From the Sector

Reset
9 results
09.06.2023

Archroma and COLOURizd™ collaborate to make fashion more sustainable

Archroma, a leader in specialty chemicals towards sustainable solutions, is teaming up with COLOURizd™, an innovator specializing in sustainable textile dyeing technologies, to set a new standard for the eco-friendlier production of sustainable textiles.

The new collaboration will enable fabric mills and brands to combine Archroma pigment coloration solutions with the COLOURizd™ QuantumCOLOUR™ yarn-coloring technology to produce high-quality, high-performance textiles with maximum consumer appeal and minimal environmental impact.

Conventional fiber-reactive methods of dyeing cellulosic and synthetic yarns are multi-step resource-intensive processes that use up to 95 liters of water per kilograms of colored yarn and discharge approximately 94 liters of effluent.

Archroma, a leader in specialty chemicals towards sustainable solutions, is teaming up with COLOURizd™, an innovator specializing in sustainable textile dyeing technologies, to set a new standard for the eco-friendlier production of sustainable textiles.

The new collaboration will enable fabric mills and brands to combine Archroma pigment coloration solutions with the COLOURizd™ QuantumCOLOUR™ yarn-coloring technology to produce high-quality, high-performance textiles with maximum consumer appeal and minimal environmental impact.

Conventional fiber-reactive methods of dyeing cellulosic and synthetic yarns are multi-step resource-intensive processes that use up to 95 liters of water per kilograms of colored yarn and discharge approximately 94 liters of effluent.

In contrast, the innovative QuantumCOLOUR™ process injects pigment and a binder directly into the yarn, using only 0.95 liters of water per kilograms of colored yarn while producing zero effluent. This represents an unprecedented reduction of 98% in water consumption alongside zero wastewater discharge, zero discharge of harmful chemicals, 73% decrease in carbon footprint and 50% reduction in energy use.*

With Archroma, textile manufacturers and apparel brands can add further value to the QuantumCOLOUR™ process with tailor-made system solutions, including JUST COLOR. This formaldehyde-free** pigment coloration system is based on Archroma’s revolutionary Printofix® pigment dispersions and Helizarin® binders to deliver exceptionally soft fabrics with high fastness and durability, while also enabling energy and chemical savings and higher productivity.

* As tested by Peterson Control Union
** Below limits of detection according to industry standard test methods

Source:

Archroma

(c) Lindauer DORNIER GmbH
Maja Dornier (lhs) and Prof. Dr. Wolf Mutschler (rhs) hand over the Peter Dornier Foundation Award, endowed with 5,000 euros, to the award winner Dipl.-Ing. Mathis Bruns
26.07.2022

Peter Dornier Foundation Prize 2022 honours textile research on woven heart valve

According to the World Health Organization (WHO), cardiovascular disease is one of the most common natural causes of death. Every year, it is the cause of death of around 17 million people worldwide. The Peter Dornier Foundation Prize 2022 has now awarded a research work that is to improve the medical care of people with insufficient heart valve function in the future and prolong the patients' lives.

According to the World Health Organization (WHO), cardiovascular disease is one of the most common natural causes of death. Every year, it is the cause of death of around 17 million people worldwide. The Peter Dornier Foundation Prize 2022 has now awarded a research work that is to improve the medical care of people with insufficient heart valve function in the future and prolong the patients' lives.

The human heart is a high-performance machine: over the course of a person's life, it beats almost three billion times, pumping around 200 million litres of blood through the body. Enormous stresses that can sometimes lead to life-threatening signs of wear and tear. If a heart valve gets out of step, patients usually get artificial-mechanical or biological valves as a replacement. However, mechanical solutions imply patients to take blood-thinning medication for the rest of their lives. In addition, there may be audible closing noises. For example, almost a quarter of patients with mechanical heart valves complain of sleep disturbances. Biological heart valves, on the other hand, such as those made from animal tissue, require a great deal of manual work and have a shorter lifetime.

Potential of weaving for medical products demonstrated
For this reason, Graduate Engineer Mathis Bruns at the Institute for Textile Machinery and High-Performance Textile Materials Technology (ITM) at the TU Dresden is researching an implant alternative made of fabric. As part of a research project that also involved heart surgeons from the Dresden Heart Centre and the University Hospital in Würzburg, Mr. Bruns provided important findings for weaving an artificial heart valve in his diploma thesis. For his work entitled "Development of tubular structures with integrated valve function", Mathis Bruns has now received the Peter Dornier Foundation Prize 2022, endowed with 5,000 euros. In his laudation, Dr. Adnan Wahhoud, former head of the development department of air-jet weaving machines at DORNIER in Lindau, said: "With his work, the winner of the award demonstrates very clearly the potential of weaving technology to produce fabrics of complex form, geometry and structure with the aim of prolonging and improving people's lives." The award-winning thesis enriches research into three-dimensional tissues for use in medicine.

Weaving replacement heart valves without seams
"A particular advantage of our approach is the integral production method", says foundation prize winner Mathis Bruns. “The geometry and function of a heart valve is that complex that woven heart valves could not be produced in this form previously. Through the combined use of a rigid rapier weaving machine with bobbin shield and a Jacquard machine, it is possible to weave the replacement heart valve in such a way that it no longer has be sewn together. Even the tubular structures for the blood vessels and the integrated valve function are ‘all of one piece’. Seams are always a weak point in textile medical products," Mr. Bruns adds. “Another advantage of the woven heart valve is the possibility to insert it by the help of minimally invasive surgery. Hence, the folded valve which is about the size of a tea light is to be pushed with a catheter via the bloodstream to the target position in the heart and unfolded there. The patient's chest and heart would then no longer have to be cut open”, explains prize winner Mr. Bruns.

Textile structure is similar to human tissue
A wide variety of medical products have always been produced on DORNIER weaving machines. Customers use them to produce fabrics for bandages, prostheses, blood filters and orthoses among other things. For Mathis Bruns, it is only evident that implants such as heart valves will more and more be woven on the machines from Lindau in the future. "Textile tissue is very similar to human tissue," he says. The human body consists largely of thread-like materials, just as a textile fabric is made up of thousands of individual threads. "Muscle fibres convey force impulses, nerve tracts send stimuli such as pain and brain cells convey information via thread-like dendrites and axons." Because of their ‘thread-like properties’, woven implants are therefore particularly suitable for medical applications.

(c) Sitip
21.01.2022

Sitip presents COSMOPOLITAN Fashion-tech fabrics at Milano Unica

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

Source:

Sitip / Valeria Rastrelli

Visionary building – with composite textiles by vombaur (c)vombaur
From the H-profile to the chamber structure – vombaur offers individually developed composite textiles with complex shapes
13.10.2021

Visionary building – with composite textiles by vombaur

  • Hightech textiles for future-oriented construction projects

Building shells, bridges, staircases, façades ... construction projects are exposed to enormous mechanical loads. Often there are also considerable climatic or environmental influences. This has prompted the increasing use of fibre-reinforced materials in construction projects. After all, besides many other exciting properties, they offer high mechanical rigidity, low weight and excellent corrosion resistance.

Tapes, tubulars, sections and 3D woven textiles by vombaur form the perfect basis for these innovative building materials. The seamless round or shaped woven narrow textiles made of high-performance fibres are extremely loadable because they have neither seams nor welds – and therefore no undesirable breaking points. Their surface properties are identical over the entire length. In challenging tasks, composite textiles by vombaur offer a lightweight solution that is as reliable as it is durable.

  • Hightech textiles for future-oriented construction projects

Building shells, bridges, staircases, façades ... construction projects are exposed to enormous mechanical loads. Often there are also considerable climatic or environmental influences. This has prompted the increasing use of fibre-reinforced materials in construction projects. After all, besides many other exciting properties, they offer high mechanical rigidity, low weight and excellent corrosion resistance.

Tapes, tubulars, sections and 3D woven textiles by vombaur form the perfect basis for these innovative building materials. The seamless round or shaped woven narrow textiles made of high-performance fibres are extremely loadable because they have neither seams nor welds – and therefore no undesirable breaking points. Their surface properties are identical over the entire length. In challenging tasks, composite textiles by vombaur offer a lightweight solution that is as reliable as it is durable.

Safe and durable solutions for challenging applications
The potential applications for lightweight components in the construction industry are as numerous as the project ideas of the planning and construction teams.
•    Ropes and tensioning elements made of carbon fibre reinforced plastic (CFRP)
•    Reinforcement of building structures made of concrete, steel, wood or other materials
•    Sustainable restructuring of constructions and urban districts for bridges and buildings
•    CFC slats as reinforcements in case of repairs
•    (Filled) GRP pipes made of seamless round woven tubes by vombaur as columns/pillars
•    CFRP sections as steel girder substitutes
•    Hollow profiles with individually designed cross-sections
•    Glass fibre reinforced connecting elements for glazing to minimise expansion differences between the connecting element and the glass
•    Individual light wells

Implementing visions – with composite textiles by vombaur
As your development partner, vombaur facilitates innovative composites projects for challenging applications. In innovative and safety-sensitive industries such as automotive and aviation, chemical and plant engineering.  The composites experts at vombaur develop, create samples of and manufacture woven tapes and seamless round or shaped woven textiles by vombaur – in collaboration with the customer's enterprise development teams and individually for the respective projects. This is how novel and unique lightweight components made of high-performance textiles are created for visionary lightweight construction projects.

"Fibre-reinforced composites are the ideal material for future-oriented construction projects," explains Dr.-Ing. Sven Schöfer, Head of Development and Innovation at vombaur. "Their outstanding technical properties and design possibilities open up new and fascinating perspectives for construction projects. From building construction to civil engineering, from bridge construction to interior design. As an experienced development partner for sophisticated lightweight components, we at vombaur contribute our seamless solutions to these kinds of future-oriented projects."

More information:
vombaur Composites carbon fibers
Source:

vombaur GmbH & Co. KG

Composite textiles by vombaur for innovations in architecture and the construction industry (c) vombaur
Low effort, low weight: Maintenance with fibre-reinforce materials
13.10.2021

Composite textiles by vombaur for innovations in architecture and the construction industry

  • Composites in the construction industry - The lightweight construction material of the future

Building with fibre-reinforced materials opens up completely new possibilities. In terms of engineering, design, and organisation. This is due, on the one hand, to the excellent properties of fibre-reinforced materials (FRM) and, on the other hand, to the fact that the material – unlike wood or brick, for example – is not machined or processed for its use, but custom-produced.

Excellent properties – in terms of engineering, design, and organisation
Fibre-composite materials offer a whole range of technical properties for innovative and sustainable building:
•    High mechanical rigidity
•    Low weight
•    High corrosion resistance
•    Low material fatigue
•    Low heat transfer coefficient of the plastic matrix
•    Resistance to frost and de-icing salt
•    Good draping capability

  • Composites in the construction industry - The lightweight construction material of the future

Building with fibre-reinforced materials opens up completely new possibilities. In terms of engineering, design, and organisation. This is due, on the one hand, to the excellent properties of fibre-reinforced materials (FRM) and, on the other hand, to the fact that the material – unlike wood or brick, for example – is not machined or processed for its use, but custom-produced.

Excellent properties – in terms of engineering, design, and organisation
Fibre-composite materials offer a whole range of technical properties for innovative and sustainable building:
•    High mechanical rigidity
•    Low weight
•    High corrosion resistance
•    Low material fatigue
•    Low heat transfer coefficient of the plastic matrix
•    Resistance to frost and de-icing salt
•    Good draping capability

In addition, fibre composites offer numerous design options for novel and exceptional new building and maintenance projects:
•    Unique variety of shapes
•    Different structures of the textiles
•    Large spectrum of colours and colour combinations
•    Translucency of the plastic matrix
Thanks to these properties, composites can be used to produce coloured, phosphorescent, thermochromic or – through the use of LEDs or light-conducting fibres permanently integrated into the matrix – luminescent components.

In addition, there are organisational benefits for planning, construction and maintenance work with fibre-reinforced materials:
•    Easier handling and assembly of the far lighter and more flexible components – compared with steel, concrete or wood
•    Faster installation
•    Shorter construction site times in road and bridge maintenance
•    Shorter delivery times
•    Ability to integrate electronic monitoring systems

Individual composite textiles – for every lightweight engineering project
The composites experts at vombaur develop and manufacture woven tapes and seamless round or shaped woven textiles from carbon, glass, flax or other high-performance fibres on special weaving lines for individually specified round and shaped woven textiles – and can therefore offer you the best possible fibre base for every lightweight construction project.

"Regardless of whether it's a new construction or a renovation project, a façade design, a bridge or a staircase – as your development partner for composite textiles, we have plenty of experience with composites for demanding tasks," emphasises Dr.-Ing. Sven Schöfer, Head of Development and Innovation at vombaur. "We develop, create samples and manufacture woven tapes and seamless round or shaped woven textiles – in collaboration with the customer enterprise development teams and individually for the respective projects." This is how novel and unique lightweight components made of high-performance textiles are created for visionary projects.

Huntsman Textile Effects and Sciessent Partnership (c)Huntsmann
Performance and Protection
02.03.2021

Huntsman Textile Effects and Sciessent Partnership

  • Partner to Enable Sustainable Microbe- and Odor-Resistant Textiles
  • Huntsman Now Delivers Complete End-to-End System for Protection Effects

SINGAPORE – Huntsman Textile Effects and Sciessent have entered into a strategic partnership to bring revolutionary antimicrobial and odor-control solutions to textile mills and brands worldwide. As consumers around the world begin paying more attention to health and hygiene, Huntsman Textile Effects and Sciessent will cooperate to help mills and brands deliver active wear, outerwear, home textiles and other products with long-lasting protection against microbial growth and odor. Huntsman Textile Effects will also become the exclusive distribution partner of Sciessent’s Agion® Antimicrobial*, Lava XL® anti-odor solution, and dual-action Active XL®.

  • Partner to Enable Sustainable Microbe- and Odor-Resistant Textiles
  • Huntsman Now Delivers Complete End-to-End System for Protection Effects

SINGAPORE – Huntsman Textile Effects and Sciessent have entered into a strategic partnership to bring revolutionary antimicrobial and odor-control solutions to textile mills and brands worldwide. As consumers around the world begin paying more attention to health and hygiene, Huntsman Textile Effects and Sciessent will cooperate to help mills and brands deliver active wear, outerwear, home textiles and other products with long-lasting protection against microbial growth and odor. Huntsman Textile Effects will also become the exclusive distribution partner of Sciessent’s Agion® Antimicrobial*, Lava XL® anti-odor solution, and dual-action Active XL®.

“Both Huntsman Textile Effects and Sciessent share a deep commitment to innovation, environmental sustainability and customer service. As partners, our joint goal is to offer the highest level of protection for textiles so that they stay fresher for longer,” said Rohit Aggarwal, President of Huntsman Textile Effects. “Huntsman Textile Effects now has one of the industry’s most complete end-to-end systems for high-performance protection effects, with a full range of innovative and sustainable protection and comfort technologies from pre-treatment to coloration and finishing.”

“Our presence in the global textile and apparel market has been rapidly expanding based on the strength of our solution set and reputation for delivering an exceptional customer experience,” said Sciessent CEO Paul C. Ford. “Through this partnership, we are both extending our reach to manufacturers and enhancing our offerings by coupling them with Huntsman Textile Effects’ broad range of innovative and sustainable protection technologies. It is a great opportunity for manufacturers to differentiate their products through the combined strength of our brands.”

Sciessent is recognized for the proven effectiveness and safety of its antimicrobial and anti-odor technologies throughout the global textile and apparel industry.

Sciessent Agion® Antimicrobial is the industry-leading antimicrobial solution. Designed with smart-release technology, it delivers long-lasting protection by releasing its active antimicrobial agents only when needed. It can be built-in or applied via padding, exhaust or package yarn to any textile alongside other functional finishes, dyes, inks and pre-treatments. Durable up to 100 home washes, Agion® is also customizable to meet brands’ performance and cost goals. Agion® Antimicrobial has been used on FDA-approved medical devices.*

Sciessent Lava XL® is a next-generation non-bioactive odor-control solution, ideal for sportwear and athleisure wear. While other odor-control technologies capture odors and release them during laundering, Lava XL®’s triple action technology utilizes zeolite minerals with a large surface area to capture, absorb and degrade odors as they pass through the fabric.

Sciessent Agion Active XL® combines the advanced dual technologies of Agion® Antimicrobial and Lava XL® to deliver outstanding odor protection. The antimicrobial fights odor-causing bacteria on the garment, while the odor-control solution captures odor generated by sweat on the skin. The result is that garments smell fresher for longer and sustain a high level of performance for more wears.

The Sciessent solutions are easily integrated into the finishing process and can be combined with a range of other finishes, including Huntsman Textile Effects’ durable water repellents and comfort systems to cost-effectively produce high-performance textile products that are safe and sustainable.

Huntsman Textile Effects and Sciessent both champion environmentally responsible products that help the textile industry meet its regulatory obligations and the expectations of the world’s most exacting brands and consumers. The Agion®, Lava XL® and Active XL® products are all bluesign® approved and listed on the Zero Discharge of Hazardous Chemicals (ZDHC) Foundation ZDHC Gateway, complying with ZDHC Level 3 requirements.

*The Agion® Antimicrobial is presently registered by the United States Environmental Protection Agency as a preservative and bacteriostatic agent for use in treated articles under 40 CFR 152.25a. The information presented herein is not intended to support or endorse public health claims for treated articles. The Agion® Antimicrobial is also used in medical devices under the Food and Drug Administration; those medical device claims are based on safety and efficacy testing and are limited to those approved by FDA.

3XDRY®-Technologie von schoeller®: Die Aussenseite eines Textils ist wasserabweisend (c) Schoeller Textil AG
3XDRY®-Technologie von schoeller®: Die Aussenseite eines Textils ist wasserabweisend
11.02.2020

Popular all-in-one garments feature 3XDRY® textile technology from schoeller®

Today’s consumers demand versatility in their apparel, whether they’re shopping for work, sports or leisure wear. Work wear is no longer just about style, and sports and leisure wear is no longer just about stretch, while the demands for high-performance textiles in every category continue to increase. More and more consumer brands are looking to Schoeller’s established technologies to deliver not only beautiful fabrics that offer comfort and style but also breathability and the best in water and dirt repellence to their customers.

3XDRY® finishing technology from schoeller® allows the exterior of a textile to be water repellent, while the inside absorbs moisture and quickly distributes it over the surface. As a result, textiles with 3XDRY® dry much faster in comparison to conventional textiles. Since the launch of 3XDRY® in 2001, the technology has proven performance focused mostly on sportswear. Now that demands within the fashion industry are also trending toward performance textiles, more of its apparel brands are also turning to the patented 3XDRY® technology’s reliability and versatility for functional jackets, pants and shirts.

Today’s consumers demand versatility in their apparel, whether they’re shopping for work, sports or leisure wear. Work wear is no longer just about style, and sports and leisure wear is no longer just about stretch, while the demands for high-performance textiles in every category continue to increase. More and more consumer brands are looking to Schoeller’s established technologies to deliver not only beautiful fabrics that offer comfort and style but also breathability and the best in water and dirt repellence to their customers.

3XDRY® finishing technology from schoeller® allows the exterior of a textile to be water repellent, while the inside absorbs moisture and quickly distributes it over the surface. As a result, textiles with 3XDRY® dry much faster in comparison to conventional textiles. Since the launch of 3XDRY® in 2001, the technology has proven performance focused mostly on sportswear. Now that demands within the fashion industry are also trending toward performance textiles, more of its apparel brands are also turning to the patented 3XDRY® technology’s reliability and versatility for functional jackets, pants and shirts.

More information:
Schoeller
Source:

schoeller®

Run like the wind (c) Huntsman
04.09.2019

HUNTSMAN INTRODUCES HIGH IQ® COOL COMFORT

  • Performance assurance program for textiles with advanced moisture management technology

Huntsman Textile Effects has extended its HIGH IQ® performance assurance program to help mills, brands and retailers meet consumer demand for garments with durable moisture management. HIGH IQ® Cool Comfort performance program is built on the industry’s broadest and most advanced moisture management agents to deliver durable, long-lasting performance.
As consumers around the world adopt more active lifestyles and outdoor activities, the need for cool, dry and comfortable sports and athleisure wear is on an upward trend.
HIGH IQ® Cool Comfort performance program allows garments to breathe, while at the same time, transports moisture away from the body. This ensures consumers can stay cool, dry and fresh throughout. The unique technology supports accelerated evaporation, ensuring garments dry quickly for long-lasting comfort.

  • Performance assurance program for textiles with advanced moisture management technology

Huntsman Textile Effects has extended its HIGH IQ® performance assurance program to help mills, brands and retailers meet consumer demand for garments with durable moisture management. HIGH IQ® Cool Comfort performance program is built on the industry’s broadest and most advanced moisture management agents to deliver durable, long-lasting performance.
As consumers around the world adopt more active lifestyles and outdoor activities, the need for cool, dry and comfortable sports and athleisure wear is on an upward trend.
HIGH IQ® Cool Comfort performance program allows garments to breathe, while at the same time, transports moisture away from the body. This ensures consumers can stay cool, dry and fresh throughout. The unique technology supports accelerated evaporation, ensuring garments dry quickly for long-lasting comfort.

“Today’s consumer seeks comfort and performance in their active lifestyle. With Huntsman’s HIGH IQ® Cool Comfort performance assurance program, we offer durable moisture management so your garment remains breathable, stays cool and attains the comfort of cotton. Unique quick-dry properties created by the natural microclimate of the garment help to reduce post-exercise chill, making the effects highly suitable for sports and active wear,” said Lee Howarth, Global Marketing Manager, Huntsman Textile Effects.
Only mills that meet Huntsman’s stringent requirements earn the right to use the HIGH IQ® performance assurance hang tags as point-of-sale product branding. Updated hangtags and promotional materials are available to support mills and brands in communicating the benefits of the HIGH IQ® Cool Comfort performance assurance program.

The technology that drives the HIGH IQ® Cool Comfort program complies with the requirements of bluesign® for safe and sustainable textile production. Furthermore, fabrics produced with HIGH IQ® Cool Comfort moisture management are suitable for STANDARD 100 by OEKO-TEX® certified textile products. The global leader in intelligent effects, Huntsman Textile Effects developed the HIGH IQ® global performance assurance program to help mills, brands and retailers produce high-performance textiles with built-in sun protection, freshness, friction protection and water repellence, in bright whites and color that lasts. The program is based on innovative dyes and effects and unparalleled technical support and application know-how from Huntsman Textile Effects to help mills improve their productivity and competitiveness.
 

(c) VDMA. Caption from left to right: Eric Otto, Prof. Thomas Gries, M.Sc. Susanne Fischer, Prof. Klaus Meier, Dr. Benjamin Weise, Prof. Gunnar Seide, Alon Tal, Jan Merlin Abram, Peter D. Dornier
25.09.2018

VDMA Textile Machinery c/o Walter Reiners Foundation awards five young engineers with a total of 17,500 EURO

Peter D. Dornier, member of the Executive Board of the VDMA Textile Machinery Federation and Chairman of the Walter Reiners Foundation for the Promotion of Young Engineers, honours five young talents. Numerous entrepreneurs and managers from the German textile machinery industry took part in the award ceremony at the Digital Capability Center (DCC) in Aachen, Germany.

The prizewinner in the dissertation category, Dr.- Ing. Benjamin Weise, comes from the Institute of Textile Technology at RWTH Aachen University (ITA). He has dealt with a complex production process for the manufacture of modified multifilament yarns, which offers new perspectives for the development and manufacture of textile charge carriers.

Peter D. Dornier, member of the Executive Board of the VDMA Textile Machinery Federation and Chairman of the Walter Reiners Foundation for the Promotion of Young Engineers, honours five young talents. Numerous entrepreneurs and managers from the German textile machinery industry took part in the award ceremony at the Digital Capability Center (DCC) in Aachen, Germany.

The prizewinner in the dissertation category, Dr.- Ing. Benjamin Weise, comes from the Institute of Textile Technology at RWTH Aachen University (ITA). He has dealt with a complex production process for the manufacture of modified multifilament yarns, which offers new perspectives for the development and manufacture of textile charge carriers.

M.Sc. Susanne Fischer, winner of the Master's thesis category, has systematically and comprehensively solved the challenging task of integrating motion sensors into a finger glove at Reutlingen University.
The 2018 creativity award winners are team Mr. Jan Merlin Abram and Mr. Alon Tal from ITA Aachen as well as Mr. Eric Otto from the Institute for Textile Machinery and High-Performance Textile Materials Technology (ITM) in Dresden. The students Abram and Tal have developed a guideline for the design of hybrid morphing textiles. In addition to the classic functions in conventional and, in particular, composite applications, locally defined, functionally effective joint, torsion, expansion and compression mechanisms can be integrated into the textile.

The prizewinner Otto is awarded for a concept study for the development of a circular knitting machine with a variable diameter needle cylinder, which can lead to further flexibility in the circular knitting process.

More information:
VDMA Walter-Reiners-Stiftung
Source:

VDMA
Textilmaschinen