From the Sector

Reset
27 results
Foto: ANDRITZ
Novafiber CEO and Head of Production together with ANDRITZ technicians and project manager in front of the newly installed 6-cylinder EXEL line
05.04.2023

Novafiber starts up textile recycling and airlay lines from ANDRITZ

International technology group ANDRITZ has delivered, installed, and commissioned a mechanical textile recycling line and an airlay line at Novafiber’s nonwovens production mill in Palín, Guatemala. Both lines have been successfully operating since December 2022.

The recycling line – the second tearing line ANDRITZ supplied to Novafiber – processes post-industrial textile waste from Central America. The recycled fibers feed the latest ANDRITZ Flexiloft airlay line, which produces nonwoven end-products for the bedding and furniture industries – a true example of a circular textile-to-nonwoven approach. The production process ensures complete material use as a state-of-the-art edge trim recycling system returns any waste directly to the tearing and/or airlay line.

This combination of ANDRITZ tearing and airlay lines allows Novafiber to process large amounts of post-industrial garments, controlling the supply chain from raw material to final product. In addition, it enables energy savings and a reduced carbon footprint due to the reduction of shipments.

International technology group ANDRITZ has delivered, installed, and commissioned a mechanical textile recycling line and an airlay line at Novafiber’s nonwovens production mill in Palín, Guatemala. Both lines have been successfully operating since December 2022.

The recycling line – the second tearing line ANDRITZ supplied to Novafiber – processes post-industrial textile waste from Central America. The recycled fibers feed the latest ANDRITZ Flexiloft airlay line, which produces nonwoven end-products for the bedding and furniture industries – a true example of a circular textile-to-nonwoven approach. The production process ensures complete material use as a state-of-the-art edge trim recycling system returns any waste directly to the tearing and/or airlay line.

This combination of ANDRITZ tearing and airlay lines allows Novafiber to process large amounts of post-industrial garments, controlling the supply chain from raw material to final product. In addition, it enables energy savings and a reduced carbon footprint due to the reduction of shipments.

Based in Palín, Novafiber is a leading company in Guatemala for producing nonwovens from post-industrial textile waste for both the local market and export.

Source:

ANDRITZ AG

02.11.2022

Nico Reiner as new Chief Financial Officer of Lenzing AG

The Supervisory Board of Lenzing AG, a world-leading provider of sustainably produced specialty fibers for the textile and nonwoven industries, has appointed Nico Reiner as its new Chief Financial Officer. Mr. Reiner will join Lenzing’s Managing Board led by Chief Executive Officer Stephan Sielaff on January 1, 2023. He will succeed Chief Financial Officer Thomas Obendrauf, who is leaving the company of his own volition after seven years.

Nico Reiner has held several positions in his professional career to date, including CFO at globally operating companies such as Schüco Group, AL-KO Group and Pfleiderer Group, as well as management consultant roles. His most recent appointment was as CFO of Vacuumschmelze GmbH & Co. KG, a global player with headquarters in Hanau that specializes in the development, production and marketing of magnetic materials.

The Supervisory Board of Lenzing AG, a world-leading provider of sustainably produced specialty fibers for the textile and nonwoven industries, has appointed Nico Reiner as its new Chief Financial Officer. Mr. Reiner will join Lenzing’s Managing Board led by Chief Executive Officer Stephan Sielaff on January 1, 2023. He will succeed Chief Financial Officer Thomas Obendrauf, who is leaving the company of his own volition after seven years.

Nico Reiner has held several positions in his professional career to date, including CFO at globally operating companies such as Schüco Group, AL-KO Group and Pfleiderer Group, as well as management consultant roles. His most recent appointment was as CFO of Vacuumschmelze GmbH & Co. KG, a global player with headquarters in Hanau that specializes in the development, production and marketing of magnetic materials.

Source:

Lenzing AG

Photo: EREMA
21.10.2022

EREMA: Circular economy for PET fibres

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

"With EREMA's VACUREMA® and INTAREMA® technology and PURE LOOP's ISEC evo technology, our company group already has an extensive range of machines for fibre and PET recycling applications. For ecologically and economically sound recycling, however, new technological solutions are needed to use the recycled fibres in higher-value end applications and to achieve a functioning circular economy," explains Wolfgang Hermann, Business Development Manager Application Fibres & Textiles, EREMA Group GmbH. The initial focus will be on PET, regarded as a key material for the production of synthetic fibres. The aim is to find recycling solutions that allow PET fibre materials to be prepared for reuse in PET fibre production processes. This is a significant step for the circular economy because PET fibres in textiles account for about two-thirds of the total volume of PET.

In this development work, the EREMA Group can build on existing know-how. Proven recycling technologies have been combined with a new IV optimiser. "This extends the residence time of the PET melt, which is particularly necessary in fibre recycling to efficiently remove spinning oils. Our recycling process also increases the IV value of the PET melt after extrusion back to the specific level that is essential for production of the fibre," explains Hermann. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

Fibre test centre with plant to test customers' materials
In order to accelerate development work, EREMA opened its own fibre test centre a few months ago, where a cross-company team is working on recycling solutions for fibre-to-fibre applications.

Source:

EREMA Gruppe

19.05.2022

DOMO Chemicals stellt seine neue Marke NYLEO® vor

  • DOMOs neue NYLEO®-Marke vereint DOMOs Erfahrung mit Nylon 66-basierten Fasern und legt mit drei neuen Produkten den Schwerpunkt auf Innovation
  • NYLEO® PROTECT steht für verbesserten Flammschutz, NYLEO® 4EARTH® ist der Name für verbesserte biologische Abbaubarkeit und NYLEO® SAFE zeichnet sich durch bakteriostatische Eigenschaften aus
  • NYLEO® repräsentiert einen neuen Meilenstein in DOMOs wachsendem Angebot an nachhaltigen Lösungen

NYLEO® ist DOMOs neue Produktlinie und kombiniert bewährte Hochleistungsfasern mit bahnbrechenden neuen Lösungen. NYLEO® auf Nylon 66-Basis wird in zahlreichen Anwendungen eingesetzt, darunter Textilien, Bodenbeläge sowie Flock- und Schleifmittel. Aufgrund seiner Eigenschaften bietet NYLEO® ein breites Spektrum an Möglichkeiten für die Verbesserung der Produktleistung.

  • DOMOs neue NYLEO®-Marke vereint DOMOs Erfahrung mit Nylon 66-basierten Fasern und legt mit drei neuen Produkten den Schwerpunkt auf Innovation
  • NYLEO® PROTECT steht für verbesserten Flammschutz, NYLEO® 4EARTH® ist der Name für verbesserte biologische Abbaubarkeit und NYLEO® SAFE zeichnet sich durch bakteriostatische Eigenschaften aus
  • NYLEO® repräsentiert einen neuen Meilenstein in DOMOs wachsendem Angebot an nachhaltigen Lösungen

NYLEO® ist DOMOs neue Produktlinie und kombiniert bewährte Hochleistungsfasern mit bahnbrechenden neuen Lösungen. NYLEO® auf Nylon 66-Basis wird in zahlreichen Anwendungen eingesetzt, darunter Textilien, Bodenbeläge sowie Flock- und Schleifmittel. Aufgrund seiner Eigenschaften bietet NYLEO® ein breites Spektrum an Möglichkeiten für die Verbesserung der Produktleistung.

DOMOs NYLEO® setzt auf unsere Erfahrungen mit Nylon 66-basierten Fasern und legt mit drei Produkten den Schwerpunkt auf Innovation: NYLEO® PROTECT mit verbessertem Flammschutz, NYLEO® 4EARTH® mit verbesserter biologischer Abbaubarkeit und NYLEO® SAFE mit bakteriostatischen Eigenschaften.

DOMOs Erbe an innovativen Nylon 66-Fasern
DOMOs Team für Hochleistungsfasern hat seinen Sitz im französischen Valence. DOMO produziert seit 1955 PA66-Fasern für Anwendungsbereiche wie Schleifmittelvliese, Luftfahrt, Teppichböden, Hochleistungstextilien, Flock für Polstermöbel, Innenausstattung und -böden von Autos sowie viele weitere Verbraucherprodukte. Die NYLEO® Marke wird nun auf das gesamte Portfolio an Polyamid 66 (PA 66)-Faserprodukten, einschließlich gekräuseltem TOW oder TOW für die Flockherstellung, angewendet. Fasern auf Basis von PA66 sind für hohe Widerstandsfähigkeit, hervorragende Verschleiß- und Abriebfestigkeit, hohe Zähigkeit, ausgezeichnete Färbbarkeit und Farbechtheit sowie einheitliche Qualität und weiche Haptik bekannt. Dazu gehören:

  • NYLEO® PROTECT – um das Sicherheitsniveau in den Bereichen persönliche Schutzausrüstung, Bekleidung, Möbel und Transport zu erhöhen, hat DOMO eine neue flammhemmende PA 66-Faser entwickelt. NYLEO® PROTECT vereint alle Vorteile von PA 66, wie z. B. mechanische Eigenschaften, Komfort, geringes spezifisches Gewicht und hervorragende Abriebfestigkeit, mit verbessertem Flammschutz. Der Sauerstoffindex (LOI) von NYLEO® PROTECT wurde auf 28 % verbessert, was dem Niveau typischer flammhemmender Fasern entspricht.
  • NYLEO® 4EARTH® – immer mehr Hersteller befassen sich mit den Themen Nachhaltigkeit und Kreislaufwirtschaft und versuchen ihren Einfluss auf die Umwelt weitmöglichst zu verringern, z. B. durch ein besseres Abfallmanagement. Die textile Wertschöpfungskette hat starken Anteil an den Mülldeponien, auf denen die meisten Kleidungsstücke enden. Aus diesem Grund entwickelte DOMO mit NYLEO® 4EARTH® eine Faser, die auf Deponien besser biologisch abgebaut wird. Während traditionelle Nylon 66-Fasern 50 – 100 Jahre für den Zerfall benötigten, braucht NYLEO® 4EARTH aufgrund seiner verbesserten biologischen Abbaubarkeit nur fünf Jahre, um abgebaut zu werde.
  • NYLEO® SAFE – die Verbreitung von Bakterien hat sich zu einem immer dringlicheren Gesundheitsproblem entwickelt. Bei NYLEO® SAFE wird ein bakteriostatisches Mittel in die Polymermatrix eingebracht, wo es die Fasern langfristig schützt und das Wachstum von Bakterien verhindert.
Source:

DOMO Chemicals / Marketing Solutions NV

03.05.2022

DOMO: Mechanische Struktursimulation für PA6-GF-Werkstoffe

  • Das MMI (Materialmodellierung, mechanische Berechnung und Spritzgusssimulation)-Team für fortgeschrittene Simulationstechnologien bietet erheblich verbesserten Service für PA6-GF-Werkstoffe
  • Integrative Simulationsumgebung lässt sich effektiv mit der Digimat-Software anwenden und gewährleistet präzise und robuste Finite-Elemente-Analysen

DOMOs fortschrittliche Simulationsumgebung MMI für PA66-Bauteile gilt auf dem Markt bereits als Referenz für präzise Simulationen. Ab sofort unterstützt dieses Simulationstool OEMs und Bauteillieferanten bei der Entwicklung von leistungsfähigen, leichten und kosteneffizienten Bauteilen aus PA6. Mit dem DOMO Service Hub können Bauteilentwickler ihre Polyamidlösungen somit schneller in Serie bringen.

Bei glasfaserverstärkten Materialien muss die Ausrichtung der Glasfasern berücksichtigt werden, die während des Spritzgussverfahrens entsteht. Dabei ermöglicht die Digimat-Software eine genaue integrative Simulation. DOMO besitzt ein umfangreiches Fachwissen bei der integrativen Simulation der TECHNYL® A-Serie von PA66-GF-Materialien und ist daher in der Lage, präzise Bauteilsimulationen durchzuführen.

  • Das MMI (Materialmodellierung, mechanische Berechnung und Spritzgusssimulation)-Team für fortgeschrittene Simulationstechnologien bietet erheblich verbesserten Service für PA6-GF-Werkstoffe
  • Integrative Simulationsumgebung lässt sich effektiv mit der Digimat-Software anwenden und gewährleistet präzise und robuste Finite-Elemente-Analysen

DOMOs fortschrittliche Simulationsumgebung MMI für PA66-Bauteile gilt auf dem Markt bereits als Referenz für präzise Simulationen. Ab sofort unterstützt dieses Simulationstool OEMs und Bauteillieferanten bei der Entwicklung von leistungsfähigen, leichten und kosteneffizienten Bauteilen aus PA6. Mit dem DOMO Service Hub können Bauteilentwickler ihre Polyamidlösungen somit schneller in Serie bringen.

Bei glasfaserverstärkten Materialien muss die Ausrichtung der Glasfasern berücksichtigt werden, die während des Spritzgussverfahrens entsteht. Dabei ermöglicht die Digimat-Software eine genaue integrative Simulation. DOMO besitzt ein umfangreiches Fachwissen bei der integrativen Simulation der TECHNYL® A-Serie von PA66-GF-Materialien und ist daher in der Lage, präzise Bauteilsimulationen durchzuführen.

Die neuen MMI-PA6-GF Materialkarten können für eine Vielzahl von Glasfaserkonzentrationen und -temperaturen sowie für elastische und elastoplastische Materialmodelle mit Versagensindikatoren eingesetzt werden. Diese sind in der Digimat Software verfügbar und führen zu den gleichen präzisen Ergebnissen wie bei den TECHNYL® A PA66-Werkstoffen. Die neuen Materialkarten heben somit die PA6-Datenbank auf das gleiche Leistungsniveau wie PA66 an. Im nächsten Schritt werden in die Digimat-Datenbank auch crashspezifische und thermische Modelle eingepflegt.

„Dank der präzisen MMI-Simulation können TECHNYL® Bauteile entwickelt werden, die leichter, leistungsfähiger und kosteneffizienter sind“, erklärt Gilles Robert, Material Expert bei DOMO. „Unsere Kunden profitieren von kürzeren Entwicklungszeiten und haben eine bessere Kontrolle über die internen Kosten. Der kontinuierliche Aufbau der TECHNYL®-Materialdatenbank erweitert das Anwendungsfeld dieser Simulationsumgebung auf PA6 Bauteile.“

Source:

DOMO Chemicals / Marketing Solutions NV

03.03.2022

Lenzing opens lyocell plant in Thailand

  • Project delivered on schedule and at budget after two and a half years of construction despite challenges arising from a global pandemic
  • New state-of-the-art lyocell plant with a capacity of 100,000 tons will help serve the growing demand for sustainably produced fibers
  • Important milestone towards a carbon-free future has been set

The Lenzing Group is pleased to announce the completion of its key lyocell expansion project in Thailand. The new plant, one of the largest of its kind in the world with a nameplate capacity of 100,000 tons per year, started production on schedule and will help to even better meet the increasing customer demand for TENCEL™ branded lyocell fibers. For Lenzing, the project also represents an important step towards strengthening its leadership position in the specialty fiber market and into a carbon-free future.

  • Project delivered on schedule and at budget after two and a half years of construction despite challenges arising from a global pandemic
  • New state-of-the-art lyocell plant with a capacity of 100,000 tons will help serve the growing demand for sustainably produced fibers
  • Important milestone towards a carbon-free future has been set

The Lenzing Group is pleased to announce the completion of its key lyocell expansion project in Thailand. The new plant, one of the largest of its kind in the world with a nameplate capacity of 100,000 tons per year, started production on schedule and will help to even better meet the increasing customer demand for TENCEL™ branded lyocell fibers. For Lenzing, the project also represents an important step towards strengthening its leadership position in the specialty fiber market and into a carbon-free future.

The construction of the plant located at Industrial Park 304 in Prachinburi, around 150 kilometers northeast of Bangkok, started in the second half of 2019 and proceeded largely according to plan, despite the challenges arising from the COVID-19 pandemic. The recruiting and onboarding of new employees has been successful. Investments (CAPEX) amounted to approx. EUR 400 mn.

“The demand for our wood-based, biodegradable specialty fibers under the TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ brands is growing very well. In Asia in particular, we see huge growth potential for our brands based on sustainable innovation. With the production start of the lyocell plant in Thailand, Lenzing reached an important milestone in its growth journey, supporting our ambitious goal to make the textile and nonwoven industries more sustainable”, said Robert van de Kerkhof, Member of the Managing Board.

In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions per ton of product by 50 percent by 2030. The target is to be climate-neutral by 2050. Due to the established infrastructure, the site in Thailand can be supplied with sustainable biogenic energy and contribute significantly to climate protection.

Together with the key project in Brazil and the substantial investments at the existing sites in Asia, Lenzing is currently implementing the largest investment program in its corporate history (with more than approx. EUR 1.5 bn). Lenzing will continue to drive the execution of its strategic projects, which are to make a significant contri-bution to earnings from 2022.

Source:

Lenzing AG

(c) Composites Germany
Composites Index: current general business situation
04.02.2022

Composites Germany: Results of the 18th Composites Market Survey

  • Assessment of current business situation positive
  • Future expectations subdued
  • Investment climate friendly
  • Varied expectations for application industries
  • GRP is still a growth driver
  • Composites Index is now positive

This is the 18th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK, Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.
As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future market developments.

You can read more about it in the attached document.

  • Assessment of current business situation positive
  • Future expectations subdued
  • Investment climate friendly
  • Varied expectations for application industries
  • GRP is still a growth driver
  • Composites Index is now positive

This is the 18th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK, Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.
As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future market developments.

You can read more about it in the attached document.

Source:

Composites Germany / AVK-TV GmbH

03.02.2022

Lenzing’s new prize for research projects on ethical and sustainable fashion

The Lenzing Group will present the Young Scientist Award for outstanding research in the field of fibers and textiles for the first time in 2022. The Dornbirn Global Fiber Congress (GFC Dornbirn) is an ideal platform for the recently launched research competition. Bachelor’s and master’s degree students will have the opportunity to submit their scientific work in the categories of fashion and the circular economy, textile recycling and the innovative use of biobased fibers to a jury of well-known industry experts.

The jury consists of Karla Magruder (Founder of Acceleration Circularity), Friedericke von Wedel-Parlow (Beneficial Design Institute Berlin) and Dieter Eichinger (Head of Standardization and Innovation, Secretary-General of BISFA). The winning project will receive a prize of EUR 5,000. The aim is to promote the students’ work and create a platform for networking with the textile and fiber industry.

The Lenzing Group will present the Young Scientist Award for outstanding research in the field of fibers and textiles for the first time in 2022. The Dornbirn Global Fiber Congress (GFC Dornbirn) is an ideal platform for the recently launched research competition. Bachelor’s and master’s degree students will have the opportunity to submit their scientific work in the categories of fashion and the circular economy, textile recycling and the innovative use of biobased fibers to a jury of well-known industry experts.

The jury consists of Karla Magruder (Founder of Acceleration Circularity), Friedericke von Wedel-Parlow (Beneficial Design Institute Berlin) and Dieter Eichinger (Head of Standardization and Innovation, Secretary-General of BISFA). The winning project will receive a prize of EUR 5,000. The aim is to promote the students’ work and create a platform for networking with the textile and fiber industry.

The Austrian Fibers Institute is the organizer of the 61st Dornbirn Global Fiber Congress on a not-for-profit basis. The event, due to take place from September 14 to 16, 2022, will offer an ideal setting for the presentation of the Young Scientist Award prize.

You can read more about the Young Scientist Award and the submission in the attached document.

(c) Sappi Europe
27.01.2022

Sappi: Expanded production options for Fusion Topliner

Sappi, a leading provider of sustainable woodfibre-based packaging materials, is expanding production of its successful Fusion Topliner grade to its flagship mill in Gratkorn, Austria. The Fusion Topliner – a white virgin fibre liner for high-quality corrugated packaging – will also continue to be manufactured at Sappi’s Ehingen mill in Germany. With this project, Sappi isn’t just expanding its production capacity in the corrugated board business. By offering the same product quality from both mills, Sappi is bringing production closer to its customers – to guarantee a sustainable and short supply chain in the heart of Europe.

Sappi, a leading provider of sustainable woodfibre-based packaging materials, is expanding production of its successful Fusion Topliner grade to its flagship mill in Gratkorn, Austria. The Fusion Topliner – a white virgin fibre liner for high-quality corrugated packaging – will also continue to be manufactured at Sappi’s Ehingen mill in Germany. With this project, Sappi isn’t just expanding its production capacity in the corrugated board business. By offering the same product quality from both mills, Sappi is bringing production closer to its customers – to guarantee a sustainable and short supply chain in the heart of Europe.

  • Sappi’s Fusion Topliner virgin fibre liner strengthens brand image and impact, and demand continues to grow
  • Capacities are now being expanded through significant investment at Gratkorn mill, Austria
  • Volumes will be enlarged in the next months to ensure reliable customer supply

Just a decade ago, there were only two options on the market for coated white corrugated liners: either kraft liner made from high-quality raw materials and with a very low recycled content, or test liner, which consists almost exclusively of recycled paper. As an alternative, Sappi developed its Fusion Topliner, now the most widely used corrugated liner made from pure virgin fibre. It is recommended for applications such as premium quality consumer goods packaging and POS displays – where high visual impact and differentiation are key. The product also stands out with exceptional strength and versatility.

Sappi’s Fusion Topliner has been successful on the market for many years. Demand for the product has continued to grow, due to its exceptional characteristics for print quality and finishing. Production is now being expanded from the German mill in Ehingen to include Sappi’s flagship mill in Gratkorn. The available capacities are now being expanded to include the production of Fusion Topliner in addition to existing graphic papers. Volume availability will be increased month by month to support the expected growth of our customers, and to satisfy large requirements in the corrugated board business.

Source:

Sappi Europe / Ruess Group

Photo: ANDRITZ
24.01.2022

ANDRITZ to supply a spunlace line to Texygen Textile

International technology group ANDRITZ has received an order from the Uzbek cotton spinning specialist Texygen Textile LLC to supply a complete neXline spunlace line. Start-up is scheduled for the first quarter of 2023.

This will be the first spunlace line ever installed in Uzbekistan. The equipment will process high-quality cotton fibers in a fully integrated production line, from bleaching to winding. With this new line, Texygen Textile LLC will be able to produce top-class spunlace wipes made of 100% cotton, thus opening up new market opportunities.

The ANDRITZ equipment will minimize fiber loss and enable Texygen to produce a high-end spunlace fabric that will allow the company to serve the international medical industry with spunlace wipes.

Established in 2010, Texygen is a frontrunner in the Uzbekistan textile industry, especially in cotton spinning. The company has its headquarters in Tashkent, Uzbekistan.

International technology group ANDRITZ has received an order from the Uzbek cotton spinning specialist Texygen Textile LLC to supply a complete neXline spunlace line. Start-up is scheduled for the first quarter of 2023.

This will be the first spunlace line ever installed in Uzbekistan. The equipment will process high-quality cotton fibers in a fully integrated production line, from bleaching to winding. With this new line, Texygen Textile LLC will be able to produce top-class spunlace wipes made of 100% cotton, thus opening up new market opportunities.

The ANDRITZ equipment will minimize fiber loss and enable Texygen to produce a high-end spunlace fabric that will allow the company to serve the international medical industry with spunlace wipes.

Established in 2010, Texygen is a frontrunner in the Uzbekistan textile industry, especially in cotton spinning. The company has its headquarters in Tashkent, Uzbekistan.

More information:
Andritz spunlace line cotton Fibers
Source:

ANDRITZ AG

20.12.2021

Kelheim Fibres: Severe Impact of Natural Gas Price Increases

Over the past 14 days, the wholesale cost of natural gas in Germany has risen by more than 50%. This increase presents an extraordinary challenge for industry, and there is no sign of support or intervention from the Government. Indeed, recent statements are destined to provoke a worsening of the situation.

Kelheim Fibres is entirely dependent on natural gas for the generation of electrical energy and steam and has no viable short-term alternatives. In addition, the raw materials used by the company often consume high levels of energy in their production and are also increasing significantly in cost. These increases in cost jeopardise the future of the business if they cannot be passed on though the supply chain.

Kelheim Fibres is calling on the Government of Germany to take immediate steps to mitigate the impact of the cost increases for natural gas and is committed to work to implement alternative sources of energy in the medium term.

Over the past 14 days, the wholesale cost of natural gas in Germany has risen by more than 50%. This increase presents an extraordinary challenge for industry, and there is no sign of support or intervention from the Government. Indeed, recent statements are destined to provoke a worsening of the situation.

Kelheim Fibres is entirely dependent on natural gas for the generation of electrical energy and steam and has no viable short-term alternatives. In addition, the raw materials used by the company often consume high levels of energy in their production and are also increasing significantly in cost. These increases in cost jeopardise the future of the business if they cannot be passed on though the supply chain.

Kelheim Fibres is calling on the Government of Germany to take immediate steps to mitigate the impact of the cost increases for natural gas and is committed to work to implement alternative sources of energy in the medium term.

In parallel, the disruption to global logistic networks that has been seen throughout 2021 is now expected to continue throughout 2022. Massive increases in shipping rates – in some cases in excess of 80% – are being imposed without notice and with no opportunity for negotiation. These costs must also be passed on though the supply chain if businesses are to remain viable.

To address these issues, Kelheim Fibres is implementing the following measures with immediate effect:

  • The increased cost of energy and freight will be passed on in prices to customers at the soonest opportunity;
  • If necessary, changes or adjustments to existing agreements will be negotiated to reflect the increased cost levels;
  • If the necessary increase in fibre prices cannot be secured, cuts to production will be implemented with the objective of minimising losses until the cost increases can be mitigated.

As the drivers for the increases in natural gas prices appear to be temporary in nature, we will maintain any price adjustments under review and pass on any relief to customers.

Craig Barker, CEO of Kelheim Fibres, describes the current situation as critical. “The cost increases we are facing are unprecedented and call for swift and decisive action. We are determined to take the necessary steps to preserve the future of our business and provide security of supply for our customers. At the same time, we are relying on the support of our customers to help us conquer the challenges our business is facing.”

Source:

Kelheim Fibres GmbH

TU Dresden: Forscherteam der ITM mit biomimetisches Trommelfellimplantat für Otto von Guericke-Preis der AiF 2021 nominiert (c) AiF e.V.
Dipl.-Ing. Lukas Benecke, Dr.-Ing. Dilbar Aibibu, Prof. Dr. med. Marcus Neudert und Dr.-Ing. Zhaoyu Chen (v.l.n.r)
25.11.2021

TU Dresden: Forscherteam der ITM für Otto von Guericke-Preis der AiF 2021 nominiert

Das interdisziplinär aufgestellte Forscherteam von der TU Dresden, bestehend aus Dr.-Ing. Dilbar Aibibu und Dipl.-Ing. Lukas Benecke vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden sowie Prof. Dr. med. Marcus Neudert und Dr.-Ing. Zhaoyu Chen von der Klinik und Poliklinik für Hals-, Nasen- und Ohrenheilkunde (HNO) der Medizinischen Fakultät der TU Dresden, wurde für die Entwicklung eines biomimetischen Trommelfellimplantats, die maßgeblich in dem IGF-Forschungsvorhaben 20533 BR umgesetzt worden ist, für den diesjährigen Otto von Guericke-Preis der AiF nominiert.

Das interdisziplinär aufgestellte Forscherteam von der TU Dresden, bestehend aus Dr.-Ing. Dilbar Aibibu und Dipl.-Ing. Lukas Benecke vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden sowie Prof. Dr. med. Marcus Neudert und Dr.-Ing. Zhaoyu Chen von der Klinik und Poliklinik für Hals-, Nasen- und Ohrenheilkunde (HNO) der Medizinischen Fakultät der TU Dresden, wurde für die Entwicklung eines biomimetischen Trommelfellimplantats, die maßgeblich in dem IGF-Forschungsvorhaben 20533 BR umgesetzt worden ist, für den diesjährigen Otto von Guericke-Preis der AiF nominiert.

Prof. Chokri Cherif, Institutsdirektor des ITM freut sich mit seinem Team sehr über die kontinuierlichen interdisziplinären Forschungserfolge auf dem stetig wachsenden Forschungsfeld der faserbasierten Biomedizintechnik, die am ITM in enger Kooperation mit Medizinern und Anwendern stetig erzielt werden. „Bereits im letzten Jahr wurden wir mit der Entwicklung neuartiger textiler Herzklappenprothesen als eines der drei Finalistenteams des Otto von Guericke-Preises 2020 geehrt. Die Nominierung für diesen hochkarätigen Preis ist eine erneute Bestätigung für den Bedarf an unserer praxisorientierten Forschung und eine besondere Würdigung, aber gleichzeitig auch weiterer Ansporn.

Über 30 Millionen Menschen leiden jährlich an den Folgen eines defekten Trommelfells. Ohne fachmedizinische Behandlung kann dies zu dauerhaften Schäden und schwerem Hörverlust führen. Zur Rekonstruktion des Trommelfells, der sogenannten Myringoplastik, werden heute körpereigene Knorpelhaut, Faszie oder synthetische Materialien eingesetzt. Da deren Materialeigenschaften nicht denen des natürlichen Trommelfells entsprechen, ist eine vollständige Rehabilitation des Gehörs damit nicht möglich.

Wissenschaftlerinnen und Wissenschaftler vom ITM und HNO-Klinik der TU Dresden entwickelten im Rahmen des IGF-Vorhabens „Simulationsgestützte Entwicklung einer flexiblen Technologie zur Umsetzung biomimetischer, langzeitresorbierbarer funktionaler und stabiler Trommelfellimplantate MyringoSeal)“ ein biomimetisch aufgebautes künstliches Trommelfellimplantat, das die körpereigenen Schwingungseigenschaften exakt wiedergibt. Die neuartige Membran ermöglicht eine vollständige Wiederherstellung der Schwingungseigenschaften des Trommelfells. Die Herstellung solcher Implantate ist mithilfe der Elektrospinntechnologie aus den Biomaterialien Seidenfibroin und Polycaprolacton möglich.

Source:

TU Dresden - ITM

15.11.2021

Kelheim Fibres once again finishes high in Canopy's Hot Button Ranking

In the Canopy’s 2021 Hot Button Ranking, Kelheim Fibres once again occupies a leading position: With a increase of 2.5 points in the evaluation, the Bavarian viscose speciality fibre manufacturer tied for third place out of around 40 viscose fibre manufacturers worldwide and a dark green/green shirt for the second year running. The Hot Button Report not only stands for responsible raw material sourcing - it is an overall sustainability indicator for viscose fibre producers.

Especially in the areas of transparency and procurement, the NGO Canopy, which is committed to the preservation of ancient and endangered forests, awarded Kelheim Fibres top points: Kelheim Fibres is the only EMAS-certified viscose fibre manufacturer worldwide and publishes all environmentally relevant data publicly.

Kelheim Fibres also gained points in the area of "Next Generation Solutions" - the use of alternative raw materials in fibre production. Together with the Swedish textile recycling company Renewcell, the fibre experts are planning to realise the large-scale production of high-quality viscose fibres from up to 10,000 tonnes of the 100% textile recyclate Circulose® per year.

In the Canopy’s 2021 Hot Button Ranking, Kelheim Fibres once again occupies a leading position: With a increase of 2.5 points in the evaluation, the Bavarian viscose speciality fibre manufacturer tied for third place out of around 40 viscose fibre manufacturers worldwide and a dark green/green shirt for the second year running. The Hot Button Report not only stands for responsible raw material sourcing - it is an overall sustainability indicator for viscose fibre producers.

Especially in the areas of transparency and procurement, the NGO Canopy, which is committed to the preservation of ancient and endangered forests, awarded Kelheim Fibres top points: Kelheim Fibres is the only EMAS-certified viscose fibre manufacturer worldwide and publishes all environmentally relevant data publicly.

Kelheim Fibres also gained points in the area of "Next Generation Solutions" - the use of alternative raw materials in fibre production. Together with the Swedish textile recycling company Renewcell, the fibre experts are planning to realise the large-scale production of high-quality viscose fibres from up to 10,000 tonnes of the 100% textile recyclate Circulose® per year.

Source:

Kelheim Fibres GmbH

(c) HeiQ
HeiQ AeoniQ Zellulosegarn
26.10.2021

´Zellulosehaltige, klimafreundlichen HeiQ AeoniQ-Garns

HeiQ kündigt mit der Einführung von HeiQ AeoniQ - einem hochleistungsfähigen Zellulosegarn auf Basis einer neuen Faser aus kohlenstoffnegativen Materialien - einen potenziellen Wendepunkt für die Textilindustrie an. Diese neue Faser, die aus zellulosehaltigen Biopolymeren der dritten Generation gewonnen wird, befindet sich auf dem Weg zur Pilotproduktion, bevor sie in großem Umfang auf den Markt kommt. The LYCRA Company ist der erste Entwicklungspartner von HeiQ.

HeiQ AeoniQ-Zellulosegarn aus klimafreundlichen Rohstoffen
HeiQ AeoniQ-Garne (Aeon: Streben nach ewiger Zirkularität) werden aus zellulosehaltigen Biopolymeren hergestellt, die während des Wachstums Kohlenstoff aus der Atmosphäre binden und gleichzeitig Sauerstoff erzeugen. Dieses Hochleistungsgarn ist in der Lage, synthetische Filamentgarne zu ersetzen, die mehr als 60% der weltweiten jährlichen Textilproduktion von 108 Millionen Tonnen ausmachen.2 Im Vergleich zu herkömmlichen Zelluloseprodukten werden für die Herstellung von HeiQ AeoniQ-Garnen weder Ackerland noch Pestizide oder Düngemittel benötigt.

HeiQ kündigt mit der Einführung von HeiQ AeoniQ - einem hochleistungsfähigen Zellulosegarn auf Basis einer neuen Faser aus kohlenstoffnegativen Materialien - einen potenziellen Wendepunkt für die Textilindustrie an. Diese neue Faser, die aus zellulosehaltigen Biopolymeren der dritten Generation gewonnen wird, befindet sich auf dem Weg zur Pilotproduktion, bevor sie in großem Umfang auf den Markt kommt. The LYCRA Company ist der erste Entwicklungspartner von HeiQ.

HeiQ AeoniQ-Zellulosegarn aus klimafreundlichen Rohstoffen
HeiQ AeoniQ-Garne (Aeon: Streben nach ewiger Zirkularität) werden aus zellulosehaltigen Biopolymeren hergestellt, die während des Wachstums Kohlenstoff aus der Atmosphäre binden und gleichzeitig Sauerstoff erzeugen. Dieses Hochleistungsgarn ist in der Lage, synthetische Filamentgarne zu ersetzen, die mehr als 60% der weltweiten jährlichen Textilproduktion von 108 Millionen Tonnen ausmachen.2 Im Vergleich zu herkömmlichen Zelluloseprodukten werden für die Herstellung von HeiQ AeoniQ-Garnen weder Ackerland noch Pestizide oder Düngemittel benötigt.

HeiQ AeoniQ-Garne sind für den Kreislaufgedanken konzipiert und können bei gleichbleibender Faserqualität mehrfach recycelt werden. Der Herstellungsprozess soll 99% weniger Wasser verbrauchen als bei Baumwollgarnen, und HeiQ AeoniQ soll vergleichbare Leistungseigenschaften wie Polyester, Nylon und herkömmliche Garne aus regenerierter Zellulose bieten.

Einladung von Erstanwendern
Die führenden Branchenexperten von HeiQ stehen bereit, um im zweiten Quartal 2022 die ersten HeiQ AeoniQ-Garne aus der Pilotproduktionsanlage zu liefern. Angesichts der herausragenden Qualitäten, des einzigartigen Dekarbonisierungspotenzials und der hervorragenden ESG3-Eigenschaften lädt HeiQ maximal 20 auf Nachhaltigkeit ausgerichtete Markenpartner ein, als erste Produkte aus diesem zukunftsweisenden Garn auf den Markt zu bringen.

The LYCRA Company als primärer Entwicklungspartner
HeiQ gibt bekannt, dass The LYCRA Company mit ihrer Markenkollektion, ihrem globalen Einzelhandelskundennetzwerk und ihren Fähigkeiten zur Stoffinnovation ein primärer Partner für die Bekleidungsentwicklung für HeiQ AeoniQ-Garne mit einer Exklusivität für Stretch- und Leistungsstoffe sein wird. The LYCRA Company verfügt über ein komplettes Angebot an zertifizierten, nachhaltigen Produkten und ergänzt dieses Angebot kontinuierlich durch die Entwicklung neuer LYCRA®-Fasertypen. Diese Fasern haben das Potenzial, mit HeiQ AeoniQ-Garn kombiniert zu werden, um einzigartige dekarbonisierende und abbaubare elastische Stoffe zu schaffen.

 

2 Statista
3 Environment, Social, Governance

Source:

HeiQ Materials AG

22.10.2021

Rieter Investor Update 2021

  • Order intake of CHF 698.6 million in third quarter 2021
  • Order intake of CHF 1 673.9 million after nine months
  • Acquisition of the three Saurer businesses on schedule
  • Credit lines renewed early
  • Outlook 2021

The positive market dynamics, which Rieter has already reported on several occasions, continued in the third quarter of the current year. Rieter recorded an order intake of CHF 698.6 million in the third quarter of 2021 (2020: CHF 174.4 million).

  • Order intake of CHF 698.6 million in third quarter 2021
  • Order intake of CHF 1 673.9 million after nine months
  • Acquisition of the three Saurer businesses on schedule
  • Credit lines renewed early
  • Outlook 2021

The positive market dynamics, which Rieter has already reported on several occasions, continued in the third quarter of the current year. Rieter recorded an order intake of CHF 698.6 million in the third quarter of 2021 (2020: CHF 174.4 million).

The order intake of CHF 1 673.9 million after nine months corresponds to an increase of 294% compared to the prior year period (2020: CHF 425.1 million).
 
The market development is broadly supported at the global level and is based on a catch-up effect from 2019 and 2020 in combination with a regional shift in demand. Rieter believes that a major reason for this regional shift in demand is the development of costs in China. This is leading to increased investments outside the Chinese market. The orders came primarily from Turkey, Latin America, India, Pakistan and China. Overall, Rieter is benefitting from its innovative product range and the global positioning of the company.

The Business Group Machines & Systems achieved an order intake totaling CHF 1 281.6 million in the first nine months of 2021 (+447%).*

In the first nine months of 2021, the Business Group Components recorded an increase of 95% to CHF 227.0 million, while the Business Group After Sales posted an order intake of CHF 165.3 million, an increase of 123% compared to the prior year period.*

Acquisition of the three Saurer businesses on schedule
The acquisition of the three businesses from Saurer, which Rieter announced on August 16, 2021, is proceeding according to plan. The incoming orders for these businesses are not taken into account in this trading update.
 
Credit lines renewed early
The Rieter Group arranged the early renewal of the existing committed credit lines (five-year term, totaling CHF 250 million).
 
Outlook 2021*
The first nine months of 2021 were characterized by a rapid market recovery combined with a regional shift in demand. Rieter expects the demand for new systems to gradually return to normal in the coming months.  
 
For the full year 2021, Rieter anticipates sales of around CHF 900 million.

* See attached document for more information.

More information:
Rieter spinning Fibers yarn
Source:

Rieter Management AG

Zuse-Gemeinschaft: Biogene Schäume und Fasern für den Auto-Innenraum (c) Zuse-Gemeinschaft
08.10.2021

Zuse-Gemeinschaft: Biogene Schäume und Fasern für den Auto-Innenraum

Vom Biomasseanbau und der energetischen Nutzung über das Herstellen von Zwischenprodukten bis hin zum Verwenden biogener Ressourcen in langlebigen Verbraucherprodukten: die Bioökonomie umgibt uns schon heute tagtäglich. Doch welche Innovationen zeichnen sich ab, um die Wirkung biogener Ressourcen im Sinne des Klimaschutzes zu maximieren? Das war Thema beim Online-Werkstattgespräch Bioökonomie der Zuse-Gemeinschaft am 6. Oktober.

CO2 einsparen durch biogene Schäume und Fasern für den Auto-Innenraum
Wie textile Anwendungen aus der Bioökonomie verstärkt in einem Schlüsselbereich der Energiewende - der Mobilität - zum Zuge kommen können, berichtete Dr. Frank Meister, Abteilungsleiter Chemische Forschung beim Thüringischen Institut für Textil- und Kunststoff-Forschung (TITK) anhand des von der Europäischen Union geförderten Projekts BioMotive.

Vom Biomasseanbau und der energetischen Nutzung über das Herstellen von Zwischenprodukten bis hin zum Verwenden biogener Ressourcen in langlebigen Verbraucherprodukten: die Bioökonomie umgibt uns schon heute tagtäglich. Doch welche Innovationen zeichnen sich ab, um die Wirkung biogener Ressourcen im Sinne des Klimaschutzes zu maximieren? Das war Thema beim Online-Werkstattgespräch Bioökonomie der Zuse-Gemeinschaft am 6. Oktober.

CO2 einsparen durch biogene Schäume und Fasern für den Auto-Innenraum
Wie textile Anwendungen aus der Bioökonomie verstärkt in einem Schlüsselbereich der Energiewende - der Mobilität - zum Zuge kommen können, berichtete Dr. Frank Meister, Abteilungsleiter Chemische Forschung beim Thüringischen Institut für Textil- und Kunststoff-Forschung (TITK) anhand des von der Europäischen Union geförderten Projekts BioMotive.

Das TITK ist dort eingebunden in die Entwicklung biogener Fasern und neuer Leichtbauwerkstoffe für den Auto-Innenraum, wo sie z.B. für Sitze, Armaturenbrett oder Türinnenverkleidung gebraucht werden. Unter anderem entwickelten die Forschenden neue sogenannte Lyocellfasern aus modifizierten Papierzellstoffen. Der besondere Vorzug am TITK: An dem Thüringer Institut konnten die neu entwickelten Fasern in einer kleintechnischen Versuchsanlage im Maßstab von mehreren 100 kg hergestellt werden. Das erhöht die Vergleichbarkeit mit den Realitäten der Industrie und war Design-Basis für eine unlängst errichtete Demo-Anlage der Metsä-Tochter MI Demo im finnischen Äänekoski. „Lyocellfasern als biogener Werkstoff vermeiden Umweltbelastungen wie sie bei anderen Materialien durch die Risiken von Mikroplastik entstehen. Hinzu kommt als Klima-Plus: Durch die von uns mit entwickelten und bewerteten Fasern und Verfahrensprinzipien lässt sich der CO2-Fußabdruck bei der Produktion von Fahrzeugen spürbar verringern“, erklärt Meister.

Kombination von CO2-Elektrolyse und Biotech-Wertstoffsynthese
Dass mithilfe von Bioökonomie-Lösungen CO2 nicht nur eingespart werden kann, sondern auch negative Emissionen des Klimagases erreichbar sind, deutete Dr. Markus Stöckl vom DECHEMA-Forschungsinstitut (DFI) an. In seinem Vortrag „Mit Strom und CO2 zum Biokunststoff“ zeigte er auf, wie die Elektrolyse dazu genutzt werden kann, Erneuerbare Energien „lagerbar“ zu machen. Der Ansatz: Aus Kohlendioxyd so genanntes Formiat zu produzieren, das als Feststoff lagerbare Salz der Ameisensäure, das Mikroorganismen als Energie- und Kohlenstoffquelle dienen kann, die wiederum daraus den Biokunststoff Polyhydroxybutyrat (PHB) herstellen. Durch die elektrochemische Herstellung des Zwischenprodukts Formiat können unterschiedliche Mikroorganismen eingesetzt werden.

Source:

Zuse-Gemeinschaft

CU Bau: Klimaschonendes Sanieren und Bauen (c) IMA Dresden
Faserverbundwerkstoffe im Hochbau
07.10.2021

CU Bau: Klimaschonendes Sanieren und Bauen

Stark steigende Baustoffpreise, immer knapper werdende Rohstoffe sowie steigende Preise für CO2-Zertifkate und Strom erhöhen den Druck, klimafreundliche und doch wettbewerbsfähige Produkte zu verwenden und innovative Produkte, Verfahren und Prozesse dafür zu entwickeln.

Für diese Herausforderungen im Bauwesen bietet der Leichtbau mit Faserverbundwerkstoffen neue Lösungen und ein enormes Anwendungspotential. Bisher sind diese Werkstoffe im Bauwesen noch nicht in ausreichendem Umfang etabliert und bei vielen Entscheidern noch nicht Teil der Lösung. Deshalb treibt das Fachnetzwerk CU Bau des Composites United e.V. (CU) als nationale und internationale Plattform dieses Thema für seine Mitglieder aus Industrie und Wissenschaft voran.

Stark steigende Baustoffpreise, immer knapper werdende Rohstoffe sowie steigende Preise für CO2-Zertifkate und Strom erhöhen den Druck, klimafreundliche und doch wettbewerbsfähige Produkte zu verwenden und innovative Produkte, Verfahren und Prozesse dafür zu entwickeln.

Für diese Herausforderungen im Bauwesen bietet der Leichtbau mit Faserverbundwerkstoffen neue Lösungen und ein enormes Anwendungspotential. Bisher sind diese Werkstoffe im Bauwesen noch nicht in ausreichendem Umfang etabliert und bei vielen Entscheidern noch nicht Teil der Lösung. Deshalb treibt das Fachnetzwerk CU Bau des Composites United e.V. (CU) als nationale und internationale Plattform dieses Thema für seine Mitglieder aus Industrie und Wissenschaft voran.

Hybride Bauweisen
Roy Thyroff, im Netzwerk Composites United e.V. Geschäftsführer CU Bau: „Unser Ziel ist, dass die gesamte Bauwirtschaft – Architekten, Planer, Bauingenieure, Zulassungsstellen sowie Bauunternehmen – Bauprodukte mit faserverstärkter Beton- und Polymermatrix mit entsprechenden Zulassungen einsetzen kann.“ Dabei geht es nicht nur um Bauweisen mit faserverstärkten Kunststoffen und textilbewehrtem Beton, sondern darüber hinaus auch um hybride Bauweisen, wie z.B. Hybridbauwerke aus Holz und Carbonbeton. Denn faserbasierter, hybrider Leichtbau führt die besten Eigenschaften verschiedener Materialien klimafreundlich zusammen, bietet somit gegenüber herkömmlichen Baustoffen große Vorteile für den Klimaschutz und ermöglicht völlig neue Bauweisen.

Vorteile von Faserverbundwerkstoffen
Faserverbundwerkstoffe sind sowohl im Neubau als auch in der Sanierung dank ihrer umwelt- und ressourcenschonenden Eigenschaften im Vorteil. Neben der CO2-Reduktion liegen die wesentlichen Vorteil:

  • in der Geschwindigkeit der Ausführung,
  • dem geringeren Materialeinsatz,
  • der Kostenreduktion,
  • der Leistungsfähigkeit wie hoher Druck- und Biegezugfestigkeit,
  • dem einfacheren Handling
  • den geringeren Transportlasten,
  • der Beständigkeit gegen Korrosion,
  • der Flexibilität bei unterschiedlichen Schädigungsgraden eines Sanierungsfalls und
  • der deutlich verlängerten Nutzungsdauer.
Source:

Composites United e.V. (CU) / bm CONSULTING

Fraunhofer UMSICHT: Bionische Mikroplastikfilter in Waschmaschinen (c) Jan Hagenmeyer/Uni Bonn
06.10.2021

Fraunhofer UMSICHT: Bionische Mikroplastikfilter in Waschmaschinen

In der Waschmaschine wird nicht nur die Wäsche sauber. Durch den Abrieb von Synthetikfasern gelangen mit dem Abwasser auch winzige Kunststoffpartikel in die Umwelt. Biologinnen und Biologen der Universität Bonn wollen zusammen mit dem Fraunhofer UMSICHT und der Firma Hengst nach dem Vorbild von Fischkiemen einen effizienten, nachhaltigen und haltbaren Waschmaschinenfilter entwickeln. Das Projekt »FishFlow« wird vom Bundesministerium für Bildung und Forschung (BMBF) für ein Jahr mit rund 500 000 Euro gefördert.

Im Fokus stehen Filtertechnologien, die die Verbreitung der unter fünf Millimeter kleinen Kunststoffteilchen unterbinden. Wissenschaftlerinnen und Wissenschaftler der Universität Bonn nehmen nun das Maul von Fischen als biologisches Vorbild für neuartige Filter. »Es gibt viele filtrierende Tiere, aber der Apparat der Fische, von den Kiemenbögen bis zur Weiterleitung der Nahrung in den Verdauungstrakt, weist im Vergleich die höchste Ähnlichkeit zu den Verhältnissen in der Waschmaschine auf«, sagt Prof. Alexander Blanke vom Institut für Evolutionsbiologie und Ökologie der Universität Bonn.

In der Waschmaschine wird nicht nur die Wäsche sauber. Durch den Abrieb von Synthetikfasern gelangen mit dem Abwasser auch winzige Kunststoffpartikel in die Umwelt. Biologinnen und Biologen der Universität Bonn wollen zusammen mit dem Fraunhofer UMSICHT und der Firma Hengst nach dem Vorbild von Fischkiemen einen effizienten, nachhaltigen und haltbaren Waschmaschinenfilter entwickeln. Das Projekt »FishFlow« wird vom Bundesministerium für Bildung und Forschung (BMBF) für ein Jahr mit rund 500 000 Euro gefördert.

Im Fokus stehen Filtertechnologien, die die Verbreitung der unter fünf Millimeter kleinen Kunststoffteilchen unterbinden. Wissenschaftlerinnen und Wissenschaftler der Universität Bonn nehmen nun das Maul von Fischen als biologisches Vorbild für neuartige Filter. »Es gibt viele filtrierende Tiere, aber der Apparat der Fische, von den Kiemenbögen bis zur Weiterleitung der Nahrung in den Verdauungstrakt, weist im Vergleich die höchste Ähnlichkeit zu den Verhältnissen in der Waschmaschine auf«, sagt Prof. Alexander Blanke vom Institut für Evolutionsbiologie und Ökologie der Universität Bonn.

Zusammen mit dem Fraunhofer UMSICHT in Oberhausen und der Firma Hengst in Münster starten die Forschenden ein Projekt, mit dem die Strukturen der Fische nachempfunden werden sollen.

Ziel des Forschungsteams ist ein Filter, der möglichst lange hält, nachhaltig gefertigt ist und eine Rückhalteeffizienz von mehr als 90 Prozent aufweist.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

GRAFE: Plagiarism Protection with Marking Substances in the Plastic Matrix (c) GRAFE Advanced Polymers GmbH
23.08.2021

GRAFE: Plagiarism Protection with Marking Substances in the Plastic Matrix

To ensure product protection and prevent brand piracy, GRAFE has developed a simple and elegant solution that also offers a high level of security. The basis is special markers. "The highly complex pigments with special physical properties designed for this purpose are used in minute quantities within the plastic matrix. With an appropriately calibrated detector, products equipped with them can thus be read and authenticated," explains Business Development Manager Florian Ludwig. At the same time no changes in properties can usually be observed. The detectors can use an LED display to check within seconds whether the unique marker is contained in the product and whether this item is the original product.

To ensure product protection and prevent brand piracy, GRAFE has developed a simple and elegant solution that also offers a high level of security. The basis is special markers. "The highly complex pigments with special physical properties designed for this purpose are used in minute quantities within the plastic matrix. With an appropriately calibrated detector, products equipped with them can thus be read and authenticated," explains Business Development Manager Florian Ludwig. At the same time no changes in properties can usually be observed. The detectors can use an LED display to check within seconds whether the unique marker is contained in the product and whether this item is the original product.

In general, there are two options: x ray and light fluorescence, i.e. fluorescent X-rays or light. With the first option, the base color has no influence (not even black) and the customer benefits from low addition dosage and batch price, but this method requires higher investment. "With light fluorescence, on the other hand, detection is done by a measuring device, which is preconfigured by our partner or by us directly. Different types are available, from handy hand-held measuring devices to stationary office solutions to inline spectrometers, in order to have a control take place directly during production," Ludwig explains. With this method, the masterbatch dosage is based on the base color, among otherv things. The method of operation is fast and simple, and the necessary investment is also manageable.

From injection molding and extrusion to transparent and fiber applications, almost all areas of plastics processing come into question.

Source:

GRAFE Advanced Polymers GmbH

Oerlikon Webinar with a Focus on Customer Service (c) Oerlikon
19.08.2021

Oerlikon Webinar with a Focus on Customer Service

The new series of webinars of the Swiss Oerlikon Group’s Manmade Fibers Solutions business unit will be focusing on services for manmade fiber systems.

Short Overview of the webinars:

  • How ceramics within the yarn path improve the quality of your yarn on September 01
  • myOerlikon – tailored digital services provide a comprehensive overview on September 13
  • Always by your side – with Oerlikon Remote Services on September 22
  • Better safe than sorry – maximize productivity and minimize downtimes with regular machine check-ups on September 29

For more information click here, where we keep you informed about upcoming events.

The new series of webinars of the Swiss Oerlikon Group’s Manmade Fibers Solutions business unit will be focusing on services for manmade fiber systems.

Short Overview of the webinars:

  • How ceramics within the yarn path improve the quality of your yarn on September 01
  • myOerlikon – tailored digital services provide a comprehensive overview on September 13
  • Always by your side – with Oerlikon Remote Services on September 22
  • Better safe than sorry – maximize productivity and minimize downtimes with regular machine check-ups on September 29

For more information click here, where we keep you informed about upcoming events.

Source:

Oerlikon