From the Sector

Reset
29 results
Freudenberg showcases sustainable solutions at Techtextil 2024 (c) Freudenberg Performance Materials
Freudenberg´s sustainable carrier material for green roofs on urban buildings is made from renewable resources
15.03.2024

Freudenberg showcases sustainable solutions at Techtextil 2024

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Biocarrier for green roofs
Freudenberg is showcasing a sustainable carrier material for green roofs on urban buildings at the trade fair. The carrier is made from polylactide, i.e. from renewable resources. When filled with soil, it provides a strong foothold to root systems, enabling the growth of lightweight sedum blankets that can be rolled out to provide instant green roofs. These roofs not only help counter urban heat, they also improve stormwater management and regulate indoor temperatures.

From textile waste to padding
The company extended its circular thermal wadding product range with the release of comfortemp® HO 80xR circular, a wadding made from 70 percent recycled polyamide from discarded fishing nets, carpet flooring and industrial plastic. Because polyamide 6, also known as nylon, retains its performance characteristics after multiple recycling processes, the fibers can be used again and again to manufacture performance sporting apparel, leisurewear and luxury garments.

Packaging solutions with various sustainability benefits
Freudenberg is also showcasing products for sustainable packaging and filtration solutions. The long-lasting Evolon® technical packaging series is a substitute for disposable packaging used in the transport of sensitive industrial items such as automotive parts. The material is made from up to 85 percent recycled PET. A further highlight at Techtextil are Freudenberg’s fully bio-based solutions for manufacturing dessicant bags. The binder-free material based on bio-fibers is also industrially compostable.
In addition, the experts will be giving trade fair visitors an insight into Freudenberg’s filtration portfolio.

Source:

Freudenberg Performance Materials

19.12.2023

New sustainability label Autoneum Blue

With its new sustainability label Autoneum Blue, Autoneum combines the use of recycled materials with protecting the oceans and social responsibility. Autoneum Blue is a continuation of the LABEL blue by Borgers®, which was originally launched by Borgers Automotive. Following the acquisition of the German automotive supplier in April 2023, Autoneum has now fully integrated the label into its sustainable product portfolio.

With its new sustainability label Autoneum Blue, Autoneum combines the use of recycled materials with protecting the oceans and social responsibility. Autoneum Blue is a continuation of the LABEL blue by Borgers®, which was originally launched by Borgers Automotive. Following the acquisition of the German automotive supplier in April 2023, Autoneum has now fully integrated the label into its sustainable product portfolio.

Marine pollution has reached alarming levels in recent decades, with plastic contamination posing one of the most harmful threats to the health of the world’s largest ecosystem. In light of ever-stricter legal requirements for the environmental performance of vehicles, especially regarding the recycled content of components and their end-of-life recyclability, the reduction and recycling of plastics is also one of the key challenges for the automotive industry. Autoneum Pure, the Company’s sustainability label for technologies with an excellent sustainability performance throughout the product life cycle, is already successfully helping customers to tackle these challenges. With Autoneum Blue, Autoneum is now expanding its sustainable product portfolio with a label for components that combine the use of recycled material with protecting the oceans and social responsibility.

In order to qualify for the Autoneum Blue label, components must be based on materials that consist of at least 30% recycled PET that was collected from coastal areas within a 50-kilometer range of the water. These credentials mean the products make an important contribution to preventing plastic pollution in the oceans. In addition, the process of collecting the PET bottles must be socially respon-sible and comply with human rights, and traceable procurement of the bottle flakes must be guaran-teed. Autoneum Blue thus complements the Company’s strategic target to continuously reduce water consumption in all areas of its operations with an additional focus on preventing plastic pollution of the oceans.

Autoneum currently offers selected wheelhouse outer liners, needlepunch carpets and trunk side trim under the Blue label. In principle, however, the label could be extended to any product based on Autoneum technologies that feature recycled polyester fibers. As an addition to Autoneum’s existing fully recyclable monomaterial polyester constructions, which are characterized by waste-free production and have a significantly lower carbon footprint compared to products made from virgin fibers, Autoneum Blue presents another example of the Company’s ongoing efforts and continuous strides towards a sustainable circular economy.

Source:

Autoneum Management AG

Carbios and L’Oréal win Pioneer Award for PET recycling solution Photo: Carbios
Emmanuel Ladent (CEO Carbios, on the left) and Jacques Playe (Packaging and Development Director at L’Oréal, on the right)
15.11.2023

Carbios and L’Oréal win Pioneer Award for PET recycling solution

Carbios and L’Oréal have won the “Pioneer Awards” in the Industry category, presented by the Solar Impulse Foundation at the first World Alliance Summit. This prize was awarded to Carbios for its enzymatic PET recycling solution, labeled “Efficient Solution” by the Solar Impulse Foundation since 2019, and to L’Oréal for using this technology for the first time in a cosmetics bottle prototype. Carbios’ solution offers brands an alternative to petro-sourced plastic that helps them meet their sustainability commitments. This advancement paves the way for future applications in other sectors such as packaging, food and beverage, and textiles.

Carbios and L’Oréal have won the “Pioneer Awards” in the Industry category, presented by the Solar Impulse Foundation at the first World Alliance Summit. This prize was awarded to Carbios for its enzymatic PET recycling solution, labeled “Efficient Solution” by the Solar Impulse Foundation since 2019, and to L’Oréal for using this technology for the first time in a cosmetics bottle prototype. Carbios’ solution offers brands an alternative to petro-sourced plastic that helps them meet their sustainability commitments. This advancement paves the way for future applications in other sectors such as packaging, food and beverage, and textiles.

Carbios and L’Oréal: a long-term collaboration
Since 2017, Carbios and L’Oréal have been working together with a shared vision of accelerating the transition to a circular economy for plastic. In 2017, both companies created a Consortium to improve the recyclability and circularity of PET packaging.  Nestlé Waters, PepsiCo and Suntory Beverage & Food Europe joined this Consortium in 2019 to scale up Carbios’ innovation. The world’s first enzymatically recycled PET packaging was made in 2021 using Carbios’ biorecycling process. The world’s first PET biorecycling plant is scheduled to be commissioned in 2025. In parallel, Carbios is rolling out its technology internationally through licensing agreements.

The environmental benefits of biorecycling developed by Carbios
Recent life-cycle analyses[1] show a 57% reduction in CO2 emissions compared with the production of virgin plastic[2], and for every tonne of recycled PET produced, 1.3 tonnes of petrol are avoided. Compared with conventional recycling, enzymatic recycling is 4 times more circular (calculated according to the Ellen MacArthur Foundation’s Material Circularity Indicator). Thanks to its highly selective enzyme, optimized for efficient PET degradation, Carbios’ depolymerization process can process all types of PET waste, including colored, multilayer or textile waste that cannot be recycled using current technologies. Furthermore, the two monomers produced (PTA and MEG) make it possible to recreate recycled PET products of identical quality to virgin ones, and suitable for food contact.
 
 
[1] Database ecoinvent 3.8
[2] French scenario, taking into account the detour of 50% of PET waste from conventional end-of-life. Virgin PET: 2.53 kg CO2/kg (cradle to gate)

Source:

Carbios

Freudenberg´s comfortemp® FIBERBALL WB Series © Freudenberg Performance Materials
Freudenberg´s comfortemp® FIBERBALL WB Series
26.10.2023

Freudenberg launches sustainable, low-level BPA thermal insulation products

Freudenberg Performance Materials Apparel (Freudenberg) launches two advanced thermal insulation products made from low-level Bisphenol A (BPA) recycled PET fibers (rPET) into the global range of comfortemp®, Freudenberg’s thermal insulation brand.

The additions of DOWN FEEL WA 150LB and FIBERBALL WB 400LB to the comfortemp® global range serve as high-quality and ecologically-minded alternatives to down, enhancing the comfort and sustainability of your garments. DOWN FEEL WA 150LB is an extremely-lightweight, loose fiber thermal insulation with a super-light loft, while FIBERBALL WB 400LB uses clusters of extra-fine fibers to offer optimal breathability, maximum comfort, and minimal clumping after washing and drying.

Freudenberg Performance Materials Apparel (Freudenberg) launches two advanced thermal insulation products made from low-level Bisphenol A (BPA) recycled PET fibers (rPET) into the global range of comfortemp®, Freudenberg’s thermal insulation brand.

The additions of DOWN FEEL WA 150LB and FIBERBALL WB 400LB to the comfortemp® global range serve as high-quality and ecologically-minded alternatives to down, enhancing the comfort and sustainability of your garments. DOWN FEEL WA 150LB is an extremely-lightweight, loose fiber thermal insulation with a super-light loft, while FIBERBALL WB 400LB uses clusters of extra-fine fibers to offer optimal breathability, maximum comfort, and minimal clumping after washing and drying.

GRS-certified and OEKO-TEX® STANDARD 100 Class I certifications
Both products utilize 100% GRS-certified rPET fibers, customizable to any desired fill levels. Additionally, these new products not only comply with but significantly surpass the stringent OEKO-TEX® STANDARD 100 Class I certifications. While OEKO-TEX® categorizes low-level BPA as less than 100 parts per million (ppm), these new products contain less than 1 ppm BPA, a testament to Freudenberg’s unyielding standards.

DOWN FEEL WA 150LB and FIBERBALL WB 400LB are available globally and more low-level BPA thermal insulation options are available in Asia.

Source:

Freudenberg Performance Materials

Photo Indorama Ventures Public Company Limited
08.08.2023

Indorama Ventures almost triples PET recycling capacity in Brazil

Indorama Ventures Public Company Limited, one of the world’s largest producers of recycled Polyethylene Terephthalate (PET) resin, announced the completion of the expansion of its recycling facility in Brazil, supported by a ‘Blue Loan’ from the International Finance Corporation (IFC), a member of the World Bank.

The recycling facility, located in Juiz de Fora, Minas Gerais, Brazil, is increasing its production capacity from 9 thousand tons to 25 thousand tons per year of PET made from post-consumer recycled (PET-PCR) material. The project is part of Indorama Ventures’ Vision 2030 ambition to continue building a sustainable global company, including spending $1.5 billion to increase its recycling capacity to 50 billion PET bottles per year by 2025.

PET is a unique and widely used plastic for water and soda bottles and the most recycled plastic in the world. Indorama Ventures, the world’s largest provider of recycled PET resin used to make beverage bottles, invested US$20 million to optimize its Brazil facility’s processes and acquire new equipment such as washing machines to help remove labels, grind bottles in water and reduce water consumption by 70%.

Indorama Ventures Public Company Limited, one of the world’s largest producers of recycled Polyethylene Terephthalate (PET) resin, announced the completion of the expansion of its recycling facility in Brazil, supported by a ‘Blue Loan’ from the International Finance Corporation (IFC), a member of the World Bank.

The recycling facility, located in Juiz de Fora, Minas Gerais, Brazil, is increasing its production capacity from 9 thousand tons to 25 thousand tons per year of PET made from post-consumer recycled (PET-PCR) material. The project is part of Indorama Ventures’ Vision 2030 ambition to continue building a sustainable global company, including spending $1.5 billion to increase its recycling capacity to 50 billion PET bottles per year by 2025.

PET is a unique and widely used plastic for water and soda bottles and the most recycled plastic in the world. Indorama Ventures, the world’s largest provider of recycled PET resin used to make beverage bottles, invested US$20 million to optimize its Brazil facility’s processes and acquire new equipment such as washing machines to help remove labels, grind bottles in water and reduce water consumption by 70%.

In November 2020, the IFC provided $300 million in Blue Loan funding to Indorama Ventures with the objective of increasing recycling capacity and diverting plastic waste from landfills and oceans in Thailand, Indonesia, Philippines, India, and Brazil—countries which are grappling with mismanaged waste and serious plastic waste in the environment. Blue Loan funds are certified and tracked for projects that support sustainable use of ocean resources for economic growth, improved livelihoods and jobs, and ocean ecosystem health. Indorama Ventures has secured a total US$2.4 billion in long-term sustainable financing from various financial institutions between 2018–2022 to support sustainability projects.

Source:

Indorama Ventures Public Company Limited 

Freudenberg: Sustainable microfiber solution for artificial leather applications (c) Freudenberg Performance Materials Holding GmbH
Evolon® sustainable microfiber coating substrate for artificial leather
19.07.2023

Freudenberg: Sustainable microfiber solution for artificial leather applications

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Evolon® sustainable microfiber coating substrates
Evolon® microfiber fabrics are ideal coating substrates for artificial leather applications in the shoe, furniture and car industries. They are particularly suitable as a carrier material for PU and PVC coatings. Evolon® microfiber materials have non-fraying edges, which makes converting easier and quicker. They contain 80% recycled PET from Freudenberg’s in-house bottle recycling plant. Furthermore, they are manufactured with no solvent and no chemical binder in the company’s Evolon® plant located in Colmar, France. The plant is accredited according to OEKO-TEX STeP sustainability manufacturing certification and the DETOX TO ZERO criteria. European manufacturing offers logistic benefits to European customers through shorter supply chain and transport routes.

Reinforcement material for leather goods
Manufacturers of leather goods also benefit from Evolon® microfiber when they use it as a reinforcement material for original leather. It is drapable and soft and provides optimal shaping support for leather. In addition, Evolon® materials offer important sustainability advantages for the manufacturing of luxury leather bags, such as being 100% made in Europe, eco-friendly and socially-responsible production, and the use of recycled raw materials.

Source:

Freudenberg Performance Materials Holding GmbH

(c) Autoneum
16.06.2023

Autoneum: Sustainable sound absorption for underbody shields

Silence and resource efficiency are the order of the day in the development and optimization of electric vehicles. On the one hand, ever stricter emissions regulations worldwide are increasing demand for components that reduce noise pollution while helping vehicle manufacturers meet their sustainability targets. On the other hand, the absence of noise from the combustion engine in e-cars amplifies the disruptive effects of other noise sources in the passenger compartment. With Ultra-
Silent Tune, Autoneum now presents a new lightweight and environmentally friendly technology for underbody shields that reduces tire rolling noise both outside and inside the vehicle, thus improving not only acoustic performance but also driver comfort in electric cars.

Silence and resource efficiency are the order of the day in the development and optimization of electric vehicles. On the one hand, ever stricter emissions regulations worldwide are increasing demand for components that reduce noise pollution while helping vehicle manufacturers meet their sustainability targets. On the other hand, the absence of noise from the combustion engine in e-cars amplifies the disruptive effects of other noise sources in the passenger compartment. With Ultra-
Silent Tune, Autoneum now presents a new lightweight and environmentally friendly technology for underbody shields that reduces tire rolling noise both outside and inside the vehicle, thus improving not only acoustic performance but also driver comfort in electric cars.

Autoneum's Ultra-Silent Tune technology owes its sound-absorbing performance to acoustic chambers of different shapes and sizes. The chambers are created by applying an embossed polyester foil to the side of the Ultra-Silent underbody shield facing away from the noise source: they capture the sound waves emitted by the car tires, modulate them according to their respective geometry and reflect them back onto the porous carrier material. Compared to conventional single-layer underbody shields, whose acoustic performance is mainly determined by the noise-reducing properties of the product side facing the tires, Ultra-Silent Tune exploits both sides of the component, which significantly improves its acoustic absorption. Autoneum thus makes innovative use of the proven concept of traditional chamber absorbers, reducing exterior tire rolling noise.

Moreover, Ultra-Silent Tune combines optimized acoustic performance with the sustainability benefits of Autoneum's Pure technology Ultra-Silent. In addition to the high proportion of recycled PET fibers, underbody shields made from Ultra-Silent Tune can be manufactured from 100% polyester and thus be fully recycled at the end of vehicle life. Furthermore, the thickness of the multilayer construction can be flexibly adapted to the packaging spaces of different vehicle models. Underbody shields made from Autoneum's new Ultra-Silent Tune technology are already in pre-development at various vehicle manufacturers in Europe.

Source:

Autoneum Management AG

02.06.2023

Carbios receives funding for PET biorecycling plant and R&D activities

Carbios will receive grants totaling €54 million from French State via France 2030 and Grand-Est Region to finance construction of world’s first PET biorecycling plant and accelerate R&D activities

Carbios announces that its project has been selected by the French State for funding of €30 million from the French State as part of the investment plan France 2030, and €12.5 million from the Grand-Est Region.  The implementation of this funding is conditional to the European Commission’s approval of the corresponding state aid scheme, followed by the conclusion of national aid agreements. As part of the national call for projects on “Plastics Recycling” operated by ADEME[1], Carbios’ project to finalize the industrialization of its unique PET biorecycling process has been selected. The reference plant in Longlaville in the Grand-Est region will be the world’s first PET biorecycling plant and is due for commissioning in 2025. This plant will make it possible to relocate to France the production of the two basic components of PET, PTA and MEG[2], both derived from the Carbios process.

Carbios will receive grants totaling €54 million from French State via France 2030 and Grand-Est Region to finance construction of world’s first PET biorecycling plant and accelerate R&D activities

Carbios announces that its project has been selected by the French State for funding of €30 million from the French State as part of the investment plan France 2030, and €12.5 million from the Grand-Est Region.  The implementation of this funding is conditional to the European Commission’s approval of the corresponding state aid scheme, followed by the conclusion of national aid agreements. As part of the national call for projects on “Plastics Recycling” operated by ADEME[1], Carbios’ project to finalize the industrialization of its unique PET biorecycling process has been selected. The reference plant in Longlaville in the Grand-Est region will be the world’s first PET biorecycling plant and is due for commissioning in 2025. This plant will make it possible to relocate to France the production of the two basic components of PET, PTA and MEG[2], both derived from the Carbios process.

Carbios also announces that it has been granted total funding of €11.4 million from the French State as part of France 2030, of which €8.2 million directly for Carbios (€5 million in repayable advances) and €3.2 million for its academic partners INRAE[3], INSA[4] and CNRS[5] via the TWB[6] and TBI[7] joint service and research units. This funding will enable to continue its research into the optimization and continuous improvement of Carbios’ enzymatic technologies.

The plant will secure the sales of the first volumes of recycled PET produced with Carbios’ technology, and to offer its partners recycled PET of the same quality as virgin PET. Once the necessary permits have been obtained, which should be granted by the end of 2023, in line with the announced start of construction before the end of the year, the plant is scheduled to be commissioned in 2025. This will be followed by a period of ramp-up to full capacity. The plant will have a nominal processing capacity of 50,000 tonnes of PET waste per year, equivalent to 2 billion bottles or 2.5 billion food trays.

Selection for funding by the French State through France 2030 and the Grand-Est Region complements the recent announcement of an exclusive, long-term partnership with Novozymes[8], a leader in enzyme production, one of the main aims is to ensure the supply of enzymes to Carbios’ Longlaville plant and future licensed plants. In addition, Carbios recently secured a first supply source for its future plant by winning part of the CITEO tender for the biorecycling of multilayer trays[9].


[1] The French Agency for Ecological Transition
[2] PTA = purified terephthalic acid; MEG = monoethylene glycol
[3] French National Research Institute for Agriculture, Food and the Environment
[4] French National Institute of Applied Sciences
[5] French National Center for Scientific Research
[6] Toulouse White Biotechnology – UMS INRAE 1337 / UAR CNRS 3582
[7] Toulouse Biotechnology Institute – UMR INSA/CNRS 5504 / UMR INSA/INRAE 792
[8] Cf. press release dated 12 January 2023
[9] Cf. press release published by Citeo dated 26 April 2023

More information:
Carbios biorecycling plastics France
Source:

Carbios

Graphic IVL
01.06.2023

Indorama Ventures and Carbios: MOU for PET biorecycling plant in France

Indorama Ventures Public Company Limited (IVL) and Carbios, a biotech company developing and industrializing biological solutions to reinvent the life cycle of plastic and textiles, announce the signing of a non-binding Memorandum of Understanding (MOU) to form a Joint Venture for the construction of the world’s first PET biorecycling plant in France.  

Based on and subject to the comprehensive terms set out in the MOU, Indorama Ventures plans to mobilize about €110 million for the Joint Venture in equity and non-convertible loan financing , pending final engineering documentation and final economic feasibility studies. Both parties have acknowledged their mutual support for the implementation of the project and their intent to finalize contract documentation before end 2023.

Subject to the successful performance of this first plant in France, Indorama Ventures confirms its intention to potentially expand the technology to other PET sites for future developments.

Indorama Ventures Public Company Limited (IVL) and Carbios, a biotech company developing and industrializing biological solutions to reinvent the life cycle of plastic and textiles, announce the signing of a non-binding Memorandum of Understanding (MOU) to form a Joint Venture for the construction of the world’s first PET biorecycling plant in France.  

Based on and subject to the comprehensive terms set out in the MOU, Indorama Ventures plans to mobilize about €110 million for the Joint Venture in equity and non-convertible loan financing , pending final engineering documentation and final economic feasibility studies. Both parties have acknowledged their mutual support for the implementation of the project and their intent to finalize contract documentation before end 2023.

Subject to the successful performance of this first plant in France, Indorama Ventures confirms its intention to potentially expand the technology to other PET sites for future developments.

Under the agreement signed June 1, Carbios, which filed for plant permitting in December 2022, should acquire 13ha land from Indorama Ventures’ existing PET plant at Longlaville and expects to be granted permits by Q3 2023, allowing start of construction by end of 2023 and targeted commissioning in 2025.  The land surface offers the possibility to double capacity. Pursuant to this MOU, Indorama Ventures shall ensure 100% of output repolymerization and both partners shall collaborate to secure feedstock supply.

The total capital investment for the new plant is re-estimated to be around €230 million, taking into account recent impact from inflation. Project costs shall be financed by the sums mobilized by Indorama Ventures, the French State and Grand-Est Region subsidies available for the project , and by equity capitalization of the Joint Venture by Carbios. Part of Carbios’ equity injection into the Joint Venture shall be financed by a portion of Carbios’ current cash position (i.e. €86 million as of 30 April 2023). Carbios is actively examining the best options to finance its remaining equity injection into the Joint Venture and will choose the most appropriate solution and timeline based on market conditions.

The project is part of Indorama Ventures’ Vision 2030 ambition to build on its leadership as a global sustainable chemical company. The company’s ESG commitments include spending $1.5 billion to increase its recycling capacity to 50 billion PET bottles per year by 2025 and 100 billion bottles per year by 2030. To meet these goals, Indorama Ventures, the world’s largest producer of recycled PET resin used in beverage bottles, is investing in new recycling technologies, including advanced recycling, in addition to expanding its global footprint of mechanical recycling sites, including two in France.

Carbios has developed a disruptive enzymatic depolymerization technology that enables efficient and solvent-free recycling of PET plastic and textile waste into virgin-like products with an aim to achieve true circularity. Carbios has ambitious plans to become a leading technology provider in advanced recycling of PET by 2035. After successful ongoing operations in its demonstration plant in Clermont-Ferrand in France, Carbios has been collaborating with Indorama Ventures for over a year to assess the commercial and technical feasibility of the technology. The world’s first industrial-scale enzymatic PET recycling plant at Longlaville will have a capacity to process about 50,000 tons of post-consumer PET waste per year, including waste that is not recyclable mechanically, equivalent to 2 billion PET colored bottles or 2.5 billion PET trays.

More information:
IVL Carbios biorecycling PET
Source:

IVL

Graphik Freudenberg Performance Materials
10.01.2023

Freudenberg: Technical packaging textiles with less CO2 emissions

By using a high share of recycled content in its Evolon® materials, Freudenberg Performance Materials (Freudenberg) offers technical packaging textiles with a carbon footprint decreased by 35%. An independent LCA study showed additional benefits such as energy resource savings and lower water use. Furthermore, Evolon® fabrics provide sustainability benefits over the packaging entire life cycle thanks to high end performance and durability.

By replacing virgin PET with recycled PET, the cradle-to-gate carbon footprint of Evolon® packaging textile materials decreased by 35%. This is the result of a study by an independent LCA and eco-design consultancy firm, which made a Cradle-to-Gate assessment of several Evolon® products using virgin PET or recycled PET. The study was finalized in 2022 and conducted according to the principles of ISO 14040/ ISO 14044 standards, following the recommendations of the Product Environmental Footprint and the Circular Footprint Formula.

By using a high share of recycled content in its Evolon® materials, Freudenberg Performance Materials (Freudenberg) offers technical packaging textiles with a carbon footprint decreased by 35%. An independent LCA study showed additional benefits such as energy resource savings and lower water use. Furthermore, Evolon® fabrics provide sustainability benefits over the packaging entire life cycle thanks to high end performance and durability.

By replacing virgin PET with recycled PET, the cradle-to-gate carbon footprint of Evolon® packaging textile materials decreased by 35%. This is the result of a study by an independent LCA and eco-design consultancy firm, which made a Cradle-to-Gate assessment of several Evolon® products using virgin PET or recycled PET. The study was finalized in 2022 and conducted according to the principles of ISO 14040/ ISO 14044 standards, following the recommendations of the Product Environmental Footprint and the Circular Footprint Formula.

Evolon® microfilament textiles have a small carbon footprint because their manufacturing process uses low CO2 energy sources. The fabrics are lightweight and can be reused throughout entire production programs, e.g. of a car model when it is about the automotive industry. Furthermore, the new Evolon® RE fabrics contain up to 85% of recycled PET which is produced in-house out of post-consumer PET bottles.

Evolon® textiles are suitable for reusable technical packaging, which eliminate the use of thousands of disposable packaging materials. Evolon® fabrics offer scratch-free, lint-free, high-end surface protection for molded plastic parts, painted parts and other sensitive industrial and automotive parts during transport. This contributes to lower the scrap rate of parts and provide both financial and ecological benefits. By using Evolon® reusable packaging to transport highly-sensitive parts, customers can increase their efficiency and save resources.

Source:

Freudenberg Performance Materials

28.11.2022

Autoneum introduces fully recyclable polyester carpet systems

Automotive carpets are typically multi-layered systems that can be challenging to recycle. By introducing a carpet made of 100% polyester, Autoneum now opens up new opportunities for vehicle manufacturers to meet their sustainability targets. The innovative carpet systems are fully recyclable, thus paving the way for an improved and more sustainable end-of-life recycling of electric vehicles. In addition, the high content of recycled PET as well as the zero waste and less energy-intensive production process further improve the carbon footprint of Autoneum’s new monomaterial needlepunch and tufted carpets.

Automotive carpets are typically multi-layered systems that can be challenging to recycle. By introducing a carpet made of 100% polyester, Autoneum now opens up new opportunities for vehicle manufacturers to meet their sustainability targets. The innovative carpet systems are fully recyclable, thus paving the way for an improved and more sustainable end-of-life recycling of electric vehicles. In addition, the high content of recycled PET as well as the zero waste and less energy-intensive production process further improve the carbon footprint of Autoneum’s new monomaterial needlepunch and tufted carpets.

Autoneum’s fully recyclable carpet systems ensure a closed material loop and are thus proof of the Company’s commitment to improving the sustainability performance of its products and manufacturing processes. The 100% polyester carpets build on the existing lightweight and particularly sustainable Autoneum Pure technologies: the carpet surface, for example, is made of Di-Light or Relive-1, while Hybrid-Acoustics PET is used for the decoupler. Thanks to Autoneum’s innovative alternative backcoating (ABC) process, which uses a thermoplastic adhesive instead of latex, the production of the new monomaterial needlepunch and tufted carpets also requires significantly less energy and no water at all.

Autoneum’s sustainable tufted carpet system made of 100% polyester is already in development for an electric model of a German vehicle manufacturer that will be available in Europe and Asia.

Source:

Autoneum

(c) Indorama Ventures Public Company Limited
22.11.2022

Indorama Ventures’ Deja™ brand named winner of the Best Sustainable Product Award

Indorama Ventures Public Company Limited (IVL) has been named winner of the Best Sustainable Product Award at the Chemical Week Sustainability Awards 2022. The award was for IVL’s DejaTM Carbon Neutral pellets, a carbon-neutral virgin polyethylene terephthalate (PET) resins, helping to reduce environmental impact.

The Deja™ brand covers carbon neutral virgin and recycled PET resins and a range of recycled PET (rPET) products, including flakes, resins, fibers, and yarns. It provides IVL’s global customers with a range of high-performance applications, including packaging, lifestyle, automotive, apparel, and medical equipment. The solutions help environmentally conscious companies meet their sustainability goals.

IVL has set ambitious 2025 and 2030 targets, which shall be met through its six-pronged decarbonization strategy, including energy transition, improving operational efficiency, circular feedstock, and future technologies. The company also has a goal to recycle 100 billion PET bottles annually by 2030.

Indorama Ventures Public Company Limited (IVL) has been named winner of the Best Sustainable Product Award at the Chemical Week Sustainability Awards 2022. The award was for IVL’s DejaTM Carbon Neutral pellets, a carbon-neutral virgin polyethylene terephthalate (PET) resins, helping to reduce environmental impact.

The Deja™ brand covers carbon neutral virgin and recycled PET resins and a range of recycled PET (rPET) products, including flakes, resins, fibers, and yarns. It provides IVL’s global customers with a range of high-performance applications, including packaging, lifestyle, automotive, apparel, and medical equipment. The solutions help environmentally conscious companies meet their sustainability goals.

IVL has set ambitious 2025 and 2030 targets, which shall be met through its six-pronged decarbonization strategy, including energy transition, improving operational efficiency, circular feedstock, and future technologies. The company also has a goal to recycle 100 billion PET bottles annually by 2030.

Chemical Week Sustainability Awards recognize the industry's best efforts in addressing financial, operational, and strategic challenges by focusing on ESG and sustainable product development. The awards were assessed by S&P Global, the world's leading credit rating agency, and a panel of experts from various companies across the chemical industry's value chain.

16.11.2022

CHT: From plastic waste to textile finishing: ARRISTAN rAIR

  • made out of recycled PET flakes and recyclable again
  • suited for finishing recycled yarns and fabrics
  • moisture management in sports and active wear

For the sustainable use of resources, the CHT Group has developed the product ARRISTAN rAIR, according to the principles of the circular economy. Here, plastic waste is converted into a valuable textile finishing product to achieve, for example, optimal moisture management in sports and active wear. Other areas of application include socks and tights in the clothing sector, filtration media and nonwovens in the technical textiles sector, and pillows and curtains in home textiles.

Since ARRISTAN rAIR is made out of recycled PET flakes, it is suited for finishing recycled yarns and fabrics which are subsequently recyclable again.

The hydrophilizing agent ARRISTAN rAIR is characterized by its fast-drying properties in combination with excellent soil release and thermoregulation. It therefore offers, especially in the field of functional textiles, optimal functionalities for high-quality and durable sportswear.

  • made out of recycled PET flakes and recyclable again
  • suited for finishing recycled yarns and fabrics
  • moisture management in sports and active wear

For the sustainable use of resources, the CHT Group has developed the product ARRISTAN rAIR, according to the principles of the circular economy. Here, plastic waste is converted into a valuable textile finishing product to achieve, for example, optimal moisture management in sports and active wear. Other areas of application include socks and tights in the clothing sector, filtration media and nonwovens in the technical textiles sector, and pillows and curtains in home textiles.

Since ARRISTAN rAIR is made out of recycled PET flakes, it is suited for finishing recycled yarns and fabrics which are subsequently recyclable again.

The hydrophilizing agent ARRISTAN rAIR is characterized by its fast-drying properties in combination with excellent soil release and thermoregulation. It therefore offers, especially in the field of functional textiles, optimal functionalities for high-quality and durable sportswear.

Source:

CHT Germany GmbH

(c) Freudenberg Performance Materials
23.08.2022

Freudenberg at Lineapelle with sustainable materials for leather goods

Freudenberg Performance Materials (Freudenberg) will be presenting Evolon® eco-friendly microfiber reinforcement material for leather goods that is manufactured in Europe with no solvent and no chemical binder at the Lineapelle international trade show for the leather industry. Another sustainability highlight is binder-free strobel material made from 100% recycled PET for the shoe industry. The company will also be showing a nonwoven crimping material that meets the increasing demands of manufacturers and consumers alike in the footwear market.

Evolon® contains 80% recycled PET. It is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria. In addition, shorter transport routes help to secure supply chains for players in the European leather goods industry.

Freudenberg Performance Materials (Freudenberg) will be presenting Evolon® eco-friendly microfiber reinforcement material for leather goods that is manufactured in Europe with no solvent and no chemical binder at the Lineapelle international trade show for the leather industry. Another sustainability highlight is binder-free strobel material made from 100% recycled PET for the shoe industry. The company will also be showing a nonwoven crimping material that meets the increasing demands of manufacturers and consumers alike in the footwear market.

Evolon® contains 80% recycled PET. It is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria. In addition, shorter transport routes help to secure supply chains for players in the European leather goods industry.

The binder-free strobel material is made from 100% recycled PET. It is GRS-certified for reliable traceability. The GRS certification recognizes the share of recycled materials in the strobel material. This allows customers to calculate the total amount of recycled material in shoes. Moreover, the mono-component material itself is fully recyclable. In terms of performance, the material is lightweight and also demonstrates a high tensile strength.

Made from nonwoven fabric, the innovative crimping material optimally combines high permanent moldability and shape retention with flexibility and suppleness. This crimping material enables manufacturers to reduce their production costs, while consumers benefit from increased comfort. Compared to conventional knitted fabric-based crimping materials, the nonwoven crimping material offers multi-directional stretching properties, improved fitting, greater design freedom and reduced weight.

Source:

Freudenberg Performance Materials

IVL
03.08.2022

Winners of the RECO Sustainable Young Designer Competition

Indorama Ventures Public Company Limited (IVL) named the winners of ‘RECO Young Designer Competition’, Thailand's largest upcycling fashion design event, parading haute couture garments containing at least 60% recycled materials.

Eleven finalists showcased 33 handmade sustainable outfits at the 9th edition of the fashion show at IVL’s headquarters in Bangkok, using recycled PET and polyester items to craft creative fashions. Under the concept of ‘REVIVE: Start from the Street,’ RECO supports young Thai designers while raising awareness of recycling. The designs use a range of recycled materials including recycled PET yarns, discarded fabric from factories, and even repurposed safety belts.

Indorama Ventures Public Company Limited (IVL) named the winners of ‘RECO Young Designer Competition’, Thailand's largest upcycling fashion design event, parading haute couture garments containing at least 60% recycled materials.

Eleven finalists showcased 33 handmade sustainable outfits at the 9th edition of the fashion show at IVL’s headquarters in Bangkok, using recycled PET and polyester items to craft creative fashions. Under the concept of ‘REVIVE: Start from the Street,’ RECO supports young Thai designers while raising awareness of recycling. The designs use a range of recycled materials including recycled PET yarns, discarded fabric from factories, and even repurposed safety belts.

RECO awarded finalists and winners with 500,000 baht in prizes to support their careers. First prize of 125,000 baht was awarded to 23-year-old emerging furniture designer Prem Buachum for his ‘The Origin of Rebirth’ collection, using fabric recycled from post-consumer PET bottles. The first runner-up, Sathitkhun Boonmee, was awarded 75,000 baht for his ‘Remembering Your Favorite Teddy Bear’ collection, using old dolls made of polyester fibers. Second runners-up, Worameth Monthanom and Tanakorn Sritong, received 50,000 baht for their ‘Regeneration of Nature (into Spring)’ collection, using unused fabrics and discarded PET film. Napat Tansuwan, a finalist with his’ Don’t Judge’ collection, will go on to create designer merchandise for sponsor Buriram United Football Club using local weaving techniques from communities in Buriram province.

Mrs. Aradhana Lohia Sharma, Vice President at Indorama Ventures and RECO Young Designer Competition Chairperson, said, “Since 2011, RECO's ambition has been to uplift recycling and inspire people to realize the value of recyclable materials to produce great new products for daily life. We have witnessed many thoughtful initiatives on upcycling through the collections created by our talented young Thai designers. The designs this year showcase stunning wearability and innovation while using a large percentage of recycle materials. Public interest in recycling has been growing immensely, and we are grateful to strengthen the relationship with partners like Buriram United Football Club.”

“Indorama Ventures hopes this competition will be a driving force in nurturing sustainable fashion concepts and increasing the acceptance of recycled materials, especially post-consumer PET. We are proud to be a stepping-stone for our youth's design journey and our community’s sustainable future.”

Source:

IVL

(c) Freudenberg Performance Materials Holding SE & Co. KG
21.06.2022

Freudenberg endorses further products with ECO-CHECK label

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Healthcare applications
In the field of healthcare, the bio-based M 1714 wound pad with superior absorption for more challenging wounds has now been endorsed with the ECO-CHECK label. The dressing consists of a mix of bio-based fibers derived from natural sources and exhibits a smooth wound contact layer. The product has been evaluated for industrial compostability and conforms to ISO 13432.

Architectural applications
The sustainable TF 400 Eco F mesh fabric for textile architecture from Mehler Texnologies® now also bears the ECO-CHECK label. Its yarn is made of 100% recycled PET bottles and its characteristics are very similar to those of conventional mesh fabrics. In 2021, it was awarded first place by the Architectural Membrane Association (AMA) in the “product” category in recognition of its properties.

Shoes
In the shoe industry, the binder-free strobel insoles have been endorsed as particularly sustainable. They contain a high percentage of recycled green bottle flakes. Moreover, the insoles themselves are fully recyclable.

Filtration applications
The two layered, needle-punched nonwoven filter medium that has just been endorsed with the ECO-CHECK label has impressive sustainability characteristics. Made entirely of polyester, more than half the fibers consist of recycled material.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

21.06.2022

RUDOLF celebrates its 100th birthday at TECHTEXTIL

  • New product initiatives and a system solution.

In the year of its 100th birthday RUDOLF will be at TECHTEXTIL to present its latest innovations and process solutions. Since 1922, RUDOLF offers a wide portfolio of specialty chemicals aiming to increase innovation and sustainability along the entire value chain, from fiber to finish.


At TECHTEXTIL, RUDOLF will present four new product initiatives and one system solution. The Company will hold “Conscious Performance” short seminars at its booth to present them.

New product initiatives
BIO-LOGIC® - Performance products with bio-carbon at core. Textile functionality is ensured through natural, renewable raw materials that are neither chemically nor genetically modified and that are not competing as food, feed or fuel.

CYCLE-LOGIC® - A new path: the upcycling of post-consumer, disposable and non-returnable plastics into valuable textile chemistry. Recycled PET bottles are now raw material for the manufacturing of some of our textile auxiliaries without attacking new, virgin resources.

  • New product initiatives and a system solution.

In the year of its 100th birthday RUDOLF will be at TECHTEXTIL to present its latest innovations and process solutions. Since 1922, RUDOLF offers a wide portfolio of specialty chemicals aiming to increase innovation and sustainability along the entire value chain, from fiber to finish.


At TECHTEXTIL, RUDOLF will present four new product initiatives and one system solution. The Company will hold “Conscious Performance” short seminars at its booth to present them.

New product initiatives
BIO-LOGIC® - Performance products with bio-carbon at core. Textile functionality is ensured through natural, renewable raw materials that are neither chemically nor genetically modified and that are not competing as food, feed or fuel.

CYCLE-LOGIC® - A new path: the upcycling of post-consumer, disposable and non-returnable plastics into valuable textile chemistry. Recycled PET bottles are now raw material for the manufacturing of some of our textile auxiliaries without attacking new, virgin resources.

PRISTINE® - Hygiene and freshness from continuous R&D advances. RUDOLF’s new ingredient brand that groups all high-performing technologies for textile hygiene, protection and freshness.

BIONIC FINISH® ECO - An idea borrowed from Mother Nature. Based on proprietary dendrimer technology, RUDOLF presents an extended family of unique fluorine-free DWR formulations suited for different materials and designed for different applications and needs.

New system solution
ECO-LOGIC® - Two-steps process designed and managed by RUDOLF’s specialists in textile process chemistry. It simulates, analyses and measures the environmental impact of a given industrial textile process to then provide insights into the optimization of resources, costs and CO2 emissions..

Source:

RUDOLF GmbH

07.06.2022

EPTA World Pultrusion Conference 2022 explores composites sustainability

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

‘Bio-pultrusion’:  
Composites based on natural fibres offer a number of benefits, including low density and high specific strength, vibration damping, and heat insulation. The German Institutes for Textile and Fiber Research Denkendorf (DITF) are developing pultrusion processes using bio-based resins and natural fibres. Projects include the BioMat Pavilion at the University of Stuttgart, a lightweight structure which combines ‘bamboo-like’ natural fibre-based pultruded profiles with a tensile membrane.

Applications for recycled carbon fibre (rCF):
The use of rCF in composite components has the potential to reduce their cost and carbon footprint. However, it is currently used to a limited extent since manufacturers are uncertain about the technical performance of available rCF products, how to process them, and the actual benefits achievable. Fraunhofer IGCV is partnering with the Institute for Textile Technology (ITA) in the MAI ÖkoCaP project to investigate the technical, ecological and economic benefits of using rCF in different industrial applications. The results will be made available in a web-based app.

Circularity and recycling:
The European Composites Industry Association (EuCIA) is drafting a circularity roadmap for the composites industry. It has collaborated with the European Cement Association (CEMBUREAU) on a position paper for the EU Commission’s Joint Research Centre (JRC) which outlines the benefits of co-processing end-of-life composites in cement manufacturing, a recycling solution that is compliant with the EU’s Waste Framework Directive and in commercial operation in Germany. Initial studies have indicated that co-processing with composites has the potential to reduce the global warming impact of cement manufacture by up to 16%. Technologies to allow recovery of fibre and/or resin from composites are in development but a better understanding of the life cycle assessment (LCA) impact of these processes is essential. EuCIA’s ‘circularity waterfall,’ a proposed priority system for composites circularity, highlights the continued need for co-processing.

Sustainability along the value chain:
Sustainability is essential for the long-term viability of businesses. Resin manufacturer AOC’s actions to improve sustainability include programmes to reduce energy, waste and greenhouse gas emissions from operations, the development of ‘greener’ and low VOC emission resins, ensuring compliance with chemicals legislation such as REACH, and involvement in EuCIA’s waste management initiatives. Its sustainable resins portfolio includes styrene-free and low-styrene formulations and products manufactured using bio-based raw materials and recycled PET.

Source:

European Pultrusion Technology Association EPTA

Freudenberg Experts meet Sustainability (c) Freudenberg Performance Materials
Sustainable seat covers padding material by FILC
11.05.2022

Freudenberg Experts meet Sustainability

Following their merger, Freudenberg Performance Materials, Low & Bonar, Mehler Texnologies® and Filc will be presenting their innovative solutions at a joint stand for the first time at this year’s techtextil exhibition in Frankfurt. The focus is on sustainability. Among the highlights are Evolon® RE, a microfilament textile for a wide variety of applications and markets, FILFLEX, a sustainable padding material for car seat covers, and the truck tarpaulin POLYMAR® 8556 ECO CF. Customers will find the world's leading manufacturer of technical textiles at Stand C51 in Hall 12.1.

Following their merger, Freudenberg Performance Materials, Low & Bonar, Mehler Texnologies® and Filc will be presenting their innovative solutions at a joint stand for the first time at this year’s techtextil exhibition in Frankfurt. The focus is on sustainability. Among the highlights are Evolon® RE, a microfilament textile for a wide variety of applications and markets, FILFLEX, a sustainable padding material for car seat covers, and the truck tarpaulin POLYMAR® 8556 ECO CF. Customers will find the world's leading manufacturer of technical textiles at Stand C51 in Hall 12.1.

Evolon® textiles made from recycled PET
With Evolon® RE, Freudenberg Performance Materials is presenting an even more sustainable version of its high-performance microfilament textiles. Evolon® RE is manufactured from an average of 70% recycled polyester, which the company makes by cycling post-consumer PET bottles in-house. Evolon® RE products are available for various applications such as technical packaging, in weights currently ranging from 80g/sqm to 300g/sqm. For high-tech wiping, lightweight Evolon® RE is now available starting from 30g/sqm. The material meets the needs of cleaning specialists for more sustainable wiping solutions. Evolon® RE offers the same high quality and material performance as all other Evolon® textiles.

Tarpaulins made from recycled raw materials presented by Mehler Texnologies®
When it comes to tarpaulins on trucks, both protection of the transport cargo and advertising for the transport company place high demands on the material. Mehler Texnologies® tarpaulin material ranks among the premium products for truck tarpaulins. The company is a pioneer in sustainable development and is showcasing POLYMAR® 8556 ECO CF. This unique material has a 25% share of recycled raw materials in the coating mass. In addition, the material is made with 100% R-PES yarns. The input materials undergo a complex separation and filtering process.

Sustainable padding material for automotive and furniture seat covers presented by FILC
FILFLEX is a soft and flexible padding layer made from nonwovens for automotive and furniture seat covers. It prevents leather from creasing and improves the dimensional stability of the seat covers. In terms of sustainability, its benefit is its 100% PET composition, making FILFLEX easy to recycle. FILFLEX offers customers easier handling during sewing and the seat covering process. End users benefit from the high seating comfort.

01.04.2022

Carbios presents its 2021 Annual Results

  • 2021 Annual Results: First IFRS consolidated statements integrating the subsidiary Carbiolice
  • Plan to build a first industrial facility with a strong financial support from the French Government and the Grand-Est Region: site selected in France in partnership with Indorama Ventures, world leader in the production recycled PET
  • Successful commissioning of a demonstration facility in September 2021 and confirmation of the validity of the scale-up of Carbios’ enzymatic recycling technology
  • Takeover of Carbiolice and full integration in the consolidated IFRS statements since June 4th, 2021
  • Appointment of Philippe Pouletty as Chairman of the Board of Directors on April 1st, 2022
  • Appointment of Emmanuel Ladent as CEO of the Company on December 1st, 2021
  • Strengthening of Carbios’ financial structure: capital increase of €114 million with French and International investors and €30 million loan from the European Investment Bank (EIB)
  • Group’s cash position of €105 million as of December 31, 2021, which does not include the €30 million EIB loan due to be drawn down in the first half of 2022

Carbios,

  • 2021 Annual Results: First IFRS consolidated statements integrating the subsidiary Carbiolice
  • Plan to build a first industrial facility with a strong financial support from the French Government and the Grand-Est Region: site selected in France in partnership with Indorama Ventures, world leader in the production recycled PET
  • Successful commissioning of a demonstration facility in September 2021 and confirmation of the validity of the scale-up of Carbios’ enzymatic recycling technology
  • Takeover of Carbiolice and full integration in the consolidated IFRS statements since June 4th, 2021
  • Appointment of Philippe Pouletty as Chairman of the Board of Directors on April 1st, 2022
  • Appointment of Emmanuel Ladent as CEO of the Company on December 1st, 2021
  • Strengthening of Carbios’ financial structure: capital increase of €114 million with French and International investors and €30 million loan from the European Investment Bank (EIB)
  • Group’s cash position of €105 million as of December 31, 2021, which does not include the €30 million EIB loan due to be drawn down in the first half of 2022

Carbios, a pioneer in the development of enzymatic solutions dedicated to the end-of-life of plastic, announced its operating and financial results for the year 2021. The financial statements as of December 31, 2021, were approved by the Company’s Board of Directors at their meeting on March 31, 2022.

“In 2021, Carbios achieved several technical and industrial milestones testifying of the soundness and successful execution of our strategy. The excellent results obtained from our demonstration plant confirms the industrial scale-up potential of our biological technology for the recycling of PET plastics and fibers. Together with our Consortium members, we also produced the world’s first food-grade PET sample bottles produced entirely from enzymatically recycled plastics; a world first. In addition, we have strengthened our financial structure by raising a landmark €114 million in May 2021 and we have taken full control of Carbiolice in June. In line with our objectives and with a strong financial support from the French Government and the Grand-Est Region, we will soon enable France to host the world’s first industrial facility dedicated to the biological recycling of plastics. Carbios’ enzymatic process will make it possible to recycle more than 50,000 tons of PET plastic waste per year,” comments Emmanuel Ladent, CEO of Carbios. “Our priority for 2022 is to finalize the terms of our partnership with Indorama Ventures, which will host the world’s first industrial facility operating our biological recycling process at its French production site in Longlaville. This year will also be about optimizing our commercial strategy, while continuing our innovation efforts on the end-of-life of other polymers.”

Click here to for further information.

Source:

Carbios