From the Sector

Reset
185 results
(c) EREMA
Manfred Hackl, CEO EREMA Group and Markus Huber-Lindinger, Managing Director EREMA, open the EREMA Discovery Day 2023
09.06.2023

EREMA Discovery Day as meeting place for plastics and recycling industry

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

"This wide range of technologies is necessary because the recycling process each of our customers choose depends on the type of plastic, the level of contamination of the input material, and which product will be made using the recycled pellets. Following the expansion of our Ansfelden site and with the new site nearby in St. Marien, we can now demonstrate all these processes, carry out test runs with customers' material and focus on development work independently of our Customer Centre," says EREMA's Managing Director Markus Huber-Lindinger.

EREMA is driving forward research and development work in the company's new R&D Centre. Two halls with a total area of 1,550 square metres and a new office building offering space for 50 workplaces has been built. Here, the company bundles cross-departmental test machines and laboratory facilities for post consumer and inhouse recycling applications. R&D is decentralised at EREMA. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology - all with the aim of meeting customer requirements and achieving the highest possible quality of recycled pellets.  

On the evening before Discovery Day, EREMA celebrated its 40th anniversary together with customers and partners. A review covered the company's history - from the first workshop in a garage in 1983, to its position today as a innovation pioneer and one of the market leaders.

More information:
EREMA plastics Recycling
Source:

EREMA Group

07.06.2023

Mimaki at ITMA 2023

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Texcol® is a transfer paper pioneered by Dutch paper manufacturer, Coldenhove that allows for transferring a digital print using an environmentally friendly 3-step transfer process to create a vibrant application on a wide range of materials, including natural fibres. The design is initially printed onto the paper using a customised TS330-1600 - Mimaki’s high-volume, high-quality dye sublimation printer - and Mimaki’s new pigment inks developed for the process. The module that adapts the TS330-1600 will be available as an option for existing and new Mimaki customers in Q3 2023 but is being previewed on the Mimaki stand at ITMA.

Mimaki’s new Textile Pigment Ink is undergoing bluesign certification before commercial availability. bluesign is a renowned certification programme that ensures the highest levels of safety, environmental friendliness, and sustainability within the textile and apparel industry.

As the final stage, the Texcol® paper undergoes a one-step waterless process, through an entry-level calendar machine onto the textile of choice.

Cyclical textile technology
Mimaki is also debuting its new, unique Neo-Chromato Process, which revolutionises the reuse of coloured polyester textiles.

By decolourising polyester textiles that have been dyed using dye sublimation technologies, this innovative process allows materials to be re-printed or dyed immediately, contributing to a smaller circular economy. There is no limit to how many times reused polyester can be treated with the Neo-Chromato Process and the process itself minimises water usage and pollution by enabling the disposal of the absorbent paper and decolouring solvents used in the process as burnable waste.

Source:

Mimaki Europe B.V.

Photo: BTMA by AWOL Media
Pictured at the new installation (left to right) are Jayessh S Nanavati of Sainite Exports, JR Mehta of Candour Techtex, Barry Goodwin, and Sanjay Jain, Amba's coating technologist in India
02.06.2023

Amba Projex supports growth for India’s Candour Techtex

Candour Techtex, a Melegaon JR Group company, is satisfied with the latest coating and lamination line supplied by UK’s Amba Projex and has ordered a second, wider one to meet increasing demand.

Based in High Peak near Manchester, BTMA member Amba Projex has over 40 years’ experience in the design and manufacture of special purpose technical textile machines, with coating and laminating installations around the world.

Amba will be working closely with Candour over the next five years, to establish an Indian technical textiles powerhouse capitalising on the UK technology provider’s long experience in the field.

Formerly Chandni Textiles Engineering Industries, Candour Techtex of the Malegaon JR Group assumed its new name in 2022 to reflect its focus on a wide range of technical textiles at its new plant in Malegaon in the Nashik District of Maharashtra.

Candour Techtex, a Melegaon JR Group company, is satisfied with the latest coating and lamination line supplied by UK’s Amba Projex and has ordered a second, wider one to meet increasing demand.

Based in High Peak near Manchester, BTMA member Amba Projex has over 40 years’ experience in the design and manufacture of special purpose technical textile machines, with coating and laminating installations around the world.

Amba will be working closely with Candour over the next five years, to establish an Indian technical textiles powerhouse capitalising on the UK technology provider’s long experience in the field.

Formerly Chandni Textiles Engineering Industries, Candour Techtex of the Malegaon JR Group assumed its new name in 2022 to reflect its focus on a wide range of technical textiles at its new plant in Malegaon in the Nashik District of Maharashtra.

The company was founded in 1986 and at its existing plant in Ankleshwar, Gujarat, produces an annual 1.2 million metres of light velvet fabrics mainly for the domestic market for apparel and light home furnishings. In 2020 it also began operations at a plastic moulded components division in Gonde, Nashik, with a capacity of 4,500 tons per annum.

Blackout fabrics
In particular, the new Amba Projex system enables blackout fabrics to be produced efficiently and at scale.

Blackout fabrics are installed in rooms where complete light shielding is required, such as in public institutions like hospitals, and retirement homes, in hotels and conference rooms, and also in the home, especially in bedrooms.

They obtain their light impermeability by a special three-layer blackout coating which works on textiles of all colours. Only the middle layer of the three coatings needs to be black for obtaining the necessary light absorption. The fabrics are usually also treated for permanent flame-retardancy, and also with water or stain-repellent finishes. In addition to locking out light and providing maximum privacy, blackout curtains also help to insulate a home and reduce energy costs, in addition to protecting furniture and carpets from fading due to sunlight exposure.

(c) VeriVide
31.05.2023

BTMA: VeriVide’s new UltraView booth

At ITMA 2023 in Milan from June 8-14, BTMA member VeriVide will introduce UltraView – its first all-LED light booth for achieving a new level of consistent and standardised colour assessment.

The company’s light booths and lighting cabinets are specified by major global retailers around the world, who rely on them for establishing and maintaining visual quality standards across their supply chains.

This is no easy feat, given the textile industry’s complex structure and the many process stages each individual garment undertakes from the designer’s desk to the finished garment on the retail shelf – often criss-crossing several continents during the journey.

Benefits
UltraView brings a range of sustainable new benefits to designers, mills and brands, and combined with VeriVide’s successful DigiEye system for non-contact colour measurement and digital imaging, can have a positive impact on a company’s bottom line, bringing savings in time, money and CO2 emissions.

At ITMA 2023 in Milan from June 8-14, BTMA member VeriVide will introduce UltraView – its first all-LED light booth for achieving a new level of consistent and standardised colour assessment.

The company’s light booths and lighting cabinets are specified by major global retailers around the world, who rely on them for establishing and maintaining visual quality standards across their supply chains.

This is no easy feat, given the textile industry’s complex structure and the many process stages each individual garment undertakes from the designer’s desk to the finished garment on the retail shelf – often criss-crossing several continents during the journey.

Benefits
UltraView brings a range of sustainable new benefits to designers, mills and brands, and combined with VeriVide’s successful DigiEye system for non-contact colour measurement and digital imaging, can have a positive impact on a company’s bottom line, bringing savings in time, money and CO2 emissions.

The new all-LED light booth meets all relevant international lighting and colour assessment standards. The UltraView incorporates the company’s A rated CIE D65 and CIE D50 artificial daylight light sources and includes multiple pre-set point of sale light sources while being fully tuneable for recalibration to the individual requirements of each customer. In the past, individual light booths have had to be dedicated to the stipulated settings of each specific customer’s switch sets. The rapid flexibility of UltraView, however, makes the need for multiple light booths a thing of the past.

It also eliminates the need for the regular bulb changes that were necessary with fluorescents, to provide significant energy savings.

As supply chains continue to move towards digitisation away from time-consuming and expensive physical sampling, a version of the UltraView, VisionView, is available with an internal monitor to enable physical samples to be compared with their digital versions, if required.

DigiEye
For non-contact colour measurement and digital imaging, VeriVide’s DigiEye collects and processes data that can be communicated and shared instantly, enabling manufacturers, producers and processors to speed up quality control, sustain product integrity and reduce waste.

DigiEye also overcomes the limitations of spectrophotometers, which are limited to products with a solid colour appearance and can only measure ‘average’ colour, assessing the limited area of the product exposed in the instrument’s aperture.

These limitations are further compounded if the product has any form of multi-coloured characteristics or appearance, an uneven or inconsistent surface, a colour area too small to be captured by the instrument or any sort of surface effect, such as carpet pile and the sheen of satin and silk.

(c) SHIMA SEIKI MFG., LTD.
24.05.2023

SHIMA SEIKI at ITMA 2023

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will be participating in the International Textile Machinery Association exhibition (ITMA 2023) in Milan, Italy this June.

The Next-Generation group of machines is represented by the letter ‘R,’ first used in the SWG-XR WHOLEGARMENT® knitting machine launched last year in time for SHIMA SEIKI's 60th Anniversary event. The SWG-XR name is based on the original SWG-X four-needlebed WHOLEGARMENT® knitting machine which debuted at the Milan ITMA in 1995. As ITMA returns to Milan, SWG-XR refers to its origin as a pioneering invention that launched a new genre of seam-free knits produced in one entire piece. At the same time it represents a renewal of SHIMA SEIKI's commitment to its customers, the industry and the environment, as all aspects of the machine were re-evaluated in terms of its purpose, the way it is manufactured, how it is used and how it impacts the environment. The same renewal has been applied to the rest of the company's product lineup, and it is this renewal that becomes the core of SHIMA SEIKI's exhibition concept for ITMA 2023: "Reborn."

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will be participating in the International Textile Machinery Association exhibition (ITMA 2023) in Milan, Italy this June.

The Next-Generation group of machines is represented by the letter ‘R,’ first used in the SWG-XR WHOLEGARMENT® knitting machine launched last year in time for SHIMA SEIKI's 60th Anniversary event. The SWG-XR name is based on the original SWG-X four-needlebed WHOLEGARMENT® knitting machine which debuted at the Milan ITMA in 1995. As ITMA returns to Milan, SWG-XR refers to its origin as a pioneering invention that launched a new genre of seam-free knits produced in one entire piece. At the same time it represents a renewal of SHIMA SEIKI's commitment to its customers, the industry and the environment, as all aspects of the machine were re-evaluated in terms of its purpose, the way it is manufactured, how it is used and how it impacts the environment. The same renewal has been applied to the rest of the company's product lineup, and it is this renewal that becomes the core of SHIMA SEIKI's exhibition concept for ITMA 2023: "Reborn."

Of the 9 knitting machines SHIMA SEIKI is exhibiting, 8 machines will be part of the Next-Generation lineup, ranging from WHOLEGARMENT® knitting machines and computerized flat knitting machines to glove knitting machines. More than 300 items will be on display as proposals for knitted applications in various fields ranging from fashion, sports, shoes, bags and accessories to medical, safety, automotive, aeronautical and other wearable and industrial textile applications.

In addition to machine technology, SHIMA SEIKI's SDS-ONE APEX series computer graphic design system and software will be shown with their latest software upgrades that feature significant improvements in knit programming, 3D functions and speed. Demonstrations will be available for a comprehensive fashion tech solutions package based on realistic virtual sampling and supported by various digital solutions and web services.

More information:
Shima Seiki ITMA 2023 ITMA
Source:

SHIMA SEIKI MFG., LTD.

(c) ACIMIT
22.05.2023

Italian Textile Machinery: Drop in orders for 2023 first quarter

The textile machinery orders index for the first quarter of 2023, as processed by the Economics Office of ACIMIT, the Association of Italian Textile Machinery Manufacturers, declined markedly compared to January-March 2022 (-35%). In absolute terms, the index stood at 84.8 points (basis: 2015=100).

This result is mainly due to a reduction in the orders intake recorded by manufacturers on foreign markets. Indeed, foreign orders dropped by 40%, whereas the domestic market showed a 14% increase. The absolute value of the index settled at 78.3 points abroad, while it measured in at 148.1 points in Italy. During this year’s first quarter, booked orders stood at 4.2 months of guaranteed production.

ACIMIT president Alessandro Zucchi stated that, “The order index for the first quarter confirm a trend of the past few quarters, where uncertainty still predominates in global markets, both in terms of a macroeconomic framework that is characterized by a penalizing inflationary trend and ongoing geopolitical tensions. This is a scenario that this does not facilitate investment plans for businesses.”

The textile machinery orders index for the first quarter of 2023, as processed by the Economics Office of ACIMIT, the Association of Italian Textile Machinery Manufacturers, declined markedly compared to January-March 2022 (-35%). In absolute terms, the index stood at 84.8 points (basis: 2015=100).

This result is mainly due to a reduction in the orders intake recorded by manufacturers on foreign markets. Indeed, foreign orders dropped by 40%, whereas the domestic market showed a 14% increase. The absolute value of the index settled at 78.3 points abroad, while it measured in at 148.1 points in Italy. During this year’s first quarter, booked orders stood at 4.2 months of guaranteed production.

ACIMIT president Alessandro Zucchi stated that, “The order index for the first quarter confirm a trend of the past few quarters, where uncertainty still predominates in global markets, both in terms of a macroeconomic framework that is characterized by a penalizing inflationary trend and ongoing geopolitical tensions. This is a scenario that this does not facilitate investment plans for businesses.”

However, this uncertainty does not appear to affect the sector’s operators, who are nonetheless permeated by a sense of optimism, as is also testified by the positive data drawn from a comparison with orders from the previous quarter (October-December 2022), for which total orders had been slightly on the rise at +3%. Indeed, the president of ACIMIT confirms that, “Manufacturers in our sector don’t lack for work, having filled up on orders last year and are now busy fulfilling them. The forecasts for 2023 remain positive”. Zucchi concluded, “I expect this confirmation of a healthy manufacturing sector to come from ITMA Milan, the world’s premier trade show dedicated to textile and clothing technologies, slated to open on June 8th at the Rho Fiera exhibition spaces. The exhibit will feature over 400 Italian manufacturers, taking up approximately 30% of the entire exhibition space. This figure is in itself a result that confirms the leadership role of Italy’s textile machinery manufacturers”.

(c) FET
FET’s Director of Technology, Mark Smith and new R&D Manager, Dr Jonny Hunter
17.05.2023

FET strengthens its technical team

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has strengthened its technical team with the appointment of Dr Jonny Hunter as Research & Development Manager. Hunter brings a wealth of academic credentials to the department, including a Master’s in Medicinal and Biological Chemistry and a PhD in Sustainable Chemistry. This academic background is complemented by over 10 years’ R&D experience in industry, including FMCG and, in particular, medical devices, which encompasses wound care, the medical device manufacturing process and regulatory environment.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has strengthened its technical team with the appointment of Dr Jonny Hunter as Research & Development Manager. Hunter brings a wealth of academic credentials to the department, including a Master’s in Medicinal and Biological Chemistry and a PhD in Sustainable Chemistry. This academic background is complemented by over 10 years’ R&D experience in industry, including FMCG and, in particular, medical devices, which encompasses wound care, the medical device manufacturing process and regulatory environment.

FET designs, develops and manufactures extrusion equipment for a wide range of high value textile material applications, so the above research and industrial sectors have great relevance to the company’s focus on the international stage. A significant market for FET’s meltspinning equipment is medical devices, so in-house expertise in this area is a vital commodity. FET is also at the forefront of innovation to promote and develop sustainable fibres, so technical knowhow in sustainability is also essential. In this, Jonny Hunter has considerable experience and has in the past lead a number of innovation projects in sustainable chemistry and management.

This fresh input of knowledge and experience will benefit FET’s customers in their own drive for sustainable innovation in fibre technology. Mark Smith, the previous R&D Manager, is taking a short sabbatical and will be returning in a more strategic role as FET’s Director of Technology, so his continued presence will further contribute to FET’s breadth of technical expertise.

FET has also expanded in a number of other departments to reflect the rapid growth in sales over recent years. Mike Urey is the new Sales Engineer, bringing a wide industrial experience and strengthening all aspects of business development. Three new mechanical and electronic engineers and a new appointment in the design department all combine to take the company forward and sustain growth.

Source:

Fibre Extrusion Technology Ltd (FET)

16.05.2023

DiloGroup cooperates with Dell’Orco & Villani and TechnoPlants

With regard to current and imminent requirements to strengthen and promote the recycling of garment waste in order to safe valuable textile fibre in the European but also worldwide textile economy DiloGroup announces the start of a close cooperation between Dilo, Germany and the Italian companies Dell’Orco & Villani and TechnoPlants. This cooperation forms a group of expertise to supply complete projects in the area of textile recycling.

Dell’Orco & Villani is a long term highly experienced and innovative specialist in the field of tearing equipment to recycle textile garment clippings. This technology maintains as much as possible the staple length of reopened fibre from yarn in knitted and woven textiles. This special tearing process avoids the downgrading and shortening of the staple.

TechnoPlants is a highly experienced specialist in the field of aerodynamic web forming and through air technology with particular emphasis on reclaimed fibre for various applications as for example in acoustic and thermal insulation, car parts, upholstery and bedding.

With regard to current and imminent requirements to strengthen and promote the recycling of garment waste in order to safe valuable textile fibre in the European but also worldwide textile economy DiloGroup announces the start of a close cooperation between Dilo, Germany and the Italian companies Dell’Orco & Villani and TechnoPlants. This cooperation forms a group of expertise to supply complete projects in the area of textile recycling.

Dell’Orco & Villani is a long term highly experienced and innovative specialist in the field of tearing equipment to recycle textile garment clippings. This technology maintains as much as possible the staple length of reopened fibre from yarn in knitted and woven textiles. This special tearing process avoids the downgrading and shortening of the staple.

TechnoPlants is a highly experienced specialist in the field of aerodynamic web forming and through air technology with particular emphasis on reclaimed fibre for various applications as for example in acoustic and thermal insulation, car parts, upholstery and bedding.

DiloGroup with DiloSystems GmbH is a general contractor who is specialized in the area of fibre preparation, carding, cross-lapping and needling who will act as a turnkey general provider of complete projects including Dell’Orco & Villani components to reclaim wasted fibre as well as TechnoPlants components when aerodynamic web forming is included or when carding, cross-lapping is selected together with through-air ovens and end-of-line equipment including packaging from TechnoPlants.

The expertise of the three companies together is a source for the complete know-how in this large area of applications to reuse fibre from textile waste in new nonwoven material.

With the beginning of upcoming ITMA 23, more details of the organizational structure of this cooperation among the three companies will be released and project engineering will be started.

More information:
Dilo DiloGroup textile recycling
Source:

Oskar Dilo Maschinenfabrik KG

(c) FET
FET Melt Spinning system
05.05.2023

FET exhibits at ITMA 2023

Fibre Extrusion Technology Ltd (FET) of Leeds, UK will be exhibiting at ITMA 2023, taking place between 8-14 June Milan, Italy. FET has commissioned its biggest ever stand to reflect the company’s commitment to this event and the textile industry.

FET designs, develops and manufactures extrusion equipment for a wide range of high value textile material applications worldwide. Central to FET’s success has always been its ability to provide customers with advanced facilities and equipment, together with unrivalled knowledge and expertise in research and production techniques.

The new FET Fibre Development Centre will further improve this service, allowing clients to trial their own products in an ideal environment. Resident equipment in the Fibre Development Centre reflects the wide range of fibre extrusion systems offered by FET to clients worldwide and will enable continued growth of the company through innovation.  

Fibre Extrusion Technology Ltd (FET) of Leeds, UK will be exhibiting at ITMA 2023, taking place between 8-14 June Milan, Italy. FET has commissioned its biggest ever stand to reflect the company’s commitment to this event and the textile industry.

FET designs, develops and manufactures extrusion equipment for a wide range of high value textile material applications worldwide. Central to FET’s success has always been its ability to provide customers with advanced facilities and equipment, together with unrivalled knowledge and expertise in research and production techniques.

The new FET Fibre Development Centre will further improve this service, allowing clients to trial their own products in an ideal environment. Resident equipment in the Fibre Development Centre reflects the wide range of fibre extrusion systems offered by FET to clients worldwide and will enable continued growth of the company through innovation.  

For the first time at ITMA, the new FET Spunbond range will feature. This system provides opportunities for the scaled development of new nonwoven fabrics based on a wide range of fibres and polymers, including bicomponents. Recent customers to benefit from FET spunbond systems include the University of Leeds and an integrated metlblown / spunbond system at the University of Erlangen-Nuremberg in Germany.

FET’s established expertise remains in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. FET has successfully processed almost 30 different polymer types in multifilament, monofilament and non-woven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

A major theme at ITMA will again be sustainability. The FET range of laboratory and pilot extrusion lines is ideally suited for both process and end product development of sustainable materials. “This year we are celebrating FET’s 25th anniversary” says FET Managing Director Richard Slack “and we look forward to meeting customers at ITMA, where we can discuss their fibre technology needs.”

Source:

Fibre Extrusion Technology Ltd

28.04.2023

ANDRITZ: Outlook for the full year 2023

International technology group ANDRITZ has started the 2023 business year with unchanged high growth dynamics despite a slowing global economy. Revenue and operating result both increased significantly by well over 20 percent in the first quarter of 2023 compared with the same period of the previous year. Net income improved by almost 50 percent to 104.5 million euros (MEUR). Order intake reached a favorable level of 2.4 billion euros but was 6.5 percent below the figure for the first quarter of 2022, when the booking of two large-scale orders had provided a peak.

The key financial figures developed as follows during the reporting period:

International technology group ANDRITZ has started the 2023 business year with unchanged high growth dynamics despite a slowing global economy. Revenue and operating result both increased significantly by well over 20 percent in the first quarter of 2023 compared with the same period of the previous year. Net income improved by almost 50 percent to 104.5 million euros (MEUR). Order intake reached a favorable level of 2.4 billion euros but was 6.5 percent below the figure for the first quarter of 2022, when the booking of two large-scale orders had provided a peak.

The key financial figures developed as follows during the reporting period:

  • Order intake amounted to 2,420.2 MEUR and was thus 6.5% below the high level of the previous year’s reference period (Q1 2022: 2,588.6 MEUR), which included two large-scale orders. The Metals business area was able to increase its order intake significantly compared to the previous year’s reference period.
  • The order backlog as of March 31, 2023 amounted to 10,407.8 MEUR and has thus increased compared to 2022 (December 31, 2022: 9,976.5 MEUR).
  • Revenue at 1,962.6 MEUR was 28.5% higher than the reference figure for the previous year’s reference period (Q1 2022: 1,526.9 MEUR). All four business areas were able to significantly increase their revenue compared to the previous year.
  • The operating result (EBITA) increased in line with revenue, reaching a very favorable level at 158.5 MEUR in the first quarter of 2023 (+29.6% versus Q1 2022: 122.3 MEUR). The Group’s profitability (EBITA margin) increased slightly to 8.1% (Q1 2022: 8.0%).
  • Net income (without non-controlling interests) increased significantly to 104.5 MEUR (Q1 2022: 71.5 MEUR).

Following the successful first quarter, ANDRITZ confirms its previously published outlook for the full year 2023. Both revenue and earnings for the full year are expected to be above the level of 2022.

More information:
Andritz financial year 2023
Source:

ANDRITZ AG

Photo: ANDRITZ
26.04.2023

ANDRITZ: High-speed hygiene converting lines to Predo, Türkiye

International technology group ANDRITZ has received an order from Predo Health Products Inc, Türkiye, for delivery of two high-speed hygiene converting lines to produce adult open diapers and feminine sanitary napkins. With this investment, Predo is entering the growing adult and femcare market. The company already operates four baby diaper lines from ANDRITZ.

The two state-of-the-art lines are designed for high-speed production and contain the most advanced forming technology for absorbent core and SAP (superabsorbent polymers) dosing. Based on their flexibility and user-friendly configuration, Predo will be able to produce a wide range of different product compositions and sizes. In addition, the lines are designed for zero waste production. This will enable Predo to produce high-performing products with a sustainable approach.

The lines will be installed in Predo’s factory in Gaziantep, with start-up scheduled for the first half of 2024.

Predo is one of the leading manufacturers of baby care products and is expanding its business to other hygiene sectors. The company exports to 55 countries across the globe.

International technology group ANDRITZ has received an order from Predo Health Products Inc, Türkiye, for delivery of two high-speed hygiene converting lines to produce adult open diapers and feminine sanitary napkins. With this investment, Predo is entering the growing adult and femcare market. The company already operates four baby diaper lines from ANDRITZ.

The two state-of-the-art lines are designed for high-speed production and contain the most advanced forming technology for absorbent core and SAP (superabsorbent polymers) dosing. Based on their flexibility and user-friendly configuration, Predo will be able to produce a wide range of different product compositions and sizes. In addition, the lines are designed for zero waste production. This will enable Predo to produce high-performing products with a sustainable approach.

The lines will be installed in Predo’s factory in Gaziantep, with start-up scheduled for the first half of 2024.

Predo is one of the leading manufacturers of baby care products and is expanding its business to other hygiene sectors. The company exports to 55 countries across the globe.

More information:
Andritz Predo Turkey Hygiene polymers
Source:

ANDRITZ AG

(c) Zünd Systemtechnik AG
06.04.2023

ITMA 2023: Zünd presents digital single- ply cutting

At ITMA 2023 in Milan, Zünd is focusing on the advantages of digital single-ply cutting in modern garment production.

At the show, Zünd will demonstrate the advantages of individual cutting on demand and what benefits single-ply cutting of textiles offers. In the course of digitalization, the market environment of the apparel industry has changed. Producers are responding to increasing digitalization and ever-shorter product life cycles by investing in lean and highly automated production workflows. Solutions from Zünd supported process streamlining from ordering to cutting while minimizing manual interventions.

At ITMA 2023 in Milan, Zünd is focusing on the advantages of digital single-ply cutting in modern garment production.

At the show, Zünd will demonstrate the advantages of individual cutting on demand and what benefits single-ply cutting of textiles offers. In the course of digitalization, the market environment of the apparel industry has changed. Producers are responding to increasing digitalization and ever-shorter product life cycles by investing in lean and highly automated production workflows. Solutions from Zünd supported process streamlining from ordering to cutting while minimizing manual interventions.

Zünd's single-ply cutters are the cutting tools in digitized production, offering manufacturers flexibility and profitability. Intelligent automation functions, optical solutions and software tools facilitate resource optimization, keep an eye on material consumption and support employees who can turn their attention to value-adding activities. With digital single-layer cutting, manufacturers speed up their cutting and expand their production capacities at the same time. They can accept orders at very short notice and easily meet delivery times thanks to highly economical and efficiently scalable on-demand production. Peaks in demand can be easily managed.

Zünd cutters give users new flexibility in their production workflow. He can work with complex motifs, demanding textiles and different shapes. The cutting technology enables the apparel industry to produce highly individualized customized garments in small batches and on demand just as economically and efficiently as in high volumes. It can process and handle more orders in less time. At the same time, both material and time are saved. In combination with the MindCut production software and precise single-layer cutting, there is almost no waste. The cut parts can be nested very close to each other and close to the material edges. This not only offers considerable savings potential, but also helps to reduce the ecological footprint.

Source:

Zünd Systemtechnik AG

(c) SHIMA SEIKI MFG., LTD.
Yarnbank
05.04.2023

SHIMA SEIKI at SPINEXPO 40th Session Shanghai

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HONG KONG) LTD., will participate in the 40th Session of SPINEXPO in Shanghai, China from 12th - 14th April 2023.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HONG KONG) LTD., will participate in the 40th Session of SPINEXPO in Shanghai, China from 12th - 14th April 2023.

At SPINEXPO, SHIMA SEIKI will offer visitors a choice between its "SDS®-ONE APEX4" apparel design system and its "APEXFiz®" subscription-based design software. Whereas SDS®-ONE APEX4 is offered as an all-in-one proprietary hardware + software package, APEXFiz® is subscription-based design software that can be installed on customers' individual computers. Both SDS®-ONE APEX4 and APEXFiz® software support the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. When a design is approved for production, knitting data is automatically generated for converting to machine data, allowing smooth communication for digitally bridging the gap between studio and factory. APEXFiz® thereby helps to realize sustainability while digitally transforming the fashion supply chain.

Also on display at SPINEXPO will be SHIMA SEIKI's "yarnbank®," an online web service for searching and viewing the latest yarns, developed with cooperation from yarn companies from around the world. Registered users can download yarn data for free, for use in fabric simulation and virtual sampling on APEXFiz®, avoiding the need to scan yarn on their own. By using yarn that is used in actual production, designers and apparel companies can furthermore rest assured that the simulations created using yarn from yarnbank® are not merely realistic images but accurate representations using yarn that can actually be purchased and used in production. With yarnbank®, the entire supply chain from yarn companies and apparel companies to knit manufacturers can be connected digitally.

SHIMA SEIKI will also display the latest collection of its knit samples, including WHOLEGARMENT® knitwear that is knit in its entirety on the machine without the need for linking or sewing afterward. Together with virtual sampling performed on APEXFiz®, WHOLEGARMENT® offers smart production for realizing a sustainable fashion supply chain.

Source:

SHIMA SEIKI MFG., LTD.

(c) BTMA
22.03.2023

BTMA welcomes digital dyeing and finishing company Alchemie

Alchemie Technology is the latest company to join the British Textile Machinery Association (BTMA), as all of the organisation’s members gear up to showcase an array of new innovations at ITMA 2023 in Milan from June 8-14 this year.

Cambridge-headquartered Alchemie is the inventor of two technologies – EndeavourTM and NovaraTM.

The Endeavour digital dyeing system produces no wastewater and reduces water consumption by up to 95% compared to traditional dyeing. The virtually waterless process delivers dyed fabric with high colour consistency and colour fastness and does not require post dyeing washing steps which leads to an energy reduction up to 85%. It can deliver any colour shade required and enables on-demand digital colour changeovers in any run length, from a few metres to several kilometres.

Alchemie Technology is the latest company to join the British Textile Machinery Association (BTMA), as all of the organisation’s members gear up to showcase an array of new innovations at ITMA 2023 in Milan from June 8-14 this year.

Cambridge-headquartered Alchemie is the inventor of two technologies – EndeavourTM and NovaraTM.

The Endeavour digital dyeing system produces no wastewater and reduces water consumption by up to 95% compared to traditional dyeing. The virtually waterless process delivers dyed fabric with high colour consistency and colour fastness and does not require post dyeing washing steps which leads to an energy reduction up to 85%. It can deliver any colour shade required and enables on-demand digital colour changeovers in any run length, from a few metres to several kilometres.

Similar energy savings can be achieved with the Novara precision finishing system which utilises a nozzle array to deliver finishing chemistry with millimetre resolution. Finishing chemistries penetrate deeply into the fabric due to the combination of high velocity liquid jetting and precisely-controlled vacuum and textile finishes are applied only where needed, reducing chemistry usage and enabling multi-functionality.

In the past year, Alchemie, backed by Swedish fashion giant H&M, has established a first demonstration hub at customer JSRTEX in Taiwan. It is now progressing plans to set up further centres at customer sites around the world.

Source:

BTMA / AWOL Media

13.03.2023

ITMF-Webinar series on “Digital Workflow" and the “Circular Textile Economy"

ITMF has invited some of the start-ups that have presented at the ITMF Annual Conference 2023 to share in more depth during a series of interactive webinars their digital platforms/tools and how companies can benefit from digital workflows. The first webinar with the start-up “ColorDigital” took place in the first half of February. The second webinar will take place in March with the start-up “Frontier.Cool”.

In cooperation with the “Institut für Textiltechnik” (Institute for Textile Technology) of RWTH Aachen University, ITMF has developed a series of webinars that will have a closer look at the concept, political and legal environment as well as technology regarding circularity and recycling in the textile industry. In six webinars of 60-75 minutes each, international experts will discuss the backgrounds and potential of circularity in the textile industry. The webinar series start in March and will be completed by the end of May 2023.

The webinars are free of charge for ITMF members and all their affiliated members.  

Please check the Textination schedule for all details.

ITMF has invited some of the start-ups that have presented at the ITMF Annual Conference 2023 to share in more depth during a series of interactive webinars their digital platforms/tools and how companies can benefit from digital workflows. The first webinar with the start-up “ColorDigital” took place in the first half of February. The second webinar will take place in March with the start-up “Frontier.Cool”.

In cooperation with the “Institut für Textiltechnik” (Institute for Textile Technology) of RWTH Aachen University, ITMF has developed a series of webinars that will have a closer look at the concept, political and legal environment as well as technology regarding circularity and recycling in the textile industry. In six webinars of 60-75 minutes each, international experts will discuss the backgrounds and potential of circularity in the textile industry. The webinar series start in March and will be completed by the end of May 2023.

The webinars are free of charge for ITMF members and all their affiliated members.  

Please check the Textination schedule for all details.

Source:

Institut für Textiltechnik (ITA) of RWTH Aachen University

 

09.03.2023

Rieter AG closes financial year 2022 with record sales

  • Sales of CHF 1 510.9 million,
  • Order intake of CHF 1 157.3 million in 2022; order backlog of around CHF 1 540 million as of December 31, 2022
  • EBIT margin of 2.1%
  • Implementation of action plan to increase profitability ongoing
  • Dividend of CHF 1.50 per share proposed

With record sales of CHF 1 510.9 million, Rieter achieved an increase of 56% compared with the previous year (2021: CHF 969.2 million). In the second half of 2022, especially in the fourth quarter, the measures introduced to address material bottlenecks had a positive impact. Consequently, sales increased to CHF 890.3 million compared with the first six months (first half-year 2022: CHF 620.6 million).

  • Sales of CHF 1 510.9 million,
  • Order intake of CHF 1 157.3 million in 2022; order backlog of around CHF 1 540 million as of December 31, 2022
  • EBIT margin of 2.1%
  • Implementation of action plan to increase profitability ongoing
  • Dividend of CHF 1.50 per share proposed

With record sales of CHF 1 510.9 million, Rieter achieved an increase of 56% compared with the previous year (2021: CHF 969.2 million). In the second half of 2022, especially in the fourth quarter, the measures introduced to address material bottlenecks had a positive impact. Consequently, sales increased to CHF 890.3 million compared with the first six months (first half-year 2022: CHF 620.6 million).

Order intake was CHF 1 157.3 million in 2022 (2021: CHF 2 225.7 million) and thus remained at a high level thanks to the company’s technological lead and broad international presence. The market situation, especially in the second half of 2022, was characterized by investment restraint and below-average capacity utilization at spinning mills due to geopolitical uncertainties, rising financing costs, and consumer reticence in important markets.
The company had an order backlog of around CHF 1 540 million at the end of 2022, which thus extends into 2023 and 2024.

The profit at the EBIT level in the 2022 financial year was CHF 32.2 million (2021: CHF 47.6 million). The result was strongly influenced by substantial cost increases, which could only be offset in part through price increases or other remedial measures. In addition, to compensate for material shortages, expenses were incurred in connection with the development of alternative solutions, and in relation to the acquired businesses.

Completion of the Acquisition
Rieter consolidated the acquired automatic winding machine business with effect from April 1, 2022. This acquisition completes Rieter’s system offering in the largest market segment of ring and compact spinning, thus significantly strengthening the company’s market position.

Action Plan to Increase Profitability
Implementation of the action plan to increase profitability is ongoing. With regard to the margins for the order backlog, which remains high, the already implemented price increases in combination with a positive trend in costs, particularly in logistics, are having a favorable impact. In addition, progress was made in eliminating material bottlenecks and reducing expenses for the three acquired businesses.

Dividend
The Board of Directors proposes to the shareholders the distribution of a dividend of CHF 1.50 per share for 2022. This corresponds to a payout ratio of 56%.

Outlook
For the coming months, Rieter expects below-average demand for new equipment at first, with a revival expected in the second half of 2023 after ITMA, the leading trade fair in Milan (Italy). Rieter also believes that demand for consumables, wear & tear and spare parts will recover during 2023.
For the 2023 financial year, due to the high order backlog, Rieter anticipates sales in the order of magnitude of the previous year.
The realization of sales from the order backlog continues to be associated with risks in connection with the ongoing geopolitical uncertainties, rising financing costs, continuing bottlenecks in the supply chains, and possible, currently unforeseeable consequences of the earthquake in Türkiye in February 2023. Despite the price increases already implemented, further global cost increases continue to pose a risk to the growth of profitability. Rieter will specify the outlook in the 2023 semi-annual report.

Source:

Rieter Holding AG

(c) Shima Seiki
02.03.2023

SHIMA SEIKI at FIMEC 2023

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA., will participate in the FIMEC 2023 46th International Fair of Leather, Chemicals, Components, Machinery and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil next month.

Working off the recent trend in knitted shoe uppers in the athletic footwear market, SHIMA SEIKI proposes knitted fabrics to the general footwear market as an alternative to leather. To that end SHIMA SEIKI will be showcasing the latest applications of computerized flat knitting technology to demonstrate its contributions in this field.

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA., will participate in the FIMEC 2023 46th International Fair of Leather, Chemicals, Components, Machinery and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil next month.

Working off the recent trend in knitted shoe uppers in the athletic footwear market, SHIMA SEIKI proposes knitted fabrics to the general footwear market as an alternative to leather. To that end SHIMA SEIKI will be showcasing the latest applications of computerized flat knitting technology to demonstrate its contributions in this field.

As pioneer of WHOLEGARMENT® knitting technology whereby the knitted product can be produced in one entire piece on the machine without linking or sewing, the company is showing the MACH2XS WHOLEGARMENT® knitting machine for the first time at FIMEC. MACH2XS features 4 needle beds and SHIMA SEIKI's original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® products in all needles. Proposals include WHOLEGARMENT® sportswear as well as seam-free shoe uppers. For conventional shaped knitting of shoe uppers, the SVR123SP machine features a loop presser bed that permits inlay technique for producing hybrid fabrics with both knit and weave characteristics, suited to shoe upper applications that require form-fitting function, comfort, flexibility, breathability as well as strength and stiffness. SVR123SP furthermore features i-Plating inverse-plating capability for increased patterning capability, including the production of jacquard-like patterns in light-weight plain jersey stitch. Also on show will be the compact SVR093 machine with a short knitting width intended for knitting shoe uppers. Both SVR machines feature such SHIMA SEIKI innovations as DSCS® Digital Stitch Control System, spring-type moveable sinker system, stitch presser, yarn gripper and cutter, and takedown comb. Made-in-Japan quality, reliability, productivity, user-friendliness and cost-performance all combine to satisfy the high expectations of the world's shoe industry.

SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design and simulation suited to shoe production. Of particular interest is its ultra-realistic simulation capability that realizes Virtual Sampling. When countless variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time and cost normally associated with producing actual samples for each variation. The sustainability factor is also undeniable.

Source:

Shima Seiki

02.03.2023

VDMA: Way2ITMA

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

Dirk Vantyghem introduced the core issues of the EU textile strategy launched in 2022, which is the most ambitious plan ever, to push the textile sector towards sustainability and transparency, and promote a new circular business model. If wrongly designed, that new framework may collapse the European textile value chain. But if done rightly, the changes ahead could bring a paradigm shift in the sector, where competitiveness is no longer based on price only, but also on sustainability and innovation, explained Vantyghem.

Francis Elias Junker showed high level of expertise for mechanical textile recycling for both spinning and nonwovens industries that Andritz has. The company has a diversity of solutions to offer and several cooperation partners, covering the value chain from recovery of fiber to the chemical modification and preparation for the production of yarn.

Tanja Karila gave an overview of how Infinited Fiber is turning textile waste into new fibers. Patented technology turns post-consumer textile waste into brand new premium quality fibers for the textile industry. The textile-to-textile recycling technology captures the value in waste that would otherwise be landfilled or burned.

More information:
ITMA 2023 Sustainability Webinar
Source:

VDMA e. V.
Textile Machinery

22.02.2023

Italian Textile Machinery Manufacturers at INDEX 2023

INDEX, a leading nonwovens exhibition, will take place in Geneva. About 90 Italian exhibitors will be present at this edition, including over 40 machinery manufacturers. As in past editions, ITA – Italian Trade Agengy, in cooperation with ACIMIT, the Association of Italian Textile Machinery Manufacturers, has organized an exhibition space reserved for companies manufacturing machinery for the sector. There will be 12 exhibiting companies in the Italian pavilion. Of these, the ACIMIT members are: Bematic, Bombi, Bonino, Dell’Orco & Villani, Ferraro, Loptex, Ommi, Rf Systems, Texera, Zappa Macchine. Other ACIMIT member companies will exhibit fair with their own booths.

The nonwovens sector has grown significantly in recent years. According to EDANA, the association grouping European companies operating in the sector, after the impressive growth in the previous year, the production volume of nonwovens grew by 2% in 2021, exceeding 3 million tonnes.

INDEX, a leading nonwovens exhibition, will take place in Geneva. About 90 Italian exhibitors will be present at this edition, including over 40 machinery manufacturers. As in past editions, ITA – Italian Trade Agengy, in cooperation with ACIMIT, the Association of Italian Textile Machinery Manufacturers, has organized an exhibition space reserved for companies manufacturing machinery for the sector. There will be 12 exhibiting companies in the Italian pavilion. Of these, the ACIMIT members are: Bematic, Bombi, Bonino, Dell’Orco & Villani, Ferraro, Loptex, Ommi, Rf Systems, Texera, Zappa Macchine. Other ACIMIT member companies will exhibit fair with their own booths.

The nonwovens sector has grown significantly in recent years. According to EDANA, the association grouping European companies operating in the sector, after the impressive growth in the previous year, the production volume of nonwovens grew by 2% in 2021, exceeding 3 million tonnes.

“The growth in nonwovens production has also driven the demand of machinery for nonwovens, comments Alessandro Zucchi, president of ACIMIT. The Italian technological supply has consequently expanded. At the 2023 INDEX edition, the presence of a significant number of Italian machinery manufacturers testifies their desire to play a leading role also in the production of machinery for nonwovens”.

The trend of Italian exports testifies the strong increase in production of nonwovens machinery. Indeed in 2021 Italian sales abroad reached a value of 102 million euro (+77% over the previous year) and in the first nine months of 2022, the value of Italian exports stood at 92 million euro.

Source:

Acimit

09.02.2023

Italian textile machinery: declining orders for fourth quarter 2022

The fourth quarter 2022 textile machinery orders index, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, showed a sharp 35% decline compared to the period from October to December 2021. In absolute value, the index stood at 83.6 points (basis: 2015=100).

Orders took a 34% drop on the domestic market, while the foreign index was down fully 37%. In Italy, the index’s absolute value came in at 155.4 points, whereas on foreign markets the value stood at 75.8 points.

On annual basis, the orders index marked an 18% decrease and an absolute value of 110.4 points. The drop in orders abroad was 17%, while orders collected in Italy were 28% lower than the figures drawn up in 2021.

The fourth quarter 2022 textile machinery orders index, processed by ACIMIT, the Association of Italian Textile Machinery Manufacturers, showed a sharp 35% decline compared to the period from October to December 2021. In absolute value, the index stood at 83.6 points (basis: 2015=100).

Orders took a 34% drop on the domestic market, while the foreign index was down fully 37%. In Italy, the index’s absolute value came in at 155.4 points, whereas on foreign markets the value stood at 75.8 points.

On annual basis, the orders index marked an 18% decrease and an absolute value of 110.4 points. The drop in orders abroad was 17%, while orders collected in Italy were 28% lower than the figures drawn up in 2021.

ACIMIT president Alessandro Zucchi stated that, “The orders index data for the fourth quarter confirms what had already been observed in the previous quarters in 2022. After a sharp increase in 2021, this decrease in orders for the past year is physiological. Furthermore, the ongoing war between Russia and Ukraine, with its related consequences on daily business and trade, and a macroeconomic framework in which uncertainty prevails, have further negatively affected the orders intake.”

Data for the last quarter does not suggest a reverse in the negative trend for the first months of 2023. Declining energy prices and inflation, although still high, also declining slightly are, however, signs of a light improvement in the business of companies in the sector as well. “We need to look to the current year with optimism,” continued ACIMIT president. “Our member companies are already focusing on ITMA, the upcoming global textile machinery industry trade fair, that will be held from June 8-14 in Milan.” “I am confident that ITMA Milan can represent an opportunity for further development of the Italian textile machinery sector,” concluded Zucchi. “The technological innovations that our manufacturers will bring to the trade show will meet the textile industry’s need to be increasingly sustainable, both environmentally and economically.”

More information:
ACIMIT
Source:

ACIMIT