From the Sector

Reset
850 results
Foto McLaren
13.10.2022

TUMI und McLaren: Reisekollektion mit Kohlefasermaterial

TUMI, internationale Reise- und Lifestyle-Marke, stellt die jüngsten Ergänzungen ihrer Kollektion vor, die in Zusammenarbeit mit dem Sportwagenhersteller und Motorsportteam McLaren entwickelt wurde.
 
Die Designteams von TUMI und McLaren haben eine Capsule-Kollektion entworfen, die die Grenzen des Leichtgewichts und der Leistung weiter hinaustreibt.
 
Für die neue Farbgebung wurden Teile der aktuellen Kollektion aus CX6TM, einem flexiblen Kohlefasermaterial, neu konstruiert. Als Hochleistungsgewebe verfügt CX6TM über besondere Eigenschaften, die zu einem abriebfesten Material führen, um die Reinheit und Langlebigkeit der Kohlefaser zu bewahren.
 
Die Kollektion umfasst den Aero International, einen erweiterbaren Handgepäckkoffer in Carbon und geformter Carbonfaser mit Tegris-Seitenteilen sowie den Velocity Rucksack, den Torque Sling und den Quantum Duffel, die mit Lederdetails ausgestattet sind.

TUMI, internationale Reise- und Lifestyle-Marke, stellt die jüngsten Ergänzungen ihrer Kollektion vor, die in Zusammenarbeit mit dem Sportwagenhersteller und Motorsportteam McLaren entwickelt wurde.
 
Die Designteams von TUMI und McLaren haben eine Capsule-Kollektion entworfen, die die Grenzen des Leichtgewichts und der Leistung weiter hinaustreibt.
 
Für die neue Farbgebung wurden Teile der aktuellen Kollektion aus CX6TM, einem flexiblen Kohlefasermaterial, neu konstruiert. Als Hochleistungsgewebe verfügt CX6TM über besondere Eigenschaften, die zu einem abriebfesten Material führen, um die Reinheit und Langlebigkeit der Kohlefaser zu bewahren.
 
Die Kollektion umfasst den Aero International, einen erweiterbaren Handgepäckkoffer in Carbon und geformter Carbonfaser mit Tegris-Seitenteilen sowie den Velocity Rucksack, den Torque Sling und den Quantum Duffel, die mit Lederdetails ausgestattet sind.

More information:
Kohlefasermaterial McLaren TUMI
Source:

McLaren

(c) INDIA
13.10.2022

Finalists for Hygienix Innovation Award™ announced

  • Absorbent Hygiene Products Featuring Advanced Technology Announced:
    pH monitoring pantyliner (Kimberly-Clark), roll dispensing period product (Egal Pad) and novel potty training pad (Sposie Kids)

Three new absorbent disposable hygiene products that provide users with greater protection, convenience and discretion are the finalists for the Hygienix Innovation Award™ that will be selected at Hygienix™, the premier event for absorbent hygiene and personal care markets, Nov. 14-17, at The Roosevelt New Orleans Hotel.

The annual award recognizes and rewards innovation that uses nonwoven material or technology in a way that provides consumer benefit and expands its usage.  
Each of the companies will present their products during the event on Nov. 15 and INDA’s Director of Education & Technical Affairs Matt O’Sickey will announce the winner on Nov. 17, at 11:30 a.m. to conclude Hygienix™.  

  • Absorbent Hygiene Products Featuring Advanced Technology Announced:
    pH monitoring pantyliner (Kimberly-Clark), roll dispensing period product (Egal Pad) and novel potty training pad (Sposie Kids)

Three new absorbent disposable hygiene products that provide users with greater protection, convenience and discretion are the finalists for the Hygienix Innovation Award™ that will be selected at Hygienix™, the premier event for absorbent hygiene and personal care markets, Nov. 14-17, at The Roosevelt New Orleans Hotel.

The annual award recognizes and rewards innovation that uses nonwoven material or technology in a way that provides consumer benefit and expands its usage.  
Each of the companies will present their products during the event on Nov. 15 and INDA’s Director of Education & Technical Affairs Matt O’Sickey will announce the winner on Nov. 17, at 11:30 a.m. to conclude Hygienix™.  

Egal Pads: Pads on a Roll™ –A wrapped super-thin absorbent period pad that dispenses like toilet paper in public bathroom stalls, preventing the personal embarrassment of not having a menstrual product when needed. This product promotes period product accessibility and destigmatizes menstrual health. It is targeted to schools and universities and the away-from-home market.

Kimberly-Clark: Kotex® Pantyliner with pH Indicator – The new Kotex Pantyliner with pH indicator, shifts color at the moment it needs to be replaced. This technology works by changing the color from yellow to blue when activated by fluids such as urine, sweat, or others. By indicating the moment to change the product, helps to maintain the intimate area clean, fresh, and consequently healthy.

Sposie Kids: Sposie® Dribbles® Potty Training Pads – An absorbent potty training pad that adheres to boy’s and girl’s underwear to protect against leaks and accidents during the transition from diapers to underwear, while still providing physical cues to the wearer to promote potty training.  The pads absorb over half of an average 2-year-old’s bladder capacity and are 100 percent free from any fragrance, latex, and chlorine.

Hygienix™ Conference Highlights
In addition to the award presentation, the Hygienix™ conference will focus on sustainability with presentations by more than 20 industry experts on sustainable inputs, natural fibers, product transparency, reusable menstrual products, recyclable diapers and the latest market forecasts and insights into consumer buying trends.
Hygienix™ will also offer two specialized workshops, a myriad of business connection opportunities, a welcome reception, first-time attendee mentorship program, and two evenings of tabletop receptions.

More information:
Hygienix India
Source:

INDIA

12.10.2022

Wirksamkeit von Thromboseprophylaxestrümpfen

  • Welt-Thrombose-Tag am 13. Oktober
  • BVMed: „Evidenz für mechanische Thromboseprophylaxe einbeziehen“

Die Lungenembolie ist eine der häufigsten tödlichen Herz-Kreislauf-Erkrankungen, jährlich sterben in Deutschland über 40.000 Menschen an ihren Folgen. Häufigste Ursache ist eine Thrombose. Für diese gibt es gute und moderne Präventionsmaßnahmen sowie Therapieoptionen. Die BVMed-Expert:innen im Fachbereich Mechanische Thrombosepropyhlaxe (FBMT) unterstützen daher die aktuelle Kampagne „Pro & Contra moderner Thrombose-Therapien!“ des Aktionsbündnisses Thrombose zum Welt-Thrombose-Tag am 13. Oktober.

  • Welt-Thrombose-Tag am 13. Oktober
  • BVMed: „Evidenz für mechanische Thromboseprophylaxe einbeziehen“

Die Lungenembolie ist eine der häufigsten tödlichen Herz-Kreislauf-Erkrankungen, jährlich sterben in Deutschland über 40.000 Menschen an ihren Folgen. Häufigste Ursache ist eine Thrombose. Für diese gibt es gute und moderne Präventionsmaßnahmen sowie Therapieoptionen. Die BVMed-Expert:innen im Fachbereich Mechanische Thrombosepropyhlaxe (FBMT) unterstützen daher die aktuelle Kampagne „Pro & Contra moderner Thrombose-Therapien!“ des Aktionsbündnisses Thrombose zum Welt-Thrombose-Tag am 13. Oktober.

Eine wichtige Entscheidungshilfe wird in Zukunft die S3-Leitlinie „Prophylaxe der venösen Thromboembolie (VTE)“ der medizinischen Fachgesellschaften sein. Die Veröffentlichung ist für Ende 2024 geplant. Der BVMed-Fachbereich weist auf die Notwendigkeit hin, bei der Aktualisierung Evidenz heranzuziehen. „Die Ergebnisse des Cochrane-Reviews zeigen beispielsweise die Wirksamkeit von medizinischen Thromboseprophylaxestrümpfen (MTPS) bei hospitalisierten Patient:innen zur Verhinderung von tiefen Venenthrombosen (TVT). Das muss in der Leitlinie einbezogen werden“, erklärt Juliane Pohl vom BVMed. Weitere Informationen zum Thema können unter www.bvmed.de/thrombose abgerufen werden.

Wie viele wissenschaftliche Studien zeigen, bietet eine Kombination aus mechanischen und pharmakologischen Maßnahmen die beste Prävention vor einer venösen Thromboembolie und sollte immer auf einer individuellen Risikoabschätzung basieren.

Neben der medikamentösen Thromboseprophylaxe sind es vor allem die physikalischen Maßnahmen, die bei richtiger Anwendung einfach und nahezu nebenwirkungsfrei dazu beitragen, thromboembolische Komplikationen zu verhindern. Beispielsweise erhöhen medizinische Thromboseprophylaxestrümpfe bei immobilen Patient:innen die venöse Rückstromgeschwindigkeit und sorgen so in Kombination mit Arzneimitteln für einen optimierten Schutz vor einer Thromboembolie.

„Die physikalische Prophylaxe stellt eine der drei wesentlichen Säulen zur Verhinderung venöser Thrombosen und deren Folgen, wie dem postthrombotischen Syndrom oder der Lungenembolie, dar“, so der BVMed. „Ausschließlich pharmakologische Maßnahmen reichen nach dem heutigen Stand der Wissenschaft nicht aus. Wenn möglich, sollten physikalische und pharmakologische Maßnahmen sinnvoll miteinander kombiniert werden.“

More information:
BVMed Thrombosestrümpfe
Source:

BVMed | Bundesverband Medizintechnologie e.V.

Photo: Indorama Ventures Limited
12.10.2022

Indorama Ventures: New plant for nylon yarn

  • Collaboration between Indorama Ventures and Toyobo to meet growing global demand for airbags
  • Newly completed plant in Thailand will supply high-performance nylon yarn to customers in the automotive safety sector

Indorama Ventures Public Company Limited (IVL) celebrated the completion of a plant to manufacture high-performance nylon yarn for automobile airbags. The new plant in Rayong, Thailand, was constructed by Toyobo Indorama Advanced Fibers Co., Ltd. (TIAF), a joint venture that Indorama Ventures established with Toyobo Co., Ltd in November 2020.

The plant, which has been built on the site of Indorama Polyester Industries PCL (IPI) in Rayong Province, will deliver 11,000 tons of high-performance yarn per year to meet global demand for airbags that is expected to grow by 3 percent to 4 percent annually as automakers equip vehicles with more airbags and emerging economies require cars to adopt more safety features. Test production is scheduled to start in October 2022 with the goal of starting commercial production in the middle of 2023.

  • Collaboration between Indorama Ventures and Toyobo to meet growing global demand for airbags
  • Newly completed plant in Thailand will supply high-performance nylon yarn to customers in the automotive safety sector

Indorama Ventures Public Company Limited (IVL) celebrated the completion of a plant to manufacture high-performance nylon yarn for automobile airbags. The new plant in Rayong, Thailand, was constructed by Toyobo Indorama Advanced Fibers Co., Ltd. (TIAF), a joint venture that Indorama Ventures established with Toyobo Co., Ltd in November 2020.

The plant, which has been built on the site of Indorama Polyester Industries PCL (IPI) in Rayong Province, will deliver 11,000 tons of high-performance yarn per year to meet global demand for airbags that is expected to grow by 3 percent to 4 percent annually as automakers equip vehicles with more airbags and emerging economies require cars to adopt more safety features. Test production is scheduled to start in October 2022 with the goal of starting commercial production in the middle of 2023.

In 2014, Indorama Ventures and Toyobo jointly acquired Germany’s PHP Fibers GmbH, a leading airbag yarn maker. Since then, both companies have strengthened their relationship with a focus to expand in the automotive safety sector. Mr Christopher Kenneally, based in Bangkok, leads IVL’s Fibers segment, which produces fibers and yarns across its Hygiene, Mobility and Lifestyle verticals. Mr Ashok Arora, with over 30 years of experience in fibers and polymer operations, will helm TIAF as CEO while maintaining his role as CTO with IVL Fibers.

Source:

Indorama Ventures Limited

(c) BRÜCKNER
The project team of BRÜCKNER and HEATHCOAT in BRÜCKNER’s Technology Centre in Leonberg
04.10.2022

BRÜCKNER: New finishing line for British company HEATHCOAT FABRICS

HEATHCOAT FABRICS partnered again with BRÜCKNER Textile Technologies and their sales partner ADVANCED DYEING SOLUTIONS to install a finishing line for industrial textiles. HEATHCOAT FABRICS specializes in the production of technical textiles in the fields of texturising, weaving and warp knitting as well as dyeing and finishing. The prroducts are manufactured for use in the automotive, healthcare, defence, and aerospace industries

Mrs. Regina Brückner, CEO and owner of the BRÜCKNER Group stated: "To meet the complex re-quirements of HEATHCOAT is not easy because of the great variety of technical textiles produced. Our line has to finish light as well as heavy articles, so the design, control and the whole line layout have to be flexible, functional and still easy to operate. Fortunately, the team at HEATHCOAT FABRICS is very innovative and open-minded, and together we worked hard to develop the right technology and han-dling. We are very happy that we could convince this customer, whom we appreciate very much, with the productivity of our line and of course with our technological know-how."

HEATHCOAT FABRICS partnered again with BRÜCKNER Textile Technologies and their sales partner ADVANCED DYEING SOLUTIONS to install a finishing line for industrial textiles. HEATHCOAT FABRICS specializes in the production of technical textiles in the fields of texturising, weaving and warp knitting as well as dyeing and finishing. The prroducts are manufactured for use in the automotive, healthcare, defence, and aerospace industries

Mrs. Regina Brückner, CEO and owner of the BRÜCKNER Group stated: "To meet the complex re-quirements of HEATHCOAT is not easy because of the great variety of technical textiles produced. Our line has to finish light as well as heavy articles, so the design, control and the whole line layout have to be flexible, functional and still easy to operate. Fortunately, the team at HEATHCOAT FABRICS is very innovative and open-minded, and together we worked hard to develop the right technology and han-dling. We are very happy that we could convince this customer, whom we appreciate very much, with the productivity of our line and of course with our technological know-how."

The direct gas heated BRÜCKNER POWER-FRAME stenter with its staggered heating source arrangement every half zone provides best available temperature consistency across the length and the width of the stenter. The unit is equipped with a low-lub, horizontally returning combined pin / clip chain and several fabric paths, especially designed for the different fabrics being processed. Together with HEATHCOAT FABRICS technologists, the BRÜCKNER design team developed a special delivery end of the stenter with different edge trimming and slitting possibilities. Depending on the kind of products, the fabrics can be batched on large diameter A-frames, wound on cardboard tubes or plaited into trolleys.

Source:

Brückner Trockentechnik GmbH & Co. KG

Photo: Messe Frankfurt (HK) Ltd.
29.09.2022

Cinte Techtextil China returns this December

Following its deferral earlier this year, organisers announced that Cinte Techtextil China 2022 will take place from 7 – 9 December at the National Exhibition and Convention Center, Shanghai. The coming edition will address the latest trends, technologies and applications that are shaping the industry and market in the region.

“We are excited that Cinte Techtextil China is going ahead this year,” said Ms Wilmet Shea, Deputy General Manager of Messe Frankfurt (HK) Ltd. “The technical textiles and nonwovens sectors are constantly innovating, and congregating regularly to share new materials and knowledge is essential for the industry. For this reason, this year’s fair has attracted international and domestic exhibitors from Austria, Belgium, Mainland China, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US to grow their business in the enticing Chinese market.”

Following its deferral earlier this year, organisers announced that Cinte Techtextil China 2022 will take place from 7 – 9 December at the National Exhibition and Convention Center, Shanghai. The coming edition will address the latest trends, technologies and applications that are shaping the industry and market in the region.

“We are excited that Cinte Techtextil China is going ahead this year,” said Ms Wilmet Shea, Deputy General Manager of Messe Frankfurt (HK) Ltd. “The technical textiles and nonwovens sectors are constantly innovating, and congregating regularly to share new materials and knowledge is essential for the industry. For this reason, this year’s fair has attracted international and domestic exhibitors from Austria, Belgium, Mainland China, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US to grow their business in the enticing Chinese market.”

The Chinese market performance has remained strong amidst the pandemic. According to the China Nonwovens & Industrial Textiles Association (CNITA), China’s nonwovens output has an average two-year growth rate of 14.8% despite the decreased demand for anti-pandemic materials. In addition, China strengthened its position as one of the key drivers of the global technical textiles market due to the rapid expansion of the automotive sector in the country which stimulates high demand for technical textiles.
To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations.

The fair is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA).

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd.

Im Projekt »InKa« wird die Wertschöpfungskette von Kaffeesatz erforscht.
20.09.2022

Fraunhofer UMSICHT: Neue biobasierte und zirkuläre Kunststoffe auf der K 2022

Für den ressourceneffizienten Einsatz von Kunststoffen entwickelt Fraunhofer UMSICHT neue Werkstoffe. Im Fokus stehen dabei Biokunststoffe, eine zirkuläre Kunststoffwirtschaft sowie Strategien zur Reduzierung von Makro- und Mikroplastik in der Umwelt. Fraunhofer UMSICHT präsentiert sich auf der K 2022 mit chemischen Zwischenprodukten aus Kaffeesatz, Folienwerkstoff auf Basis von TPU, PLA-Compounds für technische Bauteile mit erhöhtem Brandrisiko und abbaubaren Mulchfolien.

Für den ressourceneffizienten Einsatz von Kunststoffen entwickelt Fraunhofer UMSICHT neue Werkstoffe. Im Fokus stehen dabei Biokunststoffe, eine zirkuläre Kunststoffwirtschaft sowie Strategien zur Reduzierung von Makro- und Mikroplastik in der Umwelt. Fraunhofer UMSICHT präsentiert sich auf der K 2022 mit chemischen Zwischenprodukten aus Kaffeesatz, Folienwerkstoff auf Basis von TPU, PLA-Compounds für technische Bauteile mit erhöhtem Brandrisiko und abbaubaren Mulchfolien.

Forschende des Fraunhofer UMSICHT gewinnen im Projekt »InKa«, das die Wertschöpfungskette von Kaffeesatz erforscht, aus dem ungenießbaren Kaffeeöl ein chemisches Zwischenprodukt, das bei der Herstellung von Additiven für Kunststoffe zum Einsatz kommt. Den entölten Kaffeesatz versuchen sie, als alternativen Rohstoff für die Papier- und Kartonindustrie zu nutzen. »Eine besondere Herausforderung bei unserem Projekt ist das Scale-up der Verfahrensschritte vom Labor zur industriellen Fertigung. Das angestrebte Verfahren als Ganzes ist hoch innovativ und leistet einen wichtigen Beitrag bei der Nutzung von biobasierten Rohstoffen im Rahmen der Bioökonomie. Im Labormaßstab sehen wir bereits, dass unser Konzept aufgeht: Wir konnten die entwickelten Additive bereits in neuen Werkstoffrezepturen testen«, erklärt Inna Bretz, Abteilungsleiterin Zirkuläre und Biobasierte Kunststoffe des Fraunhofer UMSICHT.

Röntgendetektierbare Mehrwegschutzbekleidung
Die Entwicklung eines Folienwerkstoffs auf Basis von thermoplastischen Polyurethanen (TPU) und röntgendetektierbaren Additiven war das Ziel des Projekts »DetekTPU«. Bei der Produktion von Nahrungsmitteln ist Einwegschutzbekleidung zu tragen, um Sicherheits- und Hygienevorschriften einzuhalten. Neben einer großen Mengen Plastikmüll ergibt sich dabei zusätzlich das Problem, dass Teile der Schutzbekleidung in den Nahrungsmitteln landen können und dort nicht detektiert werden. Der entwickelte Werkstoff soll für zuverlässig röntgendetektierbare Mehrwegschutzbekleidung eingesetzt werden. Dies ist für dünne Kunststofffolien eine bisher nicht gelöste Herausforderung. »Die bisherigen Projektergebnisse sind vielversprechend, aktuell planen wir weitere Entwicklungsschritte mit unserem Projektpartner. Hierzu soll das Team um Experten aus dem Bereich Folienherstellung erweitert werden.«  berichtet Christina Eloo, Gruppenleiterin Kunststoffentwicklung.

Biobasierte Kunststoffe für technische Bauteile mit erhöhtem Brandrisiko
Technische Bauteile mit erhöhtem Brandrisiko, etwa in der Elektronikindustrie, erfordern flammgeschützte, wärmeformbeständige und schlagzähe Kunststoffe. Ein Großteil davon wird auf Erdölbasis hergestellt, dessen Vorräte begrenzt sind. Biokunststoffe erreichen jedoch oftmals noch nicht im vollen Umfang das vom Markt geforderte Eigenschaftsniveau konventioneller technischer Kunststoffe. Die Grenzen liegen insbesondere beim Brandverhalten, einer ausreichenden Temperaturbeständigkeit oder Schlagzähigkeit. Hier setzt »TechPLAstic« an: Es werden PLA-Compounds für langlebige Produkte anwendungs- und marktnah entwickelt - unter Berücksichtigung der jeweiligen Anforderungen und Kosten. Der Anwendungsfokus liegt zunächst auf technischen Produkten des Elektronik- und Bausektors wie beispielsweise Leuchten oder Schalter und Tasten in der Gebäudetechnik.

Mulchfolien mit angepasster Abbaubarkeit
Biologisch abbaubare Kunststoffe sind in umweltoffenen Anwendungen sinnvoll, bei denen ein Recyclingprozess nicht möglich oder mit einem zu hohen Aufwand verbunden ist. Beispiele hierfür sind Geotextilien oder Mulchfolien. Fraunhofer UMSICHT forscht an Kunststoffen mit angepasster Abbaubarkeit, die während der Nutzungsdauer die gewünschten Eigenschaften erfüllen. Zur Untersuchung und Bewertung der Eigenschaftsänderungen von Kunststoffen während der Alterung durch Umwelteinflüsse werden durch die Forschenden im Labor die Bedingungen so anwendungsnah wie möglich eingestellt. Dazu können je nach Produkt verschiedene Substrate (Kompost, Erde, Wasser), verschiedene Temperaturen und UV-Licht eingesetzt werden.
 
Förderhinweise

  • Das Projekt »InKa – Intermediate aus industriellem Kaffeesatz« wird im Rahmen der Fördermaßname »Nationalen Forschungsstrategie BioÖkonomie 2030« der Bundesregierung durch das Bundesministerium für Bildung und Forschung (BMBF) gefördert.
  • Das Projekt »DetekTPU« wird vom Bundesministerium für Wirtschaft und Energie aufgrund eines Beschlusses des Deutschen Bundestages gefördert.
  • Das Projekt »TechPLAstic« wird durch die Fachagentur Nachwachsende Rohrstoffe e. V. (FNR) und aus Mitteln des Bundesministeriums für Ernährung und Landwirtschaft (BMEL) gefördert.
Susan Gabler und Johannes Leis vom STFI bei Untersuchungen zum Recycling smarter Textilien. Foto: Sächsisches Textilforschungsinstitut e.V. (STFI)
Susan Gabler und Johannes Leis vom STFI bei Untersuchungen zum Recycling smarter Textilien.
20.09.2022

SmartERZ-Projekt zum Recycling von Smart Composites

Im Automobilbau, dem Schiffsbau und der Luftfahrtindustrie sowie bei Windenergieanlagen steigen die Materialanforderungen zusehends. Die verwendeten Werkstoffe sollen leicht, ressourcenschonend und gleichzeitig hochbelastbar sein. Faserverstärkte Kunststoffe (Composites) rücken immer mehr in den Vordergrund, da deren Eigenschaften in Kombination mit Glas- oder Carbonfasern metallischen Materialien oftmals überlegen sind. Mit Fokus auf die klimaneutrale Herstellung und Nutzung von Produkten wächst auch der Bedarf an Recyclinglösungen. Im SmartERZ-Projekt TRICYCLE arbeiten Unternehmen gemeinsam an geeigneten skalierbaren und wirtschaftlich tragfähigen Prozessen zum Recycling von Smart Composites. Momentan gibt es dafür keine Anbieter oder Konzepte am Markt.

Im Automobilbau, dem Schiffsbau und der Luftfahrtindustrie sowie bei Windenergieanlagen steigen die Materialanforderungen zusehends. Die verwendeten Werkstoffe sollen leicht, ressourcenschonend und gleichzeitig hochbelastbar sein. Faserverstärkte Kunststoffe (Composites) rücken immer mehr in den Vordergrund, da deren Eigenschaften in Kombination mit Glas- oder Carbonfasern metallischen Materialien oftmals überlegen sind. Mit Fokus auf die klimaneutrale Herstellung und Nutzung von Produkten wächst auch der Bedarf an Recyclinglösungen. Im SmartERZ-Projekt TRICYCLE arbeiten Unternehmen gemeinsam an geeigneten skalierbaren und wirtschaftlich tragfähigen Prozessen zum Recycling von Smart Composites. Momentan gibt es dafür keine Anbieter oder Konzepte am Markt.

Smart Composites bestehen aus Werkstoffen, deren Funktionalisierung durch die Integration oder Applikation elektrisch leitfähiger Komponenten, z. B. Sensoren oder Mikroprozessoren, erreicht wird. Dazu zählen zum Beispiel smarte Textilien, die elektronisch wärmen, Lichtsignale geben oder zur Datenübertragung genutzt werden können. Das breite Anwendungsspektrum und die vielseitigen Einsatzgebiete dieser intelligenten Verbundwerkstoffe und Multimaterialverbunde werden perspektivisch zu einem wachsenden Bedarf und einer stärkeren Nachfrage führen.

Die funktionale und vielschichtige Verbindung verschiedener Materialien wie Kunststoff, Metall und Textil wirft beim Thema Recycling Nachhaltigkeitsfragen auf. Im Erzgebirge werden dafür bereits heute Lösungen entwickelt. Im Rahmen des WIR!-Projektes SmartERZ ist das Verbundprojekt TRICYCLE entstanden. Mit dem Fokus auf den Strukturwandel im Erzgebirge haben sich acht ortsansässige Partner aus Wissenschaft und Wirtschaft zusammengetan, um ein Recyclingkonzept aufzustellen und die Grobplanung für ein erzgebirgisches Recycling Center zu entwickeln. Das Ende des Produktlebenszyklus und die Nachnutzung bzw. Wiederaufbereitung stehen dabei im Mittelpunkt des Entwicklungsprozesses. Im Ergebnis sollen effektive und maßgeschneiderte Maßnahmen für eine möglichst hochwertige Wiederverwendung entstehen. Diese sollen dem steigenden Aufkommen an Abfällen aus diesem wachsenden Bereich der deutschen Industrie begegnen und anwendungsbereit sein.

Klassische Herausforderungen für die Projektbeteiligten sind die irreversiblen Verbindungstechniken (z. B. Kleben, Faser-Matrix-Haftung), die Integration vieler verschiedener Materialien in geringen Mengen sowie Form und Größe der Bauteile. Eigene Untersuchungen sowie Feedback von Partnerunternehmen bestätigen die Notwendigkeit sowie den Nutzen eines passgenauen Recyclingprozesses für Smart Composites und intelligente Multimaterialverbünde. Das Projekt soll dazu beitragen, den Wirtschaftsstandort Erzgebirge attraktiver und zukunftsfähiger zu gestalten.

Am 1. September 2021 gestartet, kann TRICYCLE erste Ergebnisse vorweisen. Zunächst wurden die Bedarfe bei mittelständischen Unternehmen in der Region Erzgebirge abgefragt, um die aktuellen Gegebenheiten und den Status quo in Bezug auf technologische Recyclingkonzepte bestmöglich abzubilden. Für ein fundiertes Recyclingkonzept hat das TRICYCLE-Team drei Referenzbauteile für den vorgesehenen Prozess ermittelt, die in der erzgebirgischen Wirtschaft Verwendung finden, und folgenden Bereichen zugeordnet: Automotive, Technische Textilien mit applizierter Zusatzfunktion und Technische Textilien mit integrierter Zusatzfunktion.

Basierend auf dieser Auswahl, analysiert das Projektteam momentan die Herstellungs- und bisherigen Recyclingprozesse der Referenzbauteile. Das beinhaltet auch die Planung praktischer Versuche zum Recycling. Dabei fokussieren sich die Projektpartner auf ihr Know-how in verschiedenen chemischen, thermischen und mechanischen Prozessen zur Separierung, Rückführung und Wiederverwendung der eingesetzten Materialien. Um die Produkte den Recyclingtechnologien zugänglich zu machen, wurde die Herangehensweise innerhalb des Projekts angepasst, da insbesondere Textil aufgrund von Form und Struktur (z. B. endlose Struktur) herausfordernd sein kann.

Obwohl die Materialien selbst recycelbar sind, müssen diese dennoch für den Prozess optimal vorbereitet bzw. fachgerecht aufbereitet werden. Die Expertise und die Technologiekompetenz, die hierfür benötigt werden, ist bei den beteiligten Projektpartnern durch jahrzehntelange Erfahrung und zahlreiche Innovationen vorhanden. Das Zusammenspiel aller Beteiligten im Projekt TRICYCLE stellt bereits jetzt die Weichen für das geplante Recycling Center, um dieses später zum Drehkreuz zwischen regionalen Produktionsunternehmen und dem Recycling weiterzuentwickeln. Dieses soll als „Open Factory“ aufgebaut werden, um den Unternehmen des SmartERZ-Bündnisses bzw. perspektivisch der Region Erzgebirge eine gemeinsame Nutzung zu ermöglichen.

„Die Wiederverwendung der eingesetzten Ressourcen ist sowohl aus ökonomischer als auch aus ökologischer Sicht zwingend geboten. Momentan gibt es weder Anlagenbauer noch Dienstleistungsanbieter mit den entsprechenden Kompetenzen zum Recycling von Smart Composites oder Multimaterialverbünden am Markt,“ stellt Johannes Leis, der Verbundkoordinator vom Sächsischen Textilforschungsinstitut e.V. (STFI) in Chemnitz fest.Unter Leitung des STFI als Verbundkoordinator mit seiner über 30-jährigen Erfahrung in der Textilbranche und speziellem Know-how im Recycling von Carbonabfällen haben sich weitere Unternehmen und Forschungseinrichtungen zusammengefunden. Dazu zählen das Textilunternehmen Curt Bauer GmbH, die Professur Fabrikplanung und Fabrikbetrieb der TU Chemnitz, das Ingenieurbüro Matthias Weißflog, der Hersteller für Faserverbundbauteile Cotesa GmbH, der Spezialvlieshersteller Norafin Industries (Germany) GmbH, das Recyclingunternehmen Becker Umweltdienste GmbH und die Hörmann Rawema Engineering & Consulting GmbH. Am Ende der Projektlaufzeit sollen ein einsatzfähiges, technologisches Recyclingkonzept für die zukünftigen entstehenden smarten Produkte sowie die in der Produktion entstehenden Abfälle (bspw. durch fehlerhafte Bauteile und Randbeschnitte) und ein Konzept für den Aufbau eines Recycling Centers vorliegen, das im Erzgebirge entstehen soll.

13.09.2022

Heimtextil, Techtextil und Texprocess mit neuem Führungsteam

Die Textilmessen Heimtextil, Techtextil und Texprocess der Messe Frankfurt starten zukünftig unter neuer Leitung. Bettina Bär verantwortet ab dem 15. September 2022 die Leitung des Segments Heimtextilien der Heimtextil. Meike Kern ist in der Doppelspitze der internationalen Messe für Wohn- und Objekttextilien weiterhin für das Segment Haustextilien zuständig. Bettina Bär folgt auf Sabine Scharrer, die künftig die Position als Show Director der internationalen Leitmessen Techtextil und Texprocess und das Brandmanagement übernimmt. Sie folgt damit auf Michael Jänecke, der nach über 30 Jahren bei der Messe Frankfurt am 1. Januar 2023 in den Ruhestand geht. Seit 1992 leitete er die Techtextil, 2013 übernahm er zusätzlich die Funktion als Show Director der Texprocess.

Die Textilmessen Heimtextil, Techtextil und Texprocess der Messe Frankfurt starten zukünftig unter neuer Leitung. Bettina Bär verantwortet ab dem 15. September 2022 die Leitung des Segments Heimtextilien der Heimtextil. Meike Kern ist in der Doppelspitze der internationalen Messe für Wohn- und Objekttextilien weiterhin für das Segment Haustextilien zuständig. Bettina Bär folgt auf Sabine Scharrer, die künftig die Position als Show Director der internationalen Leitmessen Techtextil und Texprocess und das Brandmanagement übernimmt. Sie folgt damit auf Michael Jänecke, der nach über 30 Jahren bei der Messe Frankfurt am 1. Januar 2023 in den Ruhestand geht. Seit 1992 leitete er die Techtextil, 2013 übernahm er zusätzlich die Funktion als Show Director der Texprocess.

Die Leitmessen für technische Textilien und Vliesstoffe sowie für die Verarbeitung von textilen und flexiblen Materialien, Techtextil und Texprocess, stehen ab dem 1. Januar 2023 unter Leitung von Sabine Scharrer. Seit 1996 ist Sabine Scharrer bei der Messe Frankfurt und arbeitete unter anderem für die technischen Auslandsmessen des Unternehmens sowie als Leitung von Konsumgütermessen, darunter die Ambiente. In ihrer neuen Rolle als Leitung der Techtextil und Texprocess möchte sie die Leitmessen in Zusammenarbeit mit den Branchenpartnern weiter international ausbauen und dabei die weltweiten Synergien der Brandveranstaltungen der Messe Frankfurt im Bereich Technical Textiles und Textile Technology heben.

Bettina Bär übernimmt ab dem 15. September die Leitung des Segments Heimtextilien der Heimtextil. Bettina Bär ist seit 2012 bei der Messe Frankfurt. In dieser Zeit fungierte sie unter anderem als Show Director im Segment der Konsumgütermessen sowie zuletzt als Show Director der Neonyt; die Messe für Mode, Nachhaltigkeit und Innovationen. Zukünftig möchte sie die Heimtextil mit neuen Ideen voranbringen, relevante Marktsegmente, darunter der Bereich Interior, Architecture und Hospitality, stärken und nachhaltige Lösungen fördern.

 

Source:

Messe Frankfurt

13.09.2022

Wollfaserverbundwerkstoffe im Spritzguss und im 3-D-Druck

Prof. Dr. -Ing. Jörg Müssig und Vincent Röhl von der Hochschule Bremen trugen mit einem Kapitel über Wollfaserverbundwerkstoffe im Spritzguss und im 3-D-Druck zum Buch "Wool Fiber Reinforced Polymer Composites" bei.

Pflanzliche Naturfasern gewinnen als Verstärkungselemente in Verbundwerkstoffen zunehmend an Bedeutung. Wolle hingegen ist in derartigen Werkstoffen bisher eher selten zu finden, hat allerdings ein überaus spannendes Potenzial.

Das aktuell erschienene Buch zu wollfaserverstärkten Polymerverbundwerkstoffen stellt eine eingehende und praktische Analyse von Verbundwerkstoffen auf der Basis von Wolle dar und deckt alle Bereiche von der Morphologie der Wollfaser bis zu den industriellen Anwendungen von Wollfaserverbundwerkstoffen ab. Untersucht werden unterschiedlichste Formen von Wollfaserverbundwerkstoffen, Beschreibungen umfassen Morphologie, Struktur und Eigenschaften von Wolle, Methoden zur chemischen Modifizierung von Wolle, verschiedene Formen von Woll-Polymer-Verbundwerkstoffen und weitere neue Anwendungen.

Prof. Dr. -Ing. Jörg Müssig und Vincent Röhl von der Hochschule Bremen trugen mit einem Kapitel über Wollfaserverbundwerkstoffe im Spritzguss und im 3-D-Druck zum Buch "Wool Fiber Reinforced Polymer Composites" bei.

Pflanzliche Naturfasern gewinnen als Verstärkungselemente in Verbundwerkstoffen zunehmend an Bedeutung. Wolle hingegen ist in derartigen Werkstoffen bisher eher selten zu finden, hat allerdings ein überaus spannendes Potenzial.

Das aktuell erschienene Buch zu wollfaserverstärkten Polymerverbundwerkstoffen stellt eine eingehende und praktische Analyse von Verbundwerkstoffen auf der Basis von Wolle dar und deckt alle Bereiche von der Morphologie der Wollfaser bis zu den industriellen Anwendungen von Wollfaserverbundwerkstoffen ab. Untersucht werden unterschiedlichste Formen von Wollfaserverbundwerkstoffen, Beschreibungen umfassen Morphologie, Struktur und Eigenschaften von Wolle, Methoden zur chemischen Modifizierung von Wolle, verschiedene Formen von Woll-Polymer-Verbundwerkstoffen und weitere neue Anwendungen.

Unter dem Titel „Wool fiber-reinforced thermoplastic polymers for injection molding and 3D-printing“ bekommen die Leser:innen einen Überblick vom Aufbau natürlicher keratin-basierter Strukturen, deren Eigenschaften bis hin zur Verwendung von Wolle in Verbundwerkstoffen. Neben Anwendungsmöglichkeiten im 3-D-Druck gehen die Autoren auch auf das bionische Potenzial keratin-basierter Strukturen ein. Vor dem Hintergrund der Diskussionen über den unerwünschten Eintrag von Kunststoffen in Gewässer und Böden sehen Vincent Röhl und Jörg Müssig einen besonderen Vorteil von Wollfasern zur Verstärkung von abbaubaren Kunststoffen. Ihre aktuellen Forschungen zeigen, dass wollfaserverstärkte, biobasierte Kunststoffe sich sehr schnell im Boden abbauen und von Bodenorganismen verstoffwechselt werden können.

Source:

Hochschule Bremen

08.09.2022

Monforts at ITMA ASIA + CITME

Monforts will highlight its technologies for special technical textile applications at this year’s ITMA ASIA + CITME which takes place at the National Exhibition and Convention Center in Shanghai, China, from November 20-24.

One of Monforts' developments is the Montex 8500 XXL stenter system for the production of technical fabrics in widths of up to 6.8 metres. Among the products made on this system are treated nonwovens for the geotextiles and filter media markets, tarpaulins, advertising banners, black-out curtains, membranes and many more.

On Montex©Coat coating lines, meanwhile, the possibilities range from the single-sided application of finishing agents for outdoor clothing and adding functionality to home textiles, to the creation of materials for sophisticated lightweight construction and automotive and aerospace components.

Monforts will highlight its technologies for special technical textile applications at this year’s ITMA ASIA + CITME which takes place at the National Exhibition and Convention Center in Shanghai, China, from November 20-24.

One of Monforts' developments is the Montex 8500 XXL stenter system for the production of technical fabrics in widths of up to 6.8 metres. Among the products made on this system are treated nonwovens for the geotextiles and filter media markets, tarpaulins, advertising banners, black-out curtains, membranes and many more.

On Montex©Coat coating lines, meanwhile, the possibilities range from the single-sided application of finishing agents for outdoor clothing and adding functionality to home textiles, to the creation of materials for sophisticated lightweight construction and automotive and aerospace components.

“Many more applications are possible, such as the overdyeing of denim, the creation of double-face coated materials, fabrics awnings, tents and medical drapes and the pre-treatment of substrates for digital printing”, explains Gunnar Meyer, Monforts area sales manager for China. “A range of different doctor blades and their combinations can be supplied to meet individual requirements, including air knife, roller knife, foam, screen and magnetic roller coating. The latter option is recommended for lines with working widths of over 2.4 metres.”

In addition, Monforts can provide the necessary explosion-proof ranges for solvent-based coatings and high temperature processes up to 320°C, such as the PTFE coating of nonwoven filter material. These lines are equipped with special burners, stenter chains, and insulation.

Source:

 A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

(c) PURE LOOP
07.09.2022

PURE LOOP: High-strength synthetic nonwoven made with a recycled content of 10 percent

Geosynthetics have become an indispensable part of the construction industry. PP nonwovens, for example - mechanically bonded continuous fibres made from specially UV-stabilised polypropylenes - are often used in blanket form as barriers, screens and filters, and their strength extends the service life of construction projects. Whether for road construction, or as barrier on glaciers or against weeds - there are myriad applications.

TenCate Geosynthetics uses the PURE LOOP ISEC evo technology to recycle this type of PP nonwoven. The European company, with locations in Austria, France and the Netherlands, is specialised in the development and production of geotextiles for modern civil engineering applications. The edge trimmings and production rejects generated during manufacturing used to be recycled at the Linz site, but not fed back into the company's own production process.

Geosynthetics have become an indispensable part of the construction industry. PP nonwovens, for example - mechanically bonded continuous fibres made from specially UV-stabilised polypropylenes - are often used in blanket form as barriers, screens and filters, and their strength extends the service life of construction projects. Whether for road construction, or as barrier on glaciers or against weeds - there are myriad applications.

TenCate Geosynthetics uses the PURE LOOP ISEC evo technology to recycle this type of PP nonwoven. The European company, with locations in Austria, France and the Netherlands, is specialised in the development and production of geotextiles for modern civil engineering applications. The edge trimmings and production rejects generated during manufacturing used to be recycled at the Linz site, but not fed back into the company's own production process.

"The demands on us were high," recalls Patrick Wiesinger, project manager at PURE LOOP. "The PP nonwoven is highly tear resistant, which means its a very challenging recycling process. Our ISEC evo machine conserves the quality of the production waste really well during recycling, so we were able to achieve the specified increase in quality for the recyclates."

Another advantage of PURE LOOP technology is the wide range of shapes in which the production scrap can be delivered for processing. "Our ifeed technology with double feed ram system and singleshaft shredder offers the ideal conditions for direct processing of these large rolls - and without the need for prior preparation of the input material by employees before the material is fed into the recycling process", emphasizes Patrick Wiesinger. With the ISEC evo recycling machine TenCate can now manufacture its high-strength PP nonwoven product with a recyclate content of up to 10 percent.

Source:

PURE LOOP, EREMA Group GmbH

(c) deepak@deepakdavda.com
06.09.2022

Techtextil India to take place in September 2023

Messe Frankfurt India has announced that the ninth edition of Techtextil India will be held from 12 – 14 September 2023, for the first time at JIO World Convention Centre (JWCC), Mumbai. On the side-lines of the three-day fair, the organisers are planning a series of live sessions to spark debates on important industry topics and high-growth application areas.
 
As the leading business event for the Indian technical textile industry, Techtextil India, aims to connect international and domestic players with buyers from 12+ segments under diverse application areas and create a one-stop sourcing platform to highlight latest product innovations in technical textiles.
 

Messe Frankfurt India has announced that the ninth edition of Techtextil India will be held from 12 – 14 September 2023, for the first time at JIO World Convention Centre (JWCC), Mumbai. On the side-lines of the three-day fair, the organisers are planning a series of live sessions to spark debates on important industry topics and high-growth application areas.
 
As the leading business event for the Indian technical textile industry, Techtextil India, aims to connect international and domestic players with buyers from 12+ segments under diverse application areas and create a one-stop sourcing platform to highlight latest product innovations in technical textiles.
 
Marking a spectacular comeback after the lockdown, the eighth edition of Techtextil India in  2021 stood out to be a ground-breaking business platform for the technical textile sector with live demonstrations from over 150 companies’ brands and an exclusive German pavilion. The high-profile event, over the course of three days attracted 4,087 trade visitors from 25 states and 194 cities. Mr Pramod Khosla, Director, Khosla Profil Pvt Ltd, shared: “Despite the unprecedented situation created by pandemic, Techtextil India 2021 saw a tremendous response from visitors. This goes to show the immense interest and trust that industries and people have in the technical textiles sector as well as in Techtextil India.”
 
For the upcoming ninth edition, leading Indian players such as Alok Masterbatches, Khosla Profil, Park Nonwoven, Sarex Chemicals, Suntech Geo, Weavetech have already confirmed their participation and will be showcasing innovations in high-growth application areas of Geotech, Packtech, Agrotech & Indutech with a focus on products such as specialty fibres, filtration fabrics, functional textiles & advance technology.
 
While Mobiltech, Indutech, Meditech, Packtech and Sportech constitute a major share value in the global market for technical textiles, the segments likely to grow at the fastest rates (at rates faster than a CAGR of 10%) in the Indian market are Oekotech, Protech, Mobiltech, Geotech, Indutech, Agrotech, Buildtech and Packtech. The government’s target to accelerate technical textile sector growth from 8% to 15-20% range in the next five years and transform the nation into a major player in innovations, technology development, applications in key areas (agriculture, roads and railways, water resources, hygiene and healthcare, personal protection) is giving strong impetus to industry players.

With an aim to place India as one of the leaders in the global technical textile market and enhance its adoption and penetration domestically, the Indian government has earmarked INR 1000 crore (USD 130.7 million) dedicated only for R&D of the Technical Textiles sector, while the Union Budget 2022-23 further allocates INR 100 crore (USD 13.07 million) for the National Technical Textiles Mission. The centre is making strong efforts to encourage the use and adoption of technical textiles and has mandated the use of 92 items by government organisations covering agriculture, horticulture, highways, railways, water resources, and medical applications. The organisers are in talks with international technology players targeting these application areas to present their innovations at the three-day fair.

Source:

Messe Frankfurt (HK) Limited

06.09.2022

SGL Carbon increases sales and earnings guidance again for 2022

Due to the continued good business development, especially in the Carbon Fibers Business Unit, SGL Carbon SE is increasing its Group sales and earnings guidance for the current fiscal year and now expects Group sales of approximately €1.2 billion (previously: approximately €1.1 billion). The company expects to achieve adjusted EBITDA (EBITDA pre = earnings before interest, taxes, depreciation and amortization before one-off effects and non-recurring items) of €170 - €190 million (previously: €130 - €150 million) in 2022.

Based on lower prices for acrylonitrile as main raw material of the Business Unit Carbon Fibers as well as higher than expected customer demand for acrylic and carbon fibers combined with consistently good production capacity utilization and capability, the management of SGL Carbon SE assumes an improved earnings development of this Business Unit.

Due to the continued good business development, especially in the Carbon Fibers Business Unit, SGL Carbon SE is increasing its Group sales and earnings guidance for the current fiscal year and now expects Group sales of approximately €1.2 billion (previously: approximately €1.1 billion). The company expects to achieve adjusted EBITDA (EBITDA pre = earnings before interest, taxes, depreciation and amortization before one-off effects and non-recurring items) of €170 - €190 million (previously: €130 - €150 million) in 2022.

Based on lower prices for acrylonitrile as main raw material of the Business Unit Carbon Fibers as well as higher than expected customer demand for acrylic and carbon fibers combined with consistently good production capacity utilization and capability, the management of SGL Carbon SE assumes an improved earnings development of this Business Unit.

SGL Carbon assumes that the factors mentioned will continue at least until the end of the year and that the earnings situation of the Business Unit Carbon Fibers will exceed previous expectations. Combined with the continued good business development of the other three Business Units (Graphite Solutions, Process Technology and Composite Solutions), an improvement in the sales and earnings situation at Group level is expected.

In line with the forecast increase for adjusted EBITDA (EBITDA pre) to between €170 and €190 million (previously: €130 - €150 million), the company is forecasting adjusted EBIT (earnings before interest and taxes and before one-off effects and non-recurring items) of between €110 and €130 million (previously: €70 - €90 million). The forecast for return on capital employed (ROCE) of originally 7% - 9% has been raised to 10% to 12% corresponding to the development of earnings. The expectations for free cash flow (significantly below previous year's level of €111.5 million) remain unaffected by the expected improvement in sales and earnings.

The updated forecast for fiscal 2022 has been prepared on the basis of the currently prevailing market environment and assumes no deterioration in the general conditions, in particular due to the war in Ukraine and its consequences for the global economy.
 
The definition of key figures used in this release is aligned to the Annual Report 2021. There were no changes in the scope of consolidation or accounting methods compared with the previous guidance.

Source:

SGL CARBON SE

31.08.2022

DNFI Award 2022 – Deadline 9 Sept

As every year, in 2022 the Discover Natural Fibers Initiative (DNFI) called on individuals, universities, textile researchers and companies to submit their products, projects, processes and ideas in the field of Natural Fibres from the following categories:

  • Innovative products, components or applications
  • Innovative processes and procedures
  • Innovative research and science

The DNFI Innovation in Natural Fibres Award aims to promote the development of new products/components and applications using natural fibres as well as new processes for manufacturing of environmental friendly products. Universities, institutes, industry and individuals working in the area of scientific research are invited to participate. “Sustainability” should be just one important aspect of each submission considered by the judges.

The DNFI Innovation in Natural Fibres Award aims to recognise the innovations as well as the people and institutions responsible for them with the goal of raising public awareness of the achievements of the natural fibre sector as a whole.

As every year, in 2022 the Discover Natural Fibers Initiative (DNFI) called on individuals, universities, textile researchers and companies to submit their products, projects, processes and ideas in the field of Natural Fibres from the following categories:

  • Innovative products, components or applications
  • Innovative processes and procedures
  • Innovative research and science

The DNFI Innovation in Natural Fibres Award aims to promote the development of new products/components and applications using natural fibres as well as new processes for manufacturing of environmental friendly products. Universities, institutes, industry and individuals working in the area of scientific research are invited to participate. “Sustainability” should be just one important aspect of each submission considered by the judges.

The DNFI Innovation in Natural Fibres Award aims to recognise the innovations as well as the people and institutions responsible for them with the goal of raising public awareness of the achievements of the natural fibre sector as a whole.

Get the details online.

More information:
DNFI DNFI award
Source:

European Industry and Research Exchange on Technical Textiles

(c) Allmann Sattler Wappner Architekten, München; Menges Scheffler Architekten, Frankfurt; Jan Knippers Ingenieure, Stuttgart
31.08.2022

Neues Ausbildungsjahr für Textil- und Bekleidungsberufe startet

Ein Garn zu spinnen, ein Gewebe oder Gestrick zu produzieren, anschließend zu veredeln und zu einem fertigen Textil mit breiten Anwendungsfeldern zu konfektionieren, benötigt viel Know-how. Passend dazu bieten Textil- und Bekleidungsunternehmen Ausbildungsberufe an, deren Anwendungsfelder ganz nach dem Motto „Textil kann viel“ nicht vielfältiger sein könnten. Produktionsmechaniker*innen Textil können ihr Geschick im Umgang mit Maschinen unter Beweis stellen; Produktveredler*innen Textil sind direkt in das Veredeln und Färben eingebunden; Textil- und Modeschneider*innen verwandeln Stoffe in Kleidungsstücke und andere Produkte. Auch Ausbildungen im kaufmännischen Bereich, in Logistik oder IT hat die Industrie zu bieten.

Ein Garn zu spinnen, ein Gewebe oder Gestrick zu produzieren, anschließend zu veredeln und zu einem fertigen Textil mit breiten Anwendungsfeldern zu konfektionieren, benötigt viel Know-how. Passend dazu bieten Textil- und Bekleidungsunternehmen Ausbildungsberufe an, deren Anwendungsfelder ganz nach dem Motto „Textil kann viel“ nicht vielfältiger sein könnten. Produktionsmechaniker*innen Textil können ihr Geschick im Umgang mit Maschinen unter Beweis stellen; Produktveredler*innen Textil sind direkt in das Veredeln und Färben eingebunden; Textil- und Modeschneider*innen verwandeln Stoffe in Kleidungsstücke und andere Produkte. Auch Ausbildungen im kaufmännischen Bereich, in Logistik oder IT hat die Industrie zu bieten.

„Wir möchten noch mehr junge Menschen für eine Ausbildung in unserer spannenden und innovativen Branche begeistern. Deshalb investiert Südwesttextil mit dem Bau des Texoversums auf dem Campus der Hochschule Reutlingen in die Zukunft der Ausbildung. Das Texoversum ist einer der Orte, an dem die textile Aus- und Weiterbildung ihre Innovation und Attraktivität aufzeigt und vorantreibt“, so Edina Brenner, Hauptgeschäftsführerin des Wirtschafts- und Arbeitgeberver-bands Südwesttextil.

In den Nachwuchs zu investieren hat beim Verband der Südwestdeutschen Textil- und Bekleidungsindustrie e.V. Südwesttextil Tradition: Seit 1980 sind in der Gatex, der überbetrieblichen Aus- und Weiterbildungsstätte der Branche, mehr als 1.000 Menschen erfolgreich qualifiziert worden. Auszubildenden ermöglicht die Gatex das Lernen entlang der textilen Kette, sodass sie im Anschluss im Betrieb auch vor- oder nachgelagerte Stufen der Produktion mitdenken können.
 
Mit dem Umzug der Gatex von Bad Säckingen nach Reutlingen setzt Südwesttextil auf einen zentralen Ort und die Verknüpfung mit dem Studienangebot der Hochschule. Schon jetzt schnuppern die Auszubildenden Campusluft, denn das überbetriebliche Ausbildungsjahr beginnt direkt in Reutlingen. Das Texoversum wird im Frühsommer des nächsten Jahres eröffnet und bietet dem textilen Nachwuchs Raum fürs Lernen, Ausprobieren und Vernetzen. Denn in den 3.000 Quadratmetern des innovativ gebauten Gebäudes befinden sich neben Schulungsräumen auch Werkstätten, Labore und Think-Tank-Flächen.

(c) Freudenberg
25.08.2022

Freudenberg at Fachpack 2022

Freudenberg Performance Materials (Freudenberg) is presenting its sustainable Evolon® product range for reusable technical packaging for highly-sensitive parts at Fachpack 2022 in Nuremberg, Germany from September 27-29. The microfilament textiles offer improved surface protection for molded plastic parts, painted parts and so-called class A parts, thus providing customers with significant savings potential.

Evolon® RE is the most sustainable product in the portfolio. It contains the highest percentage of recycled PET and has a smaller carbon footprint. The new Ultra Force range from Evolon® offers extremely high mechanical strength and eliminates the need for PVC in the transportation and protection of large, heavy parts. Freudenberg has developed the ESD range (electro-static discharge range) for the packaging of sensitive electronic components: it offers permanent electro-static discharging and its surface resistivity can be customized.

Freudenberg Performance Materials (Freudenberg) is presenting its sustainable Evolon® product range for reusable technical packaging for highly-sensitive parts at Fachpack 2022 in Nuremberg, Germany from September 27-29. The microfilament textiles offer improved surface protection for molded plastic parts, painted parts and so-called class A parts, thus providing customers with significant savings potential.

Evolon® RE is the most sustainable product in the portfolio. It contains the highest percentage of recycled PET and has a smaller carbon footprint. The new Ultra Force range from Evolon® offers extremely high mechanical strength and eliminates the need for PVC in the transportation and protection of large, heavy parts. Freudenberg has developed the ESD range (electro-static discharge range) for the packaging of sensitive electronic components: it offers permanent electro-static discharging and its surface resistivity can be customized.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

Beaulieu International Group
23.08.2022

BIG at EuroGeo7 with geotextile fibres & woven fabrics

Beaulieu International Group invites EuroGeo7 attendees to discover geotextile solutions promoting greater sustainability for future civil engineering projects. Specialists from Beaulieu Fibres International (BFI) and Beaulieu Technical Textiles (BTT) will present high-performance geosynthetics through high tenacity fibres for lightweight, nonwoven geotextiles, and a range of high durability woven geotextile solutions with an environmentally beneficial impact.

Beaulieu International Group invites EuroGeo7 attendees to discover geotextile solutions promoting greater sustainability for future civil engineering projects. Specialists from Beaulieu Fibres International (BFI) and Beaulieu Technical Textiles (BTT) will present high-performance geosynthetics through high tenacity fibres for lightweight, nonwoven geotextiles, and a range of high durability woven geotextile solutions with an environmentally beneficial impact.

“We are delighted to sponsor EuroGeo7 and to be finally on-site, following a two-year postponement of the event. EuroGeo7 is bringing the geotextile community together to further promote and develop geosynthetics in a fast changing global economy striving for growth while reducing its carbon footprint along the supply chain, " comment from Jefrem Jennard, Sales Director Fibres, and Roy Kerckhove, Sales Director Technical Textiles. “Geotextiles provide highly versatile, durable and natural resource-saving alternatives in large infrastructure works, and offer durable protection in erosion control and waste/water management projects. We are continuously developing our fibres and finished engineering textiles with proven sustainability-enhancing benefits to progress product development and customer sustainability goals on fossil carbon reduction, while taking concrete steps to reduce our own environmental footprint.”
 
Sustainability improvement is key to the long-term strategy of Beaulieu International Group, and it is committed to supporting the geotextile industry by targeting and accelerating change and communicating the sustainable performance of its products. The UN Sustainable Development Goals are integrated into its business and are the foundations of the new Route 2030 Sustainability Roadmap.


For manufacturers of nonwoven geotextiles, BFI’s high-tenacity HT8 staple fibres enable customers to achieve nonwovens with high mechanical performance at reduced fibre weight. The HT8 high tenacity fibres are designed in a way that customers can meet the industry durability standards for a longer service lifetime, supporting more sustainable design and resource reduction over time. BTT’s woven geotextiles are amongst the most sustainable in the industry and provide a wide range of functions, including separation, filtration, reinforcement and erosion control.

BFI and BTT have conducted lifecycle assessments to calculate their activities' carbon footprint and solutions and have received external recognition for their ongoing sustainability efforts. For example, in 2022, BFI was awarded a Silver EcoVadis sustainability rating, and BFI and BTT are proud recipients of the Voka Charter for Sustainable Entrepreneurship 2022.

Source:

Beaulieu International Group

Photo: Bogner
11.08.2022

BOGNER Golf Collection Fall/Winter 2022

The BOGNER Golf collection combines an active lifestyle with luxurious comfort and a hint of glamour. Highly functional essentials are the best equipment for long days on the golf course: a waterproof finish and taped seams offer protection from the rain; high-performance Thermore® insulation gives mid-layers moisture-regulating, quick-drying and warming qualities; Powerstretch guarantees freedom of movement, and the lightweight quality of tech jersey ensures the best in comfort.

Each BOGNER golf collection is used to layer styles individually to create the perfect golf outfit according to the needs and regardless of the season. The selection of pants, polos, skirts, jackets and accessories combine sporty appeal and timeless style. Modern contrast stripes, monochrome elegance, neutral colors and sporty silhouettes – true to the motto Athluxury Sports Fashion.

The BOGNER Golf collection combines an active lifestyle with luxurious comfort and a hint of glamour. Highly functional essentials are the best equipment for long days on the golf course: a waterproof finish and taped seams offer protection from the rain; high-performance Thermore® insulation gives mid-layers moisture-regulating, quick-drying and warming qualities; Powerstretch guarantees freedom of movement, and the lightweight quality of tech jersey ensures the best in comfort.

Each BOGNER golf collection is used to layer styles individually to create the perfect golf outfit according to the needs and regardless of the season. The selection of pants, polos, skirts, jackets and accessories combine sporty appeal and timeless style. Modern contrast stripes, monochrome elegance, neutral colors and sporty silhouettes – true to the motto Athluxury Sports Fashion.

Source:

Willy Bogner GmbH & Co. KGaA

Foto: Freudenberg Performance Materials
11.08.2022

Freudenberg Friction Inserts at WindEnergy Hamburg 2022

Freudenberg Performance Materials is introducing Freudenberg Friction Inserts to trade visitors at WindEnergy, the leading trade fair for the international wind energy industry. Freudenberg Friction Inserts is a unique technology aimed at increasing the power density of wind turbines.

The Freudenberg Friction Inserts (FFI) technology is based on a special very thin nonwoven carrier material coated on one side with hard particles. The FFI are customized to fit each application, in terms of both the geometry and the construction parameters of the connection. As they do not create a gap they can be applied exactly where they are needed.

When placed in the joint, these hard particles penetrate into the surfaces of the two joining parts creating a micro interlock, thus reliably increasing the friction coefficient and achieving higher torque transmission in connections. This results in higher performance and a significant improvement in the efficiency of wind turbines. In addition, it enables the downsizing of components without compromising performance, reducing weight and material.

Freudenberg Performance Materials is introducing Freudenberg Friction Inserts to trade visitors at WindEnergy, the leading trade fair for the international wind energy industry. Freudenberg Friction Inserts is a unique technology aimed at increasing the power density of wind turbines.

The Freudenberg Friction Inserts (FFI) technology is based on a special very thin nonwoven carrier material coated on one side with hard particles. The FFI are customized to fit each application, in terms of both the geometry and the construction parameters of the connection. As they do not create a gap they can be applied exactly where they are needed.

When placed in the joint, these hard particles penetrate into the surfaces of the two joining parts creating a micro interlock, thus reliably increasing the friction coefficient and achieving higher torque transmission in connections. This results in higher performance and a significant improvement in the efficiency of wind turbines. In addition, it enables the downsizing of components without compromising performance, reducing weight and material.

FFI help to improve the reliability of connections and thus of the entire wind turbine. Furthermore, they eliminate slipping and prevent fretting of connections.

Other examples of applications for FFI are highly loaded flange connections between the rotor shaft and gearbox, connections between the main bearing and the machine carrier housing, the gearbox to generator, or at the pitch gear or ring gear. They increase the friction co-efficient between two components.

Source:

Freudenberg Performance Materials