From the Sector

The transition towards safer and more sustainable chemicals is progressing in some areas, while in others, it is just beginning. This is the finding of a first, joint Europe-wide assessment of the drivers and impact of chemical pollution by the European Environment Agency (EEA) and the European Chemicals Agency (ECHA). The benchmarking found that more work is still needed to reduce the impact of harmful substances on human health and the environment.

The number of industrial chemicals scrutinised under the EU’s chemicals legislation to determine their safety has increased substantially. Authorities now have much better knowledge about the hazardous properties of chemicals that are used across the EU, resulting in many actions to minimise and control the risks of several groups of substances.

According to the joint EEA-ECHA synthesis report on the EU indicator framework for chemicals, the overall use of the most harmful chemicals (in particular those that are carcinogenic, mutagenic and reprotoxic) is still growing but more slowly than the overall chemicals market growth. Pressure is increasing to avoid the use of so-called substances of concern and to implement the principles of the safe and sustainable by design framework.

There is a need to more effectively ensure that consumer products do not contain the most harmful substances, for example chemicals that are endocrine disrupting, that negatively affect the hormone system, or substances that are persistent, bioaccumulative and toxic, which present a risk for years to come even after their use has ceased.

More data and information are needed to better understand human and environmental exposure to those most harmful chemicals and their impacts. Still, the indicators show clearly that the shift to safe and sustainable chemicals must continue and should even be accelerated.

The report is based on a set of 25 key indicators, which monitor the drivers and impacts of chemical pollution in Europe.

Key findings

• Transition towards safer and more sustainable chemicals is progressing in some areas while in others it is just getting started.
• Action by authorities and industry has supported minimising and controlling the risks from several groups of hazardous chemicals. Efforts are ongoing to increase knowledge on chemical hazards and support risk management action where needed.
• Available data suggest that there is little evidence of progress towards eliminating substances of concern from waste and secondary materials. This is a barrier to the transition towards a more circular economy.
• Emissions of certain chemicals to water and air have fallen following specific EU regulations (e.g., on industrial emissions) and international actions, but further measures are needed to reach concentration levels that are not harmful for human health and the environment.
• Emissions from industry still lead to major costs in terms of damages to human and ecosystem health.
• Human biomonitoring offers the opportunity to understand human exposure to chemicals from multiple sources and thus health risks associated with chemical pollution. As such, biomonitoring forms a key tool to measure the effectiveness of chemicals legislation in protecting human health and the environment.

CARBIOS was awarded 1st prize in the "So French So Innovative" Award organized by Business France, the Hong Kong Committee of French Foreign Trade Advisors (CCEF), La French Tech and its partners at InnoEX 2024 (taking place in Hong Kong from 13 to 16 April). The award recognizes French innovation to promote and support French Tech in the Asia-Pacific region. The final awards ceremony was held on the French pavilion in the presence of members of the Hong Kong Government and Christile Drulhe, Consul General of France in Hong Kong.

Emmanuel Ladent, CEO of CARBIOS: "Asia-Pacific is a key market for our PET biorecycling solution, and the 'So French So Innovative' Award is a recognition that supports CARBIOS’ prospection and commercial deployment in the region. CARBIOS' technology is generating a lot of interest, leading to promising discussions and the exploration of commercial agreements to support the sustainability commitments and international operations of current and future partners."

CARBIOS' global presence
In a dynamic global PET market, where the share of recycled PET will increase, CARBIOS' ambition is to become a leading r-PET player by 2035. CARBIOS has extended its international reach to boost its commercial deployment worldwide. Teams in place in key markets are dedicated to identifying business opportunities and establishing commercial partnerships for PET biorecycling technology, with first agreements expected in 2024. To date, CARBIOS is represented in three regions: Europe, North America (including Canada) and Asia (China, Japan, Korea, Singapore, Taiwan, and soon India).

• CARBIOS Group’s solid financial structure: cash position of €192 million on December 31, 2023
• Construction progress of world’s first PET biorecycling plant in France: in line with delivery targets for customers in 2026
• Licensing: international sales teams deployed in more than ten countries, with several partnerships feasible for 2024

CARBIOS reported its operating and financial results for the financial year 2023. The financial statements as of December 31, 2023, were approved by the Company’s Board of Directors at their meeting on April 10, 2024.

2023 Financial highlights
The consolidated financial statements of the Company as of December 31, 2023, are presented in accordance with International Financial Reporting Standards (IFRS) as issued by the International Accounting Standards Board (IASB) and adopted by the European Union.

For 2022 and 2023, these IFRS consolidated financial statements include the financial statements of CARBIOS, the parent company, and the financial statements of its fully integrated subsidiaries Carbiolice and CARBIOS 54. The group formed by CARBIOS, Carbiolice and CARBIOS 54 is hereinafter referred to as the “Group”.

These IFRS financial statements for the Group have been prepared to provide high quality information in line with that of similar companies and based on international standards.

Outlook
Given the progress made by the Group during 2023 and the success of the financing operation closed in July 2023 as well as the received grants, CARBIOS confirms its operating targets and the provisional calendar of the industrial and commercial deployment of its PET biorecycling technology.
2024  • Construction of the Longlaville plant further to permits obtained in October 2023
2024  • Recruitment of plant operations team and training at demonstration facility
2026  • First significant deliveries to clients

Alongside this project, CARBIOS aims to sign its first licensing contracts for its PET biorecycling technology in 2024.

National Council of Textile Organizations (NCTO) Chairman Norman Chapman delivered the trade association’s State of the U.S. Textile Industry overview at NCTO’s 20th Annual Meeting on April 11.

Mr. Chapman’s speech highlighted the severe economic challenges confronting the U.S. textile industry that have been exacerbated by predatory trade behavior and customs fraud that is harming this vital and strategic domestic supply chain. He also highlighted NCTO’s effective advocacy efforts that resulted in a long list of accomplishments to counter some of the damaging illegal trade practices and bolster the industry.

“While the domestic textile industry is a key contributor to the U.S. economy and a critical part of the military and public health industrial base, our sector is facing a crisis of historic proportions as the result of rapidly deteriorating market conditions coupled with unchecked foreign predatory trade practices and diminished customs enforcement activities, Chapman stated in the speech. “At the end of the day, some key fundamentals for the U.S. textile industry remained sound, while others weakened. While we expect to see ongoing challenges this year, which will test our resolve, we know collectively as an industry this will not weaken our resilience or our innovative spirit.”

Two new research labs are being built by AkzoNobel at its Sassenheim site in the Netherlands to further propel the company’s product development.

Work is about to start on building a technology center for Powder Coatings, while a new polymer lab has just opened which will develop innovative resin technologies for all the company’s businesses.

The total investment in the Sassenheim site – AkzoNobel’s largest global R&D center – amounts to around €8 million. The facility already houses the biggest R&D teams in Europe for the company’s Decorative Paint and Automotive and Specialty Coatings businesses. The addition of the two new labs will help the company further build on its global reputation for product development focused on providing creative solutions for customers.

The recently opened polymer lab – part of the company’s Research organization – will accommodate 15 scientists. It will mainly focus on the development of more sustainable polymer technologies and new coatings to support AkzoNobel’s ambition to halve carbon emissions across the value chain by 2030.

AkzoNobel employs around 3,000 R&D professionals worldwide in 70 laboratories, with more than €1.25 billion having been spent on research and development over the last five years.

Die Textildruckerei Mayer heißt von nun an “Mayer GmbH TechConcepts”. Das Unternehmen hat im Jahr seines 50-jährigen Bestehens die Umfirmierung vollzogen, die dem Wandel des Portfolios Rechnung trägt. Im Jahr 1974 war Unternehmensgründer Heinrich Mayer mit klassischem Textildruck in den Markt eingetreten. Heute bietet Mayer TechConcepts unter der Leitung von Michael Steidle, Schwiegersohn des Gründers, Lösungen im Bereich der Sensorik, Aktorik sowie 3D-Hartbeschichtungen an.

Zusammen mit seiner Frau Claudia führt er die Mayer GmbH TechConcepts, wie das Unternehmen offiziell seit Ende Februar 2024 heißt, in zweiter Generation. Textilien sind zwar weiterhin Teil des Portfolios, die Bandbreite wurde jedoch deutlich vergrößert. Beschichtet werden auch andere Materialien von Plastik und Metallen bis Kunstleder.

Das Unternehmen lebt von seinen technischen Lösungen. Neben Keramikbeschichtung sind das vor allem Flächenlösungen mit Sensorik, beispielsweise ein leicht formbares Material ausgestattet mit einem flächigen Drucksensor, welches bei medizinischen Geräten zum Einsatz kommt. Ein anderes Beispiel ist eine Flächenheizung, die durch Druck aktiviert wird.

Ende April zeigt Mayer TechConcepts auf der Techtextil in Frankfurt seine neusten Entwicklungen. Dazu gehören ultradünne, flexible Sensorflächen, die das Unternehmen im Endlosdruck herstellt. Sie eignen sich beispielsweise für eine automatische Abschaltlösung bei medizinischen Geräten. Mit Sensorik und Aktorik ausgestattete Flächenlösungen bis 1,6 m² finden außerdem als hochwertige und smarte Auto-Interieurs ihre Anwendung. Des Weiteren präsentiert das Unternehmen seine neuen Bio-Polyurethane, die Mayer TechConcepts für seine patentierte CERAPUR Keramikbeschichtung einsetzt.

The John Lewis Partnership announces the appointment of Jason Tarry as its seventh Chairman following Sharon White’s decision to step down at the end of her term.

Jason brings over 33 years of experience at Tesco where he was most recently the UK & Ireland CEO, a role he held for six years. His experience spans grocery, general merchandise and fashion in senior commercial, operational and general management positions, having joined the Tesco graduate programme in 1990.

In addition to delivering market leading grocery performance in the UK, he led the expansion of F&F Clothing across Europe as Group CEO. Jason is expected to take up the role in September, at which point Sharon will step down and support the transition as required.

Rita Clifton, Deputy Chairman and Chair of the Nomination Committee, said: “The Board extends its huge thanks to Sharon for successfully leading the Partnership through one of the most testing periods in its history - first Covid and then the cost of living crisis. She has faced into the toughest decisions and overseen the Partnership's financial recovery; we are in good financial health with a return to profit, and have a strong balance sheet with record investment planned this year. Sharon has also helped ensure that employee ownership of the Partnership is secure, is demonstrably focused on its purpose as a force for good and with an open and inclusive culture.

“As the Partnership moves into the next phase of its modernisation focused on our core retail business as well future growth, we are confident that Jason will provide the kind of inspirational leadership, a proven track record in multi-channel, multi-category retail success and a strong identification with Partnership values that we are seeking in this role. Jason has impressed everyone throughout the interview process with his warmth, his belief in the Partnership’s ideals and democratic principles and his appreciation for our unique and special brands.”

Das Modeunternehmen „Sara Linke GmbH“ hat wieder eine Zukunft außerhalb der Insolvenz: Die Gläubiger haben einstimmig den Insolvenzplan angenommen und damit den Weg freigemacht für die Aufhebung des Verfahrens. Das Unternehmen wird sich künftig auf die Vermarktung der eigenen Designer-Kollektion „Sara Linke“ konzentrieren sowie Dienstleistungen für Kunden aus der Textil- und Bekleidungsbranche anbieten.

Grundlage für den Sanierungsplan ist eine neue strategische Ausrichtung des Unternehmens: So wird die Sara Linke GmbH künftig keine eigene Produktion mehr unterhalten und sich auf zwei Geschäftsbereiche konzentrieren: Zum einen den Vertrieb des erfolgreichen eigenen Designerlabels „Sara Linke“, das über den Onlineshop www.saralinke.com sowie weitere Online-Plattformen, Boutiquen und Shop-in-Shop-Geschäfte angeboten wird. Die neue Sommerkollektion wird Mitte April an den Start gehen.

Das zweite Standbein bilden Dienstleistungen rund um Design, Entwicklung und Produktion für Textil- und Bekleidungsunternehmen. Dieser Geschäftsbereich wird künftig unter „Studio 1912“ firmieren. Die neue Homepage ist bereits online, der neue Standort in Zwickau wird am 12. April eröffnet. „Mit der neuen strategischen Ausrichtung können wir unser Design- und Produktions-Know-how Dritten als Dienstleistung zugänglich machen und gleichzeitig unser eigenes erfolgreiches Label für extrovertierte Designermode weiter voranbringen“, so Geschäftsführerin Sara Linke.

Die Sara Linke GmbH hatte im März 2023 ein Insolvenzverfahren in Eigenverwaltung beantragt. Hintergrund waren die Auswirkungen der Corona-Pandemie auf den Textil-Einzelhandel sowie gestiegene Kosten für Material und Personal, die vor allem die Produktion belasteten. Im Zuge des Eigenverwaltungsverfahrens wurde das Unternehmen strategisch neu und mit einer schlankeren Kostenstruktur ausgerichtet.

Archroma launched the ONE WAY+ to help mills and brands to improve their productivity and efficiency, and to reduce their environmental impact.

The program is a three-phase process of establishing the baseline, process design and implementation, and ongoing improvement. Tailor-made for selected customers, it draws on the expertise of a curated team of Archroma processing experts and leverages specialist tools and technologies, including Archroma’s ONE WAY Impact Calculator combined with Sustainability Improvement Program.

Mills that adopt Super Systems+ through the ONE WAY+ process can expect enhanced productivity and reduced resource utilization and utilities costs; in addition, also cleaner chemistry and the co-development of new aesthetics and functionalities. Participation in the ONE WAY+ process also indicates to brand partners that mills are committed to remaining sustainable by adopting global best practices and using products that are compliant with current and future regulatory requirements.

Brands that work with Archroma under ONE WAY+ will be supported with a roadmap to their sustainability targets. They will gain a better understanding of the sustainability status of their current suppliers and how this impacts their supply chain. Ultimately, the aim is to optimize efficiencies in the supply chain and connect with suppliers that are able to meet target sustainability commitments.

From base-line audit to results review, ONE WAY+ is usually carried out over 16 weeks, with a team of two or three Archroma experts working closely with the customer’s technical teams. Results achieved so far include the following:

• A textile mill in China, serving a top international sports and athleisure brand, cut its processing time by 30% while reducing water and steam requirements by 40% and achieving a 10% RFT improvement; and
• A textile mill in Peru, serving a leading American luxury fashion house, reduced water and steam usage by 20% while slashing processing time by 30%.
• A textile mill in Argentina, serving casual wear and performance apparel brands, reduced water consumption by 40% and steam usage by 20%
• A textile mill in India, serving some of the world’s largest homewares brands, improved productivity by 15% while achieving 95% right first time (RFT) processing and 0.5% quality rejection.

The exhibition “Acquired! Shaping the National Design Collection” at Cooper Hewitt, Smithsonian Design Museum, which opened on 16 March, features a STOLL work that has been part of the museum’s permanent collection since 2017.

Visitors can expect more than 150 works that have been compiled from the museum’s collection and new acquisitions since 2017. The selection, which includes works by design pioneers of the recent past, also includes a highly functional balaclava from STOLL.

Blend of design and functionality.
The flat knitted balaclava from STOLL is part of an exhibition area that visualises the defining themes of our time. Alongside a hijab, it stands for considering inclusivity in design. The balaclava offers protection from extreme cold, is stylish and is the result of a combination of creativity and technology.

The balaclava integrates an NFC chip for near-field communication, a heater to warm breathable air, a positive and negative power connector and reflective strips for passive visibility, all knitted directly into the fabric. STOLL’s state-of-the-art flat knitting technology is the basis for straightforward integration. Circuits and conductive yarns can also be incorporated in a fully automated process exactly where they are needed.

Other performance features do not require additional components. A knitted-to-shape 3D design – made possible by the goring technique – offers a perfect fit by following anatomy and eliminating the need for complex tailoring.