From the Sector

Reset
87 results
27.03.2024

KARL MAYER GROUP at SaigonTex 2024

At the upcoming SaigonTex, taking place from April 10th to 13th in Ho Chi Minh City, the KARL MAYER GROUP will present its innovations.

DThe KARL MAYER exhibition for warp preparation is entirely dedicated to sustainability. With BLUEDYE, an innovative machine is introduced, which ensures more sustainability and lower costs in the process of indigo dyeing. Thanks to innovative technological solutions, the amounts of water and chemicals used are significantly reduced. Additionally, less yarn waste is generated. Another innovation for more sustainability is CASCADE, a steam and condensation system that requires significantly less steam in the drying process of sizing and indigo dyeing plants by using a solution for energy recycling that is protected against imitation.

For the warp knitting sector, the group of companies presents its latest technological developments. Highlights include a digital solution from KM.ON for optimizing production management (DPM), innovations for enhancing performance in the HKS segment, and a double raschel machine that enables unique creative multi-color designs in spacer textiles with more colour and new Jacquard techniques.

At the upcoming SaigonTex, taking place from April 10th to 13th in Ho Chi Minh City, the KARL MAYER GROUP will present its innovations.

DThe KARL MAYER exhibition for warp preparation is entirely dedicated to sustainability. With BLUEDYE, an innovative machine is introduced, which ensures more sustainability and lower costs in the process of indigo dyeing. Thanks to innovative technological solutions, the amounts of water and chemicals used are significantly reduced. Additionally, less yarn waste is generated. Another innovation for more sustainability is CASCADE, a steam and condensation system that requires significantly less steam in the drying process of sizing and indigo dyeing plants by using a solution for energy recycling that is protected against imitation.

For the warp knitting sector, the group of companies presents its latest technological developments. Highlights include a digital solution from KM.ON for optimizing production management (DPM), innovations for enhancing performance in the HKS segment, and a double raschel machine that enables unique creative multi-color designs in spacer textiles with more colour and new Jacquard techniques.

"Vietnam is a growing market for textile production, which is gaining importance especially for major international sports brands," says Eddy Ho, Senior Sales Manager at KARL MAYER.
The sales professional expects a large number of visitors, especially from Vietnam, China, Taiwan, and South Korea. SaigonTex is one of the most important textile machinery exhibitions in East Asia, located in close proximity to production centres. Vietnam is, in turn, the second most important market for the KARL MAYER GROUP after China. It benefits from increasing foreign direct investments in textile production from China, Taiwan, and South Korea.

Source:

KARL MAYER GROUP

Freudenberg showcases sustainable solutions at Techtextil 2024 (c) Freudenberg Performance Materials
Freudenberg´s sustainable carrier material for green roofs on urban buildings is made from renewable resources
15.03.2024

Freudenberg showcases sustainable solutions at Techtextil 2024

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Biocarrier for green roofs
Freudenberg is showcasing a sustainable carrier material for green roofs on urban buildings at the trade fair. The carrier is made from polylactide, i.e. from renewable resources. When filled with soil, it provides a strong foothold to root systems, enabling the growth of lightweight sedum blankets that can be rolled out to provide instant green roofs. These roofs not only help counter urban heat, they also improve stormwater management and regulate indoor temperatures.

From textile waste to padding
The company extended its circular thermal wadding product range with the release of comfortemp® HO 80xR circular, a wadding made from 70 percent recycled polyamide from discarded fishing nets, carpet flooring and industrial plastic. Because polyamide 6, also known as nylon, retains its performance characteristics after multiple recycling processes, the fibers can be used again and again to manufacture performance sporting apparel, leisurewear and luxury garments.

Packaging solutions with various sustainability benefits
Freudenberg is also showcasing products for sustainable packaging and filtration solutions. The long-lasting Evolon® technical packaging series is a substitute for disposable packaging used in the transport of sensitive industrial items such as automotive parts. The material is made from up to 85 percent recycled PET. A further highlight at Techtextil are Freudenberg’s fully bio-based solutions for manufacturing dessicant bags. The binder-free material based on bio-fibers is also industrially compostable.
In addition, the experts will be giving trade fair visitors an insight into Freudenberg’s filtration portfolio.

Source:

Freudenberg Performance Materials

STFI: Lightweight construction innovations at JEC World in Paris (c) silbaerg GmbH and STFI (see information on image)
23.02.2024

STFI: Lightweight construction innovations at JEC World in Paris

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

VliesComp
The aim of the industrial partners Tenowo GmbH (Hof), Siemens AG (Erlangen), Invent GmbH (Braunschweig) and STFI united in the VliesComp project is to bring recycled materials back onto the market in various lightweight construction solutions. The application fields "Innovative e-machine concepts for the energy transition" and "Innovative e-machine concepts for e-mobility" were considered as examples. On display at JEC World in Paris will be a lightweight end shield for electric motors made from hybrid nonwovens - a mixture of thermoplastic fibre components and recycled reinforcing fibres - as well as nonwovens with 100% recycled reinforcing fibres. The end shield was ultimately manufactured with a 100% recycled fibre content. The tests showed that, compared to the variant made from primary carbon fibres using the RTM process, a 14% reduction in CO2 equivalent is possible with the same performance. The calculation for the use of the prepreg process using a bio-resin system shows a potential for reducing the CO2 equivalent by almost 70 %.

Bast fibre reinforcement
To increase stability in the plant stem, bast fibres form in the bark area, which support the stem but, in contrast to the rigid wood, are very flexible and allow slender, tall plants to move in the wind without breaking.A new process extracts the bast bark from hemp by peeling.The resulting characteristic values, such as tensile modulus of elasticity, breaking strength and elongation, are very promising in comparison with the continuous rovings made of flax available on the market.The material could be used as reinforcement in lightweight construction.At JEC World, STFI will be exhibiting reinforcing bars that have been processed into a knitted fabric using a pultrusion process based on bio-based reinforcing fibres made from hemp bast for mineral matrices.

Source:

Sächsische Textilforschungsinstitut e.V. (STFI)

DITF: Recyclable event and trade fair furniture made of paper (c) DITF
Structurally wound paper yarn element with green sensor yarn.
26.01.2024

DITF: Recyclable event and trade fair furniture made of paper

A lot of waste is generated in the trade fair and event industry. It makes sense to have furniture that can quickly be dismantled and stored to save space - or simply disposed of and recycled. Paper is the ideal raw material here: locally available and renewable. It also has an established recycling process. The German Institutes of Textile and Fiber Research (DITF) and their project partners have jointly developed a recycling-friendly modular system for trade fair furniture. The "PapierEvents" project was funded by the German Federal Environmental Foundation (DBU).

Once the paper has been brought into yarn form, it can be processed into a wide variety of basic elements using the structure winding process, creating a completely new design language.

A lot of waste is generated in the trade fair and event industry. It makes sense to have furniture that can quickly be dismantled and stored to save space - or simply disposed of and recycled. Paper is the ideal raw material here: locally available and renewable. It also has an established recycling process. The German Institutes of Textile and Fiber Research (DITF) and their project partners have jointly developed a recycling-friendly modular system for trade fair furniture. The "PapierEvents" project was funded by the German Federal Environmental Foundation (DBU).

Once the paper has been brought into yarn form, it can be processed into a wide variety of basic elements using the structure winding process, creating a completely new design language.

The unusual look is created in the structure winding process. In this technology developed at the DITF, the yarn is deposited precisely on a rotating mandrel. This enables high process speeds and a high degree of automation. After the winding process, the individual yarns are fixed, creating a self-supporting component. A starch-based adhesive, which is also made from renewable and degradable raw materials, was used in the project for the fixation.

The recyclability of all the basic elements developed in the project was investigated and confirmed. For this purpose the research colleagues at the project partner from the Department of Paper Production and Mechanical Process Engineering at TU Darmstadt (PMV) used the CEPI method, a new standard test procedure from the Confederation of European Paper Industries.

Sensor and lighting functions were also implemented in a recycling-friendly manner. The paper sensor yarns are integrated into the components and detect contact.

Also, a modular system for trade fair and event furniture was developed. The furniture is lightweight and modular. For example, the total weight of the counter shown is well under ten kilograms and individual parts can easily be shipped in standard packages. All parts can be used several times, making them suitable for campaigns lasting several weeks.

A counter, a customer stopper in DIN A1 format and a pyramid-shaped stand were used as demonstrators. The research work of the DITF (textile technology) and PMV (paper processing) was supplemented by other partners: GarnTec GmbH developed the paper yarns used, the industrial designers from quintessence design provided important suggestions for the visual and functional design of the elements and connectors and the event agency Rödig GmbH evaluated the ideas and concepts in terms of usability in practical use.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

15.12.2023

VIATT 2024 as the response to Vietnam's developing textile sector

Vietnam is the subject of increasing investment across an array of industries, with its textile sector going from strength to strength in a short space of time. To give key players from across the textile spectrum an opportunity to make their presence felt in this market, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will make its debut from 28 February – 1 March 2024. Taking place at the Saigon Exhibition and Convention Center (SECC), the new fair will cover three main product sectors, namely apparel fabrics, yarns and fibres, and garments; home textiles; as well as technical textiles and nonwovens, textile processing, and printing technology.

Vietnam is the subject of increasing investment across an array of industries, with its textile sector going from strength to strength in a short space of time. To give key players from across the textile spectrum an opportunity to make their presence felt in this market, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will make its debut from 28 February – 1 March 2024. Taking place at the Saigon Exhibition and Convention Center (SECC), the new fair will cover three main product sectors, namely apparel fabrics, yarns and fibres, and garments; home textiles; as well as technical textiles and nonwovens, textile processing, and printing technology.

In line with the industry’s anticipation, the country was identified as the ideal location for ASEAN’s new comprehensive textile platform for several key reasons. Vietnam’s pro-business policies, strategic geographical location, abundant labour force, and favourable trade agreements have contributed to its rise as a global textile manufacturing hub. Agreements such as the Regional Comprehensive Economic Partnership (RCEP); the Indo-Pacific Economic Framework for Prosperity (IPEF); and 15 free trade agreements (FTAs) covering over 60 countries and regions, will further enable participants from across the value chain to conduct cross-border business after connecting at next year’s show. In addition, several key travel initiatives that serve international players have been implemented, including the country’s APEC Business Travel Card programme[1], availability of e-visas to all nationalities, and visa-free travel for select countries[2].  

Exhibitors from multiple textile sub-sectors converge in February
In Vietnam’s home textile segment, rising urbanisation, emerging young consumers, and higher disposable incomes are interrelated factors driving growth[3]. Globally, three of the top trends include recycling; utilising green fibres; and the increasing use of technical fabrics for enhanced comfort and health. At the fair, confirmed home textiles exhibitors include Hanyang Eco Tex, Hohmann GmbH, Phuong Nam Feather, and SIGMA, set to showcase their most up-to-date products, covering bedding, upholstery fabrics, curtain, and sun protection.
 
Utilised for automobiles, civil aviation, construction, health care, and more, Vietnam's exports of technical textiles reached USD 676.6 million for the first nine months of 2022, up 17.1% compared to the same period in 2021[4]. This in turn bodes well for the country’s import prospects of quality machinery and equipment. Hoping to cater to domestic demand at VIATT 2024, international suppliers in this category include Julai, SIGMA, and Skwentex.

Meanwhile, apparel-related products make up the lion’s share of the country’s textile exports – according to Vietnam Textile & Apparel Association (VITAS), in 2022 these numbered USD 29.1 billion. From Ho Chi Minh to Hanoi, numerous international fashion brands have a manufacturing presence, including Adidas, H&M, Lacoste, Lululemon, Nike, The North Face, Uniqlo, and many more. At next year’s fair, exhibitors such as Avery Dennison, Lenzing, Stylem Takisada-Osaka, and Texwinca, will aim to draw the attention of apparel brands and a wide range of other domestic and international buyers.

The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) is organised by Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE), covering the entire textile industry value chain.

[1] ‘Everything You Need to Know About Traveling to Vietnam with an APEC Business Travel Card’, April 2023, Vietnam Briefing, https://www.vietnam-briefing.com/news/apec-business-travel-card-vietnam.html/ (Retrieved: November 2023)
[2] ‘Vietnam Introduces E-Visa for All Nationalities from August 15, 2023’, August 2023, Vietnam Briefing, https://www.vietnam-briefing.com/news/vietnam-introduces-e-visa-for-all-nationalities-from-august-15-2023.html/ (Retrieved: November 2023)
[3] ‘Vietnam Home Textile Market Size & Share Analysis’, 2023, Mordor Intelligence, https://shorturl.at/wQVWZ (Retrieved: November 2023)
[4] ‘Vietnam's technical fabric exports continue to be positive’, October 2022, Web Portal of Supporting Industry of Vietnam, https://shorturl.at/lmnvX (Retrieved: November 2023)

Source:

Messe Frankfurt (HK) Ltd

Photo Formidable Media / Green Theme Technologies
14.12.2023

YKK and GTT Win ISPO Award

The ISPO Textrends judges have selected YKK's DynaPel™ water-repellent zipper as the Best Product in the accessories category. The competition, held twice a year in conjunction with the ISPO trade show, recognizes the most innovative performance textiles, components, and apparel.

Designed to be compatible with garment recycling systems, the DynaPel™ zipper uses GTT’s EMPEL® technology instead of the standard PU film to achieve its water repellency. The lack of a PU film helps remove one of the barriers of textile-to-textile recycling of performance apparel by eliminating the urethane material, which presents challenges to garment recycling processes.

Conventional chemical and mechanical garment recycling systems cannot process the polyurethane film commonly used on water-repellent zippers, necessitating the removal of zippers from garments before recycling.  This additional processing step often deters recyclers from accepting garments with PU zippers, resulting in unnecessary waste.

The ISPO Textrends judges have selected YKK's DynaPel™ water-repellent zipper as the Best Product in the accessories category. The competition, held twice a year in conjunction with the ISPO trade show, recognizes the most innovative performance textiles, components, and apparel.

Designed to be compatible with garment recycling systems, the DynaPel™ zipper uses GTT’s EMPEL® technology instead of the standard PU film to achieve its water repellency. The lack of a PU film helps remove one of the barriers of textile-to-textile recycling of performance apparel by eliminating the urethane material, which presents challenges to garment recycling processes.

Conventional chemical and mechanical garment recycling systems cannot process the polyurethane film commonly used on water-repellent zippers, necessitating the removal of zippers from garments before recycling.  This additional processing step often deters recyclers from accepting garments with PU zippers, resulting in unnecessary waste.

EMPEL® technology uses advanced green chemistry devoid of PFAS and a specialized manufacturing process that allows the chemistry to penetrate the yarn and encapsulate it with a water-repellent layer through molecular cross-linking. The molecular cross-linking creates an extremely durable layer that is highly resistant to abrasion and invisible to the eye.

More information:
ISPO Textrends Award zipper PFAS
Source:

Formidable Media / Green Theme Technologies

Dibella: Product launch at two London trade fairs (c) Dibella
17.11.2023

Dibella: Product launch at two London trade fairs

Dibella will present its circular bed linen “Versailles” at the Sustainable Design Summit and the Cruise Ship Interiors Design Expo in London. Dibella is thus once again underpinning its reputation as a pioneer in the field of sustainability.

The Bocholt-based company is presenting its new innovation for the first time at the Sustainable Design Summit on 28 November 2023 at the Museum of London Docklands. International visitors from the cruise, hotel and aviation sectors will have the opportunity to find out more about the first circular bed linen "Versailles".

At the subsequent Cruise Ship Interiors Design Expo from 29 to 30 November 2023 at ExCeL in London, Dibella will be exhibiting for the second time after a successful start in 2022. Under the motto "Almost too good to get out of bed", Dibella will be presenting its new innovation "Versailles", its multi-certified products, the company and its customised services and benefits.

Dibella will present its circular bed linen “Versailles” at the Sustainable Design Summit and the Cruise Ship Interiors Design Expo in London. Dibella is thus once again underpinning its reputation as a pioneer in the field of sustainability.

The Bocholt-based company is presenting its new innovation for the first time at the Sustainable Design Summit on 28 November 2023 at the Museum of London Docklands. International visitors from the cruise, hotel and aviation sectors will have the opportunity to find out more about the first circular bed linen "Versailles".

At the subsequent Cruise Ship Interiors Design Expo from 29 to 30 November 2023 at ExCeL in London, Dibella will be exhibiting for the second time after a successful start in 2022. Under the motto "Almost too good to get out of bed", Dibella will be presenting its new innovation "Versailles", its multi-certified products, the company and its customised services and benefits.

With "Versailles", Dibella is realising its vision of a closed-loop economy. The specialist for sustainable contract textiles has succeeded in recycling old, no longer usable bed linen into new fibres and weaving them into new bed linen.

Source:

Dibella GmbH

ITMA Asia + CITME Photo: Swissmem
01.11.2023

15 member companies of Swiss Textile Machinery Association at upcoming ITMA Asia + CITME

In China, the textile industry is forward-looking and resilient – with a healthy appetite for new technologies and a determination to keep its leading position. Sustainability is increasingly coming into focus, so there is a growing demand for recycling technologies, as well as automated solutions and digitalization. Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, is clear: “China is the main market for a large number of our association members.” On top of growing consumer demand and technological capabilities, the latest ambitious five-year plan will drive further development of the Chinese textile industry in world markets, and Swiss companies will work with all stakeholders to enable its success.

In China, the textile industry is forward-looking and resilient – with a healthy appetite for new technologies and a determination to keep its leading position. Sustainability is increasingly coming into focus, so there is a growing demand for recycling technologies, as well as automated solutions and digitalization. Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, is clear: “China is the main market for a large number of our association members.” On top of growing consumer demand and technological capabilities, the latest ambitious five-year plan will drive further development of the Chinese textile industry in world markets, and Swiss companies will work with all stakeholders to enable its success.

Market proximity
Swiss companies realized many years ago that geographical proximity is the key to success. Stäubli has started to set up offices in Chinese cities since 1998 and counts 12 locations today, to serve the whole country. In 2002, Itema established a centralized local branch which today has 160 employees in various functions. Loepfe has expanded its presence by creating an independent local business unit to overcome the 9,000 km distance by air, while Uster Technologies has had a Chinese subsidiary since 1982, with offices and service stations in different provinces. Luwa set up its offices and workshop in Shanghai in 1997. Rieter established a presence in mainland China in 2005, driven by a strong commitment to expanding the country’s know-how and expertise – and ten years later opened an advanced research center. All Swiss companies with serious business goals in China have made similar commitments to connect with customers and maintain strong relationships.

Understanding Chinese customers
Swiss companies also understand that Chinese customers require dedicated attention, and that speed is more essential than ever in delivering both machines and services.
Manufacturers in China are seeking cost-effective solutions to remain competitive, while consumers are looking for value in their purchases. Companies need to develop solutions that provide tangible economic benefits to their clients. Furthermore, energy savings have become paramount in China, due to the government's commitment to environmental sustainability and reduced carbon emissions. “Businesses are adopting more energy-efficient processes and technologies to meet stringent energy conservation and emission reduction targets,” says Peter Schnickmann, Managing Director at Luwa Air Engineering (Shanghai). He notes an investment trend for solutions helping Chinese companies cut operational costs and minimize their carbon footprint.

To enhance the reputation of both companies and products – and boost the image of the entire industry – the environmental impact needs to decrease. Priorities are saving water and waste, as well as reducing, replacing or completely eliminating the use of harmful substances. China has a strong demand for environmental-friendly solutions and sustainable technologies.

Customer-oriented in weaving
The huge number of Chinese fabric producers calls for an immense volume of weaving machinery to be supplied by international and local providers. Swiss machinery manufacturers hold an impressive share of this business.
Chinese weavers require advanced technology, with increasingly higher standards of efficiency. In weaving preparation, latest solutions match the speed, quality and reliability now wanted. Weaving machines too offer the eco-efficiency, performance, and ease of use needed, with innovations that extend the scope of sustainable weaving, and open-platform systems configurable to weavers’ specific operations. A huge increase in demand for technical textiles in recent years has been driven by applications such as carbon fiber, aramid and glass fiber.

Profitable in spinning
China’s competitive advantages come from its large-scale and integrated manufacturing capabilities, along with the use of advanced automation and digitization technologies. Spinners aim to capitalize on extended market opportunities, with more economical production. The latest air-jet spinning machines serve these goals, allowing exceptionally low production costs per kilogram of yarn, coupled with high flexibility and reliability. Sustainable yarns are in great demand.

The automation trend in spinning mills focuses on connecting production processes. Data is used to ensure the highest quality standards, most efficient raw material usage, reduction of waste, and energy savings. To make spinning mills more competitive, latest solutions combine cutting-edge hardware, data-enabled software and renowned textile expertise.

More information:
ITMA Asia + CITME Swissmem
Source:

Swissmem

Freudenberg: Sustainable microfiber solution for artificial leather applications (c) Freudenberg Performance Materials Holding GmbH
Evolon® sustainable microfiber coating substrate for artificial leather
19.07.2023

Freudenberg: Sustainable microfiber solution for artificial leather applications

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Evolon® sustainable microfiber coating substrates
Evolon® microfiber fabrics are ideal coating substrates for artificial leather applications in the shoe, furniture and car industries. They are particularly suitable as a carrier material for PU and PVC coatings. Evolon® microfiber materials have non-fraying edges, which makes converting easier and quicker. They contain 80% recycled PET from Freudenberg’s in-house bottle recycling plant. Furthermore, they are manufactured with no solvent and no chemical binder in the company’s Evolon® plant located in Colmar, France. The plant is accredited according to OEKO-TEX STeP sustainability manufacturing certification and the DETOX TO ZERO criteria. European manufacturing offers logistic benefits to European customers through shorter supply chain and transport routes.

Reinforcement material for leather goods
Manufacturers of leather goods also benefit from Evolon® microfiber when they use it as a reinforcement material for original leather. It is drapable and soft and provides optimal shaping support for leather. In addition, Evolon® materials offer important sustainability advantages for the manufacturing of luxury leather bags, such as being 100% made in Europe, eco-friendly and socially-responsible production, and the use of recycled raw materials.

Source:

Freudenberg Performance Materials Holding GmbH

RadiciGroup at Phygital Sustainability Expo photo: Phygital Sustainability Expo/RadiciGroup
07.07.2023

RadiciGroup at Phygital Sustainability Expo presenting Biofeel® eleven

RadiciGroup took part in the Phygital Sustainability Expo, this year in its fourth edition, which was held in Rome on 5 and 6 July. This event is entirely dedicated to the ecological transition of fashion and design brands through technological innovation. The show is an important platform for discussion on sustainable transition issues, involving Italian and international brands, fashion tech start-ups, representatives from the institutional, business and educational fields, and consumers.

RadiciGroup took part in the Phygital Sustainability Expo, this year in its fourth edition, which was held in Rome on 5 and 6 July. This event is entirely dedicated to the ecological transition of fashion and design brands through technological innovation. The show is an important platform for discussion on sustainable transition issues, involving Italian and international brands, fashion tech start-ups, representatives from the institutional, business and educational fields, and consumers.

RadiciGroup's participation in the event was further evidence of the Group's commitment to making a contribution to sustainability and circularity in the fashion and textile industry, in collaboration with all the other players in the supply chain. During the narrated fashion show, held on the evening of Wednesday, 5 July, in the evocative archaeological complex of the Imperial Forum Museum, RadiciGroup presented a maxi dress made of Biofeel® eleven, a yarn of completely natural origin featuring high technical, aesthetic and environmental performance. This yarn is produced starting from a small bean cultivated in India on semi-arid land and thus does not compete with human food production. These beans yield a special oil ideal for obtaining biopolymers, such as the one produced by Arkema and spun into yarn at RadiciGroup in Italy.

The dress is not only made from a low environmental impact raw material, but is also an example of ecodesign: the garment was realized on a Shima Seiki WholeGarment knitting machine, where the entire item was knit directly from spools of Biofeel® eleven yarn, bypassing the traditional stages of weaving and tailoring. It is a zero-waste process, as only the quantity of yarn strictly needed for the garment is used.

Biofeel® eleven yarn endows the dress with unique characteristics, including low moisture absorption, greater lightness and high resistance and durability. Besides being 100% biobased, the yarn is also 100% recyclable because it is made of a mono-material polymer, which facilitates its end-of-life recycling and processing into new materials suitable for any application requiring high performance.

(c) EREMA
07.06.2023

EREMA presents a new solution for PET fibre-to-fibre recycling

Following their entry into the fibres and textiles sector, as announced at K 2022, recycling machine manufacturer EREMA launches the INTAREMA® FibrePro:IV - which has been specially developed for PET fibre-to-fibre recycling - at ITMA in Milan from June 8 to 14. Thanks to its especially gentle material preparation and efficient removal of spinning oils, the rPET produced can be reused in proportions of up to 100 percent for the production of very fine fibres.

Following their entry into the fibres and textiles sector, as announced at K 2022, recycling machine manufacturer EREMA launches the INTAREMA® FibrePro:IV - which has been specially developed for PET fibre-to-fibre recycling - at ITMA in Milan from June 8 to 14. Thanks to its especially gentle material preparation and efficient removal of spinning oils, the rPET produced can be reused in proportions of up to 100 percent for the production of very fine fibres.

PET is regarded as a key material for the production of synthetic fibres. Around two thirds of the total volume of PET goes into the production of PET fibres for the textile industry. This highlights the importance of high-quality recycling solutions for the circular economy. By combining proven INTAREMA® technology with a new IV optimiser, EREMA succeeds in processing shredded PET fibre materials heavily contaminated by spinning oils in such a way that the finest fibres can be produced again from the recycled pellets. The system, which now joins EREMA's machine portfolio as the INTAREMA® FibrePro:IV, is characterised by a longer residence time of the PET melt. This is an essential factor for achieving high quality recycled pellets, as it allows the spinning oils and other additives used to improve the handling of the fibres during manufacturing to be removed more efficiently than in conventional PET recycling processes. Following extrusion, by polycondensation the intrinsic viscosity (IV) of the PET melt is increased in the new IV optimiser and under high vacuum to the precise level that is needed for fibre production. "Including filtration the output quality that we achieve with this recycling process is so high that ultra-fine fibres of up to 2 dtex can be produced using these rPET pellets, with an rPET content of 100 percent," says Markus Huber-Lindinger, Managing Director at EREMA. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

While the focus of the fibre and textiles application is currently still on PET fibre recycling, EREMA is committed to driving forward the recycling of mixed fibre materials from classic textile recycling collection in a next project phase. In order to accelerate development work, the EREMA Group opened its own fibre test centre, where a cross-company team is working on recycling solutions for fibre-to-fibre applications. The centre also operates a fully equipped and variable industrial-scale recycling plant. It includes the peripheral technology required and is available to customers for trials.

More information:
EREMA ITMA Fibers Recycling
Source:

EREMA Group

FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale © Foto: Indorama Ventures Fibers Germany GmbH / FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale
06.06.2023

Trevira CS at the Cruise Ship Interiors Design Expo Americas in Miami

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.

Source:

Indorama Ventures Fibers Germany GmbH

24.05.2023

Way2ITMA: Recycling technologies offered by VDMA members

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling
The short descriptions of the solutions offered by the member companies are structured according to the following headings:

  • Recycling of textile production waste and textiles
  • Recycling of caustic soda and waste heat
  • Processing of recycled materials

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling
The short descriptions of the solutions offered by the member companies are structured according to the following headings:

  • Recycling of textile production waste and textiles
  • Recycling of caustic soda and waste heat
  • Processing of recycled materials
Source:

VDMA e.V.

Recycled yarn (c) ITA Aachen
05.05.2023

ITA at the ITMA: Smart Circular Economy

"ITA Aachen and ITA Augsburg are part of the ITA Group International Centre for Sustainable Textiles. Experience our textile innovations at two exhibition booths," explains ITA Institute Director Professor Dr. Thomas Gries. "See our ring spinning tester at booth H3-B304, which spins recycled fibres sustainably and individually in a previously impossible fineness. In addition, there is digital yarn monitoring, which enables new market potentials. Get an idea of the Recycling Atelier of ITA Augsburg at booth H3-A207 and see the textile cycle from used textile to solution steps for industrial implementation together with industry partners. Join us on the Walk4Recycling and follow the path from used textile to a new knitted pullover on a tour of the trade fair. This is how we live up to our claim as the ITA Group: sustainable - digital - individual."

"ITA Aachen and ITA Augsburg are part of the ITA Group International Centre for Sustainable Textiles. Experience our textile innovations at two exhibition booths," explains ITA Institute Director Professor Dr. Thomas Gries. "See our ring spinning tester at booth H3-B304, which spins recycled fibres sustainably and individually in a previously impossible fineness. In addition, there is digital yarn monitoring, which enables new market potentials. Get an idea of the Recycling Atelier of ITA Augsburg at booth H3-A207 and see the textile cycle from used textile to solution steps for industrial implementation together with industry partners. Join us on the Walk4Recycling and follow the path from used textile to a new knitted pullover on a tour of the trade fair. This is how we live up to our claim as the ITA Group: sustainable - digital - individual."

ITA Aachen - Digital ring spinning tester for recycled fibres enables spinning of fine yarns with high recycled fibres content
The Institut für Textiltechnik of RWTH Aachen University (ITA) will be exhibiting a digital ring spinning tester, which spins recycled fibres directly and conventionally with a particularly high content of 60-70 percent. Up to now, recycled yarns have mainly been rotor-spun in this blend ratio. This results in rather coarse yarns and is not suitable for finer textiles such as outerwear. Ring spinning of recycled yarns now enables the spinning of finer yarns and thus a higher application level for recycled materials.

A unique selling point of the ITA ring spinning tester is the simultaneous spinning in the direct spinning process from the sliver and in the classic ring spinning process. For this purpose, the strength and elongation of the spun yarn are determined online and digitally for the first time. The real-time measurement allows process parameters and yarn properties to be adjusted iteratively and quickly. The ring spinning tester was upgraded from an existing tester to Industry 4.0 standard and is operated via a tablet. Operation via tablet enables the adjustment of process parameters including online quality monitoring remotely from anywhere in the world.
 
For this purpose, the ring spinning tester is also able to produce fine ring spun yarns. These yarns made from recycled material opens up a multitude of further fields of application for woven and knitted goods. Now, for example, clothing and technical textiles can be made from recycled material, the production of which was not possible before - such as outerwear made from recycled material. The development of new industries and fields of application opens up new market potential for recycled yarns - also and especially for processing in Europe. This creates the opportunity to preserve key technologies and jobs in cost-intensive locations.

ITA Augsburg - Recycling Atelier: Walk4Recycling
The Recycling Atelier of the Institut für Textiltechnik Augsburg gGmbH on stand H3-A207 presents the textile recycling from used textiles into new products via the various process steps and, together with the industrial partners, opens up solution paths for industrial implementation.

Under the headline "Walk4Recycling", a tour of the fair shows the cycle of used textiles from used knitwear into a new knitted pullover via a ring yarn made from a blend of 65 percent recycled cotton and 35 percent virgin polyester. The key innovation here is the high proportion of recycled fibres from post-consumer textiles for a ring yarn of this fineness. Today, mainly coarse rotor yarns for low-quality textiles are spun from these materials. The industrial partners participating in the Walk4Recycling are partners of the Recycling Atelier and contribute with their technologies to the fact that fibre material from old clothes can be processed in various process stages into a yarn of new value and high-quality ready-made garments.

The Walk4Recycling offers visitors the opportunity to experience a complete recycling cycle with the numerous process stages from tearing the old textiles, preparing and spinning the fibres and knitting a new jumper live during the fair. Get detailed information on the mechanical recycling of clothing via QR code, website and flyer about the participating exhibitors and their machines and technologies. A short movie will give you additional insights into the various processes involved in the production of the jumper.

12.04.2023

ExxonMobil showcases hygiene solutions at INDEX™23

ExxonMobil will present its portfolio of products that enable innovative solutions with sustainability benefits for hygiene and personal care applications at INDEX™23. This portfolio includes ExxonMobil™ PP, Achieve™ Advanced PP (polypropylene) and Vistamaxx™ performance polymers that can be used to create differentiated hygiene and personal care products.

ExxonMobil will present its portfolio of products that enable innovative solutions with sustainability benefits for hygiene and personal care applications at INDEX™23. This portfolio includes ExxonMobil™ PP, Achieve™ Advanced PP (polypropylene) and Vistamaxx™ performance polymers that can be used to create differentiated hygiene and personal care products.

An innovation being presented will be the model baby diaper of which the chassis is made exclusively with ExxonMobil’s extensive portfolio of products. Also on display will be a new version of the high-loft, ultra-soft, silky-smooth nonwoven solution for premium hygiene products using a blend of Vistamaxx™ performance polymers, Achieve™ Advanced PP and ExxonMobil™ PP. Developed collaboratively with Reifenhäuser Reicofil, this nonwoven solution delivers sustainability benefits by including ExxonMobil™ PP ISCC PLUS mass balance certified circular polymers using Exxtend™ technology for advanced recycling of plastic waste. Produced efficiently in one step from pellet to nonwoven via high-speed spunbond process, this soft nonwoven is ideal for use in premium diapers, pant-type diapers, feminine care and adult incontinence products.

Source:

ExxonMobil

(c) SABIC
05.04.2023

SABIC presents portfolio for healthcare and hygiene market at INDEX™23

SABIC will present its portfolio of PURECARES™ and TRUCIRCLE™ materials for the healthcare and hygiene market at INDEX™23 from April 18 to 21 in Geneva, Switzerland, under the theme of ‘Collaborating for sustainability and innovative solutions’.

At INDEX, SABIC will highlight a joint project with two market leaders, using certified circular polymers from the TRUCIRCLE portfolio in recyclable films for feminine hygiene, baby care and disposable medical applications. In all of these cases from diapers to surgical drapes and medical gowns, the sustainable materials can serve as direct drop-in alternatives with no compromise in production efficiency and product performance.

Further examples on display at the company’s booth will feature TRUCIRCLE solutions for facemasks, including an N95 design that localizes the value chain with SABIC® PURECARES PP spunbond and meltblown polymers in Saudi Arabia. SABIC provides complete solutions for facemask production as part of its localization strategy and has been a key enabler of the Saudi Made initiative. Also shown will be a closed-loop facemask developed in collaboration with industrial and research partners in Europe.

SABIC will present its portfolio of PURECARES™ and TRUCIRCLE™ materials for the healthcare and hygiene market at INDEX™23 from April 18 to 21 in Geneva, Switzerland, under the theme of ‘Collaborating for sustainability and innovative solutions’.

At INDEX, SABIC will highlight a joint project with two market leaders, using certified circular polymers from the TRUCIRCLE portfolio in recyclable films for feminine hygiene, baby care and disposable medical applications. In all of these cases from diapers to surgical drapes and medical gowns, the sustainable materials can serve as direct drop-in alternatives with no compromise in production efficiency and product performance.

Further examples on display at the company’s booth will feature TRUCIRCLE solutions for facemasks, including an N95 design that localizes the value chain with SABIC® PURECARES PP spunbond and meltblown polymers in Saudi Arabia. SABIC provides complete solutions for facemask production as part of its localization strategy and has been a key enabler of the Saudi Made initiative. Also shown will be a closed-loop facemask developed in collaboration with industrial and research partners in Europe.

The company’s PURECARES polyolefin products are based on technologies free of both tris (nonylphenyl) phosphite (TNPP) and phthalates. Consumer comfort is achieved by using SABIC polypropylene (PP) and polyethylene (PE) polymers for bi-component fibers to answer multiple needs for soft and loft handfeel nonwovens, enabling easy lamination to other building blocks on medical nonwovens or absorbent hygiene applications.

In addition, SABIC produces TRUCIRCLE certified circular polymers for its PURECARES PP and PE portfolio with feedstock based on advanced recycling of mixed and used plastic that would otherwise typically not be suitable for mechanical recycling processes. These more sustainable solutions can be adopted in downstream processes as direct drop-in alternatives to incumbent materials with no compromise in production efficiency, purity and product performance.

Source:

SABIC

03.02.2023

Cellulose Fibres Conference 2023 publishes program

International experts will discuss topics along the entire cellulose fibre value chain at the upcoming Cellulose Fibres Conference, 8–9 March 2023 in Cologne and online.

How can the cellulose fibre industry contribute to the sustainability and circularity of the textile sector? How can fibre markets achieve a circular economy for their materials? What are the most sustainable technologies on the market? And, are there innovative, interesting raw materials and technologies worth exploring to meet the challenges of the coming years?

These and other questions in the field of cellulose fibres will be discussed within the program of the Cellulose Fibres Conference 2023. The two-day event will provide insights into the latest developments of the cellulose fibre sector and introduce innovative start-ups, technologies as well as novel fibre applications. A special focus will be set on the textile sector and its awaited paradigm shift towards circular economy in the following years.

Seven sessions will provide in depth views from fibre production to recycling, policy and market trends:

International experts will discuss topics along the entire cellulose fibre value chain at the upcoming Cellulose Fibres Conference, 8–9 March 2023 in Cologne and online.

How can the cellulose fibre industry contribute to the sustainability and circularity of the textile sector? How can fibre markets achieve a circular economy for their materials? What are the most sustainable technologies on the market? And, are there innovative, interesting raw materials and technologies worth exploring to meet the challenges of the coming years?

These and other questions in the field of cellulose fibres will be discussed within the program of the Cellulose Fibres Conference 2023. The two-day event will provide insights into the latest developments of the cellulose fibre sector and introduce innovative start-ups, technologies as well as novel fibre applications. A special focus will be set on the textile sector and its awaited paradigm shift towards circular economy in the following years.

Seven sessions will provide in depth views from fibre production to recycling, policy and market trends:

  • Strategies, Policy Framework of Textiles and Market Trends,
  • Circular Economy and Recyclability of Fibres,
  • Alternative Feedstocks and Supply Chains,
  • Innovation Award “Cellulose Fibre Innovation of the Year 2023″,
  • Sustainability and Environmental Impacts,
  • Ionic Liquids and New Technologies for Pulps, Fibres and Yarns,
  • New Technologies and Applications beyond Textiles.

The full conference program is available here.

Source:

nova-Institut für politische und ökologische Innovation GmbH

30.12.2022

Future Fabrics auf der MUNICH FABRIC START

Die MUNICH FABRIC START ist in Deutschland eine führende Messe für zukunftsrelevante Textilinnovationen für den Fashionbereich. Ob auf der integriert stattfindenden internationalen Denim Tradeshow BLUEZONE oder in den Areas Fabrics und Additionals mit Materialneuheiten für alle Bekleidungssegmente, ReSOURCE und Sustainable Innovations für nachhaltige Denkansätze, Design Studios mit Stoffdesigns und neuen Entwicklungen für Prints, dem Innovationshub KEYHOUSE oder im neuen Sourcing-Areal THE SOURCE für internationale, vertikale Integration – nachhaltige Entwicklungen ziehen sich durch alle Bereiche. Dazu gehören:

Die MUNICH FABRIC START ist in Deutschland eine führende Messe für zukunftsrelevante Textilinnovationen für den Fashionbereich. Ob auf der integriert stattfindenden internationalen Denim Tradeshow BLUEZONE oder in den Areas Fabrics und Additionals mit Materialneuheiten für alle Bekleidungssegmente, ReSOURCE und Sustainable Innovations für nachhaltige Denkansätze, Design Studios mit Stoffdesigns und neuen Entwicklungen für Prints, dem Innovationshub KEYHOUSE oder im neuen Sourcing-Areal THE SOURCE für internationale, vertikale Integration – nachhaltige Entwicklungen ziehen sich durch alle Bereiche. Dazu gehören:

Tee-Textilien
WASTEA by SCAYS: Von Schuhen, über Gürtel und Taschen bis hin zu Flugzeugen oder Yachten – in all diesen Bereichen könnte in Zukunft eine neue pflanzenbasierten Lederalternative zum Einsatz kommen: WASTEA. Nach der Einführung von Apfelleder hat die Unternehmensgruppe mit Sitz in Istanbul, SCAYS, auf der vergangenen Edition der MUNICH FABRIC START seine neueste Entwicklung präsentiert: Leder aus Teeabfällen. WASTEA basiert auf zwei Komponenten – einem Textil als Basis und einer Beschichtung aus dem neuen Tee-Material. Für ein späteres Recycling könnten die Schichten voneinander getrennt werden, so SCAYS. Aus dem Textil werden wieder Textilien, aus WASTEA wird WASMENT – eine neue Art Zement, aus dem das Unternehmen in der nahen Zukunft Schulen bauen möchte.

Blumenleder
Flower Matter by Irene Purasachit: Täglich entstehen Unmengen an Blumenabfällen – die in Finnland lebende Designerin Irene Purasachit schenkt ihnen ein zweites Leben. Blumenstiele und -blätter recycelt sie zu Stoff und Papier – eine vegane Alternative zur Herstellung von Taschen, Geldbeuteln oder Blumenpapier. Da das sogenannte „Flaux“ Material zu 100 Prozent aus Blumenresten besteht, ist es komplett natürlich, biologisch abbaubar, plastik- und lederfrei.

Bakterielle Zellulose
Biotic by Studio Lionne van Deursen: Man nehme Hefe, Bakterien und gesüßten grünen Tee – nach einem Fermentationsprozess wird daraus biologisch abbaubares, widerstandsfähiges und hochflexibles Material. Wie das funktioniert? Mikroben spinnen Nanofasern aus bakterieller Zellulose auf eine Oberfläche. Sobald diese Schicht getrocknet ist, wird sie zu einem festen Material, das sich in den Eigenschaften sehr ähnlich zu Leder verhält. In Experimenten mit Pflanzenfarben und Farbstoffen aus Fruchtabfällen hat die gleichnamige Designerin des Studios für Materialforschung und Produktdesign „Lionne van Deursen“ aus den Niederlanden eine Stoffkollektion in bunten Farben, mit unterschiedlicher Lichtdurchlässigkeit und abwechslungsreichen Mustern entwickelt.

Upcycling mit Alpaka
Re-Up-Cycle by Incalpaca: Der Alpaka-Spezialist Incalpaca hat eine hochspezialisiertes Re- und Upcycling-
Verfahren entwickelt, bei dem aus Textilresten neue langlebige High-End-Gewebe entstehen. Dafür kauft Incalpaca Stoffreste wie Webkanten, Muster oder Garne aus alten Lagerbeständen, mischt diese mit Alpakafasern und stellt daraus hochwertige Re-Up-Cycle-Garne her. Verwendet werden können Abfälle aus Wolle und Nylonmischungen sowie recyceltes Nylon, mit Acryl und Baumwolle hingegen funktioniert das Verfahren nicht. Auch extrem kurze Fasern können verarbeitet werden. Das Ergebnis: 120.000 Kilogramm recyceltes und upcyceltes Garn jährlich – zum Beispiel für Capes, Throws und Mäntel.

UV-sensible Garne
Sunkolor by Panorama Fabrics: Mit dem zunehmenden Klimawandel steigt auch die Menge der unsichtbaren UV-Strahlen der Sonne. Das Problem daran: Die jeweilige Stärke ist mit bloßem Auge nicht zu erkennen. Genau das kann mit Sunkolor gelingen, denn das Material hilft dabei, die Sonneneinwirkung visuell wahrzunehmen. Das Berliner Design Studio Panorama Fabrics hat eine Technologie für Garne entwickelt, die UV-Strahlen in Textilien sichtbar machen. Durch die Sonneneinstrahlung verwandelt sich die Farbe der Sunkolor-Garne und zeigt für die menschliche Haut gefährliche UV-Indexbereiche an.

Nachhaltige Innovationen werden den Besucher:innen auch auf der kommenden MUNICH FABRIC START Spring.Summer 24 vom 24. bis 26. Januar 2023 im MOC München sowie auf der BLUEZONE und im KEYHOUSE vom 24. bis 25. Januar 2023 auf dem Zenith Areal quer durch alle Schritte der Wertschöpfungskette finden: von zahlreichen zukunftsweisenden Materialien über wasserloses Färben und sauerstoffbasierte Veredlung bis hin zu KI-gesteuerten Verfahren.

Source:

MUNICHFABRICSTART Exhibitions GmbH

Foto: Messe Düsseldorf, Constanze Tillmann
24.11.2022

Trendbörse EuroShop 2023

  • Materials & Surfaces: was Design in schwierigen Zeiten bewirken kann
  • Nachhaltigkeit ist Leitgedanke
  • Natur und Harmonie als Rezept gegen Krisenmodus
  • Custom-made Design gewinnt

Aufgeschäumtes Aluminium, transluzente Betonflächen oder filigrane Gespinste, die das Gewicht massiver Steinbrocken zu balancieren scheinen – die Inszenierung von Shopping-Erlebnissen spielt gern mit dem visuellen Wow. Die Dimension Materials & Surfaces der EuroShop, the World’s No. 1 Retail Trade Fair, vom 26. Februar bis 02. März 2023 in Düsseldorf, ist Trendbörse und Inspiration für Store-Architekten, Ladenbauer und Kreative.

  • Materials & Surfaces: was Design in schwierigen Zeiten bewirken kann
  • Nachhaltigkeit ist Leitgedanke
  • Natur und Harmonie als Rezept gegen Krisenmodus
  • Custom-made Design gewinnt

Aufgeschäumtes Aluminium, transluzente Betonflächen oder filigrane Gespinste, die das Gewicht massiver Steinbrocken zu balancieren scheinen – die Inszenierung von Shopping-Erlebnissen spielt gern mit dem visuellen Wow. Die Dimension Materials & Surfaces der EuroShop, the World’s No. 1 Retail Trade Fair, vom 26. Februar bis 02. März 2023 in Düsseldorf, ist Trendbörse und Inspiration für Store-Architekten, Ladenbauer und Kreative.

Veränderte Vorzeichen, innere Werte
Der Rahmen für den klassischen Einkaufsbummel hat sich verschoben, der andauernde Krisenmodus stellt das stationäre Shopping vor neue Aufgaben – und damit auch die Hersteller von Ladenbau-Werkstoffen. „Im Vergleich zu der Zeit vor Corona ist es heute nicht mehr nur das Ziel der Planer, die Kunden durch eine angenehme Atmosphäre möglichst lange zum Verweilen im Shop zu bringen, sondern sie durch eine gewisse Leichtigkeit und Einfachheit von den vielen Alltagssorgen abzulenken“, analysiert Klaus Monhoff, Leiter Dekor- und Designmanagement bei Egger Holzwerkstoffe. Lebendige Feelgood-Szenarios sind gefragt und geprägt von „Überraschung, Individualisierung, Kreativität, Erlebnis, Innovation, Sinnlichkeit, Komfort“, so Eleonora Zappanico, Marketing Operation Manager beim italienischen High-Tech-Textilspezialisten S.I. Srl. Allen Details, die die Sinne berühren, kommt wachsende Beachtung zu, auch eine samtig-schmeichelnde Oberfläche ist haptische Willkommensgeste und erhöht die Aufenthaltsqualität in einem Store.

Die funktionalen Eigenschaften nehmen allgemein an Bedeutung zu, es werden performante Alleskönner für reibungsarme Prozessabläufe gesucht: Robustheit für eine erhöhte Langlebigkeit, gut desinfizierbare, leicht zu reinigende und Antifingerprint-Oberflächen. Dekore und Werkstoffe sollen vielseitig einsetzbar und super miteinander kombinierbar sein, alles flexibel, schnell verfügbar und in größtmöglicher Vielfalt.

Während die „inneren Werte“ an Relevanz zunehmen, tritt die plakative Optik etwas in den Hintergrund zugunsten gemäßigterer Oberflächen. Hölzer haben nicht mehr die ganz markante, rustikale Maserung, reines Weiß wird seit Corona von gebrochenen Tönen und warmer Farbigkeit abgelöst, eine gewisse Reduktion beim Design ist allseits erkennbar, Harmonie gewinnt.

Vom Charme der Natur
Warme Holzoptiken, Beton-Look, Stein- und Mauerwerk-Verkleidungen an Wänden, Böden und den Ladenmöbeln – naturnahe, authentische Oberflächen passen nach wie vor ins Bild. Auffällig ist, dass typische Outdoor-Texturen zunehmend in die Innen- und Ladenräume wandern und die Grenzen zwischen Außen und Innen aufheben. „Farben und Materialien aus der Natur, die das Einkaufserlebnis bereichern, sind ein Trend, der im biophilen Design seinen maximalen Ausdruck findet“, so Francesco Maffei vom italienischen Fliesenhersteller Ceramiche Keope. Ein „Raw Earth Effect“ wurde bei Keope der Bodenfliesen-Serie ‚Geo‘ zugrunde gelegt: Fliesen mit Toneffekt, die die optische Unvollkommenheit von Erde in ihr – dabei sehr elegantes – Design übersetzen.

Bei imi surface design, Spezialist für originalgetreue Oberflächen wie z.B. Beton-, Rost-, Altholz- und Steinoptik für unterschiedliche Trägermaterialien, ist eine schöne helle Kalkstein-Optik als biegbare und versiegelte Variante neu im Programm. Mit herkömmlichem Tischlerwerkzeug zu verarbeiten, lassen sich damit Wände, Böden und selbst Möbelstücke in der eigentlich spröden, porösen Textur von Kalkstein gestalten, die dann aber eben nicht bröseln und bröckeln, sondern die im Ladenbau erforderliche Festigkeit und Strapazierfähigkeit aufweisen.

Neue Hölzer
Diversifizierung kennzeichnet die Holzoptiken. Bisher dominierten im Ladenbau die Klassiker Nuss und Eiche, nun sei die Zeit reif für neue Akzente, so David Lahnsteiner aus der Dekorentwicklung bei Kaindl, Hersteller von Dekor- und Schichtstoffverbundplatten und -Böden. „Schön, ausgewogen und elegant setzen die Nadelhölzer Abies, Polar Pine und Fichte neue Trends im Interior-Design.“ Beim Bestseller Eiche wird die Hell-Dunkel-Skala ausgebaut. „Die Dekorfamilie der Eiche Evoke zeigt schier grenzenlose Möglichkeiten im Bereich „Dark & Light“. Die fast schwarze "Infinity" greift den aktuellen Trend nach dunklen homogenen Holztönen auf, die helle jugendliche "Light“ mit ausgeprägten Farbkontrasten ist die perfekte Kombination zu vielen Uni-Farbtönen“, so Lahnsteiner.

Besonders authentisch wirken Naturoptiken auf Trägermaterialien durch eine dekorgleiche dreidimensionale Strukturprägung – die sog. Synchronprägung oder Synchronpore, die die Textur von Stein und Beton oder die charakteristische Maserung von Hölzern auch haptisch hervorhebt. Bei Egger Holzwerkstoffe hat man noch einen draufgesetzt und unter dem Namen ‚PerfectSense Feelwood‘ die Synchronporen-Oberflächen mit einem matten Lackfinish und Anti-Fingerprint-Eigenschaft veredelt – auf einem emissionsarmen Holzwerkstoffträger mit Recyclinganteil.

Design 4.0
Helles Holz an Betonoptik, Marmoreffekte neben hochglänzendem Farblack, derber Bruchstein kombiniert mit changierendem Acrylglas oder auch Spiegelrelief – in unüblichen Materialkontrasten, die die Sehgewohnheiten überraschen, liegt Innovationspotenzial. „Dass die Designs Aufmerksamkeit erregen, jedoch nicht vom Produkt ablenken, und etwas Besonderes sind, das man nicht überall sieht, das sind die Herausforderungen für Store-Architekten“, so Julian Theisen, Geschäftsführer bei Sibu Design, österreichischer Spezialist für Design-Paneele. Lebendige Oberflächen der Design-Panels, Reliefs und Strukturen, samtig-matte Oberflächen sind bei Sibu Design im Fokus. Auch „Spiegeloberflächen in den verschiedensten Farben, glatt bis grob strukturiert, sind nach wie vor sehr gefragt. Besonders oft stellen wir die genauen Farben des Corporate Designs nach; von der Spiegel- bis zur Stoffoberfläche. Auch der Anteil an gedruckten und gestanzten Logos steigt an“, ergänzt Theisen. – Customizing, einzigartige Details, die sich abheben, individuell konfektionierte Elemente gewinnen an Bedeutung.

Fundstücke aus der Manufaktur
Store-Design im gehobenen Level greift verstärkt auf (kunst)handwerklich Gefertigtes aus Manufaktur-Betrieben zu, um sich gegenüber Wettbewerbern, Mainstream und Discount zu profilieren. Auch diesbezüglich wird man auf der EuroShop 2023 reichlich fündig. Etwa bei der Glashütte Lamberts aus Waldsassen. Die Faszination mundgeblasener farbiger Flachgläser, die zunächst in der hochwertigen Architektur, internationalen Hotels und bei Luxusmarken Anwendung fanden, haben inzwischen auch die Gastro-Szene, Bäckereien und Handelshäuser für sich entdeckt. Sie kommen für Vitrinen, Glasgestaltung für Trennwände und hinterleuchtete Wandverkleidungen, Deckenverglasungen (Kuppelverglasungen, etc.) und Design-Leuchten, Tresen, Möbel, Tische, Fassaden und Fenster zum Einsatz.

Auch die Zahna-Fliesen GmbH ist so ein Manufaktur-Betrieb, der in Handarbeit mehrfarbige unglasierte Fliesen nach historischem Vorbild in Kleinserien herstellt. Oder auch das portugiesische Pendant Viúva Lamego, das neben industrieller Stückzahl-Fertigung auch die portugiesische Tradition der handbemalten Taylor-made-Fliesen lebendig hält. Durch Kollaborationen mit internationalen Künstlern und Architekten werden neue Einsatzgebiete ausgelotet und z.B. Wandfreskos aus Fliesen – modern bis retro – für Gasträume realisiert.

Auch die filigranen High-Tech-Vorhänge und Raumteiler aus Textil oder Kettengliedern von Herstellern wie i-mesh oder Kriskadecor seien hier erwähnt. Deren semitransparente Szenografie dient in Store-Konzepten hochkarätiger Marken wie Dior, Natuzzi und den niederländischen Luxus-Warenhäusern von de Bijenkorf als Struktur- und Design-Element.

Flexibel, digital und crossmedial
Flexibilität ist auch bei Material-Anbietern zum zentralen Stichwort geworden. Digitalisierung und Technologie-Einsatz erfordern von Läden flexiblere, wandelbare Einrichtungskonzepte und mehr Eventcharakter, Ladenräume werden häufig als dynamische, multifunktionale und vielseitig nutzbare Umgebungen konzipiert. Daher sind Lösungen gefragt, die einen schnellen Umbau erlauben. Sibu Design etwa bietet Dekorplatten mit Magnetrücken, die perfekt geeignet sind, um mit wenigen Handgriffen umzudekorieren und ein frisches Ambiente zu erzeugen.

Auch ein Fotoboden – fotorealistisch bedruckbarer Vinyboden von visuals united – wird nicht mehr nur als „Kundenstopper“ und temporäre Werbefläche am POS eingesetzt, berichtet Silke Hüsgen von der visuals united AG. „Mutige Kunden nutzen ein kreatives Design auf einem Fotoboden in Kombination von Augmented-Reality-Content, um die analoge Welt am POS mit der digitalen zu kombinieren“, so Silke Hüsgen von der visuals united AG. Denn: „Die letzten Jahre haben die Welt auf den Kopf gestellt. Nicht nur die Pandemie, auch die Auswirkungen des Ukraine-Kriegs erfordern neue bzw. andere Produktions-, Kommunikations- und Vertriebswege. Vom Retail fordert diese Situation zukunftsweisende Lösungen in den Bereichen ‚Nachhaltigkeit‘ und einen ‚crossmedialen POS‘.“

Recycling-Design auf grünen Wegen
Ausnahmslos alle Hersteller von Fliesen, Holz- und Verbundwerkstoffen, Dekorpaneelen und Sonderprodukten für den Ladenbau haben es auf dem Schirm: Die aktuell größte Herausforderung ist, ressourcenschonende Prozesse und nachhaltige Produkte und mittelfristig den Umbau zu geschlossenen Material- und Produktionskreisläufen anzustoßen und damit tragfähige Zukunftsperspektiven für den Ladenbau zu entwickeln, der von Wechsel und Veränderung lebt und damit nicht ganz optimal zu Nachhaltigkeit und Zirkulärwirtschaft passt. Sollte man meinen. „Würden wir ganz anders betrachten, denn unter dem Nachhaltigkeits-Aspekt müsste die beschichtete Spanplatte eigentlich einen Umwelt-Nobelpreis bekommen“, räumt Klaus Monhoff von Egger Holzwerkstoffe ein. „Begonnen bei der Herstellung, bei der schon ein hoher Anteil Recyclingholz eingesetzt wird, kann die Platte nach der Verwendung zum Ende des Lebenszyklus auch wieder zu 100 Prozent recycelt werden und bleibt also komplett im eigenen Umweltkreislauf.“

Eine Reihe marktfähiger ‚Win-win-Lösungen‘, die die Anforderungen an Umweltverträglichkeit mit den qualitativen Anforderungen von Store-Architekten zusammenbringen, präsentiert Bencore, italienischer Hersteller von Verbundplatten und Mitglied des Green Buiding Councils Italia, dem dortigen Verband für nachhaltiges Bauen. Darunter ‚Wasbottle‘, ein Kunststoff aus recycelten Kunststoffflocken, der gemeinsam mit Autogrill entwickelt wurde, um den anfallenden Abfall des Travelfood-Unternehmens wiederzuverwerten. Das Schmelzen und Verpressen der bunten Flocken kreiert eine ganz eigene Recycling-Ästhetik in fröhlich bunter Terrazzo-ähnlicher Anmutung, die sich sehen lassen kann. Kommentar Bencore: „Wir sind der festen Überzeugung, dass die Herstellung von recycelten und recycelbaren Produkten ein Muss für Marken und Lieferanten sein sollte.“

Source:

EuroShop Messe Düsseldorf