From the Sector

Fibre Extrusion Technology Ltd (FET) of Leeds, UK enjoyed a highly successful exhibition at COMPAMED 2024 in Düsseldorf. This was the first time that FET had exhibited at this leading international trade fair for the medical technology supplier sector, a reflection of the company’s growing role in the global medical sector. In 2023-24, over 60% of FET’s turnover was derived from the medical market.

“It is never certain whether a new exhibition will prove to be a successful venture until it is tested in practice” commented FET’s Managing Director Richard Slack, “but we are delighted to report that COMPAMED 2024 exceeded all expectations. In fact, we have already booked a stand for next year’s exhibition in November, albeit in a slightly different location”.

COMPAMED 2024 attracts suppliers of a comprehensive range of high-quality medical technology components, services and production equipment for the medical industry. FET’s expertise in this sector therefore proved to be a perfect fit. With almost 40 serious customer leads taken at the show from both existing and previously unidentified clients, the initial outlook is for a very successful exhibition which will be followed up by future participation at this annual event.

FET’s established expertise lies in laboratory and pilot melt spinning equipment for a vast range of applications, especially precursor materials used in high value medical devices and specialised novel fibres from exotic and difficult to process polymers. In cases where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

Central to FET’s success has always been its ability to provide customers with advanced testing facilities and equipment at its Fibre Development Centre in Leeds, complemented by unrivalled knowledge and expertise in research and production techniques.

FET has successfully processed over 100 different polymer types and its systems can melt spin resorbable polymers in multifilament, monofilament and nonwoven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes.

Autoneum has supported Renault Group in the development of Renault Emblème, a low-carbon demonstration car designed to reduce greenhouse gas emissions by 90 percent over its entire life cycle. As a key partner of the project, Autoneum further optimized the environmental performance of its sustainable Pure technologies, which were used for numerous components in the vehicle interior and exterior. Leveraging its proven expertise in the development of lightweight and fully recyclable monomaterials with a high recycled content, as well as in the areas of life cycle analysis (LCA) and product innovation, Autoneum was able to reduce the carbon footprint of its parts and contribute to a significant reduction in vehicle weight for Renault Emblème.

Increasingly stringent regulations to reduce greenhouse gas emissions on a global scale, new directives and the electrification of mobility require innovative approaches from the entire automotive industry. To support vehicle manufacturers in achieving their sustainability targets, Autoneum continuously optimizes the environmental performance of its products and processes: from further increasing the share of recycled content and the end-of-life recyclability of its lightweight technologies to reducing waste and shifting to renewable energy in its production facilities. In addition, the Company is working closely with customers and partners to validate data and products together. One of the most recent examples of such a successful collaboration is Autoneum’s contribution to Renault Emblème.

The Renault Emblème demonstration car emits 90% fewer greenhouse gases over its entire life cycle than a comparable vehicle produced today. To achieve these ambitious decarbonization targets, Renault Group assembled more than twenty suppliers from across the industry to participate in specialized projects in five different areas: eco-design, raw material selection, manufacturing, use and end of life. In addition to providing valuable expertise in the areas of LCA and product development, Autoneum’s contribution entailed the further optimization of its environmentally friendly Pure technologies, which already today are characterized by an excellent sustainability performance across the product life cycle and also include the Company’s growing portfolio of monomaterial technologies made of 100 percent polyester.

Autoneum’s innovative and lightweight materials were used for around thirty fiber-based components in the interior and exterior of Renault Emblème, including the carpet, the underbody panels and wheelhouse outer liners as well the front and rear trunk. Thanks to the high recycled content, the waste-free production process and the excellent recyclability of the materials at the end of their service life, Autoneum was able to reduce drastically the carbon footprint of the components. This outstanding achievement was made possible by further boosting the sustainability performance of existing technologies such as Ultra-Silent, Propylat PET, Hybrid-Acoustics and Autoneum’s monomaterial polyester carpet systems. In addition, the parts contributed to a weight reduction, which positively affected both the carbon footprint and the range of the electric car.

Source Fashion, Europe’s leading responsible sourcing show, has announced an inspiring line-up of keynote speakers for its upcoming event, running from 18th to 20th February 2025 at Olympia London. On Wednesday 19th February, a full day of thought-provoking sessions will be headlined by industry visionaries including All Saints Founder Stuart Trevor, award-winning social entrepreneur Safia Minney MBE, and Andrew Xeni, Founder of Nobody’s Child.
 
The sessions will explore critical themes shaping the future of fashion, from sustainability to circularity and transparency, aiming to equip visitors with actionable insights to transform their brands and business practices.
 
Session Highlights:

• The Urgency of Transparency
  • Speaker: Andrew Xeni, Founder, Nobody’s Child, Fabacus and Soreto
  • Time: 11:00 AM
  • Synopsis: As transparency becomes the cornerstone of sustainability, Andrew Xeni will discuss how brands can lead the charge in accountability and ethical operations. From unveiling supply chain practices to empowering consumers, this session highlights the role of transparency in building trust and driving meaningful change in the fashion industry.
•  A Clothing Company That Doesn’t Produce Clothes
  • Speaker: Stuart Trevor, Founder, All Saints & Stuart Trevor
  • Time: 1:30 PM
  • Synopsis: In a groundbreaking fireside chat, Stuart Trevor will showcase how his company is pioneering circularity by transforming pre-owned clothes into desirable fashion pieces. By rethinking the traditional industry model, Trevor will illustrate the potential of upcycling to combat waste and redefine sustainable style.
• Ecosystem Thinking in Fashion: Redesigning for Regeneration
  • Speaker: Safia Minney MBE
  • Time: 2:10 PM
  • Synopsis: In a dynamic panel discussion, Safia Minney will explore strategies to adopt circular and regenerative models, scale these practices, and foster collaborative supply chain solutions. Featuring contributions from experts across industries, this session is set to empower visitors with practical tools for transformative change.

 The keynote sessions will be complemented by speakers from industry-leading organisations such as John Lewis, Vivo Footwear, Pepsi Co, Kingfisher, and environmental NGO WRAP. The full programme will be revealed in the coming weeks.
 
Join the Conversation
Source Fashion 2025 invites fashion professionals, sustainability advocates, and industry leaders to connect, learn, and lead the transformation of the fashion industry.
 
As Europe’s leading responsible sourcing show, Source Fashion brings together a global community of brands, suppliers, and thought leaders to shape the future of ethical and sustainable fashion. Through cutting-edge events, expert-led sessions, and innovative showcases, Source Fashion champions transparency, circularity, and collaboration in the industry.

About Stuart Trevor
In 1983, Stuart Trevor was a finalist in the Paul Smith/Mont Blanc competition and in 1985 he won designer of the year at The Smirnoff Fashion awards “Menswear Day”. Aged 19 he became the first designer and main buyer for REISS. At 28 he founded All Saints and many of the clothes that continue to feature every week in the top 10 bestseller list of the high-street brand today, were designed by Trevor himself over 20 years ago.
 
About Safia Minney
Safia Minney, MBE, FRSA, is an award-winning social entrepreneur, consultant and advisor. Safia is recognised by the World Economic Forum as an Outstanding Social Entrepreneur and is a leading influencer and international speaker on sustainable fashion, sustainable supply chains, ethical business and climate action.
 
Safia founded REAL Sustainability CIC in 2019, to promote awareness and action for sustainable living and leadership. In 2022 REAL launched Fashion Declares – a bottom-up, industry wide movement to promote rapid action to redesign the fashion industry to operate within planetary boundaries.
 
About Andrew Xeni
Andrew Xeni is a visionary technology and retail entrepreneur. After building successful fashion manufacturing business suppling leading UK high street brands, Xeni went on to create eco-conscious 2023 Drapers Retailer of the Year (<£100m), Nobody’s Child, of which Marks and Spencer is a strategic investor and shareholder.
Merging both retail and technology, Xeni also founded award-winning retail tech companies Fabacus and Soreto.
 
As CEO of Fabacus, a DaaS (Data-as-a-Service) technology platform for revolutionising the licencing and retail industries, Xeni has established partnerships with a number of leading businesses within the sectors, including, Fanatics, UFC, Epic Games, Ubisoft and IMG, part of Endeavour.
 
This year, seeing the growing consumer demand for sustainably, Xeni pioneered the UK-first Digital Product Passport in a collaboration with between Fabacus and Nobody’s Child, in partnership with Coinbase.
 
Xeni is backed by a number of leading financial institutions, including iNovia Partners, led by former Google CFO, Patrick Pichette, as well as New Look founder, Tom Singh. In addition to managing a diverse portfolio of businesses, and sitting as Chairman for Nobody’s Child and Soreto, Xeni is an active angel investor.

In recent years, Vietnam has rapidly transformed into one of the world’s key textile producers, solidifying its position as the world’s third-ranked exporter behind China and Bangladesh. With a history rooted in silk textile craftsmanship and currently embracing wide ranging modern textile production, the country’s thriving sector offers tremendous growth prospects for both domestic and international businesses. In a bid to harness the potential in Vietnam and Southeast Asia, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will return from 26 – 28 February 2025, with a renewed focus on promoting sustainability and digital transformation.

Vietnam's textile and apparel sector comprises approximately 7,000 companies and employs over three million workers, with 80% of production capacity used for export and 20% for domestic consumption. Progress is aided by well-developed logistics networks, skilled labour and a stable political environment. As its textile industry evolves, several key trends are influencing its future direction, reflecting a growing emphasis on sustainability and technological advancement, and leading to new opportunities for exhibitors and buyers across the value chain at Vietnam’s comprehensive textile showcase.

Major trends shaping Vietnam's textile market reflected at VIATT
More Vietnamese enterprises are adopting eco-friendly materials, including organic cotton, recycled polyester, and Tencel, while numerous global brands manufacture in Vietnam, and have committed to the "Fashion Industry Charter on Climate Action", aiming to achieve net-zero carbon emissions by 2050.

To further advance sustainable initiatives in the domestic and international textile industry, VIATT 2025 will introduce Econogy Hub, a dedicated platform for innovative, eco-friendly suppliers and service providers to connect with like-minded visitors. The show’s other new Texpertise Econogy features will include the Econogy Finder, an independent verification tool to help sustainable exhibitors effectively communicate their green credentials, and Econogy Talks, the overarching category for eco-focused seminars, forums, and product presentations.

Apart from sustainability, the Vietnamese textile industry is also embracing advanced technologies in design and manufacturing. The launch of the fair’s Innovation & Digital Solutions Zone will provide a centralised platform for exhibitors to showcase innovations such as 3D printing, AI-driven design, and digital printing, which enable manufacturers to boost efficiency and customise products to meet specific market demands.

As well as the introduction of two new product zones, the India Pavilion, organised by The Cotton Textiles Export Promotion Council (TEXPROCIL), will also make its debut at VIATT 2025. Additionally, the Japan and Taiwan Pavilions have confirmed their return, with the Japan Pavilion recognised by VIATT’s visitors as a standout showcase within Southeast Asia's textile fair landscape. Overall, the fair will feature a diverse range of exhibitors across apparel, home textiles, and technical textiles, with many showcasing innovative and sustainable products.

The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) is organised by Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE), covering the entire textile industry value chain.

The Salvation Army Trading Company (SATCoL), the trading arm of The Salvation Army, has introduced a flooring reuse scheme to divert more items away from disposal and extend their useful life. The new service receives donations of excess, postproduction and end-of-season flooring from retailers in the UK, to be made available to those who need it most.
 
During these challenging times, the growing demand for support in the community is ever present. *Research shows 1.2 million people across the UK are living without flooring, 61 per cent of those are social housing tenants - Chartered Institute of Housing research 2023
 
SATCoL, have already partnered with a local authority to provide flooring for residents and are keen to work with more councils and housing associations with this innovative scheme. As the largest charity owned textiles collector in the UK, each year SATCoL diverts over 250 million items to good uses, including over 65,000 tonnes of textiles and carpet tiles from corporate properties, that would be destroyed if not repurposed.
 
Schemes like this to help reduce waste and provide cost-effective flooring to the community. And what’s more, the profits raised from the resale of the generous donations SATCoL receives is given to The Salvation Army to continue to support the great work they do across the country.
 

The Teijin Group companies Teijin Carbon America, Renegade Materials and Teijin Aramid will participate in CAMX. the largest, most comprehensive composites and advanced materials event in North America, in San Diego, USA. At the TEIJIN booth, visitors can explore innovative composite solutions and learn about the comprehensive technical support and provided services.

Teijin's diverse network of materials companies excels across various fields, ranging from high-performance carbon and aramid fibers to cutting-edge industrial textiles and revolutionary, cost-effective prepreg composite solutions. The shared commitment to quality, innovation, and environmental responsibility unites Teijin in their mission to deliver eco-friendly solutions across multiple industries and applications, including pressure vessels, aerospace, and both defense and commercial aircraft construction.

Teijin’s dedication to acquiring appropriate certifications for sustainable production and product development underscores the high level of commitment to lead in this field. In the past years, Teijin has continuously striven to minimize their carbon footprint and global impact, while also supporting customers on their own sustainability journeys. This year, Teijin Aramid achieved the EcoVadis Gold Medal recognition, placing the company in the top 5% of all companies across all industries globally and in the top 3% of all man-made fiber manufacturers worldwide.

Teijin Carbon has been awarded the ISCC Plus certification for its production in Germany and Japan and is on track to receive the same certification in the U.S. in the coming months. This accreditation allows the Teijin Carbon Group to prove to its customers sustainable products that contribute to a circular economy. Teijin Carbon is diligently working toward establishing new sustainability standards, promoting ecological innovations, and fostering partnerships for a more sustainable world.

Teijin is looking forward to engaging with customers and partners at CAMX 2024 in San Diego to discuss innovative ideas for the circular economy and recycling processes.

Teijin Carbon is one of the world's leading manufacturers of Tenax™ carbon fibers and carbon fiber-based materials, with production sites in the US, Germany, Japan and Vietnam. Teijin Carbon develops solutions for the aerospace, automotive, energy, electronics and sporting goods industries using high-performance technologies in an international environment. They work closely with their partners to create a fully circular value chain. The goal to make Teijin’s products net CO₂-free by 2050 aligns with the commitment to global society to find solutions and take action to combat it.

As a manufacturer of intermediate materials in the US, Renegade Materials is known for its product expertise and commitment to customer satisfaction. Renegade Materials distinguishes itself by merging cutting-edge materials science with advanced prepreg manufacturing and testing equipment, all meticulously controlled by rigorous quality management systems. Renegade is steadfast in their commitment to the development and largescale production of advanced, multi-functional materials that offer engineered solutions to the current composite design, usage and affordability initiatives in the aerospace industry.

Teijin Aramid is a global leader in high-performance aramid fiber, a subsidiary of the global Teijin Group. Specializing in high-performance aramid fibers, their materials are used in automotive and aerospace industries, ballistic protection and more.

John Lewis has announced a trial where customers can bring their garments, accessories and a selection of homeware back to life through an in-store repair service. To launch the trial, John Lewis and Johnsons (part of Timpson Group) are joining forces to bring their expertise for this new offering to customers.

From reviving your wedding dress, to restoring the zip on a luxury clutch or adjusting a pair of curtains, the service will offer repair and alterations, laundry, dry cleaning and more.

Launching in selected stores from 22 July, the service will accept any brand allowing customers to drop off items to be fixed, altered, cleaned or restored, and come back to collect them after they have been given a fresh lease of life for years to come.

Extending a garment’s life by just nine months can reduce its carbon, waste and water footprints by up to 30%*. Prolonging the life of clothing is a key pillar of the circular economy, and with more consumers embracing the culture of mending and repair, recent research found that more than a third of UK adults plan to increase household repairs, rather than buying new**. This is also the case with our customers, with nearly half seeing a lifespan guarantee to repair or replace any item as the most appealing added service.

The trial will launch in five John Lewis branches: Oxford, Liverpool, Cheadle, Milton Keynes and Welwyn.

John Lewis will learn what customers want during the 16 week trial - such as the type of services customers look for, type of garments most repaired and the demographics of customers seeking the repair service - in a test and learn approach.

* WRAP, Valuing Our Clothes: the cost of UK fashion
** Aviva, Ramping up: repairs, renovations and recycling

With the fully recyclable 100% polyester trunk side trim, Autoneum is putting the rear of the vehicle at the center of its efforts for a more circular economy in the automotive industry. The latest addition to Autoneum’s growing portfolio of sustainable monomaterial products made entirely from polyester is based on the existing Pure technology Propylat PET. The component demonstrates an excellent environmental performance in terms of recycled content, waste-free manufacturing and end-of-life recyclability.

New regulations such as the revised End-of-Life Vehicles Directive in Europe are accelerating the automotive industry’s transition from a linear to a circular economy. In this context, the recyclability of vehicles at the end of their service life is becoming increasingly important. This in turn raises the demand for automotive components that have an excellent environmental performance across the product life cycle and at the same time meet the highest standards of material quality and technical performance. Autoneum’s new 100% polyester trunk side trim helps customers achieve their ambitious sustainability targets while offering optimum durability, design flexibility and aesthetics.

As with Autoneum’s environmentally friendly monomaterial carpet systems, the new 100% polyester trunk side trim is fully recyclable. Production cut-offs can be reclaimed, processed and reused, ensuring a closed material loop. Thanks to Autoneum’s high-value recycling concept, the recycled fibers can also be granulated and spun into new fibers, which reduces the need for virgin raw materials and thus conserves natural resources. The carrier material is based on the lightweight Autoneum Pure technology Propylat PET and contains at least 50% recycled fibers. Like all variants of Propylat, the technology features a high proportion of recycled material and can be produced waste-free thanks to its complete vertical integration. In addition, Propylat PET consists of 100% PET and is therefore fully recyclable. The new monomaterial trunk side trim made exclusively from polyester is also available under the Autoneum Blue sustainability label. Blue products feature at least 30% recycled PET that was collected from coastal areas, thus making an important contribution to preventing plastic pollution in the oceans.

Autoneum’s sustainable concept for 100% polyester trunk components is not limited to side trim but can also be applied to tailgate and other trunk trim. Thanks to their unique material composition, the Propylatbased trunk trim parts are lightweight and sound-absorbing, thus contributing to the attenuation of tire and rear e-motor noise. In addition, their geometry can be tailored to individual customer needs while the textile surface improves the overall aesthetic of the parts and at the same time offers a high resistance to scratches. Autoneum’s eco-friendly 100% polyester trunk trim is available in Europe, North America and China.

Archroma has won awards in two categories at the Just Style 2024 Excellence Awards. It took home two coveted Innovation Excellence awards for its SUPER SYSTEMS+ solutions and AVICUERO® leather tanning process, as well as a Social Excellence award for its longstanding and holistic commitment to community engagement in Baroda, India.

The awards recognize how Archroma is driving change with innovations that advance sustainability and through initiatives that contribute to the socio-economic progress of communities near to its Baroda manufacturing plant.

Innovation Awards
Archroma was recognized for advancing sustainable manufacturing in two Just Style Excellence Awards for Innovation.

SUPER SYSTEMS+ is a comprehensive suite of solutions that addresses the textile industry's key challenges, including water consumption, greenhouse gas emissions, circularity, chemical management and compliance.

By providing end-to-end, fiber-specific solutions that enhance process efficiency and offer intelligent effects, SUPER SYSTEMS+ enables mills and brands to meet their sustainability targets as well as consumer demand for durable products with enhanced functionality and sustainability. With end-to-end solutions from pre-treatment to finishing, SUPER SYSTEMS+ can be deployed without additional investment. With future compliance in mind, the solutions also go beyond current regulations and industry standards to anticipate upcoming restrictions.

Archroma’s AVICUERO® is a system for sustainable leather tanning and dyeing. Developed in collaboration with UK-based leather technology expert Dr Leather, it is both chrome- and metal-free and yet maintains the quality and performance of traditional tanning methods. Tanners enjoy shorter processing times, eliminate the pickling process and reduce salt usage, leading to lower pollution effluent discharge loads. In addition, AVICUERO® can offer energy savings of up to 25% and CO₂ emissions reductions of up to 23% compared to traditional chrome tanning.

Social Award for Community Engagement
Archroma has also been recognized for the positive impact it is having on communities in the vicinity of Baroda through multifaceted initiatives that span early childhood development, student scholarships, agricultural education and the empowerment of women.

Archroma recently set up an Anganwadi Centre to provide a range of services in the community, including nutrition and health education and pre-school learning. It also runs a scholarship program for students in vocational training, helping to create a skilled talent pool for the region. Archroma is also collaborating with a local NGO to empower farmers with modern agricultural methods and insights.

The building of a Household Biogas Plant in Umraya village is another example of Archroma's sustainable initiatives. The conversion of manure into clean renewable energy by the plant tackles several issues, such as reducing greenhouse gas emissions and enhancing soil health. It also liberates rural women from the burden of sourcing conventional fuel sources and the health risks associated with burning dung cakes for fuel.

Archroma introduces COLOR MANAGEMENT+, an enhanced color design and development solution that helps textile and fashion brands and mills work together for improved economic and environmental sustainability.

Archroma COLOR MANAGEMENT+ incorporates the industry’s largest off-the-shelf color atlas selection, design tools and customized services for fast color selection and creation. It combines these with engineered color standards created with Archroma’s SUPER SYSTEMS+ for reduced environmental impact and consistent and accurate color reproduction.

With these end-to-end capabilities, brands and designers can focus on their color inspiration and on the required functionality and sustainability for their end article, with the assurance that their inspiration can be precisely communicated and efficiently executed at the mill.

Within COLOR MANAGEMENT+, the Color Atlas by Archroma® offers access to a collection of more than 5,700 unique colors for cotton, polyester and blends, both as a physical library and searchable online library. Designers also have the option to create custom colors.

Ahievability criteria are available for each color standard, whether in the Color Atlas or provided as an Engineered Color, at the selection phase. This includes information about the technical and economic feasibility of the selected color, along with a commitment to sustainability build on the foundation of the Zero Discharge of Hazardous Chemicals (ZDHC) Manufacturing Restricted Substances List (MRSL) Level 3.

The COLOR MANAGEMENT+ color standards provide clear color communication to mill colorists, textile technologists and quality control specialists, helping them deliver the right color faster and achieving reproducible colors across countries and mills. Clear communications can also eliminate excessive lab dipping, shorten approval times and improve first-time-approval rates.

The color standards in COLOR MANAGEMENT+ are created with Archroma’s SUPER SYSTEMS+ solutions for bulk production in mind. Offering end article-specific processing solutions, durable colors and intelligent effects, the SUPER SYSTEMS+ suite allows brands to achieve measurable environmental impact, eliminate harmful or regulated chemicals, and add value and longevity to the end product.

The solution is further supported Archroma’s ONE WAY+ Impact Calculator and Sustainability Improvement Program (SIP), and SAFE EDGE+ compliance-data platform. Global technical support is provided to help the supply chain deliver the right colors with consistency and reduced environmental impact.