From the Sector

Istanbul Apparel Exporters’ Association (İHKİB) and Bilişim Vadisi -Technology Development Zone (Informatics Valley) have signed a Cooperation Protocol to enhance the competitiveness of the Turkish apparel industry in global markets. Under this protocol, the parties will develop projects and work packages that add value to the sector, focusing primarily on twin transformation, sustainability, the circular economy, and design. 

Speaking at the signing ceremony, İHKİB Vice President Mustafa Paşahan noted that Türkiye is the world’s seventh-largest apparel supplier and the third-largest supplier to the European Union (EU). He stated that Türkiye accounts for 3.2% of global apparel exports, and continued: 

“We are a leading country in apparel production. Thanks to our high quality, rapid and flexible manufacturing capabilities, and geographical advantages, we stand out from our competitors. We already comply with European standards in areas such as recycling, carbon footprint reduction, digitalization, and social compliance. To further strengthen our position in global markets, we aim to build on these existing strengths and turn digital and green transformation into key opportunities. In this process, we are making effective use of EU funds through projects developed under the IPA (Instrument for Pre-accession Assistance). So far, we have secured €37 million in EU funding. In February, we successfully completed our METAMORPHOSIS project under IPA II, one of the key outcomes of which was the establishment of the Digital Transformation Center, which now serves the industry. Last month, we launched our MIDAS project, also with EU funding, to provide the necessary infrastructure for twin transformation among SMEs. Later this year, we will initiate our 'Carbon Footprint Tracking and Reduction' project, again supported by EU funds. With our new partnership with Bilişim Vadisi, we believe we will launch many innovative projects that will further enhance the global competitiveness of our fashion industry, especially in digitalization and green transformation.” 

ERKAM TUZGEN: CONNECTING STAKEHOLDERS WITHIN THE SAME ECOSYSTEM 
General Manager of Bilişim Vadisi Erkam Tüzgen also shared his thoughts: “Next-generation textile technologies are being driven not only by major players but also by creative startups. Through this program, we are bringing together young entrepreneurs, designers, and technology developers within a shared ecosystem. Bilişim Vadisi will continue to act as a catalyst at this intersection of technology and design.”

Under the protocol, the two parties will apply for national and international support programs focused on digitalization, green transformation, sustainability, the circular economy, and creative industries. They will jointly develop projects and work packages aligned with strategic goals in the technology and design sectors. By collaborating with their affiliates and stakeholders, they will form solution-oriented partnerships in digital transformation and design processes. They will also engage in joint efforts through structures such as digitalization and design clustering centers. Entrepreneurs based in Bilişim Vadisi will be given opportunities to grow through partnerships with İHKİB members.

More than 1,200 exhibitors from twenty-five countries are taking part in  Texworld Apparel Sourcing Paris from 10 to 12 February at the Paris-Le Bourget Exhibition Centre, showcasing the very best in global sourcing  to help fashion brands build their Spring-Summer 2026 collections.
Over the three days, international buyers will have access to the leading market platform for textiles and clothing, and will be able to discover, in a refurbished space, a first-rate offering with a very wide choice at competitive prices. This concentration of manufacturers and makers constitutes the heart of the international market in the mid-range segments, which now account for the bulk of finished garment consumption.

Reflecting the diversity of global sourcing
Texworld Apparel Sourcing Paris brings together not only the major players in global sourcing, such as China, Turkey, India, Korea, Pakistan and Taiwan, but also suppliers from alternative zones with rich expertise, such as Malaysia, Singapore, the UK, Vietnam, the Netherlands, Africa - a dozen companies from Ethiopia, Rwanda, Egypt and Benin will be in Paris in February - and South America. For the first time this year, Texworld will be welcoming an Argentinian woollen manufacturer - Industrias Textiles Frione - which offers a range of top-quality fabrics while promoting manufacturing processes that are particularly environmentally friendly.

Texpertise Econogy: initiatives to promote sustainable fashion
As part of its commitment to more responsible fashion, Messe Frankfurt is supporting players who respect the ecological and social standards of the textile industry. At the entrance to Hall 4, the new ‘Initiatives’ zone will be showcasing inspiring and sustainable solutions promoted by some exhibitors. This area (where you'll find press and partner stands, events and trend forums) will also host the China Textile Information Centre's trend forum, as well as the Texpertise Econogy Hub, where Messe Frankfurt will be presenting its commitments to sustainability in the textile sector through the Texpertise Econogy concept, which combines ecology and economic development.

As part of this initiative, two Econogy Tours will enable visitors to discover what a selection of certified companies can offer. These guided tours, led by a specialist in the sustainable approach, will be offered on Monday 10 February (12.30pm-1.30pm) and Tuesday 11 February (10am-11am) to buyers who wish to take part. Appointments are scheduled at the Econogy Hub counter.

Conferences, trends and forecasts
To complement the product offering, a series of events and conferences will be taking place. Held in the Agora in Hall 2, they will explore market trends and prospects in detail. Louis Gérin, the shows' artistic director, will be commenting on “Neocene”, the Trendbook for the Spring-Summer 2026 season, focusing on the creative directions that will shape the fashion of tomorrow. Several conferences will provide an insight into the business models of manufacturers such as Wellfabric - Bao Lan Textiles, one of the pioneers of sustainable textiles  in Vietnam, and the African platform Arise IIP, present at Apparel Sourcing.  Finally, there will be round-table discussions on forward-looking issues such as fast fashion and the challenges of sustainability in terms of production and sourcing. They will also look at solutions to support the ecological transition (Econogy Talks), as well as innovation and management challenges. These conferences, which will take place on Monday and Tuesday, are free to attend.

Fabtex Georgia 2024 International Textile Industry Fair has concluded with remarkable success, bringing together over 1,050 professional visitors from 11 countries, including Georgia, Russia, Armenia, India, China, Ukraine, Germany, Iran, Turkey, Poland, and Pakistan.

This year’s exhibition featured 52 exhibitors from Georgia, Turkey, Azerbaijan, the UAE, Uzbekistan, and China, underscoring the event's international significance.

The exhibition's exhibitor profile primarily focuses on knitted fabrics, woven fabrics, fabrics for workwear and uniforms, various accessories, garment and sewing machinery, and ready-to-wear items.

Georgia has a long-standing tradition in the textile sector, dating back to Soviet times, and is currently home to production for international brands such as Tommy Hilfiger, Zara, Moncler, and Puma.

Georgia’s strategic location at the crossroads of Western Asia and Eastern Europe, coupled with its rich textile history, makes it an ideal hub for textile manufacturing and investment. The country boasts several Free Trade Agreements (FTAs) with Turkey and CIS nations, as well as a Deep and Comprehensive Free Trade Agreement (DCFTA) with the EU, providing access to a market of approximately 900 million people without customs duties.

CARBIOS and SASA, a manufacturer of polyester, fiber, filament yarn, polyester-based polymers, specialty polymers and intermediates, have signed a Letter of Intent (LOI) to cooperate through SASA’s potential acquisition of a license for CARBIOS’ unique PET biorecycling technology. This licensing agreement would allow SASA to construct and operate an enzymatic depolymerization plant in Adana, Turkey, with a capacity of 100,000 tons per year of prepared PET waste, and would give access to a circular recycling technology, enabling the production of polyester pellets, fibers and textiles from various waste sources, including polyester textile waste. With CARBIOS' biorecycling technology, SASA would diversify its offering to meet the growing global demand for sustainable materials in the textile industry, primarily catering to the European market.

Less than 1% of textile waste is currently recycled into new textile fibers^[1].  With European regulations moving towards the incorporation of more recycled content (at least 20% of recycled fibers by 2030), demand for recycled polyester in the EU is anticipated to increase, naturally positioning Turkey as a major producer alongside Asian countries.  In this context, SASA is striving to become the largest supplier of high value-added polyester in the region and beyond. To achieve this, SASA aims to introduce recycling as part of its activities, which already encompass the whole value chain from PET production to fiber and textile conversion. CARBIOS’ PET biorecycling technology plays an important part in SASA’s ongoing transformation strategy, which includes back integration, capacity expansion, even higher competitiveness, as well as circularity.

CARBIOS has developed a enzymatic depolymerization technology that enables efficient and solvent-free recycling of PET plastic and textile waste into virgin-like products. CARBIOS has ambitious plans to become a leading technology provider in the recycling of PET by 2035. After the recent announcement of a joint Letter of Intent with Zhink Group in China, this new Letter of Intent for a potential licensing agreement in Europe confirms global traction for CARBIOS biorecycling technology, and marks another significant step in the international roll-out of its licensing model. In addition to the world’s first industrial-scale enzymatic PET recycling plant which is currently under construction in Longlaville, France, this potential plant in Turkey would process PET waste that is currently not recyclable using conventional recycling technologies.

[1] System Circularity and Innovative Recycling of Textiles | Circular Cities and Regions Initiative (europa.eu)

Mayer & Cie. presented an overview of its current portfolio in the circular knitting sector at the ITM in Istanbul. Two machine types – the SF4 3.2 III and the Relanit 3.2 HS II – and various smart solutions that make circular knitting more efficient were on display. knithawk, a tool for the optical detection of knitting defects, met with interest among the visitors. The same was true for knitlink, Mayer & Cie's hub for digital solutions. Spare parts packages and conversion kits are also in demand for the long-term value retention of Mayer & Cie. machines.

Relanit 3.2 HS II
The Relanit 3.2 HS mechanical single jersey machine offers high productivity, especially in the context of elastic plating. It processes a wide range of yarns and qualities reliably. It is suitable for processing recycled yarns. Their energy consumption is up to a third lower than that of a circular knitting machine with conventional technology.

In Istanbul, Mayer & Cie. presented an updated version of its flagship, the Relanit 3.2 HS II. The new open-width take down is the single component that attracted the most interest. It ensures a uniform pull-off tension of the knitted fabric over its entire circumference. The knitted hose is only opened below the take-down rollers. Furthermore, the take-dwon is equipped with two drives: one for tensioning, one for rewinding. Both can be controlled separately.

Another innovation of the Relanit 3.2 HS is aimed at reducing downtimes: The needle with predetermined breaking point, which was developed together with Groz-Beckert, prevents it from breaking uncontrollably and, in the worst case, breaking needle butt. The new spring sinker is also a joint development with Groz-Beckert. This makes the Relanit 3.2 HS II run more smoothly, produce less noise as well as with less wear and tear.

SF4-3.2 III for lightweight three-tread fleece knitted fabrics
With its SF4-3.2 III, Mayer & Cie. is addressing a trend in the clothing industry that is reflected beyond Turkey: lightweight, elastic three-thread knitted fabrics in both pure cotton and blends.

New Control 5.0 machine control system
Both ITM machine exhibits were on display with the new Control 5.0 machine control system. Control 5.0 is a prerequisite for using knitlink, the hub for Mayer & Cie's digital applications. In this function, the machine control system attracted interest from various large customers.

In the standard SmartControl version, as shown in Istanbul, a so-called Smart Knob is attached to each machine foot. From there, all the functions that the machine operator needs for his work are available. More in-depth settings, such as those made by the knitting manager, are only possible from a mobile device. Any number of Mayer & Cie. machines can be operated from this at the same time.

knithawk
knithawk, a tool for optical defect detection, inspects the knitted fabric as it is produced. It sits in the single jersey machine directly at the knitting point. If knithawk detects a serious or recurring error, the machine is stopped. The tool also creates an error log.

Machine-specific upgrade and conversion kits
With its upgrade kits, Mayer & Cie. brings technological innovations to existing machines. These range from machine-specific upgrades, such as the Performance Kit for existing Relanit 3.2 models to the Senso Blue RS lubrication system.

In addition to the upgrade kits, Mayer & Cie. offers conversion kits for popular machine types. Two are currently available: for the MV4 3.2 II/MBF 3.2 and the S4-3.2 II/ SF4-3.2 III.

Monforts, which is celebrating its 140th anniversary this year, will exhibit a Montex stenter chamber with an integrated overhead heat recovery unit at the forthcoming ITM textile machinery exhibition in Istanbul from June 4-8.

The heat recovery unit on display at the stand of Monforts partner Neotek is just one of a range of energy saving options the company is now providing for both new and existing line installations.

Monforts Montex stenters and Thermex dyeing ranges are industry standard for the fabric finishing industry, providing many advantages in terms of production throughput and especially in energy efficiency and savings.

coaTTex
At ITM, Monforts will also introduce its latest coaTTex coating unit, dedicated to air knife and knife-over-roller coating. For single-sided application with paste or foam, the versatile coaTTex is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts lines, especially Montex stenter systems.

A wide range of coatings can be applied to fabrics for providing functions such as waterproofing, liquid and gas protection and breathability, in addition to foam lamination and coating, including black-out coating.

Central location
“In Turkey we are very strongly supported by our representative Neotek, our solution partner on the ground for service, installation and commissioning, providing specialised and rapid help to all of our customers,” says Monforts Area Sales Manager Thomas Paeffgen. “ITM is always one of the most important exhibitions for Monforts, for meeting customers not just from Turkey, but across the Middle East and Central Asia, as well as Bangladesh, India and Pakistan.

“Istanbul’s centralised position makes it accessible to the majority of the major textile manufacturing hubs and as we mark our 140th anniversary in 2024, having been founded back in 1884, the ITM show will provide us with the ideal opportunity to celebrate with colleagues and customers all together in one location.”

Vandewiele Sweden is spearheading a transformation in B2B operations for the industry, with a new e-commerce platform developed in Sweden. The company, a member of TMAS, the Swedish Textile Machinery Association, has taken on the task of developing the digital solution that will meet the future demands for Vandewiele Group customers worldwide.

The Vandewiele Sweden team has developed a user-friendly interface that exploits the latest "exploding view" diagrams to ensure customers can easily identify and order the components they need, all within a 1:1 digital representation. The next stage in 3D technology is set up and ready, although it awaits implementation and market readiness to fully integrate and utilize its features.

Adopting a phased approach, the company is initially introducing its IRO-branded accessories, spare parts and gauge parts, targeting textile mills, weavers and distributors. The platform has been carefully crafted to cater to the varying needs of its diverse clientele, offering streamlined direct sales and a transparent commission structure for agents and distributors.

With an ambitious logistics promise of 48-hour dispatch and leveraging third-party payment service providers like Nets, the company assures speed and reliability in every transaction.

Scheduled for launch in April, Vandewiele stands ready to introduce its new e-commerce solution to key markets, including Scandinavia, the Baltics, parts of Europe, Turkey, and India.

Toros Greenhalgh becomes General Manager of the new KARL MAYER subsidiary in Türkiye

In October 2023, the KARL MAYER GROUP established its own site in Bursa, Türkiye, thus increasing its presence in one of its most important markets. KARL MAYER TURKEY will meet increasing customer demands for after-sales service, spare parts (Care Solutions), and academy, in the sectors of warp knitting and warp preparation, while KARL MAYER’s long-standing regional representative ERKO focuses on machine sales.

Toros Greenhalgh was appointed General Manager of KARL MAYER TURKEY on February 1st of this year. Holding a degree in mechanical engineering and materials science from the University of Birmingham, he comes with experience in the fields of industrial plant construction management, renewable energy technologies, and the distribution of medical devices. For the past seven years he has been active in the sector of textile machinery through ERKO with particular focus on KARL MAYER machine sales, service, and spare parts.

The KARL MAYER GROUP is intensifying its business activities in Turkey and is setting up a subsidiary in Bursa. The opening of the new site is planned for October 2023.

The company's success on the market to date has been made possible to a large extent by its close and long-standing cooperation with Erko, the KARL MAYER GROUP's regional representative. The two companies have been cooperating for more than 50 years and see further positive market development in Turkey in the medium to long term.

In order to exploit and shape the potential, they will sharpen the focus of their competences in the Warp Knitting and Warp Preparation Business Units: Erko A.S. will focus on sales, taking advantage of its long-standing regional network. The KARL MAYER GROUP will take over the after-sales service and offer customers a link to the Care Solutions world of the group. Customers benefit from next-level support with many innovative solutions, especially digital ones, for meeting the challenges of our time. At the same time, they can continue to build on the tried and trusted.

The headquarters in Bursa covers just under 1,000 m² on three levels. It offers space for service, an academy with textile samples and a training machine, a workshop for minor repairs and a warehouse for the spare parts business. Located in the top-selling region in Turkey, it is also designed as a contact point for customers.

Thanks to its strong position on the Turkish market, the KARL MAYER GROUP intends to support the companies here, most of which are family-run, in the forthcoming generational changes, and to provide the next generation with specialist support and qualifications.

BTMA member Tatham has just delivered an advanced industrial hemp processing line to a major customer in Turkey and had many fruitful discussions about its machinery for the processing of natural staple fibres at the recent ITMA 2023 held in Milan from June 8-14.

The Bradford, UK-based company continues to equip mills around the world with staple fibre spinning and nonwoven technologies for manufacturing a wide range of products, while its TS system for drives and controls is suitable for retrofitting to all OEM textile machines, to provide user-friendly control systems with complete synchronisation and significant energy savings.

“We are currently fielding a lot of enquiries for technologies for the decortication, fibre opening and fabric forming of hemp,” said Tatham director Tim Porritt. “This is being driven by the sustainability of the fibre and concerns over climate change as brands seek solutions to meet their sustainability goals. As a result, there has been an explosion in the interest in hemp production, from farmers through to fibre production, and a wide range of new potential end-uses are being explored.”

Tatham offers a complete ‘Field to Fibre’ service for industrial hemp fibre production and its decortication and cleaning process has a gentle opening action to maintain the fibre length, to make it suitable for subsequent processing.