From the Sector

Reset
1424 results
Julien Born Photo HeiQ Materials AG
Julien Born
16.02.2024

Julien Born new CEO of HeiQ AeoniQ Holding

HeiQ AeoniQ Holding, a subsidiary of HeiQ Group, is appointing Julien Born as its CEO, leveraging his extensive executive leadership and profound textile industry expertise cultivated in prestigious organizations such as DuPont, KOCH Industries, and The LYCRA Company, where he served as CEO since 2021. Julien Born will champion the growth of the cellulosic filament fiber HeiQ AeoniQ™.

The HeiQ AeoniQ™ technology is poised for commercial production at the inaugural manufacturing facility in Portugal by the close of 2025. The just concluded €5M acquisition of land and buildings, within a 2-year project total investment of €80M, marks a pivotal milestone for the 15,000m2 facility in Maia, Porto. Situated strategically in Portugal's textile hub and a mere 20 minutes from a major commercial port, this facility is poised to catalyze the scale-up phase of the business, going from pilot manufacture to mass production when it wants to compete at full-scale on cost and performance with fossil fuel-based fibers.

HeiQ AeoniQ Holding, a subsidiary of HeiQ Group, is appointing Julien Born as its CEO, leveraging his extensive executive leadership and profound textile industry expertise cultivated in prestigious organizations such as DuPont, KOCH Industries, and The LYCRA Company, where he served as CEO since 2021. Julien Born will champion the growth of the cellulosic filament fiber HeiQ AeoniQ™.

The HeiQ AeoniQ™ technology is poised for commercial production at the inaugural manufacturing facility in Portugal by the close of 2025. The just concluded €5M acquisition of land and buildings, within a 2-year project total investment of €80M, marks a pivotal milestone for the 15,000m2 facility in Maia, Porto. Situated strategically in Portugal's textile hub and a mere 20 minutes from a major commercial port, this facility is poised to catalyze the scale-up phase of the business, going from pilot manufacture to mass production when it wants to compete at full-scale on cost and performance with fossil fuel-based fibers.

HeiQ intends to consolidate the Group’s current and future activities in Portugal at the newly acquired site. This includes Shared Service Center functions as well as the Innovation Hub for the HeiQ Textile & Flooring business unit.

The recent addition of Julien Born to lead the charge follows the nomination of Robert van de Kerkhof to the HeiQ Board, a seasoned executive with extensive textile experience holding positions as CCO, CSO, Board member of Lenzing Plc, and Chairman of CIRFS, the European Man-Made Fibres Association. Robert will also serve as the Chairman of the HeiQ AeoniQ Holding Board.

HeiQ AeoniQ Holding, established as an independent subsidiary to attract new investors, value-chain partners, and brands, embarks on an ambitious multi-year scale-up strategy. This strategy involves integrating diverse sources of bio-derived feedstock and hyper-scaling cellulosic filament fiber production capacity over the next decade, targeting industries such as apparel, footwear, automotive, home textiles, and aeronautics.

Source:

HeiQ Materials AG

16.02.2024

Lenzing updated its climate targets

The Lenzing Group has updated its climate targets to align with the goals of the Paris Agreement to limit the human-induced global temperature increase to 1.5 degrees Celsius. The Science Based Targets Initiative (SBTi) has reviewed and confirmed this target improvement.

By 2030, Lenzing aims to reduce its direct emissions from the production of its fiber and pulp plants (scope 1) and its emissions from purchased energy (scope 2) by 42 percent and its indirect emissions along the value chain (scope 3) by 25 percent on the way to net zero, from 2021 baseline. This corresponds to an absolute reduction of 1,100,000 tons (instead of the previously targeted 700,000 tons).

The following targets were recognized and confirmed by the SBTi:

The Lenzing Group has updated its climate targets to align with the goals of the Paris Agreement to limit the human-induced global temperature increase to 1.5 degrees Celsius. The Science Based Targets Initiative (SBTi) has reviewed and confirmed this target improvement.

By 2030, Lenzing aims to reduce its direct emissions from the production of its fiber and pulp plants (scope 1) and its emissions from purchased energy (scope 2) by 42 percent and its indirect emissions along the value chain (scope 3) by 25 percent on the way to net zero, from 2021 baseline. This corresponds to an absolute reduction of 1,100,000 tons (instead of the previously targeted 700,000 tons).

The following targets were recognized and confirmed by the SBTi:

  1. Overall net-zero target: Lenzing AG commits to reach net-zero greenhouse gas emissions along the entire value chain by 2050.
  2. Near-term targets: Lenzing AG commits to reduce absolute scope 1 and scope 2 greenhouse gas emissions by 42 percent by 2030 from a base year 2021. Lenzing AG also commits to reduce absolute scope 3 greenhouse gas emissions from purchased goods and services, fuels and energy-related activities as well as upstream transport and distribution by 25 percent within the same timeframe.
  3. Long-term targets: Lenzing AG commits to reduce absolute scope 1 and scope 2 greenhouse gas emissions by 90 percent by 2050 from a base year 2021. Lenzing AG also commits to reduce absolute scope 3 greenhouse gas emissions by 90 percent within in the same timeframe.

These updated targets replace the old SBTi approved Lenzing Group’s climate target in 2019.

(c) Swiss Textile Machinery Swissmem
16.02.2024

Recycled fibres: Swiss manufacturers for circularity

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Spinning recycled cotton
The use of mechanically recycled fibres in spinning brings specific quality considerations: they have higher levels of short fibres and neps – and may often be colored, particularly if post-consumer material is used. It’s also true that recycled yarns have limitations in terms of fineness. The Uster Statistics 2023 edition features an extended range of fibre data, supporting sustainability goals, including benchmarks for blends of virgin and recycled cotton.
In general, short fibres such as those in recycled material can easily be handled by rotor spinning machines. For ring spinning, the shorter the fibres, the more difficult it is to guide them through the drafting zone to integrate them into the yarn body. Still, for wider yarn counts and higher yarn quality, the focus is now shifting to ring spinning. The presence of short fibres is a challenge, but Rieter offers solutions to address this issue.

Knitting recycled wool
For recycling, wool fibres undergo mechanical procedures such as shredding, cutting, and re-spinning, influencing the quality and characteristics of the resulting yarn. These operations remove the natural scales and variations in fibre length of the wool, causing a decrease in the overall strength and durability of the recycled yarn. This makes the yarn more prone to breakage, especially under the tension exerted during knitting.

Adapting to process recycled materials often requires adjustments to existing machinery. Knitting machines must be equipped with positive yarn suppliers to control fibre tension. Steiger engages in continuous testing of new yarns on the market, to check their suitability for processing on knitting machines. For satisfactory quality, the challenges intensify, with natural yarns requiring careful consideration and adaptation in the knitting processes.

From fibres to nonwovens
Nonwovens technology was born partly from the idea of recycling to reduce manufacturing costs and to process textile waste and previously unusable materials into fabric structures. Nonwovens production lines, where fibre webs are bonded mechanically, thermally or chemically, can easily process almost all mechanically and chemically recycled fibres.

Autefa Solutions offers nonwovens lines from a single source, enabling products such as liners, wipes, wadding and insulation to be produced in a true closed loop. Fibres are often used up to four times for one product.

Recycling: total strategy
Great services, technology and machines from members of Swiss Textile Machinery support the efforts of the circular economy to process recycled fibres. The machines incorporate the know-how of several decades, with the innovative power and quality standards in production and materials.
Stäubli’s global ESG (environmental, social & governance) strategy defines KPIs in the context of energy consumption, machine longevity and the recycling capacity in production units worldwide, as well in terms of machinery recyclability. The machine recyclability of automatic drawing in machines, weaving systems and jacquard machines ranges from 96 to 99%.

Source:

Swiss Textile Machinery Swissmem

silk Bild: LoggaWiggler, Pixabay
15.02.2024

Haelixa and Trudel Silk: New Partnership

Haelixa, the trailblazer of physical traceability solutions, has partnered with Trudel Silk, a market leader for sustainable organic and recycled silk products. This collaboration brings traceability and transparency to silk production.

Silk is one of the finest and smoothest fabrics; the better the quality of the silk, the more luxurious it feels to the touch. To create the best quality silk, the conditions for mulberry cultivation must be up to the highest standards. A healthy micro-ecosystem in the fields translates to top-grade silk cocoon quality. At Trudel, this is the environment they have created for the vertical integration of their business. Trudel aims to succeed at every stage of the process, which can only be accomplished through the active involvement and visible cooperation of all market players. These players include farmers, reeling mills, twisting/spinning mills, weaving mills, dyeing and printing mills, and brands. They are involved in every step, from the cultivation of mulberry trees to the production of silk fabrics.

Haelixa, the trailblazer of physical traceability solutions, has partnered with Trudel Silk, a market leader for sustainable organic and recycled silk products. This collaboration brings traceability and transparency to silk production.

Silk is one of the finest and smoothest fabrics; the better the quality of the silk, the more luxurious it feels to the touch. To create the best quality silk, the conditions for mulberry cultivation must be up to the highest standards. A healthy micro-ecosystem in the fields translates to top-grade silk cocoon quality. At Trudel, this is the environment they have created for the vertical integration of their business. Trudel aims to succeed at every stage of the process, which can only be accomplished through the active involvement and visible cooperation of all market players. These players include farmers, reeling mills, twisting/spinning mills, weaving mills, dyeing and printing mills, and brands. They are involved in every step, from the cultivation of mulberry trees to the production of silk fabrics.

Haelixa and Trudel have collaborated to improve silk’s robust and consistent traceability. As the demand for validation of the silk value chain increases, they have partnered with groups from Italy and Asia to develop a unique solution that uses DNA markers to trace the entire supply chain of silk production. This innovative approach ensures each silk product’s ethical sourcing.

The silk fibers used in their spun silk yarns are marked with a specific DNA per farm set selected by Trudel. Throughout the supply chain, samples of yarn, fabrics, and finished products undergo testing to verify the presence of original silk fibers. Based on the reporting, the brand can trace the finished accessories or garments to Trudel.

 

More information:
Haelixa Silk Road DNA marker
Source:

Haelixa

Das Mehrweg-Glossar ist zweisprachig (Deutsch und Englisch) und kostenlos erhältlich. © Adobe Stock PX Media/Composing Fraunhofer IML
Das Mehrweg-Glossar ist zweisprachig (Deutsch und Englisch) und kostenlos erhältlich.
14.02.2024

Klarheit im Begriffs-Dschungel der Circular Economy

Wie unterscheiden sich Wiederverwendung und Recycling? Wie ist der deutsche Begriff Mehrweg zu verwenden, wie grenzt er sich von Einweg ab? Für welche Bewertung sind Wiedereinsatzquoten sinnvoller als Recyclingquoten? Antworten auf diese nicht zuletzt durch die PPWR (Packaging & Packaging Waste Regulation der EU) aufgeworfenen Fragen und kurze Erläuterungen zu Begrifflichkeiten der Kreislaufführung von Verpackungen liefert das neue auf Deutsch und Englisch erschienene »Mehrweg-Glossar/Glossary on Reuse«. Das Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT und das Fraunhofer-Institut für Materialfluss und Logistik IML erstellten dies im Auftrag der Stiftung Initiative Mehrweg, um Klarheit in die oft nicht trennscharfen Begrifflichkeiten rund um Wiederverwendung und die Circular Economy zu bringen.

Wie unterscheiden sich Wiederverwendung und Recycling? Wie ist der deutsche Begriff Mehrweg zu verwenden, wie grenzt er sich von Einweg ab? Für welche Bewertung sind Wiedereinsatzquoten sinnvoller als Recyclingquoten? Antworten auf diese nicht zuletzt durch die PPWR (Packaging & Packaging Waste Regulation der EU) aufgeworfenen Fragen und kurze Erläuterungen zu Begrifflichkeiten der Kreislaufführung von Verpackungen liefert das neue auf Deutsch und Englisch erschienene »Mehrweg-Glossar/Glossary on Reuse«. Das Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT und das Fraunhofer-Institut für Materialfluss und Logistik IML erstellten dies im Auftrag der Stiftung Initiative Mehrweg, um Klarheit in die oft nicht trennscharfen Begrifflichkeiten rund um Wiederverwendung und die Circular Economy zu bringen.

Das rund 40 Seiten umfassende, zweisprachige Glossar hat das Ziel, Beschreibungen und Vergleiche im Bereich der wiederverwendbaren und rezyklierbaren Verpackungssysteme zu schärfen. Das Werk soll als Arbeitshilfe dienen, um die Kommunikation zwischen Wissenschaft, Politik, Unternehmen und Verbraucher*innen zu erleichtern. Begrifflichkeiten wie Recycling, Reutilization, Einweg, Mehrweg oder Recyclingquoten sind omnipräsent, jedoch nicht immer trennscharf definiert. Beispielsweise werden Wiederverwendung und Recycling manchmal als konkurrierende Verfahren angesehen, manchmal fungiert Recycling als Oberbegriff, manchmal Wiederverwendung. »In diesem Glossar betrachten wir die Wiederverwendung als zerstörungsfreie Kreislaufführung, d.h. das Objekt und seine Form bleiben erhalten, während das Recycling einen zerstörenden Aufbereitungsprozess beschreibt, bei dem es vor allem um den Stofferhalt geht«, gibt Jürgen Bertling von Fraunhofer UMSICHT und Mitautor des Glossars einen Einblick.

Das Glossar ist in vier Kapitel unterteilt: Zunächst erläutert das Autorenteam relevante Aspekte für den Vergleich von Verpackungssystemen, das nächste Kapitel enthält Übersichtsgrafiken zu Verpackungstypen in Abhängigkeit ihrer Kreislauffähigkeit und eine schematische Darstellung verbundener Kreisläufe. Die Definitionen aller relevanten Begrifflichkeiten wie z. B. Wiederverwendung und Weiterverwendung sowie eine Abgrenzung und Einordnung der im Deutschen verwendeten Begrifflichkeiten Einweg und Mehrweg finden sich im dritten Kapitel. Das Glossar schließt mit einem Kapitel zu Formeln und Formelzeichen für Berechnungen, die zu einer möglichst allgemeinverständlichen Schreibweise in wissenschaftlich-technischen Analysen beitragen sollen.

Das Glossar ist frei zugänglich und kann unter diesem Link heruntergeladen werden.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT
Fraunhofer-Institut für Materialfluss und Logistik IML

INDA: Sustainability as Top Priority for 2024 (c) INDA
14.02.2024

INDA: Sustainability as Top Priority for 2024

INDA announces Sustainability as a primary focus for 2024. This strategic initiative, backed by resounding support from INDA’s leadership, is a direct response to feedback from association members affirming that sustainability remains one of the nonwovens industry’s highest priorities.

INDA’s sustainability endeavor will center around three core pillars crucial to the industry’s future: Responsible Sourcing, End-of-Life Solutions, and Innovations in Sustainability. This multifaceted initiative will introduce a spectrum of new and enhanced offerings, including:

  • Webinars addressing sustainability issues impacting members and the industry.
  • Specialized technical and government affairs committees enabling members to collaborate on sustainability opportunities and challenges.
  • The inaugural release of a comprehensive sustainability report from INDA’s Market Intelligence department.
  • A dedicated sustainability special edition of the International Fiber Journal, produced by INDA Media.
  • Sustainability programming at INDA events, including a dedicated focus at the IDEA® 2025 conference.

INDA announces Sustainability as a primary focus for 2024. This strategic initiative, backed by resounding support from INDA’s leadership, is a direct response to feedback from association members affirming that sustainability remains one of the nonwovens industry’s highest priorities.

INDA’s sustainability endeavor will center around three core pillars crucial to the industry’s future: Responsible Sourcing, End-of-Life Solutions, and Innovations in Sustainability. This multifaceted initiative will introduce a spectrum of new and enhanced offerings, including:

  • Webinars addressing sustainability issues impacting members and the industry.
  • Specialized technical and government affairs committees enabling members to collaborate on sustainability opportunities and challenges.
  • The inaugural release of a comprehensive sustainability report from INDA’s Market Intelligence department.
  • A dedicated sustainability special edition of the International Fiber Journal, produced by INDA Media.
  • Sustainability programming at INDA events, including a dedicated focus at the IDEA® 2025 conference.
Source:

INDA - Association of the Nonwoven Fabrics Industry

Archroma launches Super Systems+ Photo: Archroma
14.02.2024

Archroma launches Super Systems+

Archroma introduced Super Systems+. These end-to-end systems combine fiber-specific processing solutions and intelligent effects to help textile and apparel brands, retailers and mills positively impact their economic and environmental sustainability.

Archroma’s Super Systems+ suite encompass wet processing solutions that deliver measurable environmental impact; durable colors and functional effects that add value and longevity to the end product; and technologies that eliminate harmful or regulated substances. It will allow brands and mills to achieve their desired level of sustainability through measurable resource savings and cleaner chemistries.

Archroma introduced Super Systems+. These end-to-end systems combine fiber-specific processing solutions and intelligent effects to help textile and apparel brands, retailers and mills positively impact their economic and environmental sustainability.

Archroma’s Super Systems+ suite encompass wet processing solutions that deliver measurable environmental impact; durable colors and functional effects that add value and longevity to the end product; and technologies that eliminate harmful or regulated substances. It will allow brands and mills to achieve their desired level of sustainability through measurable resource savings and cleaner chemistries.

Products and technologies that are be used in Super Systems+ solutions include: AVITERA® SE for resource savings, an improved cost-to-performance ratio for cotton and its blends and chlorine fastness; DIRESUL® EVOLUTION BLACK for shade and wash-down effects on black denim and an overall impact reduction of 57%*; aniline-free** DENISOL® PURE INDIGO 30 LIQ for authentic blue denim; ERIOPON® E3-SAVE all-in-one auxiliary for resource-intensive polyester dyeing that reduces processing time and conserves water and energy; and PHOBOTEX® NTR-50 LIQ for bio-based, PFAS-free, formaldehyde-free and crosslinker-free durable water repellence.

*As determined by Ecoterrae, a leading Spain-based sustainability consulting firm, through a Life Cycle Analysis (UNE-EN ISO 14044:2006) at the synthesis stage, using the ReCiPe 2016 Impact calculation methodology.
**Below limits of detection according to industry standard test methods.

Source:

Archroma

(c) Oerlikon Textile GmbH & Co. KG
13.02.2024

Oerlikon Barmag: Chemiefaseranlage für nachhaltige Polyestergarn-Produktion in Indien

Mit der Inbetriebnahme der neuen Polyestergarn-Produktion bei Garden Silk Mills in Surat, Indien, zeigt das zur Schweizer Oerlikon Industriegruppe gehörende Unternehmen Oerlikon Barmag seine Kompetenz als einer der führenden Anbieter von Chemiefaseranlagen. Der Um- und Neubau der Polyesterspinnerei mit 216 WINGS FDY Spinnstellen ging einher mit einer umfangreichen Engineering-Leistung, die im engen Zusammenspiel der Experten aus Deutschland und aus Indien erbracht wurden.

Mit der Inbetriebnahme der neuen Polyestergarn-Produktion bei Garden Silk Mills in Surat, Indien, zeigt das zur Schweizer Oerlikon Industriegruppe gehörende Unternehmen Oerlikon Barmag seine Kompetenz als einer der führenden Anbieter von Chemiefaseranlagen. Der Um- und Neubau der Polyesterspinnerei mit 216 WINGS FDY Spinnstellen ging einher mit einer umfangreichen Engineering-Leistung, die im engen Zusammenspiel der Experten aus Deutschland und aus Indien erbracht wurden.

Das Expansionsprojekt für FDY-Garne bei Garden Silk Mills Private Limited (GSMPL) markiert den Beginn einer Periode schnellen Fortschritts im Textilsektor durch die Chatterjee Group (TCG) unter der Führung ihres Vorsitzenden Dr. Purnendu Chatterjee. Mit ihrer modernen Produktionsanlage in Jolwa, in der hochwertige Polyesterchips, POY, FDY und andere Spezialgarne hergestellt werden, und der Marke Garden Vareli, die eine zeitgemäße Kollektion von Saris und Kleidungsstoffen anbietet, schafft die Chatterjee Group, die weltweit Investitionen in Höhe von 8 Milliarden US-Dollar tätigt, den ,Garten von morgen‘. „Wir bei MCPI und GSMPL sind entschlossen, die textile Vision von Dr. Purnendu Chatterjee, dem Vorsitzenden von TCG, zu verwirklichen", sagte D.P. Patra, Whole Time Director und CEO von MCPI.

Oerlikon Barmag Anlagen beherrschen nahezu alle Prozesse zur Herstellung textiler und technischer Garne und verspinnen die gängigen Polymere Polyester, Polyamid 6 und 6.6 oder Polypropylen. Bei Garden Silk Mills geht es um vollverstreckte Garne (FDY). Sie werden ohne weitere Veredelung zu textilen Flächen verarbeitet. Überall dort, wo Textilien glatt fallen oder aber gleiten soll, kommen vollverstreckte Garne zum Einsatz.

Das WINGS Konzept durchbricht dabei die Grenzen konventioneller FDY Spinnanlagen. WINGS steht für optimierte Produktionsprozesse, geringe Abfallraten und um rund 30 Prozent reduzierten Energieverbrauch. Hohe Garnqualität ist dabei verpflichtend. Einsetzbar ist diese Technologie im FDY Prozess für Polyester und Polyamid.

Oerlikon Barmag WINGS Technologie unterstützt Garden Silk Mills bei der Produktion von FDY Premiumgarnen – leistungsstarke Spinnereikomponenten wie Spinnpumpen, Spinnbalken und Düsenpakete bis zur Crossflow-Anblasung und den 216 WINGS Wicklern wurden im Direktspinnverfahren im Anschluss an eine bei Garden Silk Mills vorhandene Polykondensationsanlage installiert.

Source:

Oerlikon Textile GmbH & Co. KG

NRW.Energy4Climate veröffentlicht Diskussionspapier. © Warchi-iStock.com
NRW.Energy4Climate veröffentlicht Diskussionspapier.
13.02.2024

Klimaneutrale Industrie braucht schnelle Genehmigungsverfahren

Für die Transformation der Industrie hin zur Klimaneutralität sind zügige Genehmigungsverfahren eine zentrale Rahmenbedingung. Denn sie bestimmen darüber, ob notwendige Maßnahmen schnell umgesetzt werden können. Mit dem nun veröffentlichten Diskussionspapier legt die unter dem Dach der Landesgesellschaft NRW.Energy4Climate arbeitende Initiative IN4climate.NRW konkrete Vorschläge zur Weiterentwicklung des Rechtsrahmens vor.

EnWG, UVPG, BImSchG, BauGB: Diese Kürzel stehen für Bundesgesetze, die erheblichen Einfluss auf die Dauer von Genehmigungsverfahren nehmen können. Um die Industrie beim klimaneutralen Umbau bestmöglich zu unterstützen, ist es notwendig, diesen bestehenden Rechtsrahmen weiterzuentwickeln. Hier setzt das Diskussionspapier »Vorschläge zur Beschleunigung von Genehmigungsverfahren für die Transformation der Industrie zur Klimaverträglichkeit« an. In fünf Themenfeldern formuliert das Papier Vorschläge zur Änderung des Bundesrechts. Ausgangspunkt sind dabei Praxiserfahrungen der energieintensiven Grundstoffindustrie und der zugehörigen Infrastruktursektoren.

Für die Transformation der Industrie hin zur Klimaneutralität sind zügige Genehmigungsverfahren eine zentrale Rahmenbedingung. Denn sie bestimmen darüber, ob notwendige Maßnahmen schnell umgesetzt werden können. Mit dem nun veröffentlichten Diskussionspapier legt die unter dem Dach der Landesgesellschaft NRW.Energy4Climate arbeitende Initiative IN4climate.NRW konkrete Vorschläge zur Weiterentwicklung des Rechtsrahmens vor.

EnWG, UVPG, BImSchG, BauGB: Diese Kürzel stehen für Bundesgesetze, die erheblichen Einfluss auf die Dauer von Genehmigungsverfahren nehmen können. Um die Industrie beim klimaneutralen Umbau bestmöglich zu unterstützen, ist es notwendig, diesen bestehenden Rechtsrahmen weiterzuentwickeln. Hier setzt das Diskussionspapier »Vorschläge zur Beschleunigung von Genehmigungsverfahren für die Transformation der Industrie zur Klimaverträglichkeit« an. In fünf Themenfeldern formuliert das Papier Vorschläge zur Änderung des Bundesrechts. Ausgangspunkt sind dabei Praxiserfahrungen der energieintensiven Grundstoffindustrie und der zugehörigen Infrastruktursektoren.

Samir Khayat, Geschäftsführer von NRW.Energy4Climate: »In unserer Initiative IN4climate.NRW bringen wir Wissenschaft, Politik und Wirtschaft an einen Tisch und erarbeiten Lösungsansätze, um den klimaneutralen Umbau der Industrie in der Praxis umzusetzen. Schnelle Genehmigungsverfahren sind hierbei von ganz zentraler Bedeutung. In dem Diskussionspapier machen wir konkrete Vorschläge, die echtes Beschleunigungspotenzial haben. Denn notwendige Umbaumaßen müssen, unter Wahrung der rechtlichen Vorgaben, zeitnah und zielgerichtet umgesetzt werden können.«

Den Diskussionsbeitrag hat IN4climate.NRW gemeinsam mit Partnerunternehmen in der Arbeitsgruppe »Genehmigungsverfahren« erarbeitet. Hierzu gehören Heidelberg Materials, thyssenkrupp Steel, Open Grid Europe und das Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT.

Bundeseinheitliche Beschleunigung von Fachverfahren
Prof. Dr.-Ing. Ulrich Seifert vom Fraunhofer UMSICHT und einer der Autoren: »Die grundsätzliche Passfähigkeit der Vorschläge in den bestehenden Rechtsrahmen und plausibel darstellbare Bezüge zu übergeordneten, rechtsverbindlichen Zielen des Klimaschutzes waren die Leitmerkmale, um aus den beigesteuerten Hinweisen und Empfehlungen der Industriepartner eine Auswahl treffen und ausformulieren zu können. Die Vorschläge konzentrieren sich auf mögliche Änderungen des Bundesrechts, da in erster Linie eine bundeseinheitliche Beschleunigung von Fachverfahren angestrebt werden sollte, die allen Betroffenen in der Praxis zugutekommt. Sie folgen dem erkannten Bedarf, Transformationsvorhaben in der Breite den Weg zu ebnen und dabei auch notwendige Infrastrukturen einzubeziehen.«

Einige der in dem Papier enthaltenen Vorschläge sind bereits Gegenstand laufender Prozesse zur Gesetzesnovellierung, zu welchen das Papier durch die Einbettung in Praxiserfahrungen einen ergänzenden Beitrag leisten möchte. Die Vorschläge sind in die Themenfelder Energiewirtschaftsgesetz (EnWG), Gesetz über die Umweltverträglichkeitsprüfung (UVPG), Bundes-Immissionsschutzgesetz (BImSchG), Baugesetzbuch (BauGB) und Übergreifendes untergliedert. Jedem Änderungsvorschlag wird eine kurze Beschreibung der rechtlichen Situation vorangestellt, die die Problematik mit dem Blick auf zügige Genehmigungsverfahren veranschaulicht. Dem einzelnen Änderungsvorschlag folgt die juristische Begründung.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

 

Testfahrt im Erzgebirge (c) silbaerg GmbH
09.02.2024

Grünes Snowboard mit JEC Innovation Award ausgezeichnet

Naturfasern und Rezyklate sind die Grundlage der neuesten Produktlinie von silbaerg Snowboards. silbaerg fertigt seit 2011 hochwertige Snowboards mittels patentierter A.L.D.-tech®. A.L.D. steht für anisotropic layer design und ermöglicht eine bisher ungesehene Anpassungsfähigkeit an verschiedene Fahrsituationen.  

Handgefertigte A.L.D.tech®-Lagen umgeben den Holzkern und nicht, wie bei anderen Anbietern üblich, klassische industriell gefertigte Bi-, Tri- oder Quadraxialgelege. Bereits 2015 wurden dabei erstmals Naturfasern in Form von Tapes verwendet.

Naturfasern und Rezyklate sind die Grundlage der neuesten Produktlinie von silbaerg Snowboards. silbaerg fertigt seit 2011 hochwertige Snowboards mittels patentierter A.L.D.-tech®. A.L.D. steht für anisotropic layer design und ermöglicht eine bisher ungesehene Anpassungsfähigkeit an verschiedene Fahrsituationen.  

Handgefertigte A.L.D.tech®-Lagen umgeben den Holzkern und nicht, wie bei anderen Anbietern üblich, klassische industriell gefertigte Bi-, Tri- oder Quadraxialgelege. Bereits 2015 wurden dabei erstmals Naturfasern in Form von Tapes verwendet.

silbaerg setzt auf den Einsatz regionaler Produkte. So kommen Hanffasertapes von Sachsenleinen GmbH (Markkleeberg, Sachsen) zum Einsatz, deren Rohstoff seinen Ursprung auf den Feldern zwischen Chemnitz und Leipzig hat. Für die Versteifung der Boards werden weiterhin Carbonfasertapes benötigt. Hier greift silbaerg auf Forschungsergebnisse des Sächsischen Textilforschungsinstitutes e. V. (STFI) in Chemnitz zurück: Carbonfaserabfälle von silbaerg werden in Form von Recyclingvliesstoffen wiedereingesetzt. Die Verschnittreste, die bei silbaerg in der Produktion anderer Boards anfallen, werden am STFI auf der Anlagentechnik des Zentrums für Textilen Leichtbau aufbereitet und zu Carbonfaservliesstoffen verarbeitet. Diese werden anschließend zu Carbonfasertapes konfektioniert und dienen zusammen mit Hanffasertapes als Verstärkungsstruktur im grünen Snowboard, die damit absolut made in Saxony sind.

Aktuell werden erste Boards von silbaerg-Teamfahrern im Schnee getestet. Diese Testboards nutzen ein neues biobasiertes Harzsystem der bto-epoxy GmbH (Amstetten, Österreich), welches einen Bio-Anteil von 31 % im Harz und 54 % im Härter aufweist. Es ist geplant, die neue Produktlinie noch im Jahr 2024 auf den Markt zu bringen.  

Durch den Einsatz von Hanffasern und recycelten Carbonfasern und die damit verbundene Substitution von Primärmaterial werden Ziele für eine nachhaltige Entwicklung erfüllt. Durch die Nutzung von hauseigenen Rezyklaten lässt sich zudem die Abfallmenge von Carbonfasern im Unternehmen um ca. 75 % reduzieren. Welchen Einfluss dies auf die LCA der Produkte hat, wird aktuell berechnet. 

Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

07.02.2024

RadiciGroup’s roadmap to a sustainable future

“From Earth to Earth”: The new plan defines goals and concrete actions in Environmental, Social and Governance (ESG) areas to foster value creation for all stakeholders and put new sustainability regulatory requirements at the centre of attention.

A project, designed to enhance RadiciGroup's transparency and commitment to develop a responsible business along its entire value chain from an economic, social and environmental perspective and focus on the ever more widespread and stringent sustainability regulatory requirements. These are the features and goals of the Sustainability Plan presented by the Group and called "From Earth to Earth", precisely to emphasize the intent to focus on the Earth and future generations.

“From Earth to Earth”: The new plan defines goals and concrete actions in Environmental, Social and Governance (ESG) areas to foster value creation for all stakeholders and put new sustainability regulatory requirements at the centre of attention.

A project, designed to enhance RadiciGroup's transparency and commitment to develop a responsible business along its entire value chain from an economic, social and environmental perspective and focus on the ever more widespread and stringent sustainability regulatory requirements. These are the features and goals of the Sustainability Plan presented by the Group and called "From Earth to Earth", precisely to emphasize the intent to focus on the Earth and future generations.

In the context of a complex and constantly changing scenario, the Group has therefore decided to capitalize on the goals achieved and look beyond them with a plan defining the medium-term targets and the actions to be taken to fulfil them and covering all areas considered to be "material”, i.e., relevant from the point of view of ESG and financial risks, opportunities and impacts. Indeed, the ultimate goal of "From Earth to Earth" is to support business continuity and the growth of the company and all its stakeholders.

The project was the result of a multi-year collaboration with Deloitte, which contributed an external and objective viewpoint on the definition of the material targets and themes. However, it was not an armchair exercise, but the result of an extensive listening process involving internal and external stakeholders, all of whom were sustainability experts who helped define a shortlist of strategic themes for both the Group and its main stakeholders. These issues were then analysed in detail using working tables on the different themes to identify the objectives in Environmental, Social and Governance areas and the related concrete actions needed to achieve them, in line with the European decarbonization and energy transition policies and the
United Nations Sustainable Development Goals, a global blueprint for sustainable growth.

In particular, RadiciGroup’s environmental goals include: a 20% increase and differentiation in renewable source electricity consumption, an 80% reduction in total direct greenhouse gas emissions by 2030 compared to 2011, attention to water consumption to limit the impact on local communities and biodiversity, the extension of Life Cycle Assessment (LCA) methodology to measure the environmental impact of 70% of the products (in terms of weight) manufactured by the entire Group, collaboration among the various actors in the supply chain from an ecodesign perspective and the search for increasingly more sustainable and circular packaging solutions.

EMPEL Green Theme Technologies
06.02.2024

PFAS-free and water-free textile finishing enters Japanese market

Green Theme Technologies (GTT), creators of the PFAS-free and water-free EMPEL® textile finishing platform, delivers advanced performance and a long term sustainability solution to the Japanese market. Green Theme Technologies, Inc. (GTT) is a US-based textile innovation company with a global vision to increase performance and eliminate pollution.

EMPEL® is a solution for textile mills looking to provide clean, high-performance finishes, and GTT actively promotes this innovative technology to all relevant Japanese companies, including mills, manufacturers, and brands. YKK, the Japanese global leader in zipper manufacturing, has already adopted the EMPEL® technology into their manufacturing process and promotes the technology globally in their new DynaPel™ collection.

Green Theme Technologies (GTT), creators of the PFAS-free and water-free EMPEL® textile finishing platform, delivers advanced performance and a long term sustainability solution to the Japanese market. Green Theme Technologies, Inc. (GTT) is a US-based textile innovation company with a global vision to increase performance and eliminate pollution.

EMPEL® is a solution for textile mills looking to provide clean, high-performance finishes, and GTT actively promotes this innovative technology to all relevant Japanese companies, including mills, manufacturers, and brands. YKK, the Japanese global leader in zipper manufacturing, has already adopted the EMPEL® technology into their manufacturing process and promotes the technology globally in their new DynaPel™ collection.

GTT’s activities in Japan are supported by the Japan External Trade Organization (JETRO), a government-related organization that works to promote mutual trade and investment between Japan and the rest of the world. GTT has been approved for JETRO’s Invest Japan Support Program, which allows GTT to leverage its resources to set up an office in Japan in the future and for J-Bridge Program to forge relationships with prospective Japanese partners.

Source:

Green Theme Technologies

Fraunhofer CCPE Positionspapier »Challenges and requirements in comparative life cycle assessment of plastics recycling« Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE
Fraunhofer CCPE Positionspapier »Challenges and requirements in comparative life cycle assessment of plastics recycling«
06.02.2024

Transparente Ökobilanzierung des Kunststoffrecyclings

Ökobilanzierungen dienen oftmals als Entscheidungsgrundlage für die Auswahl von umweltfreundlichen Verfahren, Einsatzstoffen oder Dienstleistungen beim Kunststoffrecycling. Doch wie sieht eine vergleichbare und transparente ökologische Bewertung aus, die unterschiedlichen Ansprüchen gerecht wird? Fraunhofer CCPE Forschende haben zehn Herausforderungen und zehn Anforderungen herausgearbeitet, die Vergleichbarkeit und Transparenz bei der ökologischen Bewertung des Kunststoffrecycling erhöhen.

Ökobilanzierungen dienen oftmals als Entscheidungsgrundlage für die Auswahl von umweltfreundlichen Verfahren, Einsatzstoffen oder Dienstleistungen beim Kunststoffrecycling. Doch wie sieht eine vergleichbare und transparente ökologische Bewertung aus, die unterschiedlichen Ansprüchen gerecht wird? Fraunhofer CCPE Forschende haben zehn Herausforderungen und zehn Anforderungen herausgearbeitet, die Vergleichbarkeit und Transparenz bei der ökologischen Bewertung des Kunststoffrecycling erhöhen.

Mit Ökobilanzstudien lassen sich nicht nur Produkte und Dienstleistungen über ihren gesamten Lebenszyklus hinweg bewerten, sondern es können auch verschiedene Recyclingverfahren und recycelter Kunststoff mit Neuware verglichen werden. Die Ergebnisse dienen als Entscheidungsgrundlage bei der Auswahl der Optionen mit den geringsten Umweltwirkungen. Die grundlegende Vergleichsgröße in jeder Ökobilanz ist die funktionelle Einheit. Alle Umweltwirkungen werden auf diese Größe bezogen. Das Recycling von Kunststoffen erfüllt immer mehrere Funktionen wie die ordnungsgemäße Behandlung von Abfällen und die Bereitstellung neuer Ressourcen für weitere Produkte. Der Umgang mit dieser Multifunktionalität in der Ökobilanzierung des Recyclings wird seit langem ohne Konsens diskutiert.

Die Fraunhofer CCPE-Forschenden möchten mit ihrem gerade erschienenen Positionspapier diese Herausforderungen und Anforderungen verdeutlichen, die bei der Bewertung und dem Vergleich von Kunststoffrecyclingaktivitäten bestehen. Der Fokus liegt auf der Unterscheidung zwischen den Funktionalitäten der Abfallbehandlung und Materialbereitstellung. »Wir wollen mit dem Positionspapier Raum für einen offenen und transparenten Austausch zwischen Wissenschaft, Industrie und Politik eröffnen, um Entscheidungen auf Basis des ökologischen Vergleichs verständlich und belastbar zu gestalten«, so Anna Kerps, Initiatorin des Positionspapiers und wissenschaftliche Mitarbeiterin des Fraunhofer CCPE.

Die Autor*innen weisen darauf hin, dass vergleichende Ökobilanzen zudem von verschiedenen Randbedingungen und Annahmen abhängen. Die Prüfung logischer Widersprüche in den Annahmen ist eine Hauptanforderung für aussagekräftige Vergleiche. Inkonsistente Ökobilanzstudien führen oft zu Fehlinterpretationen. Weitere Herausforderungen sehen sie im Umgang mit den verschiedenen Technologierouten und -skalen sowie der Komplexität von Recyclingrouten gemischter Abfälle. Unterschiedliche Abfallherkünfte und mitgesammelte Störstoffe beeinflussen die Qualität der Rezyklate – und müssen in der Bilanzierung berücksichtigt werden.

Weiterhin ist es auf methodischer Ebene wichtig, Modellierungsansätze in Bezug auf Multifunktionalität und Systemgrenzen zu verbessern. Der Vergleich verschiedener Recyclingverfahren und von Neuware mit Rezyklat ist herausfordernd, da sie unterschiedliche Funktionalitäten haben. Insgesamt fehlt es bisher an einem methodischen Konsens, um robuste und vergleichbare Ökobilanz-Ergebnisse zu erhalten.

Source:

Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE

AkzoNobel participates in research program with SusInkCoat project (c) The Dutch Research Council (NWO)
05.02.2024

AkzoNobel participates in research program with SusInkCoat project

More than 82 companies, businesses and social organizations – including AkzoNobel – are involved in a major Dutch research program focused on developing new technologies that will help solve some of today’s societal challenges.
 
Seven broad consortia have been established as part of the government-funded “Perspectief” program, with AkzoNobel set to play a leading role in the SusInkCoat project, which will explore how to make inks and coatings more sustainable.

The company will work together with private partners and other societal stakeholders to develop new materials, processes and applications to improve the durability, functionality and recyclability of coatings, thin films and inks. The program, which will run for the next five years, is backed by the Ministry of Economic Affairs and Climate Policy and the Dutch Research Council (NWO).

More than 82 companies, businesses and social organizations – including AkzoNobel – are involved in a major Dutch research program focused on developing new technologies that will help solve some of today’s societal challenges.
 
Seven broad consortia have been established as part of the government-funded “Perspectief” program, with AkzoNobel set to play a leading role in the SusInkCoat project, which will explore how to make inks and coatings more sustainable.

The company will work together with private partners and other societal stakeholders to develop new materials, processes and applications to improve the durability, functionality and recyclability of coatings, thin films and inks. The program, which will run for the next five years, is backed by the Ministry of Economic Affairs and Climate Policy and the Dutch Research Council (NWO).

“Our discussions about collaborating with our SusInkCoat partners have been very positive,” says AkzoNobel’s R&D Director of Scientific Academic Programs, André van Linden, who is also the co-lead of SusInkCoat. “We’re all facing the same societal challenges – how to become more circular – and we’re looking for the same solutions in different application areas. But we’ve never done that together for this specific research topic, so we need an ecosystem to help us solve these challenges.
 
Van Linden adds that the program – one of many R&D projects the company is involved with – will also support AkzoNobel’s ambition to achieve 50% less carbon emissions in its own operations – and across the value chain – by 2030.
 
 “We want to make the recyclability of materials - such as furniture, building materials and steel constructions - easier by introducing functionalities like self-healing, higher durability and triggered release,” he continues. “The more you can leave the materials in their original state, the more sustainably you can operate.”

AkzoNobel will be collaborating with Canon, Evonik, GFB, PTG and RUG Ventures, who together possess extensive knowledge of market demands, supply chains and production processes. All the SusInkCoat partners will also work with academic researchers at several Dutch universities in an effort to identify promising developments that can be commercialized, used for education purposes or for outreach to the public.

Research being conducted by the other six consortia includes investigating methods to make tastier plant-based food; flat optics for more sustainable hi-tech equipment; and cheaper and more accessible medical imaging technology.

More information:
AkzoNobel Coatings Sustainability
Source:

AkzoNobel

RUDOLF: Bio-based products for HYDROCOOL® technology (c) Rudolf GmbH
05.02.2024

RUDOLF: Bio-based products for HYDROCOOL® technology

RUDOLF announces a significant leap in textile performance with the introduction of bio-based innovations for its HYDROCOOL® technology, a moisture management product line.

HYDROCOOL® technologies have long been the standard for wicking moisture away from the skin to keep athletes and active people comfortable and dry. RUDOLF has taken this performance to a higher level with the integration of bio-based raw materials and their new products, RUCO®-PUR BIO SLB and FERAN® BIO ICR. These bio-based ingredients, derived from renewable sources offering:

RUDOLF announces a significant leap in textile performance with the introduction of bio-based innovations for its HYDROCOOL® technology, a moisture management product line.

HYDROCOOL® technologies have long been the standard for wicking moisture away from the skin to keep athletes and active people comfortable and dry. RUDOLF has taken this performance to a higher level with the integration of bio-based raw materials and their new products, RUCO®-PUR BIO SLB and FERAN® BIO ICR. These bio-based ingredients, derived from renewable sources offering:

  • Reduced environmental impact: By using bio-based materials, RUDOLF reduces its reliance on traditional petroleum-based raw materials, minimizing the environmental footprint of its products.
  • High performance: The new bio-based formulations are as efficient as the traditional HYDROCOOL® products and offer maximum wash resistance.
  • RUCO®-PUR BIO SLB is a bio-based finishing agent that is ideal for synthetics, cellulosic and blends. It offers a bio-based content of 43% and is therefore an important step towards a more sustainable textile industry.
  • FERAN® BIO ICR is a bio-based soil release agent specially developed for polyester and its blends. It has a 87% bio-based content, further underlining the commitment from RUDOLF for sustainable innovation.
Source:

Rudolf GmbH

IHKIB: Green Transformation Journey of the Turkish Apparel Industry (c) Istanbul Apparel Exporters' Association (IHKIB)
TIM and IHKIB President Mustafa Gültepe
05.02.2024

IHKIB: Green Transformation Journey of the Turkish Apparel Industry

The fashion industry, which has strategic importance for the Turkish economy with its value-added production, employment, and exports, came together with representatives of global brands and Laison offices at the 'Green transformation' summit. At the meeting hosted by the Istanbul Apparel Exporters' Association (IHKIB), the studies carried out in the process of adaptation to the Green Deal were put under the spotlight, and the expectations of the Turkish fashion industry from the stakeholders were also expressed.

The opening of the meeting, attended by representatives of relevant ministries and foreign representations, national and international fund providers, as well as brands and buying groups were brought together, was made by Türkiye Exporters Assembly (TIM) and IHKIB President Mustafa Gültepe. In his speech, Gültepe underlined Türkiye's importance in the global apparel industry, by realizing approximately 3.5 percent of world apparel exports. Gültepe continued as follows:

The fashion industry, which has strategic importance for the Turkish economy with its value-added production, employment, and exports, came together with representatives of global brands and Laison offices at the 'Green transformation' summit. At the meeting hosted by the Istanbul Apparel Exporters' Association (IHKIB), the studies carried out in the process of adaptation to the Green Deal were put under the spotlight, and the expectations of the Turkish fashion industry from the stakeholders were also expressed.

The opening of the meeting, attended by representatives of relevant ministries and foreign representations, national and international fund providers, as well as brands and buying groups were brought together, was made by Türkiye Exporters Assembly (TIM) and IHKIB President Mustafa Gültepe. In his speech, Gültepe underlined Türkiye's importance in the global apparel industry, by realizing approximately 3.5 percent of world apparel exports. Gültepe continued as follows:

"As IHKIB, we aim to increase our current annual exports, which are around $20 billion, to $40 billion. The road to the goal goes through Europe and America because the European Union is our largest market in apparel. We export 60 percent of our total apparel exports to EU countries. When we add other European countries and the USA, the ratio approaches 75 percent. While working on alternatives for the $40 billion in exports, we need to focus more on the European and U.S. markets because, as the data shows, the path to $40 billion in apparel exports goes through Europe and the U.S. We already have long-standing collaborations with brands centered in Europe and America. With our knowledge, speed, production quality, design power, and geographical proximity to Europe, we distinguish ourselves from competitors. We took a very important step in the transformation process exactly one year ago. We shared our action plan, which is a road map for our fashion industry's compliance with the Green Deal, with the public on January 30, 2023."

After Mustafa Gültepe's opening speech, Euratex Director General Dirk Vantyghem, Deputy Director General of the Ministry of Trade Bahar Güçlü, and Deputy Secretary General of ITKIB Özlem Güneş made presentations regarding the ongoing efforts in the Green Deal process.

Dirk Vantyghem discussed the sustainability strategy of the textile and apparel industry and the expectations from the EU administration, while Bahar Güçlü provided information about the reflections of legal regulations related to the Green Deal on Türkiye.

Deputy Secretary General of ITKIB Özlem Güneş emphasized the significant opportunity that the Green Deal represents for the Turkish apparel industry, providing comprehensive insights into the efforts conducted by IHKIB regarding the Green Deal adaptation process.

Source:

Istanbul Apparel Exporters' Association (IHKIB)

Indorama Ventures awarded by EcoVadis Sustainability Assessment (c) Indorama Ventures
02.02.2024

Indorama Ventures awarded by EcoVadis Sustainability Assessment

Indorama Ventures Public Company Limited has been awarded the 'Platinum Medal' by EcoVadis Sustainability Assessment, underscoring the company's commitment to sustainability.

Indorama Ventures actively participates in the annual EcoVadis assessment to measure its sustainable practices, ensuring alignment with the diverse requirements of key customers across various business segments and operations. In the latest evaluation for 2024, the company achieved a Platinum Medal with a score of 80, surpassing last year’s score of 77. Indorama Ventures is ranked in the top 1% of all companies assessed within the primary industries of basic chemicals. The company demonstrated above industry-average performance in all four assessment areas: environment, labor human rights, ethics, and sustainable procurement.

Indorama Ventures Public Company Limited has been awarded the 'Platinum Medal' by EcoVadis Sustainability Assessment, underscoring the company's commitment to sustainability.

Indorama Ventures actively participates in the annual EcoVadis assessment to measure its sustainable practices, ensuring alignment with the diverse requirements of key customers across various business segments and operations. In the latest evaluation for 2024, the company achieved a Platinum Medal with a score of 80, surpassing last year’s score of 77. Indorama Ventures is ranked in the top 1% of all companies assessed within the primary industries of basic chemicals. The company demonstrated above industry-average performance in all four assessment areas: environment, labor human rights, ethics, and sustainable procurement.

Source:

Indorama Ventures

02.02.2024

Zweite Förderphase des Innovationsnetzwerkes für elektrische Leichtfahrzeuge

Das Innovationsnetzwerk FAKOSI - Komfort- und Sicherheitstechnologien für elektrische Leichtfahrzeuge (LEVs) wird für weitere zwei Jahre aus Mitteln des Zentralen Innovationsprogramm Mittelstand (ZIM) gefördert. Einen entsprechenden Antrag hat das Bundesministerium für Wirtschaft und Klimaschutz (BMWK) bewilligt. Damit werden bis September 2025 weiterhin Fördermittel für die Entwicklung von innovativen Konzepten, Systemen und Komponenten im Bereich LEVs gestellt und die technologische Wettbewerbsfähigkeit und Innovationskraft von kleinen und mittleren Unternehmen (KMU) gestärkt. Hierbei werden Schwerpunkte in den Themen Insassen- und Fußgängerschutz, Unfallvermeidung, Crashsicherheit, persönliche Schutzausrüstung sowie in der Digitalisierung und Vernetzung von Systemen verfolgt.

Das Innovationsnetzwerk FAKOSI - Komfort- und Sicherheitstechnologien für elektrische Leichtfahrzeuge (LEVs) wird für weitere zwei Jahre aus Mitteln des Zentralen Innovationsprogramm Mittelstand (ZIM) gefördert. Einen entsprechenden Antrag hat das Bundesministerium für Wirtschaft und Klimaschutz (BMWK) bewilligt. Damit werden bis September 2025 weiterhin Fördermittel für die Entwicklung von innovativen Konzepten, Systemen und Komponenten im Bereich LEVs gestellt und die technologische Wettbewerbsfähigkeit und Innovationskraft von kleinen und mittleren Unternehmen (KMU) gestärkt. Hierbei werden Schwerpunkte in den Themen Insassen- und Fußgängerschutz, Unfallvermeidung, Crashsicherheit, persönliche Schutzausrüstung sowie in der Digitalisierung und Vernetzung von Systemen verfolgt.

Um die konkreten Entwicklungsbedarfe zu adressieren vereint FAKOSI Kompetenzen in Materialwissenschaften, Leichtbau, Fertigungsverfahren, Sensorik, Informatik und weiteren naturwissenschaftlich-technischen Fachrichtungen mit mittelständischen Herstellern und Dienstleistern aus den Bereichen Machine Vision, Embedded Systems und KI.  Der dadurch im Netzwerkverbund entstehende Technologie- und Wissenstransfer sichert insbesondere KMU eine hohe Wettbewerbsfähigkeit.

Aktuell sind acht Unternehmen und vier Forschungseinrichtungen an FAKOSI beteiligt. Interessierte Unternehmen und Forschungseinrichtungen sowie potenzielle Anwender:innen können weiterhin an dem Innovationsnetzwerk oder an den daraus entstehenden F&E-Projekten partizipieren. Im Zuge der Mitgliedschaft werden die Partner:innen aktiv bei der Identifizierung und Initiierung von Innovationsprojekten sowie der Sicherstellung von Finanzierungen durch Fördermittelakquise unterstützt.

Zwei Anträge auf ZIM-Projektförderung wurden im Rahmen von FAKOSI bereits bewilligt. Im Innovationsprojekt "AutoFL" strebt die Katulu GmbH den Aufbau eines automatisierten Federated Learning Ansatzes an. Unter Einbezug höchstmöglicher Data Privacy soll dieser Ansatz es kleineren und mittleren Unternehmen ermöglichen, fortschrittliche Techniken des Machine Learning zu nutzen, selbst wenn keine Data-Science-Expertise im Unternehmen vorhanden ist. Die Katulu GmbH mit Sitz in Hamburg ist auf die Entwicklung von industriellen FL-Lösungen spezialisiert. Das Unternehmen berät Industrieunternehmen aus Branchen wie Maschinenbau, Halbleiter und Chemie bei der Entwicklung souveräner und nachhaltiger Industrie 4.0-Lösungen. Im ZIM-Innovationsprojekt "WindMate" haben sich die Ventus Technologies GmbH und das Lehr- und Forschungsgebiet Fahrzeugsicherheit der Ostfalia Hochschule für angewandte Wissenschaften zusammengeschlossen, um ein wegweisendes präventives Warnsystem vor starken Windböen im Straßenverkehr zu entwickeln. Durch den neuen digitalen Assistenten soll die Verkehrssicherheit für LKW und andere Nutzfahrzeuge windanfällige Fahrzeugklassen maßgeblich erhöht werden.

Ebenfalls wurde ein Antrag auf Forschungszulage für den Zeitraum von zwei Kalenderjahren erfolgreich bewilligt. Mit dem Forschungszulagengesetz (FZulG) haben Unternehmen und Start-ups einen Rechtsanspruch auf die steuerliche Förderung ihrer Aufwendungen für Forschung und Entwicklung (F&E). Die Forschungszulage kann für bis zu vier Jahren rückwirkend beantragt werden.

Die IWS GmbH hat das Netzwerkmanagement für FAKOSI übernommen und unterstützt die Partner:innen von der ersten Idee über die Suche nach passenden Projektpartner:innen bis zur Ausarbeitung und Koordination von Förderanträgen. Die Grundlage der Finanzierung der F&E-Vorhaben soll das Zentrale Innovationsprogramm Mittelstand (ZIM) des Bundesministeriums für Wirtschaft und Klimaschutz bilden, das durch weitere Bundes- und EU-Programme ergänzt wird.

FAKOSI-Netzwerkpartner:innen: CESYS GmbH, GeBioM mbH, Katulu GmbH, Momes Gmb, SkySpirit GmbH,tagItron GmbH, Treo - Labor für Umweltsimulation GmbH, Ventus Technologies GmbH, BIBA - Bremer Institut für Produktion und Logistik GmbH, Faserinstitut Bremen e. V. (FIBRE), Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung IFAM, Ostfalia Hochschule für angewandte Wissenschaften

29.01.2024

Refashion: Renewal of accreditation for 2023-2028

Refashion, a textile industry’s eco-organisation, has renewed its authority approval until 2028. 6 years during which it will continue to transform the industry in keeping with the objectives set by the French Ministry of Ecological Transition and the French Ministry of the Economy, including the objective to collect 60% of CHF (clothing, household linen and footwear textiles) placed on the market by 2028. This new period is reflected in an ambitious road map and significantly increased investment. Nearly 1.2 billion euros, financed by the marketers, will be spent on transforming the industry during this new period of authority approval.

Refashion, a textile industry’s eco-organisation, has renewed its authority approval until 2028. 6 years during which it will continue to transform the industry in keeping with the objectives set by the French Ministry of Ecological Transition and the French Ministry of the Economy, including the objective to collect 60% of CHF (clothing, household linen and footwear textiles) placed on the market by 2028. This new period is reflected in an ambitious road map and significantly increased investment. Nearly 1.2 billion euros, financed by the marketers, will be spent on transforming the industry during this new period of authority approval.

Determined to achieve the objectives set out in the ambitious specifications set down by the Secretary of State at the Ministry of Ecological Transition, Berangère Couillard, Refashion has worked on a road map with all of its stakeholders involved in the transformation that is underway. Maud Hardy, nominated as the eco-organisation’s CEO in January 2022, started a collaborative working method that will continue throughout this new period to support areas that are key in this transformation. In the next few months, projects will begin and will visibly highlight the progress made in the three phases of a product’s life cycle: production consumption, regeneration.

Production

  • Recognising eco-design initiatives through the eco-modulation of the fees paid by marketers (durability, environmental information labelling, integration of recycled materials). For marketers, these initiatives should represent the scheme’s cornerstone. The aim is to involve all stakeholders in reducing the environmental impact of products.

Consumption

  • As from 2023, Refashion will spend 5 million euros minimum per year in awareness-raising activities and on information to the general public by supporting an array of local authority initiatives.
  • The launch of a repair fund in 2023, in particular to prolong the usage of textiles and footwear products. More than 150 million euros will be invested between 2023 and 2028 to change the habits of the French population to increase repairs by 35% (guideline target by the ADEME 2019).

Regeneration

  • Accelerating clothing, household linen and footwear collection, in particular thanks to an operational mix in the sector. Funding traditional sorting operators will remain central, but Refashion will also develop an additional operational system in order to achieve the collection target of 60% of products placed onto the market (versus 34% in 2021).
  • 5% of fees paid to Refashion will go towards the redeployment/reuse funds to provide support for reuse within the remit of stakeholders in the Social and Solidarity Economy. In addition to this funding, additional funding arrangements open to all stakeholders will be established. The total budget throughout the authority approval period represents 135 million euros.
  • 5% of fees, i.e., 58 million euros in 6 years, will be spent on R&D to help achieve these milestones in order to industrialise the recycling of used CHF: recyclability that is considered during the design stage; automated sorting and recycling.
Source:

Refashion

MACH2®XS Photo SHIMA SEIKI MFG., LTD.
MACH2®XS
28.01.2024

SHIMA SEIKI at Dhaka International Textile & Garment Machinery Exhibition 2024

Operating in Bangladesh since 1996, this is the fourteenth time the Japanese manufacturer is participating in DTG.

As the Bangladeshi textile industry calls for sustainable production through innovation and digitalization, the market is keen to establish effective business models that support such production. In response, for the first time in its DTG exhibition history, SHIMA SEIKI's lineup consists entirely of WHOLEGARMENT® knitting machines. Capable of knitting an entire garment in one piece without the need for linking or sewing while using only the material required to knit one garment at a time, WHOLEGARMENT® knitting is famous for promoting sustainability in the knit factory.

Operating in Bangladesh since 1996, this is the fourteenth time the Japanese manufacturer is participating in DTG.

As the Bangladeshi textile industry calls for sustainable production through innovation and digitalization, the market is keen to establish effective business models that support such production. In response, for the first time in its DTG exhibition history, SHIMA SEIKI's lineup consists entirely of WHOLEGARMENT® knitting machines. Capable of knitting an entire garment in one piece without the need for linking or sewing while using only the material required to knit one garment at a time, WHOLEGARMENT® knitting is famous for promoting sustainability in the knit factory.

The company is showing its MACH2®XS153 WHOLEGARMENT® knitting machine in 15L gauge, as well as its SWG®091N2 "Mini" WHOLEGARMENT® knitting machine in 15 gauge. MACH2®XS features 4 needle beds and SHIMA SEIKI's original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® knitwear in all needles. SWG®091N2 provides opportunities in WHOLEGARMENT® knitting across a wide range of items in a compact, economical package. A different approach to WHOLEGARMENT knitting is also shown in the form of the N.SVR®183 machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in fine gauge. Shown in 18 gauge at DTG, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

Demonstrations are performed on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s "Total Fashion System" concept, it provides comprehensive support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion.

Source:

SHIMA SEIKI MFG., LTD.