From the Sector

Reset
130 results
Ascend Performance Materials, APMPR063 ©Ascend Performance Materials
SARS-CoV-2, Influenza A inactivated by zinc-embedded nylon fabric.
22.09.2021

SARS-CoV-2, Influenza A inactivated by zinc-embedded nylon fabric

  • A paper published in ACS Applied Materials Interfaces details effectiveness, describes protocol for future testing

An international team of scientists and engineers from the University of Cambridge, the Icahn School of Medicine at Mount Sinai, ResInnova Labs and Ascend Performance Materials has found that a nylon fabric embedded with zinc ions successfully inactivated 99% of the viruses that cause COVID-19 and the common flu.

Face masks, protective clothing and filters are used to slow the spread of viruses. But poor-quality masks can harbor active viruses from infected wearers, posing a transmission risk.

“A major challenge is absorption and inactivation,” said Vikram Gopal, Ph.D., co-senior author and chief technology officer at Ascend Performance Materials. “Respiratory viral illnesses, such as COVID-19, and the flu, are transmitted through droplets and aerosols. Polypropylene, the material in commonly used disposable masks, is a hydrophobic plastic and does not absorb moisture. Instead, the viruses can sit on the surface of the mask, posing a transmission risk when the mask is handled.”

  • A paper published in ACS Applied Materials Interfaces details effectiveness, describes protocol for future testing

An international team of scientists and engineers from the University of Cambridge, the Icahn School of Medicine at Mount Sinai, ResInnova Labs and Ascend Performance Materials has found that a nylon fabric embedded with zinc ions successfully inactivated 99% of the viruses that cause COVID-19 and the common flu.

Face masks, protective clothing and filters are used to slow the spread of viruses. But poor-quality masks can harbor active viruses from infected wearers, posing a transmission risk.

“A major challenge is absorption and inactivation,” said Vikram Gopal, Ph.D., co-senior author and chief technology officer at Ascend Performance Materials. “Respiratory viral illnesses, such as COVID-19, and the flu, are transmitted through droplets and aerosols. Polypropylene, the material in commonly used disposable masks, is a hydrophobic plastic and does not absorb moisture. Instead, the viruses can sit on the surface of the mask, posing a transmission risk when the mask is handled.”

Cotton also has problems, Dr. Gopal said. “Cotton effectively absorbs moisture, but it doesn’t inactivate the virus – again, posing a transmission risk,” he said. In the paper published in ACS Applied Materials Interfaces, the researchers described how a fabric made of nylon 6,6 embedded with active zinc ions absorbed virus-containing moisture droplets and effectively inactivated the particles. The fabric produced a 2-log, or 99%, reduction of virus particles in one hour.

The research team also was able to demonstrate that nylon with active zinc ions remains stable over time, keeping its virus-inactivating properties after 50 washes. “The study shows how nylon textile fabric with zinc outperforms the widely used cotton and polypropylene materials at virus absorption and inactivation,” Dr. Gopal said. The findings have significant implications for future development of PPE, Dr. Gopal said. “Pathogen-free PPE does more than just cut down the risk of transmitting the virus,” Gopal said. “By making PPE washable and reusable, you reduce the need for single-use products, keeping hundreds of millions of masks out of landfills.”

16.09.2021

Finavia: Antibacterial Coating Solution at Airport

Airport company Finavia will start using Finnish technology company Nanoksi Finland Oy’s coating solution at Helsinki Airport. The coating can be used to remove viruses and bacteria from airport surfaces and furniture.

“We are continuously keeping track of new methods and products to ensure a high level of hygiene at the airport. This nanotechnology-based coating, which is sprayed on contact surfaces and furniture, makes it easier to keep surfaces clean. The coating destroys pathogens with the help of light and air,” says Sami Kiiskinen, Finavia’s Vice President, Airport Development for Helsinki Airport.

The coating is sprayed on targets such as check-in counters, machines, departure gates and toilet facilities. The coating lasts for a long time, even though the furniture is wiped several times a day.

Airport company Finavia will start using Finnish technology company Nanoksi Finland Oy’s coating solution at Helsinki Airport. The coating can be used to remove viruses and bacteria from airport surfaces and furniture.

“We are continuously keeping track of new methods and products to ensure a high level of hygiene at the airport. This nanotechnology-based coating, which is sprayed on contact surfaces and furniture, makes it easier to keep surfaces clean. The coating destroys pathogens with the help of light and air,” says Sami Kiiskinen, Finavia’s Vice President, Airport Development for Helsinki Airport.

The coating is sprayed on targets such as check-in counters, machines, departure gates and toilet facilities. The coating lasts for a long time, even though the furniture is wiped several times a day.

The effectiveness of the Fotonit® photocatalytic coating developed by Finnish nanotechnology company Nanoksi Finland Oy has been confirmed by research at the University of Tampere. Photocatalysis can destroy 98% of pathogens such as influenza viruses in two hours. The coating has been awarded the Key Flag Symbol as an indication of its high domestic content.

(c) FET
FET meltspinning system for biomedical applications
15.09.2021

FET: Further Gains in the Biomedical sector

Fibre Extrusion Technology of Leeds, UK has delivered nine meltspinning systems to clients in the biomedical sector since the onset of the Covid-19 pandemic, with a similar number currently on order for 2021/22. This way FET could confirm the position as an acknowledged world leader in meltspinning equipment for the production of precursor materials used in medical devices and as a default supplier for absorbable suture production systems, with orders virtually doubling year on year.

Recent installations include a multi-functional system that can produce both multifilament and monofilament pre-cursor fibres, but nonwoven systems have been particularly prominent, driven by the burgeoning demand for FFP3 masks, gowns and other medical products required during the pandemic. These have been sold to medical device manufacturing companies across the globe, including the Far East, USA and Europe. Research organisations have also invested in FET systems for biomedical applications, the most recent being the University of Leeds in a laboratory scale Spunbond system.

Fibre Extrusion Technology of Leeds, UK has delivered nine meltspinning systems to clients in the biomedical sector since the onset of the Covid-19 pandemic, with a similar number currently on order for 2021/22. This way FET could confirm the position as an acknowledged world leader in meltspinning equipment for the production of precursor materials used in medical devices and as a default supplier for absorbable suture production systems, with orders virtually doubling year on year.

Recent installations include a multi-functional system that can produce both multifilament and monofilament pre-cursor fibres, but nonwoven systems have been particularly prominent, driven by the burgeoning demand for FFP3 masks, gowns and other medical products required during the pandemic. These have been sold to medical device manufacturing companies across the globe, including the Far East, USA and Europe. Research organisations have also invested in FET systems for biomedical applications, the most recent being the University of Leeds in a laboratory scale Spunbond system.

The FET in-house Process Development Laboratory and ongoing collaboration with biomaterial polymer suppliers has helped to optimise the biomedical melt spinning technology. The Laboratory is at the disposal of customers for all aspects of confidential testing and evaluation. To further increase this competitive edge, FET will be opening a new Process Development Laboratory and Visitor Centre in early 2022.

More information:
meltspinning FET
Source:

Projectmarketing for FET

09.09.2021

Texcare International will not take place in 2021

  • Leading suppliers of textile-care technology cancel their participation

Leading suppliers of laundry and dry-cleaning technology have used the free cancellation deadline offered by Messe Frankfurt against the background of the pandemic and cancelled their participation in Texcare International 2021 shortly before expiry. In view of this the Advisory Council of the world’s leading textile-care fair have voted to cancel Texcare International for this year because its success can no longer be guaranteed.

  • Leading suppliers of textile-care technology cancel their participation

Leading suppliers of laundry and dry-cleaning technology have used the free cancellation deadline offered by Messe Frankfurt against the background of the pandemic and cancelled their participation in Texcare International 2021 shortly before expiry. In view of this the Advisory Council of the world’s leading textile-care fair have voted to cancel Texcare International for this year because its success can no longer be guaranteed.

In view of the corona crisis earlier this year, Messe Frankfurt offered exhibitors of Texcare International the right to cancel their participation free of charge until 3 September 2021. As the months passed, the overall outlook became increasingly positive and, by the beginning of August, around 200 companies – including the important and big manufacturers from all parts of the textile-care sector – had registered to exhibit at Texcare International in Frankfurt am Main from 27 November to 1 December 2021. Factors contributing to this included the growing pace of vaccination around the world, the categorisation of trade fairs as business events and the officially approved protection and hygiene concept of Messe Frankfurt. Nevertheless, the mood changed shortly before the cancellation deadline as leading companies decided to withdraw from the event because of uncertainties regarding the future development of the pandemic.

Kerstin Horaczek, Vice President Technology Shows at Messe Frankfurt, took stock after the deadline: “Together with our partners, we worked untiringly to stage the Texcare International for the textile-care sector in the autumn. However, a leading international trade fair with a significantly reduced spectrum on show would not do justice to participants’ expectations of the fair as the most important meeting place and innovation hub for the sector. Therefore, we have decided to accept the vote of the Advisory Council and cancel Texcare International 2021. We are extremely sorry about this. At the same time, we are grateful for the on-going, high level of commitment demonstrated by the sector for their most important trade fair.”

Source:

Messe Frankfurt Exhibition GmbH

08.09.2021

Indorama Mobility Group: General price increase effective October 1st 2021

The Indorama Mobility Group, a manufacturer of industrial fibers, cords and fabrics, - like other companies - is confronted with significant inflation since the beginning of the year. The global economy has gradually recovered in 2021 from the impact of the COVID-19 pandemic, but is still experiencing very volatile market conditions: The global freight remains unreliable and expensive, cost for energy and global commodities is increasing, and the increasing focus on sustainability and environmental impact is driving compliance cost upward in most part of the world.

In detail:

The Indorama Mobility Group, a manufacturer of industrial fibers, cords and fabrics, - like other companies - is confronted with significant inflation since the beginning of the year. The global economy has gradually recovered in 2021 from the impact of the COVID-19 pandemic, but is still experiencing very volatile market conditions: The global freight remains unreliable and expensive, cost for energy and global commodities is increasing, and the increasing focus on sustainability and environmental impact is driving compliance cost upward in most part of the world.

In detail:

  • Utilities: gas price has tripled in the past few months in Europe (from a level of 15 EUR/MWh in Q4’20 to 45 EUR/MWh recently), while increasing by 50% in USA
  • CO2 emissions and compliance cost: prices for CO2 certificates in Europe have almost doubled, approaching 60 EUR/ton from 30 EUR/ton at the end of last year, while regulations continue to expand the need for CO2 compensation
  • Chemicals and additives (spinfinish, dip chemicals, coating & laminating chemicals): cost have increased by 5%
  • Packaging: prices for standard packaging materials have increased by more than 30%
  • Logistic: despite our local manufacturing footprint which is not fully affected by global freight issues, the regional logistic costs are also increasing up to 20% (road transport)

Despite constant efforts to optimise the cost structure through comprehensive initiatives to improve operations, cost increases have now reached a level, the group said, that can no longer be offset and must be passed on to the market. This is a necessary step to be able to continue supplying high-quality products and services of the broad product portfolio, it said.

More information:
Indorama Mobility Group
Source:

Indorama Mobility Group

(c) Trevira GmbH
08.09.2021

Trevira CS – starting afresh

  • New brand Trevira CS eco

After a challenging 2020 for Trevira CS®, a year in which the coronavirus crisis put pressure on the contract market, in particular on the hotel and event sector, and also on the cruise shipping industry, the market is starting to show some signs of improvement. Numerous new developments are seizing upon the trends that have emerged since the crisis began.

  • New brand Trevira CS eco

After a challenging 2020 for Trevira CS®, a year in which the coronavirus crisis put pressure on the contract market, in particular on the hotel and event sector, and also on the cruise shipping industry, the market is starting to show some signs of improvement. Numerous new developments are seizing upon the trends that have emerged since the crisis began.

Although the coronavirus pandemic had a negative effect on individual business sectors, it also has the potential to open up new market opportunities for flame retardant Trevira CS fabrics in the long run. The increase in people working from home and the longer and more frequent stay within one’s own home have led to a change in perspective in terms of the relevance of interior design. The design of the living space has undergone a revaluation. Sustainability, durability, high quality, and the desire for safe products that contain little to no harmful substances are defining criteria for selecting a new textile interior. The colour range of the new Trevira CS developments is directed specifically towards this trend and often comes across as discreet and close to nature. After Trevira CS products have found their way more and more into private homes, the new Trevira CS collections include numerous attractive textiles not only for the contract sector but also for the residential sector.

In the contract sector, notably in the hotel industry, the trends towards sustainability and quality are likely to continue to grow. Moreover, there is an increase in awareness as far as hygiene requirements are concerned. Textiles that are easy to clean without losing their appearance or their functionality can excel here. Accordingly, products ordinarily used in the healthcare sector might start to be of interest to the hotel and catering industry, public spaces, the transport industry, and to offices. This will apply in particular to areas where there is a regular flow of visitors and where people come into direct contact with fabrics. Antimicrobial textiles provide additional protection in these situations. Besides their flame retardancy, many new Trevira CS products integrate additional functions such as noise or sun protection.

Trevira has launched the Trevira CS eco brand for flame retardant textiles that consist of recycled Trevira products.
The new Trevira CS eco brand unites sustainability and flame retardancy. Trevira offers products for this which have been manufactured through different recycling processes. The flame retardant filament yarns are based on the use of recycled PET bottles (post-consumer recycling). Textiles bearing the Trevira CS eco trademark consist of at least 50% recycled materials.

Trevira uses an agglomeration facility to recycle reusable waste materials from production to manufacture recycled fibres that, after further processing, retain the same quality and performance characteristics as the original products (pre-consumer recycling).

Source:

Trevira GmbH

07.09.2021

Kelheim Fibres to Increase Viscose Fibre Prices from 1. October 2021

Kelheim Fibres GmbH is announcing that with effect from 01. October 2021, or as contracts and agreements allow, prices for its range of viscose fibres will be increased by €0,20/kg. In addition, freight cost adjustments will be applied on an individual customer basis. In cases where energy cost adjustments are not included in contracts and agreements, a temporary energy surcharge will be applied.

“The measures we are taking are absolutely necessary to ensure that Kelheim Fibres remains in a position to supply fibres with the levels of quality and service expected by our customers,” says Matthew North, Commercial Director of Kelheim Fibres.

The year 2021 has brought extraordinary challenges for society and for industry. Alongside the Covid-19 pandemic, recovering demand, disruption in the global freight systems and dramatically increased energy costs are driving significant cost increases for raw materials and negatively influencing supply chains. Prices for energy and freight currently lie well outside their historical ranges.

Kelheim Fibres GmbH is announcing that with effect from 01. October 2021, or as contracts and agreements allow, prices for its range of viscose fibres will be increased by €0,20/kg. In addition, freight cost adjustments will be applied on an individual customer basis. In cases where energy cost adjustments are not included in contracts and agreements, a temporary energy surcharge will be applied.

“The measures we are taking are absolutely necessary to ensure that Kelheim Fibres remains in a position to supply fibres with the levels of quality and service expected by our customers,” says Matthew North, Commercial Director of Kelheim Fibres.

The year 2021 has brought extraordinary challenges for society and for industry. Alongside the Covid-19 pandemic, recovering demand, disruption in the global freight systems and dramatically increased energy costs are driving significant cost increases for raw materials and negatively influencing supply chains. Prices for energy and freight currently lie well outside their historical ranges.

Es sei der Kelheim Fibres GmbH gelungen, die Auswirkungen der Pandemie auf die Faserproduktion zu begrenzen. Aber als Unternehmen mit eigener Kraft-Wärme-Kopplungsanlage und einem hohen Exportanteil in Staaten außerhalb Europas hätten sich diese Kostenfaktoren im zweiten und dritten Quartal 2021 stark negativ auf die Margen ausgewirkt. Da die Energiekosten auf einem beispiellos hohen Niveau verharrten und im vierten Quartal möglicherweise weiter ansteigen werden, keine Entlastung bei den hohen Frachtkosten absehbar sei und auch die Rohstoffkosten auf hohem Niveau blieben, müsse das Unternehmen Maßnahmen ergreifen, um eine weitere Margenerosion zu verhindern.

Kelheim Fibres GmbH had succeeded in limiting the impact of the pandemic on fibre production. However, as a company operating its own cogeneration energy plant and with a high level of export business outside Europe, these cost factors have had a severe negative impact on margins during the second and third quarters of 2021. With energy costs set to remain at unprecedentedly high levels and potentially increase further in the fourth quarter, no relief to the high level of freight costs foreseeable, and raw material costs also remaining at a high level, the company needs to take steps to prevent further margin erosion.

Kelheim Fibres’ Business Managers will be in contact with individual customers during September with further information.

More information:
Kelheim Fibres viscose fibers
Source:

Kelheim Fibres

MUNICH FABRIC START AUTUMN.WINTER 22/23 & BLUEZONE Review (c) Munich Fabric Start Exhibitions GmbH
07.09.2021

MUNICH FABRIC START AUTUMN.WINTER 22/23 & BLUEZONE Review

  • Parade Example for physical Trade Shows

A whole year without physical trade fairs, long months without personal exchange: last week the physical International Textile Trade Show MUNICH FABRIC START and the International Denim Trade Show BLUEZONE took place for the textile industry in Munich. The team at Munich Fabric Start Exhibitions GmbH is bringing a bit of normality back to the industry, but also to event management. Thanks to detailed, Covid-19 compliant fair formats, the organisers show that trade fairs are possible and can be successfully implemented with the appropriate measures.

More than 600 international suppliers presented their new collections and developments for Autumn.Winter 22/23 in around 1000 collections in the Fabrics, Additionals, Design Studios, Sourcing, ReSource and Sustainable Innovations areas at MUNICH FABRIC START as well as denim, sportswear and KEYHOUSE at BLUEZONE.

A winning fusion of BLUEZONE & KEYHOUSE well-attended events

  • Parade Example for physical Trade Shows

A whole year without physical trade fairs, long months without personal exchange: last week the physical International Textile Trade Show MUNICH FABRIC START and the International Denim Trade Show BLUEZONE took place for the textile industry in Munich. The team at Munich Fabric Start Exhibitions GmbH is bringing a bit of normality back to the industry, but also to event management. Thanks to detailed, Covid-19 compliant fair formats, the organisers show that trade fairs are possible and can be successfully implemented with the appropriate measures.

More than 600 international suppliers presented their new collections and developments for Autumn.Winter 22/23 in around 1000 collections in the Fabrics, Additionals, Design Studios, Sourcing, ReSource and Sustainable Innovations areas at MUNICH FABRIC START as well as denim, sportswear and KEYHOUSE at BLUEZONE.

A winning fusion of BLUEZONE & KEYHOUSE well-attended events

Under the motto "BACK TO THE FUTURE", BLUEZONE offered a way back to the tactile experience of textiles and the reunion of the denim community. In addition to international denim weavers and manufacturers, visitors to the Zenith Hall also saw a qualitative selection of KEYHOUSE exhibitors who presented their futuristic innovations for the fashion industry.

Positive visitor & exhibitor echo despite Covid-19 measures

In keeping with the season's title "RISE", the visitors were greeted by inspiring, colourful trend forums with unique highlights for Autumn.Winter 22/23 collection development. In the halls, the industry was able to discover a trade show with the well-known and proven pre-pandemic quality with manufacturers and suppliers presenting in all 8 areas. Non-European suppliers were represented by agencies and offered well-attended show in show concepts.

The newly formed ReSOURCE x SUSTAINABLE INNOVATIONS Area also drew in the crowds. In a modern atmosphere, information was shared on sourcing sustainable textiles and additionals as well as innovative concepts. Another highlight was the launch of FABRIC.iD, the innovative process for the complete digitisation of fabrics to greater serve the industry's digital future.

30.08.2021

Biden Administration Awards $6.5M Contract to US Cotton LLC

  • Ramping Up Production of American-Made Polyester Tipped Swabs

The Biden Administration has awarded a contract for $6.5 million to U.S. Cotton LLC, the largest manufacturer of cotton swabs in the United States, to increase domestic production capability for polyester tipped swabs for home testing kits and mass testing applications to fight the COVID-19 pandemic.  Since the beginning of the pandemic, U.S. Cotton has retooled operations to produce over 400 million COVID testing kit swabs.

The Department of Defense (DOD), in coordination with the Department of Health and Human Services (HHS), announced the award today as part of the administration’s broader effort to increase domestic production capability for essential medical supplies.

U.S. Cotton, based in Cleveland, Ohio, said the company will increase its production capacity from 92 million polyester swab tips per month to approximately 371 million polyester swab tips per month by May 2022 to support domestic COVID-19 testing. The DOD contract award was funded through the American Rescue Plan Act (ARPA) to support the domestic industry base expansion for critical medical resources.

  • Ramping Up Production of American-Made Polyester Tipped Swabs

The Biden Administration has awarded a contract for $6.5 million to U.S. Cotton LLC, the largest manufacturer of cotton swabs in the United States, to increase domestic production capability for polyester tipped swabs for home testing kits and mass testing applications to fight the COVID-19 pandemic.  Since the beginning of the pandemic, U.S. Cotton has retooled operations to produce over 400 million COVID testing kit swabs.

The Department of Defense (DOD), in coordination with the Department of Health and Human Services (HHS), announced the award today as part of the administration’s broader effort to increase domestic production capability for essential medical supplies.

U.S. Cotton, based in Cleveland, Ohio, said the company will increase its production capacity from 92 million polyester swab tips per month to approximately 371 million polyester swab tips per month by May 2022 to support domestic COVID-19 testing. The DOD contract award was funded through the American Rescue Plan Act (ARPA) to support the domestic industry base expansion for critical medical resources.

John Nims, President of U.S. Cotton said, “We are proud to be involved in a national effort to help deploy these testing kit swabs for the American people. These swabs are designed to make it easier for people at home to self-administer coronavirus tests and will also be used for mass testing applications, which is critically important. We greatly appreciate the collaboration with DOD and HHS to ramp up essential capacity of polyester-based synthetic swabs that will help in the fight against the pandemic.

“We continue to step up to meet our nation’s critical need for American-made coronavirus testing kit swabs on a massive scale. It is an honor to work with our government to help fight this pandemic and use our innovative technologies based here in the United States to fill a national and global demand for testing kits. I especially want to thank Senator Brown and Senator Portman for all their incredible support to help us retool and expand our operations in Cleveland. We can’t thank them enough for their tireless work and also want to recognize their hard working staff. As the Delta variant surges across the country, this timely investment will help in the fight against COVID by adding this much-needed, long-term surge capacity.”

Kim Glas, President and CEO of NCTO, said, “We want to sincerely thank President Biden, the Department of Defense, and the Department of Health and Human Services for leading this critical industrial expansion effort. We appreciate the administration’s commitment to expand the U.S. industrial base for these essential products.  We have a once-in-a-generation opportunity to onshore these critical supply chains long-term and we look forward to working with the administration and Congress to advance long-term solutions.”

More information:
corona virus NCTO
Source:

NCTO

(c) JANDALI MODE.MEDIEN.MESSEN für CHIC
10.08.2021

CHIC Shanghai in October instead of August 2021

Instead of taking place from August 25-27 as originally planned, Asia's leading trade fair for fashion and lifestyle will now be held from October 9-11, 2021 at the National Exhibition and Convention Center in Shanghai. The fair has been taking place physically again since July 2020, always in compliance with strict safety and hygiene regulations. Various digital platforms are being set up in parallel.

The around 500 brands registered for CHIC (August) will now present themselves to the trade visitors in autumn on 62,000 sqm, including important industry players such as JINTIANSHI (menswear), VINI Bespoke (menswear), Zaijiu (womenswear), Jiebeidi (womenswear), COFNA (childrenswear), Laura Vita (shoes), Hattershub (headwear), MANNYLONQ (CHIC-Young Blood) and Dragon Heart (CHIC-Young Blood) and exciting up-and-coming designers such as KIMUSSO, Yujiantian and Wuma.

Instead of taking place from August 25-27 as originally planned, Asia's leading trade fair for fashion and lifestyle will now be held from October 9-11, 2021 at the National Exhibition and Convention Center in Shanghai. The fair has been taking place physically again since July 2020, always in compliance with strict safety and hygiene regulations. Various digital platforms are being set up in parallel.

The around 500 brands registered for CHIC (August) will now present themselves to the trade visitors in autumn on 62,000 sqm, including important industry players such as JINTIANSHI (menswear), VINI Bespoke (menswear), Zaijiu (womenswear), Jiebeidi (womenswear), COFNA (childrenswear), Laura Vita (shoes), Hattershub (headwear), MANNYLONQ (CHIC-Young Blood) and Dragon Heart (CHIC-Young Blood) and exciting up-and-coming designers such as KIMUSSO, Yujiantian and Wuma.

The expected 60,000 visitors are also able to attend seminars and workshops on current topics such as Recognition and new opportunities of new retail in AI Fashion or 2021 Maker of Silk Road & Innovation of Design Infinity -- The Innovation and Entrepreneurship Competition of China Textile & Apparel SME.

Next events:
CHIC Shenzhen | 3rd-5th November 2021 | Shenzhen
CHIC March 22 | 9-11 March 2022 | Shanghai

Source:

JANDALI MODE.MEDIEN.MESSEN

Foto: Pixabay
04.08.2021

Autumn Editions of Intertextile Shanghai and Yarn Expo postponed

In light of recent Covid-19 cases in China, the Autumn Editions of Intertextile Shanghai Apparel Fabrics, Intertextile Shanghai Home Textiles and Yarn Expo will be rescheduled to 9 – 11 October 2021. The fairs were originally due to take place at the end of August at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained: “To comply with the government guidelines for pandemic containment and following discussions with our stakeholders, we have made the decision to postpone the fairs from their original August timing. To allow our exhibitors and buyers as much time as possible to plan ahead, we have already confirmed new dates with the fairground for the three concurrent fairs: 9 – 11 October.”

In light of recent Covid-19 cases in China, the Autumn Editions of Intertextile Shanghai Apparel Fabrics, Intertextile Shanghai Home Textiles and Yarn Expo will be rescheduled to 9 – 11 October 2021. The fairs were originally due to take place at the end of August at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained: “To comply with the government guidelines for pandemic containment and following discussions with our stakeholders, we have made the decision to postpone the fairs from their original August timing. To allow our exhibitors and buyers as much time as possible to plan ahead, we have already confirmed new dates with the fairground for the three concurrent fairs: 9 – 11 October.”

“I would like to thank the participants of all three fairs for their understanding and ongoing support as we continue to operate in uncertain times. We remain dedicated to providing a quality international trading platform for three sectors for the autumn / winter sourcing season, and our overseas suppliers will still be able to participate through our hybrid exhibition scheme if they are unable to be in Shanghai in-person.”

Exhibitors or visitors with any queries about these fairs should email textile@hongkong.messefrankfurt.com, or visit the fairs’ respective websites:
•    Intertextile Shanghai Apparel Fabrics: https://intertextileapparel.hk.messefrankfurt.com/
•    Intertextile Shanghai Home Textiles: https://intertextilehome.hk.messefrankfurt.com/
•    Yarn Expo: www.yarnexpochina.com

Intertextile Shanghai Apparel Fabrics is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. The co-organisers of Yarn Expo are Messe Frankfurt (HK) Ltd and the Sub-Council of Textile Industry, CCPIT. Intertextile Shanghai Home Textiles is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

21.07.2021

Green fashion community to meet at INNATEX

The 48th INNATEX is opening its doors at the Messecenter Rhein-Main in Hofheim-Wallau from 31 July to 2 August 2021. More than 200 labels are poised to appear at the international trade fair for sustainable textiles. Following a long string of industry gatherings being cancelled due to COVID-19, the summer trade fair is a first opportunity for the sector to get together. All visitors are required to register digitally  in advance of the fair.

The pandemic has presented an opportunity to launch new projects. They include a special zone created in collaboration with GIZ GmbH, the German society for international development, which will shine a light on African designers. 13 labels from Ethiopia, Kenya, Rwanda, South Africa, Tanzania, and Uganda will present their ideas for sustainable textiles and fashion products.

The starting point for the special area is a virtual trade fair, commissioned by the Federal Ministry for Economic Cooperation and Development. GIZ GmbH has realised the joint project in cooperation with several partners; its physical extension can be visited at INNATEX.

The 48th INNATEX is opening its doors at the Messecenter Rhein-Main in Hofheim-Wallau from 31 July to 2 August 2021. More than 200 labels are poised to appear at the international trade fair for sustainable textiles. Following a long string of industry gatherings being cancelled due to COVID-19, the summer trade fair is a first opportunity for the sector to get together. All visitors are required to register digitally  in advance of the fair.

The pandemic has presented an opportunity to launch new projects. They include a special zone created in collaboration with GIZ GmbH, the German society for international development, which will shine a light on African designers. 13 labels from Ethiopia, Kenya, Rwanda, South Africa, Tanzania, and Uganda will present their ideas for sustainable textiles and fashion products.

The starting point for the special area is a virtual trade fair, commissioned by the Federal Ministry for Economic Cooperation and Development. GIZ GmbH has realised the joint project in cooperation with several partners; its physical extension can be visited at INNATEX.

Exhibitors include well-known pioneers and young newcomers
The IVN (International Association of Natural Textile Industry), which sponsors INNATEX, is staging its own pop-up showroom. In doing so, the association is creating its own curated space, showcasing the diversity and special features of its members. The future objective is to expand this space with the organiser to create a growing Concept Area that introduces visitors to different ways of presenting green fashion.

Besides the IVN, the Global Organic Textile Standard, the Green Button and Fairtrade are among the other standardisation bodies represented at the fair. In addition, a special exhibition entitled “Fashion in the Hood” (Fashion im Kiez) and delivered by the young interest group “Frankfurt Fashion Movement”, helps visitors join the dots in the fashion industry. Among the labels exhibiting at the fair for the first time are Active Wear by Klitmøller Collective from Denmark, Organic Fashion by Bibico from the UK and Italian sneaker brand ACBC.

More information:
INNATEX
Source:

UBERMUT GbR für INNATEX

15.07.2021

Rieter: First half of 2021

  • Order intake of CHF 975.3 million (first half of 2020: CHF 250.7 million).
  • Sales of CHF 400.5 million (first half of 2020: CHF 254.9 million).
  • EBIT of CHF 9.0 million and net profit of CHF 5.3 million

The first half of 2021 has been characterized by a strong market recovery in combination with a regional shift in demand for new machinery and systems. Rieter anticipates a normalization of the demand for new systems in the coming months. The company assumes that spinning mills will continue to work at high-capacity levels.

For the full year, Rieter expects sales to be above CHF 900 million.

The realization of sales from the order backlog continues to be associated with risks in light of bottlenecks in material deliveries and freight capacities as well as the ongoing pandemic in key markets for Rieter.

In recent years, Rieter has implemented its strategy based on the cornerstones of innovation leadership, strengthening the components, spare parts and services businesses, and adjusting cost structures.

  • Order intake of CHF 975.3 million (first half of 2020: CHF 250.7 million).
  • Sales of CHF 400.5 million (first half of 2020: CHF 254.9 million).
  • EBIT of CHF 9.0 million and net profit of CHF 5.3 million

The first half of 2021 has been characterized by a strong market recovery in combination with a regional shift in demand for new machinery and systems. Rieter anticipates a normalization of the demand for new systems in the coming months. The company assumes that spinning mills will continue to work at high-capacity levels.

For the full year, Rieter expects sales to be above CHF 900 million.

The realization of sales from the order backlog continues to be associated with risks in light of bottlenecks in material deliveries and freight capacities as well as the ongoing pandemic in key markets for Rieter.

In recent years, Rieter has implemented its strategy based on the cornerstones of innovation leadership, strengthening the components, spare parts and services businesses, and adjusting cost structures.

Crisis management in the pandemic year of 2020 was aimed at protecting employees, fulfilling customer commitments, ensuring liquidity, and also strengthening the market position for the time after the pandemic as well as retaining the ability to benefit from the incipient market recovery.

The focus for 2021 remains on the implementation of this strategy. The measures for crisis management relating to the protection of employees and fulfilling customer commitments are still in effect in countries that continue to be affected by the pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

Source:

Rieter

13.07.2021

SGL Carbon SE: Preliminary sales and earnings figures for the first half of the year

  • Forecast raised for 2021

Based on the encouraging business performance in the first half of 2021 and the transformation successes, SGL Carbon expects strong Group results for the first six months of 2021 and raises its guidance for fiscal year 2021.

The company expects to exceed the upper end of the stated range of its Group EBITDA pre1 guidance (earnings before interest, taxes and depreciation adjusted by non-recurring items and one-time effects) for fiscal year 2021 of EUR 100 to 120 million and raises the EBITDA pre guidance for 2021 to EUR 130 –140 million.

SGL Carbon's sales forecast is also increased slightly to approximately EUR 1.0 billion for the current fiscal year, up from EUR 920 – 970 million originally. The company expects free cash flow for the full year to be correspondingly above the forecast of EUR 20 million given at the beginning of the year. A slightly positive consolidated net result is also predicted for 2021.

  • Forecast raised for 2021

Based on the encouraging business performance in the first half of 2021 and the transformation successes, SGL Carbon expects strong Group results for the first six months of 2021 and raises its guidance for fiscal year 2021.

The company expects to exceed the upper end of the stated range of its Group EBITDA pre1 guidance (earnings before interest, taxes and depreciation adjusted by non-recurring items and one-time effects) for fiscal year 2021 of EUR 100 to 120 million and raises the EBITDA pre guidance for 2021 to EUR 130 –140 million.

SGL Carbon's sales forecast is also increased slightly to approximately EUR 1.0 billion for the current fiscal year, up from EUR 920 – 970 million originally. The company expects free cash flow for the full year to be correspondingly above the forecast of EUR 20 million given at the beginning of the year. A slightly positive consolidated net result is also predicted for 2021.

Previously, the company had assumed a consolidated net result of between EUR -20 million and EUR 0. According to preliminary figures, SGL Carbon expects Group sales for H1 2021 of around EUR 496 million (H1 2020: EUR 456.5 million). This corresponds to an increase of around 9% compared to the same period of the previous year. Based on the sales increase and the cost effects achieved from the transformation, EBITDA pre (EBITDA before non-recurring items and one-time effects) increased to around EUR 72 million in the first six months of 2021 (H1 2020: EUR 42.0 million).

The updated forecast for fiscal 2021 has been prepared on the basis of the prevailing market environment and assumes no deterioration in conditions due to the corona pandemic. In particular, it is based on the assumption that purchasing prices and logistics chains remain stable and production lines remain in operation. The communicated medium-term targets up to 2025 remain unaffected by the forecast adjustment. SGL Carbon will release its 2021 half-year figures as planned on August 12, 2021.

More information:
SGL Carbon SGL Carbon SE
Source:

SGL Carbon SE

World of Wipes® International Conference Expected to Draw More than 400 Attendees July 12-15 in Atlanta (c) WOW
WOW 2021
21.06.2021

Nonwovens Industry Demonstrates Readiness to Return to Business In-Person

  • World of Wipes® International Conference Expected to Draw More than 400 Attendees July 12-15 in Atlanta

As business activity emerges with renewed enthusiasm post-pandemic, more than 400 attendees are expected to attend the World of Wipes® International Conference July 12-15 at the Atlanta Marriott Marquis with over 50 tabletop exhibits at the two evening receptions.

In a sign of the industry’s strong desire to return to business in-person, INDA is anticipating a full show for a dynamic interactive experience with wipes industry professionals at WOW 2021. With less than a month to go, over 350 wipes professionals have already registered and registration remains open.

“We are pleased to open our doors for WOW 2021 and have our wipes professionals gather once again for face-to-face business, educational program content and social interactions,” said Dave Rousse, INDA President. “INDA is looking forward to welcoming industry friends to re-engage and bringing attendees together to forge new relationships.”

  • World of Wipes® International Conference Expected to Draw More than 400 Attendees July 12-15 in Atlanta

As business activity emerges with renewed enthusiasm post-pandemic, more than 400 attendees are expected to attend the World of Wipes® International Conference July 12-15 at the Atlanta Marriott Marquis with over 50 tabletop exhibits at the two evening receptions.

In a sign of the industry’s strong desire to return to business in-person, INDA is anticipating a full show for a dynamic interactive experience with wipes industry professionals at WOW 2021. With less than a month to go, over 350 wipes professionals have already registered and registration remains open.

“We are pleased to open our doors for WOW 2021 and have our wipes professionals gather once again for face-to-face business, educational program content and social interactions,” said Dave Rousse, INDA President. “INDA is looking forward to welcoming industry friends to re-engage and bringing attendees together to forge new relationships.”

The three-day conference will deliver the latest insights and material science developments in key areas for business growth in this vital market with themes focused on sustainability issues, the impact of COVID-19 on consumer wipes, regulatory trends, flushability and more.

WOW 2021 Highlights

July 12 – The learning gets started with the separate one-and-a-half-day WIPES Academy led by Chris Plotz, INDA Director of Education and Technical Affairs, providing critical training on research, development and manufacturing of wipes. WOW 2021 will officially kick off with an evening welcome reception in the Marriott’s Imperial Foyer.

July 13 – WOW attendees are greeted by INDA’s President, Dave Rousse. The compelling conference program gets underway with the following sessions:

  • Wipes and the Growing Plastics Debate
  • Government Affairs Update 
  • The Confusing World of Regulations Impacting the Disinfecting and Sanitizing Wipes
  • Presentations by the three finalists for the World of Wipes Innovation Award® – Kimberly-Clark Scott Sanitizing Wipes, Lenzing™ Lyocell Skin fibers and Shark

July 14 – Industry-leading experts will present on thought-provoking topics related to wipes trends, innovations, sustainable packaging and the impact of COVID-19 during this packed second day. Among the not-to-be-missed sessions are:

  • Trends in the Wipes Market and Among Consumers
  • Innovation in Wet Wipe Preservatives
  • COVID-19 Impact on Wipes Consumption and Cleaning Habits
  • Sustainable Packaging and Dispensing for Wipes 

July 15 – Sustainability will be a headliner for this third day as well as the presentation of INDA’s prestigious award for innovation.

  • Nonwoven Substrates for More Sustainable Wipes
  • Flushable Wipes: Loved by Consumers, Wrongly Accused by Utilities

In addition to the strong conference content, at least 50 companies will exhibit their products and services during two evenings of one-and-a-half-hour tabletop exhibitions with networking receptions.

WOW 2021 will conclude with the exciting announcement of the World of Wipes Innovation Award® by Dave Rousse.

In addition to the live component, a conference recording will be available on demand two weeks after the event. INDA maintains its commitment to adhering to all CDC protocols and guidelines for a safe event. For the full event details, visit the WOW website.

16.06.2021

Closed-loop recycling pilot project for single-use facemasks

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

“Recognizing the challenge, we set out to explore how used facemasks could potentially be returned into the value chain of new facemask production”, says Dr. Peter Dziezok, Director R&D Open Innovation at P&G. “But creating a true circular solution from both a sustainable and an economically feasible perspective takes partners. Therefore, we teamed up with Fraunhofer CCPE and Fraunhofer UMSICHT’s expert scientists and SABIC’s Technology & Innovation specialists to investigate potential solutions.”

As part of the pilot, P&G collected used facemasks worn by employees or given to visitors at its manufacturing and research sites in Germany. Although those masks are always disposed of responsibly, there was no ideal route in place to recycle them efficiently. To help demonstrate a potential step change in this scenario, special collection bins were set up, and the collected used masks were sent to Fraunhofer for further processing in a dedicated research pyrolysis plant.

“A single-use medical product such as a face mask has high hygiene requirements, both in terms of disposal and production. Mechanical recycling, would have not done the job”, explains Dr. Alexander Hofmann, Head of Department Recycling Management at Fraunhofer UMSICHT. “In our solution, therefore, the masks were first automatically shredded and then thermochemically converted to pyrolysis oil. Pyrolysis breaks the plastic down into molecular fragments under pressure and heat, which will also destroy any residual pollutants or pathogens, such as the Coronavirus. In this way it is possible to produce feedstock for new plastics in virgin quality that can also meet the requirements for medical products”, adds Hofmann, who is also Head of Research Department “Advanced Recycling” at Fraunhofer CCPE.

The pyrolysis oil was then sent to SABIC to be used as feedstock for the production of new PP resin. The resins were produced using the widely recognized principle of mass balance to combine the alternative feedstock with fossil-based feedstock in the production process. Mass balance is considered a crucial bridge between today’s large scale linear economy and the more sustainable circular economy of the future, which today is operated on a smaller scale but is expected to grow quickly.

“The high-quality circular PP polymer obtained in this pilot clearly demonstrates that closed-loop recycling is achievable through active collaboration of players from across the value chain”, emphasizes Mark Vester, Global Circular Economy Leader at SABIC. “The circular material is part of our TRUCIRCLE™ portfolio, aimed at preventing valuable used plastic from becoming waste and at mitigating the depletion of fossil resources.”

Finally, to close the loop, the PP polymer was supplied to P&G, where it was processed into non-woven fibers material. “This pilot project has helped us to assess if the close loop approach could work for hygienic and medical grade plastics”, says Hansjörg Reick, P&G Senior Director Open Innovation. “Of course, further work is needed but the results so far have been very encouraging.”

The entire closed loop pilot project from facemask collection to production was developed and implemented within seven months. The transferability of advanced recycling to other feedstocks and chemical products is being further researched at Fraunhofer CCPE.

Source:

Fraunhofer

Digital Pioneer Awards ceremony at the digitalCHURCH (c) digitalHUB Aachen e.V.; photo: Thomas Langens
Digital Pioneer Awards ceremony at the digitalCHURCH
15.06.2021

ITA Academy GmbH wins Digital Pioneer Award 2021

  • Digital Pioneer Awards ceremony at the digitalCHURCH
  • ITA Academy GmbH was honoured to receive the Digital Pioneer Award at the Digital Summit Event in Aachen on June 09, 2021.

The Digital Pioneer Award is given to companies that drive digitalisation with digital business models, processes or digital products. ITA Academy GmbH was honoured with the Digital Capability Center (DCC) Aachen and its support of companies in their digital transformation.

  • Digital Pioneer Awards ceremony at the digitalCHURCH
  • ITA Academy GmbH was honoured to receive the Digital Pioneer Award at the Digital Summit Event in Aachen on June 09, 2021.

The Digital Pioneer Award is given to companies that drive digitalisation with digital business models, processes or digital products. ITA Academy GmbH was honoured with the Digital Capability Center (DCC) Aachen and its support of companies in their digital transformation.

Using the latest didactic methods, sophisticated solution concepts and state-of-the-art technologies, the DCC Aachen supports people in keeping up with the digital future and becoming pioneers in digital transformation. In order to make innovative solutions such as AI and digital assistance systems tangible, the ITA Academy founded the Digital Capability Center (DCC) Aachen together with McKinsey & Company in 2017. The DCC is a model factory 4.0 in which digital applications are demonstrated and taught using the example of a realistic factory. The DCC thus offers a learning environment for companies in which participants are supported in building up competencies in the field of digital transformation in the form of practical work-shops.

The digital pioneers are to be publicised as best-practice examples in order to sensitize regional SMEs to the topic of digitisation. Around the award of the digital pioneers, the digitalHUB Aachen e.V. rolls out effective marketing activities. The pioneers achieve high visibility through the various planned campaigns and advertising opportunities.

09.06.2021

EURATEX calls for an effective EU Industrial strategy

On the occasion of releasing its 2021 Spring Report, EURATEX calls the European Institutions to implement a new Industrial Strategy which will effectively support the European textiles industry. EURATEX welcomes the fact that Textile and Clothing industry is recognised as one of the 14 essential ecosystems of the European economy, but we need to take effective measures to support these sectors, and take into consideration the global dimension.

On the occasion of releasing its 2021 Spring Report, EURATEX calls the European Institutions to implement a new Industrial Strategy which will effectively support the European textiles industry. EURATEX welcomes the fact that Textile and Clothing industry is recognised as one of the 14 essential ecosystems of the European economy, but we need to take effective measures to support these sectors, and take into consideration the global dimension.

Economic data for 2020 in EURATEX Spring Report show preoccupying trends. Figures reflect a dramatic contraction in demand and production: EU turnover contracted by -9.3% in textiles (which is in line with the general manufacturing average) and by -17.7% in clothing, compared with 2019. Furthermore, supply chain disruptions and substantial price increases of some raw materials are putting significant pressure on the T&C industries across Europe. The trade deficit for European textiles and clothing jumped from € -47 bln in 2019 to € -62 bln in 2020, an increase of more than 30%, which is almost entirely due to the import of Chinese face masks and related products. Fortunately, more recent figures from the 1st quarter of 2021 indicate some signs of recovery.

That figure illustrates very well today’s political discussions on the future of the European industry. Many European companies have made considerable efforts to adapt their production to the pandemic, but clearly this was not enough. Whether the production cost in Europe is too high or the EU should adapt its procurement rules, the industry needs have a coherent long-term plan to become more competitive and conquer new markets.

EURATEX General Assembly highlighted the critical role of the new EU Industrial Strategy. The inclusion of textiles and clothing in the fourteen ecosystems is a step in the right direction to consolidate the industrial base but we should look also at the global challenges. European companies should continue investing in innovation, design and quality, in combination with a structural move towards more sustainable textiles. At the same time, the EU should create an environment - both inside the Single Market and globally - where everybody plays by the same rules.

Source:

Euratex

Techtextil and Texprocess 2022: registration now open (c) Messe Frankfurt
08.06.2021

Techtextil and Texprocess 2022: registration now open

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022.

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022. The desire for personal encounters, direct communication and new impressions is growing from day to day”, says Olaf Schmidt, Vice President Textiles and Textile Technologies.

Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies, emphasises that, “Texprocess and Techtextil are the world’s foremost trade fairs for our innovative sector by a large margin. Both events offer customers an unrivalled overview of state-of-the-art innovations and technological developments – and beyond. Particularly when it comes to the latest trends for sustainability and digitalisation, Texprocess and Techtextil in Frankfurt represent the most important, future-oriented market. This makes it all the more important for both the exhibitor and visitor sides of the sector that we have the opportunity to obtain an overview of the latest market developments, to exchange ideas and information and to initiate new business. We are very relieved about this and hope that, next year, we will once again have the chance to generate new momentum for our sector in the international market.”

For the first time, Techtextil and Texprocess will occupy the western sector of Frankfurt Fair and Exhibition Centre with a total of four exhibition halls and, with a hybrid format, offer the best of both the physical and immaterial worlds: personal communication, virtual networking opportunities and maximum digital coverage. With a comprehensive hygiene and safety concept, Messe Frankfurt will ensure that all visitors and exhibitors can take part safely and with a good feeling.

Source:

Messe Frankfurt

VDMA member companies at ITMA ASIA + CITME (c) ITMA
07.06.2021

VDMA member companies at ITMA ASIA + CITME

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

  • Oerlikon Polymer Processing Solutions Division
  • Truetzschler Group
  • Neuenhauser
  • Saurer
  • Karl Mayer
  • Groz-Beckert
  • Herzog
  • Lenze
  • Mahlo
  • Sedo Treepoint
  • Thies

Instead of visiting the show personally, the VDMA offers a virtual trip to Asia. The established "Textile Machinery Webtalk" series via the newsroom IndustryArena will focus on ITMA ASIA in the run-up to the fair: VDMA Webtalks meet ITMA ASIA.

*See attached document for more information.