From the Sector

Reset
175 results
Lenzing: Sustainable geotextiles as glacier protection and jacket (c) UN Nations
22.03.2024

Lenzing: Sustainable geotextiles as glacier protection and jacket

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The covering of a small area with the new material made from LENZING™ fibers was tested for the first time during a field test on the Stubai Glacier. Four meters of ice were saved from melting. This was confirmed in a study conducted by the University of Innsbruck and the Austrian glacier lift operators on the Stubai Glacier in Tyrol (Austria). In 2023, the pilot project was successfully extended to all Austrian glaciers used by tourists.

Last year, the project was also awarded first place in the prestigious Swiss BIO TOP Awards for wood and material innovations.

Lenzing takes this innovation project as an opportunity to inspire collaborative action towards sustainable practices and circularity in the textile value chain. Together with a network of innovative partners, Lenzing is working on processing geotextiles into new textile fibers giving them a second life as a garment. The use of geotextiles is usually limited to two years, after which the nonwovens would be disposed of. In the first phase of the pilot project, the recycling of nonwovens made for geotextiles use has been successfully tested and a fashionable “Glacier Jacket” has been produced, showcasing that the recycling of geotextiles is viable. Next to Lenzing, the network includes Marchi & Fildi Spa, a specialist in the field of mechanical recycling, the denim fabric manufacturer Candiani Denim and the fashion studio Blue of a Kind.

18.03.2024

Lenzing: Combined annual and sustainability report 2023

  • Combination of financial and non-financial reporting as evidence of the central role of sustainability
  • Measurable progress in achieving sustainability and climate targets
  • Recognized for sustainability and prepares for the European Green Deal

The Lenzing Group has published a combined annual and sustainability report for the first time, reaffirming the strategic importance of social and environmental responsibility for the company. With the title “Ready to join?”, Lenzing would like to extend an invitation to all customers and partners to join forces to renew the textile and nonwovens industries and bring about positive change.

“This annual and sustainability report is also an invitation to find answers together. Lenzing is working tirelessly to make the industries in which it operates even more sustainable and to drive the transformation of the textile business model from linear to circular. For this transformation to be successful, further efforts by the entire industry and a policy designed to ensure a level playing field for sustainability pioneers are needed,” says Stephan Sielaff, CEO of the Lenzing Group.

  • Combination of financial and non-financial reporting as evidence of the central role of sustainability
  • Measurable progress in achieving sustainability and climate targets
  • Recognized for sustainability and prepares for the European Green Deal

The Lenzing Group has published a combined annual and sustainability report for the first time, reaffirming the strategic importance of social and environmental responsibility for the company. With the title “Ready to join?”, Lenzing would like to extend an invitation to all customers and partners to join forces to renew the textile and nonwovens industries and bring about positive change.

“This annual and sustainability report is also an invitation to find answers together. Lenzing is working tirelessly to make the industries in which it operates even more sustainable and to drive the transformation of the textile business model from linear to circular. For this transformation to be successful, further efforts by the entire industry and a policy designed to ensure a level playing field for sustainability pioneers are needed,” says Stephan Sielaff, CEO of the Lenzing Group.

The results for the 2023 financial year were already published. The report was once again prepared in digital form and is now available.

Source:

Lenzing AG

16.02.2024

Lenzing updated its climate targets

The Lenzing Group has updated its climate targets to align with the goals of the Paris Agreement to limit the human-induced global temperature increase to 1.5 degrees Celsius. The Science Based Targets Initiative (SBTi) has reviewed and confirmed this target improvement.

By 2030, Lenzing aims to reduce its direct emissions from the production of its fiber and pulp plants (scope 1) and its emissions from purchased energy (scope 2) by 42 percent and its indirect emissions along the value chain (scope 3) by 25 percent on the way to net zero, from 2021 baseline. This corresponds to an absolute reduction of 1,100,000 tons (instead of the previously targeted 700,000 tons).

The following targets were recognized and confirmed by the SBTi:

The Lenzing Group has updated its climate targets to align with the goals of the Paris Agreement to limit the human-induced global temperature increase to 1.5 degrees Celsius. The Science Based Targets Initiative (SBTi) has reviewed and confirmed this target improvement.

By 2030, Lenzing aims to reduce its direct emissions from the production of its fiber and pulp plants (scope 1) and its emissions from purchased energy (scope 2) by 42 percent and its indirect emissions along the value chain (scope 3) by 25 percent on the way to net zero, from 2021 baseline. This corresponds to an absolute reduction of 1,100,000 tons (instead of the previously targeted 700,000 tons).

The following targets were recognized and confirmed by the SBTi:

  1. Overall net-zero target: Lenzing AG commits to reach net-zero greenhouse gas emissions along the entire value chain by 2050.
  2. Near-term targets: Lenzing AG commits to reduce absolute scope 1 and scope 2 greenhouse gas emissions by 42 percent by 2030 from a base year 2021. Lenzing AG also commits to reduce absolute scope 3 greenhouse gas emissions from purchased goods and services, fuels and energy-related activities as well as upstream transport and distribution by 25 percent within the same timeframe.
  3. Long-term targets: Lenzing AG commits to reduce absolute scope 1 and scope 2 greenhouse gas emissions by 90 percent by 2050 from a base year 2021. Lenzing AG also commits to reduce absolute scope 3 greenhouse gas emissions by 90 percent within in the same timeframe.

These updated targets replace the old SBTi approved Lenzing Group’s climate target in 2019.

26.01.2024

Lenzing: Impairment requirements (EBIT) for the financial year 2023

  • EBITDA of around EUR 300 million expected for 2023
  • Non-cash impairment losses of up to EUR 480 million
  • Implementation of the performance program fully on track

The annual valuation of assets in accordance with IFRS for the entire Lenzing Group both nationally in Austria and internationally, has resulted in a projected asset impairment of up to EUR 480 million for the 2023 financial year.1 The reasons for the impairment requirements are, on the one hand, continued uncertainties in the economic environment and, on the other hand, still increased raw material and energy costs as well as a higher interest rate environment.

The impairment losses are non-cash effective and have no impact on the full-year EBITDA for 2023, but do affect EBIT for the 2023 financial year. The Managing Board is specifying the previous earnings forecast for the 2023 financial year (EBITDA: EUR 270 – 330 million) and expects an EBITDA of around EUR 300 million.

  • EBITDA of around EUR 300 million expected for 2023
  • Non-cash impairment losses of up to EUR 480 million
  • Implementation of the performance program fully on track

The annual valuation of assets in accordance with IFRS for the entire Lenzing Group both nationally in Austria and internationally, has resulted in a projected asset impairment of up to EUR 480 million for the 2023 financial year.1 The reasons for the impairment requirements are, on the one hand, continued uncertainties in the economic environment and, on the other hand, still increased raw material and energy costs as well as a higher interest rate environment.

The impairment losses are non-cash effective and have no impact on the full-year EBITDA for 2023, but do affect EBIT for the 2023 financial year. The Managing Board is specifying the previous earnings forecast for the 2023 financial year (EBITDA: EUR 270 – 330 million) and expects an EBITDA of around EUR 300 million.

Stephan Sielaff, Chief Executive Officer of the Lenzing Group: “In the third quarter of 2023, we responded to the persistently difficult market environment and launched a comprehensive performance program, which we have been consistently implementing since then with a focus on positive free cash flow and stronger sales and margin growth. We can therefore confirm our earnings forecast with an EBITDA of around EUR 300 million. The valuation adjustment in accordance with IFRS does not change the strategic orientation of the Lenzing Group.”

Nico Reiner, Chief Financial Officer, adds: “The implementation of the performance program is going according to plan. In the future, cost measures alone are expected to contribute more than EUR 100 million to earnings annually, of which more than EUR 50 million will already be effective for the 2024 financial year. We are on target, particularly in terms of strengthening free cash flow, and we also achieved positive free cash flow in the fourth quarter. The revaluation of assets is now consistent and the right step for the future direction.”

The 2023 annual results will be presented on March 15, 2024.
 

1 Subject to potential changes resulting from the ongoing financial audit

Source:

Lenzing AG

Advance Denim launches collection with Lenzing's matte TENCEL™ Lyocell fibers (c) Advance Denim
24.01.2024

Advance Denim launches collection with Lenzing's matte TENCEL™ Lyocell fibers

Lenzing Group announced the collaboration with China’s internationally recognized denim mill, Advance Denim, to use matte TENCEL™ Lyocell fibers for their latest Denim Collection.

The TENCEL™ brand offers innovative and planet-friendly fiber solutions1 that strive to enhance the adoption of responsible production2 within the textile industry. Leveraging resource-saving, closed-loop production process3, TENCEL™ fibers are naturally soft and smooth to the touch and support a natural dry feeling through moisture control. The rollout of matte TENCEL™ Lyocell fibers in 2021 provided denim manufacturers with a solution that enabled them to enjoy the ample tactile and environmental benefits of TENCEL™ fibers, while also maintaining a matte finish on the end product.

Lenzing Group announced the collaboration with China’s internationally recognized denim mill, Advance Denim, to use matte TENCEL™ Lyocell fibers for their latest Denim Collection.

The TENCEL™ brand offers innovative and planet-friendly fiber solutions1 that strive to enhance the adoption of responsible production2 within the textile industry. Leveraging resource-saving, closed-loop production process3, TENCEL™ fibers are naturally soft and smooth to the touch and support a natural dry feeling through moisture control. The rollout of matte TENCEL™ Lyocell fibers in 2021 provided denim manufacturers with a solution that enabled them to enjoy the ample tactile and environmental benefits of TENCEL™ fibers, while also maintaining a matte finish on the end product.

“Matte TENCEL™ fibers are an extremely important innovation for the denim sector as they address the need for responsible denim made with less shine for a more vintage look. Many brands are currently looking for styles that meet this criterion while also providing softness and drapability for wide-leg jeans. Matte TENCEL™ fibers create the perfect mixture of performance and sustainability without sacrificing that true vintage indigo look,” said Amy Wang, General Manager of Advance Denim. “The matte denim in the ‘Denim Collection’, achieved by using matte TENCEL™ fibers, not only has exceptional softness to the touch, but its fiber properties also make the denim more like traditional cotton jeans after washing. This will enable the final garments to retain the intended retro style of the fabric.”

 

1 TENCEL™ Lyocell and Modal fibers are certified with the EU Ecolabel for textile products (license no. AT/016/001) for environmental excellence.
2 The responsible production of TENCEL™ Lyocell and Modal fibers uses at least 50% less water and emits at least 50% less CO2 compared to generic lyocell and modal fibers, according to Higg MSI, thereby saving precious resources for future generations. Results based on LCA standards (ISO 14040/44) and available via Higg MSI (Version 3.7).
3 Savings consider solvent recovery.

Source:

Lenzing Group

Lenzing: TENCEL™ Lyocellfasern für Stretchstoffe (c) Lenzing AG
22.01.2024

Lenzing: TENCEL™ Lyocellfasern für Stretchstoffe

Die Lenzing Gruppe hat ein neues Verarbeitungsverfahren für Lyocellfasern der Marke TENCEL™ angekündigt, das speziell auf die Herstellung von Stretchstoffen ausgerichtet ist und für höheren Tragekomfort sorgt.

Beim neuen Verarbeitungsverfahren von Lenzing wird vorbehandeltes Gewebe aus TENCEL™ Lyocellfasern einem weiteren Überarbeitungsschritt unterzogen. Während der Nassverarbeitung nimmt der Durchmesser von TENCEL™ Lyocellfasern erheblich zu, was einen stärkeren Crimp des Garns in Schussrichtung zur Folge hat. So erhält man einen dehnbaren Stoff mit verbesserter Rücksprungfähigkeit1, der nicht leicht einläuft oder knittert und auch nach dem Waschen seinen glatten Look bewahrt2.

Die Lenzing Gruppe hat ein neues Verarbeitungsverfahren für Lyocellfasern der Marke TENCEL™ angekündigt, das speziell auf die Herstellung von Stretchstoffen ausgerichtet ist und für höheren Tragekomfort sorgt.

Beim neuen Verarbeitungsverfahren von Lenzing wird vorbehandeltes Gewebe aus TENCEL™ Lyocellfasern einem weiteren Überarbeitungsschritt unterzogen. Während der Nassverarbeitung nimmt der Durchmesser von TENCEL™ Lyocellfasern erheblich zu, was einen stärkeren Crimp des Garns in Schussrichtung zur Folge hat. So erhält man einen dehnbaren Stoff mit verbesserter Rücksprungfähigkeit1, der nicht leicht einläuft oder knittert und auch nach dem Waschen seinen glatten Look bewahrt2.

Die in den Stretchstoffen verwendeten TENCEL™ Lyocellfasern werden in einem ressourcensparenden geschlossenen Produktionskreislauf3 hergestellt, das verwendete Holz stammt aus kontrollierten oder zertifizierten Quellen. Somit stellen sie eine von fossilen Rohstoffen freie Alternative zu herkömmlichen synthetischen Materialien dar. Darüber hinaus lassen sich die Fasern im Endprodukt identifizieren und bis zu ihrem Ursprung zurückverfolgen, wodurch eine größere Verantwortung und Transparenz in der Lieferkette gewährleistet wird.

1 Daten aus dem SGS-Bericht Nr. SL12100263549701TX. Material: Stoffe aus 100% TENCEL™ Lyocell Ne30 x Ne30 / 98*74
2 Daten aus dem SGS-Bericht Nr. SL12200348946801TX: Material: Stoffe aus 100% LENZING™ Lyocell Ne50 x Ne50 / 116x75
3 Die Einsparungen berücksichtigen die Lösungsmittelrückgewinnung.

Source:

Lenzing AG

17.01.2024

Lenzing: Top sustainability ratings

The Lenzing Group has once again been recognized for its sustainability performance and its active contribution to transforming the industry towards a circular economy. The rating agency MSCI awarded Lenzing an “AA” rating for the third time in a row, placing Lenzing among the top eight percent of rated companies in its peer group. In addition, Lenzing participated for the first time in the SAC Higgs FEM verification to assess the environmental impact of product manufacturing at its sites and achieved positive results.

The Lenzing Group has once again been recognized for its sustainability performance and its active contribution to transforming the industry towards a circular economy. The rating agency MSCI awarded Lenzing an “AA” rating for the third time in a row, placing Lenzing among the top eight percent of rated companies in its peer group. In addition, Lenzing participated for the first time in the SAC Higgs FEM verification to assess the environmental impact of product manufacturing at its sites and achieved positive results.

According to the rating agency MSCI, Lenzing continues to lead the way among global companies in terms of governance structures. In addition, MSCI highlights Lenzing’s leadership in implementing initiatives to mitigate the risk of environmental liabilities associated with the release of toxic pollutants and highlights its water stewardship program, which includes a water risk assessment. The confirmation of the “AA” rating from MSCI ESG enables Lenzing to further reduce its interest expense. In November 2019, Lenzing placed a bonded loan in the amount of around EUR 500 mn, which is linked to the company's sustainability performance. In line with its commitment under the bonded loan, the company will donate the entire interest expense it saves thanks to the “AA” rating to a social-ecological project.

By November 2023, all Lenzing sites, with the exception of the sites in Brazil and Thailand, which are however scheduled for 2024, have completed the first external verification of the module with excellent results. With almost 20,000 participating companies from different sectors of industry, which achieved less than 50 percent in total average in 2023, Lenzing sites achieved verified scores of more than 70 percent to 95 percent.

Source:

Lenzing AG

VEOCEL™ showcased LENZING™ Lyocell Dry fiber (c) Lenzing Group
18.12.2023

VEOCEL™ showcased LENZING™ Lyocell Dry fiber

With the growing demand among brands and consumers for plastic-free materials and ingredient transparency, VEOCEL™, the flagship specialty nonwovens brand of Lenzing Group, showcased LENZING™ Lyocell Dry fiber at Hygienix 2023. LENZING™ Lyocell Dry fiber which is not classified as “plastic” according to EU SUPD, meets the growing interest for plastic-free nonwoven products across the industry and among consumers. Additionally, along with being an environment-friendly solution, the fiber delivers high-performance dryness and comfort which makes it the optimum fiber choice for absorbent hygiene applications.

Comprised of mostly fossil-based materials, absorbent hygiene products are an essential part of many consumers’ daily lives. With heightened concerns towards environmental impact, the product segment has been undergoing a change caused by shifting consumer preferences, increased consciousness and concerns towards plastic waste, and technology advancement. LENZING™ Lyocell Dry fiber has embraced these changes without compromising on quality or performance.

With the growing demand among brands and consumers for plastic-free materials and ingredient transparency, VEOCEL™, the flagship specialty nonwovens brand of Lenzing Group, showcased LENZING™ Lyocell Dry fiber at Hygienix 2023. LENZING™ Lyocell Dry fiber which is not classified as “plastic” according to EU SUPD, meets the growing interest for plastic-free nonwoven products across the industry and among consumers. Additionally, along with being an environment-friendly solution, the fiber delivers high-performance dryness and comfort which makes it the optimum fiber choice for absorbent hygiene applications.

Comprised of mostly fossil-based materials, absorbent hygiene products are an essential part of many consumers’ daily lives. With heightened concerns towards environmental impact, the product segment has been undergoing a change caused by shifting consumer preferences, increased consciousness and concerns towards plastic waste, and technology advancement. LENZING™ Lyocell Dry fiber has embraced these changes without compromising on quality or performance.

LENZING™ Lyocell Dry is a cellulosic environment-friendly wood-based alternative to fossil-based fibers. Besides offering great performance features such as liquid management, dryness, gentle-on-the-skin comfort, softness, and quality, LENZING™ Lyocell Dry helps to meet the needs of customers who are aiming to produce plastic-free applications or end products that do not harm the planet without compromising on performance or comfort.

Featuring Lenzing’s unique Dry technology, LENZING™ Lyocell Dry’s hydrophobic characteristics and liquid-controlling properties make it the ideal fiber for absorbent hygiene products. Its high-performing hydrophobicity makes it the optimal choice for a wide range of applications, including baby diapers, feminine care and personal hygiene products as well as adult incontinence products.

The fiber has consistently been tested by Lenzing as the softest* fiber among cellulosic fibers in both dry and wet stages. LENZING™ Lyocell Dry will enable brands and manufacturers to deliver quality hygiene products that provide a high level of comfort, softness, and dryness.

*Lenzing AG softness panel test

Source:

Lenzing Group

Norafin: Nachhaltige Tuchmasken aus Lenzing VEOCEL™ Fasern (c) Norafin
06.12.2023

Norafin: Nachhaltige Tuchmasken aus Lenzing VEOCEL™ Fasern

Tuchmasken, die sich bei Konsumentinnen und Konsumenten seit einigen Jahren hoher Beliebtheit erfreuen, bestehen normalerweise aus einem dünnen Vliesstoff und werden in pflegendes Serum getränkt. Die von Norafin hergestellten Vliesstoffe mit Lenzings nachhaltigen VEOCELTM Lyocell Skin Cellulosefasern sind eine umweltbewusstere Alternative zu Tuchmasken aus erdölbasierten Synthetikfasern.

Funktional und umweltfreundlich
Umweltfolgen von Produkten sowie die Nachhaltigkeit von Inhaltsstoffen rücken zunehmend in den Fokus von Kundinnen und Kunden, Handel und Institutionen. Die starke Nachfrage an ökologischen Alternativen stieg mit der in der EU geltenden Kennzeichnungspflicht für Produkte mit Kunststoffanteilen (SUPD) zusätzlich an. Gleichzeitig stellt die Kosmetikindustrie hohe Anforderungen an die Leistungsfähigkeit ihrer Produkte. Mit der Verwendung von VEOCELTM Lyocell Skin Fasern für Tuchmasken gelingt die Verbindung von Funktionalität und Nachhaltigkeit.

Tuchmasken, die sich bei Konsumentinnen und Konsumenten seit einigen Jahren hoher Beliebtheit erfreuen, bestehen normalerweise aus einem dünnen Vliesstoff und werden in pflegendes Serum getränkt. Die von Norafin hergestellten Vliesstoffe mit Lenzings nachhaltigen VEOCELTM Lyocell Skin Cellulosefasern sind eine umweltbewusstere Alternative zu Tuchmasken aus erdölbasierten Synthetikfasern.

Funktional und umweltfreundlich
Umweltfolgen von Produkten sowie die Nachhaltigkeit von Inhaltsstoffen rücken zunehmend in den Fokus von Kundinnen und Kunden, Handel und Institutionen. Die starke Nachfrage an ökologischen Alternativen stieg mit der in der EU geltenden Kennzeichnungspflicht für Produkte mit Kunststoffanteilen (SUPD) zusätzlich an. Gleichzeitig stellt die Kosmetikindustrie hohe Anforderungen an die Leistungsfähigkeit ihrer Produkte. Mit der Verwendung von VEOCELTM Lyocell Skin Fasern für Tuchmasken gelingt die Verbindung von Funktionalität und Nachhaltigkeit.

Einsatz von nachwachsenden Rohstoffen
VEOCELTM Lyocell Skin Fasern werden aus dem nachwachsenden Rohstoff Holz, aus verantwortungsvoll bewirtschafteten Wäldern, gewonnen. Die Fasern sind sanft zur Haut und gewährleisten durch ihre glatte Oberfläche ein angenehmes Pflegeerlebnis.
„Durch die dreidimensionale Faserausrichtung entsteht in der Produktion von Norafin mittels Wasserstrahltechnologie ein in alle Richtungen reißfester, gereinigter und weicher Vliesstoff. Die Verfestigung der Fasern erfolgt dabei durch pure Wasserkraft und ohne zusätzliche Chemikalien. Aufgrund der Stabilität des entstandenen Vliesstoffes kann zudem auf Kunststoffträger, die oftmals für die Stabilisierung zum Einsatz kommen, verzichtet werden. Im Jahr 2022 gelang es, rund 40 Millionen Tuchmasken aus 50 Tonnen holzbasierten VEOCELTM Fasern herzustellen. Die 25 Tonnen an damit eingespartem PET und PP sind ein großer Schritt in Richtung Müllvermeidung“, sagt Kerstin Knorr, Leitung Marketing bei Norafin.

Source:

Lenzing Gruppe / movea marketing GmbH & Co KG

ACTIVEYARN book (c) Suedwolle Group
05.12.2023

Suedwolle Group: New ACTIVEYARN® collection

Suedwolle Group introduces ACTIVEYARN®, the company’s first seasonless corporate collection: ACTIVEYARN® is composed of a selection of weaving, flat and circular knitting, hosiery and technical yarns, with advanced spinning technologies, wool blends and other natural and traceable fibres. It is a seasonless collection of yarns suitable for different occasions, to support everyone’s attitude and style.

This idea is expressed by the concept of “Get active”, which is not just about using Suedwolle Group’s products in sports applications, but about a new mindset, a changing perspective. By taking a fresh look at the company’s wide offer, ACTIVEYARN® provides new opportunities and inspiration to explore Suedwolle Group’s full potential in terms of technology, sustainability and innovations. It considers with a new point of view on the collections for knitting, weaving and technical uses, creating new connections among them and offering a mosaic of new possibilities and versatile combinations.

This theme of the collection and the new mindset may be represented in the concept of a “kaleidoscope”, symbol of the active change inspiring Suedwolle Group’s creativity.

Suedwolle Group introduces ACTIVEYARN®, the company’s first seasonless corporate collection: ACTIVEYARN® is composed of a selection of weaving, flat and circular knitting, hosiery and technical yarns, with advanced spinning technologies, wool blends and other natural and traceable fibres. It is a seasonless collection of yarns suitable for different occasions, to support everyone’s attitude and style.

This idea is expressed by the concept of “Get active”, which is not just about using Suedwolle Group’s products in sports applications, but about a new mindset, a changing perspective. By taking a fresh look at the company’s wide offer, ACTIVEYARN® provides new opportunities and inspiration to explore Suedwolle Group’s full potential in terms of technology, sustainability and innovations. It considers with a new point of view on the collections for knitting, weaving and technical uses, creating new connections among them and offering a mosaic of new possibilities and versatile combinations.

This theme of the collection and the new mindset may be represented in the concept of a “kaleidoscope”, symbol of the active change inspiring Suedwolle Group’s creativity.

The yarns in the ACTIVEYARN® collection embody the company’s six strategic pillars of innovation – sustainability, circularity, traceability, design, performance and technology – drivers of the entire process of design and production.

Jasmin GOTS Nm 2/48 (100% wool 19,5 μ X-CARE) is a natural, renewable and biodegradable yarn with GOTS certification that meets the company’s demand for sustainability. X-CARE, the innovative treatment by Suedwolle Group, uses eco-friendly and chlorine-free substances that make wool environmentally friendly and suitable for easy-care quality.

Tirano Betaspun® RWS FSC (41,5% wool 17,2 μ TEC RWS certified, 41,5% LENZING™Lyocell 1,4 dtex 17% polyamide filament 22 dtex GRS certified) is a fully traceable high performance yarn, suitable for sportswear and activewear.

OTW® Midway GRS Nm 2/60 (60% wool 23,5 μ X-CARE, 40% polyamide 3,3 dtex GRS certified) comes from the recycling of pre-consumer polyamide and thus is a perfect example of circular production. Suitable for weaving, it combines the added performance that comes from our OTW® patented technology applied to a high durability blend, ideal for active garments.

Wallaby Betaspun® Nm 1/60 (87,5% wool 18,4 μ TEC, 12,5% polyamide filament 22 dtex) is the result of application of latest-generation Betaspun® technology to a natural fibre like wool, allowing production of fine yarns with extra strength and abrasion resistance, ideal for seamless and wrap knitting.

Banda TEC X-Compact Nm 2/47 (100% wool 17,2 μ TEC) is a 100% natural, renewable and biodegradable yarn benefitting from the innovative X-Compact, permitting production of particularly linear yarns ideal for clean design and fabrics appropriate for today’s fashions.

Caprera GRS Nm 1/60 (45% wool 19,3 μ Non mulesed X-CARE 55% COOLMAX® EcoMade polyester 2,2 dtex GRS certified) increases the performance of the wool-based non mulesed fibre through combination with COOLMAX® EcoMade polyester. This is a material coming from recycling of post-consumer PET bottles, dyeable at low temperatures, that aids evaporation of moisture from the skin to maintain stable body temperature, enhancing the comfort of activewear and urban garments.

Source:

Suedwolle Group

Robert van de Kerkhof (c) Karl Michalski
Robert van de Kerkhof
27.11.2023

Robert van de Kerkhof joins HeiQ’s Board of Directors

HeiQ announces the appointment of Robert van de Kerkhof as Non-Executive Director, with effect from 1 January 2024 to the board of HeiQ plc and as Chairman of the Environmental, Occupation, Health & Safety and Sustainability Committee. Robert will also be appointed to the board of HeiQ AeoniQ Holding AG (in Switzerland), a subsidiary of HeiQ plc.

Robert van de Kerkhof has over 30 years of experience in general management and sustainability leadership and extensive knowledge of the textiles industry, including cellulosic fiber technology. He founded PEPPER-i2, an advisory company specializing in sustainability and circularity. Robert also serves as the Chief Sustainability Officer and as a Board Member of Lenzing AG, a position he has held since 2014. Robert will be leaving Lenzing and its Board on the 31st. December 2023.

Robert joins HEIQ AeoniQ™ with the firm belief that the novel HEIQ AeoniQ™ man-made cellulosic fibers (MMCF) are one of the most promising solutions to transform the textile industry, now the second-most polluting in the world, into one of the most sustainable, by rendering fossil fuel-based fibers like polyester obsolete.

HeiQ announces the appointment of Robert van de Kerkhof as Non-Executive Director, with effect from 1 January 2024 to the board of HeiQ plc and as Chairman of the Environmental, Occupation, Health & Safety and Sustainability Committee. Robert will also be appointed to the board of HeiQ AeoniQ Holding AG (in Switzerland), a subsidiary of HeiQ plc.

Robert van de Kerkhof has over 30 years of experience in general management and sustainability leadership and extensive knowledge of the textiles industry, including cellulosic fiber technology. He founded PEPPER-i2, an advisory company specializing in sustainability and circularity. Robert also serves as the Chief Sustainability Officer and as a Board Member of Lenzing AG, a position he has held since 2014. Robert will be leaving Lenzing and its Board on the 31st. December 2023.

Robert joins HEIQ AeoniQ™ with the firm belief that the novel HEIQ AeoniQ™ man-made cellulosic fibers (MMCF) are one of the most promising solutions to transform the textile industry, now the second-most polluting in the world, into one of the most sustainable, by rendering fossil fuel-based fibers like polyester obsolete.

Robert has also held senior positions as President of the Austrian Fiber Institute, President and Board Member of CIRFS – the European Man-made Fibres Association, and Chairman of the ReHubs Business Council for Euratex, which is the voice of the European Apparel and Textile Industry.

Source:

HeiQ

Lenzing: Fasererkennungssystem für Rückverfolgbarkeit von Schutzbekleidung (c) Lenzing Fibers (HK) Limited
20.11.2023

Lenzing: Fasererkennungssystem für Rückverfolgbarkeit von Schutzbekleidung

Die Lenzing Gruppe hat auf den wachsenden Bedarf an Transparenz und Rückverfolgbarkeit von in Schutzbekleidung verarbeiteten Materialien reagiert und setzt das Lenzing Fasererkennungssystem nun auch für die schwer entflammbaren Cellulosefasern der Marke LENZING™ FR ein. Das System ermöglicht die Identifizierung von LENZING™ FR Fasern während jeder Phase des Produktionsprozesses. Dadurch gewährleistet es eine beispiellose Rückverfolgbarkeit und zuverlässige Qualitätssicherung bei der Herstellung von Schutzbekleidung und stärkt so das Vertrauen in das Endprodukt. Getreu dem entschlossenen Einsatz zur Senkung der CO2-Emissionen stellt Lenzing sicher, dass Lenzing™ FR Schutzbekleidung aus Fasern auf Modalbasis neue Maßstäbe für verantwortungsbewusste Produktionsverfahren setzt. Erhältlich sind ebenfalls von ClimatePartner zertifizierte CO2-neutrale LENZING™ FR Fasern, mit denen Lenzing auf die steigenden Nachhaltigkeitsanforderungen in der Branche reagiert.

Die Lenzing Gruppe hat auf den wachsenden Bedarf an Transparenz und Rückverfolgbarkeit von in Schutzbekleidung verarbeiteten Materialien reagiert und setzt das Lenzing Fasererkennungssystem nun auch für die schwer entflammbaren Cellulosefasern der Marke LENZING™ FR ein. Das System ermöglicht die Identifizierung von LENZING™ FR Fasern während jeder Phase des Produktionsprozesses. Dadurch gewährleistet es eine beispiellose Rückverfolgbarkeit und zuverlässige Qualitätssicherung bei der Herstellung von Schutzbekleidung und stärkt so das Vertrauen in das Endprodukt. Getreu dem entschlossenen Einsatz zur Senkung der CO2-Emissionen stellt Lenzing sicher, dass Lenzing™ FR Schutzbekleidung aus Fasern auf Modalbasis neue Maßstäbe für verantwortungsbewusste Produktionsverfahren setzt. Erhältlich sind ebenfalls von ClimatePartner zertifizierte CO2-neutrale LENZING™ FR Fasern, mit denen Lenzing auf die steigenden Nachhaltigkeitsanforderungen in der Branche reagiert.

Das Fasererkennungssystem stärkt Vertrauen in die Lieferkette
Die Fasern der Marke LENZING™ FR werden aus dem nachwachsenden Rohstoff Holz gefertigt, der im Einklang mit den strengen Richtlinien der Policy für Holz und Zellstoff von Lenzing aus kontrollierten und zertifizierten Wäldern in Österreich und Zentraleuropa bezogen wird. Als eines der weltweit ältesten und erfahrensten Unternehmen der Branche sorgt Lenzing für Transparenz in der Lieferkette, indem die Rückverfolgbarkeit der von Lenzing hergestellten Cellulosefasern sichergestellt wird. Das Fasererkennungssystem von Lenzing kann LENZING™ FR Fasern in jeder Phase der Produktion identifizieren und bietet dadurch eine zuverlässige Qualitätskontrolle sowie einen Echtheitsnachweis. Dank dieses Systems können wir unseren Partnern entlang der Lieferkette die Gewissheit geben, dass auch wirklich Premiumfasern von Lenzing verwendet werden, und so ihr Vertrauen in die Lieferkette stärken. LENZING™ FR Fasern sind auf Anfrage mit FSC- oder PEFC-Zertifizierung erhältlich und wurden vom US-Landwirtschaftsministeriums (USDA) als BioPreferred®-Produkt ausgezeichnet.

Senkung der CO2-Emissionen während des Produktionsprozesses
Fasern der Marke LENZING™ FR werden in einem voll integrierten Produktionsprozess gefertigt, dessen Energieverbrauch zu mehr als 83 Prozent aus erneuerbaren Energiequellen gedeckt wird. Daher fallen bei der Produktion 80 Prozent weniger Treibhausgasemissionen an als bei Standardmodalfasern1. Ebenfalls erhältlich sind von ClimatePartner zertifizierte CO2-neutrale LENZING™ FR Fasern2 – eine interessante Option für Partner in der Wertschöpfungskette, die ihren CO2-Fußabdruck verringern möchten, ohne dabei Kompromisse bei Schutz und Komfort einzugehen.

Neue Qualitätsstandards bei Schutzbekleidung
Die mit dem EU Ecolabel3 zertifizierten LENZING™ FR Fasern werden in Schutzbekleidung für Feuerwehrleute, Militär, Polizei und in der Öl- und Gas- sowie metallverarbeitende Industrien in über 100 Ländern verarbeitet. Schutzbekleidung aus Fasern der Marke LENZING™ FR setzt neue Qualitätsstandards in der Branche, denn sie ist nicht nur leicht, atmungsaktiv und weich, sondern auch bei extrem hohen Temperaturen angenehm zu tragen. Zudem entsprechen die LENZING™ FR Fasern der Definition von inhärent schwer entflammbaren und flammhemmenden Fasern, wie sie vom Europäischen Chemiefaserverband CIRFS festgelegt wurden. LENZING™ FR Fasern werden in einer großen Auswahl an Farben angeboten, wobei die Eco Color Technologie zum Einsatz kommt, die sich gegenüber herkömmlichen ressourcenintensiven Färbemethoden durch eine Energie- und Wasserersparnis von 50 Prozent und einen um 60 Prozent reduzierten CO2-Fußabdruck auszeichnet.4 Dank ihrer lang anhaltenden Farbbeständigkeit und Designflexibilität ist für LENZING™ FR Fasern keine zusätzliche Farbbehandlung durch Garnhersteller oder Stofffabriken erforderlich und auch nach mehrmaligem Waschen neigen sie weniger zum Verblassen.


1 Einzelheiten zur Zertifizierung sind auf der TENCEL™ Website verfügbar.
2 Klimaneutralität wird erreicht, indem CO2-Emissionen gemessen und reduziert und verbleibende CO2-Emissionen durch die Finanzierung von Kompensationsprojekten (z. B. Aufforstungsprojekte) oder die Einlösung von CO2-Zertifikaten ausgeglichen werden. Der CO2-Fußabdruck des Produkts auf die globale Erwärmung ist demnach gleich Null.
3 Das EU Ecolabel wird von allen Mitgliedstaaten der Europäischen Union sowie von Norwegen, Liechtenstein und Island anerkannt. Das 1992 durch eine EU-Verordnung (Verordnung (EWG) Nr. 880/92) eingeführte freiwillige Label hat sich schrittweise zu einem Referenzpunkt für Verbraucher:innen entwickelt, die durch den Kauf umweltfreundlicherer Produkte und Dienstleistungen zu einer geringeren Umweltbelastung beitragen wollen.
4 Genauere Angaben zur Energie- und Wasserersparnis und zum reduzierten CO2-Fußabdruck sind in der Broschüre „Lenzing for Protective Wear“ beschrieben.

 

Lenzing relies on wind power in the fiber and pulp production (c) Lenzing AG
At the ground-breaking ceremony, from left to right: Josef Reiter (Mayor of Engelhartstetten) Thomas Östros (Vice-President of the European Investment Bank) Helga Krismer-Huber (Green Party Lower Austria LAbg) Stephan Pernkopf (Deputy Governor of Lower Austria) Leonore Gewessler (Minister for Climate Protection) Gregor Erasim (owner of WLK energy) Gerda Holzinger-Burgstaller (Chairwoman of the Management Board of Erste Bank Österreich) Bianca Flesch (Environmental Management Messer Austria GmbH) Mario Wohanka (WLK Chief Financial Officer) Christian Skilich (CTO Lenzing AG)
10.11.2023

Lenzing relies on wind power in the fiber and pulp production

The Lenzing Group has concluded a supply contract with the Austrian electricity producer WLK energy for the purchase of around 13 megawatts of wind power. Lenzing is thus not only underlining its commitment to climate protection and the energy transition, but is also making a long-term investment in a price-stable and diversified electricity supply. The contract has a term of 15 years and provides for supply from the new wind farm in Engelhartstetten from the first quarter of 2025.

The construction of the wind farm is a joint project involving several partners, including the operator and electricity supplier WLK energy, based in Untersiebenbrunn (Lower Austria). The total output of the wind farm with a total of eleven wind turbines will be around 45 megawatts. The share of around 13 megawatts, which will be produced exclusively for the needs of the Lenzing site (Upper Austria), corresponds to the average electricity requirements of around 10,000 households per year in Austria. The ground-breaking ceremony to mark the start of construction took place on November 09, 2023 with representatives from politics and business.

The Lenzing Group has concluded a supply contract with the Austrian electricity producer WLK energy for the purchase of around 13 megawatts of wind power. Lenzing is thus not only underlining its commitment to climate protection and the energy transition, but is also making a long-term investment in a price-stable and diversified electricity supply. The contract has a term of 15 years and provides for supply from the new wind farm in Engelhartstetten from the first quarter of 2025.

The construction of the wind farm is a joint project involving several partners, including the operator and electricity supplier WLK energy, based in Untersiebenbrunn (Lower Austria). The total output of the wind farm with a total of eleven wind turbines will be around 45 megawatts. The share of around 13 megawatts, which will be produced exclusively for the needs of the Lenzing site (Upper Austria), corresponds to the average electricity requirements of around 10,000 households per year in Austria. The ground-breaking ceremony to mark the start of construction took place on November 09, 2023 with representatives from politics and business.

In 2019, Lenzing was the first fiber manufacturer to set itself the goal of reducing its CO2 emissions by 50 percent by 2030 and becoming carbon-neutral by 2050. This CO2 reduction target was recognized by the Science Based Targets Initiative. In 2022, Lenzing opened Upper Austria's largest open-space photovoltaic plant together with Verbund and also signed an electricity supply contract for photovoltaic energy with the green electricity producer Enery and Energie Steiermark.

Source:

Lenzing AG

Lenzing and Södra win ITMF Award for cooperation in textile recycling (c) Lenzing AG/Leopold
Lenzing x Södra Project team
06.11.2023

Lenzing and Södra: ITMF Award for cooperation in textile recycling

  • Lenzing and Södra – a long-standing partnership for systemic change
  • International Textile Manufacturers Federation (ITMF) honored the two companies in the "International Cooperation" category
  • EU co-funded recycling project for textiles on an industrial scale

The Lenzing Group, the world’s leading supplier of specialty fibers for the textile and nonwovens industries, and the Swedish pulp producer Södra have received the ITMF Award 2023 in the category “International Cooperation” for their joint achievements in textile recycling and circular economy. The award was presented at the ITMF Annual Conference in Keqiao, China, on November 06, 2023.

  • Lenzing and Södra – a long-standing partnership for systemic change
  • International Textile Manufacturers Federation (ITMF) honored the two companies in the "International Cooperation" category
  • EU co-funded recycling project for textiles on an industrial scale

The Lenzing Group, the world’s leading supplier of specialty fibers for the textile and nonwovens industries, and the Swedish pulp producer Södra have received the ITMF Award 2023 in the category “International Cooperation” for their joint achievements in textile recycling and circular economy. The award was presented at the ITMF Annual Conference in Keqiao, China, on November 06, 2023.

The ITMF Award 2023 is given by the International Textile Manufacturers Federation (ITMF) to recognize outstanding achievements and merits in the textile sector in two categories: ”Sustainability & Innovation“ and ”International Cooperation“. Since 2021, the two pioneers have been joining forces in textile recycling, making a decisive contribution to promoting the circular economy in the fashion industry. As part of the cooperation, the companies intend to share their knowledge with each other and jointly develop processes to enable the wider use of cellulose-based used textiles on a commercial scale.

The OnceMore® pulp from Södra, which was jointly developed further by Södra and Lenzing, is subsequently used, among other things, as a raw material for the production of Lenzing fibers with REFIBRA™ technology. The OnceMore® process makes it possible to process and recycle a blend of cotton and polyester.

ITMF paid particular tribute to the joint LIFE TREATS project (Textile Recycling in Europe AT Scale)1,which was supported by an EU grant of EUR 10m under the LIFE 20222 program and aims to build a large-scale plant at Södra's Mörrum site in Sweden.

For more information on the ITMF Awards 2023, visit the ITMF website.

1 Project 101113614 — LIFE22-ENV-SE-TREATS
2 https://cinea.ec.europa.eu/programmes/life_en

Source:

Lenzing AG

03.11.2023

Lenzing implements performance program in response to lack of market recovery

  • Revenue of EUR 1.87 bn and EBITDA of EUR 219.1 mn in the first three quarters of 2023
  • Positive free cash flow of EUR 27.3 mn in the third quarter
  • Implementation of performance program focusing on positive free cash flow, strengthened sales and margin growth and sustainable cost excellence
  • Modernization and conversion of Indonesian site successfully completed – EU Ecolabel received

The anticipated recovery in markets relevant for the Lenzing Group has to date failed to materialize. The continued sharp increase in raw material and energy costs on the one hand and very subdued demand on the other had a negative impact on Lenzing’s business trends as well as on industry as a whole during the reporting period.

  • Revenue of EUR 1.87 bn and EBITDA of EUR 219.1 mn in the first three quarters of 2023
  • Positive free cash flow of EUR 27.3 mn in the third quarter
  • Implementation of performance program focusing on positive free cash flow, strengthened sales and margin growth and sustainable cost excellence
  • Modernization and conversion of Indonesian site successfully completed – EU Ecolabel received

The anticipated recovery in markets relevant for the Lenzing Group has to date failed to materialize. The continued sharp increase in raw material and energy costs on the one hand and very subdued demand on the other had a negative impact on Lenzing’s business trends as well as on industry as a whole during the reporting period.

Revenue in the first three quarters of 2023 decreased by 5.3 percent year-on-year to EUR 1.87 bn. This reduction was primarily due to lower fiber revenues, while pulp revenues were up. The earnings trend was mainly influenced by the market environment. As a consequence, earnings before interest, tax, depreciation and amortization (EBITDA) in the reporting period decreased by 16.7 percent year-on-year to EUR 219.1 mn. The net result after tax amounted to minus EUR 96.7 mn (compared with EUR 74.9 mn in the first three quarters of 2022), while earnings per share amounted to minus EUR 4.90 (compared with EUR 2.16 in the first three quarters of 2022).

Outlook
According to the IMF, a full return of the global economy to pre-pandemic growth rates appears increasingly out of reach in the coming quarters. In addition to the consequences of the pandemic and the ongoing war in Ukraine, growth is also being influenced by restrictive monetary policy and extreme weather events. The consequences of the renewed military confrontation in the Middle East are not yet foreseeable. Overall, the IMF warns of greater risks to global financial stability, and expects the growth rate to decrease to 3 percent this year and to 2.9 percent next year.

The currency environment is expected to remain volatile in the regions of relevance to Lenzing.

The general market environment is continuing to weigh on the consumer climate and on sentiment in the industries relevant to Lenzing.

In the trend-setting market for cotton, the current 2023/24 crop season is emerging as a further 1.7 mn tonnes of inventory build-up, following 1.8 mn tonnes of inventory build-up in the previous season.

Earnings visibility remains severely limited overall.

Lenzing is fully on track with the implementation of the reorganization and cost reduction program and on this basis is implementing a comprehensive performance program focused on positive free cash flow, strengthened sales and margin growth as well as sustainable cost excellence. The overarching goal is to position Lenzing even more strongly and to further increase its crisis resilience.

In structural terms, Lenzing continues to anticipate growth in demand for environmentally responsible fibers for the textile and clothing industry as well as the hygiene and medical sectors. As a consequence, Lenzing is very well positioned with its “Better Growth” strategy and plans to continue driving growth with specialty fibers as well as its sustainability goals, including the trans-formation from a linear to a circular economy model.

The successful implementation of the key projects in Thailand and Brazil as well as the investment projects in China and Indonesia will further strengthen Lenzing’s positioning in this respect.

Taking the aforementioned factors into consideration, the Lenzing Group continues to expect that EBITDA for the 2023 financial year will lie in a range between EUR 270 mn and EUR 330 mn.

Source:

Lenzing AG

22.09.2023

Lenzing with new outlook for 2023

The continued weak development of the markets relevant to Lenzing, coupled with very cautious market expectations in 2023, requires a reassessment of Lenzing AG’s macroeconomic environment.

Taking into account the current lack of market recovery, the previous earnings forecast is not expected to be achieved. The Lenzing Group is therefore adjusting its forecast for earnings development and is assuming EBITDA in a range of EUR 270 mn to EUR 330 mn for the 2023 financial year.

CEO Stephan Sielaff: “The recovery expected for the second half of the year in the markets relevant to us has not yet occurred. This makes the early measures we took all the more correct. We launched an ambitious cost reduction program back in November 2022, which delivered the expected results ahead of schedule. Building on this, we are implementing a holistic and consistent value creation program with a focus on measures to strengthen profitability and cash flow generation and to exploit the growth potential in the fiber markets through targeted sales activities.”

The continued weak development of the markets relevant to Lenzing, coupled with very cautious market expectations in 2023, requires a reassessment of Lenzing AG’s macroeconomic environment.

Taking into account the current lack of market recovery, the previous earnings forecast is not expected to be achieved. The Lenzing Group is therefore adjusting its forecast for earnings development and is assuming EBITDA in a range of EUR 270 mn to EUR 330 mn for the 2023 financial year.

CEO Stephan Sielaff: “The recovery expected for the second half of the year in the markets relevant to us has not yet occurred. This makes the early measures we took all the more correct. We launched an ambitious cost reduction program back in November 2022, which delivered the expected results ahead of schedule. Building on this, we are implementing a holistic and consistent value creation program with a focus on measures to strengthen profitability and cash flow generation and to exploit the growth potential in the fiber markets through targeted sales activities.”

The Lenzing Group will announce further details about the value creation program when it publishes its quarterly results on November 3, 2023.

Source:

Lenzing Group

22.09.2023

Lenzing receives EU Ecolabel for fiber production in Indonesia

The Lenzing Group has received certification from the internationally recognized EU Ecolabel for its fibers at the Indonesian site. This means that Lenzing fibers produced in Purwakarta (PT. South Pacific Viscose) meet high environmental standards. The product portfolio thus expands and qualifies for the production of LENZING™ ECOVERO™ brand fibers for textiles and VEOCEL™ brand fibers for nonwoven applications.

The substantial investment of EUR 100 mn to modernize the Indonesian site has enabled Lenzing to significantly reduce its specific emissions. In addition, the site recently began sourcing energy from renewable sources and is driving the conversion to biomass in line with Lenzing's goals of reducing group-wide carbon emissions per ton of product sold by 50 percent by 2030 and achieving carbon-neutral production by 2050.

The Lenzing Group has received certification from the internationally recognized EU Ecolabel for its fibers at the Indonesian site. This means that Lenzing fibers produced in Purwakarta (PT. South Pacific Viscose) meet high environmental standards. The product portfolio thus expands and qualifies for the production of LENZING™ ECOVERO™ brand fibers for textiles and VEOCEL™ brand fibers for nonwoven applications.

The substantial investment of EUR 100 mn to modernize the Indonesian site has enabled Lenzing to significantly reduce its specific emissions. In addition, the site recently began sourcing energy from renewable sources and is driving the conversion to biomass in line with Lenzing's goals of reducing group-wide carbon emissions per ton of product sold by 50 percent by 2030 and achieving carbon-neutral production by 2050.

Anthropogenic climate change is one of the most pressing problems of our time, to which both the global textile and nonwovens industries make a major contribution. LENZING™ ECOVERO™ viscose fibers (for textiles) and VEOCEL™ Viscose (for nonwovens) have been proven to cause significantly less greenhouse gas emissions and water pollution than conventional viscose. At the Indonesian site, Lenzing also plans to produce the innovative LENZING™ ECOVERO™ Black fibers in the future, which also require less energy and water in textile chain thanks to the spun-dyeing process and thus also have a lower carbon footprint in their life cycle as a textile product.

Source:

Lenzing Group

Peschici yarn Photo Südwolle
19.09.2023

Südwolle: Spring/Summer 2025 Collection

The Südwolle collection of yarns for weaving and circular knitting continues its evolutionary path based on the key concept of Responsibility. This principle guides Südwolle Group's commitment and engagement regarding all areas of business and stakeholders - the environment, the textile industry production chain, consumers, employees and the social repercussions of its business.

The intersection between these 6 areas has resulted in a collection in which the concept of seasonality is blurred, and products have a flexible, versatile use. The use of cutting-edge technology means yarns offer a high level of quality, suitable for apparel with outstanding durability, a factor that helps to reduce the environmental impact of textile waste and disposable fashion.

The Südwolle collection of yarns for weaving and circular knitting continues its evolutionary path based on the key concept of Responsibility. This principle guides Südwolle Group's commitment and engagement regarding all areas of business and stakeholders - the environment, the textile industry production chain, consumers, employees and the social repercussions of its business.

The intersection between these 6 areas has resulted in a collection in which the concept of seasonality is blurred, and products have a flexible, versatile use. The use of cutting-edge technology means yarns offer a high level of quality, suitable for apparel with outstanding durability, a factor that helps to reduce the environmental impact of textile waste and disposable fashion.

Overview of the collection
The collection is divided into 4 themes.
Natural, biodegradable or recycled fibre blends intended for crepe and crinkled fabrics are characterized by substantial twist and a high level of performance. The selection of fibres is oriented towards sustainability, with wool and silk organze combined with LENZINGTM ECOVEROTM viscose and Q-NOVA® regenerated polyamide.

Fuji crepe X-compact Nm 40/1 Z 1050 (40% wool 21.2 μ, 60% FSC certified LENZINGTM viscose EV), new this season, features a smooth look and no pilling thanks to the use of X-compact spinning technology, which produces yarns with excellent performance and durability.

When it comes to light, natural blends, wool and linen or wool, linen and silk blends follow the trend for softly fluid structures, such as the new Peschici Nm 42/1 Z 600 (53% wool 18.4 μ, 23% linen, 24% silk), with a fresh, dry handle and very current dappled effect, which results from the skilful combination of different fibres.

Contributing to a more sustainable and traceable textile production also involves attention to all fibres used. Mohair used for luxury yarns in noble fibres is strictly RMS (Responsible Mohair Standard) certified, which traces its origin, guaranteeing animal welfare and production according to responsible standards, similar to the analogous RWS (Responsible Wool Standard) used for wool. Bosforo RWS RMS Nm 32/1 Z 950 (20% wool 20.8 μ RWS, 60% FSC certified LENZINGTM viscose EV, 20% RMS Kid Mohair) is a fresh, bright yarn that is soft on the skin, suitable for trans-seasonal products, an example of careful selection of raw materials.

Among the fancy yarns, delicately animated structures predominate for naturally elegant creations, represented by Niche Nm 34/2 S 460 (42% wool 21.2 μ, 58% bourette silk), a twisted yarn in wool and bourette silk, which adds dynamism with its characteristic rough, knotty surface.

More information:
Südwolle yarn
Source:

Suedwolle Group

(c) Lenzing Gruppe
14.09.2023

Lenzing: Echtzeit-Lieferverfolgung und CO2-Visibilität

  • Die Zusammenarbeit mit project44, einem Anbieter von Supply-Chain-Lösungen, zielt darauf ab, die Transparenz und Effizienz zu steigern und gleichzeitig einen vollkommen neuen Überblick über die CO2-Emissionen bis auf Containerebene zu ermöglichen
  • Das neue System zur Echtzeit-Lieferverfolgung von Containern bietet Lösungen zur Bewältigung der Komplexität der Lieferketten in der Faserindustrie, die in den letzten Jahren deutlich zugenommen hat
  • Mit dem auf Künstliche Intelligenz, maschinellem Lernen und Predictive-Analysis-Technologie basierenden Trackingsystem stellt Lenzing erneut unter Beweis, wie sich mithilfe digitaler Technologie agile, vernetzte und nachhaltige Lieferketten gestalten lassen

Die Lenzing Gruppe hat gemeinsam mit project44, einem Anbieter von digitalen Supply-Chain-Lösungen, ein Verfahren zur Echtzeit-Lieferverfolgung von Containern eingeführt. Im Einklang mit den Nachhaltigkeitszielen von Lenzing ermöglicht das Trackingsystem den Partnern entlang der Lieferkette auch einen besseren Überblick über die CO2-Emissionen und optimiert dadurch das Kundenerlebnis.

  • Die Zusammenarbeit mit project44, einem Anbieter von Supply-Chain-Lösungen, zielt darauf ab, die Transparenz und Effizienz zu steigern und gleichzeitig einen vollkommen neuen Überblick über die CO2-Emissionen bis auf Containerebene zu ermöglichen
  • Das neue System zur Echtzeit-Lieferverfolgung von Containern bietet Lösungen zur Bewältigung der Komplexität der Lieferketten in der Faserindustrie, die in den letzten Jahren deutlich zugenommen hat
  • Mit dem auf Künstliche Intelligenz, maschinellem Lernen und Predictive-Analysis-Technologie basierenden Trackingsystem stellt Lenzing erneut unter Beweis, wie sich mithilfe digitaler Technologie agile, vernetzte und nachhaltige Lieferketten gestalten lassen

Die Lenzing Gruppe hat gemeinsam mit project44, einem Anbieter von digitalen Supply-Chain-Lösungen, ein Verfahren zur Echtzeit-Lieferverfolgung von Containern eingeführt. Im Einklang mit den Nachhaltigkeitszielen von Lenzing ermöglicht das Trackingsystem den Partnern entlang der Lieferkette auch einen besseren Überblick über die CO2-Emissionen und optimiert dadurch das Kundenerlebnis.

Um die zunehmende Komplexität der Lieferketten innerhalb der Branche zu bewältigen, hat Lenzing eine vollständig integrierte Echtzeit-Programmierschnittstelle (API) zwischen ihre SAP-Software und der Plattform von project44 eingebunden. In Kombination mit fortschrittlicher künstlicher Intelligenz (KI), GPS-Sensoren und Technologien für maschinelles Lernen kann Lenzing ihren Kunden nun genaue Echtzeit-Informationen zu den Faserbestellungen bereitstellen – vom Lieferstatus über den Standort der Container bis hin zur Verfolgung der Schiffsrouten und den voraussichtlichen Ankunftszeiten in Häfen weltweit.

Zusammenarbeit für das gemeinsame Ziel einer besseren CO2-Transparenz
Im Rahmen ihres Nachhaltigkeitsversprechens bietet Lenzing durch das Echtzeit-Sendungsverfolgungssystem ihren Partnern in der Wertschöpfungskette verbesserte Lösungen, um ihre CO2-Reduktionsziele zu erreichen. So erhalten Kunden sowohl auf Sendungs- als auch Containerebene Zugang zu Daten über Scope-3-Emissionen, die vom Global Logistics Emissions Council (GLEC) bestätigt sind. Anhand dieser Daten können Lenzing und ihre Kunden gemeinsam Ziele formulieren und Transportpläne anpassen, um die CO2-Emissionen zu reduzieren.

Das neue Lenzing System zur Echtzeit-Lieferverfolgung steht den Kunden des Unternehmens ab September weltweit zur Verfügung.

Source:

Lenzing Gruppe

31.08.2023

Lenzing's Indonesian site turns into a supplier of specialty viscose fibers

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, has made significant technical improvements to its Purwakarta site (PT. South Pacific Viscose). Lenzing has invested more than EUR 100 million since 2021 to convert existing production capacity to specialty viscose. With the imminent completion of the investment, Lenzing is in a better position to serve the strongly growing demand for specialty fibers.

Lenzing is striving for certification according to the standard of the internationally recognized EU Ecolabel1. The product portfolio would thus include LENZING™ ECOVERO™ branded fibers for textiles and VEOCEL™ branded fibers for nonwoven applications. In the course of these substantial investments, Lenzing has set the goal of significantly reducing emissions at the site. Moreover, the site started to obtain renewable grid electricity and promotes a changeover to biomass in line with Lenzing's goals of reducing carbon emissions per ton of product by 50 percent by 2030 and achieving carbon-neutral production by 2050.

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, has made significant technical improvements to its Purwakarta site (PT. South Pacific Viscose). Lenzing has invested more than EUR 100 million since 2021 to convert existing production capacity to specialty viscose. With the imminent completion of the investment, Lenzing is in a better position to serve the strongly growing demand for specialty fibers.

Lenzing is striving for certification according to the standard of the internationally recognized EU Ecolabel1. The product portfolio would thus include LENZING™ ECOVERO™ branded fibers for textiles and VEOCEL™ branded fibers for nonwoven applications. In the course of these substantial investments, Lenzing has set the goal of significantly reducing emissions at the site. Moreover, the site started to obtain renewable grid electricity and promotes a changeover to biomass in line with Lenzing's goals of reducing carbon emissions per ton of product by 50 percent by 2030 and achieving carbon-neutral production by 2050.

“Demand for specialty fibers with low environmental impacts continues to grow structurally. We see enormous growth potential in Asia in particular. Through our investments in Indonesia and also at other Lenzing sites worldwide, we are in a better position to serve this growing demand. At the same time, we continue working tirelessly to make the industries in which we operate even more sustainable and to drive the transformation of the textile business model from linear to circular,” says Stephan Sielaff, Chief Executive Officer of the Lenzing Group.

More information:
Lenzing speciality fibers indonesia
Source:

Lenzing AG