From the Sector

Reset
4 results
Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System (c) Baldwin Technology Company Inc.
06.11.2023

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

TexCoat G4’s non-contact spray technology offers numerous advantages compared to outdated finishing-chemistry application methods. TexCoat G4 processes a wide range of low-viscosity water-based chemicals, such as durable water-repellents –  including PFAS-free, softeners, anti-microbials, easy-care and flame retardants. The company's technology uses the same chemicals as found in traditional pad baths with no special auxiliaries required.

Testimonial videos from Pincroft Dyeing and Print Works and Graniteville Specialty Fabrics along with a video highlighting Baldwin’s partnership with North Carolina State University will also be screened at their stand.

Source:

Baldwin Technology Company Inc.

09.08.2023

Carrington Textiles and Pincroft Debut at DALO Industry Days

The Danish Ministry of Defence Acquisition and Logistics Organisation (DALO) Industry Days event is scheduled to take place from 23rd to 24th August in Denmark. Carrington Textiles and their main manufacturing facility in the UK, Pincroft, will showcase their latest innovations in military textiles.

Carrington Textiles - after recently announcing the launch of the new stretch military ripstop fabric, Spartan HT Flex Lite, and strategically appointing the new Head of Defence and Security Fabrics -  at the event represents the commercial focus on building on an over 90 years of heritage of manufacturing military fabrics.

Likewise, Pincroft’s latest technology in non-skin contact vector protection for defence textiles and the recent involvement in printing the new Dutch Ministry of Defence’s camouflage pattern as part of their army’s uniform programme, are just a few of the textile services that will be presented at the event.

The Danish Ministry of Defence Acquisition and Logistics Organisation (DALO) Industry Days event is scheduled to take place from 23rd to 24th August in Denmark. Carrington Textiles and their main manufacturing facility in the UK, Pincroft, will showcase their latest innovations in military textiles.

Carrington Textiles - after recently announcing the launch of the new stretch military ripstop fabric, Spartan HT Flex Lite, and strategically appointing the new Head of Defence and Security Fabrics -  at the event represents the commercial focus on building on an over 90 years of heritage of manufacturing military fabrics.

Likewise, Pincroft’s latest technology in non-skin contact vector protection for defence textiles and the recent involvement in printing the new Dutch Ministry of Defence’s camouflage pattern as part of their army’s uniform programme, are just a few of the textile services that will be presented at the event.

Source:

Carrington Textiles

Photo: Pincroft
23.09.2022

Pincroft: Innovative non-skin contact vector protection for military fabrics

Pincroft announced the adoption of an innovative precision spray technology that allows the application of many finishes for textiles, including permethrin for vector protection, to the face of the fabric to avoid contact with the skin.

The system is a more versatile and environmentally friendly alternative to the traditional application method of padding and offers the possibility of applying the chemistry on either face side or both sides of the fabric across the full width.

The benefits of this new equipment are countless not only for the end user but also for the environment. The system allows for a reduction of energy, water and wet pick up of up to 50%, while 100% of the chemistry is recycled. Thanks to the equipment’s precision application technology, less water and chemistry are needed, and its no immersion system means the fabric would require less saturation and a shorter drying time.

Pincroft announced the adoption of an innovative precision spray technology that allows the application of many finishes for textiles, including permethrin for vector protection, to the face of the fabric to avoid contact with the skin.

The system is a more versatile and environmentally friendly alternative to the traditional application method of padding and offers the possibility of applying the chemistry on either face side or both sides of the fabric across the full width.

The benefits of this new equipment are countless not only for the end user but also for the environment. The system allows for a reduction of energy, water and wet pick up of up to 50%, while 100% of the chemistry is recycled. Thanks to the equipment’s precision application technology, less water and chemistry are needed, and its no immersion system means the fabric would require less saturation and a shorter drying time.

Mike Collins, Pincroft’s Managing Director: “This innovative equipment can be used in two ways. The single sided spray finishing can be used where the full effectiveness of the finish is only required on the face side of the end item, for example, vector, fluorocarbon and antimicrobial protection. The dual spray finish may be used to simulate the traditional padding method where full effectiveness of the finish is required dependant on end use, for instance, crease recovery, fabric softening, soil release and moisture management.”

This vector protection solution provided by Pincroft is ACTIGARD®, a branded technology developed by Sanitized AG, with long lasting active ingredients that have proved highly effective against mosquitoes and ticks. This product endures a high number of washes, is suitable for military uniforms and conforms to Standard 100 by Oeko-Tex®.

Source:

Pincroft

Photo: Pincroft
23.09.2022

Pincroft: New camouflage pattern for Dutch soldiers

Pincroft, UK’s largest textile dyer, printer and finisher, developed a new camouflage pattern for the Dutch Ministry of Defence as part of their Defensie Materieel Organisatie’s (DMO) ‘STRONG’ programme that aims to supply combat clothing and equipment to all military personnel part of the Royal Netherlands Navy, Army, Air Force and Marechaussee.

The new fabric and camouflage pattern boast the new Netherlands Fractal Pattern and will be used in at least 480,000 sets of uniforms for soldiers worldwide. The camouflage pattern is being manufactured in a green or woodland style for the Army, Air Force, Marechaussee and Marines, while the Navy receives a blue or marine style design. Pincroft followed the guidelines of the new Netherlands Fractal Pattern (NFP) to create an eight-colour camouflage design that provides high levels of disruption to give soldiers better concealment when needed.

Pincroft, UK’s largest textile dyer, printer and finisher, developed a new camouflage pattern for the Dutch Ministry of Defence as part of their Defensie Materieel Organisatie’s (DMO) ‘STRONG’ programme that aims to supply combat clothing and equipment to all military personnel part of the Royal Netherlands Navy, Army, Air Force and Marechaussee.

The new fabric and camouflage pattern boast the new Netherlands Fractal Pattern and will be used in at least 480,000 sets of uniforms for soldiers worldwide. The camouflage pattern is being manufactured in a green or woodland style for the Army, Air Force, Marechaussee and Marines, while the Navy receives a blue or marine style design. Pincroft followed the guidelines of the new Netherlands Fractal Pattern (NFP) to create an eight-colour camouflage design that provides high levels of disruption to give soldiers better concealment when needed.

The fabric was created by global workwear textile manufacturer, Carrington Textiles, specifically following the Dutch MoD’s requirements on comfort and protection. The result is a lightweight yet durable textile of 210gsm with a composition of 50% cotton, 50% high tenacity nylon and Ripstop for added strength.

The high cotton content of the fabric creates a uniform that’s comfortable to wear due to its softness to the touch, and breathability, as well as providing moisture wicking properties, key elements for the tough conditions soldiers work in. The addition of high tenacity nylon to the fabric, provides added strength and durability, with the Ripstop properties of the fabric offering tear resistance.

Around 480,000 trousers and jackets will be delivered to officers from the Royal Netherlands Navy, Army, Air Force and Marechaussee, during a uniform roll out part of the Dutch MoD’s ‘STRONG’ programme that aims to equip the armed forces in the next 18 months with versatile uniforms and equipment that are adjustable according to the assignment. The pack also includes a raincoat, combat shirt and baseball cap.