From the Sector

Reset
241 results
Composite car seat back (c) NaCa Systems
Composite car seat back
05.02.2020

Hexcel and NaCa Systems develop hybrid carbon and wood fiber

Hexcel is collaborating with NaCa Systems, a Tier 1 supplier of natural fiber composite automotive interior parts, on the development of a lightweight carbon fiber prepreg and wood fiber composite sportscar seat back using a rapid press molding process. This innovation validates a short cycle time production process for CFRP and wood fiber composite parts and offers a host of benefits to automotive manufacturers.

Hexcel supplies NaCa Systems with an optimized version of its HexPly® M77CS epoxy prepreg material. HexPly® M77CS is a fast curing hotmelt, thermosetting epoxy matrix, specifically designed for prepreg applications for which short cure cycles and clear surfaces with perfect aesthetics are required.

The lightweight seat back demonstrates a 40% weight saving compared to a typical injection molded plastic component whilst also featuring a significantly improved CO2 footprint vs a full carbon part. The prepreg and wood fiber structure doesn’t produce sharp edged pieces when damaged. In addition, wood fiber composites also increase sound absorption, contributing to improved NVH damping within the vehicle interior.

Hexcel is collaborating with NaCa Systems, a Tier 1 supplier of natural fiber composite automotive interior parts, on the development of a lightweight carbon fiber prepreg and wood fiber composite sportscar seat back using a rapid press molding process. This innovation validates a short cycle time production process for CFRP and wood fiber composite parts and offers a host of benefits to automotive manufacturers.

Hexcel supplies NaCa Systems with an optimized version of its HexPly® M77CS epoxy prepreg material. HexPly® M77CS is a fast curing hotmelt, thermosetting epoxy matrix, specifically designed for prepreg applications for which short cure cycles and clear surfaces with perfect aesthetics are required.

The lightweight seat back demonstrates a 40% weight saving compared to a typical injection molded plastic component whilst also featuring a significantly improved CO2 footprint vs a full carbon part. The prepreg and wood fiber structure doesn’t produce sharp edged pieces when damaged. In addition, wood fiber composites also increase sound absorption, contributing to improved NVH damping within the vehicle interior.

The NaCa Systems seat back will be on display on the Hexcel stand at JEC World 2020.

More information:
Hexel NaCa
Source:

100percentmarketing 

(c) Sicomin
03.02.2020

Sicomin’s InfuGreen 810 Provides Uncompromising Performance

Sicomin has partnered with GREENBOATS® on the supply of GreenPoxy® bio-based resins for the FLAX 27 - the most complete natural fibre composite project realised by GREENBOATS® to date. Sicomin’s hand lamination and infusion production processes have been optimized for natural fibre composites, providing an uncompromising performance.

GREENBOATS® has been producing innovative natural fibre composites at their Bremen facility for more than a decade, expertly crafting a range of marine and industrial products with a mission to use 100% renewable and sustainable raw materials in sandwich composite structures.  

The FLAX 27 is an 8.2m classically styled daysailer designed by renowned naval architects Judel/Vrolijk & Co. The hull, deck and internal structure of the vessel were infused with Sicomin’s very low viscosity GreenPoxy® InfuGreen 810 resin and flax fibre reinforcement fabrics.  

Sicomin has partnered with GREENBOATS® on the supply of GreenPoxy® bio-based resins for the FLAX 27 - the most complete natural fibre composite project realised by GREENBOATS® to date. Sicomin’s hand lamination and infusion production processes have been optimized for natural fibre composites, providing an uncompromising performance.

GREENBOATS® has been producing innovative natural fibre composites at their Bremen facility for more than a decade, expertly crafting a range of marine and industrial products with a mission to use 100% renewable and sustainable raw materials in sandwich composite structures.  

The FLAX 27 is an 8.2m classically styled daysailer designed by renowned naval architects Judel/Vrolijk & Co. The hull, deck and internal structure of the vessel were infused with Sicomin’s very low viscosity GreenPoxy® InfuGreen 810 resin and flax fibre reinforcement fabrics.  

Vacuum infusion with Sicomin’s InfuGreen 810, produced crystal-clear natural fibre laminates with outstanding mechanical properties, whilst the closed mould process also improved working conditions in the factory. Available with a choice of hardeners to adjust the curing time as required, InfuGreen 810 also carries DNV-GL approval, providing a reassuring 3rd party confirmation of the product’s exceptional quality, performance and consistency.
GREENBOATS® typically apply a bespoke lifecycle assessment tool to optimize their projects for performance as well as sustainability. This detailed view of a project’s environmental impact and GREENBOATS® expertise in product development has now created a number of larger scale composite applications for bio-based resins.

Sicomin are looking forward to continuing to work alongside GREENBOATS® in 2020, with industrial production capacity for their market leading range of GreenPoxy® bio-based epoxies positioning the company to support the forecasted large scale growth in the natural fibre composite market.

“Our goal is to really get people excited about Natural Fibre Composites. Sicomin’s GreenPoxy® products help us create sustainable composites with no compromise in performance or appearance.” commented GREENBOATS® founder Friedrich Johann Deimann.

The GREENBOATS® FLAX 27 will be on display on the JEC planets at JEC World 2020 Paris from 3 to 5 March 2020.
 

More information:
Sicomin
Source:

100percentmarketing

(c) MECELEC COMPOSITES
03.02.2020

MECELEC COMPOSITES designs Flax fibre roofs for 550 Morris columns

At JEC World 2020, MECELEC COMPOSITES is a finalist of the JEC Innovation Awards in the Design & Furniture category. The Group announces the launch of a new sustainable development application on the urban design market. MECELEC COMPOSITES designed the first mass-produced flax fibre roofs for the 550 Morris columns installed by JCDecaux in Paris. “This is the first application of flax fibre BMC for mass production. The new solution combines all the advantages of composite materials, lightness and strength, with stringent environmental requirements and is adapted to the safety constraints of this kind of street furniture,” says Bénédicte Durand, Chief Executive Officer at MECELEC COMPOSITES.

At JEC World 2020, MECELEC COMPOSITES is a finalist of the JEC Innovation Awards in the Design & Furniture category. The Group announces the launch of a new sustainable development application on the urban design market. MECELEC COMPOSITES designed the first mass-produced flax fibre roofs for the 550 Morris columns installed by JCDecaux in Paris. “This is the first application of flax fibre BMC for mass production. The new solution combines all the advantages of composite materials, lightness and strength, with stringent environmental requirements and is adapted to the safety constraints of this kind of street furniture,” says Bénédicte Durand, Chief Executive Officer at MECELEC COMPOSITES.

A COMPOSITE ROOF THAT IS BOTH INNOVATIVE AND GREEN
The dome of the Morris columns is composed of 23 different parts, 14 of which are made from composite materials. To design the roof, MECELEC COMPOSITES developed a new RTM complex and a new BMC material, that is reinforced exclusively with a flax mat. “Today it is the only BMC with a 100% flax fibre reinforcement, which uses a partially recycled ABS resin. It was created specifically for this project and we had to work on the processes in order to adapt them to this new material,” explains Bertrand Vieille, Head of sales.
In the design, MECELEC COMPOSITES replaced the bonding process with a time-saving mechanical assembly process using an invisible fixing system.

AN ECO-FRIENDLY APPLICATION IN LINE WITH THE GROUP’S ECO-DESIGN CSR APPROACH
MECELEC COMPOSITES creates scalable, sustainable and environmentally-friendly street furniture. The Group is committed to developing a sustainable production process and reuses all its waste materials. MECELEC COMPOSITES R&D laboratory promotes eco-design with a process of characterisation and mechanical sizing of parts. “For this project, we imagined, created, produced and delivered a mass-produced composite application with a low environmental impact within less than a year. At the end of its lifecycle, the product completely breaks down, leaving no fibre residue,” Bénédicte Durand concludes.

More information:
fiber-reinforced composites
Source:

AGENCE APOCOPE

(c) AZL Aachen GmbH
28.01.2020

AZL and IKV launch common project

In the AZL Workgroup "High-Performance SMC", a project was developed in cooperation with M-Base, the IKV and the AZL partner network for the efficient and standardized provision of engineering data for SMC. Within the scope of the project, companies can participate in the definition of the required characteristic material data, the guidelines for the production of test specimens and the test specifications.
Sheet Moulding Compounds (SMC) are used in various application areas such as vehicles, electronics, construction and infrastructure.

In the AZL Workgroup "High-Performance SMC", a project was developed in cooperation with M-Base, the IKV and the AZL partner network for the efficient and standardized provision of engineering data for SMC. Within the scope of the project, companies can participate in the definition of the required characteristic material data, the guidelines for the production of test specimens and the test specifications.
Sheet Moulding Compounds (SMC) are used in various application areas such as vehicles, electronics, construction and infrastructure.

Driven by the requirements to reduce the production costs of lightweight components, a new generation of SMC components with high mechanical properties is of highest relevance. SMC offers enormous potential to realize structural components with good lightweight characteristics at significantly reduced costs compared to conventional continuous fiber-reinforced components.
In order to further establish SMC in broad industrial applications companies participating within the AZL Workgroup recognized the value of a data bank for data harmonization of SMC to provide the possibility of easily finding the right material with its characteristics for the needed specific requirements.

“The segment of SMC is with 250,000 tons production per year the largest composites market in Europe. I am very pleased that we start now with the project of data harmonization along the complete value chain. The goal is to have a similar data base as already established by Campus® for thermoplastics and thermoplastic composites. Only with a reliable set data we can convince the engineering experts to use SMC in a larger variety of applications,” says Dr. Michael Effing, Chairman of the Board of AVK and Composites Germany.

As of right now a databank for engineered thermoplastic materials (by Campus®) already exists and is offering an immense value.
Under the lead of M-Base, Dr. CEO Erwin Baur who has successfully established the CAMPUS database, the AZL, IKV and companies along the value chain of long fibre reinforced SMC initiated to build a CAMPUS-compatible data structure and material characterization methodology during the High-Performance SMC Workgroup Meetings.

Ultra-light landing gear made of carbon fiber composites for air taxis (c) SGL Carbon
Ultra-light landing gear made of carbon fiber composites for air taxis
20.01.2020

SGL Carbon: Ultra-light landing gear made of carbon fiber composites for air taxis

  • Series order for a total of 500 units
  • First SGL Carbon component project for manned autonomous aviation

SGL Carbon will begin serial production of landing gear made from braided carbon fiber material early this year. The landing skids will be installed in around 500 air taxis worldwide over the next two years.

The air taxis will be powered by several electric motors. To optimize the range of the taxis, every single gram counts. Measuring about two meters in length and 1.5 meters in width, the ultra-light landing skid will weigh less than three kilograms, making it about 15 percent lighter than a similar component made from aluminum. This increases the potential flight time capacity of the air taxi which is a key differentiator for the air taxi operator.

  • Series order for a total of 500 units
  • First SGL Carbon component project for manned autonomous aviation

SGL Carbon will begin serial production of landing gear made from braided carbon fiber material early this year. The landing skids will be installed in around 500 air taxis worldwide over the next two years.

The air taxis will be powered by several electric motors. To optimize the range of the taxis, every single gram counts. Measuring about two meters in length and 1.5 meters in width, the ultra-light landing skid will weigh less than three kilograms, making it about 15 percent lighter than a similar component made from aluminum. This increases the potential flight time capacity of the air taxi which is a key differentiator for the air taxi operator.

“With with our landing gear we help to shape this very new, promising application of manned, autonomous civil aviation. This involvement also demonstrates our wide range of services. From engineering, to prototype manufacture, to serial production with our own materials – all of our competences along the entire value chain made a contribution to the project ,” emphasizes Dr. Andreas Erber, Head of the Aerospace segment of the Composites – Fibers & Materials business unit at SGL Carbon.

The landing gear was developed in close collaboration between customer experts and specialists from SGL Carbon. The carbon fibers for the component are produced at the SGL Carbon plant in Muir of Ord, Scotland. The final part is being manufactured at the SGL Carbon site in Innkreis, Austria.

 

More information:
SGL Carbon
Source:

SGL Carbon

SGL Carbon und Solvay schließen Kooperation zur Entwicklung von im hohen Maße konkurrenzfähigen und fortschrittlichen Carbonfaser-Verbundwerkstoffen für Primärstrukturen in der Luftfahrt (c) SGL CARBON SE
SGL Carbon Large-Tow-IM-Carbonfaser Produktion am US-Standort Moses Lake
03.12.2019

Collaboration between SGL Carbon and Solvay

SGL Carbon and Solvay collaborate to develop highly-competitive advanced carbon fiber composites for aerospace primary structures

SGL Carbon and Solvay have entered into a joint development agreement (JDA) to bring to market the first composite materials based on large-tow intermediate modulus (IM) carbon fiber. These materials, which address the need to reduce costs and CO2 emissions, and improve the production process and fuel efficiency of next-generation commercial aircraft, will be based on SGL Carbon’s large-tow IM carbon fiber and Solvay’s primary structure resin systems.

The agreement encompasses both thermoset and thermoplastic composite technologies. It builds on Solvay’s leadership in supplying advanced materials to the aerospace industry and SGL Carbon’s expertise in high-volume carbon fiber manufacturing.

SGL Carbon and Solvay collaborate to develop highly-competitive advanced carbon fiber composites for aerospace primary structures

SGL Carbon and Solvay have entered into a joint development agreement (JDA) to bring to market the first composite materials based on large-tow intermediate modulus (IM) carbon fiber. These materials, which address the need to reduce costs and CO2 emissions, and improve the production process and fuel efficiency of next-generation commercial aircraft, will be based on SGL Carbon’s large-tow IM carbon fiber and Solvay’s primary structure resin systems.

The agreement encompasses both thermoset and thermoplastic composite technologies. It builds on Solvay’s leadership in supplying advanced materials to the aerospace industry and SGL Carbon’s expertise in high-volume carbon fiber manufacturing.

“For Solvay, this is an opportunity to lead the aerospace adoption of a composite material based on 50K IM carbon fiber. This is a highly competitive value proposition that brings more affordable high-performance solutions to our customers. We see this as the first step in a long-term partnership,” said Augusto Di Donfrancesco, member of Solvay’s executive committee.

“By combining SGL’s carbon fiber expertise in our newly developed, unique 50K IM fiber with Solvay’s resin formulation and aerospace market expertise, both partners are aiming to develop an advanced aerospace material system. This alliance supports our strategic direction and accelerates our growth in the attractive aerospace market,” said Dr. Michael Majerus, spokesman of the management board of SGL Carbon.

Composite materials for aerospace applications represent a multi-billion-dollar market that is expected to grow strongly in the coming decade. Solvay and SGL Carbon are uniquely positioned to develop solutions to address the needs of this market.

More information:
Solvay SGL Carbon Carbonfaser
Source:

SGL CARBON SE

(c) Eric RAZ, Airbus Helicopters
25.11.2019

SGL Carbon serially delivers composite materials for rotor blades to Airbus Helicopters

  • Glass fiber textiles for helicopter type H145
  • First ever material supply for primary structural components in the aerospace segment

Since August of this year, SGL Carbon delivers two special glass fiber textiles, so-called non-crimped fabrics, for the new version of helicopter model H145 from Airbus Helicopters. These materials are used in the new, especially efficient five-blade rotor. Developed in close collaboration with Airbus Helicopters, the material has been qualified for the application for the next years to come.  

Thanks to their unidirectional fiber orientation, the fabrics are extremely resistant, providing optimal support for the new geometry of the especially long H145 rotor blades. The fabrics are manufactured at the SGL Carbon site in Willich near Düsseldorf in a multi-stage process and delivered to Airbus Helicopters in Paris.  

  • Glass fiber textiles for helicopter type H145
  • First ever material supply for primary structural components in the aerospace segment

Since August of this year, SGL Carbon delivers two special glass fiber textiles, so-called non-crimped fabrics, for the new version of helicopter model H145 from Airbus Helicopters. These materials are used in the new, especially efficient five-blade rotor. Developed in close collaboration with Airbus Helicopters, the material has been qualified for the application for the next years to come.  

Thanks to their unidirectional fiber orientation, the fabrics are extremely resistant, providing optimal support for the new geometry of the especially long H145 rotor blades. The fabrics are manufactured at the SGL Carbon site in Willich near Düsseldorf in a multi-stage process and delivered to Airbus Helicopters in Paris.  

“The order emphasizes our growing presence in the aerospace business. With the fabrics for Airbus Helicopters, we have realized, qualified, and started serial production for a material concept for primary structural components for the first time,” underscores Dr. Andreas Erber, Head of the Aerospace segment in the business unit Composites – Fibers & Materials at SGL Carbon.

The current deliveries are part of a framework contract with Airbus Helicopters, intended to gradually intensify collaboration. Besides the current development of materials for helicopter components, Airbus Helicopters and SGL Carbon have worked together in the area of component material processing for Airbus group aircraft doors for years. In addition, Airbus and SGL Carbon are jointly involved in various associations and research projects in the area of components, such as Carbon Composites e.V.

 

More information:
SGL Carbon
Source:

SGL CARBON SE

(c) JEC Group
21.11.2019

JEC Asia has closed its doors

JEC ASIA 2019 REFLECTED THE DYNAMISM OF THE COMPOSITES INDUSTRY IN ASIA PACIFIC

JEC ASIA 2019 KEY FIGURES

  • 6,600+ professional visits
  • 200+ exhibiting companies from 49 countries
  • 3 conference sessions and composite tours
  • 40+ International speakers
  • 550 business meetings
  • 40+ innovative parts in the Planet
  • 10 Innovation awards
  • 3 startups rewarded

After three days of demonstrating the bright future ahead of composites, JEC Asia 2019 welcomed more than 200 exhibitors showcasing the latest innovations to more than 6,600 attendees from 49 countries in Seoul. From global brands to visionary startups, these companies set the composite world abuzz with the promise of innovation, knowledge, and networking.

Once again, JEC Asia gathered a significant number of academic researchers and institutions, industrials in a spirit of innovation, to prove that the sector is rapidly growing. But this year, the Korean composites Golden Triangle has shown even more dynamism and a very strong ambition to become a leading country in composites.

JEC ASIA 2019 REFLECTED THE DYNAMISM OF THE COMPOSITES INDUSTRY IN ASIA PACIFIC

JEC ASIA 2019 KEY FIGURES

  • 6,600+ professional visits
  • 200+ exhibiting companies from 49 countries
  • 3 conference sessions and composite tours
  • 40+ International speakers
  • 550 business meetings
  • 40+ innovative parts in the Planet
  • 10 Innovation awards
  • 3 startups rewarded

After three days of demonstrating the bright future ahead of composites, JEC Asia 2019 welcomed more than 200 exhibitors showcasing the latest innovations to more than 6,600 attendees from 49 countries in Seoul. From global brands to visionary startups, these companies set the composite world abuzz with the promise of innovation, knowledge, and networking.

Once again, JEC Asia gathered a significant number of academic researchers and institutions, industrials in a spirit of innovation, to prove that the sector is rapidly growing. But this year, the Korean composites Golden Triangle has shown even more dynamism and a very strong ambition to become a leading country in composites.

More information:
JEC 2019 JEC Group
Source:

JEC Group

Monforts at Techtextil India (c) Monforts
A recent Monforts texCoat installation.
20.11.2019

Monforts at Techtextil India

Monforts Textilmaschinen GmbH & Co. KG will be providing information on its extensive range of coating and finishing technologies for the production of nonwovens and technical textiles at the forthcoming Techtextil India exhibition.

“India is already a very important market for Monforts and there are exciting prospects ahead for Indian manufacturers of technical textiles, who are well positioned to capitalise on growth opportunities,” says Monforts Head of Denim Hans Wroblowski, who will be at the Monforts stand in Hall 4, booth C52 at the show. “India has one of the largest working-age populations in the world and a complete textile value chain for both natural and synthetic fibres.”

In addition, he adds, India’s government, through its Ministry of Textiles, has been actively promoting the growth of technical textiles through various programmes based on investment promotion, subsidies, the creation of infrastructure and the stimulation of consumption.

Monforts Textilmaschinen GmbH & Co. KG will be providing information on its extensive range of coating and finishing technologies for the production of nonwovens and technical textiles at the forthcoming Techtextil India exhibition.

“India is already a very important market for Monforts and there are exciting prospects ahead for Indian manufacturers of technical textiles, who are well positioned to capitalise on growth opportunities,” says Monforts Head of Denim Hans Wroblowski, who will be at the Monforts stand in Hall 4, booth C52 at the show. “India has one of the largest working-age populations in the world and a complete textile value chain for both natural and synthetic fibres.”

In addition, he adds, India’s government, through its Ministry of Textiles, has been actively promoting the growth of technical textiles through various programmes based on investment promotion, subsidies, the creation of infrastructure and the stimulation of consumption.

As a result, India’s Ministry of Textiles is forecasting that the growth of technical textiles in the country will be over 18% annually in the next few years, from a value of US$16.6 billion in 2018 to US$28.7 billion in 2021.

Value addition

High value-added technical products such as wide-width digital printing substrates, carbon fabrics for high-performance composites, filter media, flame retardant barrier fabrics and heavy-duty membranes are now being coated on Monforts texCoat ranges and finished with the company’s industry-leading Montex stenters.

“Since we acquired the technology that our coating units are based on in 2015, we have made a lot of refinements,” says Hans. “All of these developments are reflected in higher coating accuracy and the resulting quality of the treated fabrics. At the same time, our latest multi-functional coating heads offer an unprecedented range of options, with a wide range of modules available.”

The texCoat user interface is now equipped with the unique Monforts visualisation system and the magnetic doctor blade has greater power reserves. Options include a carbon fibre-reinforced composite coating drum with a more scratch-resistant surface and maximum rigidity and remote control which simplifies exact adjustment for the operator.

Montex stenters in special executions are meanwhile ideal for the drying and finishing of both technical woven fabrics and nonwovens and characterised by high stretching devices in both length and width.

“The European-built Montex range of stenters has earned its leading position in the technical textiles market due to the overall robustness, reliability and economy of these machines,” Hans concludes. “Whatever the intended end-product – and we continue to discover potentially new areas in which technical textiles can be utilised all the time – we have the machine specification and know-how to turn ideas into reality. In India we also benefit from the strong sales and service support of A.T.E. Enterprises.”

Texchtextil India takes place alongside World of Composites at the Bombay Exhibition Centre in Mumbai from November 20-22.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG by AWOL Media.

(c) JEC group
14.11.2019

JEC Asia 2019: Winners of The JEC Innovation Awards Revealed

The JEC innovation awards is a long-established and worldwide program with three simple goals: identify, promote, and reward the most innovative composite solutions in the world. Over the past 15 years, the JEC Innovation Program has involved 1,800 companies worldwide; 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality, or commercial applications of innovations.

« Every year, JEC rewards the best cutting-edge and ingenious projects using composites to their full potential in different categories. The JEC Innovation Awards program is emblematic and recognizes pioneers in composite innovation continuously reinventing the composites of tomorrow», says Franck GLOWACZ, Innovation Content Leader at JEC Group.

The winners have been rewarded for their innovative solutions, in 10 categories:

The JEC innovation awards is a long-established and worldwide program with three simple goals: identify, promote, and reward the most innovative composite solutions in the world. Over the past 15 years, the JEC Innovation Program has involved 1,800 companies worldwide; 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality, or commercial applications of innovations.

« Every year, JEC rewards the best cutting-edge and ingenious projects using composites to their full potential in different categories. The JEC Innovation Awards program is emblematic and recognizes pioneers in composite innovation continuously reinventing the composites of tomorrow», says Franck GLOWACZ, Innovation Content Leader at JEC Group.

The winners have been rewarded for their innovative solutions, in 10 categories:

  • Aerospace
  • Automotive - Exterior
  • Automotive - Structural
  • Electrical, Electronics & Appliances
  • Industrial Equipment
  • Marine
  • Railway
  • Renewable Energy
  • Smart Composites
  • Sports & Leisure

The awards ceremony took place place on November 14, 2019, at 5:30 pm at the Startup Branch, COEX. Ben Bassat, President and CEO of Plataine Avner opened the ceremony with a keynote about “The 4th industrial revolution: implementing IIOT and AI to composite materials and manufacturing”.

07.11.2019

JEC ASIA 2019

JEC Asia 2019 will open its doors in six days within a very positive and dynamic environment for the Composites industry. The South Korean government has decided to develop a whole Composites ecosystem. That goal will be achieved thanks to three strategic pillars: increasing R&D investment in the composites sector for equipment and machines; diversifying its materials and intermediate product providers; reinforcing excellence in research and development with major academic institutions such as Hanyang University and UNIST. Therefore, JEC Asia is a must-attend event for foreign companies to meet with this whole ecosystem.

JEC Asia 2019 will open its doors in six days within a very positive and dynamic environment for the Composites industry. The South Korean government has decided to develop a whole Composites ecosystem. That goal will be achieved thanks to three strategic pillars: increasing R&D investment in the composites sector for equipment and machines; diversifying its materials and intermediate product providers; reinforcing excellence in research and development with major academic institutions such as Hanyang University and UNIST. Therefore, JEC Asia is a must-attend event for foreign companies to meet with this whole ecosystem.

More than 200 companies from 49 countries will attend this new edition for three days of Composites Innovation, Business, and Networking. For its 12th edition, JEC Asia 2019 will gather companies from the entire composites value chain in Asia Pacific and specifically from South Korea. They will present their latest capabilities and innovations to the composite’s community and the strategic end-user’s market. Companies like Toray Advanced Materials, Hyosung, Kolon, Hanwha Q Cells & Advanced Materials, Hankuk Carbon, Arkema Korea, and Samyang Corp. are amongst the participants, to name a few.

“The Composites Industry in Asia Pacific is dynamic and largely contributes to the global growth of the Industry. JEC Asia is the major composites platform in the region, where the full value chain gathers from raw material producers, intermediate and final processors. It also encompasses the downstream of the value chain, the original equipment manufacturers (OEM), and end-users. For its 12th edition, JEC Asia will showcase numerous features: an extensive conference program that includes the ICF (International Carbon Festival co-organized with the KCTech), composites tours and the coveted JEC Innovation Awards etc. All these have been crafted to provide the composites industry with targeted networking opportunities and an unrivaled event to develop and share knowledge on composite materials”, says Christian STRASSBURGER, Events Director APAC.

Source:

JEC Group

05.11.2019

SGL Carbon increases group sales; recurring EBIT on the level of the prior year

  • Group sales increases by approximately 6 percent compared to the prior year period to 832 million euros due to organic growth in the market segments Digitization, Energy and Chemicals
  • Group recurring EBIT at around 54 million euros; adjusted for a positive one-time effect in the prior year approximately on the comparable level of the prior year
  • Business unit Composites – Fibers & Materials (CFM) deteriorated substantially in the third quarter 2019 due to the weak development in the market segments Textile Fibers, Wind Energy and Industrial Applications; Graphite Materials & Systems (GMS) developed better than expected on the very good level of the prior quarter reaching overall a record high level in 9M/2019
  • Free cash flow from continuing operations improved significantly in the first nine months
  • Impairment testing triggers a non-cash impairment charge of approximately 75 million euros in CFM in the third quarter
  • Revised guidance of October 25, 2019: Recurring EBIT at CFM in a negative mid-to-high single digit million euros amount and on Group level at 45 to 50 million euros
  • Countermeasures initiated to i
  • Group sales increases by approximately 6 percent compared to the prior year period to 832 million euros due to organic growth in the market segments Digitization, Energy and Chemicals
  • Group recurring EBIT at around 54 million euros; adjusted for a positive one-time effect in the prior year approximately on the comparable level of the prior year
  • Business unit Composites – Fibers & Materials (CFM) deteriorated substantially in the third quarter 2019 due to the weak development in the market segments Textile Fibers, Wind Energy and Industrial Applications; Graphite Materials & Systems (GMS) developed better than expected on the very good level of the prior quarter reaching overall a record high level in 9M/2019
  • Free cash flow from continuing operations improved significantly in the first nine months
  • Impairment testing triggers a non-cash impairment charge of approximately 75 million euros in CFM in the third quarter
  • Revised guidance of October 25, 2019: Recurring EBIT at CFM in a negative mid-to-high single digit million euros amount and on Group level at 45 to 50 million euros
  • Countermeasures initiated to improve earnings of CFM
  • Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: ”The structural growth drivers remain intact in our strategically relevant markets. The countermeasures to improve earnings of CFM will be implemented consistently.”

In the third quarter 2019, the business units of SGL Carbon developed very differently. While Graphite Materials & Systems (GMS) showed better than expected results, Composites – Fibers & Materials (CFM) deteriorated compared to the two previous quarters. This is attributable to the weaker development in the market segments Textile Fibers and Industrial Applications. In total, sales revenue in the first nine months 2019 grew by approximately 6 percent to reach 832 million euros. Recurring Group EBIT after nine months reached approximately 54 million euros. Adjusted for a positive one-time effect in the prior year, this was comparable to the prior year level.

In its ad-hoc notification of October 25, 2019, the company revised its guidance for recurring EBIT of CFM downwards to a negative mid to high single digit million euro amount. On the Group level the company now expects a recurring EBIT at 45 to 50 million euros. Due to the lower starting point in 2019 as well as the ongoing weakness in the market segments Textile Fibers and Industrial Applications in the business unit CFM a non-cash impairment charge in the amount of approximately 75 million euros was recorded in the third quarter 2019. In recent years acquired assets of the former joint ventures with BMW and Benteler were not affected by this impairment. In addition, the impairment charge of CFM led to a valuation allowance on deferred tax assets in the amount of 7.4 million euros. Against this background, SGL Carbon now expects a net result of approximately minus 100 million euros for fiscal year 2019.

More information:
SGL Carbon
Source:

SGL Carbon

Airborne / AMAC GmbH (c) AMAC GmbH
28.10.2019

Airborne strengthens its activities in the D-A-CH region with AMAC

As of October 1st, 2019, the Netherlands-based global market leading manufacturer of advanced automation equipment and solutions for composites, Airborne, strengthens its activities particularly in German speaking countries, the so-called D-A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC. The Dutch company is looking for specialised partnerships to develop and deepen its international business opportunities in the aerospace and automotive markets.

As of October 1st, 2019, the Netherlands-based global market leading manufacturer of advanced automation equipment and solutions for composites, Airborne, strengthens its activities particularly in German speaking countries, the so-called D-A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC. The Dutch company is looking for specialised partnerships to develop and deepen its international business opportunities in the aerospace and automotive markets.

Airborne’s focus is on high-end composite components, at high production rates at radically low conversion costs. Airborne is building up a suite of automated solutions for the manufacturing of composites with the aim to radically reduce costs and touch labour, minimize the footprint and use of material, and improve the time to market for their clients. The company offers i.a. solutions in automated honeycomb potting, automated kitting and automated lamination of thermosets and thermoplastics. In order to develop new business opportunities in the D-A-CH region for the end-markets aerospace and automotive, Airborne is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Dr. Effing, CEO of AMAC GmbH confirms: "As a first step for the establishment of Airborne on the German market, we just signed their membership at AZL in Aachen which will help to connect with over 80 companies and latest research developments. In the framework of theirstrategy to strengthen the supply to the aircraft sector, Airborne will also exhibit at the Aircraft Interiors Expo in Hamburg from March 31st to April 2nd 2020.”

 

25.10.2019

SGC Carbon SE: Update on the preliminary status of the new five-year plan;

Deterioration in market segments Textile Fibers and Industrial Applications in the business unit CFM will be counteracted with various measures; strategic growth markets remain intact

Deterioration in market segments Textile Fibers and Industrial Applications in the business unit CFM will be counteracted with various measures; strategic growth markets remain intact

  • Continued weakness in the business unit Composites – Fibers & Materials (CFM) in the final quarter of 2019 due to the further weakening in the market segment Textile Fibers as well as the deteriorated economic environment in the market segment Industrial Applications leads to a guidance adjustment for the full year 2019
  • Earnings deterioration at CFM triggers an impairment testing; impairment charge will become necessary
  • Initial outlook for 2020
  • Comprehensive measures initiated to improve earnings of the CFM business unit
  • CFM strategic growth markets automotive and aerospace remain intact
  • Growth in higher-margin aerospace business to be accelerated

While the preliminary results for the first nine months 2019 remain, overall, within the scope of the full year outlook outlined in the ad-hoc notification of August 14, 2019 (preliminary 9M/2019 recurring EBIT: Group: approx. €54 million, CFM: approx. minus €2 million, GMS: approx. €71 million, Corporate: approx. minus €15 million), continued weakness is becoming apparent for the final quarter 2019 in the reporting segment Composites – Fibers & Materials (CFM). This is due to the further weakening in the market segment Textile Fibers as well as the deteriorated economic environment in the market segment Industrial Applications.

SGL Carbon therefore now expects for the full year 2019 a recurring EBIT in the reporting segment CFM in a negative mid to high single digit million € amount (previous guidance: positive mid-single digit million € amount). This results in a Group recurring EBIT for the full year 2019 in the magnitude of €45 to 50 million (previous guidance: approx. €55 million).

The earnings deterioration at CFM triggers an impairment testing. Based on the preliminary status of the new five-year plan, a non-cash impairment charge of €70 to 80 million is becoming apparent in CFM mainly due to the lower starting point in 2019 as well as the ongoing weakness in the market segments Textile Fibers and Industrial Applications. This impairment charge will be recorded in the third quarter 2019. In recent years acquired assets of the former joint ventures with BMW and Benteler are not affected by this impairment.

 

 

More information:
SGL Carbon
Source:

SGL Carbon SE

Notus (c) Notus Composites FZC
Notus
22.10.2019

Notus Composites celebrates a major manufacturing milestone

Notus Composites has achieved a major manufacturing milestone when the company’s one millionth m2 of fire retardant (FR) epoxy prepreg was shipped from its state-of-the-art facility in the UAE this month. Notus are supplying FR materials for several high profile infrastructure projects in the Middle East, with this latest batch of material being supplied for the new composite Museum of the Future in Dubai.

The one million m2 milestone was reached during a recent production run of Notus’ EPFR-609 glass fibre reinforced epoxy prepreg - a user friendly, long out life, FR prepreg designed for low pressure/vacuum curing at temperatures from 85-120˚C. EPFR-609 can also be supplied as a resin film or as Notus N1-Preg, the company’s versatile single sided prepreg product format. Having set up in 2015 but grown considerably in the past 4 years, Notus Composites has completed an extensive program of testing at well-known fire research laboratories in the Middle East and Europe with particular focus on large scale tests to verify material behavior as part of a complete wall or façade system.

Notus Composites has achieved a major manufacturing milestone when the company’s one millionth m2 of fire retardant (FR) epoxy prepreg was shipped from its state-of-the-art facility in the UAE this month. Notus are supplying FR materials for several high profile infrastructure projects in the Middle East, with this latest batch of material being supplied for the new composite Museum of the Future in Dubai.

The one million m2 milestone was reached during a recent production run of Notus’ EPFR-609 glass fibre reinforced epoxy prepreg - a user friendly, long out life, FR prepreg designed for low pressure/vacuum curing at temperatures from 85-120˚C. EPFR-609 can also be supplied as a resin film or as Notus N1-Preg, the company’s versatile single sided prepreg product format. Having set up in 2015 but grown considerably in the past 4 years, Notus Composites has completed an extensive program of testing at well-known fire research laboratories in the Middle East and Europe with particular focus on large scale tests to verify material behavior as part of a complete wall or façade system.

As a result, Notus Composites EPFR-609 prepreg and NE11-FR surface film is the only epoxy prepreg system to have passed the NFPA 285 exterior and curtain wall test and to have achieved an impressive B2,s1,d0 rating when testing to the European EN13501-1 standard. In addition, these materials have been approved by the UAE’s Dubai Civil Defense (one of the Middle East’s leaders in building fire safety coding) who completed a program of factory inspections and production audits as well as witnessing fire tests themselves.

More information:
Notus
Source:

100% Marketing

(c) Chomarat
09.10.2019

Chomarat fabrics at the KraussMaffei booth during K Messe 2019

Chomarat Group’s composite reinforcements will be featured at the KraussMaffei stand during the next K Messe in Düsseldorf. Chomarat has created a glass reinforcement adapted to the mass production of automotive parts, helping to lighten leaf springs by 60% compared to metal.

Automotive: Producing 60% lighter leaf springs for car's underbody
The new leaf springs made of composites are 60% lighter than their pendants made of steel thanks to KraussMaffei process and the involvement of a network of partners, including Chomarat with G-PLY™ glass reinforcement. Their strength can be deliberately increased in sections where it is required and the corrosion resistance offers further added value.

Chomarat Group’s composite reinforcements will be featured at the KraussMaffei stand during the next K Messe in Düsseldorf. Chomarat has created a glass reinforcement adapted to the mass production of automotive parts, helping to lighten leaf springs by 60% compared to metal.

Automotive: Producing 60% lighter leaf springs for car's underbody
The new leaf springs made of composites are 60% lighter than their pendants made of steel thanks to KraussMaffei process and the involvement of a network of partners, including Chomarat with G-PLY™ glass reinforcement. Their strength can be deliberately increased in sections where it is required and the corrosion resistance offers further added value.

“We created the fabrics, when Engenuity developed the component, Huntsman supplied the matrix system made of epoxy resin, Johns Manville supplied the glass fibers, Schmidt & Heinzmann manufactured the preforms, Alpex designed the RTM mold and Hufschmied (Bobingen, Germany) took charge of post-mold processing of the component by milling. KraussMaffei has taken over the project management for Hengrui and coordinates the project with the partners.” Francisco De Oliveira at Chomarat explains.

More information:
CHOMARAT K 2019
Source:

AGENCE APOCOPE

23.09.2019

Tape inserts offer big potential for injection molding parts

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

The project was divided into several phases: Phase I was used to identify the current status. In 20 interviews with representative companies of the injection molding industry, the researchers gathered why tape inserts have rarely been taken into account so far, when defining the material concepts to be analyzed. The lack of information about the material class, the procedure and tools for the development process and the necessary production technologies were cited as major challenges. This is where the consortium will take action and provide comprehensive information during the “Technology Information Day” on the extensively prepared state of the art and the high degree of maturity of the supply chain. Based on the status quo, they developed a methodology for analyzing the technological and economic potential of tape inserts in injection molding applications.

Both the previous results and the planned follow-up projects are the subject of the “Technology Information Day" at K 2019, to which the companies involved in the study, the AZL and IKV, invite all companies along the value chain, from raw material manufacturers to injection molders to OEMs. (Date: 18th October 2019, 10:00 am to 1:30 pm, Trade Fair Düsseldorf CCD South, Room 002).

The consortium, amongst others consisting of Asahi Kasei Europe GmbH, BASF SE, Borealis AG, BÜFA Thermoplastic Composites GmbH & Co. KG, ENGEL AUSTRIA GmbH, Huesker Synthetic GmbH, LG Hausys R&D Center, Mitsui Chemicals, Nippon Electric Glass, Polyscope Polymers BV, POLYTEC GROUP, Simcon kunststofftechnische Software GmbH, SABIC and Toray International Europe GmbH, is inviting to the “Technology Information Day” at K 2019. The goal is to inform about the technology and to identify topics for future collaboration.

Source:

AZL Aachen GmbH

Tiger Drone (c) COBRA International / HG Robotics
19.09.2019

COBRA delivers first 100 composite fuselage covers for cutting-edge drones

COBRA International is collaborating with HG Robotics, a leading drone manufacturer that specializes in unmanned aerial vehicles (UAVs) for the agricultural market, on a composite fuselage cover for the cutting-edge Tiger Drones.

Undertaking a full range of services with HG Robotics and having been involved from the outset: from the design and engineering through to the prototyping of the composite drone fuselage cover, COBRA has now delivered nearly 100 sets and will produce approximately 500 units throughout 2019.

COBRA International is collaborating with HG Robotics, a leading drone manufacturer that specializes in unmanned aerial vehicles (UAVs) for the agricultural market, on a composite fuselage cover for the cutting-edge Tiger Drones.

Undertaking a full range of services with HG Robotics and having been involved from the outset: from the design and engineering through to the prototyping of the composite drone fuselage cover, COBRA has now delivered nearly 100 sets and will produce approximately 500 units throughout 2019.

The multi-rotor Tiger Drones typically carry spraying equipment and can also carry high definition cameras that provide a wide range of field information. Farmers can measure land profiles, identify any problem plants or areas and manage their cultivation in the most efficient way. The 420 mm square shaped fuselage cover protects the drone’s electronic controls and forms an aerodynamic fairing between the central fuselage and the craft’s 4 rotor arms.
 
The COBRA Design and Development team selected a composite laminate of glass fibre reinforcements for the cover – which don’t interfere with GPS signals used by the drone - and combined these with epoxy laminating resins in a hand laminated, vacuum bag consolidated production process.

COBRA also designed all of the mould tools for the project. The 2-piece aluminium mould was produced by one of COBRA’s long-term tooling partners. This metallic tooling provides an excellent surface finish to the part with absolutely minimal trimming and finishing required.   Moulded parts can go swiftly through a painting and clear coating process before final inspection and delivery to the client.

Danu Chotikapanich, CEO of COBRA International comments: “Our collaboration with HG Robotics is going well, and we are hoping to collaborate further with them on other multi-rotor and fixed wing VTOL (vertical take-off and landing) drone models in the future. These are COBRA’s first parts for the agricultural industry, and they provide an exciting vision as to just a few of the possibilities for lightweight composites in this area and also in the wider commercial UAV market as a whole.”

More information:
glass fibers COBRA
Source:

COBRA International Ltd,

18.09.2019

Hexcel to Exhibit at CAMX 2019

STAMFORD, Conn. – At this year’s CAMX conference, taking place on September 24-26 in Anaheim, CA (Booth L42), Hexcel will promote its broad portfolio of composite innovations for aerospace and industrial applications.

On display at the Hexcel booth, visitors will see an integrated wing panel demonstrator made with HiMax™ non-crimp reinforcements that were specially developed to complement a new generation of infusion resin systems. Visitors will also see a wing box demonstrator made from HiTape® dry carbon reinforcements. Both parts were injected with Hexcel’s RTM6 infusion resin and incorporate a toughening veil to enhance mechanical properties to meet the structural requirements for aerospace parts.

STAMFORD, Conn. – At this year’s CAMX conference, taking place on September 24-26 in Anaheim, CA (Booth L42), Hexcel will promote its broad portfolio of composite innovations for aerospace and industrial applications.

On display at the Hexcel booth, visitors will see an integrated wing panel demonstrator made with HiMax™ non-crimp reinforcements that were specially developed to complement a new generation of infusion resin systems. Visitors will also see a wing box demonstrator made from HiTape® dry carbon reinforcements. Both parts were injected with Hexcel’s RTM6 infusion resin and incorporate a toughening veil to enhance mechanical properties to meet the structural requirements for aerospace parts.

With 50 years of experience and the most qualified carbon fiber positions on aerospace programs in the industry with its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate and is introducing a new fiber to its portfolio. HexTow® HM54 combines high modulus and high tensile strength, which allows structural designers to achieve higher safety margins for both stiffness and strength-critical applications. HexTow® carbon fibers are excellent not only for aerospace applications but also industrial and recreational applications. HexTow® carbon fibers are excellent not only for aerospace applications but also industrial and recreational applications, examples of golfing applications will be on display.

Additive manufacturing is on the forefront of innovation for composite technologies, and Hexcel is leading the way with its HexAM® additive manufacturing process. HexAM® additive manufacturing combines high performance PEKK thermoplastics with carbon fiber to produce flight-ready 3D printed HexPEKK® parts. HexPEKK® structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts in highly demanding aerospace, satellite and defense applications.

HexPly® M77 snap-cure prepregs are yet another example of Hexcel technology leading the way. HexPly® M77HF, the latest member of this quick-curing prepreg family, is revolutionizing the world of composites for high-performance sporting goods with its faster production times and excellent surface quality. It will be featured in the Hexcel booth in two products – a carbon fiber Goode water ski which is setting records in the competitive world with its precision and durability, and in a HED cycling wheel noted for its aerodynamics and light weight.

Among Hexcel’s latest technologies are the RF Interference Control materials made by ARC Technologies, a Hexcel company. A selection of these industry-leading custom RF / EMI and microwave absorbing composite materials for military, aerospace and industrial applications will be on display at the Hexcel booth.

HexForce® bias weave woven reinforcements are a patented solution to optimize material usage. These bias weave reinforcements are continuous rolls of carbon fiber fabric in which the warp and weft yarns are oriented on the bias at +/- 45° which can reduce prepreg waste up to 60%. Visitors at CAMX will be able to see this new woven reinforcement and learn more.

Source:

AGENCE APOCOPE

(c) Roof courtesy
09.09.2019

CHOMARAT’S CARBON RANGE IN THE SPOTLIGHT AT CAMX 2019 EXPO

At CAMX Expo, Chomarat is showcasing its range of carbon reinforcements, including live demos: a rocket fairing mold, a kayak paddle and a flat panel will be on display in the demonstration area of Composites One, a partner of Chomarat. The Chomarat carbon range is also available in the USA through Composites One’s distribution network.

DEMONSTRATING THE UNIQUE PROPERTIES OF CHOMARAT’S REINFORCEMENTS
For the rocket fairing mold, the kayak paddle and the flat panel applications, Chomarat’s C-WeaveTM carbon reinforcement offers a unique and excellent visual appearance and structural performance at the same time. “In addition to C-WeaveTM, the kayak paddle comprises another reinforcement: G-flowTM, the 2-in-1 reinforcement for infusion to strengthen the vacuum-flow,” explains Travis Irvin, Sales Manager and Closed Mould Process Expert at Chomarat.

Other live demos of skateboards will demonstrate the potential for high-volume production with RovicoreTM, the famous glass sandwich reinforcement created by Chomarat. ”RovicoreTM is always at the forefront of technology for LRTM process,” he adds.

At CAMX Expo, Chomarat is showcasing its range of carbon reinforcements, including live demos: a rocket fairing mold, a kayak paddle and a flat panel will be on display in the demonstration area of Composites One, a partner of Chomarat. The Chomarat carbon range is also available in the USA through Composites One’s distribution network.

DEMONSTRATING THE UNIQUE PROPERTIES OF CHOMARAT’S REINFORCEMENTS
For the rocket fairing mold, the kayak paddle and the flat panel applications, Chomarat’s C-WeaveTM carbon reinforcement offers a unique and excellent visual appearance and structural performance at the same time. “In addition to C-WeaveTM, the kayak paddle comprises another reinforcement: G-flowTM, the 2-in-1 reinforcement for infusion to strengthen the vacuum-flow,” explains Travis Irvin, Sales Manager and Closed Mould Process Expert at Chomarat.

Other live demos of skateboards will demonstrate the potential for high-volume production with RovicoreTM, the famous glass sandwich reinforcement created by Chomarat. ”RovicoreTM is always at the forefront of technology for LRTM process,” he adds.

Moreover, Chomarat is displaying a motorcycle helmet with exposed carbon and a very light kayak paddle, highlighting the properties of C-WeaveTM. A tennis racket using C-PLYTM will also be displayed at the show.

 

More information:
CHOMARAT
Source:

APOCOPE Agency