From the Sector

Reset
13 results
Trützschler Group auf der Techtextil (c) Trützschler Group SE
13.03.2024

Trützschler Group auf der Techtextil

Vom 23. bis 26. April 2024 zeigt die Trützschler Group auf der Techtextil in Frankfurt am Main die neuesten Entwicklungen für die Herstellung von Vliesstoffen auf Faserbasis. Im Fokus stehen die T-SUPREMA Vernadelungsanlagen und nachhaltige Lösungen für Vliesstoffe aus Zellulosefasern. Auf der Techtextil 2022 wurde die Kooperation zwischen Trützschler Nonwovens und dem italienischen Unternehmen Texnology offiziell bekannt gegeben. Mit der Einweihung der T-SUPREMA Vernadelungsanlage im Technikum in Egelsbach geht Trützschler in diesem Jahr den nächsten Schritt. Im Bereich Textilrecycling stellt Trützschler Spinning mit dem Kooperationspartner Balkan sein aktuelles Portfolio vor.

Vliesstofflösungen
Auf dem Gemeinschaftsstand von Trützschler Nonwovens und dem italienischen Unternehmen Texnology S.l.r. können sich die Besucher über T-SUPREMA informieren. Das Konzept zielt auf hohe Produktqualität und Systemeffizienz im Bereich oder mechanisch vernadelte Vliesstoffe - als Basis für Anwendungen wie Geotextilien, Automobiltextilien, Filtermedien und verschiedene industrielle Anwendungen.

Vom 23. bis 26. April 2024 zeigt die Trützschler Group auf der Techtextil in Frankfurt am Main die neuesten Entwicklungen für die Herstellung von Vliesstoffen auf Faserbasis. Im Fokus stehen die T-SUPREMA Vernadelungsanlagen und nachhaltige Lösungen für Vliesstoffe aus Zellulosefasern. Auf der Techtextil 2022 wurde die Kooperation zwischen Trützschler Nonwovens und dem italienischen Unternehmen Texnology offiziell bekannt gegeben. Mit der Einweihung der T-SUPREMA Vernadelungsanlage im Technikum in Egelsbach geht Trützschler in diesem Jahr den nächsten Schritt. Im Bereich Textilrecycling stellt Trützschler Spinning mit dem Kooperationspartner Balkan sein aktuelles Portfolio vor.

Vliesstofflösungen
Auf dem Gemeinschaftsstand von Trützschler Nonwovens und dem italienischen Unternehmen Texnology S.l.r. können sich die Besucher über T-SUPREMA informieren. Das Konzept zielt auf hohe Produktqualität und Systemeffizienz im Bereich oder mechanisch vernadelte Vliesstoffe - als Basis für Anwendungen wie Geotextilien, Automobiltextilien, Filtermedien und verschiedene industrielle Anwendungen.

Darüber hinaus erhalten die Besucher Einblicke in die digitale Arbeitsumgebung von T-ONE und deren Rolle bei der Sicherstellung einer nachhaltig hohen Vliesstoffqualität und Prozesseffizienz. T-ONE ist ein Bestandteil des T-SUPREMA Anlagenkonzepts, kann aber an jede faser- oder polymerbasierte Vliesstoffanlage angepasst werden.

Auch wird sich Trützschler Nonwovens auf seine Nassvlies-/ Spunlace- (WLS) und Krempel-/ Pulpanlagen (CP) für biologisch abbaubare Vliesstoffe auf Cellulosebasis konzentrieren. In Zusammenarbeit mit Voith treibt Trützschler Nonwovens die Entwicklung innovativer und umweltfreundlicher WLS- und CP-Produkte voran.

Spinnereivorbereitung
Zusammen mit dem türkischen Unternehmen Balkan präsentiert Trützschler Komplettlösungen für das mechanische Recycling und die Spinnereivorbereitung von Textilabfällen. Balkan ergänzt mit seinen Schneid- und Reißanlagen das Produktportfolio von Trützschler.

Die Besucher werden sowohl über die Balkan Reißanlagen als auch über die Putzereianlagen von Trützschler, die neue Integrierte Strecke IDF 3 und die intelligente Karde TC 30Ri für das Recycling, informiert. Das neue Flaggschiff der Karden verwandelt Sekundärfasern aus gerissenen Textilabfälle in hochwertige Faserbänder für neue Garne.

Source:

Trützschler Group SE

08.03.2024

Rieter: Partnership with Shanghai's DIW

On March 6, 2024, Rieter received an order for the first batch of Rieter technology amounting to around CHF 62 million from Shanghai Digital Intelligence World Industrial Technology Group Co., Ltd. (DIW). Rieter also signed a strategic partnership with DIW to develop an intelligent yarn manufacturing technology that utilizes digitization and automation to minimize conversion costs.

On March 6, 2024, Rieter received an order for the first batch of Rieter technology amounting to around CHF 62 million from Shanghai Digital Intelligence World Industrial Technology Group Co., Ltd. (DIW). Rieter also signed a strategic partnership with DIW to develop an intelligent yarn manufacturing technology that utilizes digitization and automation to minimize conversion costs.

Rieter and DIW signed a first order in the amount of around CHF 62 million for combers and draw frames that will provide the basis to transform DIW’s spinning mills into state-of-the-art industrial textile operations. DIW, a fast-growing company specializing in intelligent manufacturing and industrial operation services, selected Rieter following a competition in which the company’s machines achieved better stability and higher production than competitors. The strategic partnership of DIW and Rieter is designed to further enhance the overall operational efficiency of DIW’s mills by providing highly efficient machines, automation and digitization technology. This will also minimize conversion cost and consolidate the sustainable growth of both companies, while contributing to the high-quality development of the Chinese textile industry.

Source:

Rieter Management AG

(c) Oerlikon
16.02.2023

Oerlikon Barmag: Manufacturing high-titer products using the POY and DTY process optimized

  • Longer parking times for greater efficiency

Since 2018, Oerlikon Barmag has been offering the market’s only currently available concept for high-end home textile applications using the POY and DTY process. The spinning concept with the WINGS HD winding unit in conjunction with an automatic eAFK Big V Multispindle texturing machine manufactures high-titer yarns with maximum machine efficiency.
 
“We have correspondingly modified WINGS HD in order to once again better align the increased requirements of these special yarns to the spinning process and make everyday production even simpler for our customers”, comments Stephan Faulstich, POY Process Technology Manager. The parking times are extremely short when winding high titers. We have increased the parking times by up to three times in the case of the new WINGS HD models. To this end, the parking time for a 300d/384f yarn, for example, has been increased from a standard 6.5 min. to 15.7 min. – and, in the case of a 400d/192f yarn, from 4.3 min. to 10.3 min. This makes the doffing process more even, hence increasing doffing reliability.

  • Longer parking times for greater efficiency

Since 2018, Oerlikon Barmag has been offering the market’s only currently available concept for high-end home textile applications using the POY and DTY process. The spinning concept with the WINGS HD winding unit in conjunction with an automatic eAFK Big V Multispindle texturing machine manufactures high-titer yarns with maximum machine efficiency.
 
“We have correspondingly modified WINGS HD in order to once again better align the increased requirements of these special yarns to the spinning process and make everyday production even simpler for our customers”, comments Stephan Faulstich, POY Process Technology Manager. The parking times are extremely short when winding high titers. We have increased the parking times by up to three times in the case of the new WINGS HD models. To this end, the parking time for a 300d/384f yarn, for example, has been increased from a standard 6.5 min. to 15.7 min. – and, in the case of a 400d/192f yarn, from 4.3 min. to 10.3 min. This makes the doffing process more even, hence increasing doffing reliability.

At the same time, the draw unit now has a more flexible design, meaning that two-godet operation is also possible in the case of products with low overall titers. This has a positive impact on the winding unit’s energy consumption.

12 POY packages of up to 600d/576f (final) are produced in the spinning process using WINGS HD 1800. This is made possible as a result of an additional godet, which ensures that the high yarn tensions developing in the process are reduced to the yarn tensions common in the case of the winding process to date. At the same time, the newly-developed suction unit with the accompanying yarn cut-ting device (yarn collecting system) ensures – both during string-up and in the event of a yarn break – reliable handling of the yarn with an overall titer of 7,200 den (final).

Whereas DTY yarns up to 1,200 den and with up to 784 filaments have in the past, as standard, been plied from four POY 300d/192f bobbins using DTY machines, high titers can also be manufactured directly using the WINGS HD take-up machine. Combining the WINGS HD and the eAFK Big V allows all available winding positions to be utilized during texturing.

 

Source:

Oerlikon Textile GmbH & Co. KG

07.04.2022

Rieter Annual General Meeting 2022

  • All motions approved

The Corona Virus also had an impact on the 131st Annual General Meeting of Rieter Holding Ltd., Winterthur, on Thursday, April 7, 2022.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 7, 2022, the independent proxy represented a total of 1 986 shareholders who hold 64.4% of the share capital.

The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 4.00 per share. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2023.

  • All motions approved

The Corona Virus also had an impact on the 131st Annual General Meeting of Rieter Holding Ltd., Winterthur, on Thursday, April 7, 2022.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 7, 2022, the independent proxy represented a total of 1 986 shareholders who hold 64.4% of the share capital.

The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 4.00 per share. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2023.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors Hans-Peter Schwald, Peter Spuhler, Roger Baillod and Carl Illi were confirmed for an additional one-year term of office. Sarah Kreienbühl and Daniel Grieder were newly elected to the Board of Directors for a one-year term of office.

Furthermore, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office. Sarah Kreienbühl was newly elected to the Remuneration Committee and is taking over the chair.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2021, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

More information:
Rieter general meeting Spinnerei
Source:

Rieter Management AG

01.04.2022

Rieter completes acquisition of the three Saurer businesses

With the takeover of the automatic winding machine business at the Uebach-Palenberg/Germany site with effect from April 1, 2022, Rieter has completed the acquisition of the three businesses from Saurer.

The acquisition of the automatic winding technology in the premium category completes Rieter’s ring and compact-spinning system and thus lays the foundation to further improve the company’s position in the staple fiber market segment.

The components businesses Accotex (elastomer technology for spinning machines) at the Muenster/Germany site and Temco (technology components for filament machines) at the Hammelburg/Germany site had already been acquired by Rieter as of December 1, 2021.

Rieter had announced the acquisition of the three businesses on August 16, 2021.

In total, the three businesses generated sales of EUR 142 million in 2020, the year of the COVID crisis. In 2019 and 2018, total sales amounted to EUR 235 million and EUR 260 million, respectively.

With the takeover of the automatic winding machine business at the Uebach-Palenberg/Germany site with effect from April 1, 2022, Rieter has completed the acquisition of the three businesses from Saurer.

The acquisition of the automatic winding technology in the premium category completes Rieter’s ring and compact-spinning system and thus lays the foundation to further improve the company’s position in the staple fiber market segment.

The components businesses Accotex (elastomer technology for spinning machines) at the Muenster/Germany site and Temco (technology components for filament machines) at the Hammelburg/Germany site had already been acquired by Rieter as of December 1, 2021.

Rieter had announced the acquisition of the three businesses on August 16, 2021.

In total, the three businesses generated sales of EUR 142 million in 2020, the year of the COVID crisis. In 2019 and 2018, total sales amounted to EUR 235 million and EUR 260 million, respectively.

The winding machine business with new machines will be assigned to the Business Group Machines & Systems, and the after-sales business will be assigned to the Business Group After Sales. The Accotex and Temco component businesses are managed by the Business Group Components.

Source:

Rieter Management AG

22.10.2021

Rieter Investor Update 2021

  • Order intake of CHF 698.6 million in third quarter 2021
  • Order intake of CHF 1 673.9 million after nine months
  • Acquisition of the three Saurer businesses on schedule
  • Credit lines renewed early
  • Outlook 2021

The positive market dynamics, which Rieter has already reported on several occasions, continued in the third quarter of the current year. Rieter recorded an order intake of CHF 698.6 million in the third quarter of 2021 (2020: CHF 174.4 million).

  • Order intake of CHF 698.6 million in third quarter 2021
  • Order intake of CHF 1 673.9 million after nine months
  • Acquisition of the three Saurer businesses on schedule
  • Credit lines renewed early
  • Outlook 2021

The positive market dynamics, which Rieter has already reported on several occasions, continued in the third quarter of the current year. Rieter recorded an order intake of CHF 698.6 million in the third quarter of 2021 (2020: CHF 174.4 million).

The order intake of CHF 1 673.9 million after nine months corresponds to an increase of 294% compared to the prior year period (2020: CHF 425.1 million).
 
The market development is broadly supported at the global level and is based on a catch-up effect from 2019 and 2020 in combination with a regional shift in demand. Rieter believes that a major reason for this regional shift in demand is the development of costs in China. This is leading to increased investments outside the Chinese market. The orders came primarily from Turkey, Latin America, India, Pakistan and China. Overall, Rieter is benefitting from its innovative product range and the global positioning of the company.

The Business Group Machines & Systems achieved an order intake totaling CHF 1 281.6 million in the first nine months of 2021 (+447%).*

In the first nine months of 2021, the Business Group Components recorded an increase of 95% to CHF 227.0 million, while the Business Group After Sales posted an order intake of CHF 165.3 million, an increase of 123% compared to the prior year period.*

Acquisition of the three Saurer businesses on schedule
The acquisition of the three businesses from Saurer, which Rieter announced on August 16, 2021, is proceeding according to plan. The incoming orders for these businesses are not taken into account in this trading update.
 
Credit lines renewed early
The Rieter Group arranged the early renewal of the existing committed credit lines (five-year term, totaling CHF 250 million).
 
Outlook 2021*
The first nine months of 2021 were characterized by a rapid market recovery combined with a regional shift in demand. Rieter expects the demand for new systems to gradually return to normal in the coming months.  
 
For the full year 2021, Rieter anticipates sales of around CHF 900 million.

* See attached document for more information.

More information:
Rieter spinning Fibers yarn
Source:

Rieter Management AG

12.05.2021

Rieter updates Outlook for First Half Year 2021

  • Order intake of around CHF 300 million received in the month of April 2021
  • Order intake in the first half of 2021 expected to be around CHF 800 million
  • Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

  • Order intake of around CHF 300 million received in the month of April 2021
  • Order intake in the first half of 2021 expected to be around CHF 800 million
  • Start of implementation of the Rieter CAMPUS project in Winterthur

In the month of April 2021, Rieter received orders of around CHF 300 million. The order intake in April was broadly based internationally with the main focus on Turkey, Uzbekistan and India.

In addition to the regional development of the market, Rieter also attributes the business performance to a catch-up effect due to the low propensity to invest in 2019/2020.

As a result, Rieter expects an order intake of around CHF 800 million in the first half of 2021.

As already announced, Rieter anticipates that sales in the first half of 2021 will be below the break-even point. Rieter expects an operating profit for the full year 2021. On July 15, 2021 Rieter will give an updated outlook for 2021 in connection with the semi-annual results, taking into consideration the ongoing challenges resulting from the COVID-19 pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

Source:

Rieter Management AG

15.04.2021

Rieter Annual General Meeting 2021

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The AGM was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 15, 2021, the independent proxy represented a total of 2 084 shareholders who hold 63.6% of the share capital.

The shareholders approved the proposal of the Board of Directors not to distribute a dividend in view of the negative business result. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2022.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The AGM was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 15, 2021, the independent proxy represented a total of 2 084 shareholders who hold 63.6% of the share capital.

The shareholders approved the proposal of the Board of Directors not to distribute a dividend in view of the negative business result. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2022.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office. Stefaan Haspeslagh was newly elected to the Board of Directors for a one-year term of office.

Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2020, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

Outlook Updated
As already communicated at the Results Press Conference on March 9, 2021, Rieter expects the market recovery to continue in 2021. The company expects an order intake exceeding CHF 500 million in the first half of 2021. For the first half of 2021, Rieter still anticipates that sales will be below break-even point. For the full year 2021, Rieter expects an operating profit.

More information:
Rieter spinning machinery spinning
Source:

Rieter Management AG

27.01.2021

Rieter: First Information on the Financial Year 2020

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*


*See attached document for more information.

Source:

Rieter Management AG

04.12.2020

ANDRITZ to acquire Laroche

International technology Group ANDRITZ has signed an agreement with Laroche, based in Cours, France, to acquire LM Industries comprising Laroche SA and Miltec SA, France. ANDRITZ will take over all Laroche entities and their business worldwide. Closing of the transaction, which is subject to approval by the ANDRITZ Supervisory Board, is expected at the beginning of 2021.

International technology Group ANDRITZ has signed an agreement with Laroche, based in Cours, France, to acquire LM Industries comprising Laroche SA and Miltec SA, France. ANDRITZ will take over all Laroche entities and their business worldwide. Closing of the transaction, which is subject to approval by the ANDRITZ Supervisory Board, is expected at the beginning of 2021.

Laroche is a leading supplier of fiber processing technologies such as opening, blending and dosing, airlay web forming, textile waste recycling and decortication of bast fibers. The product portfolio further complements the ANDRITZ Nonwoven product range. ANDRITZ is now able to offer the complete supply and value chain, from the raw material, to opening and blending, web forming, bonding, finishing, drying, and converting. Laroche’s high-performance technologies for opening and blending enhance the ANDRITZ scope of supply for spunlace, needlepunch and wetlaid production lines. Moreover, both companies have agreed to further strengthen the development of their existing technologies for high-speed and high-capacity applications and also to continue pursuing the development of textile recycling processes in order to stay ahead of the changes the industry is facing.

Laroche SA has been developing fiber processing technologies for more than 100 years. With integrated manufacturing, the company supplies lines for a wide range of industries/products: spinning, bedding and furniture, automotive, acoustic and thermal insulation, geotextiles, filtration, wipes, and many more.

Robert Laroche, President of Laroche: “This acquisition is the logical conclusion in view of the successful long-term relationship between ANDRITZ and Laroche. We have been working in close cooperation for more than ten years and are very much looking forward to becoming a member of the ANDRITZ family.”

Andreas Lukas, Senior Vice President and Division Manager, ANDRITZ Nonwoven: “By adding Laroche’s state-of-the-art products and expertise to our existing capabilities, ANDRITZ Nonwoven will further strengthen its market and technology position.”

Source:

ANDRITZ AG

Logo Rieter (c) Rieter
05.11.2020

Strategic Partnership Between Rieter and WW Systems

  • License agreement concluded for promising technology
  • Integration into the digital spinning suite ESSENTIAL
  • Implementation of digital strategy further advanced

The Rieter Group concludes a license agreement with WW Systems on November 5, 2020 and will integrate the Brazilian company's promising product into its digital spinning suite ESSENTIAL. "OptCotton" from WW Systems offers the only software system worldwide that enables an even blend of cotton for the spinning process. With this cooperation, Rieter is taking an important step forward in implementing its digital strategy and offering its customers further added value in yarn production.

  • License agreement concluded for promising technology
  • Integration into the digital spinning suite ESSENTIAL
  • Implementation of digital strategy further advanced

The Rieter Group concludes a license agreement with WW Systems on November 5, 2020 and will integrate the Brazilian company's promising product into its digital spinning suite ESSENTIAL. "OptCotton" from WW Systems offers the only software system worldwide that enables an even blend of cotton for the spinning process. With this cooperation, Rieter is taking an important step forward in implementing its digital strategy and offering its customers further added value in yarn production.

"OptCotton" eliminates variations in quality between cotton blends that are being prepared for the spinning process. In this way, standardized quality yarn can be produced efficiently in the spinning process. From the arrival of the bales in the warehouse to their use in the blowroom line, “OptCotton” manages the entire blending process with no need for categorization. This results in increased efficiency in storage and logistics as well as machine performance.

Integration into the digital spinning suite ESSENTIAL
By integrating this solution, Rieter strengthens its digital spinning suite ESSENTIAL. Access to bale-related fiber data and raw material information opens up new possibilities for controlling the spinning mill. In combination with the existing modules ESSENTIALbasic, ESSENTIALmonitor, ESSENTIALmaintain and ESSENTIALpredict, this optimizes the entire spinning process and raises digital intelligence to a new level.

Source:

Rieter Management AG

(c) Rieter
24.06.2019

Rieter Awarded Large Contract from Egypt

 

  • Contracts signed for seven projects
  • Contract comprises delivery of compact- and ring-spinning systems
  • Total amounts to roughly CHF 180 million
  • Order intakes are anticipated to be realized in 2019; sales posted in the 2020/2021 financial years

Rieter Group has signed contracts with the Cotton & Textile Industries Holding Company, Cairo (Egypt), at the ITMA 2019. These seven projects entail a total of 180 million Swiss francs. The contract comprises delivery of compact- and ring-spinning systems over the next two years. This order is part of a comprehensive modernization program of the Egyptian textile industry. The order intakes are anticipated to be realized in 2019 with sales posted in the 2020/2021 financial years.

The contracts were signed at the ITMA in Barcelona, Spain, by Dr. Ahmed Moustafa Mohamed, Chairman Cotton & Textile Industries Holding Company, and Dr. Norbert Klapper, CEO Rieter.

 

  • Contracts signed for seven projects
  • Contract comprises delivery of compact- and ring-spinning systems
  • Total amounts to roughly CHF 180 million
  • Order intakes are anticipated to be realized in 2019; sales posted in the 2020/2021 financial years

Rieter Group has signed contracts with the Cotton & Textile Industries Holding Company, Cairo (Egypt), at the ITMA 2019. These seven projects entail a total of 180 million Swiss francs. The contract comprises delivery of compact- and ring-spinning systems over the next two years. This order is part of a comprehensive modernization program of the Egyptian textile industry. The order intakes are anticipated to be realized in 2019 with sales posted in the 2020/2021 financial years.

The contracts were signed at the ITMA in Barcelona, Spain, by Dr. Ahmed Moustafa Mohamed, Chairman Cotton & Textile Industries Holding Company, and Dr. Norbert Klapper, CEO Rieter.

Dr. Klapper was very pleased at the formal signing of contracts: “We would like to thank our Egyptian business partners for the confidence they are placing in Rieter by awarding us this contract. Rieter has been the partner of choice of the Egyptian spinning industry for decades. We are delighted to be given the opportunity of making such an important contribution to the modernization of the Egyptian textile industry.”

Source:

Media Relations, Rieter Management AG

(c) Hochschule Reutlingen.
13.05.2019

Hochschule Reutlingen: Unterstützung praxisnaher Ausbildung an der Hochschule

Moderne Vorspinnmaschine der Firma Rieter ab sofort im Maschinenpark der Fakultät Textil & Design
Die Firma Rieter spendete der Fakultät Textil & Design der Hochschule Reutlingen eine automatische Vorspinnmaschine, einen sogenannten Flyer. Rieter ist weltweit führender Anbieter von Systemen für die Kurzstapelfaser-Spinnerei. Das Unternehmen mit Sitz im schweizerischen Winterthur entwickelt und fertigt Maschinen, Systeme und Komponenten für die Verarbeitung von Natur- und synthetischen Fasern sowie deren Mischung zu Garnen.

Moderne Vorspinnmaschine der Firma Rieter ab sofort im Maschinenpark der Fakultät Textil & Design
Die Firma Rieter spendete der Fakultät Textil & Design der Hochschule Reutlingen eine automatische Vorspinnmaschine, einen sogenannten Flyer. Rieter ist weltweit führender Anbieter von Systemen für die Kurzstapelfaser-Spinnerei. Das Unternehmen mit Sitz im schweizerischen Winterthur entwickelt und fertigt Maschinen, Systeme und Komponenten für die Verarbeitung von Natur- und synthetischen Fasern sowie deren Mischung zu Garnen.

Die gespendete Maschine ist eine tolle Ergänzung des weltweit einzigartigen Maschinenparks der Fakultät Textil & Design im Bereich der textilen Lehre. Der Flyer ermöglicht im Praxisunterricht die Demonstration der Erstellung des Vorgarns für die Ringspinnmaschine. Das Streckenband wird verfeinert, eine Schutzdrehung zur Vermeidung von Fehlzügen wird aufgebracht und das Faserband wird auf eine Spule aufgewunden. Die neue vollautomatische Maschine ersetzt ein älteres Modell und stellt so eine praxisnahe Ausbildung der Studierenden an state-of-the-Art Maschinen sicher. „Auf diese praxisnahe Ausbildung sind wir sehr stolz“ untermauerte Prof. Michael Goretzky, Dekan der Fakultät Textil & Design in seiner Begrüßung und seinen Dankesworten.

Die großzügige Spende ist ein Meilenstein in der langjährigen Beziehung zwischen der Fakultät Textil & Design und der Firma Rieter, die sich kontinuierlich für die Ausbildung der Textil-Studierenden an Textilmaschinen engagiert.

In einer Feierstunde wurde im Beisein der Repräsentanten der Firma Rieter und der Hochschule Reutlingen der Dank für diese Spende zum Ausdruck gebracht. Harald Schwippl, Head of Technology & Process Analytics, gab in einem spannenden Vortrag vergleichende Einblicke in die vier Kurzstapelendspinnverfahren aus wirtschaftlicher und technologischer Sicht. Rieter ist der einzige Anbieter weltweit, der Prozesse für die Spinnereivorbereitung und sämtliche vier am Markt etablierten Endspinnverfahren abdeckt. Bei einer Live-Demonstration konnten sich die anwesenden Studierenden und Repräsentanten schließlich von der enormen Leistungskraft der modernen Maschine überzeugen und sich beim anschließenden Get-Together über die gewonnenen Eindrücke austauschen.

Source:

Hochschule Reutlingen.