / PHD Marketing Ltd

08.11.2021

Composites Evolution showcased prepregs and new thermoplastic unidirectional tapes

Composites Evolution exhibited at the Advanced Engineering 2021 show on 3rd - 4th November highlighting its range of prepreg and introducing a new thermoplastic tape manufacturing capability.

Composites Evolution is a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials. A flexible approach allows Composites Evolution to offer short lead times and low minimum order quantities, while decades of combined expertise ensure that in-depth technical support is on-hand when customers need it.

Showcased was a battery box from a high-performance luxury electric vehicle manufactured from Evopreg® PFC bio-based, fire-resistant prepreg, a rear wing from a Ginetta G56 GTA GT4 race car utilising Evopreg® ampliTex™ natural fibre prepreg, and parts fabricated from the company’s newly-launched Evopreg® PA thermoplastic tape range.

Composites Evolution exhibited at the Advanced Engineering 2021 show on 3rd - 4th November highlighting its range of prepreg and introducing a new thermoplastic tape manufacturing capability.

Composites Evolution is a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials. A flexible approach allows Composites Evolution to offer short lead times and low minimum order quantities, while decades of combined expertise ensure that in-depth technical support is on-hand when customers need it.

Showcased was a battery box from a high-performance luxury electric vehicle manufactured from Evopreg® PFC bio-based, fire-resistant prepreg, a rear wing from a Ginetta G56 GTA GT4 race car utilising Evopreg® ampliTex™ natural fibre prepreg, and parts fabricated from the company’s newly-launched Evopreg® PA thermoplastic tape range.

Composites Evolution has a family of specialist prepregs for various applications, including Evopreg® EPC epoxy component prepregs which are a range of pre-impregnated fabrics suitable for moulding into high-performance, lightweight, structural components; Evopreg® EPT epoxy tooling prepregs which have been designed to help composite tooling manufacturers improve the flexibility and efficiency of their tooling manufacturing processes; and Evopreg® PFC fire-retardant prepregs a 100% bio-derived alternative to phenolics for applications where fire performance is a critical requirement.

Evopreg® ampliTex™ combines Composite Evolution’s high-performance Evopreg® epoxy resin systems with Bcomp’s award-winning ampliTex™ flax reinforcements, to deliver a family of materials which offer outstanding performance for component applications.

Composites Evolution launched their new range of Evopreg® PA Thermoplastic Tapes at Advanced Engineering; these are manufactured from polyamide-6 (PA6) polymer with unidirectional carbon fibre and are suitable for automated tape laying, winding and compression moulding into high-performance, lightweight components.

Source:

Composites Evolution Ltd

(c) INDA, the Association of the Nonwoven Fabrics Industry
07.09.2021

INDA Announces the 2021 RISE® Innovation Award Finalists

  • Innovations in Protection, Efficiency and Engineered Fabrics

INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the prestigious RISE® Innovation Award during the 11th edition of the Research, Innovation & Science for Engineered Fabrics Conference, (RISE®) to be held virtually September 28-30, 2021.  The award recognizes novel innovations in the nonwovens industry that creatively use next-level science and engineering principles to solve material challenges and expand the usage of nonwovens and engineered fabrics. These three finalists will present their innovative material science solutions as they compete for the RISE® Innovation Award.

  • Innovations in Protection, Efficiency and Engineered Fabrics

INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the prestigious RISE® Innovation Award during the 11th edition of the Research, Innovation & Science for Engineered Fabrics Conference, (RISE®) to be held virtually September 28-30, 2021.  The award recognizes novel innovations in the nonwovens industry that creatively use next-level science and engineering principles to solve material challenges and expand the usage of nonwovens and engineered fabrics. These three finalists will present their innovative material science solutions as they compete for the RISE® Innovation Award.

Canopy Respirator
Canopy is an innovative respirator that is fully mechanical, non-electrostatic, with a filter designed for superior breathability while offering the wearer facial transparency. The breakthrough respirator features 5.5mm water column resistance at 85 liters (3 cubic feet) per minute, 2-way filtration, and a pleated filter that contains over 500 square centimeters of surface area. The patented Canopy respirator resists fluids, and eliminates fogging of eyeglasses.  

Evalith® 1000 Series
Johns Manville’s innovative Alpha Binder is a formaldehyde-free, high bio-carbon content, toxic-free binder formulation ideal for carpet mat applications. Alpha Binder eliminates monomer and polymer synthesis, uses a bio-degradable catalyst, and requires 70% less water in manufacturing. The resulting glass mats made of Alpha Binder are named “Evalith 1000” and reduces energy consumption during manufacturing by over 70% compared to alternative petroleum-based binders. Evalith 1000 was commercialized in North America in 2020.

Fiber Coated, Heat Sealable, Breathable, Hybrid Membrane, Fabric Protection
TiGUARD protective fabric is a construction of monolithic or hybrid imperious/moisture eliminating membranes with a surface covered with micro-fiber. This nonwoven product is a multi-layer all polyester fabric specifically for chemical and microbial protective fabrics, products, and garments. It is constructed of compatible heat seal-able materials which lend themselves to high-speed heat seal-able production and ultimately automated manufacture of garments without sewing. It is a combination of a densely flocked polyester fiber surface on polyester membrane supported by polyester scrim.
Virtual RISE™ conference attendees include technology scouts and product developers in the nonwoven/engineered fabrics industry seeking new developments to advance their businesses. These attendees will electronically vote for the recipient of the 2021 RISE® Innovation Award, on Wed. Sept. 29th. The winner will be announced Thurs., Sept. 30th.

The conference program will cover timely and relevant industry topics including: Material Science Developments for Sustainable Nonwovens; Increasing Circularity in Nonwovens; Market Intelligence & Economic Insights; Promising Innovations in Nonwovens; Process Innovations in Nonwovens; Material Innovations in Nonwovens;  the full program can be viewed on the link: https://www.riseconf.net/conference.php

More information:
INDA nonwovens
Source:

INDA, the Association of the Nonwoven Fabrics Industry

(c) Fibre Extrusion Technology
04.08.2021

New FET meltspinning system upgrade for NIRI

Fibre Extrusion Technology Ltd of Leeds, UK has installed a new meltspinning system to upgrade research facilities at NIRI, the Nonwovens Innovation & Research Institute Ltd UK, a global leader in nonwoven engineering and product development.

Established in 1998, FET is a leading supplier of laboratory and pilot meltspinning systems with installations in over 35 countries and has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats.
 
The installation comprises a FET-102 Series Laboratory Meltblown Spinning System and FET-103 Monofilament Meltspinning System. This advanced equipment enhances NIRI’s extensive pilot facilities and state-of-the-art analytical laboratory for fast tracking innovation. In particular, the FET meltblown system will be utilised for R&D, pilot projects, sampling and prototyping, proof of concept testing and for designing cost-effective, sustainable and innovative products.

Fibre Extrusion Technology Ltd of Leeds, UK has installed a new meltspinning system to upgrade research facilities at NIRI, the Nonwovens Innovation & Research Institute Ltd UK, a global leader in nonwoven engineering and product development.

Established in 1998, FET is a leading supplier of laboratory and pilot meltspinning systems with installations in over 35 countries and has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats.
 
The installation comprises a FET-102 Series Laboratory Meltblown Spinning System and FET-103 Monofilament Meltspinning System. This advanced equipment enhances NIRI’s extensive pilot facilities and state-of-the-art analytical laboratory for fast tracking innovation. In particular, the FET meltblown system will be utilised for R&D, pilot projects, sampling and prototyping, proof of concept testing and for designing cost-effective, sustainable and innovative products.

NIRI supports global manufacturing companies to identify new opportunities for meltblown nonwovens, develop their next generation of products and accelerate their commercialisation activities. NIRI’s new upgraded laboratory and pilot system from FET can process a wide range of polymer types, including chemically recycled polymers, bio-polymers and many difficult-to-process materials.

Source:

Project Marketing for Fibre Extrusion Technology

21.07.2021

Devan: Supporting elite sport with ‘cool comfort technology’ Moov&Cool.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

In Belgium, Devan has been involved in the Gold2Gold project carried out by Sport Vlaanderen. Gold2Gold is a unique collaboration between sports, government and the industry to prepare Belgian athletes to perform better in hot environments during world-level championships. Thermoregulating technology is increasingly becoming a key aspect of endurance performance for elite athletes. At that top level, small differences in body core temperature can make the difference between being on the podium or sometimes not even finishing the race.

Source:

Devan Chemicals NV / Marketing Solutions NV

16.06.2021

Closed-loop recycling pilot project for single-use facemasks

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

“Recognizing the challenge, we set out to explore how used facemasks could potentially be returned into the value chain of new facemask production”, says Dr. Peter Dziezok, Director R&D Open Innovation at P&G. “But creating a true circular solution from both a sustainable and an economically feasible perspective takes partners. Therefore, we teamed up with Fraunhofer CCPE and Fraunhofer UMSICHT’s expert scientists and SABIC’s Technology & Innovation specialists to investigate potential solutions.”

As part of the pilot, P&G collected used facemasks worn by employees or given to visitors at its manufacturing and research sites in Germany. Although those masks are always disposed of responsibly, there was no ideal route in place to recycle them efficiently. To help demonstrate a potential step change in this scenario, special collection bins were set up, and the collected used masks were sent to Fraunhofer for further processing in a dedicated research pyrolysis plant.

“A single-use medical product such as a face mask has high hygiene requirements, both in terms of disposal and production. Mechanical recycling, would have not done the job”, explains Dr. Alexander Hofmann, Head of Department Recycling Management at Fraunhofer UMSICHT. “In our solution, therefore, the masks were first automatically shredded and then thermochemically converted to pyrolysis oil. Pyrolysis breaks the plastic down into molecular fragments under pressure and heat, which will also destroy any residual pollutants or pathogens, such as the Coronavirus. In this way it is possible to produce feedstock for new plastics in virgin quality that can also meet the requirements for medical products”, adds Hofmann, who is also Head of Research Department “Advanced Recycling” at Fraunhofer CCPE.

The pyrolysis oil was then sent to SABIC to be used as feedstock for the production of new PP resin. The resins were produced using the widely recognized principle of mass balance to combine the alternative feedstock with fossil-based feedstock in the production process. Mass balance is considered a crucial bridge between today’s large scale linear economy and the more sustainable circular economy of the future, which today is operated on a smaller scale but is expected to grow quickly.

“The high-quality circular PP polymer obtained in this pilot clearly demonstrates that closed-loop recycling is achievable through active collaboration of players from across the value chain”, emphasizes Mark Vester, Global Circular Economy Leader at SABIC. “The circular material is part of our TRUCIRCLE™ portfolio, aimed at preventing valuable used plastic from becoming waste and at mitigating the depletion of fossil resources.”

Finally, to close the loop, the PP polymer was supplied to P&G, where it was processed into non-woven fibers material. “This pilot project has helped us to assess if the close loop approach could work for hygienic and medical grade plastics”, says Hansjörg Reick, P&G Senior Director Open Innovation. “Of course, further work is needed but the results so far have been very encouraging.”

The entire closed loop pilot project from facemask collection to production was developed and implemented within seven months. The transferability of advanced recycling to other feedstocks and chemical products is being further researched at Fraunhofer CCPE.

Source:

Fraunhofer

Oerlikon: Booth at ITMA Asia 2021 (c) Oerlikon
01.06.2021

Oerlikon with a hybrid trade show concept at ITMA Asia

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

At ITMA Asia 2021, Oerlikon will present the next generation of an automatic texturing solution with up to 25 % energy saving and up to 30 % higher production speed, easy maintenance and best yarn quality. The core of this machine, the socalled EvoCooler, will be shown as an exhibit in combination with digital solutions like AIM4DTY. In the field of high-precision flow control solutions components, the two new gear metering pumps developments for the production of aramid and spandex will be presented as well.

23.04.2021

Oerlikon: Creating a new growth platform

Oerlikon signs agreement to acquire INglass, a global leader in high precision polymer flow control equipment, to accelerate expansion strategy in polymer processing market

  • INglass and its HRSflow Division is a market leader spezialized in hot runner sytems
  • Technology is highly complementary to Oerlikon’s existing capabilities in polymer flow control and will expand Oerlikon’s market access
  • Acquisition accelerates Oerlikon’s strategy in diversifying its manmade fibers business to expand into the high-growth polymer processing solution market
  • Oerlikon renames ‘Manmade Fibers’ Division to ‘Polymer Processing Solutions’
  • Acquisition is expected to be completed in the second quarter of 2021

Oerlikon, a leading provider of surface engineering, polymer processing and additive manufacturing, announced today that it has signed an agreement to acquire Italy-headquartered INglass S.p.A. and its innovative hot runner systems technology operating under its market-leading HRSflow business.

Oerlikon signs agreement to acquire INglass, a global leader in high precision polymer flow control equipment, to accelerate expansion strategy in polymer processing market

  • INglass and its HRSflow Division is a market leader spezialized in hot runner sytems
  • Technology is highly complementary to Oerlikon’s existing capabilities in polymer flow control and will expand Oerlikon’s market access
  • Acquisition accelerates Oerlikon’s strategy in diversifying its manmade fibers business to expand into the high-growth polymer processing solution market
  • Oerlikon renames ‘Manmade Fibers’ Division to ‘Polymer Processing Solutions’
  • Acquisition is expected to be completed in the second quarter of 2021

Oerlikon, a leading provider of surface engineering, polymer processing and additive manufacturing, announced today that it has signed an agreement to acquire Italy-headquartered INglass S.p.A. and its innovative hot runner systems technology operating under its market-leading HRSflow business.

The strategic acquisition is a significant step in expanding Oerlikon’s current manmade fibers business into the larger polymer processing market. The acquisition accelerates and enhances existing organic initiatives to diversify and strengthen the company’s core high-precision polymer flow control capabilities, products and services. The completion of the transaction is subject to customary regulatory approvals and is expected by the second quarter of 2021.

To reflect Oerlikon’s expansion into a larger high-growth market, the Manmade Fibers Division will be renamed as Polymer Processing Solutions Division. This division will have two business units: Flow Control Solutions and Manmade Fibers Solutions. The busines unit Flow Control Solutions will combine the expertise of Oerlikon Barmag’s existing gear metering pumps business line and INglass’ HRSflow operations. The business unit Manmade Fibers Solutions will continue to focus on growing the existing chemical fiber machinery and plant engineering business, offering plant solutions for the production of polyester, polypropylene and polyamide.

“Our new Polymer Processing Solutions Division and the acquisition of INglass S.p.A. and its HRSflow business are critical components of Oerlikon Group’s growth strategy. We are accelerating our efforts to drive sustainable organic and inorganic growth in all of our businesses. The acquisition enables new synergy opportunities between both Oerlikon divisions in specific end markets such as automotive. With INglass and its HRSflow operations, we acquire leading suppliers in their markets with proven success of their technologies and services,” said Dr. Roland Fischer, CEO Oerlikon Group.

“We firmly believe that within the Oerlikon Group we can further exploit the potential of our hot runner systems technology and, when combined with the capabilities of Oerlikon Barmag gear metering pumps and their melt distribution engineering competence, will position our business as one of the leading precision flow control specialists for multiple applications in a global growth market”, said Antonio Bortuzzo, CEO of INglass S.p.A.

New business unit offers great growth potential

The Oerlikon Barmag competence brand already offers high precision flow control related components, including a large selection of gear metering pumps for textile and non-textile markets. These highly efficient pumps are used in silicone casting, dynamic mixing and oil spraying for the chemical, paint, polymer processing and automotive industries. This double-digit million CHF business, which has grown in recent years, will be merged with INglass’ HRSflow hot runner technologies under the new business unit Flow Control Solutions. HRSflow’s excellent market access to many OEMs in and outside the automotive industry brings significant growth opportunities.

INglass is a leader in automotive and expanding in other sectors

INglass S.p.A. is an internationally operating successful company established in 1987. Its product portfolio includes hot runners as well as engineering and consultancy services for the advanced development of polymer processing products. INglass’ HRSflow hot runner systems are applied in multiple industries from automotive, consumer goods and household appliances to packaging, waste management, construction and transportation.

INglass is headquartered in San Polo di Piave, Italy, near Venice. 2020 revenues of INglass were approximately CHF 135 million and the acquisition is expected to be immediately accretive to Oerlikon’s margins and cash flows. INglass has more than 1 000 employees and 55 sites worldwide, including production plants in Italy, China and the US. Among these sites are INglass’ newly renovated headquarters and production at its primary location in San Polo di Piave near Venice, Italy. The investment modernized the facilities with automated production, underlining the company’s commitment to sustainability and the environment. The other two modern production sites are in Zhejiang (Hangzhou Province) in China and Michigan (Grand Rapids) in the USA.

Following the integration with Oerlikon Barmag’s gear metering pumps business of about 200 employees in Remscheid, Germany, the new Flow Control Solutions business unit will have round about 1 200 employees.

"We see great potential for growth in our new Flow Control Solutions business unit,” said Georg Stausberg, Polymer Processing Solutions Division CEO and Member of the Executive Committee of the Oerlikon Group. “The businesses form the two core growth pillars and benefit from each other in global market development, in modern and digitized production, and in customer services. We also see potential synergies in R&D by combining existing know-how in the field of polymer processing. New technological solutions between hot runner systems and gear metering pumps are conceivable. We also anticipate collaborating more closely with the Oerlikon Surface Solutions Division, particularly in future mobility applications and functional polymer component solutions for the automotive industry. All in all, we will offer our customers innovative and attractive solutions in the field of polymer processing and high precision flow control components.”

Next steps for further diversification of the division product portfolio are already ongoing

Combining the divisions plant engineering and process know how with expertise on high precision flow control components technologies has a significant impact on product quality in nearly all applications, which opens up a platform for further organic and inorganic growth. "We are closely observing the megatrends in the markets and developing new business models to match. In the area of sustainability, covering topics such as circular economy, the recycling of materials using mechanical and chemical recycling solutions, as well as the handling of new, more environmentally friendly and biodegradable materials, we are on the verge of a breakthrough. We are ready to actively participate in these growth areas,” added Georg Stausberg.

“In realigning the Polymer Processing Solutions Division, Oerlikon will continue to apply our successful recipe of a lean organizational structure to efficiently manage the business. This means clear processes, short decision-making paths and competent teams in a diverse and multicultural organization in which everyone can contribute innovatively to create customer value,” said Georg Stausberg.

HeiQ/Nylstar: Launch of HeiQ Viroblock Permanent on Meryl® Skinlife Force (c) Nylstar
28.01.2021

HeiQ/Nylstar: Launch of HeiQ Viroblock Permanent on Meryl® Skinlife Force

A decade long collaboration between Swiss textile innovator HeiQ and Spanish premium synthetic fiber manufacturer Nylstar, has resulted in the innovation of a revolutionary new premium antiviral and antimicrobial textile with zero pollution sustainable benefits, Meryl® Skinlife Force powered by HeiQ Viroblock Permanent, winner of ISPO Textrends Award for the Best Product.

A decade long collaboration between Swiss textile innovator HeiQ and Spanish premium synthetic fiber manufacturer Nylstar, has resulted in the innovation of a revolutionary new premium antiviral and antimicrobial textile with zero pollution sustainable benefits, Meryl® Skinlife Force powered by HeiQ Viroblock Permanent, winner of ISPO Textrends Award for the Best Product.

The new technology is used exclusively on Meryl® Skinlife Force, an hi-tech fabric that combines the silver-ion active principle antimicrobial properties developed by HeiQ and Nylstar’s hydrogen-based technology which allows the creation of yarns with a very strong molecular cohesion structure. The Hydrogen molecular structure makes Meryl® Skinlife Force a high-performance fabric in terms of moisture management and breathability, offering a natural stretch without elastane as well as excellent durability thanks to its continuous and high tenacity filaments. The robust durability of HeiQ Viroblock Permanent is achieved thanks to the silver particles being added directly into the raw polymer of the yarn thereby keeping these properties active for the lifetime of garments. Fabric samples successfully demonstrated a very strong antimicrobial efficacy with over 99.99% reduction of both gram-positive and gram-negative bacteria after 100 washes. Antiviral test is underway.

Both HeiQ and Nylstar will be “exhibiting” at ISPO Munich Online from February 1st to 5th. Nylstar won the Textrends 2021 Award for the Best Product in the Base Layer Category.