From the Sector

Reset
33 results
11.03.2024

Zünd auf Texprocess 2024

Zünd präsentiert technologische Highlights für einen automatisierten und rationellen integrierten Textilzuschnitt auf der Texprocess 2024 in Frankfurt (23. bis 26. April).

Zu den Lösungen für den Textilzuschnitt gehört die Produktionssoftware MindCUT Studio Production, die in ihrer neusten Version mit neuen Funktionen überzeugt. Außerdem zeigt das Unternehmen sein neues Roll Handling System – RHS für den autonomen und unterbrechungsfreien Zuschnitt und präsentiert sein Schneidsystem Zünd G3 Cutter, das in der Grössenausführung L-2500 zu sehen sein.

Zünd präsentiert technologische Highlights für einen automatisierten und rationellen integrierten Textilzuschnitt auf der Texprocess 2024 in Frankfurt (23. bis 26. April).

Zu den Lösungen für den Textilzuschnitt gehört die Produktionssoftware MindCUT Studio Production, die in ihrer neusten Version mit neuen Funktionen überzeugt. Außerdem zeigt das Unternehmen sein neues Roll Handling System – RHS für den autonomen und unterbrechungsfreien Zuschnitt und präsentiert sein Schneidsystem Zünd G3 Cutter, das in der Grössenausführung L-2500 zu sehen sein.

Funktionen in MindCUT Studio
Auf der Texprocess stellt Zünd die sogenannte Feature Recognition vor. Mit dieser neuen Funktion erkennt die Software Motive sowie die verschiedenen Teile eines Kleidungsstücks mithilfe künstlicher Intelligenz und platziert diese für den Zuschnitt hochpräzise auf der Stoffbahn. Der Prozess ist schnell erledigt: Modell auswählen, Motiveigenschaften platzieren und die einzelnen Schnittteile zuweisen. Die Software erkennt deren Positionen und repetiert sie entlang der Stoffbahn. Unmittelbar danach kann der Zuschnitt gestartet werden. Die Motiverkennung mithilfe von KI automatisiert einen bislang manuellen Prozess und erlaubt eine hohe Wiederholgenauigkeit.
Neben der Motiverkennung bietet MindCUT auch eine Printed-Cut-Funktion, die Aufdrucke automatisiert erfasst oder Pattern Matching, das rapportierende Muster erkennt, Materialverzug kompensiert und die Marker automatisch mit der Textilmusterung abgleicht.

Roll Handling System – RHS
Das Rollenmagazin bietet Platz für bis zu zehn Textilrollen und kann auftragsabhängig mit unterschiedlichen oder materialidentischen Textiltypen ausgestattet werden. Mit dem grossen, vollautomatischen Rollenmagazin kann die unterbrechungsfreie Zuschnittzeit erhöht werden. Das Roll Handling System – RHS beschickt den Zünd Cutter komplett autonom mit Material. Das ermöglicht lange Produktionsfenster, in denen keine Bedieneingriffe mehr notwendig sind. Lediglich die Bestückung des Rollenmagazins erfolgt noch manuell. Dabei erfasst die Bedienerin die einzelnen Rollen mittels Barcode-Scan. Materialzuweisung und Steuerung des RHS erfolgen dann direkt über die MindCUT-Software.

Source:

Zünd Systemtechnik AG

Winder manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy Photo: ITA – Institut für Textiltechnik of RWTH Aachen University
Winder manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy
06.03.2024

ITA: Unique Winder for Elastic Filament Yarn Development

Since March 1st 2024, the technical centre of Institut für Textiltechnik of RWTH Aachen University (ITA) has been equipped with an additional winder.

This globally unique winder has been manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy, and enables the development of elastic yarns for numerous and innovative areas of application. Monofilament and multifilament yarns can be spun within a speed range of 100 to 3,200 m/min on bobbins with an industrial standard size of 73.6 mm x 83.8 mm x 115.5 mm.

The use of these bobbins enables immediate further processing along the textile process chain, for example in production of elastic combination yarns or knitting. Due to the high flexibility of this winder in combination with the available spinning plants at ITA, testing is possible with material amounts starting from a few hundred grams up to hundreds of kilograms.

Since March 1st 2024, the technical centre of Institut für Textiltechnik of RWTH Aachen University (ITA) has been equipped with an additional winder.

This globally unique winder has been manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy, and enables the development of elastic yarns for numerous and innovative areas of application. Monofilament and multifilament yarns can be spun within a speed range of 100 to 3,200 m/min on bobbins with an industrial standard size of 73.6 mm x 83.8 mm x 115.5 mm.

The use of these bobbins enables immediate further processing along the textile process chain, for example in production of elastic combination yarns or knitting. Due to the high flexibility of this winder in combination with the available spinning plants at ITA, testing is possible with material amounts starting from a few hundred grams up to hundreds of kilograms.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

(c) Zünd Systemtechnik AG
09.02.2024

Zünd auf der Fespa

Zünd ist vom 19. bis 22. März auf Europas führender Messe für den digitalen Grossformatdruck, der Fespa Global Print Expo in Amsterdam vertreten.

Zünd zeigt, wie leistungsstarke Schneidtechnologie in Verbindung mit intelligenter Software und diversen optionalen Lösungen für das automatisierte Materialhandling den digitalen Zuschnitt effizient und rentabel gestalten. Unabhängig von ihrer Unternehmensgröße verlängern Werbemittelhersteller mit den Schneidlösungen die Betriebszeiten und senken gleichzeitig die Betriebskosten. Damit kann die Gesamtwirtschaftlichkeit des Zuschnitts nachhaltig erhöht werden.

Das Produktsortiment ist sehr modular aufgebaut und erlaubt es, einen Cutter mit wachsenden Anforderungen einfach und schnell mit Werkzeugen und Materialhandlingoptionen nachzurüsten und auf individuelle Anforderungen massgeschneidert zu konfigurieren.

Zünd ist vom 19. bis 22. März auf Europas führender Messe für den digitalen Grossformatdruck, der Fespa Global Print Expo in Amsterdam vertreten.

Zünd zeigt, wie leistungsstarke Schneidtechnologie in Verbindung mit intelligenter Software und diversen optionalen Lösungen für das automatisierte Materialhandling den digitalen Zuschnitt effizient und rentabel gestalten. Unabhängig von ihrer Unternehmensgröße verlängern Werbemittelhersteller mit den Schneidlösungen die Betriebszeiten und senken gleichzeitig die Betriebskosten. Damit kann die Gesamtwirtschaftlichkeit des Zuschnitts nachhaltig erhöht werden.

Das Produktsortiment ist sehr modular aufgebaut und erlaubt es, einen Cutter mit wachsenden Anforderungen einfach und schnell mit Werkzeugen und Materialhandlingoptionen nachzurüsten und auf individuelle Anforderungen massgeschneidert zu konfigurieren.

More information:
Fespa Zünd Systemtechnik AG
Source:

Zünd Systemtechnik AG

Foto Zünd Systemtechnik AG
30.01.2024

Zünd: Niederlassung in Brasilien

Anfang 2024 hat Zünd den langjährigen Vertriebspartner BG Soluções Tecnológicas mit Sitz in Porto Alegre übernommen.

Seit Anfang 2024 ist BG Soluções Tecnológicas eine hundertprozentige Tochtergesellschaft der Zünd Systemtechnik AG und firmiert neu unter dem Namen Zund Brasil. BG Soluções Tecnológicas wurde 1981 von Sergio und Paulo Guerra gegründet und war seit 1990 offizieller Vertriebs- und Servicepartner der Zünd Systemtechnik AG.

Zund Brasil verlegt seinen Firmensitz von Porto Alegre in das rund 1000 km nördlich gelegene São Paulo, mit über 12 Millionen Einwohnern die größte Stadt Brasiliens und der größte industrielle Ballungsraum Lateinamerikas. Ein eigener Showroom bietet Kunden und Interessenten die Gelegenheit, die vielfältigen Möglichkeiten digitaler Schneidtechnologie vor Ort zu erleben. Die 10 Mitarbeitenden sind Experten in Beratung, Schulung, Installation und Service. Als CEO von Zund Brasil fungiert Cristiano Guerra. Mit dem neuen Tochterunternehmen kann Zünd in Lateinamerika weiter expandieren und das grosse Marktpotenzial optimal ausschöpfen.

Anfang 2024 hat Zünd den langjährigen Vertriebspartner BG Soluções Tecnológicas mit Sitz in Porto Alegre übernommen.

Seit Anfang 2024 ist BG Soluções Tecnológicas eine hundertprozentige Tochtergesellschaft der Zünd Systemtechnik AG und firmiert neu unter dem Namen Zund Brasil. BG Soluções Tecnológicas wurde 1981 von Sergio und Paulo Guerra gegründet und war seit 1990 offizieller Vertriebs- und Servicepartner der Zünd Systemtechnik AG.

Zund Brasil verlegt seinen Firmensitz von Porto Alegre in das rund 1000 km nördlich gelegene São Paulo, mit über 12 Millionen Einwohnern die größte Stadt Brasiliens und der größte industrielle Ballungsraum Lateinamerikas. Ein eigener Showroom bietet Kunden und Interessenten die Gelegenheit, die vielfältigen Möglichkeiten digitaler Schneidtechnologie vor Ort zu erleben. Die 10 Mitarbeitenden sind Experten in Beratung, Schulung, Installation und Service. Als CEO von Zund Brasil fungiert Cristiano Guerra. Mit dem neuen Tochterunternehmen kann Zünd in Lateinamerika weiter expandieren und das grosse Marktpotenzial optimal ausschöpfen.

Source:

Zünd Systemtechnik AG

Prof. Dr Tae Jin Kang (Seoul National University), Dr Musa Akdere (CarboScreen), Dr Christian P. Schindler (ITMF), from left to right. Source: ITMF
Prof. Dr Tae Jin Kang (Seoul National University), Dr Musa Akdere (CarboScreen), Dr Christian P. Schindler (ITMF), from left to right.
01.12.2023

Faster and cheaper carbon fibre production with CarboScreen

Faster and more cost-effective carbon fibre production - the technology of the start-up CarboScreen comes a good deal closer to this dream. The founders Dr. Musa Akdere, Felix Pohlkemper and Tim Röding from the Institut für Textiltechnik (ITA) of RWTH Aachen University are using sensor technology to monitor carbon fibre production, thereby doubling the production speed from the current 15 to 30 m/min in the medium term and increasing turnover by up to €37.5 million per year and system. This ground-breaking development also impressed the jury at the ITMF at their Annual Conference in Keqiao, China, and was honoured with the ITMF StartUp Award 2023 on 6 November 2023.

Dr. Musa Akdere accepted the award on behalf of the CarboScreen founding team.

Carbon fibres can only develop their full potential if they are not damaged during production and further processing. Two types of fibre damage occur more frequently during fibre production: Superficial or mechanical damage to the fibres or damage to the chemical structure.

Faster and more cost-effective carbon fibre production - the technology of the start-up CarboScreen comes a good deal closer to this dream. The founders Dr. Musa Akdere, Felix Pohlkemper and Tim Röding from the Institut für Textiltechnik (ITA) of RWTH Aachen University are using sensor technology to monitor carbon fibre production, thereby doubling the production speed from the current 15 to 30 m/min in the medium term and increasing turnover by up to €37.5 million per year and system. This ground-breaking development also impressed the jury at the ITMF at their Annual Conference in Keqiao, China, and was honoured with the ITMF StartUp Award 2023 on 6 November 2023.

Dr. Musa Akdere accepted the award on behalf of the CarboScreen founding team.

Carbon fibres can only develop their full potential if they are not damaged during production and further processing. Two types of fibre damage occur more frequently during fibre production: Superficial or mechanical damage to the fibres or damage to the chemical structure.

Both types of damage cannot be optimally detected by current means or only become apparent after production, to name just two examples. This leads to higher production costs. In an emergency, faulty production can even lead to plant fires. For this reason, and to ensure good production quality, the system is run at 15 m/min below its production capacity for safety reasons. However, 30 m/min or more would be possible. With the sensor-based online monitoring of CarboScreen, the production capacity can be doubled to 30 /min. This would lead to higher production, resulting in lower manufacturing costs and wider use of carbon fibres in mass markets such as automotive, aerospace and wind energy.

More information:
carbon fibers sensors Startup
Source:

ITA – Institut für Textiltechnik of RWTH Aachen University
 

ZCC Zünd Cut Center (c) Zünd Systemtechnik AG
ZCC Zünd Cut Center
01.09.2023

ZCC Zünd Cut Center: Neuer automatisierter Zuschnitt

Zünd hat seine Bediensoftware ZCC Zünd Cut Center grundlegend überarbeitet. In der Version 4 bietet die Software neue Möglichkeiten für eine flexibel automatisierte Auftragsvorbereitung und einen effizienten Zuschnitt. Die Cuttersteuerung via Touchdisplay macht die Bedienung intuitiv und einfach.

Das neue ZCC Zünd Cut Center ist eine neue Option in Sachen Flexibilität, Skalierbarkeit und Benutzerfreundlichkeit. Es unterstützt die Bedienerin mit zahlreichen intuitiven, intelligenten Funktionen, die über den gesamten Produktionsworkflow des digitalen Zuschnitts hinweg eingebaut sind – eine Softwaresuite für den schnellen und einfachen Einstieg in den digitalen Zuschnitt und deutlichen Verbesserungen für Erfahrene in der Automatisierung von Auftragsvorbereitung und Produktion. ZCC will in jeder Situation qualitativ hochwertige Schneidergebnisse erreichen, unabhängig vom Erfahrungsgrad des Bedieners oder dem Automatisierungsgrad in der Datenaufbereitung.

Zünd hat seine Bediensoftware ZCC Zünd Cut Center grundlegend überarbeitet. In der Version 4 bietet die Software neue Möglichkeiten für eine flexibel automatisierte Auftragsvorbereitung und einen effizienten Zuschnitt. Die Cuttersteuerung via Touchdisplay macht die Bedienung intuitiv und einfach.

Das neue ZCC Zünd Cut Center ist eine neue Option in Sachen Flexibilität, Skalierbarkeit und Benutzerfreundlichkeit. Es unterstützt die Bedienerin mit zahlreichen intuitiven, intelligenten Funktionen, die über den gesamten Produktionsworkflow des digitalen Zuschnitts hinweg eingebaut sind – eine Softwaresuite für den schnellen und einfachen Einstieg in den digitalen Zuschnitt und deutlichen Verbesserungen für Erfahrene in der Automatisierung von Auftragsvorbereitung und Produktion. ZCC will in jeder Situation qualitativ hochwertige Schneidergebnisse erreichen, unabhängig vom Erfahrungsgrad des Bedieners oder dem Automatisierungsgrad in der Datenaufbereitung.

Dank ihrer Client-Server-Architektur ist Zünd Cut Center flexibel skalierbar. Diese Modularität ermöglicht auf spezifische Produktionsanforderungen zugeschnittene Konfigurationen. Der Anwender erwirbt nur jene Softwarekomponenten, die er benötigt und kann jederzeit weitere Optionen hinzufügen.

ZCC Zünd Cut Center
Zünd bietet das ZCC in zwei verschiedenen Editionen an. Zünd Cut Center Basic ist geeignet für alle, die aufgrund ihrer Produktionsumgebung Funktionen wie einen automatischen Datenimport, eine Auftragsliste oder einen Datenaustausch mit anderen Systemen nicht benötigen. Mit ZCC Zünd Cut Center Basic kann der Bediener Quelldateien manuell über den Cut Editor in .zcc-Dateien umwandeln und als Produktionsdatei im Cut Center öffnen.

ZCC Zünd Cut Center Advanced ist die passende Edition für alle Anwender mit einem höheren Auftragsvolumen und dem Wunsch, durch automatisierte Abläufe die Produktivität zu steigern. Sie haben mehrere Zünd Cutter parallel im Einsatz und wollen zwecks Datenaustausch auch andere Produktionssysteme in den Workflow integrieren. In der Advanced-Edition stehen der Anwenderin Funktionen wie die Auftragsliste, Angaben zur geschätzten Produktionszeit, der Import über Hotfolder oder E-Mail-Benachrichtigungen zur Verfügung.

Für beide Editionen können Softwareoptionen wie Camera Option, Pick & Place Option, Visualizing Option und Routing Option individuell erworben werden.

Source:

Zünd Systemtechnik AG

(c) ITM/TUD
Herr Philipp Weigel, Preisträger des ITMA Sustainable Innovation Award - Research & Innovation Excellence  Award, auf dem Messestand des ITM auf der ITMA 2023
16.06.2023

Philipp Weigel erhält 1. Preis des ITMA Research & Innovation Excellence Award

Im Rahmen der diesjährigen ITMA 2023, der internationalen Textilmaschinenausstellung und Plattform für die gesamte Textilmaschinenbranche, die vom 08. bis 14. Juni 2023 in Mailand stattfand, wurde Herr Dipl.-Ing. Philipp Weigel für seine am ITM angefertigte exzellente Studienarbeit "Numerische Simulation des Struktur- und Auszugverhaltensparametrisch generierter profilierter Carbonpolymergarne" mit dem ITMA Sustainable Innovation Award in der Kategrie "Research & Innovation Excellence Award" ausgezeichnet. Er erhielt hierfür den 1. Preis, der mit 10.000 EUR dotiert ist.
 
Die Arbeit ist von großem wissenschaftlichen Interesse für die Entwicklung hochleistungsfähiger, ressourcenschonender Carbonbetonbauteile mit höchster Materialeffizienz und Nachhaltigkeit sowie für die simulative Beschreibung und digitale Auslegung der Bewehrungsstruktur.

CEMATEX-Präsident Ernesto Maurer überreichte das Preisgeld und Urkunde an die glücklichen Gewinner:nnen während der ITMA 2023 in Mailand, Italien.

Der 2. und 3. Preis ging an Absolventen des Instituts für Textiltechnik der RWTH Aachen.

Im Rahmen der diesjährigen ITMA 2023, der internationalen Textilmaschinenausstellung und Plattform für die gesamte Textilmaschinenbranche, die vom 08. bis 14. Juni 2023 in Mailand stattfand, wurde Herr Dipl.-Ing. Philipp Weigel für seine am ITM angefertigte exzellente Studienarbeit "Numerische Simulation des Struktur- und Auszugverhaltensparametrisch generierter profilierter Carbonpolymergarne" mit dem ITMA Sustainable Innovation Award in der Kategrie "Research & Innovation Excellence Award" ausgezeichnet. Er erhielt hierfür den 1. Preis, der mit 10.000 EUR dotiert ist.
 
Die Arbeit ist von großem wissenschaftlichen Interesse für die Entwicklung hochleistungsfähiger, ressourcenschonender Carbonbetonbauteile mit höchster Materialeffizienz und Nachhaltigkeit sowie für die simulative Beschreibung und digitale Auslegung der Bewehrungsstruktur.

CEMATEX-Präsident Ernesto Maurer überreichte das Preisgeld und Urkunde an die glücklichen Gewinner:nnen während der ITMA 2023 in Mailand, Italien.

Der 2. und 3. Preis ging an Absolventen des Instituts für Textiltechnik der RWTH Aachen.

Der ITMA Sustainable Innovation Award wurde von CEMATEX ins Leben gerufen, um die gemeinsamen Anstrengungen der globalen Textilindustrie zur Förderung der Nachhaltigkeit von Unternehmen durch innovative Lösungen und zur Förderung herausragender branchenspezifischer Forschung zu würdigen.
Der Preis umfasst zwei Kategorien: einen Industry Excellence Award für Textil- und Bekleidungshersteller und einen Research & Innovation Excellence Award, der für Master-Studenten offen ist.

Source:

Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) - TU Dresden

(c) Zünd Systemtechnik AG
14.04.2023

Zünd auf der Interzum 2023

Zünd, ein Spezialist für Zuschnittlösungen für die Polstermöbelindustrie, stellt unter dem Motto «Efficiency to rely on» auf der Interzum 2023 (09.–12.05.2023) die Produktivität und Zuschnitteffizienz in den Fokus.

Am Stand erfährt das Fachpublikum die Vorteile des integrierten Lederzuschnitts am Beispiel eines Zünd D3 Cutters mit Doppelbalkentechnologie. Zünd widmet seinen Messeauftritt sämtlichen Prozessen zwischen Hauterfassung, Zuschnitt und Absortierung. Das Fachpublikum kann sich über modulare Lösungen für die Digitalisierung und das Nesting, den Textil- und Lederzuschnitt und softwareunterstützte Teileentnahme informieren.

Darüber hinaus rückt Zünd seinen integrierten Beratungsansatz in den Vordergrund: «Wir bieten Workflowlösungen für unterschiedlichste Anforderungen und erarbeiten individuell mit unseren Kunden, welche Lösungen am besten zu ihren Herstellungsprozessen und verwendeten Materialien passen. Das bedingt einen einheitlichen Beratungsansatz, der Hardware, Software und Servicedienstleistungen einbezieht», erklärt Manuel Enriquez, Segment Manager Leder.

Zünd, ein Spezialist für Zuschnittlösungen für die Polstermöbelindustrie, stellt unter dem Motto «Efficiency to rely on» auf der Interzum 2023 (09.–12.05.2023) die Produktivität und Zuschnitteffizienz in den Fokus.

Am Stand erfährt das Fachpublikum die Vorteile des integrierten Lederzuschnitts am Beispiel eines Zünd D3 Cutters mit Doppelbalkentechnologie. Zünd widmet seinen Messeauftritt sämtlichen Prozessen zwischen Hauterfassung, Zuschnitt und Absortierung. Das Fachpublikum kann sich über modulare Lösungen für die Digitalisierung und das Nesting, den Textil- und Lederzuschnitt und softwareunterstützte Teileentnahme informieren.

Darüber hinaus rückt Zünd seinen integrierten Beratungsansatz in den Vordergrund: «Wir bieten Workflowlösungen für unterschiedlichste Anforderungen und erarbeiten individuell mit unseren Kunden, welche Lösungen am besten zu ihren Herstellungsprozessen und verwendeten Materialien passen. Das bedingt einen einheitlichen Beratungsansatz, der Hardware, Software und Servicedienstleistungen einbezieht», erklärt Manuel Enriquez, Segment Manager Leder.

Source:

Zünd Systemtechnik AG

(c) Zünd Systemtechnik AG
06.04.2023

ITMA 2023: Zünd presents digital single- ply cutting

At ITMA 2023 in Milan, Zünd is focusing on the advantages of digital single-ply cutting in modern garment production.

At the show, Zünd will demonstrate the advantages of individual cutting on demand and what benefits single-ply cutting of textiles offers. In the course of digitalization, the market environment of the apparel industry has changed. Producers are responding to increasing digitalization and ever-shorter product life cycles by investing in lean and highly automated production workflows. Solutions from Zünd supported process streamlining from ordering to cutting while minimizing manual interventions.

At ITMA 2023 in Milan, Zünd is focusing on the advantages of digital single-ply cutting in modern garment production.

At the show, Zünd will demonstrate the advantages of individual cutting on demand and what benefits single-ply cutting of textiles offers. In the course of digitalization, the market environment of the apparel industry has changed. Producers are responding to increasing digitalization and ever-shorter product life cycles by investing in lean and highly automated production workflows. Solutions from Zünd supported process streamlining from ordering to cutting while minimizing manual interventions.

Zünd's single-ply cutters are the cutting tools in digitized production, offering manufacturers flexibility and profitability. Intelligent automation functions, optical solutions and software tools facilitate resource optimization, keep an eye on material consumption and support employees who can turn their attention to value-adding activities. With digital single-layer cutting, manufacturers speed up their cutting and expand their production capacities at the same time. They can accept orders at very short notice and easily meet delivery times thanks to highly economical and efficiently scalable on-demand production. Peaks in demand can be easily managed.

Zünd cutters give users new flexibility in their production workflow. He can work with complex motifs, demanding textiles and different shapes. The cutting technology enables the apparel industry to produce highly individualized customized garments in small batches and on demand just as economically and efficiently as in high volumes. It can process and handle more orders in less time. At the same time, both material and time are saved. In combination with the MindCut production software and precise single-layer cutting, there is almost no waste. The cut parts can be nested very close to each other and close to the material edges. This not only offers considerable savings potential, but also helps to reduce the ecological footprint.

Source:

Zünd Systemtechnik AG

13.03.2023

ITMF-Webinar series on “Digital Workflow" and the “Circular Textile Economy"

ITMF has invited some of the start-ups that have presented at the ITMF Annual Conference 2023 to share in more depth during a series of interactive webinars their digital platforms/tools and how companies can benefit from digital workflows. The first webinar with the start-up “ColorDigital” took place in the first half of February. The second webinar will take place in March with the start-up “Frontier.Cool”.

In cooperation with the “Institut für Textiltechnik” (Institute for Textile Technology) of RWTH Aachen University, ITMF has developed a series of webinars that will have a closer look at the concept, political and legal environment as well as technology regarding circularity and recycling in the textile industry. In six webinars of 60-75 minutes each, international experts will discuss the backgrounds and potential of circularity in the textile industry. The webinar series start in March and will be completed by the end of May 2023.

The webinars are free of charge for ITMF members and all their affiliated members.  

Please check the Textination schedule for all details.

ITMF has invited some of the start-ups that have presented at the ITMF Annual Conference 2023 to share in more depth during a series of interactive webinars their digital platforms/tools and how companies can benefit from digital workflows. The first webinar with the start-up “ColorDigital” took place in the first half of February. The second webinar will take place in March with the start-up “Frontier.Cool”.

In cooperation with the “Institut für Textiltechnik” (Institute for Textile Technology) of RWTH Aachen University, ITMF has developed a series of webinars that will have a closer look at the concept, political and legal environment as well as technology regarding circularity and recycling in the textile industry. In six webinars of 60-75 minutes each, international experts will discuss the backgrounds and potential of circularity in the textile industry. The webinar series start in March and will be completed by the end of May 2023.

The webinars are free of charge for ITMF members and all their affiliated members.  

Please check the Textination schedule for all details.

Source:

Institut für Textiltechnik (ITA) of RWTH Aachen University

 

Photo Pixabay
13.01.2023

Zünd: New subsidiary in Spain

As of the beginning of 2023, Zünd Systemtechnik AG acquired its long-standing sales partner Sign-Tronic S.A, which is based in Barcelona.

Sign-Tronic S.A. has been a wholly owned subsidiary of Zünd Systemtechnik AG since the start of 2023 and now operates under the name Zund Ibérica. Sign-Tronic S.A. was established in 1990 and has been an official sales and service partner of Zünd Systemtechnik AG since 1994. Zund Ibérica serves numerous customers in Spain, Portugal and Andorra.

Jordi Lorente is the new CEO of Zund Ibérica. For the time being, he will be actively supported by the previous co-owner and Managing Director Flemming Jensen. Rosa Miralles, also a co-owner, will continue to work in an executive capacity at Zund Ibérica.

As of the beginning of 2023, Zünd Systemtechnik AG acquired its long-standing sales partner Sign-Tronic S.A, which is based in Barcelona.

Sign-Tronic S.A. has been a wholly owned subsidiary of Zünd Systemtechnik AG since the start of 2023 and now operates under the name Zund Ibérica. Sign-Tronic S.A. was established in 1990 and has been an official sales and service partner of Zünd Systemtechnik AG since 1994. Zund Ibérica serves numerous customers in Spain, Portugal and Andorra.

Jordi Lorente is the new CEO of Zund Ibérica. For the time being, he will be actively supported by the previous co-owner and Managing Director Flemming Jensen. Rosa Miralles, also a co-owner, will continue to work in an executive capacity at Zund Ibérica.

Zund Ibérica currently employs 15 people. With more than 1,000 cutters installed, Zund Ibérica is one of the most experienced distributors of both digital cutting systems and software and workflow solutions on the Iberian market. It has its own showroom, which allows customers and interested parties to experience the many possibilities of Zünd’s digital cutting technology in person. Its staff consists of proven experts in consulting, training, installation, and service.

Source:

Zünd Systemtechnik AG

(c) Fraunhofer UMSICHT
28.12.2022

Bewerbungsphase für UMSICHT-Wissenschaftspreis 2023 ist gestartet

Von regenerativen Energien, nachwachsenden Rohstoffen über innovative Werkstoffe, Wassertechnik bis zu Wissens- und Ressourcenmanagement – gemeinsam tragen sie zu einer zukunftsfähigen und nachhaltigen Welt bei. Grundvoraussetzung dafür ist ein gesellschaftlicher Diskurs, in dem neue Entwicklungen Aufmerksamkeit bekommen und verbreitet werden. Mit dem UMSICHT-Wissenschaftspreis prämiert der Förderverein des Fraunhofer UMSICHT zum 14. Mal Menschen, die mit ihrer Arbeit diesen Diskurs ermöglichen.

Von regenerativen Energien, nachwachsenden Rohstoffen über innovative Werkstoffe, Wassertechnik bis zu Wissens- und Ressourcenmanagement – gemeinsam tragen sie zu einer zukunftsfähigen und nachhaltigen Welt bei. Grundvoraussetzung dafür ist ein gesellschaftlicher Diskurs, in dem neue Entwicklungen Aufmerksamkeit bekommen und verbreitet werden. Mit dem UMSICHT-Wissenschaftspreis prämiert der Förderverein des Fraunhofer UMSICHT zum 14. Mal Menschen, die mit ihrer Arbeit diesen Diskurs ermöglichen.

Klimawandel und globale Krisen zeigen es auf: Die Menschheit braucht Veränderungen. Veränderungen, die unseren Alltag direkt betreffen, setzen sich langfristig aber nur mit einer breiten gesellschaftlichen Akzeptanz durch – als Beispiele seien nachhaltige Agrarprodukte, Verpackungen, Mobilität oder Energie genannt. Gerade deshalb ist es so wichtig, den Diskurs über Innovationen und wissenschaftliche Errungenschaften zu stärken und so ein Vertrauen in diese aufzubauen. Dabei kann die Basis für den Diskurs verschiedene Formen haben: Während die einen Fortschritte in ihrer Disziplin erlangen und auf Fachebene kommunizieren, bereiten andere diese für die Allgemeinheit möglichst verständlich auf. Nur so kann die gesamte Gesellschaft an der Gestaltung einer nachhaltigen Zukunft teilhaben.

Kommunikation: Wissenschaft und Gesellschaft
Seit 2010 verleiht der UMSICHT-Förderverein den UMSICHT-Wissenschaftspreis und zeichnet Menschen aus, die Forschungsergebnissen aus den Bereichen Umwelt-, Verfahrens- und Energietechnik – den Kernthemen des Fraunhofer UMSICHT – der Gesellschaft zugänglich machen. Das Preisgeld verteilt sich auf einen mit 8000 Euro dotierten Preis in der Kategorie Wissenschaft und einen mit 2000 Euro dotierten Preis für journalistische Arbeiten.

Bewerbung
Sämtliche veröffentlichte Arbeiten sind zugelassen, die sich mit den Themen Umwelt-, Verfahrens- oder Energietechnik beschäftigen. Wissenschaftliche Arbeiten dürfen nicht älter als zwei Jahre, journalistische Arbeiten nicht älter als ein Jahr sein. Beide können auf Deutsch oder Englisch eingereicht werden. Bei Gemeinschaftsarbeiten ist darauf zu achten, dass die Haupt-Anteilsträgerin bzw. der Haupt-Anteilsträger die Arbeit einreicht.

Bewerbungsschluss ist der 28. Februar 2023.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

Photo VDMA
12.12.2022

Young Talent Award for AI supported production control of carbon fibres

  • Formula 1 cars will be cheaper in future

Carbon is the stuff Formula 1 cars are made of, at least the bodywork. But until now, carbon has been expensive. It can be produced more cheaply and efficiently if artificial intelligence monitors the production processes. A camera system combined with artificial intelligence automatically detects defects in the production of carbon fibres. This makes expensive manual inspection of the carbon fibres obsolete and the production price of the carbon fibre can be reduced in the long term.

For this idea, the young engineer Deniz Sinan Yesilyurt received the second prize of the "Digitalisation in Mechanical Engineering" Young Talent Award on 6 December.

  • Formula 1 cars will be cheaper in future

Carbon is the stuff Formula 1 cars are made of, at least the bodywork. But until now, carbon has been expensive. It can be produced more cheaply and efficiently if artificial intelligence monitors the production processes. A camera system combined with artificial intelligence automatically detects defects in the production of carbon fibres. This makes expensive manual inspection of the carbon fibres obsolete and the production price of the carbon fibre can be reduced in the long term.

For this idea, the young engineer Deniz Sinan Yesilyurt received the second prize of the "Digitalisation in Mechanical Engineering" Young Talent Award on 6 December.

Carbon fibres are sought after because of their good properties. They are very light - they weigh up to 50 percent less than aluminium. The combination of low weight and good mechanical properties offers many advantages. Especially in times of the energy transition, lightweight materials like carbon are more relevant than ever before. At the same time, carbon fibres are as resistant to external stresses as metals. However, achieving these good properties of carbon fibres is very complex.


Up to 300 individual fibre strands - bundles of individual fibres - have to be monitored simultaneously during production. If carbon fibres tear, it costs time and money to sort out the damaged fibres. This is just one example of various defects that can occur in the fibres during production.


Therefore, Deniz Sinan Yesilyurt attached a camera to the carbon fibre line that takes pictures of various fibre defects during production and collects them in a database. The artificial intelligence in the camera's information technology system evaluates the fibre defects by assigning the images to predefined reference defects. In doing so, it recognises various fibre defects with a classification accuracy of 99 per cent. The process can also be used in other areas that produce chemical fibres.

Deniz Sinan Yesilyurt received the prize from the German Engineering Federation (VDMA) in Frankfurt am Main, Germany. He is a Bachelor's graduate at the Institut für Textiltechnik (ITA) of RWTH Aachen University. The full title of his bachelor's thesis is: "Development of a Kl-supported process monitoring using machine learning to detect fibre damage in the stabilisation process". The VDMA awarded the prize to a total of four theses from different universities. The prize is awarded for outstanding theses and was offered in Germany, Austria and Switzerland.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen Universit

(c) Brückner / TEXCOM
from left to right: Ronaldo Huber (MAPEKO), Esteban Scigliano (TEXCOM) and Rodrigo Huber (MAPEKO) in front of one of the two new BRÜCKNER POWER-FRAME stenters
06.12.2022

TEXCOM started up BRÜCKNER POWER-FRAME stenters

TEXCOM has recently started up two new BRÜCKNER POWER-FRAME stenters for knitted fabric with eight compartments and lubrication-free vertical chain and direct gas heating. This is already the 5th BRÜCKNER line purchased by TEXCOM and the successful continuation of the cooperation with BRÜCKNER since 1979. The third member of this successful alliance is the commercial agency, MAPEKO, which has been active for BRÜCKNER for several decades and in the 3rd generation.

With 3 production plants, a commercial office and 6 sales stores distributed around the country, TEXCOM manufactures and distributes knitted fabrics for a highly demanded market, where sports, technical, fashion and workwear fabrics stand out. The company's own developments, such as Twintex, Polisap, Neodry, Sense, Texcom antibacterial, among other brands, are perfect for sports and leisure due to their technical attributes. The company attaches great importance to the fact that all processed materials have the appropriate current environmental certificate (Öko Tex Standard 100, BlueSign and ZDHC)and efficient as well as responsible chemicals are used.

TEXCOM has recently started up two new BRÜCKNER POWER-FRAME stenters for knitted fabric with eight compartments and lubrication-free vertical chain and direct gas heating. This is already the 5th BRÜCKNER line purchased by TEXCOM and the successful continuation of the cooperation with BRÜCKNER since 1979. The third member of this successful alliance is the commercial agency, MAPEKO, which has been active for BRÜCKNER for several decades and in the 3rd generation.

With 3 production plants, a commercial office and 6 sales stores distributed around the country, TEXCOM manufactures and distributes knitted fabrics for a highly demanded market, where sports, technical, fashion and workwear fabrics stand out. The company's own developments, such as Twintex, Polisap, Neodry, Sense, Texcom antibacterial, among other brands, are perfect for sports and leisure due to their technical attributes. The company attaches great importance to the fact that all processed materials have the appropriate current environmental certificate (Öko Tex Standard 100, BlueSign and ZDHC)and efficient as well as responsible chemicals are used.

With more than 100 circular knitting machines and a wide range of possibilities for rotary printing, sublimation, lamination as well as special finishes such as antibacterial or hydrophilic, TEXCOM produces premium sports and leisure wear. This includes the official jersey of Argentina's national soccer team.

More information:
TEXCOM Brückner stenters
Source:

Brückner Trockentechnik GmbH & Co. KG

(c) Zünd Systemtechnik AG
25.10.2022

Zünd: Heat Sealing Module – HSM receives composites industry award

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

During processing, dry fiber materials are prone to fraying along the edges. Using hot air, the HSM seals the fabric along the cut path in advance of the Zünd Power Rotary Tool – PRT cutting it. Because of this sealing process, the cut can then be performed at full speed, in any direction, and produces both higher-quality parts and greater production efficiencies.

The HSM helps create clean, sealed edges when cutting fiber-reinforced thermoplastic composites. It benefits not only the cutting process itself, but other production processes downstream. Cutting this way leaves behind no loose or uncut fibers and maintains a clean cutting surface and uncontaminated production environment. At the same time, it ensures that cut parts maintain their shape, and this increased stability makes them much easier to handle, especially in fully automated production workflows.

Source:

Zünd Systemtechnik AG

(c) BRÜCKNER
The project team of BRÜCKNER and HEATHCOAT in BRÜCKNER’s Technology Centre in Leonberg
04.10.2022

BRÜCKNER: New finishing line for British company HEATHCOAT FABRICS

HEATHCOAT FABRICS partnered again with BRÜCKNER Textile Technologies and their sales partner ADVANCED DYEING SOLUTIONS to install a finishing line for industrial textiles. HEATHCOAT FABRICS specializes in the production of technical textiles in the fields of texturising, weaving and warp knitting as well as dyeing and finishing. The prroducts are manufactured for use in the automotive, healthcare, defence, and aerospace industries

Mrs. Regina Brückner, CEO and owner of the BRÜCKNER Group stated: "To meet the complex re-quirements of HEATHCOAT is not easy because of the great variety of technical textiles produced. Our line has to finish light as well as heavy articles, so the design, control and the whole line layout have to be flexible, functional and still easy to operate. Fortunately, the team at HEATHCOAT FABRICS is very innovative and open-minded, and together we worked hard to develop the right technology and han-dling. We are very happy that we could convince this customer, whom we appreciate very much, with the productivity of our line and of course with our technological know-how."

HEATHCOAT FABRICS partnered again with BRÜCKNER Textile Technologies and their sales partner ADVANCED DYEING SOLUTIONS to install a finishing line for industrial textiles. HEATHCOAT FABRICS specializes in the production of technical textiles in the fields of texturising, weaving and warp knitting as well as dyeing and finishing. The prroducts are manufactured for use in the automotive, healthcare, defence, and aerospace industries

Mrs. Regina Brückner, CEO and owner of the BRÜCKNER Group stated: "To meet the complex re-quirements of HEATHCOAT is not easy because of the great variety of technical textiles produced. Our line has to finish light as well as heavy articles, so the design, control and the whole line layout have to be flexible, functional and still easy to operate. Fortunately, the team at HEATHCOAT FABRICS is very innovative and open-minded, and together we worked hard to develop the right technology and han-dling. We are very happy that we could convince this customer, whom we appreciate very much, with the productivity of our line and of course with our technological know-how."

The direct gas heated BRÜCKNER POWER-FRAME stenter with its staggered heating source arrangement every half zone provides best available temperature consistency across the length and the width of the stenter. The unit is equipped with a low-lub, horizontally returning combined pin / clip chain and several fabric paths, especially designed for the different fabrics being processed. Together with HEATHCOAT FABRICS technologists, the BRÜCKNER design team developed a special delivery end of the stenter with different edge trimming and slitting possibilities. Depending on the kind of products, the fabrics can be batched on large diameter A-frames, wound on cardboard tubes or plaited into trolleys.

Source:

Brückner Trockentechnik GmbH & Co. KG

01.07.2022

Award for best master's thesis of the German Textile Mechanical Engineering 2022 goes to young engineer of ITA Aachen

The 2002 prize of the Walter Reiners Foundation of the VDMA Textile Machinery Association for the best Master's thesis in German textile mechanical engineering was awarded to a young engineer from the ITA Institut für Textiltechnik of RWTH Aachen University. The prize ceremony took place at Techtextil 2022 in Frankfurt am Main, Germany. Peter D. Dornier, Chairman of the Board of the Walter Reiners Foundation, presented the award at the VDMA Textile Machinery Association’s booth.

Felix Xaver Zerbes, M.Sc., was awarded the "Promotional Prize for the Best Master's Thesis of the German Textile Machinery Industry 2022", endowed with 3,500 EUR, for his master's thesis "Development and Construction of a Separation Unit for Weft Yarns in Air Jet Weaving".

The 2002 prize of the Walter Reiners Foundation of the VDMA Textile Machinery Association for the best Master's thesis in German textile mechanical engineering was awarded to a young engineer from the ITA Institut für Textiltechnik of RWTH Aachen University. The prize ceremony took place at Techtextil 2022 in Frankfurt am Main, Germany. Peter D. Dornier, Chairman of the Board of the Walter Reiners Foundation, presented the award at the VDMA Textile Machinery Association’s booth.

Felix Xaver Zerbes, M.Sc., was awarded the "Promotional Prize for the Best Master's Thesis of the German Textile Machinery Industry 2022", endowed with 3,500 EUR, for his master's thesis "Development and Construction of a Separation Unit for Weft Yarns in Air Jet Weaving".

The subject of the master's thesis was the development of a mechanism with which faulty sections in the weft yarn can be sorted out before they are woven into the textile. This way, both yarn-related weft defects and material defects can be drastically reduced. The prototype developed by Mr Zerbes shows how this can be done even during the ongoing weaving process without having to stop production. Due to its modular design, the yarn rejection unit can be retrofitted to many different types of air-jet weaving machines, which represents an enormous savings potential not only in Germany but in weaving mills all over the world.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

(c) ITM TUD
24.06.2022

VDMA verleiht Nachhaltigkeitspreise an Ingenieurnachwuchs am ITM

Die Verleihung der Förderpreise 2022 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchsingenieur:innen deutscher Universitäten für Spitzenleistungen im Studium fand am 22. Juni 2022 im Rahmen der Techtextil 2022 in Frankfurt/Main statt. Die bundesweit ausgeschriebenen Förderpreise wurden durch Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, auf dem VDMA-Messestand verliehen. Zum ersten Mal stand bei der Auswahl der eingereichten Arbeiten der Fokus auf Nachhaltigkeit.
 
Frau M. Sc. Marina Andrea Michel wurde mit dem mit 3.500 EUR dotierten Nachhaltigkeitspreis für die „Beste Masterarbeit des Deutschen Textilmaschinenbaues 2022“ geehrt. Ihre am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden Abschlussarbeit beschäftigt sich mit der „Funktionalisierung von Garnen mittels Cyclodextrinen zur Filtration von Mikro- und Nanoplastik, Übertragung auf Gewebe“.
 

Die Verleihung der Förderpreise 2022 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchsingenieur:innen deutscher Universitäten für Spitzenleistungen im Studium fand am 22. Juni 2022 im Rahmen der Techtextil 2022 in Frankfurt/Main statt. Die bundesweit ausgeschriebenen Förderpreise wurden durch Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, auf dem VDMA-Messestand verliehen. Zum ersten Mal stand bei der Auswahl der eingereichten Arbeiten der Fokus auf Nachhaltigkeit.
 
Frau M. Sc. Marina Andrea Michel wurde mit dem mit 3.500 EUR dotierten Nachhaltigkeitspreis für die „Beste Masterarbeit des Deutschen Textilmaschinenbaues 2022“ geehrt. Ihre am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden Abschlussarbeit beschäftigt sich mit der „Funktionalisierung von Garnen mittels Cyclodextrinen zur Filtration von Mikro- und Nanoplastik, Übertragung auf Gewebe“.
 
Im Fokus stand ein Verfahren zur textilchemischen Ausrüstung von Garn- und Gewebematerialien aus nachwachsenden Rohstoffen mit Cyclodextrinen, die Mikro- und Nanoplastik (MNP) anbinden. Die grundlegenden Erkenntnisse zeigen dabei das Potenzial daraus hergestellter faserbasierter Filter zur deutlichen und nachhaltigen Minimierung der MNP-Belastung, sowohl von lokalen Trinkwasserquellen bis hin zu globalen Wasserkreisläufen, auf. Die Masterarbeit beinhaltet erstmals die innovative Anwendung von Cyclodextrinmolekülen zur Anbindung kleinster Plastikpartikel unterschiedlicher Form und molekularer Zusammensetzung.
 
Simon Hoebel erhielt den mit 3.000 EUR dotierten Nachhaltigkeitspreis „Beste Forschungsarbeit des Deutschen Textilmaschinenbaues 2022“ über die „Weiterentwicklung des Versuchstandes zur Herstellung von flexiblen hochdrapierbaren Thermoplastfaserbandstrukturen aus recycelten Carbonfasern und Thermoplastfasern für hochbelastbare thermoplastische Verbundbauteile“.
 
Das Ziel der prämierten Forschungsarbeit bestand in der Weiterentwicklung eines Versuchstandes sowie eines anwendungsbezogenen technologischen Knowhows zur Entwicklung und Fertigung von unidirektionalen hochdrapierbaren Thermoplastfaserbandstrukturen aus recycelten Carbonfasern (rCF) und Thermoplastfasern (TFS) für hochbelastbare thermoplastische CFK-Bauteile. Im Rahmen der Forschungsarbeit untersuchte Hoebel den gesamten Prozess zur Herstellung von hochdrapierbaren Thermoplastfaserbandstrukturen von der Kardierung, Verstreckung, Banddoublierung und Konsolidierung. Aus den entwickelten rCF-TFS wurden thermoplastische UD-Verbunde gefertigt und ihre mechanischen Eigenschaften charakterisiert. Die Ergebnisse der Studienarbeit zeigen das Potenzial dieser neuartigen Prozesskette und der darauf basierenden leistungsfähigen und nachhaltigen Thermoplastfaserbandstrukturen auf Basis von rCF.

Source:

Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM)

ECO-COAT minimum application unit (c) Brückner
Minimalauftragsaggregat ECO-COAT
02.06.2022

BRÜCKNER: Answering current challenges of the textile industry

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The company responds to this with a newly developed stenter concept with double heating system. Depending on availability, the lines can be operated with gas or oil, but also other combinations with steam or renewable energies are possible. This means that production delays and machine downtimes can be avoided as far as possible. In addition, developed intelligent assistance systems for its machines have been developed that support the machine operator in using the best possible process to operate the line as energy-efficiently as possible. Further energy savings are possible with new energy-efficient motors or heat-recovery and exhaust air cleaning systems. This also helps to avoid harmful emissions.

But many textile producers are also focusing on reducing chemicals. For this purpose, BRÜCKNER's further developed ECO-COAT minimum application unit can make a decisive contribution. Knitted and woven fabrics, but also nonwovens can be finished on one or both sides via different fabric paths. With the minimum application via an engraved roller, a single-sided application of up to 100 g/m² can be achieved. A double-sided and higher application quantity is achieved, for example, by impregnation in the nip. Irrespective of the selected fabric path, a very small liquor reservoir means that only minimal quantities of waste water are produced when changing batches or liquors, and the use of chemicals can also be significantly reduced. In addition, less water has to be evaporated in the subsequent drying process than, for example, in the case of impregnation in a water bath, so the energy requirement is significantly reduced.

On the two upcoming trade fairs ITM in Istanbul and TECHTEXTIL in Frankfurt in June, interested customers can personally get an idea of BRÜCKNER's new developments.

Source:

Brückner Trockentechnik GmbH & Co. KG

(c) Zünd Systemtechnik AG
22.04.2022

Zünd@Texprocess 2022 – #LetsTalkWorkflow

Zünd präsentiert auf der Texprocess in Frankfurt Softwaretools für jeden Teilprozess des Textilzuschnitts im Zusammenspiel mit leistungsstarken, auf Effizienz ausgerichteten digitalen Schneidsystemen.

Ein digitalisierter und automatisierter Produktionsworkflow ist entscheidend für die wirtschaftliche und standardisierte Textil- und Bekleidungsfertigung. Dies unterstützt Zünd durch vielseitige Automatisierungslösungen, die der Schweizer Gesamtlösungsanbieter für den Textilzuschnitt auf seinem Messestand in Frankfurt vorstellen wird. Sie helfen, die Aufbereitung von Druck- und Schneiddaten zu automatisieren und zu standardisieren, unterstützen bei der Produktionsüberwachung und -analyse, steuern den Zuschnitt und vereinfachen die Entnahme von Schnittteilen und die Logistik.

Zünd präsentiert auf der Texprocess in Frankfurt Softwaretools für jeden Teilprozess des Textilzuschnitts im Zusammenspiel mit leistungsstarken, auf Effizienz ausgerichteten digitalen Schneidsystemen.

Ein digitalisierter und automatisierter Produktionsworkflow ist entscheidend für die wirtschaftliche und standardisierte Textil- und Bekleidungsfertigung. Dies unterstützt Zünd durch vielseitige Automatisierungslösungen, die der Schweizer Gesamtlösungsanbieter für den Textilzuschnitt auf seinem Messestand in Frankfurt vorstellen wird. Sie helfen, die Aufbereitung von Druck- und Schneiddaten zu automatisieren und zu standardisieren, unterstützen bei der Produktionsüberwachung und -analyse, steuern den Zuschnitt und vereinfachen die Entnahme von Schnittteilen und die Logistik.

Die modular aufgebaute Software MindCut Studio enthält alle essenziellen Funktionen für jede Prozessphase der Textil- und Bekleidungsfertigung. Die Software erkennt zuverlässig die Stoffmusterung und Materialverzug, kompensiert diesen und verschachtelt die Schnittteile platz- und materialsparend auf dem Textil. Angesichts steigender Materialkosten ist die maximale Materialausnutzung von zentraler Bedeutung. Die Software bietet flexibel die passsende Variante für den Musterabgleich, unabhängig davon, ob das Textil gestreift, kariert oder digital bedruckt ist.

Für eine effiziente Teileentnahme müssen fertig geschnittene Teile schnell und eindeutig identifizierbar sein. Projizierte Farbcodes und Teileinformationen unterstützen den Bediener beim Absortieren. Und schliesslich wird auch die Teileentnahme mittels Projektion und Monitoranzeige visuell unterstützt.  

Zünd Cutter sind fixer Bestandteil in integrierten Produktionsprozessen. Damit können Bekleidungs- und Möbelhersteller Prozesse automatisieren und gleichzeitig den Datenfluss optimieren. Das Resultat sind deutlich höhere Durchsätze, niedrigere Fehlerquoten und Arbeitskosten, was zu einer deutlich gesteigerten Wettbewerbsfähigkeit beiträgt. Dem Messepublikum stellt Zünd seinen D3 Cutter mit zwei Produktionsbalken vor. Die Balken können jeweils mit bis zu drei verschiedenen Modulen ausgerüstet werden, wodurch sich der Materialdurchsatz massiv erhöht. Die intelligente Cutter-Steuerung verteilt die Aufträge optimal und sorgt so für maximale Produktivität.

Source:

Zünd Systemtechnik AG