From the Sector

Reset
6 results
15.11.2024

Rieter Places Bond for a Total of CHF 65 Million

October, 30 Rieter has placed a bond of CHF 65 million with a term of five years and a coupon of 3.5%. The net proceeds of the issue will be used for general corporate purposes. “The bond also extends the maturity profile of our debt financing and increases the diversification of the investor base as well as our strategic flexibility,” said Oliver Streuli, Rieter Group CFO.

The bond was issued by UBS, Zürcher Kantonalbank, Commerzbank and Basler Kantonalbank. The bond will be listed on the SIX Swiss Exchange.

October, 30 Rieter has placed a bond of CHF 65 million with a term of five years and a coupon of 3.5%. The net proceeds of the issue will be used for general corporate purposes. “The bond also extends the maturity profile of our debt financing and increases the diversification of the investor base as well as our strategic flexibility,” said Oliver Streuli, Rieter Group CFO.

The bond was issued by UBS, Zürcher Kantonalbank, Commerzbank and Basler Kantonalbank. The bond will be listed on the SIX Swiss Exchange.

More information:
Rieter bond
Source:

Rieter AG

05.11.2024

Africa Textile Renaissance Plan: New era of textile manufacturing

ARISE IIP, the pan-African developer and operator of world-class industrial parks, has partnered with African Export-Import Bank (Afreximbank) and Rieter, the supplier of systems for manufacturing yarn from staple fibers in spinning mills. The unprecedented partnership will spearhead the “Africa Textile Renaissance Plan” – a transformative initiative aimed at revitalizing the continent’s textile sector. This ambitious project will leverage ARISE’s extensive network of industrial parks to support a new era of textile manufacturing in Africa.

In order to facilitate the implementation of the Africa Textile Renaissance Plan, Afreximbank, Arise IIP and Rieter AG signed a framework agreement on October 14, 2024. The framework agreement outlines the collaboration to establish 500 000 metric tons of African cotton transformation capacity over the next three to five years, supported by USD 5 billion in financing.

The Africa Textile Renaissance Plan aims to achieve the following key objectives:

ARISE IIP, the pan-African developer and operator of world-class industrial parks, has partnered with African Export-Import Bank (Afreximbank) and Rieter, the supplier of systems for manufacturing yarn from staple fibers in spinning mills. The unprecedented partnership will spearhead the “Africa Textile Renaissance Plan” – a transformative initiative aimed at revitalizing the continent’s textile sector. This ambitious project will leverage ARISE’s extensive network of industrial parks to support a new era of textile manufacturing in Africa.

In order to facilitate the implementation of the Africa Textile Renaissance Plan, Afreximbank, Arise IIP and Rieter AG signed a framework agreement on October 14, 2024. The framework agreement outlines the collaboration to establish 500 000 metric tons of African cotton transformation capacity over the next three to five years, supported by USD 5 billion in financing.

The Africa Textile Renaissance Plan aims to achieve the following key objectives:

  • establish 500 000 metric tons of African cotton transformation capacity over the next three to five years, with potential expansion of an additional 500 000 metric tons,
  • localize machine repair expertise in Africa,
  • create up to 500 000 jobs,
  • reduce Africa’s annual textile imports,
  • boost exports to the US under the African Growth and Opportunity Act (AGOA), focusing on full value addition within the continent and to export to the rest of the world and
  • develop a strong financing structure to support capacity building.

Countries benefiting from the program will be selected based on criteria such as power and gas availability, and textile parks with standard infrastructure or equity contribution. Training centers will be established in selected countries to develop and improve skill levels.

The partnership aims to secure financing of textile projects, streamlining the process through:

  • standardized loan documentation and security packages,
  • expedited two-month application process and
  • standardized business plan templates.

To foster long-term growth, Rieter has committed to gradually establishing a manufacturing presence in Africa subject to commercial viability, including the:

  • setup of a repair and maintenance facility in ARISE’s industrial park in Benin,
  • establishment of spare parts warehousing and
  • phased introduction of machine assembly operations.

Gagan Gupta, CEO and Founder of ARISE IIP expressed his enthusiasm for the project: “The Africa Textile Renaissance Plan represents a significant milestone in the continent’s industrial development. I’m convinced that this initiative will not only boost local manufacturing and create thousands of jobs but also position Africa as a global leader in sustainable textile production.”

Prof. Benedict Oramah, President and Chairman of the Board of Directors of Afreximbank, stated that the Africa Textile Renaissance Plan is a “game-changer” for African trade. He remarked: “By transforming Africa’s cotton into high-value textile products, we are not only driving industrialization but also reducing dependence on imports while building a competitive export base. This partnership complements our ongoing efforts, such as the transformative change we are spearheading in Africa’s Cotton-4 plus (C4+) countries, alongside other partners. It underscores Afreximbank’s unwavering commitment to industrialization and export development.”

Thomas Oetterli, CEO Rieter Group, said: “We are thrilled to support this important initiative with our commitment, expertise and consulting knowledge. We are convinced that the Africa Textile Renaissance Plan marks an important starting point for the future development of the textile industry in Africa.”

Source:

Rieter AG

30.10.2024

Rieter Places Bond for a Total of CHF 65 Million

Rieter has placed a bond of CHF 65 million with a term of five years and a coupon of 3.5%. The net proceeds of the issue will be used for general corporate purposes. “The bond also extends the maturity profile of our debt financing and increases the diversification of the investor base as well as our strategic flexibility,” said Oliver Streuli, Rieter Group CFO.

The bond was issued by UBS, Zürcher Kantonalbank, Commerzbank and Basler Kantonalbank. The bond will be listed on the SIX Swiss Exchange.

Rieter has placed a bond of CHF 65 million with a term of five years and a coupon of 3.5%. The net proceeds of the issue will be used for general corporate purposes. “The bond also extends the maturity profile of our debt financing and increases the diversification of the investor base as well as our strategic flexibility,” said Oliver Streuli, Rieter Group CFO.

The bond was issued by UBS, Zürcher Kantonalbank, Commerzbank and Basler Kantonalbank. The bond will be listed on the SIX Swiss Exchange.

More information:
bond Rieter Holding AG
Source:

Rieter AG

Manjushree Group enters Indian nonwovens market with Reifenhäuser Reicofil line (c) Reifenhäuser GmbH & Co. KG Maschinenfabrik
06.10.2023

Manjushree Group enters Indian nonwovens market with Reifenhäuser Reicofil line

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

After four decades in the packaging industry, the Manjushree Group is entering the Indian nonwovens market. The entrepreneurs rely on a flexible RF Smart Composite line from Reifenhäuser Reicofil to meet very different customer requirements.

The Manjushree Group operated a blown film line for packaging materials for the tea industry in the eastern part of India as early as 1983. In the years that followed, Manjushree Technopack Ltd. developed into one of the largest suppliers of solutions for rigid plastic products in South Asia - and the family business grew into a group with several business segments. In 2018, the entrepreneurial family repositioned itself: it sold its previous core business to a financial investor and established Manjushree Ventures with footholds in start-up financing, real estate business, and manufacturing - the largest of which is Manjushree Spntek as a producer of high-quality spunmelted fabrics.

Since February 2023, Manjushree Spntek has been producing high-performance spunmelts on an RF Smart Composite line from Reifenhäuser Reicofil - benefiting both from many years of experience in the packaging industry and from experience with Reifenhäuser's blown film lines. "We know a lot about plastic extrusion, for example when it comes to line operating parameters such as temperature and pressure. Processing is similar in both industries," explains Rajat Kedia. "The main difference is the distribution of the products: In plastic packaging, we had an established customer base and sold a lot of material to the big consumer goods manufacturers. The nonwovens market in India, on the other hand, is still forming, with thousands of small companies currently getting involved." These serve customers in their regions, such as hospitals.

The RF Smart Composite line is a standardized spunmelt line for smaller and emerging markets. The line produces nonwovens of the highest Reicofil quality with appropriately adapted throughput. This makes it ideally suited for applications in hygiene and medical technology and, with typically 8,200 annual production hours, it is extremely reliable. In addition, operators can start production quickly because in many cases the line can be integrated into existing buildings.

Before production could start, Manjushree built a new production building in Bidadi, a town an hour's drive from Bangalore International Airport. The building is designed to be sustainable: It uses natural light and fresh air, has comprehensive contamination control, and obtains almost all of its energy from renewable sources. Reifenhäuser Reicofil then installed, commissioned and tested the RF Smart Composite line.

Since February 2023, Manjushree Spntek has been producing high-quality spunmelted nonwovens, including ultra-soft fabrics and fabrics with special coatings for customers in the hygiene and medical industries. The material can be used, for example, for baby diapers and feminine hygiene products, but also for medical articles ranging from surgical gowns to surgical drapes.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

09.03.2023

Rieter AG closes financial year 2022 with record sales

  • Sales of CHF 1 510.9 million,
  • Order intake of CHF 1 157.3 million in 2022; order backlog of around CHF 1 540 million as of December 31, 2022
  • EBIT margin of 2.1%
  • Implementation of action plan to increase profitability ongoing
  • Dividend of CHF 1.50 per share proposed

With record sales of CHF 1 510.9 million, Rieter achieved an increase of 56% compared with the previous year (2021: CHF 969.2 million). In the second half of 2022, especially in the fourth quarter, the measures introduced to address material bottlenecks had a positive impact. Consequently, sales increased to CHF 890.3 million compared with the first six months (first half-year 2022: CHF 620.6 million).

  • Sales of CHF 1 510.9 million,
  • Order intake of CHF 1 157.3 million in 2022; order backlog of around CHF 1 540 million as of December 31, 2022
  • EBIT margin of 2.1%
  • Implementation of action plan to increase profitability ongoing
  • Dividend of CHF 1.50 per share proposed

With record sales of CHF 1 510.9 million, Rieter achieved an increase of 56% compared with the previous year (2021: CHF 969.2 million). In the second half of 2022, especially in the fourth quarter, the measures introduced to address material bottlenecks had a positive impact. Consequently, sales increased to CHF 890.3 million compared with the first six months (first half-year 2022: CHF 620.6 million).

Order intake was CHF 1 157.3 million in 2022 (2021: CHF 2 225.7 million) and thus remained at a high level thanks to the company’s technological lead and broad international presence. The market situation, especially in the second half of 2022, was characterized by investment restraint and below-average capacity utilization at spinning mills due to geopolitical uncertainties, rising financing costs, and consumer reticence in important markets.
The company had an order backlog of around CHF 1 540 million at the end of 2022, which thus extends into 2023 and 2024.

The profit at the EBIT level in the 2022 financial year was CHF 32.2 million (2021: CHF 47.6 million). The result was strongly influenced by substantial cost increases, which could only be offset in part through price increases or other remedial measures. In addition, to compensate for material shortages, expenses were incurred in connection with the development of alternative solutions, and in relation to the acquired businesses.

Completion of the Acquisition
Rieter consolidated the acquired automatic winding machine business with effect from April 1, 2022. This acquisition completes Rieter’s system offering in the largest market segment of ring and compact spinning, thus significantly strengthening the company’s market position.

Action Plan to Increase Profitability
Implementation of the action plan to increase profitability is ongoing. With regard to the margins for the order backlog, which remains high, the already implemented price increases in combination with a positive trend in costs, particularly in logistics, are having a favorable impact. In addition, progress was made in eliminating material bottlenecks and reducing expenses for the three acquired businesses.

Dividend
The Board of Directors proposes to the shareholders the distribution of a dividend of CHF 1.50 per share for 2022. This corresponds to a payout ratio of 56%.

Outlook
For the coming months, Rieter expects below-average demand for new equipment at first, with a revival expected in the second half of 2023 after ITMA, the leading trade fair in Milan (Italy). Rieter also believes that demand for consumables, wear & tear and spare parts will recover during 2023.
For the 2023 financial year, due to the high order backlog, Rieter anticipates sales in the order of magnitude of the previous year.
The realization of sales from the order backlog continues to be associated with risks in connection with the ongoing geopolitical uncertainties, rising financing costs, continuing bottlenecks in the supply chains, and possible, currently unforeseeable consequences of the earthquake in Türkiye in February 2023. Despite the price increases already implemented, further global cost increases continue to pose a risk to the growth of profitability. Rieter will specify the outlook in the 2023 semi-annual report.

Source:

Rieter Holding AG

04.11.2022

Rieter publishes Investor Update 2022

  • Sales of CHF 366.8 million in the third quarter, CHF 987.4 million after nine months
  • Order intake of CHF 226.4 million in the third quarter, CHF 1 095.8 million after nine months
  • Order backlog of around CHF 2 000 million as of September 30, 2022
  • Precautionary measures taken against potential energy crisis in Europe
  • Financing of a Professorship for Artificial Intelligence
  • Rieter site sales process on schedule
  • Outlook 2022

Rieter recorded a significant increase in sales in the third quarter of 2022, reaching a level of CHF 366.8 million (2021: CHF 257.3 million). The measures introduced to increase sales and profitability in the second half of 2022 are taking effect and will continue to be implemented in a systematic manner. These include a close cooperation with key suppliers, the development of alternative solutions to eliminate material shortages, the enforcement of price increases, and the improvement of the margin quality of the order backlog.

  • Sales of CHF 366.8 million in the third quarter, CHF 987.4 million after nine months
  • Order intake of CHF 226.4 million in the third quarter, CHF 1 095.8 million after nine months
  • Order backlog of around CHF 2 000 million as of September 30, 2022
  • Precautionary measures taken against potential energy crisis in Europe
  • Financing of a Professorship for Artificial Intelligence
  • Rieter site sales process on schedule
  • Outlook 2022

Rieter recorded a significant increase in sales in the third quarter of 2022, reaching a level of CHF 366.8 million (2021: CHF 257.3 million). The measures introduced to increase sales and profitability in the second half of 2022 are taking effect and will continue to be implemented in a systematic manner. These include a close cooperation with key suppliers, the development of alternative solutions to eliminate material shortages, the enforcement of price increases, and the improvement of the margin quality of the order backlog.

The order intake of CHF 226.4 million in the third quarter of 2022 reflects the expected normalization of demand for new equipment compared to the record year of 2021, which was characterized by catch-up effects and the regional shift in demand. In addition, the well-known uncertainties and risks and the continuing extremely long delivery times at key manufacturers had a dampening effect on demand. Due to the slowdown in capacity utilization in the spinning mills, demand for consumables, wear & tear and spare parts also declined in the third quarter of 2022. Major orders continued to be recorded from Turkey, Uzbekistan, and China.

Rieter has a high order backlog of around CHF 2 000 million as of September 30, 2022 (September 30, 2021: CHF 1 562 million), which will guarantee capacity utilization in all three business groups until well into 2023 or rather 2024. The cancellation rate in the reporting period was around 5% of the order backlog.

Outlook 2022
Rieter anticipates weakened demand for new systems in the coming months. The demand for consumables, wear & tear and spare parts will depend on the capacity utilization of spinning mills in the months ahead.

For the full year 2022, Rieter expects sales of around CHF 1 400 million. The realization of sales revenue from the order backlog continues to be associated with risks in relation to the well-known uncertainties.

Despite significantly higher sales compared to the prior-year period, Rieter expects EBIT and net result for 2022 to be below the previous year’s level. This is due to the considerable increases in the cost of materials and logistics, additional costs for compensation of material shortages as well as expenses in connection with the acquisition in the years 2021/2022.

More information:
Rieter financial year 2022
Source:

Rieter Management AG