From the Sector

Reset
3 results
30.07.2021

Hanf als Rohstoff textiler Innovationen

Das Thema Nachhaltigkeit ist immer wieder Bestandteil der Forschungs- und Entwicklungsarbeiten am Sächsischen Textilforschungsinstitut. In der aktuellen Ausgabe der STFI-Webtalks wird der Schwerpunkt auf nachhaltige und innovative Neuentwicklungen, im Speziellen mit dem Rohstoff Hanf gelegt.

Hanf ist abseits von Cannabis- und Seilherstellung vielseitig einsetzbar. Wie aus den Naturfasern neuartige Produkte entstehen können, wird Inhalt der Vorträge der Wissenschaftlerinnen Elke Thiele und Ina Sigmund sein. Beide präsentieren Ergebnisse von Projekten, deren Grundlage der Rohstoff Hanf bildete:

Der erste Teil der webTalks beschäftigt sich mit Biogenen Heavy Tows. Mit dem Ziel, Hochleistungsfaserverbunde aus Hanfbast zu entwickeln, wurde das Projekt gemeinsam mit den Forschungspartnern Invent GmbH Braunschweig, Technitex Sachsen GmbH, Hohenstein-Ernstthal und Hanffaser Uckermark eG, Prenzlau bearbeitet. In der Präsentation werden Möglichkeiten der Bastfaseraufbereitung zu endlosen Fasersträngen dargestellt und Varianten der Halbzeugherstellung präsentiert. Die Kennwerte der neuartigen Naturfaserverbunde bewegen sich im Bereich von Glasfaserverbunden.

Das Thema Nachhaltigkeit ist immer wieder Bestandteil der Forschungs- und Entwicklungsarbeiten am Sächsischen Textilforschungsinstitut. In der aktuellen Ausgabe der STFI-Webtalks wird der Schwerpunkt auf nachhaltige und innovative Neuentwicklungen, im Speziellen mit dem Rohstoff Hanf gelegt.

Hanf ist abseits von Cannabis- und Seilherstellung vielseitig einsetzbar. Wie aus den Naturfasern neuartige Produkte entstehen können, wird Inhalt der Vorträge der Wissenschaftlerinnen Elke Thiele und Ina Sigmund sein. Beide präsentieren Ergebnisse von Projekten, deren Grundlage der Rohstoff Hanf bildete:

Der erste Teil der webTalks beschäftigt sich mit Biogenen Heavy Tows. Mit dem Ziel, Hochleistungsfaserverbunde aus Hanfbast zu entwickeln, wurde das Projekt gemeinsam mit den Forschungspartnern Invent GmbH Braunschweig, Technitex Sachsen GmbH, Hohenstein-Ernstthal und Hanffaser Uckermark eG, Prenzlau bearbeitet. In der Präsentation werden Möglichkeiten der Bastfaseraufbereitung zu endlosen Fasersträngen dargestellt und Varianten der Halbzeugherstellung präsentiert. Die Kennwerte der neuartigen Naturfaserverbunde bewegen sich im Bereich von Glasfaserverbunden.

Anschließend werden im zweiten Teil innovative Maschenwaren aus biologisch angebautem Hanf vorgestellt, die sogenannten Lyohemp-Strickwaren. Hanf aus regionalem Anbau ist aufgrund seines Eigenschaftsprofils nur bedingt für die Textilproduktion geeignet. Stand der Technik sind Vliesstoffe als textile Halbzeuge für die Produktion von Naturfaserverstärkten Kunststoffen (NFK) für die Automobilindustrie oder Dämmstoffe. Hanfreststoffe bzw. ungenügende Faserqualitäten wurden daher als Ausgangsmaterial für die Zellstoffgewinnung herangezogen. Aus Hanfzellstoff wurde nach dem Lyocell-Verfahren eine Celluloseregeneratfaser entwickelt (Lyohemp), die sich zu feinen Garnen ausspinnen lässt.

Nächste Ausgabe der STFI webTalks am 12. August 2021 von 10:00 bis 10:45Uhr.
Die Teilnahme ist kostenlos und ohne Anmeldung über den Link möglich.

More information:
STFI Webtalks Webtalk Hanffasern
Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

VDMA member companies at ITMA ASIA + CITME (c) ITMA
07.06.2021

VDMA member companies at ITMA ASIA + CITME

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

  • Oerlikon Polymer Processing Solutions Division
  • Truetzschler Group
  • Neuenhauser
  • Saurer
  • Karl Mayer
  • Groz-Beckert
  • Herzog
  • Lenze
  • Mahlo
  • Sedo Treepoint
  • Thies

Instead of visiting the show personally, the VDMA offers a virtual trip to Asia. The established "Textile Machinery Webtalk" series via the newsroom IndustryArena will focus on ITMA ASIA in the run-up to the fair: VDMA Webtalks meet ITMA ASIA.

*See attached document for more information.

Monforts takes part in Webtalk by VDMA’s textile machinery division (c) Monforts/Pleva
13.05.2021

Monforts takes part in Webtalk by VDMA’s textile machinery division

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

Monforts Head of Technical Textiles Jürgen Hanel will take part in the next international webtalk to be held by the VDMA’s textile machinery division on May 20th.

He will be joined by Johannes Lutz, Research and Development Engineer at Pleva, to provide full details of how the latest Monforts coating technology is supported by special microwave measuring systems.

The Montex®Coat magnetic roller coating option allows a wide range of coatings and finishes to be carried out, while being easy to handle for operators and much easier to clean at the end of the process.

“This roller provides textile finishers with an expanded range of options due to the fully-adjustable positioning of the magnet within the roller and with four different magnet positions possible, can be set to operate both as a direct coating system and as an indirect coater,” Hanel said.

Lutz will provide an overview of the use of Pleva microwave measurement technology in coating processes, in addition to the latest developments in electronic evaluation.

To ensure a constant high quality in coating operations it is necessary to accurately measure and control the amount of chemical being applied, and Pleva’s series 700 devices achieve this via contact-free microwave moisture measurement technology which can be supplied either as single- or three-point units, or as a traversing measurement unit.

The free-to-attend webtalk will take place on May 20th from 2-3pm (CEST) and registration can be made here, along with further information.

Source:

AWOL Media