From the Sector

• 8^th edition to be held as the “Fair & Convention for Hightech Textiles” at the Carlowitz Congresscenter Chemnitz for the first time on 9 – 10 June 2020 – Textile themes from the LiMA exhibition for lightweight design are being integrated in the new format

 
The “mtex+” is raising its profile and is moving to an attractive setting. The 8^th edition of the international exhibition entitled “Fair & Convention for Hightech Textiles” will be held in the new Carlowitz Congresscenter at the heart of Chemnitz for the first time on 9 and 10 June 2020.
 
“The “mtex+” is a trade event that experts from various sectors greatly appreciate on account of its emphasis on dialogue and in-depth contacts – and because everything is on the spot. The modern, exciting ambiance at the new venue facilitates our desire to create the best possible atmosphere for cooperation in a trusting environment,” Dr Ralf Schulze, Managing Director of C3 GmbH, the organising company, explains. “In its future form, the “mtex+” will act as a source of ideas and inspiration for developers and manufacturers as well as for users of all kinds of high-tech textiles, specifically including composites, to a greater degree than in the past. Textile composite materials are becoming increasingly important for many processors. That’s the reason why we’re transferring the textile themes of the LiMA lightweight design exhibition, which has been held alongside the “mtex+” in the past, into our new trade fair format. Lightweight textile design in all its facets will be one of the major emphases at the “mtex+”.”    
 
The major topics covered by the 8th “mtex+” will include process development, textile engineering, digitalised value-added chains, services with potential for use across different sectors as well as recycling. The highlights of the programme will include workshops on effective and sustainable production, smart textiles, acoustic textiles, a special exhibition on health and protective textiles as well as an entertaining network evening entitled “Excellent connections”.

The North-Eastern German Textile and Clothing Industry Association (vti) believes that this concept exactly matches the needs of its target audience. “Chemnitz is located at the heart of the Central German industrial and research region, which is developing with great dynamism,” says vti Managing Director, Dr.-Ing. Jenz Otto. “Any firm that presents its products and services here will find itself in a very interesting market. Located not far from the border with the Czech Republic and Poland, the “mtex+” will also act as a dialogue forum for potential cooperation partners across sector and international boundaries, both for these and other Eastern European countries.”
 
The “mtex+” will continue to be held in Central Germany’s industrial city of Chemnitz every two years in future too. 159 exhibitors from seven different countries (in conjunction with the LiMA lightweight design exhibition) attended the 7th edition in the spring of 2018. 22 percent of the approx. 1,000 trade visitors came from abroad.

Hexcel is exhibiting at the Aero India show for the sixth time, continuing to support customers in the Indian subcontinent and throughout Asia. This year’s show takes place in Bangalore from February 20-24 (Stand AB2.5D, Hall AB) to promote a range of carbon fibers and composites that are benefiting Indian aerospace manufacturers for commercial aircraft, helicopters and space programs.

To coincide with the show, Hexcel is announcing the opening of its new sales office, Hexcel Composites India LLP. The office is located in Bangalore and will be fully operational in March 2019. Mr Vijay Sharma, Sales Manager, and Mr Ram Kumar, Technical Representative, will manage the sales activities and support key customers in the region.

Hexcel has supplied carbon and glass fiber fabrics, prepregs, honeycombs and adhesives to Indian aerospace companies for more than 28 years, including Hindustan Aeronautics Ltd (HAL), National Aerospace Lab (NAL), Indian Space Research Organisation (ISRO), Vikram Sarabhai Space Centre (VSSC) and TATA Advanced Materials.

Hexcel’s high strength and intermediate modulus carbon fiber range has been augmented by the launch of HexTow® HM63, a high modulus carbon fiber that has the highest tensile strength of any existing HM fiber. HexTow® HM63 provides outstanding translation of fiber properties in a composite, including superior inter-laminar shear and compression shear strength. HexTow® HM63 is therefore ideal for any high stiffness and strength-critical applications including space, satellites, UAV, commercial aerospace and helicopters.

At JEC World 2019, Sika Advanced Resins will unveil Ullit’s new composite tank for trucks that run on compressed natural gas (CNG).

Together with its tailor-made epoxy system designed by Sika Advanced Resins, who are a leader in the development and production of high-performance resins, the tank helps to reduce pollution in urban traffic.

An epoxy laminating system that adapts to different designs
The tank, which contains up to 320 liters is the same size as a conventional diesel fuel tank. "We have been innovating together for more than 10 years! Sika Advanced Resins has developed a specific resin for our new range of high-pressure tanks. This high-performance resin can be adapted to all design constraints, particularly for our very high-pressure hydrogen tanks, up to 700 bar," explains Ullit founder and CEO Claude Hembert.

Sika Advanced Resins has used its expertise to develop a tailor-made resin to withstand the cyclic pressurization loads on the filament-wound tanks. In combination with carbon fiber the resin provides mechanical resistance for different tank shapes including those for vehicles running on natural gas. "The tank is placed in the same place as a diesel fuel tank and avoids the need for transformations in trucks. In addition Ullit-Sika composites reduce the weight of the tank by a factor of four, a huge benefit when we estimate that one tonne saved on a truck saves four liters of fuel per 100 kilometers in urban traffic," explains Patrick Noirclerc, Local Expert Composites at Sika Advanced Resins.

The annual meeting for the Asia-Pacific professionals of the composites industry, organized for the second time in a row in Seoul, has met its high expectations attracting +12% participants and acting as a major showcase for the composites industry in the region.

KEY FIGURES

• +230 companies
• 45 speakers
• +7,000 professional visits
• 49 countries represented
• 12 JEC Innovation Awards
• +450 Business meetings
• 3 Composites Tours
• Top 3 visitors’ countries: Korea - China - Japan

Gauging from the attendance of more than 7,000 professional visits from 49 countries, Eric PIERREJEAN, CEO of JEC Group, has already announced during the opening ceremony that JEC Asia 2019 will return next year on November 13, 14, 15, 2019. This ceremony was attended by industrialists, academics and officials, reflecting the huge interest that composite materials generates. Thus, at this ceremony we could notice the participation of Mr. BANG Yun Hyuk, President of KCTECH, Mr. Song, Ha Jin Jeonbuk Provincial Governor, Mr. HAN Byung Do, Senior secretary to the South Korean President for political affairs, Mr. CHOI Jin Hyuk, Director at MOTIE, Mr. KIM Yang Won, Vice Mayor of Jeonju, demonstrating the whole support of the Korean community; and Mr. Fabien PENONE, French Ambassador, was also present to underline the strong links and industrial interactions between Korea and France.

Hosting, this year again, the International Carbon Festival organized by KCTECH and the Jeonju region, JEC Asia also provided a comprehensive program dedicated to the Automotive professionals with a leadership circle attended by top stakeholders of the industry worldwide, top-notch conferences on automotive automated processes and composite applications for structural parts with speakers from Hyundai Motor Group, e-Xstream Engineering, L&L Products, Cobra International, Hanwha Advanced Materials, Daimler, Hankuk Carbon, Arkema, Cetim, Saertex & Co. KG to name a few.

“Aeronautics: 53% and beyond” conferences took place and attracted many attendees to discover new composites solutions and their wider use in this sector with Stratasys,IS Group, Cevotec… JEC Asia also offered its participants a chance to find out new business opportunities, highlighting the most relevant for the region and various application sectors.
All in all, the show floor was filled with innovations as JEC Asia 2018 showcased innovative parts and awarded 12 composites International champions among which 3 were about automotive, at the JEC Innovation Awards ceremony.

Also, to be noted at JEC Asia was the focus on networking with pre-arranged Business meetings that generated +450 qualified one-to-ones over the 3 days. Likewise, 3 composites tours opened exclusive doors to attendees when they visited Hanyang University, the composite architecture of the House of Dior, LG Hausys & Kolon and a day trip in Jeonju region and the Carbon Valley of the KCTECH.
For the first time, JEC Asia teamed up with MAI Carbon to offer a brand-new Student Program that keeps abreast of composite-industry needs to hire young, committed well-trained engineers. The two-part program included workshops with a focus on theoretical foundations and a guided tour through the JEC Asia trade show and the innovation planet.

Chomarat has specialized in scrim reinforcements for construction materials for more than 50 years. Now, it has invested in a new pilot production line to develop its next generation of reinforcements. Unique in the market and designed entirely by CHOMARAT’s teams, this technological innovation was born by the Group’s body of technological know-how. Conceived for the development of next generation cement board and roof-waterproofing reinforcements, the machine is versatile for developing materials for new markets. The new line will become operational in early 2019 at CHOMARAT’s construction plant in Anderson, South Carolina, USA.

A technological innovation for higher performance
The new pilot line will enable CHOMARAT to accelerate its development projects focusing on cost, performance and sustainability. The Group’s goal is to launch a new generation of laid scrim reinforcements for construction materials, with incomparable performance. “We are working on all the parameters (technological, chemical formulations, textile fibers) to optimize the performance of CHOMARAT scrims, such as protecting glass against alkali in cement or increasing impact resistance and water repellency. We plan to stay in front of economic and environmental challenges facing the construction market,” explains Raphaël PLEYNET, Director of Composites & Construction Europe at CHOMARAT.

“This pilot scrim line is a key element in the Group’s global innovation and development strategy. The technological developments achieved on this equipment will enable us to lead through innovation, meet the challenges to come for construction materials, and enhance our value to the market” adds John LEATHAM, Director of Sales and Marketing at CHOMARAT North America.

Combining expertise from textile and chemical-formulation technologies
The scrims designed and developed by CHOMARAT are reputed for their advantages: dimensional stability, laminating quality with other materials (film or veils), excellent mechanical performance, and very good protection against the alkalinity of cement. “CHOMARAT’s knowhow in laid-scrim manufacturing is based on the combined expertise in textile and chemical-formulation technologies. With this new pilot technology, CHOMARAT will be able to build on these two advantages and propose even better-performing materials!” concludes Philippe SANIAL, Director of Research & Technologies at CHOMARAT.

Das Institut für Textiltechnik der RWTH Aachen University, kurz ITA, zeigt auf der Composites Europe in Stuttgart vom 06.-08. November Produkte, Bauteile und Maschinen entlang der Faserverbundprozesskette. Das ITA präsentiert sich auf dem Stand des Aachener Zentrums für integrativen Leichtbau (AZL) in Halle 9, Stand E70. Anhand verschiedener Demonstratoren werden ausgewählte innovative Prozesse und Produkte über die einzelnen Schritte hin dargestellt. Die Exponate stammen aus unterschiedlichen Anwendungsfeldern: Von Mobilitätsanwendungen bis hin zur Baubranche. Anbei ein Beispiel aus dem Baubereich:

Durch den Barhocker aus Beton mit hybrider Carbon-Textilbewehrung beweist das ITA, dass Textilbetonelemente eine enorme geometrische Gestaltungsfreiheit ermöglichen und gleichzeitig einfach herstellbar sind. Bislang war die manuelle Positionierung der Textilbewehrung zeitaufwändig und komplex, da zulässige Toleranzen im Millimeterbereich liegen. So trug die Fertigung hauptsächlich zu den hohen Kosten von Textilbeton bei.

Am ITA wurde gemeinsam mit den beiden Industriepartnern Albani Group GmbH & Co. KG und DuraPact 2.0 Kompetenzzentrum Faserbeton GmbH eine neue Hybridbewehrung mit integriertem Ab-standshalter entwickelt. Diese Hybridbewehrung senkt die erforderliche Zeit zur Positionierung der Bewehrung um bis zu 60 Prozent und macht den Werkstoff damit deutlich wettbewerbsfähiger.

Die kostengünstige, hybride Bewehrung enthält einen integrierten Abstandshalter und ermöglicht damit die einfache Positionierung von trockenen und beschichteten Bewehrungen. Durch den integrierten Abstandhalter lassen sich schnell mehrere Bewehrungslagen stapeln, wodurch der gewünschte Bewehrungsgrad einstellbar ist. Die Hybridbewehrung besteht aus einem Carbon- oder Glasfasergitter, das mit einer durchlässigen Matte aus Polyamid gefügt ist und in naher Zukunft bei den Industriepartnern als Rollenware erhältlich ist.

Twelve companies from eight different countries will receive a JEC Innovation Award at JEC Asia 2018. Asia-Pacific is an innovative region that sets the tone for all other regions of the globe. Once again, the JEC Innovation Awards highlight how composites bring solutions considering the new challenges in terms of efficiency, sustainability and life-cycle analysis.

This year, JEC Group awards innovations in the following categories: aerospace (structural and tooling), automotive, commercial vehicles, e-mobility, marine, railway, sports & leisure, infrastructure & civil engineering, industrial equipment, sustainability and additive manufacturing.

The ceremony will take place on Thursday November 15, 2018 at the COEX Center of Seoul (South Korea). Ida DAUSSY (Seo Hye-na), will host the ceremony in front of officials, manufacturers, scientists and composites professionals.

Category: AEROSPACE – STRUCTURAL
Winner: CSIR National Aerospace Laboratories (India)

Most of the composite structures for aircraft are made of carbon-epoxy composites, which can withstand a maximum service temperature of 130°C. As a consequence, carbon-epoxy materials cannot be used in hot zones like engine vicinity areas. The Aeronautical Development Agency (ADA) and CSIR-NAL took up the challenge of developing high temperature resistant composites for use in hot zones of light combat aircraft, which would result in significant weight and cost savings, as well as a considerable reduction in the meantime between failures (MTBF) due to thermal ageing.

The first task was to choose a material system with a service temperature of about ~ 200°C. During the material selection process, it was found that BMI resins are a relatively young class of thermosetting polymers. Hence, a carbon-BMI prepreg was selected due to a number of unique features including excellent physical property retention at elevated temperatures and in wet environments.

It was realized that weight savings and performance can be maximized using co-curing technology. This results in a large reduction of fabrication cycle times, costs and weight. Co-cured structures have fewer fasteners, which results in shorter assembly cycle times and also reduces sealing issues.

A prototype engine bay door assembly was built and tested at 180°C for flight certification. The engine bay door consists of an inner skin and co-cured outer skin assembly with eight transverse stiffeners. The stiffeners were designed with ‘J’ sections. The door size was 1.5 m length, 1 m width and 0.4 m overall depth. The co-cured door was developed using autoclave moulding. Two doors were installed in prototype aircraft and successfully flown.

• 16-18 October 2018, Kay Bailey Hutchinson Convention Center, Dallas, TX

A skateboard, architectural panels and a rigid roof for boats – all three products rely on CHOMARAT composite reinforcements. The three designs will be on display at CAMX Expo in the demonstration area of COMPOSITES ONE, partner of CHOMARAT and leader in composites distribution in North America. CHOMARAT’s reinforcements enable to give unique properties to these three applications.

Proof positive: reinforcements offer design flexibility & improved mechanical performance

These three applications give CHOMARAT the opportunity to demonstrate the performance of its uniquely designed reinforcements in real time. “The skateboard combines Rovicore™, the multi-function closed-mold reinforcement developed by CHOMARAT, with C-Weave™, its woven carbon fabric that offers both structural performance and aesthetics to the design. Rovicore™ provides the permeability, while C-Weave™ provides the carbon aspect,” explains Brian Laufenberg, president, CHOMARAT North America.

During the live demos, architectural panels using Rovicore™ and a rigid boat roof in RTM will also be made. “With 60 years of expertise in designing composite reinforcements, CHOMARAT demonstrates that its reinforcements offer excellent mechanical performance and design for a large number of projects in sectors as diverse as sport and leisure, marine and building,” adds Travis IRVIN, Sales Manager and Closed Mould Process Expert at CHOMARAT.

Meet CHOMARAT teams at BOOTH V39 and see Live demos in the COMPOSITES ONE demonstration area at CAMX 2018 EXPO

• Back to Seoul: JEC Asia gathers the composites industry in Korea for its 11th edition
• JEC Asia, November 14-16, 2018 – COEX Center, Seoul, South Korea

Paris - After the record-breaking figures of the 2017 edition, that marked the move of JEC Asia from Singapore to Seoul, the event is returning to the capital city of the Republic of Korea with a strong program, not only on the exhibition floor, but also in the conference sessions and all services at the disposal of every attendee.

“We are very grateful for the support of the industry, government bodies, and academics, regarding the evolution of JEC Asia, that has led to the success of the platform. Indeed, 90% of the show floor is already booked which bodes well for the preparation of the event.” Commented Christian STRASSBURGER, Events Director Asia for JEC Group.

“On top of that, the event is truly international, as 45% of the exhibitors are coming from outside Asia. JEC Asia will welcome pavilions from Germany, France, Italy, Japan, China and Singapore, as well as the major composite clusters in Korea.” He added.

FOCUS ON THE AUTOMOTIVE INDUSTRY

The future of mobility is a hot topic for composite materials and JEC Asia will represent, promote and provide information about the increasing integration of composites in automotive developments.
Numerous programs will be offered, such as a whole day conference on Composites in Automotive, a Leadership Composites Circle, an Auto Planet, showcasing parts, a B2B meetings program, a JEC Innovation´Award category and Composites tours (site visits of composite-related facilities).

Finally, for the second time, JEC Asia will host the International Carbon Festival, organized by KCTECH and the Jeonju region, with top-notch conferences and international speakers.

Key Figures 2017

• +230 companies
• 6,271 professional visits
• 43 speakers
• 42 countries represented
• 12 JEC Innovation Awards
• 400 B2B meetings
• 2 Composites Tour

Das Aachener Zentrum für Integrative Leichtbau (AZL) der RWTH Aachen installiert in seinem Technikum eine neue ENGEL-Spritzgießanlage. Die ENGEL Deutschland GmbH, in Kooperation mit dem ENGEL Technologiezentrum für Leichtbau-Composites in Österreich, wird das 2-Komponenten-Spritzgieß-System mit Drehtisch und 17.000 kN Schließkraft im Jahr 2019 in Betrieb nehmen. Dieser Maschinenaufbau ist die Basis für die Weiterentwicklung effizienter Inline-Kombinations-Technologien mit unterschiedlichen Polymerwerkstoffen.

Das ENGEL-Spritzgießsystem ermöglicht die innovative Kombination bereits etablierter Faserverbundkunststoff-Verfahren und die Entwicklung neuer individueller Verfahren. Im Mittelpunkt steht die Steigerung der Ressourceneffizienz in der Leichtbau-Produktion. Mit der neuen Anlage können neue Forschungs- und Entwicklungsinitiativen einen effizienteren Materialeinsatz adressieren, der letztlich der Schlüssel zur Massenproduktion von Leichtbauteilen ist. Der Fokus wird dabei auf Multimaterialsystemen, kontinuierlichen Prozessen und Prozessketten sowie selbstoptimierenden Prozesse liegen.

Dr.-Ing. Michael Emonts, Geschäftsführer des Aachener Zentrums für integrativen Leichtbau (AZL) freut sich darauf, mit dem neuen Spritzgießsystem neue innovative Leichtbauverfahren zu realisieren: „Diese neue Spritzgießanlage bietet uns als Spezialisten für die Leichtbau-Produktionstechnik in Kooperation mit den Spritzgießexperten des Instituts für Kunststoffverarbeitung – dem IKV – die Möglichkeit, Hybridverfahren für industrielle Leichtbau-Anwendungen zu etablieren. Das System wird unseren bestehenden Maschinenpark im AZL-Technikum erweitern und als wichtige Plattform für die Leichtbau-Forschung an der RWTH zur Verfügung stehen."

Als aktive Partnerfirma des AZL-Partnernetzwerks arbeitet ENGEL bereits seit vielen Jahren eng mit dem AZL zusammen. Dr. Stefan Engleder, CEO der ENGEL-Gruppe, betont die Bedeutung dieser engen Zusammenarbeit mit den Technischen Universitäten und insbesondere mit dem AZL: „Das AZL bietet beste Voraussetzungen für industrienahe Forschungsaktivitäten im Bereich Leichtbau-Verbundwerkstoffe, da es sich durch einen starken interdisziplinären Ansatz auszeichnet. Das AZL profitiert von der guten Infrastruktur und der Zusammenarbeit mit namhaften Instituten der RTWH Aachen. ENGEL freut sich auf die Zusammenarbeit mit dem AZL bei der Entwicklung effizienter Leichtbau-Verbundwerkstoff-Massenproduktionsverfahren.“

Das AZL-Technikum umfasst neben den zahlreichen Faserverbund- und Leichtbauanlagen auf dem Campus der RWTH Aachen zusätzliches Großserien-Equipment für die Entwicklung von Verfahren zur Leichtbau-Produktion, wie zum Beispiel eine Composite-Presse der Schuler Pressen GmbH mit 18.000 kN Schließkraft.