From the Sector

Reset
155 results
21.06.2022

First comprehensive sustainable chemistry index for the textile industry

  • Bluesign announces partnership with SCTI

Bluesign has teamed up with Sustainable Chemistry for the Textile Industry (SCTITM) to develop a sustainable chemistry index that shall provide a standard communication guide for chemical suppliers, manufacturers, brands, and NGOs.

The first-of-its-kind index is intended to inspire change in the industry by making it easier for stakeholders to assess the sustainability of textile chemical products against the highest standards while safeguarding the intellectual property (IP) of participating chemical companies. IP protection is critical to ensuring ongoing investment in sustainable solutions.

Chemical products, such as dyes and textile auxiliaries, are often characterized with the attribute of “free of a certain substance”. Rather than prioritizing ingredients only, the bluesign® SYSTEM already goes beyond this. The chemicals and the production site where they were created must meet certain criteria regarding environmental performance, occupational health and safety, and product stewardship performance to be bluesign® APPROVED.

  • Bluesign announces partnership with SCTI

Bluesign has teamed up with Sustainable Chemistry for the Textile Industry (SCTITM) to develop a sustainable chemistry index that shall provide a standard communication guide for chemical suppliers, manufacturers, brands, and NGOs.

The first-of-its-kind index is intended to inspire change in the industry by making it easier for stakeholders to assess the sustainability of textile chemical products against the highest standards while safeguarding the intellectual property (IP) of participating chemical companies. IP protection is critical to ensuring ongoing investment in sustainable solutions.

Chemical products, such as dyes and textile auxiliaries, are often characterized with the attribute of “free of a certain substance”. Rather than prioritizing ingredients only, the bluesign® SYSTEM already goes beyond this. The chemicals and the production site where they were created must meet certain criteria regarding environmental performance, occupational health and safety, and product stewardship performance to be bluesign® APPROVED.

The sustainable chemistry index will be reserved for substances that offer transparency on a number of additional indicators including the chemical’s circularity viability, greenhouse gas emissions during production, and the source of the raw materials. The sustainable chemistry index will also require that the downstream use of the chemical is optimized, meaning, for example, that it promotes resource saving in textile finishing. Additionally, excellent corporate governance paired with well-defined environmental and social (ESG) goals will be a pre-condition.

SCTITM is an alliance of leading chemical companies that strives to empower the textile and leather industries to apply sustainable, state-of-the-art chemistry solutions that protect factory workers, local communities, consumers and the environment.

Bluesign will implement and manage the sustainable chemistry index as an independent authority with a holistic approach to helping companies throughout the textile supply chain improve their sustainability performance.

20.06.2022

Suominen strengthens its capabilities in sustainable products

Suominen strengthens its capabilities in sustainable products by enhancing and upgrading one of its production lines in Nakkila, Finland. The investment is made in line with Suominen’s strategy and supports company’s vision to be a frontrunner in sustainability.

“As we foresaw in our strategy the market demand in Europe has changed remarkably towards more sustainable products. With this investment we respond to the increased demand for environmentally friendly products and also enhance our operational performance in terms of safety, quality and productivity,” says Petri Helsky, President and CEO of Suominen.

The total value of the investment is approximately EUR 6 million and the investment project will be completed in the second half of 2023.

Suominen strengthens its capabilities in sustainable products by enhancing and upgrading one of its production lines in Nakkila, Finland. The investment is made in line with Suominen’s strategy and supports company’s vision to be a frontrunner in sustainability.

“As we foresaw in our strategy the market demand in Europe has changed remarkably towards more sustainable products. With this investment we respond to the increased demand for environmentally friendly products and also enhance our operational performance in terms of safety, quality and productivity,” says Petri Helsky, President and CEO of Suominen.

The total value of the investment is approximately EUR 6 million and the investment project will be completed in the second half of 2023.

More information:
Suominen Sustainability nonwovens
Source:

Suominen

19.06.2022

DyStar Celebrates 125 Years of Indigo Excellence

The story started with a huge market demand for the industrial synthesis of Indigo during the late nineteen century. The first Industrial Synthesis of Indigo, Indigo Pure BASF, was successfully manufactured and introduced into the market by BASF in July 1897. It was a significant achievement for the German Chemical Industry.

Over the years, the product has made revolutionary changes to the supply chain. New technologies enabled the transformation of Synthetic Indigo Powder application to pre-reduced DyStar® Indigo Vat 40% Solution. Being the pioneer in the market, the pre-reduced solution set an important industry milestone when it was first launched in 1998.

DyStar’s innovation remains a core catalyst in our chemistry research and development journey. When the DyStar® Indigo Vat 40% Solution was introduced, the core intelligence lies behind the benefits from Sustainability to Health and Safety. The technology transforms Indigo into its soluble Leuco form, making the Indigo dyeing process more sustainable, efficient, and stable in production. In addition, workers in Denim Mills can be assured of product safety as well.

The story started with a huge market demand for the industrial synthesis of Indigo during the late nineteen century. The first Industrial Synthesis of Indigo, Indigo Pure BASF, was successfully manufactured and introduced into the market by BASF in July 1897. It was a significant achievement for the German Chemical Industry.

Over the years, the product has made revolutionary changes to the supply chain. New technologies enabled the transformation of Synthetic Indigo Powder application to pre-reduced DyStar® Indigo Vat 40% Solution. Being the pioneer in the market, the pre-reduced solution set an important industry milestone when it was first launched in 1998.

DyStar’s innovation remains a core catalyst in our chemistry research and development journey. When the DyStar® Indigo Vat 40% Solution was introduced, the core intelligence lies behind the benefits from Sustainability to Health and Safety. The technology transforms Indigo into its soluble Leuco form, making the Indigo dyeing process more sustainable, efficient, and stable in production. In addition, workers in Denim Mills can be assured of product safety as well.

Similarly, in recent modules under Cadira® Denim, DyStar introduced the first salt-free Indigo dyeing process in history. The applied technology completely eliminates hydrosulphite in the application of Indigo.

More information:
DyStar Indigo indigo dyeing process
Source:

Dystar

Baldwin’s non-contact spray technology Texcoat G4. (Photo: Baldwin)
15.06.2022

Archroma and Baldwin to collaborate for optimized performance and resource saving in textile finishing

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Baldwin, a leading global manufacturer and supplier of precision spray systems and technology for sustainable textile manufacturing, announce a new collaboration to optimize performance and resource saving in the finishing department.

The two companies aim to support textile manufacturers in their development projects, targeting to improve their product safety, performance and functionality, while at the same time maximizing the productivity and resource utilization of the finishing application process.

Archroma and Baldwin are collaborating in multiple projects that combine Archroma’s most sustainable product innovations with Baldwin’s Texcoat G4.

TexCoat G4 is a non-contact spray technology for textile finishing and remoistening, designed to allow a controlled and optimal coverage of the exact amount of finish chemistry for reaching specific characteristics of the fabric. The system can be used to reduce water consumption by as much as 50% compared to traditional padding application processes.

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Baldwin, a leading global manufacturer and supplier of precision spray systems and technology for sustainable textile manufacturing, announce a new collaboration to optimize performance and resource saving in the finishing department.

The two companies aim to support textile manufacturers in their development projects, targeting to improve their product safety, performance and functionality, while at the same time maximizing the productivity and resource utilization of the finishing application process.

Archroma and Baldwin are collaborating in multiple projects that combine Archroma’s most sustainable product innovations with Baldwin’s Texcoat G4.

TexCoat G4 is a non-contact spray technology for textile finishing and remoistening, designed to allow a controlled and optimal coverage of the exact amount of finish chemistry for reaching specific characteristics of the fabric. The system can be used to reduce water consumption by as much as 50% compared to traditional padding application processes.

Archroma and Baldwin are currently testing Archroma’s finishing products and systems, such as the soon-to-be-launched PFC-free* Smartrepel® Hydro SR for water-based soil repellence, as well as metal and inorganic particle-free antimicrobial technologies like Sanitized T 20-19 and TH 15-14, which will be launched at the upcoming Techtextil 2022.

The first test results will be available for discussions with both partners at Techtextil at their respective booths.

(c) Borealis
10.06.2022

Borealis-Strategy 2030: Sustainability in the centre

  • Strategy and purpose affirm Borealis Group vision to be a global leader in advanced and sustainable chemicals and material solutions
  • Sustainability at the centre of all activities, supporting OMV Group’s ambition for a net zero business by 2050
  • Strong foundation supports continued geographic expansion with enhanced focus on Middle East and Asia, North America

Borealis announces the introduction of the Borealis Strategy 2030. At the core of this strategic evolution is sustainability, which is supported by the Borealis foundation of dedication to safety first, its people, innovation and technology, and performance excellence. This foundation powers continued geographic expansion and the ongoing transformation towards the circular economy. The strategy stipulates new and more ambitious sustainability targets with regard to greenhouse gas (GHG) emissions reductions, energy consumption, and the circular economy. Underlying the Borealis Strategy 2030 is an evolved purpose, “Re-inventing Essentials for Sustainable Living,” whose intent and spirit is shared across the OMV Group.*

  • Strategy and purpose affirm Borealis Group vision to be a global leader in advanced and sustainable chemicals and material solutions
  • Sustainability at the centre of all activities, supporting OMV Group’s ambition for a net zero business by 2050
  • Strong foundation supports continued geographic expansion with enhanced focus on Middle East and Asia, North America

Borealis announces the introduction of the Borealis Strategy 2030. At the core of this strategic evolution is sustainability, which is supported by the Borealis foundation of dedication to safety first, its people, innovation and technology, and performance excellence. This foundation powers continued geographic expansion and the ongoing transformation towards the circular economy. The strategy stipulates new and more ambitious sustainability targets with regard to greenhouse gas (GHG) emissions reductions, energy consumption, and the circular economy. Underlying the Borealis Strategy 2030 is an evolved purpose, “Re-inventing Essentials for Sustainable Living,” whose intent and spirit is shared across the OMV Group.*

* See attached document for more information.

Source:

Borealis / ikp

Battery Show 2022: Freudenberg presents liquid absorbers for lithium-ion battery packs (c) Freudenberg
Freudenberg battery pack liquid absorbers
18.05.2022

Freudenberg auf Battery Show 2022

  • Freudenberg presents liquid absorbers for lithium-ion battery packs

The experts from Freudenberg Performance Materials (Freudenberg) will be presenting battery pack liquid absorbers, an innovative solution that makes battery systems safer, at this year's Battery Show in Stuttgart. The absorbent pads capture and store unwanted liquids inside the packs quickly and reliably. With adjustable absorption capacity and geometries, battery pack liquid absorbers ensure long-lasting battery packs. Visitors will find Freudenberg at Stand C 36 in Hall 10 from June 28 to 30.

Battery packs are the core elements of mobile and stationary lithium-ion energy storage systems. They are used in automotive and industrial applications. The performance and lifespan of these components are largely responsible for the efficiency of the energy storage system. Moisture inside the packs, such as condensation water or leaking coolant, can considerably diminish both function and lifespan. Battery pack liquid absorbers act as a safety system: the special fleece quickly takes up condensate or coolant and stores it effectively.

  • Freudenberg presents liquid absorbers for lithium-ion battery packs

The experts from Freudenberg Performance Materials (Freudenberg) will be presenting battery pack liquid absorbers, an innovative solution that makes battery systems safer, at this year's Battery Show in Stuttgart. The absorbent pads capture and store unwanted liquids inside the packs quickly and reliably. With adjustable absorption capacity and geometries, battery pack liquid absorbers ensure long-lasting battery packs. Visitors will find Freudenberg at Stand C 36 in Hall 10 from June 28 to 30.

Battery packs are the core elements of mobile and stationary lithium-ion energy storage systems. They are used in automotive and industrial applications. The performance and lifespan of these components are largely responsible for the efficiency of the energy storage system. Moisture inside the packs, such as condensation water or leaking coolant, can considerably diminish both function and lifespan. Battery pack liquid absorbers act as a safety system: the special fleece quickly takes up condensate or coolant and stores it effectively.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

(c) Oerlikon
The new Staple Fiber Technology Center in Neumünster
13.05.2022

Oerlikon Polymer Processing Solutions at Techtextil 2022

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
Airbags have become an integral part of our everyday automotive lives. The yarns used in them are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technologies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants. And all this without any loss of function in any climate and anywhere in the world for the lifetime of the vehicle.

Buckle up!
Seat belts play a decisive role in protecting vehicle occupants. They have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments.

Invisible, but essential – road reinforcement using geotextiles
But it not just inside vehicles, but also under them, that industrial yarns reveal their strengths. Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demanding tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC – technological quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

New high-tech Staple Fiber Technology Center
Extending to around 2,100 m2, Oerlikon Neumag in Neumünster is home to one of the world’s largest staple fiber technology centers. As of now, these state-of-the-art staple fiber technologies are also available for customer-specific trials.

The focus during the planning and the design of the Technology Center was on optimizing components and processes. Here, special attention was paid to ensuring the process and production parameters in the Technology Center system could be simply and reliably transferred to production systems. Here, the fiber tape processing line is modular in design. All components can be combined with each other as required. And comprehensive set-up options supply detailed findings for the respective process for various fiber products.

The Technology Center is also equipped with two spinning positions for mono- and bi-component processes. The same round spin packs are used for both processes, characterized by excellent fiber quality and properties and meanwhile very successfully deployed in all Oerlikon Neumag production systems. Furthermore, the spinning plant is complemented by automation solutions such as spin pack scraper robots, for example.

More information:
Oerlikon Neumag Techtextil
Source:

Oerlikon

Photo: Ralph Koch für Gebr. Otto
13.05.2022

Gebr. Otto with a specialised portfolio at Techtextil 2022

Gebr. Otto is exhibiting at this year’s Techtextil from 21 to 24 June in Frankfurt. The Dietenheim-based textile company manufactures a selected range of functional high-tech yarns made, for example, of conductive, high-strength and flame-retardant fibres. Gebr. Otto’s aim at the trade fair is to make personal contacts and to expand regional technology chains. The textile solution provider is to be found, as in past years, at the BW-I joint stand in Hall 12.1 at Booth No. C80.

Gebr. Otto is exhibiting at this year’s Techtextil from 21 to 24 June in Frankfurt. The Dietenheim-based textile company manufactures a selected range of functional high-tech yarns made, for example, of conductive, high-strength and flame-retardant fibres. Gebr. Otto’s aim at the trade fair is to make personal contacts and to expand regional technology chains. The textile solution provider is to be found, as in past years, at the BW-I joint stand in Hall 12.1 at Booth No. C80.

Growing demand for technical yarns
“In the industry Gebr. Otto is mostly known for its cotton yarns and twines,” says Robin Hefter, who is in charge of technical textiles at Gebr. Otto. Cotton is the fibre that is mainly spun in the company’s spinning mill. It has been Gebr. Otto’s main line of business for over 100 years. The technical yarns that have been in the company’s product range for a good five years are, by contrast, still relative newcomers. They account for around 10 per cent of the company’s output, their share of which is on the increase. “Technical textiles have proved to be a growth sector in recent years,” Hefter explains, “and due to current political events demand for them has increased even further.”

Portfolio with a protective character
That is a reference to personal protective equipment – clothing and gloves. Gebr. Otto’s highperformance functional yarns, many of which are based on high-tech fibres, are specially designed for use in this area. In addition to flame-retardant yarns made of meta-aramid Gebr. Otto processes antistatic or conductive fibres.

As a rule many chemical fibres are easily electrically chargeable without being able to discharge by themselves due to their low moisture absorption. That is why undesired discharges occur,
maybe even the next time you shake hands. In some situations, they can be life-threatening. “Imagine the team at a pit stop in a Formula 1 race,” Robin Hefter says. “refuelling a racing car
under pressure of time. There must not be a single spark, no matter how small.” That is why Gebr. Otto adds antistatic fibres to its technical yarns. They prevent electrostatic charging and
offer safety not only to pit stop teams but also to filling station attendants. If electric conductivity is required, conductive fibres are added. And high-strength fibres are used if high or ultra-high tensile strength is required.

Colour fastness rather than safety is required when it comes to spun-dyed yarns. The fibres take up the pigments more homogeneously than if they are dyed as yarn. They are much more colourfast and fade markedly less in sunlight because the pigment particles are better enclosed in the fibre.

Source:

Gebr. Otto Baumwollfeinzwirnerei GmbH + Co. KG

SHIMA SEIKI to Exhibit at Techtextil North America 2022 (c) SHIMA SEIKI
SWG091N2
11.05.2022

SHIMA SEIKI to Exhibit at Techtextil North America 2022

Leading knit solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its U.S. subsidiary SHIMA SEIKI U.S.A. INC., will participate in the Techtextil North America exhibition in Atlanta, Georgia, U.S.A. this month. Under the theme “techKNITians—Technical Engineered Knit Applications,” the company will display its latest computerized flat knitting machines and computer graphic design system technology, aimed at promoting knitted applications in the field of technical textiles.

Leading knit solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its U.S. subsidiary SHIMA SEIKI U.S.A. INC., will participate in the Techtextil North America exhibition in Atlanta, Georgia, U.S.A. this month. Under the theme “techKNITians—Technical Engineered Knit Applications,” the company will display its latest computerized flat knitting machines and computer graphic design system technology, aimed at promoting knitted applications in the field of technical textiles.

Pioneered by SHIMA SEIKI, WHOLEGARMENT® knitting technology is capable of producing knitted items in their entirety without the need for sewing, and allows complex 3D forms to be knit such as car seat covers and interior furnishings. Selective compression allows control over placement and amount of pressure for various compression wear in sports and medical applications. The seam-free nature of WHOLEGARMENT® also ensures continuity of yarn, allowing functional yarns such as conductive yarns to wrap around the entire body without interruption, for applications in smart garments and wearable technology. Demonstrating the latest in WHOLEGARMENT® knitting technology at Techtextil will be the flagship MACH2XS machine that features the company’s original SlideNeedle™ on 4 needle beds and patented springloaded full-time sinker system. Capable of WHOLEGARMENT® knitting in all-needles, MACH2XS offers great flexibility for knitting high-quality WHOLEGARMENT® products with a seemingly endless variety of knit patterns at very high speed and efficiency, all while minimizing dependence upon labor-intensive sewing and linking. At Techtextil North America MACH2XS will be shown knitting a seam-free balaclava in one entire piece using fire-resistant yarn.

Also shown will be the SWG091N2 compact WHOLEGARMENT® knitting machine, also featuring SlideNeedle™ technology. Capable of producing small knitted items from safety gloves and compression socks to more sophisticated industrial applications such as tubular shields and harnesses, SWG091N2 offers unique solutions for the automotive, aerospace, sports, medical, safety, outdoor and other markets by knitting items in 3D without seams. SWG091N2 will be knitting fire-resistant gloves at Techtextil North America. SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design and simulation of various technical textiles. Of particular interest is its ultra-realistic simulation capability that realizes virtual sampling. When numerous variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time and cost normally associated with producing actual physical samples for each variation. The sustainability factor is also undeniable considering the amount of material normally gone to waste in the sampling stage.

10.05.2022

Stahl releases annual ESG report with focus on sustainability and transparency

Stahl, an active proponent of responsible chemistry, has published its 2021 Environment, Social, and Governance (ESG) Report. The report outlines the company’s sustainable development ambitions and its achievements over the year. It also features Stahl’s ambitious climate mitigation targets for 2030, such as the transition to more renewable feedstocks.

Stahl, an active proponent of responsible chemistry, has published its 2021 Environment, Social, and Governance (ESG) Report. The report outlines the company’s sustainable development ambitions and its achievements over the year. It also features Stahl’s ambitious climate mitigation targets for 2030, such as the transition to more renewable feedstocks.

The 2021 Stahl ESG Report is a cornerstone of Stahl’s commitment to reporting transparently on its progress toward a more sustainable chemicals value chain. This acknowledges the important role that industry must play in tackling climate change while enabling a higher quality of life for more people. A key focal point of the new report is a progress update on Stahl’s ESG Roadmap. Introduced last year, this ten-year plan outlines the company’s ESG commitments and targets for 2023 and 2030.
 
Climate action
Stahl is focused on mitigating climate change by reducing greenhouse gas (GHG) emissions from all activities over which it has influence. This includes investing in renewable energy and process efficiencies to lower the GHG emissions caused directly by Stahl’s own operations and the energy used to power them. On this point, progress was made toward the 2023 and 2030 targets in 2021, including a reduction in Scope 1 and 2 CO2 emissions of 15%. Also covered are Stahl’s indirect value-chain impacts, for example, from the raw materials it buys. Looking beyond Stahl’s direct environmental impacts and fostering greater supply-chain transparency will be vital for tackling emissions on a wider scale.

Creating responsible chemistry, together
In 2021, advances were made regarding the company’s diversity and safety targets, which are areas of continuous improvement. Stahl is committed to ensuring a safe working environment, as well as nurturing a diverse and inclusive workplace to continuously improve employee skills.

EcoVadis Gold rating
Fostering ethical behavior through exemplary leadership and governance is key to Stahl’s ambitions. Achieving the EcoVadis Gold rating was an important milestone in this respect. This well-established award reflects the company’s ongoing commitment to supply chain transparency and working with partners to improve the sustainability of its products and operations.

Source:

Stahl Holdings B.V.

(c) DOMO Chemicals
29.04.2022

DOMO Chemicals expands production capacity of TECHNYL® polyamide in China

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

The global demand for polyamide materials is currently booming at a CAGR of up to 3 percent. The adoption of new energy vehicles (including pure electric, hybrid and fuel cell vehicles) is expected to reach 45 percent globally by 2030, and automakers are increasingly using sustainable materials to make components, which are key growth drivers of the polyamide market. In addition, the demand for miniaturized circuit breakers, contactors, plug switches, and other components in the electrical and electronics and industrial consumer goods industries further opens up the application potential for polyamide materials.

DOMO Chemicals will continue to expand the capacity of its production site in Jiaxing, Zhejiang Province, which has been planned to be gradually introduced in three stages:

  • Since March 2022, an additional 6,000 tons of capacity has been made available, with the plant achieving the total capacity of 14,000 tons of PA6 from April onwards.
  • A 35,000-ton new plant in Haiyan is planned to be completed in the third quarter of 2023, in which DOMO Chemicals has invested more than 14 million euros (97 million yuan).
  • Going forward, DOMO Chemicals will further expand the plant, gradually increasing its capacity to 50,000 tons.

In addition to the expansion, the plant will also use renewable energy wherever possible, adopt advanced water and air treatment technologies to reduce water consumption and CO2 emissions, and fully comply with Health, Safety and Environmental Management System (HSE) regulations. DOMO Chemicals will improve HSE compliance continuously and work closely with the local government, while partnering with key local and global customers to accelerate innovation and development across a wide range of industries.

TECHNYL® has been committed to helping customers improve their low-carbon competitiveness since its very first year in China. It allows OEMs and component makers in the automotive, electrical & electronics, and industrial consumer goods segments to create lightweight, durable, aesthetically pleasing, smart and environmentally-friendly products.

Source:

DOMO Chemicals / Marketing Solutions NV

Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™ (c) INDA
IDEA22 Ribbon Cutting
06.04.2022

IDEA® Achievement Award honorees

  • Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™

Approximately 5,000 participants embraced the opportunity to again engage in face-to-face business meetings with global leaders in nonwovens and engineered materials at IDEA® 2022 in Miami Beach, Fla., co-located with the second FiltXPO™,  North American’s only exhibition and conference dedicated exclusively to filtration and separation.

Industry participants at IDEA® 2022,  the 21 st edition of the world’s preeminent event for nonwovens and engineered fabric professionals, expressed their business confidence through the floor exhibits and the return to face-to-face business interaction. Scott Beir, Executive Officer, CFM Global, called IDEA® 2022 “an exceptional show.”

Bob Usher, Technical Director, US Fibers, added that his company made valuable business connections. According to Rolk Kammermann, Head of Sales and Marketing, Innovative Swiss Made Nonwovens, “the size and scope of IDEA and FiltXPO have been excellent for us as both exhibitors and as visitors.”

  • Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™

Approximately 5,000 participants embraced the opportunity to again engage in face-to-face business meetings with global leaders in nonwovens and engineered materials at IDEA® 2022 in Miami Beach, Fla., co-located with the second FiltXPO™,  North American’s only exhibition and conference dedicated exclusively to filtration and separation.

Industry participants at IDEA® 2022,  the 21 st edition of the world’s preeminent event for nonwovens and engineered fabric professionals, expressed their business confidence through the floor exhibits and the return to face-to-face business interaction. Scott Beir, Executive Officer, CFM Global, called IDEA® 2022 “an exceptional show.”

Bob Usher, Technical Director, US Fibers, added that his company made valuable business connections. According to Rolk Kammermann, Head of Sales and Marketing, Innovative Swiss Made Nonwovens, “the size and scope of IDEA and FiltXPO have been excellent for us as both exhibitors and as visitors.”

Organized by INDA, IDEA® also featured five essential nonwovens training classes; market presentations from China, Asia, Europe, North America and South America; industry recognitions with the IDEA® Achievement Awards and the IDEA® Lifetime Achievement Awards; and a welcome reception celebration.

Also, organized by INDA, FiltXPO™ featured five panels of global leaders in filtration and separation for the first-ever “Summit for Global Change,” discussing societal challenges such as indoor air quality, environmental sustainability, pandemic readiness, clean water, and filtration standards.  The event also featured a 1.5-day filter media training course, and sessions highlighting filter media market trends and filtration industry statistics.  

Exhibitors and attendees noted the welcome return to meeting face-to-face among industry senior leaders participating in the three-day event.

A highlight of IDEA® was the announcement of the IDEA® Achievement Awards by INDA, in partnership with Nonwovens Industry magazine. Moderated by Rousse and Karen McIntyre, Editor, Nonwovens Industry the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability, since the previous IDEA® Exposition in 2019.

In addition, INDA presented the IDEA® 2022 Lifetime Achievement Award to Val Hollingsworth, board chair and CEO of Hollingsworth & Vose, and Nonwovens Industry presented the IDEA® Entrepreneur Achievement Award to Doug Brown, president of Biax-Fiberfilm/5K Fibres at the event.

IDEA® 2022 Achievement Awards winners:

  • IDEA®  Equipment Achievement Award – Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics, Inc.
  • IDEA®  Raw Material Achievement Award – ODOGard – Rem Brands, Inc.
  • IDEA® Short-Life Product Achievement Award – LifeSavers Wipes – LifeSavers LLC
  • IDEA® Long-Life Product Achievement Award – Nanofiber Cabin Air Filter – MANN + HUMMEL GmbH
  • IDEA®  Sustainability Advancement Award – Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
  • IDEA®  Nonwoven Product Achievement Award – HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
  • IDEA®, the Preeminent Event for the Nonwovens & Engineered Fabrics Industry, will next be held on its new 24-month schedule on April 23-25, 2024 in Miami Beach, Florida.

 

Names of the IDEA® Achievement Award honorees pictured:

Row 1, Left to right:
IDEA® Long-Life Product Achievement Award winner, Jon Nichols, MANN + HUMMEL, GmbH and Dave Rousse – Nanofiber Cabin Air Filter – MANN + HUMMEL, GmbH
IDEA®  Nonwoven Product Achievement Award winners, Pramod Shanbhag, Suominen Corporation, Karen McIntyre, Nonwovens Industry Magazine, and Avinav Nandgaonkar, HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
Row 2, left to right:
IDEA® Short-Life Product Achievement Award winner, Georgia Crawford, LifeSavers Wipes – LifeSavers LLC, and Karen McIntyre, Nonwovens Industry Magazine
IDEA® 2022 Lifetime Achievement Award winner, Val Hollingsworth, Hollingsworth & Vose, and Dave Rousse, President, INDA
IDEA®  Equipment Achievement Award winners, Uwe Peregi, Dave Rousse, and Thomas Herrmann – Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics Inc.
Row 3, left to right:
IDEA®  Raw Material Achievement Award winner, David Schneider, ODOGard – Rem Brands, Inc. and Dave Rousse, INDA
IDEA®  Sustainability Advancement Award winner, Chris Astley, and Karen McIntyre Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
IDEA® Entrepreneur Achievement Award winner, Doug Brown, Biax-Fiberfilm / 5K Fibres

Cifra selects ROICA™ for a new generation of sportswear in the name of wellness and sustainability © ROICA™
Sportswear top by Cifra containing ROICA™
06.04.2022

ROICA™ : new generation of sportswear

  • Cifra selects ROICA™ for a new generation of sportswear in the name of wellness and sustainability
  • Performance Days, Hall C1 – stand N08

Cifra, a leading Italian company in Warp Knit Seamless, has chosen ROICA™ by Asahi Kasei, an international reference for premium and smart stretch, for a new generation of clothing dedicated to wellbeing, travelwear and athleisure, made with Cifra exclusive and patented technology in the name of uniqueness and sustainability.

Innovative garments for men and women that combine fashion and function, guaranteeing optimal comfort at any time of the day. Base layers, tops, leggings, jumpsuits made with natural yarns, or recycled pre and post-consumer yarns in combination with ROICA™ EF, the first recycled stretch yarn certified Global Recycled Standard (GRS) able to complete proposals that offer design, performance and responsibility.

The design of the garments, created in Cifra's design office, combines a perfect shape with body mapping technology that creates dedicated ventilation zones for a feeling of comfort and freshness as well as an innovative aesthetic impact.

  • Cifra selects ROICA™ for a new generation of sportswear in the name of wellness and sustainability
  • Performance Days, Hall C1 – stand N08

Cifra, a leading Italian company in Warp Knit Seamless, has chosen ROICA™ by Asahi Kasei, an international reference for premium and smart stretch, for a new generation of clothing dedicated to wellbeing, travelwear and athleisure, made with Cifra exclusive and patented technology in the name of uniqueness and sustainability.

Innovative garments for men and women that combine fashion and function, guaranteeing optimal comfort at any time of the day. Base layers, tops, leggings, jumpsuits made with natural yarns, or recycled pre and post-consumer yarns in combination with ROICA™ EF, the first recycled stretch yarn certified Global Recycled Standard (GRS) able to complete proposals that offer design, performance and responsibility.

The design of the garments, created in Cifra's design office, combines a perfect shape with body mapping technology that creates dedicated ventilation zones for a feeling of comfort and freshness as well as an innovative aesthetic impact.

And when it comes to comfort, ROICA™ activates a new generation conversation linked to the demands of the contemporary consumer looking for well-being in line with the concepts of safety and healthiness emerging in all aspects of daily life. In fact, ROICA™ by Asahi Kasei is the secret stretch ingredient of the modern wardrobe, able to "activate" garments by giving comfort, beauty, quality together with responsible and certified values.

All of this translates into the synergy of development with Cifra. The products, the materials that compose them, along with the way of production and who produces them, transparency and traceability are all aspects that become an integral part of the common proposal that Cifra and ROICA™ are able to offer by joining forces.

"We firmly believe in the new generation of companies oriented towards the creation and supply of valuable products, fully respecting people and the environment, while meeting the performance required by contemporary lifestyles," says Shinichiro Haga, Senior Executive Manager of the ROICA™ Division.

RADICIGROUP
05.04.2022

RadiciGroup: A spacesuit for analogue Mars missions

  • RadiciGroup establishes a network of Italian textile excellence to create a spacesuit for analogue Mars missions
  • The Space Economy is launched in Bergamo. Mars Planet analogue astronauts to take part in the SMOPS Mars mission simulation wearing suits made of RadiciGroup yarn.

A group of companies in the Italian textile industry, headed by RadiciGroup, has created the first spacesuit for analogue simulation fully designed and engineered in Italy for the Space Medicine Operations (SMOPS) Mars mission. This endeavour was promoted and organized by Mars Planet – the Italian chapter of the Mars Society headquartered in the province of Bergamo – under the patronage of the Italian Space Agency.

The SMOPS analogue mission is mainly focused on space medicine: health monitoring of future astronauts and development of support technologies for the simulation of life in space and planet environments.

Source:

RADICIGROUP

Beaulieu International Group
24.03.2022

Beaulieu Fibres International at IDEA®22

  • Complete fibre portfolio for geotextiles, hygiene & wipes, floor coverings, automotive, upholstery, filtration, RTM and construction
  • Increasing nonwoven & engineered fabric performance with new fibres that reduce carbon footprint & support design for recycling
  • Exploring new possibilities for collaboration using BFI’s expertise, pilot line and equipment

 Beaulieu Fibres International, the largest and most differentiated European staple fibre producer, turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at IDEA®22, 28-31 March. A key priority is innovation in polyolefin and BICO fibres to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications.

  • Complete fibre portfolio for geotextiles, hygiene & wipes, floor coverings, automotive, upholstery, filtration, RTM and construction
  • Increasing nonwoven & engineered fabric performance with new fibres that reduce carbon footprint & support design for recycling
  • Exploring new possibilities for collaboration using BFI’s expertise, pilot line and equipment

 Beaulieu Fibres International, the largest and most differentiated European staple fibre producer, turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at IDEA®22, 28-31 March. A key priority is innovation in polyolefin and BICO fibres to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications.

Bio-based fibres
From June 2022, Beaulieu Fibres International will offer ISCC+ certification on mono-PP and BICO PP/PE fibres. The fibres will be offered in 1,3-8,9 dtex and will be available with all the main available finish classes (ie. hydrophilic, hydrophobic, etc.) suitable for the main carding and consolidation technologies. These drop-in solutions with no loss in quality will support customers looking to reduce reliance on virgin fossil carbon in their nonwoven and engineered fibre applications. The bio-based fibres enable customers to contribute to the transition towards a circular economy.

Achieving material savings
For customers in industrial segments like geotextiles, high-tenacity HT8 staple fibres enable customers to achieve nonwovens for construction projects with high mechanical performance but with 15% less weight. The durability of the fibres means that customers can use less raw material for a longer service lifetime, supporting more sustainable design in addition to resource reduction.
For hygiene nonwovens, the Meralux fibres provide significant sustainable design advantages. Meralux fibres deliver substantial sustainability benefits including around 55% savings in raw materials, with equivalent carbon emission savings. These emission savings are thanks to weight reduction in nonwovens with the same coverage level and also the higher recyclability of PP/PE compared to BICO materials.

Source:

Beaulieu International Group

21.03.2022

TOS+H Expo 2022 - Istanbul Chamber of Industry strengthens trade fair's position as new partner

Messe Düsseldorf GmbH and its local partner Tezulaş Fuar have signed an agreement with the Istanbul Chamber of Industry (ICI) to further strengthen the position of Turkey's leading trade fair for occupational safety and health.

In the future, the Chamber of Industry will not only contribute its expertise and industry contacts, but will also strengthen the offering of TOS+H Expo 2022, which will be held in Istanbul from May 14-17, with its own symposium. "The new partnership shows the relevance attached to the topics of health protection and occupational safety in Turkey. The cooperation with the ICI will further consolidate the leading position of TOS+H Expo in Turkey", Erhard Wienkamp, Managing Director of Messe Düsseldorf GmbH, is certain.

Messe Düsseldorf GmbH and its local partner Tezulaş Fuar have signed an agreement with the Istanbul Chamber of Industry (ICI) to further strengthen the position of Turkey's leading trade fair for occupational safety and health.

In the future, the Chamber of Industry will not only contribute its expertise and industry contacts, but will also strengthen the offering of TOS+H Expo 2022, which will be held in Istanbul from May 14-17, with its own symposium. "The new partnership shows the relevance attached to the topics of health protection and occupational safety in Turkey. The cooperation with the ICI will further consolidate the leading position of TOS+H Expo in Turkey", Erhard Wienkamp, Managing Director of Messe Düsseldorf GmbH, is certain.

"As a trade fair for occupational safety and health, TOS+H Expo brings together experts from industry and commerce. The Istanbul Chamber of Industry has set itself the goal of covering the TOS+H Expo, 4th Turkish Occupational Safety and Health Exhibition and the Occupational Health and Safety Symposium, which will be held in parallel, with currently relevant as well as forward-looking topics, thus enriching the trade fair", said a spokesperson for the Istanbul Chamber of Industry.

Symposium to be held parallel with TOS+H Expo 2022.
While TOS+H Expo, as a trade fair for occupational safety and health, networks experts from industry and commerce, the “Istanbul Chamber Of Industry Occupational Health and Safety Symposium” addresses current occupational safety and health issues and provides important impulses for establishing a prevention culture in companies in Turkey and its neighboring countries. So far, 87 national and international exhibitors from ten different countries have registered for TOS+H Expo 2022.

More information:
TOSH Messe Düsseldorf
Source:

Messe Düsseldorf

21.03.2022

OEKO-TEX® Association turns 30: Trust, Safety, Sustainability

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

The vision of the OEKO-TEX® Association, which was founded in March 1992 through a partnership between the Hohenstein Research Institute and the Austrian Textile Research Institute (OETI), is still reflected today in the organization's core values: trust, safety, and sustainability. For three decades, OEKO-TEX® has pursued the goal of building trust for companies and consumers and enabling them to make responsible decisions to protect people and the planet. "Our services bring transparency to the international textile and leather industry supply chains," says OEKO-TEX® Secretary General Georg Dieners. "They enable all stakeholders to make mindful decisions that help preserve our planet for future generations."

OEKO-TEX® market leadership
In 1992, 20 years before the United Nations announced the Sustainable Development Goals (SDGs), OEKO-TEX® launched STANDARD 100 by OEKO-TEX®, now one of the best-known labels for product safety.
"It emerged from the Schadstoffgeprüft nach ÖTN 100(tested for harmful substances according to ÖTN 100), developed by OETI in 1989 to address increasing public interest in textile ecology and health," the Austrian Textile Research Institute reminds us. The limit values and test methods on which STANDARD 100 by OEKO-TEX® is based were internationally standardized and are adapted to the latest scientific findings and legislation at least once a year - a principle that is applied to all OEKO-TEX® standards. Prof. Dr. Stefan Mecheels, the owner of the textile testing service provider Hohenstein, adds: "From the very beginning, we have considered the needs of all players in the textile value chain and continue to create solutions for current and future market requirements."

At least seven SDGs are firmly integrated into the OEKO-TEX® product portfolio. For example, Good Health & Well-Being (SDG 3) and Clean Water & Sanitation (SDG 6) are reflected in the STeP by OEKO-TEX® factory certification, and Responsible Consumption & Production (SDG 12) and Climate Action (SDG 13) are implemented through the comprehensive MADE IN GREEN by OEKO-TEX® product label.

Today, the international association consists of 17 independent research and testing institutes focused on textile and leather, with contact offices in over 60 countries. They are responsible for the joint development of the test methods and limit values in the OEKO-TEX® Standards and carry out laboratory tests and factory audits according to globally uniform specifications. These comprehensive product and process audits to ensure appropriate risk management, consumer and environmental protection, and legal compliance. With their wide-ranging research and development, the accredited OEKO-TEX® test institutes provide important insight for innovations within the textile and leather industry. They work in close cooperation with manufacturers and make a significant contribution to the development of high-quality textile and leather products at all stages of the value chain.

Mirror of social and political development
Being close to the market, and ideally, one step ahead is essential to supporting companies who are adapting to constantly changing conditions and meeting consumer expectations. Therefore, the development of OEKO-TEX® is not only a reflection of scientific knowledge but also of social and political trends. The focus is always on standardizing sustainable action and measures and making it easier for the industry to quickly and comprehensively implement sustainability goals.

Exchange with third parties is particularly valuable for this purpose. OEKO-TEX® participates in various international multi-stakeholder initiatives such as the Organization for Economic Co-operation and Development (OECD), the Partnership for Sustainable Textiles, the ZHDC (Zero Discharge of Hazardous Chemicals), and Greenpeace.
In addition to cooperation with external multi-stakeholder initiatives, the OEKO-TEX® International Advisory Board (IAB) meets annually. The core function of the IAB is to help review consistent and market-oriented Standards development proposals by the OEKO-TEX® Working Groups. In addition, OEKO-TEX® is conducting a public stakeholder consultation to gain further insights from all interest groups, which it will integrate into further development of the Standards.
Using three decades of experience for the future
The founding goal of enabling responsible choices that preserve our planet for future generations has become increasingly urgent over the past 30 years. So, OEKO-TEX® is even more resolute than ever in developing comprehensive solutions. We stand by industry and consumers as a trusted partner for the challenges ahead. In addition to the IMPACT CALCULATOR launched in January 2022, which helps STeP by OEKO-TEX® certified production facilities reduce their carbon emissions and water consumption, this summer, the association will launch a service to help companies transition to the upcoming Due Diligence Laws.

Source:

Oeko-Tex

Photo: Swisstulle AG
16.03.2022

Trevira CS at BIG Show im Oman

The Trevira CS brand was showcased on the German Pavilion at the BIG Show Oman, an international exhibition for building materials, construction equipment, and interior design, in Muscat, Oman. This year, BIG Show, which is part of Oman Design & Build Week, was held from March 14-16.

Trevira CS has been part of BIG Show for years, as it is an important meeting point for the exhibiting companies with interior designers, construction companies, and project managers. Important authorities from the Middle East as well as major hotel brands were present again this year. In the Middle East, important tenders for major projects are due this year. The main focus of the trade show will be on the hotel & catering and hospital & care sectors, for which Trevira CS fabrics are of great interest because they meet the safety requirements that are usually required by law.

The Trevira CS brand was showcased on the German Pavilion at the BIG Show Oman, an international exhibition for building materials, construction equipment, and interior design, in Muscat, Oman. This year, BIG Show, which is part of Oman Design & Build Week, was held from March 14-16.

Trevira CS has been part of BIG Show for years, as it is an important meeting point for the exhibiting companies with interior designers, construction companies, and project managers. Important authorities from the Middle East as well as major hotel brands were present again this year. In the Middle East, important tenders for major projects are due this year. The main focus of the trade show will be on the hotel & catering and hospital & care sectors, for which Trevira CS fabrics are of great interest because they meet the safety requirements that are usually required by law.

Trevira CS presented its extended brand concept that offers customers even more flexibility and also addresses sustainability. Building on to the high brand quality and performance, the recently introduced brands Trevira CS flexand Trevira CS eco offer properties and functions tailored to specific requirements. Furthermore, the Trevira CS Bioactive brand compliments the range, combining flame retardancy with antimicrobial properties. Fabrics bearing this brand meet the requirements for preventive fire protection and increased cleanliness.This brand concept is very well received by Trevira's customers. Many new flame retardant fabric developments embracing one of the Trevira CS brands were on display at BIG Show.

More information:
Trevira CS BIG
Source:

Trevira GmbH

(c) OETI
16.03.2022

OETI: Opening of sales offices in India and Bangladesh

OETI - Institute for Ecology, Technology and Innovation’ offers as a worldwide accredited and notified centre of excellence testing and certification services. The company specialises in textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality.  As a founding member of the OEKO-TEX® community (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

OETI - Institute for Ecology, Technology and Innovation’ offers as a worldwide accredited and notified centre of excellence testing and certification services. The company specialises in textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality.  As a founding member of the OEKO-TEX® community (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company TESTEX AG, OETI’s network of locations spans several continents. Recently, two more branches have been added in India and Bangladesh: Headquartered in Coimbatore/Tamil Nadu, OETI India is managed by Vignesh Amalraj, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management. The second location was recently opened in Dhaka, Bangladesh. The responsible Country Manager, Mohiuddin Sheek, is an expert in the areas of testing, auditing, certification, product safety, training, consulting and business development.

More information:
OETI
Source:

OETI

(c) FET
FET-100 Series Melt Spinning System
13.03.2022

FET gearing up for Techtextil 2022

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

A major theme to be highlighted on the FET stand is Sustainability. The FET range of laboratory and pilot extrusion lines is ideally suited for both process and end product development of sustainable materials.

FET has successfully processed almost 30 different polymer types in multifilament, monofilament and non-woven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET