From the Sector

Reset
75 results
25.03.2024

SGL Carbon: CEO Dr. Torsten Derr will not extend contract

The CEO of SGL Carbon SE, Dr. Torsten Derr, informed the Chairman of the Supervisory Board today that he will not extend his contract, which expires on May 31, 2025. Dr. Derr will continue his duties until the new CEO is appointed, at the latest until May 31, 2025.

“SGL Carbon is once again a strong and stable company whose profitable development I will continue to work on with all my strength until the last day. But even without me, my colleague on the Board of Management, Thomas Dippold, and the team will continue to develop the company successfully. The last almost four years have always been the achievement of the entire SGL team. SGL Carbon is now sailing in stable waters and my transformation work will therefore be completed shortly,” explains Dr. Torsten Derr.

The CEO of SGL Carbon SE, Dr. Torsten Derr, informed the Chairman of the Supervisory Board today that he will not extend his contract, which expires on May 31, 2025. Dr. Derr will continue his duties until the new CEO is appointed, at the latest until May 31, 2025.

“SGL Carbon is once again a strong and stable company whose profitable development I will continue to work on with all my strength until the last day. But even without me, my colleague on the Board of Management, Thomas Dippold, and the team will continue to develop the company successfully. The last almost four years have always been the achievement of the entire SGL team. SGL Carbon is now sailing in stable waters and my transformation work will therefore be completed shortly,” explains Dr. Torsten Derr.

“We are grateful to Dr. Derr for talking to us early on and in a spirit of trust. This will allow us to take our time in arranging his succession. SGL Carbon can look back on three successful financial years, is financially strong and relies on a broad-based management team that continues to drive forward the expansion of the business in strong growth markets. In our appreciative discussions, Dr. Derr has promised to complete all important projects with his usual commitment until the handover of the CEO position,” says Prof. Dr. Frank Richter.

The Supervisory Board will immediately begin the search for a successor to Dr. Torsten Derr.

More information:
SGL Carbon SE CEO management
Source:

SGL Carbon SE

NRW.Energy4Climate veröffentlicht Diskussionspapier. © Warchi-iStock.com
NRW.Energy4Climate veröffentlicht Diskussionspapier.
13.02.2024

Klimaneutrale Industrie braucht schnelle Genehmigungsverfahren

Für die Transformation der Industrie hin zur Klimaneutralität sind zügige Genehmigungsverfahren eine zentrale Rahmenbedingung. Denn sie bestimmen darüber, ob notwendige Maßnahmen schnell umgesetzt werden können. Mit dem nun veröffentlichten Diskussionspapier legt die unter dem Dach der Landesgesellschaft NRW.Energy4Climate arbeitende Initiative IN4climate.NRW konkrete Vorschläge zur Weiterentwicklung des Rechtsrahmens vor.

EnWG, UVPG, BImSchG, BauGB: Diese Kürzel stehen für Bundesgesetze, die erheblichen Einfluss auf die Dauer von Genehmigungsverfahren nehmen können. Um die Industrie beim klimaneutralen Umbau bestmöglich zu unterstützen, ist es notwendig, diesen bestehenden Rechtsrahmen weiterzuentwickeln. Hier setzt das Diskussionspapier »Vorschläge zur Beschleunigung von Genehmigungsverfahren für die Transformation der Industrie zur Klimaverträglichkeit« an. In fünf Themenfeldern formuliert das Papier Vorschläge zur Änderung des Bundesrechts. Ausgangspunkt sind dabei Praxiserfahrungen der energieintensiven Grundstoffindustrie und der zugehörigen Infrastruktursektoren.

Für die Transformation der Industrie hin zur Klimaneutralität sind zügige Genehmigungsverfahren eine zentrale Rahmenbedingung. Denn sie bestimmen darüber, ob notwendige Maßnahmen schnell umgesetzt werden können. Mit dem nun veröffentlichten Diskussionspapier legt die unter dem Dach der Landesgesellschaft NRW.Energy4Climate arbeitende Initiative IN4climate.NRW konkrete Vorschläge zur Weiterentwicklung des Rechtsrahmens vor.

EnWG, UVPG, BImSchG, BauGB: Diese Kürzel stehen für Bundesgesetze, die erheblichen Einfluss auf die Dauer von Genehmigungsverfahren nehmen können. Um die Industrie beim klimaneutralen Umbau bestmöglich zu unterstützen, ist es notwendig, diesen bestehenden Rechtsrahmen weiterzuentwickeln. Hier setzt das Diskussionspapier »Vorschläge zur Beschleunigung von Genehmigungsverfahren für die Transformation der Industrie zur Klimaverträglichkeit« an. In fünf Themenfeldern formuliert das Papier Vorschläge zur Änderung des Bundesrechts. Ausgangspunkt sind dabei Praxiserfahrungen der energieintensiven Grundstoffindustrie und der zugehörigen Infrastruktursektoren.

Samir Khayat, Geschäftsführer von NRW.Energy4Climate: »In unserer Initiative IN4climate.NRW bringen wir Wissenschaft, Politik und Wirtschaft an einen Tisch und erarbeiten Lösungsansätze, um den klimaneutralen Umbau der Industrie in der Praxis umzusetzen. Schnelle Genehmigungsverfahren sind hierbei von ganz zentraler Bedeutung. In dem Diskussionspapier machen wir konkrete Vorschläge, die echtes Beschleunigungspotenzial haben. Denn notwendige Umbaumaßen müssen, unter Wahrung der rechtlichen Vorgaben, zeitnah und zielgerichtet umgesetzt werden können.«

Den Diskussionsbeitrag hat IN4climate.NRW gemeinsam mit Partnerunternehmen in der Arbeitsgruppe »Genehmigungsverfahren« erarbeitet. Hierzu gehören Heidelberg Materials, thyssenkrupp Steel, Open Grid Europe und das Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT.

Bundeseinheitliche Beschleunigung von Fachverfahren
Prof. Dr.-Ing. Ulrich Seifert vom Fraunhofer UMSICHT und einer der Autoren: »Die grundsätzliche Passfähigkeit der Vorschläge in den bestehenden Rechtsrahmen und plausibel darstellbare Bezüge zu übergeordneten, rechtsverbindlichen Zielen des Klimaschutzes waren die Leitmerkmale, um aus den beigesteuerten Hinweisen und Empfehlungen der Industriepartner eine Auswahl treffen und ausformulieren zu können. Die Vorschläge konzentrieren sich auf mögliche Änderungen des Bundesrechts, da in erster Linie eine bundeseinheitliche Beschleunigung von Fachverfahren angestrebt werden sollte, die allen Betroffenen in der Praxis zugutekommt. Sie folgen dem erkannten Bedarf, Transformationsvorhaben in der Breite den Weg zu ebnen und dabei auch notwendige Infrastrukturen einzubeziehen.«

Einige der in dem Papier enthaltenen Vorschläge sind bereits Gegenstand laufender Prozesse zur Gesetzesnovellierung, zu welchen das Papier durch die Einbettung in Praxiserfahrungen einen ergänzenden Beitrag leisten möchte. Die Vorschläge sind in die Themenfelder Energiewirtschaftsgesetz (EnWG), Gesetz über die Umweltverträglichkeitsprüfung (UVPG), Bundes-Immissionsschutzgesetz (BImSchG), Baugesetzbuch (BauGB) und Übergreifendes untergliedert. Jedem Änderungsvorschlag wird eine kurze Beschreibung der rechtlichen Situation vorangestellt, die die Problematik mit dem Blick auf zügige Genehmigungsverfahren veranschaulicht. Dem einzelnen Änderungsvorschlag folgt die juristische Begründung.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

 

Wissenschaftspreis UMSICHT © Fraunhofer UMSICHT
20.12.2023

UMSICHT-Wissenschaftspreis 2024

Der Förderverein des Fraunhofer UMSICHT verleiht zum 15. Mal den UMSICHT-Wissenschaftspreis und zeichnet Menschen aus, die mit ihrer Arbeit den Dialog zwischen Wissenschaft und Gesellschaft fördern. Ab sofort und noch bis zum 29. Februar 2024 können sich potenzielle Preisträgerinnen und Preisträger in den Kategorien Wissenschaft und Journalismus bewerben.

Seit 2010 prämiert der UMSICHT-Förderverein Wissenschaftler*innen und Journalist*innen mit dem UMSICHT-Wissenschaftspreis, die Forschungsergebnisse zu den Themen Umweltschutz und Nachhaltigkeit der Gesellschaft zugänglich machen. Die Wahl trifft eine Jury aus Wissenschaftler*innen, Unternehmer*innen, Selbstständigen, Journalist*innen und PR-Fachleuten. Neben dem Preisgeld von 8000 Euro in der Kategorie Wissenschaft, 2000 Euro in der Kategorie Journalismus und der Skulptur »Innovation« erhalten die Preisträger*innen Zugang zum Netzwerk einer anerkannten Forschungseinrichtung und knüpfen Kontakte in Wissenschaft, Wirtschaft und Politik.

Der Förderverein des Fraunhofer UMSICHT verleiht zum 15. Mal den UMSICHT-Wissenschaftspreis und zeichnet Menschen aus, die mit ihrer Arbeit den Dialog zwischen Wissenschaft und Gesellschaft fördern. Ab sofort und noch bis zum 29. Februar 2024 können sich potenzielle Preisträgerinnen und Preisträger in den Kategorien Wissenschaft und Journalismus bewerben.

Seit 2010 prämiert der UMSICHT-Förderverein Wissenschaftler*innen und Journalist*innen mit dem UMSICHT-Wissenschaftspreis, die Forschungsergebnisse zu den Themen Umweltschutz und Nachhaltigkeit der Gesellschaft zugänglich machen. Die Wahl trifft eine Jury aus Wissenschaftler*innen, Unternehmer*innen, Selbstständigen, Journalist*innen und PR-Fachleuten. Neben dem Preisgeld von 8000 Euro in der Kategorie Wissenschaft, 2000 Euro in der Kategorie Journalismus und der Skulptur »Innovation« erhalten die Preisträger*innen Zugang zum Netzwerk einer anerkannten Forschungseinrichtung und knüpfen Kontakte in Wissenschaft, Wirtschaft und Politik.

In der Kategorie Wissenschaft sind neben Dissertationen Abschlussberichte, Studien etc. gern gesehen. Ein besonderes Augenmerk bei der Beurteilung liegt auf dem fachwissenschaftlichen Niveau und dem nachhaltigen Nutzen der Arbeit für Umwelt und Gesellschaft. Im Fokus stehen Innovationsgrad, die Markt- und Anwendungsnähe sowie eine gut verständliche und überzeugende Darstellung.

In der Kategorie Journalismus ist die mediale Form der eingereichten Arbeit offen: Print, Online, Audio oder Video. Reine Konzepte, Fotoarbeiten und Bücher können jedoch nicht bewertet werden. Die anschauliche und verständliche Wiedergabe eines gesellschaftlich und wissenschaftlich relevanten Themas sowie die Eigenständigkeit und Ausgewogenheit der Stellungnahmen sind wichtige Bewertungskriterien.

Für beide Preiskategorien gilt: Die Arbeiten müssen veröffentlicht sein und sich mit nachhaltigen Themen aus den Bereichen Umwelt-, Verfahrenstechnik oder Energietechnik beschäftigen. Wissenschaftliche Arbeiten dürfen nicht älter als zwei Jahre, journalistische Arbeiten nicht älter als ein Jahr sein. Beide können auf Deutsch oder Englisch eingereicht werden. Bewertet werden publizierte Einzel- und auch Gemeinschaftsarbeiten. Bei Gemeinschaftsarbeiten ist darauf zu achten, dass der Eigenanteil gekennzeichnet ist und die Haupt-Anteilsträgerin bzw. der Haupt-Anteilsträger die Arbeit einreicht.
Die Arbeit einreichen

Bewerbungen sind schnell und unkompliziert über ein Online-Formular möglich. Bewerbungsschluss ist der 29. Februar 2024.

Source:

Fraunhofer UMSICHT

08.12.2023

EURATEX welcomes approval of PanEuroMed rules of origin

EURATEX welcomes the unanimous vote in support of the new rules of origin under the PEM Convention, as a historic achievement. Facilitating trade and investments in the “PanEuroMed” region (covering 27 EU member states and 24 partner countries in the neighbourhood region)1 is top priority region for the EU, as trade with these countries accounted for €677 billion in 2023. For the EU textile and clothing sector, the region represents 35% of its exports and 21% of its imports.
 
In 2013 the European Commission adopted a package of proposals aimed at increasing trade between the European Union and neighbouring countries in the Pan-Euro-Mediterranean (PEM) region. The proposal introduced modernised rules of origin of the PEM convention, lifting the prohibition of duty-drawback and introducing the principle of “full cumulation”.

EURATEX welcomes the unanimous vote in support of the new rules of origin under the PEM Convention, as a historic achievement. Facilitating trade and investments in the “PanEuroMed” region (covering 27 EU member states and 24 partner countries in the neighbourhood region)1 is top priority region for the EU, as trade with these countries accounted for €677 billion in 2023. For the EU textile and clothing sector, the region represents 35% of its exports and 21% of its imports.
 
In 2013 the European Commission adopted a package of proposals aimed at increasing trade between the European Union and neighbouring countries in the Pan-Euro-Mediterranean (PEM) region. The proposal introduced modernised rules of origin of the PEM convention, lifting the prohibition of duty-drawback and introducing the principle of “full cumulation”.

Today, after ten years of intense negotiations which EURATEX supported, the European Commission reached a full and final agreement with all PEM partners. This is a landmark achievement that will unlock the full potential of the Euro-Mediterranean area as the biggest and most integrated region of advanced manufacturing and trading of sustainable textiles and clothing. The rules adopted today will accelerate the integration of T&C supply chains and boost T&C production and trade within the region, both in the East and Southern borders of the EU. In a moment when companies are looking at moving their production from Asia to nearby, like-minded and more reliable countries , it is very timely to have the PEM Convention implemented.

EURATEX’s President, Mr Alberto Paccanelli, commented: “This is a strategic trade deal that can help European companies recover from the multiple crisis which we face since 2020”. He continued “We call on the European Union to not stop here, but keep up the efforts to secure trade deals that are good for European companies and their competitive position in the world. The next objective should be the adoption of the EU-Mercosur Agreement and a conclusive settlement of all trade disputes with the United States”.    
 
According to Director General Dirk Vantyghem, “today’s unanimous vote in favour of the modernised PEM rules is good news for our industry.. We should now engage with these partner countries to fully exploit the potential of these new rules. EURATEX is ready to engage in an industrial dialogue with the companies from the PEM Countries to facilitate their transition to the new framework”.

1 The PanEuroMed contracting parties are: the EU, the EFTA States (Switzerland, Norway, Iceland and Liechtenstein), the Faroe Islands, the participants in the Barcelona Process (Algeria, Egypt, Israel, Jordan, Lebanon, Morocco, the territories of West Bank and Gaza, Syria, Tunisia and Turkey), the participants in the EU's Stabilisation and Association Process (Albania, Bosnia and Herzegovina, the Republic of North Macedonia, Montenegro, Serbia, Kosovo), the Republic of Moldova, Ukraine.

Source:

EURATEX 

Award winners with foundation chairman, foundation MD and professors (c) VDMA e.V. Textile Machinery
Award winners with foundation chairman, foundation MD and professors
08.12.2023

Walter Reiners Foundation honours young engineers

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

This year's promotion award in the Diploma/Master's category, endowed with prize money of 3,500 euros, went to Flávio Diniz from RWTH Aachen. The subject of his Master's thesis was the feasibility of manufacturing ultra-thin carbon fibres.

The award ceremony 2024 will take place in April at the VDMA stand at the Techtextil fair in Frankfurt.

Fraunhofer: "Innovative Citizen" 2023 - Selbst zu Makern werden (c) Fraunhofer UMSICHT
20.11.2023

Fraunhofer: "Innovative Citizen" 2023 - Selbst zu Makern werden

Was ist eine demokratische Technik? Wie können wir technologische Innovationen am besten für selbstbestimmte Lebensstile mitgestalten? Welchen Beitrag können neue Technologien für einen Wandel hin zu mehr Nachhaltigkeit leisten? Diese Fragen und eine Vielzahl an praktischen Workshops, Diskussionen und Vorträgen stehen im Mittelpunkt beim »Innovative Citizen – dem Festival für eine demokratische Technik | make - fab - grow - repair - cycle« am 24. und 25. November in der Werkhalle des Uniongewerbehof in Dortmund. Beim Festival steht vor allem das Kennenlernen und Ausprobieren an erster Stelle. Um Anmeldung zu den Workshops wird gebeten, die Teilnahme ist kostenfrei.

Was ist eine demokratische Technik? Wie können wir technologische Innovationen am besten für selbstbestimmte Lebensstile mitgestalten? Welchen Beitrag können neue Technologien für einen Wandel hin zu mehr Nachhaltigkeit leisten? Diese Fragen und eine Vielzahl an praktischen Workshops, Diskussionen und Vorträgen stehen im Mittelpunkt beim »Innovative Citizen – dem Festival für eine demokratische Technik | make - fab - grow - repair - cycle« am 24. und 25. November in der Werkhalle des Uniongewerbehof in Dortmund. Beim Festival steht vor allem das Kennenlernen und Ausprobieren an erster Stelle. Um Anmeldung zu den Workshops wird gebeten, die Teilnahme ist kostenfrei.

Nach langer Pause ist das »Innovative Citizen Festival« wieder zurück in Dortmund – eine Initiative des Fraunhofer UMSICHT, der Folkwang Universität der Künste und der Dezentrale Dortmund. Zum sechsten Mal dreht sich am 24. und 25. November alles um neue Technologien, nachhaltige Entwicklung und den technikaffinen und gleichzeitig technikkritischen Menschen. Folgende Themen stehen auf dem Programm: Künstliche Intelligenz, Pilzkunde in der Praxis, eine nachhaltige Textilwirtschaft, Prototyping Energiewende, Kunststoffrecycling und Upcycling von Kleidung. Workshops für Kinder sind ebenfalls dabei. Interessierte können selbst zum »Maker« werden, neue Perspektiven für eine nachhaltige und kreative Stadtgemeinschaft kennen lernen oder einfach mitdiskutieren.

Die Veranstalterinnen und Veranstalter sehen das Festival als eine Chance, Forschung und Entwicklung und die Überführung der Ergebnisse in die Praxis als demokratischen Prozess zu nutzen. Menschen sollen an der Entwicklung von Innovationen beteiligt sein, Verantwortung dafür übernehmen und gleichzeitig die Chancen für ein modernes und nachhaltiges Wirtschaften wahrnehmen – z.B. durch Stärkung von lokalen Gemeinschaften.

Source:

Fraunhofer UMSICHT

CHT USA celebrates expansion of its headquarters in Michigan (c) CHT Group
03.11.2023

CHT USA celebrates expansion of its headquarters in Michigan

With a ribbon cutting ceremony on October 24, 2023 CHT USA celebrated the $ 25 million expansion at its US headquarters in Cassopolis, Michigan. More than 100 attendees came to the celebrations, among others officials from local, county and state governments, neighbors, and area business leaders, CHT employees, CTO Dr. Bernhard Hettich as representative of CHT’s Global management team, and members of the press.

In his speech, Dr. Bernhard Hettich, CTO of CHT Group, thanked the local authorities for their business-friendly policies and stated that a development towards sustainability in many areas would not be possible without CHT's silicone products: "With CHT's largest single investment outside Europe, CHT is taking a big step and doubling its silicone production capacity. We intend to use this expansion not only to support our customers in the Americas, but also to leverage the capacity for our global growth. In line with the motto "CHT first", further steps in this direction will follow."

With a ribbon cutting ceremony on October 24, 2023 CHT USA celebrated the $ 25 million expansion at its US headquarters in Cassopolis, Michigan. More than 100 attendees came to the celebrations, among others officials from local, county and state governments, neighbors, and area business leaders, CHT employees, CTO Dr. Bernhard Hettich as representative of CHT’s Global management team, and members of the press.

In his speech, Dr. Bernhard Hettich, CTO of CHT Group, thanked the local authorities for their business-friendly policies and stated that a development towards sustainability in many areas would not be possible without CHT's silicone products: "With CHT's largest single investment outside Europe, CHT is taking a big step and doubling its silicone production capacity. We intend to use this expansion not only to support our customers in the Americas, but also to leverage the capacity for our global growth. In line with the motto "CHT first", further steps in this direction will follow."

For the Cass County site, the approximately 45,000 square feet new facility with 5 reactors and distillation units resulted in an increase in the total area of the company's site to 120,000 square feet. This will then allow sufficient space for additional reactors and downstream processes. The CHT USA site expansion has created approximately 30 highly skilled jobs in the community.

CHT USA’s Regional Sales and Marketing Director NORAM, Matthew Loman hosted the Ribbon Cutting ceremony.

More information:
CHT Group USA silicone
Source:

CHT Group

One-third increase in exhibitors at Cinte Techtextil China 2023 (c) Messe Frankfurt (HK) Ltd
04.10.2023

One-third increase in exhibitors at Cinte Techtextil China 2023

Since the rapid growth brought about by the pandemic, the technical textiles and nonwovens markets are stabilising towards a new normal – one in which technological innovation, sustainable development, and intelligent manufacturing are the most sought-after qualities. Held from 19 – 21 September 2023 at the Shanghai New International Expo Centre, the fair amplified this new industry direction, both through its fringe programme and across the booths of the 40,000 sqm show floor. With a nearly one-third increase from 2021, 467 exhibitors representing 13 countries and regions engaged a significantly international visitor flow, numbering 15,542 total visits from 52 countries and regions. Suppliers showcased up-to-date products for multiple application areas, with various equipment, technical textiles and nonwovens for agriculture, automotive, protective apparel, and medical and hygiene especially prevalent.

Since the rapid growth brought about by the pandemic, the technical textiles and nonwovens markets are stabilising towards a new normal – one in which technological innovation, sustainable development, and intelligent manufacturing are the most sought-after qualities. Held from 19 – 21 September 2023 at the Shanghai New International Expo Centre, the fair amplified this new industry direction, both through its fringe programme and across the booths of the 40,000 sqm show floor. With a nearly one-third increase from 2021, 467 exhibitors representing 13 countries and regions engaged a significantly international visitor flow, numbering 15,542 total visits from 52 countries and regions. Suppliers showcased up-to-date products for multiple application areas, with various equipment, technical textiles and nonwovens for agriculture, automotive, protective apparel, and medical and hygiene especially prevalent.

Speaking at the fair’s close, Ms Wilmet Shea, General Manager of Messe Frankfurt (HK) Ltd, had an optimistic outlook for the future of the sector: “Sustainability and innovation often go hand-in-hand, and walking through the various halls, zones, and pavilions these past few days the evidence for this was widespread. With environmental protection more important than ever, and buyers across application areas increasingly sourcing eco-friendly solutions, our exhibitors were well-placed to meet that demand. This fair is consistently at the leading edge of technological progress, and with the global and domestic markets showing signs of improving further, we are already looking forward to what we can offer at next year’s edition.”  

With many overseas exhibitors making a comeback, this year’s fair was marked by the return of the Taiwan Pavilion and the 40-exhibitor strong European Zone. Beyond the international areas, domestic pavilions were organised by Beijing Guanghua, China Hang Tang Group, Funing, Jiujing, Shenda, Tiantai, Xianto, and Xiqiao, showcasing nonwovens for various sub-sectors, including filtration and medical. Valuable insights were exchanged at multiple fringe events, including the 11th China International Nonwovens Conference, the Advanced Technical Textiles Industry Chain Synergistic Innovation Development Forum, various events covering marine textiles and rope netting, and the “Kingsafe Dangs” National University Students' Nonwovens Development and Applications Showcase. Visitors, meanwhile, were pleased with the innovation on show across the entire platform.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

11.09.2023

Project and technology study: Trends and Design Factors for Hydrogen Pressure Vessels

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.


AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.


AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

The AZL team, renowned for its high reputation in providing market and technology insights as well as developing component and production concepts in the format of Joint Partner Projects seeks for companies along the whole composite value chain interested in further developing their application know how in this economically highly relevant field.

The project will provide an in depth exploration of market insights, regulatory standards, and intellectual property landscapes. Beyond this, there is a dedicated focus on staying updated with state of the art and advancements in design, materials, and man ufacturing techniques.

An integral component of the project involves the creation of reference designs by AZL´s engineering team. The reference designs will encompass a variety of pressure vessel configurations and will consider a diverse range of materials and production concep ts.

With the scheduled project start in October 2023, and a project timeline of approximately nine months, AZL encourages companies active across the composite value chain to participate. Companies interested in participating or seeking further information should reach out directly to the AZL expert team.

Source:

Aachener Zentrum für integrativen Leichtbau

16.06.2023

Techtextil India hosting SITRA’s Expo on Medical Textiles

On the side-lines of the three-day fair, Techtextil India’s 2023 edition scheduled from 12th –14th September, will be hosting SITRA’s Expo on Medical Textiles called MEDITEXTM2023 - an exclusive pavilion that focuses on medical textiles with live demonstrations and high-growth application areas offering a global platform for business opportunities.

On the side-lines of the three-day fair, Techtextil India’s 2023 edition scheduled from 12th –14th September, will be hosting SITRA’s Expo on Medical Textiles called MEDITEXTM2023 - an exclusive pavilion that focuses on medical textiles with live demonstrations and high-growth application areas offering a global platform for business opportunities.

Medical textiles are fabrics that are used in the healthcare industry for a variety of purposes ranging from maintenance of hygiene, prevention/control of infection to saving the life of critically ill patients. In recent years, the demand for medical textiles has been growing in India due to rise in geriatric population, accidents and life style diseases. Besides, various initiatives of Governments, increased awareness about hygiene, medical tourism and advancements in textile technology are driving the growth of medical textile industry in India. According to a report published by Ministry of Textiles on the Indian Technical Textiles market, the market potential of medical textiles market at 5% is valued approximately at USD 1.125 billion in the year 2021-22.
 
SITRA is a Textile Research Association, sponsored by the industry and supported by the Ministry of Textiles (MoT), with the contribution to the textile industry for more than 65 years. Its Centre of Excellence for Medical Textiles, established by MoT in 2008, has been organising MEDITEX - an International Medical Textile Expo cum Conference in 2014 and 2018 respectively. This exclusive fair for medical textiles has been offering a global platform for business opportunities in the varied application of medical textiles which has witnessed a good participation from the industry. For 2023, the expo will be held as a part of Messe Frankfurt India’s Techtextil India 2023.

Target topics based seminars, supported by Ministry of Textiles, Government of India would also be held concurrently along with the exhibition wherein the speakers would be discussing about current and evolving technologies in medical textiles. Stakeholders and visitors to the conference as well as the exhibition would get to witness and benefit from world class, state-of-the-art medical textiles products/machineries and technologies.

Source:

Messe Frankfurt (HK)

(c) TNO/Fraunhofer UMSICHT
02.06.2023

Fraunhofer: New guide to the future of plastics

How does a future-proof, circular and sustainable plastics economy look like? The answer is a balance ranging from plastics reduction to a sustainable use of recyclable plastics. After all, the increasing demand for plastics in high-value applications such as food packaging, car parts or synthetic textiles requires a holistic change. With four strategic approaches, researchers from the German institute Fraunhofer UMSICHT and the Dutch institute TNO now provide insights into how this future scenario could look like in their recently published white paper "From #plasticfree to future-proof plastics". Both organizations also start a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP aimed at removing existing barriers and sharing of promising solutions.

How does a future-proof, circular and sustainable plastics economy look like? The answer is a balance ranging from plastics reduction to a sustainable use of recyclable plastics. After all, the increasing demand for plastics in high-value applications such as food packaging, car parts or synthetic textiles requires a holistic change. With four strategic approaches, researchers from the German institute Fraunhofer UMSICHT and the Dutch institute TNO now provide insights into how this future scenario could look like in their recently published white paper "From #plasticfree to future-proof plastics". Both organizations also start a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP aimed at removing existing barriers and sharing of promising solutions.

Versatile and inexpensive materials with low weight and very good barrier properties: That's what plastics are. In addition to their practical benefits, however, the materials are also associated with a significant share of mankind's greenhouse gas emissions. The production and use of plastics cause environmental pollution and microplastics, deplete fossil resources and lead to import dependencies. At the same time, alternatives - such as glass packaging - could cause even more environmental burden or have poorer product properties.

Researchers from TNO and Fraunhofer UMSICHT have elaborated a white paper that provides a basis for the transformation of plastics production and use. They consider the integration of the perspectives of all stakeholders and their values and the potential of current and future technologies. In addition, the functional properties of the target product, the comparison with alternative products without plastics, and their impact in a variety of environmental, social and economic categories over the entire life cycle are crucial. In this way, a systematic assessment and ultimately a systematic decision as to where we can use, reject or replace plastics can be realized.

Strategies for the Circular Economy
As a result, the researchers describe four strategic approaches for transforming today's largely linear plastics economy into a fully circular future: Narrowing the Loop, Operating the Loop, Slowing the Loop, and Closing the Loop. By Narrowing the Loop, the researchers recommend, as a first step, to reduce the amount of materials mobilized in a circular economy. Operating the Loop refers to using renewable energy, minimizing material losses, and sourcing raw materials sustainably. For Slowing the Loop, measures are needed to extend the useful lifetime of materials and products. Finally, for Closing the Loop, plastics must be collected, sorted and recycled to high standards.

Individual strategies fall under each of the four approaches. While the ones under Operating the Loop (O strategies) should be applied in parallel and as completely as possible. According to the researchers, the decision for the strategies in the other fields (R strategies) requires a complex process: “Usually, more than one R-strategy can be considered for a given product or service. These must be carefully compared in terms of their feasibility and impact in the context of the status quo and expected changes”, explains Jürgen Bertling from Fraunhofer UMSICHT. The project partners have therefore developed a guiding principle for prioritization based on the idea of the waste hierarchy.

A holistic change, as we envision it, can only succeed if science, industry, politics and citizens work together across sectors. “This implies several, partly quite drastic changes at 4 levels: legislation and policy, circular chain collaboration, design and development, and education and information. For instance, innovations in design and development include redesign of polymers to more oxygen rich ones based on biomass and CO2 utilisation. Current recycling technologies have to be improved for high quantity and quality recycling,” explains Jan Harm Urbanus from TNO.

Hands-on platform for cross-sector collaboration
“Therefore, in a next step, TNO and Fraunhofer UMSICHT are building a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP," explains Esther van den Beuken, Principal Consultant from TNO. It will give companies, associations and non-governmental organizations the opportunity to work together on existing barriers and promising solutions for a Circular Plastics Economy. The platform will also offer its members regular hands-on workshops on plastics topics, roundtable discussions on current issues, and participation in multi-client studies on pressing technical challenges. Regular meetings will be held in the cross-border region of Germany and the Netherlands as well as online. The goal is to bring change to the public and industry.

Source:

Fraunhofer UMSICHT

Photo: CHT
26.05.2023

BEZAKTIV ONE: New Reactive dyes range by CHT

  • Reactive dyes for water and energy saving dye processes with significantly shortened process time

BEZAKTIV ONE covers a broad color spectrum with tinctorial very strong dyes. This enables a cost-efficient dye process with significantly less dye and salt. The excellent wash-off behavior allows short rinse cycles at lower temperatures and therefore offers further ecological and economic advantages. The dyes are particularly suitable for durable textiles due to their good multiple wash fastness.

Cellulosic fibers are often dyed with reactive dyes, as these are commercially available in a wide range of colors that result in dyeings with high wash fastness. However, reactive dyeings require a lot of water due to the necessary rinsing processes. Due to increased ecological requirements, the development of energy and water saving processes is not just a trend, but rather a core prerequisite for new dyes.

A minimal number of rinsing baths and generally lower temperatures for dye exhaust, rinsing and soaping contribute to an overall efficient water and energy saving dyeing processes.

  • Reactive dyes for water and energy saving dye processes with significantly shortened process time

BEZAKTIV ONE covers a broad color spectrum with tinctorial very strong dyes. This enables a cost-efficient dye process with significantly less dye and salt. The excellent wash-off behavior allows short rinse cycles at lower temperatures and therefore offers further ecological and economic advantages. The dyes are particularly suitable for durable textiles due to their good multiple wash fastness.

Cellulosic fibers are often dyed with reactive dyes, as these are commercially available in a wide range of colors that result in dyeings with high wash fastness. However, reactive dyeings require a lot of water due to the necessary rinsing processes. Due to increased ecological requirements, the development of energy and water saving processes is not just a trend, but rather a core prerequisite for new dyes.

A minimal number of rinsing baths and generally lower temperatures for dye exhaust, rinsing and soaping contribute to an overall efficient water and energy saving dyeing processes.

BEZAKTIV ONE dyes can be dyed, rinsed and soaped between 40 and 60 °C. Therefore, the BEZAKTIV ONE exhaust dyeing process is significantly shorter compared to conventional reactive dyeing processes, where temperatures between 60 and 98 °C are required. This advantage means savings in process time and higher productivity for the textile dyer.

The advantages become particularly clear when dyeing medium to dark shades with the BEZAKTIV ONE process. Due to the high fixation level in combination with good color build-up dark shades can be matched with lower dye concentrations of BEZAKTIV ONE than with conventional bifunctional reactive dyes. The addition of the auxiliary COTOBLANC SEL in the second soap bath has an additional positive effect, so that a washing process with low water and energy consumption generates excellent wet fastness properties on the textile.

BEZAKTIV ONE Foto: CHT
25.05.2023

BEZAKTIV ONE: Neues Reaktivfarbstoff-Sortiment von CHT

  • Reaktivfarbstoffe für wasser- und energiesparende Färbeprozesse mit stark verkürzten Prozesszeiten

BEZAKTIV ONE deckt ein breites Spektrum an außergewöhnlich starken Farbstoffen ab. Dies ermöglicht kosteneffiziente Färbeprozesse mit weniger Farbstoff und Salz. Das ausgezeichnete Auswaschverhalten ermöglicht kurze Spülprozesse bei tiefer Temperatur und bietet dadurch einen weiteren ökonomischen und ökologischen Vorteil. Die Farbstoffe eignen sich durch ihre gute Mehrfachwaschechtheit besonders für langlebige Textilien.

Zellulosefasern werden häufig mit Reaktivfarbstoffen gefärbt, da diese in einer Vielzahl von Farben kommerziell erhältlich sind und Färbungen mit hoher Waschechtheit ergeben. Reaktivfärbungen benötigen durch die notwendigen Spülprozesse jedoch viel Wasser. Aufgrund der gestiegenen ökologischen Anforderungen ist die Entwicklung energie- und wassersparender Verfahren eine Kernanforderung an neue Farbstoffe.

Eine minimale Anzahl von Spülbädern und generell niedrigere Temperaturen der Färbe-, Spül- und Seifbäder tragen zu effizienten wasser- und energiesparenden Färbeprozessen bei.

  • Reaktivfarbstoffe für wasser- und energiesparende Färbeprozesse mit stark verkürzten Prozesszeiten

BEZAKTIV ONE deckt ein breites Spektrum an außergewöhnlich starken Farbstoffen ab. Dies ermöglicht kosteneffiziente Färbeprozesse mit weniger Farbstoff und Salz. Das ausgezeichnete Auswaschverhalten ermöglicht kurze Spülprozesse bei tiefer Temperatur und bietet dadurch einen weiteren ökonomischen und ökologischen Vorteil. Die Farbstoffe eignen sich durch ihre gute Mehrfachwaschechtheit besonders für langlebige Textilien.

Zellulosefasern werden häufig mit Reaktivfarbstoffen gefärbt, da diese in einer Vielzahl von Farben kommerziell erhältlich sind und Färbungen mit hoher Waschechtheit ergeben. Reaktivfärbungen benötigen durch die notwendigen Spülprozesse jedoch viel Wasser. Aufgrund der gestiegenen ökologischen Anforderungen ist die Entwicklung energie- und wassersparender Verfahren eine Kernanforderung an neue Farbstoffe.

Eine minimale Anzahl von Spülbädern und generell niedrigere Temperaturen der Färbe-, Spül- und Seifbäder tragen zu effizienten wasser- und energiesparenden Färbeprozessen bei.

BEZAKTIV ONE Farbstoffe können zwischen 40 und 60 °C gefärbt, gespült und geseift werden. Daher ist der Ausziehfärbeprozess im Vergleich zu herkömmlichen Reaktivfärbeverfahren, bei denen Temperaturen zwischen 60 und 98 °C erforderlich sind, deutlich kürzer. Dieser Vorteil bedeutet für den Textilfärber Einsparungen bei der Prozesszeit und eine höhere Produktivität.

Besonders deutlich werden die Vorteile des Verfahrens bei mittleren bis dunklen Farbtönen. Durch die Kombination von hohem Fixiergrad und gutem Farbaufbau können insbesondere dunkle Nuancen mit geringeren Farbstoff-Einsatzmengen als mit herkömmlichen bifunktionellen Reaktivfarbstoffen erreicht werden. Durch die Zugabe des Hilfsmittels COTOBLANC SEL im zweiten Seifbad ergibt sich ein zusätzlicher positiver Effekt, so dass ein Waschprozess mit geringem Wasser- und Energieaufwand zu hervorragenden Nassechtheiten auf dem Textil führt.

Source:

CHT

24.05.2023

SGL Carbon SE: Annual General Meeting 2023

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

After 14 years on the Supervisory Board of SGL Carbon, this was Dr. h.c. Susanne Klatten's last Annual General Meeting as Chairwoman of the Supervisory Board. She had already informed the Company on February 14, 2023, that she would be leaving the Board at the end of this Annual General Meeting. As the largest shareholder, Dr. h.c. Klatten will remain associated with SGL Carbon through SKion GmbH.

As proposed, the Annual General Meeting elected Prof. Dr. Frank Richter as a shareholder representative on the Supervisory Board to succeed Dr. h.c. Susanne Klatten. Following the Annual General Meeting, the constituent meeting of the Supervisory Board elected Prof. Dr. Richter as Chairman of the Supervisory Board. Prof. Dr. Richter is Managing Director of SKion GmbH, Bad Homburg, which holds a stake of approximately 28.55% in SGL Carbon SE. Furthermore, Ingeborg Neumann, Managing Partner of Peppermint Holding GmbH, Berlin, was elected to the Supervisory Board of SGL Carbon SE for a further term of office.

Source:

SGL Carbon SE

(c) CHT Group
12.05.2023

CHT Group: New production facility in Bangladesh

Die CHT Group, a worldwide company for chemical specialties, has built a new production facility in Meghna Industrial Economic Zone (MIEZ), Narayanganj which was inaugurated on May 9th, 2023.

Martin Stangs, Regional Sales Manager APAC Auxiliaries at CHT says: “The long-term success story with RH Corporation now comes to an even higher level. In addition to the decade-long service provided by motivated colleagues of RH Corporation and constant visits by well-experienced CHT application field colleagues, CHT products will now be made available locally by our new production facility at CHT Bangladesh. This will further enhance our current high-end offer with in-time deliveries which are now possible. The well-known services provided by our up-to-date laboratory facility in Dhaka will continue to prevail. This is all supported by the profound analytical and technical equipment at CHT Germany as well as CHT Switzerland. Less water, less energy, less time, but still “fit-for-purpose performance”: these requirements are no strangers to us. In alignment with our CHT Group policy ‘We take care’, we will solve these problems, too”.

Die CHT Group, a worldwide company for chemical specialties, has built a new production facility in Meghna Industrial Economic Zone (MIEZ), Narayanganj which was inaugurated on May 9th, 2023.

Martin Stangs, Regional Sales Manager APAC Auxiliaries at CHT says: “The long-term success story with RH Corporation now comes to an even higher level. In addition to the decade-long service provided by motivated colleagues of RH Corporation and constant visits by well-experienced CHT application field colleagues, CHT products will now be made available locally by our new production facility at CHT Bangladesh. This will further enhance our current high-end offer with in-time deliveries which are now possible. The well-known services provided by our up-to-date laboratory facility in Dhaka will continue to prevail. This is all supported by the profound analytical and technical equipment at CHT Germany as well as CHT Switzerland. Less water, less energy, less time, but still “fit-for-purpose performance”: these requirements are no strangers to us. In alignment with our CHT Group policy ‘We take care’, we will solve these problems, too”.

Sustainability is anchored at CHT Group and plays an important role in Bangladesh, too. The new facility of the CHT Group in Bangladesh contributes to sustainability in more ways: The roofs of two buildings are fully covered with solar photovoltaic modules. For a proper use of natural light all the other buildings have periphery glass and transparent roofs There are additionally a ground water tank to harvest rainwater as well as a biological effluent treatment plant to reuse treated water as process water in the plant.

Source:

CHT Germany GmbH

05.05.2023

XORELLA at ITMA 2023

At ITMA 2023, XORELLA, a specialist in steam setting and conditioning equipment for yarns and fabrics, will launch XO AUTOMATION for the double door XO SELECT conditioning machine series, and XO SOLID, a new machine series to complement XO SMART, XO TREND and XO SELECT machines.

XO AUTOMATION
The new XO AUTOMATION system consists of roller conveyor systems for loading and unloading two-door XO Select conditioning machines. Additional pallet wrapping machine with a turntable, weighting station, label printer, safety fence and security system can complete the system. The XO Select controller and automation system can handle and store individual customer-specific material and packing programmes.  

XO SELECT and XO AUTOMATION are designed for yarn steaming on multiple pallet dimensions and heights up to 2,650mm. The linear material flow passing conveyor and steaming machine avoids any mix between steamed and un-steamed materials. XO AUTOMATION fills the gap between the XO automated moving platform and the fully automated transport system – from spinning hall to warehouse.

At ITMA 2023, XORELLA, a specialist in steam setting and conditioning equipment for yarns and fabrics, will launch XO AUTOMATION for the double door XO SELECT conditioning machine series, and XO SOLID, a new machine series to complement XO SMART, XO TREND and XO SELECT machines.

XO AUTOMATION
The new XO AUTOMATION system consists of roller conveyor systems for loading and unloading two-door XO Select conditioning machines. Additional pallet wrapping machine with a turntable, weighting station, label printer, safety fence and security system can complete the system. The XO Select controller and automation system can handle and store individual customer-specific material and packing programmes.  

XO SELECT and XO AUTOMATION are designed for yarn steaming on multiple pallet dimensions and heights up to 2,650mm. The linear material flow passing conveyor and steaming machine avoids any mix between steamed and un-steamed materials. XO AUTOMATION fills the gap between the XO automated moving platform and the fully automated transport system – from spinning hall to warehouse.

XO SOLID
The new cubical XO SOLID combines a high loading space of 1,800mm x 1,700mm x 4, 000mm (H x W x L) through double row pin trolleys or pallets for easy manual loading of six units on floor level without a pit or platform. XO SOLID is therefore designed for installations on upper floor levels. The new frame design combines all necessary components factory preinstalled on a single frame, for easy ‘plug and play’ installation at the customer site. Additional smaller steamer dimensions for two and four loading units are also at the planning stage.

The new XO SOLID incorporates all the renowned features of XORELLA machines based on the long term experience in high temperature dyeing vessel production of FONG’s, including:

  • A Siemens controller with OPC UA interface and XO data tool for batch storage.
  • A XO EcoPac waterless claw pump or two-stage water ring vacuum pump.
  • A high energy efficient accumulator for steam, electric and combined heating.
  • Vessel and piping in world-class stainless steel.
  • European key components such as pumps, heating elements, valves and sensors

Established in Switzerland in 1967, XORELLA became known in the global textile industry for its innovative indirect steaming system. Since 2002 the company has been a member of the CHTC Fong’s International Group, and a member of SINOMACH Group (China National Machinery Industry Corporation) since 2019.

More information:
XORELLA ITMA ITMA 2023
Source:

XORELLA

30.12.2022

Composites United declares membership in Composites Germany

Society and the economy are facing existential challenges. In addition to the consequences of climate change, these include the realisation that energy and many resources are no longer available in the usual quantities, so that their efficiency must be significantly increased in the short term. Lightweight construction, especially with fibre composite materials, can and will make an important contribution here, e.g. in wind power plants or hydrogen storage systems. As an umbrella organisation, Composites Germany represents the capabilities and interests of the German fibre composite industry. With the re-entry of Composites United, Composites Germany will combine the forces of the two leading composites networks in Germany and its position will be significantly strengthened. Changed framework conditions make the re-entry possible and necessary.

Society and the economy are facing existential challenges. In addition to the consequences of climate change, these include the realisation that energy and many resources are no longer available in the usual quantities, so that their efficiency must be significantly increased in the short term. Lightweight construction, especially with fibre composite materials, can and will make an important contribution here, e.g. in wind power plants or hydrogen storage systems. As an umbrella organisation, Composites Germany represents the capabilities and interests of the German fibre composite industry. With the re-entry of Composites United, Composites Germany will combine the forces of the two leading composites networks in Germany and its position will be significantly strengthened. Changed framework conditions make the re-entry possible and necessary.

VDMA and Leichtbau BW will continue to support the work of Composites Germany as associate members and contribute the know-how of their members. Together, the organisations will promote sustainable lightweight construction as a key technology for Germany, focusing on composites materials, says Prof. Klaus Drechsler of Composites United, one of the two board members of Composites Germany. As a network and mouthpiece of the composites industry, Composites Germany bundles the interests of its members. The aim is to continuously expand activities, promote innovations and technologies, develop new markets and new value chains, and anchor training and further education, adds his board colleague Dr Michael Effing of AVK. The agreement was concluded on 29 November 2022 during the JEC Forum DACH in Augsburg, where both associations were cooperation partners of the event.

Source:

Composites Germany

08.12.2022

Fraunhofer CCPE Summit 2023 für eine zirkuläre Kunststoffwirtschaft

Unter dem Motto »Get into the loop« trifft sich am 8. und 9. Februar 2023 beim Fraunhofer CCPE Summit erstmalig eine internationale Circular Economy Gemeinschaft unter der Leitung von UMSICHT-Institutsleiter Prof. Manfred Renner in München. Es ist der Startschuss für ein internationales Forum, das den Austausch von Lösungsideen und Innovationen für eine zirkuläre Kunststoffwirtschaft fördert. Sechs Fraunhofer-Institute widmen sich seit rund vier Jahre im Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE der Frage, wie die Wertschöpfungskette von Kunststoff zirkulär gestaltet werden kann.

Unter dem Motto »Get into the loop« trifft sich am 8. und 9. Februar 2023 beim Fraunhofer CCPE Summit erstmalig eine internationale Circular Economy Gemeinschaft unter der Leitung von UMSICHT-Institutsleiter Prof. Manfred Renner in München. Es ist der Startschuss für ein internationales Forum, das den Austausch von Lösungsideen und Innovationen für eine zirkuläre Kunststoffwirtschaft fördert. Sechs Fraunhofer-Institute widmen sich seit rund vier Jahre im Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE der Frage, wie die Wertschöpfungskette von Kunststoff zirkulär gestaltet werden kann.

350 Millionen Tonnen Kunststoff werden weltweit in einem Jahr produziert. Damit dadurch nicht auch gleichzeitig 350 Millionen Tonnen Müll entstehen, kann eine Kreislaufwirtschaft diese Kunststoffe im Kreis führen und so Ressourcen und Umwelt schonen. Dieser Wandel zu einer zirkulären Kunststoffwirtschaft benötigt systemische, technische und soziale Innovationen. Zwei Tage lang stellen internationale Expertinnen und Experten sowie die Forschenden der sechs Mitgliedsinstitute im Munich Marriot Hotel in München dazu Strategien, Forschungsergebnisse und Umsetzungsprojekte vor. Das Ziel dabei: Den Wandel zu einer zirkulären Kunststoffwirtschaft mit Präsentation und internationalen Diskussionen beschleunigen.

(c) artventure/artventure app, Avenir Garment/Christopher Blank, BEAWEAR/Claudia Wild, Gratitude Verlag/Christoph Mannhardt, cre[ai]tion/Livia Eichenberger, DIVE/DIVE, Eye-Able/privat, faircado/Mario Heller, Jünglinge Film/Frangipani Beatt, What a View Studios/What a View Studios, klaep/Andreas Schweizer Photography, GURLZ WITH CURLZ/GURLZ WITH CURLZ, FettFressHair/Anne Junka, FindUs/FindUs, FEAT Boddies helpwear/privat, Fashion Africa Now/privat, Re-Shirt/Alexander Fthenakis, Ladies&Ladys Label/Felix Schmale 2021, LOKK/LOKK, mujō/mujō, Off the Beaten Track/privat, macht.sprache/Patricia Escriche/Marcus Wend, &töchter/Studio Seidel, Made by Black Excellence/maxsonmedia, connactz/Johann Angermann & Andi Dobner, The Changency/Nadine Kunath, Vorkoster/privat, Storydive/Larissa Mantel, Kopftuchmädchen/Barbara Dietl, Revoltech/Jan Schölzel, Netzwerk für Schwarze Kinderbuchautorinnen: Fafalag/Nathalie Lieckfeld, rrreefs/Leila Tazi
06.12.2022

Projekte mit Fokus Mode und Textilien als Kultur- und Kreativpilot*innen 2022 ausgezeichnet

Es sind Projekte mit Wirkung in Zeiten des Wandels – das verbindet die Titelträger*innen der Kultur- und Kreativpilot*innen miteinander. Jedes der 32 ausgezeichneten Projekte fokussiert sich darauf, Lösungen zu finden, die eine gesellschaftliche Transformation mit kreativer Kraft gestalten – und dabei unternehmerisch erfolgreich sind. Mit der Auszeichnung würdigt die Bundesregierung bereits zum dreizehnten Mal die innovativsten Unternehmer*innenpersönlichkeiten der Kultur- und Kreativwirtschaft in Deutschland.

Claudia Roth, Staatsministerin für Kultur und Medien, betont, dass für die vollständige Entfaltung des gesellschaftlichen und wirtschaftlichen Potenzials die Kultur- und Kreativwirtschaft in ihrer Arbeit unterstützt und ermutigt werden muss: „Die diesjährigen Titelträger*innen zeigen, dass die Branche gesellschaftliche Verantwortung in all ihren Facetten übernimmt und Lösungen für soziale Missstände bietet. Damit diesen zukunftsweisenden Ideen alle Türen offenstehen, müssen wir den kreativen Köpfen in Deutschland Rückenwind geben und sie auf ihrem unternehmerischen Weg begleiten.“

Es sind Projekte mit Wirkung in Zeiten des Wandels – das verbindet die Titelträger*innen der Kultur- und Kreativpilot*innen miteinander. Jedes der 32 ausgezeichneten Projekte fokussiert sich darauf, Lösungen zu finden, die eine gesellschaftliche Transformation mit kreativer Kraft gestalten – und dabei unternehmerisch erfolgreich sind. Mit der Auszeichnung würdigt die Bundesregierung bereits zum dreizehnten Mal die innovativsten Unternehmer*innenpersönlichkeiten der Kultur- und Kreativwirtschaft in Deutschland.

Claudia Roth, Staatsministerin für Kultur und Medien, betont, dass für die vollständige Entfaltung des gesellschaftlichen und wirtschaftlichen Potenzials die Kultur- und Kreativwirtschaft in ihrer Arbeit unterstützt und ermutigt werden muss: „Die diesjährigen Titelträger*innen zeigen, dass die Branche gesellschaftliche Verantwortung in all ihren Facetten übernimmt und Lösungen für soziale Missstände bietet. Damit diesen zukunftsweisenden Ideen alle Türen offenstehen, müssen wir den kreativen Köpfen in Deutschland Rückenwind geben und sie auf ihrem unternehmerischen Weg begleiten.“

Trendanalyse 2022: Missionsorientierung der Kultur- und Kreativwirtschaft nimmt zu
Die Wirkungsorientierung der 32 Titelträger*innen ist Ausdruck eines Trends in der Kultur- und Kreativwirtschaft. Das zeigt die Auswertung der 700 Bewerbungen in diesem Jahr, die das inotiv-Netzwerk gemeinsam mit den Zukunftsforscher*innen von Third Wave durchgeführt hat. „Jede siebte Projekt-Einreichung formuliert eine präzise Mission, die immer auch eine klare Weltverbesserungsabsicht beinhaltet. Das jeweilig vorgestellte Projekt belegt die Mission faktisch und konkret. Ein solch ansteigender Verbreitungsgrad aktiver Zukunftsgestaltung kann doch nur Hoffnung stiften!“, sagt Zukunftsforscher Jonas Drechsel.

Die diesjährigen Titelträger*innen mit Fokus Mode und Textilien (alphabetische Auflistung)
Avenir Garment

Mit Avenir Garment will der gebürtige Tunesier Aladin Amiri die Zukunft der Mode mit kreativer Streetwear mitgestalten, sie mit sozialer und ökologischer Nachhaltigkeit paaren und Vorreiter einer Modeindustrie sein, die divers, kreativ und verantwortungsbewusst ist. Sein Ziel ist es, Ressourcen, Beratung und Unterstützung zu bieten, um die Visionen junger Kreativer umzusetzen. Ebenso im Fokus stehen die soziale Verantwortung für Produzent*innen in Tunesien, denen faire Löhne und hohe Arbeitsstandards geboten werden sowie die Möglichkeit für tunesische Kreative, ihre Botschaft nach Deutschland zu bringen. Zudem startet Avenir Garment ein Upcycling-Programm, in dem Künstler*innen aus nicht verkauften Textilien neue Produkte schaffen, die kreativ und einzigartig sind.

Fashion Africa Now
Fashion Africa Now ist ein digitaler Informationsraum und ein zukunftsorientiertes interdisziplinäres Netzwerk für Kreative aus Deutschland und Europa, der afrikanischen Diaspora und Afrika, das mit Stereotypen bricht, BIPoC-Perspektiven Raum gibt und neue Narrative erzählt. Das Team von Fashion Africa Now bringt Kreative, Experten*innen und Unternehmen zusammen und kreiert Ausstellungen, Workshops, Podcasts, Mode-Kooperationen, Veranstaltungen und ein Magazin, das sich auch gesellschaftspolitischen Themen widmet – mit der Vision einer aufklärenden, nachhaltigeren und inklusiven Zukunft in der Kreativ- und Modebranche. Fashion Africa Now schafft Sichtbarkeit für marginalisierte Kreativschaffende und repräsentiert die komplexe und vielfältige Welt des afrikanischen Modedesigns.

FEAT Boddies helpwear
„Ich fühl mich wohl in meiner Haut“: FEAT Boddies helpwear möchte funktionale und dabei optisch ansprechenden Textilien für alle Körper entwickeln, die ihre Träger*innen versteht und dabei sanft zu Haut und Körper ist. Das erste Produkt sind LUGGERS, hautfreundliche Oberschenkelbänder, die lästiges Aneinanderreiben vermeiden. Wichtig ist den Gründerinnen dabei, auf Materialien zu setzen, die die Umwelt schonen. Entsprechend verwenden sie nach Möglichkeit recycelte Materialien und lassen Luggers unter fairen Bedingungen in Europa herstellen.

FettFressHair
In deutschen Friseursalons fallen jährlich ca. 40.000 Kubikmeter Haarschnitt an – oder anders ausgedrückt: 222.222 Badewannen voller Haare. Ein Rohstoff, der weltweit ständig nachwächst und bisher im Restmüll landet, obwohl er eigentlich Gutes für die Umwelt tun könnte. Denn: Haare sind lipophil, lieben also Fett und fressen es förmlich auf. Somit eignen sie sich bestens, um Verunreinigungen im Wasser aufzunehmen. Das macht sich FettFressHair zunutze und baut aus dem anfallenden Haarschnitt innovative Schadstoffsammler in Form von Schlängeln, Matten und Vliesen. Auf diese Weise können sie Öle und andere Verunreinigungen aus allen Gewässern filtern. Die Erkenntnisse des Kieler Teams halfen beispielsweise schon den Einsatzkräften in Lima dabei, bei der Beseitigung der Ölkatastrophe im Januar 2022 effektiv zu reagieren. Über die Nutzung im Wasser hinaus prüft das Team stetig neue Einsatzgebiete. So wird aus Abfall Umweltschutz.

Re-Shirt
Was wäre, wenn man Textilien nur kurzfristig bedrucken könnte? Dann würde bei großen Veranstaltungen viel weniger Textilmüll entstehen und sehr viel Wasser gespart werden – 300 Liter für jedes nicht neu produziertem T-Shirt. Deswegen haben Emmy Schumacher und Anna Hadzelek Re-Shirt entwickelt, die erste temporäre Textildrucktechnik. Damit schlagen die beiden Gründerinnen die Brücke zwischen schnelllebigem Gestaltungsbedürfnis und Ressourcen schonendem Mindset.

Revoltech
LOVR – unter diesem Akronym („lederähnlich, ohne Plastik, vegan, reststoffbasiert“) hat Revoltech ein nachhaltiges Textil entwickelt, das aussieht wie Leder und sich auch so anfühlt. Es ist zudem verformbar und abriebfest sowie biologisch abbaubar und recyclingfähig. Das Beste: LOVR hat einen minimalen ökologischen Fußabdruck, da nur 0,3 Prozent der CO2-Emissionen im Vergleich zur Lederherstellung anfallen und auf Chemikalien und Kunststoffe verzichtet wird. Hergestellt wird die Alternative zum tierischen Produkt aus den Nebenprodukten des deutschen Hanfanbaus und pflanzlichen Zusatzstoffen.

Source:

u-institut für unternehmerisches Denken und Handeln e.V. │Kultur- und Kreativpiloten Deutschland

(c) POLARYSE
18.11.2022

Grand Largue Composites and Sicomin enable flax-fibre-built Racing Yacht

Fibres, fabrics, epoxy resins and adhesives from Sicomin have been used by Grand Largue Composites (GLC) to construct the first Class40 racing yacht to feature a significant quantity of flax-fibre reinforcements.
The yacht, called Crosscall, won the Class40 World Championships in June 2022 and is a prototype of the new Lift V2 design by Marc Lombard, one of the leading naval architects in this field.

Class40 is one of the most competitive fleets in yacht racing. The hulls of Class40 yachts must be light in weight, strong and stiff, and durable in the most extreme of conditions. Furthermore, to keep costs down, they cannot be reinforced with carbon fibres. The quality and reliability of the resins used for the infusion and lamination of the hulls are therefore of paramount importance.

Fibres, fabrics, epoxy resins and adhesives from Sicomin have been used by Grand Largue Composites (GLC) to construct the first Class40 racing yacht to feature a significant quantity of flax-fibre reinforcements.
The yacht, called Crosscall, won the Class40 World Championships in June 2022 and is a prototype of the new Lift V2 design by Marc Lombard, one of the leading naval architects in this field.

Class40 is one of the most competitive fleets in yacht racing. The hulls of Class40 yachts must be light in weight, strong and stiff, and durable in the most extreme of conditions. Furthermore, to keep costs down, they cannot be reinforced with carbon fibres. The quality and reliability of the resins used for the infusion and lamination of the hulls are therefore of paramount importance.

Crosscall's cockpit was designed to be effectively non-structural, with the mainsheet, which can generate huge shock loads, supported separately. This would allow the cockpit to be made from a hybrid biaxial fabric comprising 50% flax fibres. Other parts of the boat that incorporate flax fibre include the tunnel, the engine cover, the ballast tanks and the cap. The rest of the boat is reinforced with 100% glass-fibre fabrics.

To help it realise this ambitious design, GLC, an infusion specialist, turned to its long-time material supplier, Sicomin. The hull was moulded and infused in one piece and the deck – including the hybrid flax-fibre cockpit – was also infused as a single part. The internal structure was then laminated into the hull by hand before the hull and deck were finally bonded together.

The infusion resin selected was Sicomin’s SR 1710, a high-modulus structural epoxy. Designed specifically for use in infusion and injection processes, it has exceptionally low viscosity and its low-reactivity hardener makes it suitable for the production of large parts. Composites components made from SR 1710 possess high interlaminar shear-strength and the resin retains its mechanical properties in wet environments.

Sicomin’s low-toxicity SR 8200 was used to laminate the internal structures onto the skin of the hull. Ideal for hand laminating, this system includes a choice of hardeners with a wide range of reactivities, which makes it equally suitable for making large or small parts. The hull and deck were joined together with Sicomin’s Isobond SR 7100, which demonstrates high fatigue strength and is very resistant to microcracking.

An epoxy bonding primer – called Undercoat EP 215 HB+ and supplied by Sicomin’s sister company, Map Yachting – was applied to the moulds first to make demoulding easier. It also serves as an undercoat in the polyurethane exterior paint system that is used instead of gelcoat to protect the epoxy hull from UV damage.

Since the launch of Crosscall, GLC has started building a second Lift V2 Class40 and a third one is now planned, both for which Sicomin will supply the materials.

Source:

Sicomin / 100% Marketing