From the Sector

Reset
48 results
Baldwin presents spray finishing system at Techtexil (c) Baldwin Technology Company Inc.
13.03.2024

Baldwin presents spray finishing system at Techtexil

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

With Baldwin’s system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.
 
Furthermore, the system offers automated speed tracking, fabric-width compensation, and real-time monitoring to track system uptime, performance and chemistry usage, as well as active care alerts.
 
In addition, the TexCoat™ G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water repellents, softeners, antimicrobials, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, and no special auxiliaries are required. The recipe is adjusted by increasing the concentration and reducing the pickup by a corresponding amount, so that the same level of solids is applied.
 
Some applications, such as durable water repellents, are only applied on the face of the fabric, instead of the traditional method of saturation through dipping and squeezing. Drier fabric entering the stenter means lower drying temperatures and faster process speeds. Single-side applications also open up the opportunity to process back-coated or laminated fabrics in a single pass of the stenter, instead of two passes.

14.09.2023

Rudolf commissions Baldwin’s TexCoat™ G4 lab-scale precision spray unit

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

The new TexCoat lab-scale unit at Rudolf’s Geretsried, Germany-based Customer Solution Center, tests the sprayability of chemicals on fabrics as an additional tool to help the market transition to precision spray with confidence in the performance and sustainability of the end result.
 
With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates.
 
Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry. On wet-on-dry processes, the finish is applied with 50% of the amount of water required for pad finishing. Dryer fabric entering the stenter means less water to evaporate resulting in less energy and higher production speeds.
 
More specifically, with Baldwin’s TexCoat G4, textile finishers can track and control the finishing process. Changeovers are quickly performed thanks to recipe management, including automated chemistry and coverage selection. Furthermore, the system takes speed information from the drying process to insure exact coverage regardless of any change in speed. TexCoat G4 measures every drop of chemical usage ensuring that the amount of chemical add-on is precise.
 
In addition, the TexCoat G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water-repellants including PFAS-free, softeners, anti-microbials, easy care resins, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, with no special auxiliaries required.

Source:

Baldwin Technology Company Inc.

15.03.2023

World of Wipes® (WOW) Program Announced

INDA announced the program for the World of Wipes® (WOW) International Conference, July 17-20, Atlanta, Georgia. Key topics include: Plastics policy: closing the “intention-action” gap, sustainable manufacturing practices, what consumers think about sustainability and how they are driving cultural change, supply chain transparency, wipes advancements, flushability developments, and a special CEO panel sharing their organizations’ approach to inflation, supply chain challenges, and capacity/demand balance.

Among the leading organizations presenting at this year’s event are: Berry Global, Birla Cellulose, Bringabouts, Bureau Veritas, Diamond Wipes, Freudenberg Performance Materials, Glatfelter, Goodwipes, Kimberly-Clark Corporation, National Cotton Council, Mango Consulting, Plastics Industry Association, Rockline Industries, Sharon Laboratories, and Trützschler Nonwovens. Program and speaker details are available on the WOW website.

INDA announced the program for the World of Wipes® (WOW) International Conference, July 17-20, Atlanta, Georgia. Key topics include: Plastics policy: closing the “intention-action” gap, sustainable manufacturing practices, what consumers think about sustainability and how they are driving cultural change, supply chain transparency, wipes advancements, flushability developments, and a special CEO panel sharing their organizations’ approach to inflation, supply chain challenges, and capacity/demand balance.

Among the leading organizations presenting at this year’s event are: Berry Global, Birla Cellulose, Bringabouts, Bureau Veritas, Diamond Wipes, Freudenberg Performance Materials, Glatfelter, Goodwipes, Kimberly-Clark Corporation, National Cotton Council, Mango Consulting, Plastics Industry Association, Rockline Industries, Sharon Laboratories, and Trützschler Nonwovens. Program and speaker details are available on the WOW website.

Two new features at WOW this year are Lightning Talks and Lunch Around. Lightning Talks are an opportunity for tabletop exhibitors to highlight their innovations in “supersized elevator speeches” to WOW participants. Lightning Talks will take place before the tabletop exhibits open Tuesday and Wednesday evenings. The Lunch Around opportunity connects participants and thought leaders from the wipes industry at select downtown Atlanta restaurants on Tuesday and Wednesday. Space is limited and is first-come, first-served.

WOW kicks off with the WIPES Academy, a comprehensive course including elements of market research, materials, chemistry, converting, and regulatory filing. This course has been redeveloped to include all aspects of wipes development from concept to commercialization. The WIPES Academy is led by Heidi Beatty, Chief Executive Officer, and Paul Davies, Ph.D., Consultant, Crown Abbey LLC. Ms. Beatty and Mr. Davies bring decades of practical experience to give participants real-world solutions for product development challenges and tools to improve processes.

(c) STFI HiPeR_Integral RTM rib
09.03.2023

STFI mit textilem Leichtbau und Textilrecycling auf der JEC

Vom 25. bis zum 27. April 2023 findet die diesjährige JEC WORLD, die international führende Leichtbaumesse, in Paris statt. Das Sächsische Textilforschungsinstitut e.V. (STFI) wird seine jüngsten Innovationen aus dem textilen Leichtbau und dem Textilrecycling auf dem Stand der sächsischen Wirtschaftsförderung präsentieren. Das STFI fokussiert seinen Messeauftritt in Paris dieses Jahr vor allem auf erfolgreiche Beispiele aus Industriekooperationen, die zur Nachhaltigkeit des Herstellungsprozesses beitragen.

Im Forschungsvorhaben „optiformTEX“ innerhalb des BMBF-Förderprogramms „Zwanzig20 – futureTEX“ wurde eine neue Technologie für flächige Naturfaser (NF)-Halbzeuge mit belastungsgerechter topologischen Fasermasseverteilung entwickelt. Dies lässt eine signifikante Gewichtsreduzierung von bis zu 30 % bei Leichtbauteilen vor allem im automobilen Interieur zu.

Vom 25. bis zum 27. April 2023 findet die diesjährige JEC WORLD, die international führende Leichtbaumesse, in Paris statt. Das Sächsische Textilforschungsinstitut e.V. (STFI) wird seine jüngsten Innovationen aus dem textilen Leichtbau und dem Textilrecycling auf dem Stand der sächsischen Wirtschaftsförderung präsentieren. Das STFI fokussiert seinen Messeauftritt in Paris dieses Jahr vor allem auf erfolgreiche Beispiele aus Industriekooperationen, die zur Nachhaltigkeit des Herstellungsprozesses beitragen.

Im Forschungsvorhaben „optiformTEX“ innerhalb des BMBF-Förderprogramms „Zwanzig20 – futureTEX“ wurde eine neue Technologie für flächige Naturfaser (NF)-Halbzeuge mit belastungsgerechter topologischen Fasermasseverteilung entwickelt. Dies lässt eine signifikante Gewichtsreduzierung von bis zu 30 % bei Leichtbauteilen vor allem im automobilen Interieur zu.

Es entstand das Modul „3D-Lofter“ zur lokalen Verstärkung von Vliesstoffen mittels definierter Faseranhäufungen; entwickelt und gebaut durch den Projektpartner Oskar Dilo Maschinenfabrik KG, Eberbach. Ein Exemplar des Moduls wurde in eine Labornadelvliesstoffanlage im Technikum des STFI integriert und steht für Kundenversuche sowie nachfolgende Forschungsvorhaben zur Verfügung.

Im Ergebnis des internationalen BMBF-Vorhabens „HiPeR – Orientierte Carbonfaserstrukturen aus Luftfahrt-Produktionsabfällen zum Wiedereinsatz im Flugzeug“ entstand ein Strukturbauteil für die Luftfahrt aus Recycling-Carbon. Dafür wurden am STFI rCF-Tapes sowohl aus recoverten, mechanisch aufbereiteten Abfällen als auch aus pyrolysierten Fasern entwickelt. Die rCF-Tapes werden auf dem STFI-Stand, das Bauteil selbst am CU-Messestand/CTC präsentiert.

16.11.2022

AkzoNobel launches sustainable biocide-free range for boaters

Recreational boaters now have an easy way to be more sustainable following the introduction of a new biocide-free (B-Free) fouling control range from AkzoNobel’s Yacht Coatings business.

The first product to be launched from the new B-Free range is B-Free Explore. It features a specially-developed, unique silicone polymer technology which produces an exceptionally smooth and slick hull – helping to reduce drag.

Fouling is controlled by preventing microorganisms such as barnacles, slime and algae from forming strong bonds with the hull of the boat. Any that do adhere can be simply wiped away by hand or water jet.

“We’ve developed high-performance technology which allows boaters to maintain a clean, smooth hull,” explains Simon Parker, Director of AkzoNobel’s Marine and Protective Coatings business. “It’s based on proven technology and exemplifies the restless spirit of innovation which has been the cornerstone of our International brand for more than 140 years.”

Recreational boaters now have an easy way to be more sustainable following the introduction of a new biocide-free (B-Free) fouling control range from AkzoNobel’s Yacht Coatings business.

The first product to be launched from the new B-Free range is B-Free Explore. It features a specially-developed, unique silicone polymer technology which produces an exceptionally smooth and slick hull – helping to reduce drag.

Fouling is controlled by preventing microorganisms such as barnacles, slime and algae from forming strong bonds with the hull of the boat. Any that do adhere can be simply wiped away by hand or water jet.

“We’ve developed high-performance technology which allows boaters to maintain a clean, smooth hull,” explains Simon Parker, Director of AkzoNobel’s Marine and Protective Coatings business. “It’s based on proven technology and exemplifies the restless spirit of innovation which has been the cornerstone of our International brand for more than 140 years.”

Adds Jemma Lampkin, Global Commercial Director for AkzoNobel’s Yacht Coatings business: “Boaters are becoming more aware of the impact they can have on the environment, but they still require technologies that deliver high-performance fouling control. B-Free Explore provides a stand-out solution for both of these challenges.”

Specially crafted for the leisure boat market, B-Free Explore is the culmination of a five-year development program. It can be applied to new hulls or directly to existing antifouling, without the need for the removal of the previous antifouling coating. This makes it simple for boaters to upgrade from their traditional coatings to the new technology.

The new product is also better for the marine ecosystem. Being biocide-free, it provides a smooth surface for improved hull efficiencies, which can lead to a reduced carbon footprint.

Currently being introduced in Northern Europe, B-Free Explore will be rolled out across Germany, the Netherlands, Norway and Sweden in January 2023.

More information:
AkzoNobel Coatings Polymere
Source:

AkzoNobel

10.11.2022

INDA Call for Abstracts for World of Wipes® International Conference

INDA’s 17th annual World of Wipes® (WOW) International Conference is accepting abstracts through December 2, 2022, on innovative, inspiring, and informative wipe products, markets and technologies to be presented in Atlanta, GA, July 17-20, 2023.

Experts in the areas of dry and wet wipes, sustainability, end-use markets, substrate formation, raw materials and fibers, liquid ingredients, packaging, machinery, and market trends and data are encouraged to submit a brief abstract of one or two paragraphs detailing the relationship of their presentation to wipes or wipe manufacturing. Along with a brief abstract summary, professionals should also submit a speaker’s photo, and biography. Information may be submitted online via the WOW website before December 2nd.

Over 450 wipes business leaders are expected to convene at the Atlanta Marriott Marquis Hotel July 17-20, 2023 to hear premium content in market research, product innovations, sustainability issues, new materials and substrates for all wiping products and their components.

INDA’s 17th annual World of Wipes® (WOW) International Conference is accepting abstracts through December 2, 2022, on innovative, inspiring, and informative wipe products, markets and technologies to be presented in Atlanta, GA, July 17-20, 2023.

Experts in the areas of dry and wet wipes, sustainability, end-use markets, substrate formation, raw materials and fibers, liquid ingredients, packaging, machinery, and market trends and data are encouraged to submit a brief abstract of one or two paragraphs detailing the relationship of their presentation to wipes or wipe manufacturing. Along with a brief abstract summary, professionals should also submit a speaker’s photo, and biography. Information may be submitted online via the WOW website before December 2nd.

Over 450 wipes business leaders are expected to convene at the Atlanta Marriott Marquis Hotel July 17-20, 2023 to hear premium content in market research, product innovations, sustainability issues, new materials and substrates for all wiping products and their components.

The last WOW event held in Chicago connected more than 450 participants from 18 countries representing the entire wipes supply chain to explore issues and advancements in the growing multibillion-dollar wipes sector. WOW is targeted exclusively for wipes brand owners, converters, manufacturers, and their entire supply chain.

The WOW Committee is developing content for a timely and relevant program that targets such areas as energy consumption, digitalization, global supply chain challenges, the plastics issue, ingredient transparencies, market intelligence, substrate developments, converting systems, material science, packaging, and circularity advances in personal and industrial wipes.

Training at the WOW 2023 Conference
The WIPES Academy, the industry’s first and only comprehensive wipes training for the entire supply chain, will occur prior to the conference start, July 17-18. Participants will gain a strong foundation of fundamental wipes knowledge, covering the basics of wipes design, manufacturing and applications, market trends, and opportunities in new product areas. At least two years of basic nonwoven fabrics knowledge or completion of the INDA Elementary Nonwovens Course are the recommended prerequisites.

More information:
INDA WOW World of Wipes
Source:

INDA

31.10.2022

Cinte Techtextil China announces exhibitors for December Edition

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

  • TESTEX, an international, independent Swiss institute which specialises in the testing and certification of textile and leather products. The organisation is a founding member and official representative of the OEKO-TEX® Association, and will present their certification services at the fairground.
  • Cotton Council International (CCI) is a non-profit trade association that promotes US cotton fibre and manufactured cotton products, with their COTTON USA™ Mark. At this year’s fair they will showcase cotton spunlace fabric, wipes, kitchen tissues, facial masks, cosmetic removers, and more, with their products particularly applicable to Agrotech, Clothtech, Medtech, and Sporttech.
  • Graf + Cie AG is a subsidiary of the Rieter Group, and a leading supplier of clothing for carding and combs for combing machines in the short- and long-staple spinning industry. This year, the Swiss company will showcase stationary flats, and metallic card clothing for roller cards.
  • At the returning German Pavilion, buyers can source sought-after technical textiles and nonwovens that are renowned for their quality. The companies and expertise on display at this pavilion are endorsed by the Federal Republic of Germany, with several exhibitors highlighted below:
  • Brückner Textile Technologies GmbH & Co KG has developed machinery for the textile industry since 1949. Today, the company offers complete line systems for the dry finishing of both woven and knitted fabric, as well as for technical textiles, glass fibres, and floor coverings.
  • Perlon (Zhejiang) Co Ltd is part of a global group of companies that specialises in the manufacture of synthetic filaments, with factories in China, Germany, Poland, and the US. Their products have a diverse range of potential uses, largely categorised in the Agrotech and Indutech application areas.
  • IBENA Textilwerke GmbH produces various functional fabrics for Protech. At the fair, the company will be showcasing insulative, flame retardant (FR) textiles for firefighting and search & rescue services. Developed with DuPont™ aramid material, their FR properties will not diminish after washing or repeated use.

This year’s fair also sees the return of the Taiwan Zone. With support from the Taiwan Nonwoven Fabrics Industry Association, the area will showcase a range of industry leading nonwoven products and services, by brands such as KNH Enterprise, Nan Liu Enterprise, Unique Pretty Ind, and Web-Pro Corporation.

As a world’s largest manufacturer of technical textiles, China is home to a vast array of companies responsible for innovative products. Some domestic exhibitors to look out for are:

  • CTA Hi-Textiles Co Ltd, a high-tech enterprise controlled by China Textile Science Research Institute. In recent years, the company has developed several new textile composite materials, and their products are widely used in sectors such as national defence, policing and public security, medical protection, and engineering and manufacturing.
  • Sateri is one of the world’s largest producers of viscose fibre, with an annual capacity of 1.8 million metric tonnes. At their mills, they make yarn and fibre products applicable to sectors such as beauty, hygiene and personal care, medical, wipes, and protective wear.

To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations. Further information on Match Plus will be available at a later stage.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

Photo: Bogner
11.08.2022

BOGNER Golf Collection Fall/Winter 2022

The BOGNER Golf collection combines an active lifestyle with luxurious comfort and a hint of glamour. Highly functional essentials are the best equipment for long days on the golf course: a waterproof finish and taped seams offer protection from the rain; high-performance Thermore® insulation gives mid-layers moisture-regulating, quick-drying and warming qualities; Powerstretch guarantees freedom of movement, and the lightweight quality of tech jersey ensures the best in comfort.

Each BOGNER golf collection is used to layer styles individually to create the perfect golf outfit according to the needs and regardless of the season. The selection of pants, polos, skirts, jackets and accessories combine sporty appeal and timeless style. Modern contrast stripes, monochrome elegance, neutral colors and sporty silhouettes – true to the motto Athluxury Sports Fashion.

The BOGNER Golf collection combines an active lifestyle with luxurious comfort and a hint of glamour. Highly functional essentials are the best equipment for long days on the golf course: a waterproof finish and taped seams offer protection from the rain; high-performance Thermore® insulation gives mid-layers moisture-regulating, quick-drying and warming qualities; Powerstretch guarantees freedom of movement, and the lightweight quality of tech jersey ensures the best in comfort.

Each BOGNER golf collection is used to layer styles individually to create the perfect golf outfit according to the needs and regardless of the season. The selection of pants, polos, skirts, jackets and accessories combine sporty appeal and timeless style. Modern contrast stripes, monochrome elegance, neutral colors and sporty silhouettes – true to the motto Athluxury Sports Fashion.

Source:

Willy Bogner GmbH & Co. KGaA

15.07.2022

ANDRITZ at CINTE 2022 in China

ANDRITZ will be presenting its innovative nonwovens production solutions at CINTE 2022 in Shanghai, China (September 6–8). ANDRITZ will show its broad product portfolio covering state-of-the-art nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

SUSTAINABILITY IS KEY
ANDRITZ supports nonwovens producers in the move to sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded pulp or standard carded wipes. The latest development in this field is the ANDRITZ neXline wetlace CP line, which integrates the carded-pulp (CP) process. This is a fully engineered production line combining the benefits of drylaid and wetlaid technologies to produce a new generation of biodegradable wipes.

ANDRITZ will be presenting its innovative nonwovens production solutions at CINTE 2022 in Shanghai, China (September 6–8). ANDRITZ will show its broad product portfolio covering state-of-the-art nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

SUSTAINABILITY IS KEY
ANDRITZ supports nonwovens producers in the move to sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded pulp or standard carded wipes. The latest development in this field is the ANDRITZ neXline wetlace CP line, which integrates the carded-pulp (CP) process. This is a fully engineered production line combining the benefits of drylaid and wetlaid technologies to produce a new generation of biodegradable wipes.

NEXLINE WETLAID AXCESS TARGETS SMALLER AND MEDIUM PRODUCTION VOLUMES
The neXline wetlaid aXcess targets smaller and medium production volumes and has been devised for new and existing lines. The compact line provides an entrance to the growing wetlaid market, with a variety of final applications and options.

ANDRITZ AXCESS DEVELOPED FOR MEDIUM CAPACITIES IN WUXI, CHINA
The aXcess range was specially developed at ANDRITZ (China) Ltd. Wuxi Branch to handle medium capacities. The facility in Wuxi has an experienced platform for production and service specially geared to serve the Asian nonwovens industry. It designs and manufactures cutting-edge lines to complement the ANDRITZ aXcess product range, which includes complete lines and individual machines for air-through bonding, needlepunch and spunlace processes. With the aXcess range, ANDRITZ has developed a hybrid line combining European and Chinese machines, which is the ideal combination to obtain the best added value from each component in the line and be very flexible to accommodate different business cases.

The service organization was set up to provide prompt delivery and excellent customer support, even during the COVID-19 pandemic. A team of technicians and process experts can be deployed quickly to customer sites requiring full-range assistance. The ANDRITZ facilities include a roll service center with state of-the-art grinding equipment and a test stand for various types of rolls.

In addition, our aXcess range manufactured in Europe also offers technologies for spunlaid and wetlaid processes. Increasing production speeds and widths, compact and reliable design, and affordable investment costs are what customers look for in a competitive market environment. To meet these requirements ideally, we recently enhanced our nonwoven calender and dryer ranges.

08.06.2022

ANDRITZ at WOW 2022

International technology group ANDRITZ will be presenting its innovative nonwovens production solutions for wipe applications at the international World of Wipes (WOW) 2022 conference in Chicago, USA, from June 27 to 29, 2022.

ANDRITZ’s “We Care” sustainability program combines all ESG (Environment, Social, Governance) initiatives, goals, and achievements under one roof. For many years now, ANDRITZ has been offering various nonwoven processes to produce best and cost-effective wipes, for example spunlace, Wetlace and Wetlace CP. ANDRITZ also accompanies nonwovens producers in the move towards sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded-pulp or standard carded wipes. Indeed, hydroentanglement has the advantage of being able to bond any kind of fibers without the use of chemical binders or thermal fusion.

International technology group ANDRITZ will be presenting its innovative nonwovens production solutions for wipe applications at the international World of Wipes (WOW) 2022 conference in Chicago, USA, from June 27 to 29, 2022.

ANDRITZ’s “We Care” sustainability program combines all ESG (Environment, Social, Governance) initiatives, goals, and achievements under one roof. For many years now, ANDRITZ has been offering various nonwoven processes to produce best and cost-effective wipes, for example spunlace, Wetlace and Wetlace CP. ANDRITZ also accompanies nonwovens producers in the move towards sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded-pulp or standard carded wipes. Indeed, hydroentanglement has the advantage of being able to bond any kind of fibers without the use of chemical binders or thermal fusion.

The latest development in this field is the ANDRITZ neXline wetlace CP line, which integrates the card-pulp (CP) process. This is a fully engineered production line combining the benefits of drylaid and wetlaid technologies to produce a new generation of biodegradable wipes.

ANDRITZ has become a member of the board of the Responsible Flushing Alliance (RFA) in the USA. The RFA is an independent, non-profit trade association committed to educating consumers in responsible and smart flushing habits to help reduce damage to the nation's sewage systems. ANDRITZ is deeply involved in this topic with its technologies for 100% dispersible and biodegradable wet wipes and is highly committed to being part of the RFA.

More information:
Andritz AG Andritz Nonwoven WOW
Source:

Andritz AG

Photo Andritz
02.06.2022

Zhoukou Xuwang, China, starts up two ANDRITZ crosslapped spunlace lines

Zhoukou Xuwang Co., Ltd. has successfully started up two new ANDRITZ neXline spunlace lines at its facilities based in Henan province, China. Combining equipment from the aXcess and eXcelle ranges, both lines are dedicated to the production of spunlace fabrics of 30 to 120 gsm made out of viscose and polyester fibers. The ANDRITZ design will allow Zhoukou Xuwang to serve the premium product market, especially for premium hygiene and technical wipes, in China.

The ANDRITZ scope of supply for the two lines included:

  • aXcess opening and blending systems
  • high-performance eXcelle card and crosslapper
  • robust aXcess CA25 carding machine
  • efficient Jetlace Avantage hydroentanglement unit

This configuration will enable Zhoukou Xuwang to manufacture high-quality products while reducing raw materials consumption. These goals are further enabled by the installation of an ANDRITZ Asselin-Thibeau crosslapper PRO35-140, generating a uniform profile over the entire web width.

Zhoukou Xuwang Co., Ltd. has successfully started up two new ANDRITZ neXline spunlace lines at its facilities based in Henan province, China. Combining equipment from the aXcess and eXcelle ranges, both lines are dedicated to the production of spunlace fabrics of 30 to 120 gsm made out of viscose and polyester fibers. The ANDRITZ design will allow Zhoukou Xuwang to serve the premium product market, especially for premium hygiene and technical wipes, in China.

The ANDRITZ scope of supply for the two lines included:

  • aXcess opening and blending systems
  • high-performance eXcelle card and crosslapper
  • robust aXcess CA25 carding machine
  • efficient Jetlace Avantage hydroentanglement unit

This configuration will enable Zhoukou Xuwang to manufacture high-quality products while reducing raw materials consumption. These goals are further enabled by the installation of an ANDRITZ Asselin-Thibeau crosslapper PRO35-140, generating a uniform profile over the entire web width.

In spite of the difficult circumstances and supply chain disruptions related to the Covid crisis, both spunlace lines were installed smoothly and on time. They quickly went into commercial production, with a line speed of up to 100 m/min and high-performance MD/CD ratio.

More information:
Andritz Andritz Nonwoven
Source:

Andritz

Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™ (c) INDA
IDEA22 Ribbon Cutting
06.04.2022

IDEA® Achievement Award honorees

  • Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™

Approximately 5,000 participants embraced the opportunity to again engage in face-to-face business meetings with global leaders in nonwovens and engineered materials at IDEA® 2022 in Miami Beach, Fla., co-located with the second FiltXPO™,  North American’s only exhibition and conference dedicated exclusively to filtration and separation.

Industry participants at IDEA® 2022,  the 21 st edition of the world’s preeminent event for nonwovens and engineered fabric professionals, expressed their business confidence through the floor exhibits and the return to face-to-face business interaction. Scott Beir, Executive Officer, CFM Global, called IDEA® 2022 “an exceptional show.”

Bob Usher, Technical Director, US Fibers, added that his company made valuable business connections. According to Rolk Kammermann, Head of Sales and Marketing, Innovative Swiss Made Nonwovens, “the size and scope of IDEA and FiltXPO have been excellent for us as both exhibitors and as visitors.”

  • Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™

Approximately 5,000 participants embraced the opportunity to again engage in face-to-face business meetings with global leaders in nonwovens and engineered materials at IDEA® 2022 in Miami Beach, Fla., co-located with the second FiltXPO™,  North American’s only exhibition and conference dedicated exclusively to filtration and separation.

Industry participants at IDEA® 2022,  the 21 st edition of the world’s preeminent event for nonwovens and engineered fabric professionals, expressed their business confidence through the floor exhibits and the return to face-to-face business interaction. Scott Beir, Executive Officer, CFM Global, called IDEA® 2022 “an exceptional show.”

Bob Usher, Technical Director, US Fibers, added that his company made valuable business connections. According to Rolk Kammermann, Head of Sales and Marketing, Innovative Swiss Made Nonwovens, “the size and scope of IDEA and FiltXPO have been excellent for us as both exhibitors and as visitors.”

Organized by INDA, IDEA® also featured five essential nonwovens training classes; market presentations from China, Asia, Europe, North America and South America; industry recognitions with the IDEA® Achievement Awards and the IDEA® Lifetime Achievement Awards; and a welcome reception celebration.

Also, organized by INDA, FiltXPO™ featured five panels of global leaders in filtration and separation for the first-ever “Summit for Global Change,” discussing societal challenges such as indoor air quality, environmental sustainability, pandemic readiness, clean water, and filtration standards.  The event also featured a 1.5-day filter media training course, and sessions highlighting filter media market trends and filtration industry statistics.  

Exhibitors and attendees noted the welcome return to meeting face-to-face among industry senior leaders participating in the three-day event.

A highlight of IDEA® was the announcement of the IDEA® Achievement Awards by INDA, in partnership with Nonwovens Industry magazine. Moderated by Rousse and Karen McIntyre, Editor, Nonwovens Industry the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability, since the previous IDEA® Exposition in 2019.

In addition, INDA presented the IDEA® 2022 Lifetime Achievement Award to Val Hollingsworth, board chair and CEO of Hollingsworth & Vose, and Nonwovens Industry presented the IDEA® Entrepreneur Achievement Award to Doug Brown, president of Biax-Fiberfilm/5K Fibres at the event.

IDEA® 2022 Achievement Awards winners:

  • IDEA®  Equipment Achievement Award – Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics, Inc.
  • IDEA®  Raw Material Achievement Award – ODOGard – Rem Brands, Inc.
  • IDEA® Short-Life Product Achievement Award – LifeSavers Wipes – LifeSavers LLC
  • IDEA® Long-Life Product Achievement Award – Nanofiber Cabin Air Filter – MANN + HUMMEL GmbH
  • IDEA®  Sustainability Advancement Award – Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
  • IDEA®  Nonwoven Product Achievement Award – HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
  • IDEA®, the Preeminent Event for the Nonwovens & Engineered Fabrics Industry, will next be held on its new 24-month schedule on April 23-25, 2024 in Miami Beach, Florida.

 

Names of the IDEA® Achievement Award honorees pictured:

Row 1, Left to right:
IDEA® Long-Life Product Achievement Award winner, Jon Nichols, MANN + HUMMEL, GmbH and Dave Rousse – Nanofiber Cabin Air Filter – MANN + HUMMEL, GmbH
IDEA®  Nonwoven Product Achievement Award winners, Pramod Shanbhag, Suominen Corporation, Karen McIntyre, Nonwovens Industry Magazine, and Avinav Nandgaonkar, HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
Row 2, left to right:
IDEA® Short-Life Product Achievement Award winner, Georgia Crawford, LifeSavers Wipes – LifeSavers LLC, and Karen McIntyre, Nonwovens Industry Magazine
IDEA® 2022 Lifetime Achievement Award winner, Val Hollingsworth, Hollingsworth & Vose, and Dave Rousse, President, INDA
IDEA®  Equipment Achievement Award winners, Uwe Peregi, Dave Rousse, and Thomas Herrmann – Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics Inc.
Row 3, left to right:
IDEA®  Raw Material Achievement Award winner, David Schneider, ODOGard – Rem Brands, Inc. and Dave Rousse, INDA
IDEA®  Sustainability Advancement Award winner, Chris Astley, and Karen McIntyre Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
IDEA® Entrepreneur Achievement Award winner, Doug Brown, Biax-Fiberfilm / 5K Fibres

30.03.2022

Suominen launches BIOLACE® Zero, its first carbon neutral nonwoven

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is an excellent product for many kinds of wiping applications like baby, personal care, and household wipes. It has excellent wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is an excellent product for many kinds of wiping applications like baby, personal care, and household wipes. It has excellent wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen’s BIOLACE® Zero and Lenzing’s VEOCEL™ Lyocell fibers are certified as carbon neutral products by globally recognized company, ClimatePartner. Carbon neutrality means that the greenhouse gas emissions of nonwoven have been calculated – from the raw material production to the client’s production facility – reduced and are offset through certified carbon offset projects.

Suominen is a pioneer in sustainable nonwovens and we have a wide range of sustainable nonwoven products for different applications. Suominen’s R&D team has excellent know-how on sustainable fibers and we are also continuously collaborating with innovative partners to develop new and innovative solutions with a reduced environmental impact into our product portfolio.

“With this new carbon neutral product BIOLACE® Zero we are able to support our customers in their greenhouse gas emissions reduction targets. Innovating new products in collaboration with partners such as Lenzing by using carbon neutral VEOCEL™ Lyocell fibers is well aligned with our strategy and vision to be the frontrunner in sustainable nonwovens”, says Noora Rantanen, Manager, Sustainability & Marketing.

Source:

GlobeNewswire

29.03.2022

Suominen launches its first carbon neutral nonwoven

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is suitable for many kinds of wiping applications like baby, personal care, and household wipes. It has wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is suitable for many kinds of wiping applications like baby, personal care, and household wipes. It has wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen’s BIOLACE® Zero and Lenzing’s VEOCEL™ Lyocell fibers are certified as carbon neutral products by globally recognized company, ClimatePartner. Carbon neutrality means that the greenhouse gas emissions of nonwoven have been calculated – from the raw material production to the client’s production facility – reduced and are offset through certified carbon offset projects.

“With this new carbon neutral product BIOLACE® Zero we are able to support our customers in their greenhouse gas emissions reduction targets. Innovating new products in collaboration with partners such as Lenzing by using carbon neutral VEOCEL™ Lyocell fibers is well aligned with our strategy and vision to be the frontrunner in sustainable nonwovens”, says Noora Rantanen, Manager, Sustainability & Marketing.

More information:
Suominen nonwovens Lenzing Group
Source:

Suominen

14.03.2022

IDEA®22 Essentials of Nonwovens Training Courses

  • IDEA22 Training: Nonwovens’ premier industry-focused learning opportunities!

IDEA®22 is just days away – but it’s not too late to register to attend, or to sign up to take INDA’s Essentials of Nonwovens training courses. Become fully immersed in the world of nonwovens with courses that will bring you up-to-the-minute on technologies, industry segments and more. Learn face-to-face, in a forum where you can ask questions and meet new colleagues. For product developers, marketing managers, technical sales or support professionals – the Essential series lives up to its name.

Essentials of nonwovens courses at IDEA®22

  • Absorbent Hygienie Cores
  • Making Nonwovens
  • Industrial Wipes
  • Consumer Wet Wipes
  • IDEA22 Training: Nonwovens’ premier industry-focused learning opportunities!

IDEA®22 is just days away – but it’s not too late to register to attend, or to sign up to take INDA’s Essentials of Nonwovens training courses. Become fully immersed in the world of nonwovens with courses that will bring you up-to-the-minute on technologies, industry segments and more. Learn face-to-face, in a forum where you can ask questions and meet new colleagues. For product developers, marketing managers, technical sales or support professionals – the Essential series lives up to its name.

Essentials of nonwovens courses at IDEA®22

  • Absorbent Hygienie Cores
  • Making Nonwovens
  • Industrial Wipes
  • Consumer Wet Wipes
14.03.2022

IDEA®22 with a Vital World View of Nonwovens

  • Expert Speakers Delivering Key Region Market Updates

Industry leaders will gain a compelling region-by-region view of the nonwovens industry from experts presenting the latest nonwovens trends in their areas of the world at IDEA®22, March 29-31 in Miami Beach.

Speakers with the latest knowledge will deliver important nonwoven market updates, demand forecasts and research findings on the industry in China, Asia, South America, North America and Europe.

The conference will explore how each region has responded to the pandemic challenges and supply chain issues with new innovations and solutions, providing IDEA®  attendees with vital insights for decision-making.

Program highlights include:

  • Expert Speakers Delivering Key Region Market Updates

Industry leaders will gain a compelling region-by-region view of the nonwovens industry from experts presenting the latest nonwovens trends in their areas of the world at IDEA®22, March 29-31 in Miami Beach.

Speakers with the latest knowledge will deliver important nonwoven market updates, demand forecasts and research findings on the industry in China, Asia, South America, North America and Europe.

The conference will explore how each region has responded to the pandemic challenges and supply chain issues with new innovations and solutions, providing IDEA®  attendees with vital insights for decision-making.

Program highlights include:

  • Overview and Green Innovation Development of China’s Nonwovens Industry,  by Guimei Li, Vice President, China Nonwovens and Industrial Textiles Association (CNITA) on March 29
  • South America – Land of Opportunity or Land of Turbulence? The Recent History and Trends That Are Shaping the South American Nonwovens Market, presented by Mariana Mynarski, Corporate Marketing Manager, Fitesa on March 29
  • Asian Nonwovens Production and Market Update by Chan-Hyou Park, Chairman, Asia Nonwoven Fabrics Association (ANFA) on March 30
  • Understanding the State of the North American Nonwovens Industry and a Market Gone Mad presented by Brad Kalil, INDA Director of Market Intelligence and Economic Insights on March 31
  • An Overview of Key Issues Facing Nonwovens on Top of European Market Trends presented by Pierre Wiertz, General Manager, EDANA on March 31

IDEA® Award Presentations
Another conference highlight will be the presentation of the IDEA® 2022 Achievement Awards in partnership with Nonwovens Industry magazine, based on the results of online voting in six categories as well as the announcement of the first Sustainability Advancement Award on March 30.

IDEA® – the World’s Preeminent Event for the Nonwovens & Engineered Fabrics Industry – will feature several hundred exhibitors from a myriad of industry sectors and is expected to once again draw an audience of several thousand senior-level buyers and attendees from over 60 countries to the Miami Beach Convention Center. A welcome reception will be held to officially kick off the event on March 28.

IDEA®22 Essentials of Nonwovens Training Courses
Product developers, marketing managers, technical sales, support and other professionals can expand their industry-focused knowledge by attending the IDEA®22 Essentials of Nonwovens Training Courses.

This vital training program will provide an immersive dive into the latest nonwoven technologies, industry segments and more with courses on absorbent hygiene cores, making nonwovens, industrial wipes and consumer wipes.

A must-attend educational session on patent searching on March 31 will cover the latest major changes in patent searches on the United States Patent and Trademark Office (USPTO) website that has been updated to enhance user experience. 

More information:
IDEA IDEA® Achievement Award
Source:

IDEA

INDA Announces Six New Board Members and Officers (c) INDA
INDA New BOD Members 2022
08.03.2022

INDA Announces Six New Board Members and Officers

  • INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

  • INDA, the Association of the Nonwoven Fabrics Industry, today announced six new board members and its 2022 slate of officers to guide the success of the nonwovens industry and its members.

Elected by the INDA membership to three-year terms that began on March 1, the new board members bring a high level of diverse expertise and insight to the management of the association as it moves forward with its vibrant growth.

“I am delighted to welcome such a strong group of new board members who bring deep industry knowledge and insights to provide strategic stewardship for our association,” said Dave Rousse, INDA President. “We look forward to working with them to advance INDA’s new value proposition to enhance our industry’s leadership position and deliver greater value to our members.”

The new board members are from global leaders Lenzing Group, Bast Fibre Technologies, Reifenhauser Reicofil, Rockline Industries, Hollingsworth & Vose Company and Principle Business Enterprises.  

INDA also announced Bryan Haynes, Ph.D., R&E Technical Director Kimberly-Clark, has been named Chairman of the Board. Barbara Lawless, Vice President Sales and Marketing, Medical Products, Precision Fabrics Group, Inc. has been elected Vice Chair of Finance, and Richard Altice, President and CEO of NatureWorks, has been appointed to INDA’s Executive Committee.

The new board members are:

  • Jürgen Eizinger, Senior Commercial Director, Nonwovens Business EU/AM/MEA, Lenzing Group

Eizinger has nearly 20 years of fiber industry experience. He has been with the Lenzing Group since 2001 and most recently was Vice President of the Global Nonwoven Business. He has worked at multiple locations around the world and held various commercial, engineering and technical customer services roles.

  • Jim Posa, President and General Manager, Bast Fibre Technologies, Inc.

Posa has 30-plus years of nonwovens experience and has successfully led businesses from startups to some of the largest companies in the nonwovens market. He has developed and implemented strategic business, development, operational and acquisition growth plans. His teams have worked with businesses focused on most of the major end use markets such as hygiene, wipes, filtration, medical and industrial. As a senior executive, Posa has led global businesses at Fiberweb, BP/Amoco, CEO of a Nisseki/Amoco joint venture (ANCI), Lydall, and Nitto America. A long-time INDA supporter, he has previously served on committees and as a Board member.

  • Markus Mueller – Sales Director and Board Member, Reifenhauser Reicofil

Mueller brings to the INDA Board 35 years of experience with Reifenhauser in the nonwovens and film industries. His experience has included roles as PLC Engineer, Commissioning Engineer, Project Manager and Sales Manager. Mueller has extensive knowledge of the global hygiene and medical nonwovens markets. He holds a degree in Electrical Engineering from the Technical University of Cologne.

  • Matt Koele, Director of Global Materials Development, Rockline Industries

Koele is based at Rockline’s headquarters in Sheboygan, WI.  Before joining Rockline in 2012, he has held several business and Research and Development (R&D) leadership positions at SC Johnson and Kimberly-Clark Corporation. An inventor with over 10 patents, Koele is a magna cum laude graduate of Michigan Technological University in Chemical Engineering.

  • Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company

Clark joined H&V in 2003 and has held numerous leadership positions in the U.S. and Germany. He previously served as the President of the High Efficiency and Specialty Filtration Division from 2009 to 2020.  Before joining H&V, Clark was a strategy consultant for eight years working with Fortune 100 manufacturing companies. He holds a bachelor’s in Mechanical Engineering from Rensselaer Polytechnic Institute.

  • Andrew Stocking, Ph.D., President and CEO, Principle Business Enterprises, Inc. (PBE)

Stocking joined PBE in 2017 after a career in engineering, technology, nonprofits and government. He was named President and COO in 2018, then President and CEO in 2020, becoming the third-generation leader of the family-owned organization. He previously held roles in the private sector and within federal government offices, including the Department of Energy and Congressional Budget Office. He earned a BS in Chemical Engineering and an MS in Civil Engineering from Stanford University, and a Ph.D. in Resource Economics from the University of Maryland.

The 21-member board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by a majority vote of INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus four appointees.

Source:

INDA, Association of the Nonwoven Fabrics Industry

International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line. © ANDRITZ
ANDRITZ crosslapper PRO 25-90
02.03.2022

ANDRITZ- a new batt forming line for Romatex

  • International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line.

The line will be dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles. Start-up of the line is planned for the fourth quarter of 2022.

ANDRITZ will deliver dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to achieve the technical characteristics Romatex requires in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve the growing customer requirements in terms of availability of high-quality products.

  • International technology group ANDRITZ has received an order from Romatex (Pty) Ltd., South Africa, to supply a new batt forming line.

The line will be dedicated to the production of Maliwatt products used in a wide range of applications, including home textiles. Start-up of the line is planned for the fourth quarter of 2022.

ANDRITZ will deliver dedicated batt forming equipment, mixing an aXcess card and an eXcelle crosslapper to achieve the technical characteristics Romatex requires in terms of product quality and line performance. This new stitchbonding line will enable Romatex to better serve the growing customer requirements in terms of availability of high-quality products.

This will be the third line supplied by ANDRITZ to Romatex in four years. Helmut Höck, General Manager Operations at Romatex, says: “We bought our first line from ANDRITZ in 2017, then another one in 2019. We have been very satisfied with the close collaboration between our companies, the flexibility and reliability of the machines, as well as the excellent service from ANDRITZ over all these years. The experience has been uncomplicated. This has given us the confidence to consider ANDRITZ for a further investment.”

ANDRITZ is one of the global market leaders for supply of nonwoven production technologies, including batt forming equipment for the stitchbonding processes used to make Maliwatt, Malivlies and Multiknit. This segment addresses a variety of applications, including automotive, household, bedding, footwear, wipes, and many others.

Romatex is the leader in Maliwatt stitchbonding in Africa. Its facility is located in Cape Town. One of the company’s key strengths is its product diversification. Today, the company offers a complete range of bed linen, duvets, pillows, and stitchbonded products.

More information:
Andritz nonwovens
Source:

ANDRITZ-GRUPPE

(c) Composites Evolution
19.01.2022

Composites Evolution launches new Evopreg® thermoplastic tapes

  • Evopreg® range expanded with unidirectional fibre-reinforced thermoplastic tapes

Composites Evolution, a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials, has announced the launch of a new range of unidirectional thermoplastic tapes, to sit alongside its existing line-up of Evopreg® prepregs. The first product families being launched are Evopreg® PA polyamide tapes, and Evopreg® PP polypropylene tapes, with further product lines expected as new customer requirements emerge.

Thermoplastic tapes, also known as thermoplastic prepregs, can be used in a wide variety of markets and applications, including flexible pipes for oil & gas and water transportation, pressure vessels (for example; hydrogen storage tanks and compressed natural gas tanks), and for providing local reinforcement to pre-formed components.

  • Evopreg® range expanded with unidirectional fibre-reinforced thermoplastic tapes

Composites Evolution, a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials, has announced the launch of a new range of unidirectional thermoplastic tapes, to sit alongside its existing line-up of Evopreg® prepregs. The first product families being launched are Evopreg® PA polyamide tapes, and Evopreg® PP polypropylene tapes, with further product lines expected as new customer requirements emerge.

Thermoplastic tapes, also known as thermoplastic prepregs, can be used in a wide variety of markets and applications, including flexible pipes for oil & gas and water transportation, pressure vessels (for example; hydrogen storage tanks and compressed natural gas tanks), and for providing local reinforcement to pre-formed components.

Marketing Director, Ben Hargreaves, explains further: “Our state-of-the-art manufacturing line gives us the capability to produce tapes on an industrial scale, using a variety of combinations of fibre and polymer. This is complemented by a pilot-scale line that allows us to carry out development trials, or manufacture small quantities of tape if required.”

“Because they can be repeatedly re-formed (via the application of heat and pressure), Evopreg® thermoplastic tapes are also very well-suited to multi-stage processing, meaning they are an excellent choice for producing hybrid structures, inserts or over-moulded components. In addition, this ability to be repeatedly re-formed opens the door to much easier recycling than is currently possible with thermoset composites.”

 

Source:

Composites Evolution

(c) RadiciGroup
25.10.2021

RadiciGroup: Sustainable Personal Protective Equipment at A+A

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

At RadiciGroup, care for the health and safety of people is one of the pillars of the Group's sustainability strategy, combined with a strong commitment to safeguarding the environment. Radipeople Eco, the first protective coverall with 100% end-of-life recyclability is proof of such commitment. All parts of Radipeople Eco: the fabric, lamination, zipper and thread are made of the same material, 100% polypropylene. Furthermore, the Group’s offering includes garments made with Respunsible®, a spundbond obtained from recycled polypropylene or materials certified under the ISCC Plus scheme.

Thanks to their versatility and technical characteristics, the nonwoven solutions proposed by RadiciGroup are suitable for many industrial sectors, including oil and gas, utilities, construction, food, automotive painting and shipbuilding, maintenance, agriculture, laboratories, microprocessor manufacturing and the pharmaceutical and chemical industries.

Radipeople personal protective equipment delivers excellent protection against external agents (liquids, splashes, jets, particles and sprays), high protection against biological hazards and infectious agents, and high robustness and lightness to optimize protection, on the one hand, and comfort, on the other. All Radipeople protective equipment is made of fully traceable materials, manufactured by a totally Italian production chain involving hundreds of workers, and sold in packaging designed with an ecodesign approach, that is, fully recyclable minimized packaging.

Source:

RadiciGroup