From the Sector

Reset
60 results
Akhlaq Hussain Photo OETI
Akhlaq Hussain
28.09.2023

OETI opens sales office in Pakistan

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Akhlaq Hussain’s main goal is to ‘create visibility for the OETI brand in Pakistan. We want to offer sustainable, reliable, and competitive services to Pakistan’s textile industry. My aim is to foster Pakistan’s exports by offering more sustainable certifications and training in environmental and social topics as well as due diligence in supply chains, which are in high demand in European countries.’

Markus Lang’s - OETI’s Global Head of Marketing & Sales – main goal is to ‘increase the awareness of sustainability within Pakistan’s textile and leather industry, which is also the main objective of our future development.’

More information:
Pakistan OETI
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

RISE® Innovation Award INDA Association of the Nonwoven Fabrics Industry
25.08.2023

RISE® Innovation Award 2023: Four Finalists

INDA, the Association of the Nonwoven Fabrics Industry, announced the finalists that will compete for the RISE® Innovation Award. RISE®, the Research, Innovation & Science for Engineered Fabrics Conference, will take place September 26-27 at Talley Student Union, North Carolina State University, Raleigh, NC.

The finalists who will present their product innovations on Tuesday, September 26th, include:

ESC-8 – The JOA® Electronic Size Change Unit by Curt G. Joa, Inc.
The JOA® ESC-8™ unit allows unprecedented Adult Pant design flexibility with the ability to process nearly limitless combinations of insert and chassis sizes at industry best speeds. Additionally, this technology enables the production of a greener, more sustainable product by eliminating up to 250 tons of material, 5 tons of glue, and 500 tons of greenhouse gas emissions every year.

INDA, the Association of the Nonwoven Fabrics Industry, announced the finalists that will compete for the RISE® Innovation Award. RISE®, the Research, Innovation & Science for Engineered Fabrics Conference, will take place September 26-27 at Talley Student Union, North Carolina State University, Raleigh, NC.

The finalists who will present their product innovations on Tuesday, September 26th, include:

ESC-8 – The JOA® Electronic Size Change Unit by Curt G. Joa, Inc.
The JOA® ESC-8™ unit allows unprecedented Adult Pant design flexibility with the ability to process nearly limitless combinations of insert and chassis sizes at industry best speeds. Additionally, this technology enables the production of a greener, more sustainable product by eliminating up to 250 tons of material, 5 tons of glue, and 500 tons of greenhouse gas emissions every year.

BicoBio Fiber by Fiberpartner ApS
The BicoBio Fiber is a bicomponent fiber core sheath construction, developed from materials with a low carbon footprint. This fiber is designed to biodegrade in the environments where most plastics are found: landfills and the ocean. The fiber’s BioBased PE is produced from sugar cane and has a negative carbon footprint. The fiber’s recycled PET is GRS certified. PrimaLoft® Bio™, a technology that enables polyester fibers to biodegrade, is utilized in the production of BicoBio Fibers. These fibers can be processed with a variety of nonwoven technologies.

Reifenhäuser Reicofil RF5 XHL by Reifenhäuser REICOFIL GmbH & Co. KG
Reicofil XHL (Extra High Loft) is the game changer for a super soft and drapeable nonwoven offering an incomparable feel the nonwoven market has never seen before. The outstanding soft touch is unique and intended for use in the hygiene sector. XHL focuses on low basis weight and high thickness with the best visual appearance. The high performance and efficient use of raw materials and energy ensure cost-effectiveness and environmentally-friendly production.

SAPMonit by TiHiVE
TiHive’s game-changing innovation, SAPMonit – a visionary French technology breakthrough – inspects millions of diapers weekly. SAPMonit delivers lightning-speed inline inspection of Super Absorbents weight and distribution, optimizes resources, detects flaws, and accelerates R&D. SAPMonit utilizes advanced see-through cameras, high-speed vision algorithms, and secure cloud integration, revolutionizing industry norms. SAPMonit has great potential for sustainability, cost reduction, and enhanced customer satisfaction.

The RISE Innovation Award winner will be announced Wednesday afternoon, September 27th.

More information:
INDA RISE®
Source:

INDA Association of the Nonwoven Fabrics Industry

20.06.2023

New EU chemicals enforcement project to focus on products sold online

ECHA’s Enforcement Forum agreed to launch an EU-wide project to check that products sold online comply with REACH restrictions and the requirements of the Classification, Labelling and Packaging (CLP) Regulation. Its subgroup on Biocidal Products Regulation, BPRS, agreed to launch a project on labelling of biocidal products.

The Enforcement Forum including its BPR subgroup (BPRS) is a network of enforcement authorities from the EU and EEA. They are responsible for coordinating the enforcement of the REACH, CLP, PIC, POPs and the Biocidal Product Regulations with the aim of protecting our health and the environment while ensuring a level playing field for companies across the EU market.

ECHA’s Enforcement Forum agreed to launch an EU-wide project to check that products sold online comply with REACH restrictions and the requirements of the Classification, Labelling and Packaging (CLP) Regulation. Its subgroup on Biocidal Products Regulation, BPRS, agreed to launch a project on labelling of biocidal products.

The Enforcement Forum including its BPR subgroup (BPRS) is a network of enforcement authorities from the EU and EEA. They are responsible for coordinating the enforcement of the REACH, CLP, PIC, POPs and the Biocidal Product Regulations with the aim of protecting our health and the environment while ensuring a level playing field for companies across the EU market.

Inspections in this REACH-EN-FORCE (REF)-13 project will take place in 2025. The objective is to check that products, such as toys, common household goods or chemicals, sold online comply with REACH restrictions. Inspectors will also check that mixtures are classified, labelled and packaged in line with CLP and that online offers include the required information about the hazards of the mixture. Inspectors may also check compliance with restrictions under the Persistent Organic Pollutants (POPs) Regulation and the Restriction of Hazardous Substances (RoHS) Directive.

The online sale of chemicals is an area of high non-compliance. In a previous Forum project (REF-8), inspectors often found that mixtures and articles sold online contained restricted hazardous substances, including those causing cancer. The project found that 78 % of controlled mixtures or articles did not fulfil the conditions of REACH restrictions.

In the upcoming project, inspectors can rely on stricter rules governing online sales, such as the Digital Services Act and General Product Safety Regulation. These new laws are expected to make enforcement stronger.

The Forum’s subgroup on Biocidal Products Regulation (BPRS), agreed that the next major enforcement project on biocides (BEF-3) will focus on controlling the correctness of product labels for biocidal products. Inspectors will check that the information on the labelling of biocides corresponds to that what has been authorised and included in the Summary of Product Characteristics. Inspectors may also check the presence and quality of information in the Safety Data Sheets, where it is required for biocidal products.

Both REF-13 and BEF-3 projects will be prepared in 2024, inspections are planned for 2025 and reports are expected to be published in 2026.

During the meeting, the Forum members elected a new chair and vice chair. Henrik Hedlund (SE) will start as the Forum chair and Katja vom Hofe (DE) and Maria Orphanou (CY) will be the vice chairs as of 21 June 2023. Its biocides subgroup elected Helmut de Vos (BE) as chair and Jenny Karlsson (SE) and Eugen Anwander (AT) as vice chairs.

Source:

European Chemicals Agency

06.06.2023

Hohenstein celebrates 30 years of accreditation

On June 9, Hohenstein celebrates World Accreditation Day (WAD2023) along with 30 years as an accredited testing laboratory. In 1993, Hohenstein’s first lab received official certification to test textile products competently, reliably and impartially according to internationally recognized standards. With the expansion of its testing business, the company, headquartered in Boennigheim, Germany, has since gained numerous other accreditations for its global laboratories.

"The accreditations give our customers confidence that we comply with the required quality control procedures," says Julia Seeberg, who as Head of Quality Management also oversees the regular monitoring of the laboratories by DAkkS, the Deutsche Akkreditierungsstelle. “Everything possible is done to ensure the integrity of the test results.” In addition to DAkks accreditations of the testing laboratories for textile technological, biological, chemical and physical tests, Hohenstein is accredited as a certification and inspection body. Hohenstein's 75 years of expertise in the testing business complement its accreditation and provide an important basis for its long-standing customer trust.

On June 9, Hohenstein celebrates World Accreditation Day (WAD2023) along with 30 years as an accredited testing laboratory. In 1993, Hohenstein’s first lab received official certification to test textile products competently, reliably and impartially according to internationally recognized standards. With the expansion of its testing business, the company, headquartered in Boennigheim, Germany, has since gained numerous other accreditations for its global laboratories.

"The accreditations give our customers confidence that we comply with the required quality control procedures," says Julia Seeberg, who as Head of Quality Management also oversees the regular monitoring of the laboratories by DAkkS, the Deutsche Akkreditierungsstelle. “Everything possible is done to ensure the integrity of the test results.” In addition to DAkks accreditations of the testing laboratories for textile technological, biological, chemical and physical tests, Hohenstein is accredited as a certification and inspection body. Hohenstein's 75 years of expertise in the testing business complement its accreditation and provide an important basis for its long-standing customer trust.

Hohenstein laboratories in China, Bangladesh, Hong Kong and India have accreditations from the respective national and international accreditation bodies. The labs celebrate World Accreditation Day by highlighting the importance of accredited laboratories for the product quality and sustainability. "The demands of suppliers and consumers have increased," Julia Seeberg also notes. “For manufacturers to remain credible, it is even more imperative to demonstrate compliance with defined and standardized quality criteria.”

The globally valid quality standard for testing and calibration laboratories is DIN EN ISO/IEC 17025. The standard specifies general requirements for the competence, impartiality and uniform working methods of laboratories that operate internationally. Accreditations in accordance with DIN EN ISO/IEC 17020 and 17065 exist for the inspection and certification bodies. In addition, Hohenstein is an accredited testing laboratory for medical devices, where biological, chemical and physical laboratory tests are carried out. These tests form the basis for conformity with the European Medical Device Regulation (MDR).

Source:

Hohenstein

(c) KARL MAYER GROUP
02.06.2023

KARL MAYER GROUP with sustainable technical textiles at ITMA

KARL MAYER GROUP will be presenting a WEFTTRONIC® II G at the ITMA with new features and upgrades for greater efficiency. This warp knitting machine with weft insertion produces lattice structures from high-strength polyester, which are firmly established in the construction industry in particular. With a working width of 213", it offers productivity and further advantages through design innovations. New features include weft thread tension monitoring, management and the new VARIO WEFT laying system. The component for the weft insertion aims at maximum flexibility. It allows the patterning of the weft yarn to be changed quickly and easily electronically, without mechanical intervention during yarn insertion and without limits on repeat lengths. In addition, there is less waste.

KARL MAYER GROUP will be presenting a WEFTTRONIC® II G at the ITMA with new features and upgrades for greater efficiency. This warp knitting machine with weft insertion produces lattice structures from high-strength polyester, which are firmly established in the construction industry in particular. With a working width of 213", it offers productivity and further advantages through design innovations. New features include weft thread tension monitoring, management and the new VARIO WEFT laying system. The component for the weft insertion aims at maximum flexibility. It allows the patterning of the weft yarn to be changed quickly and easily electronically, without mechanical intervention during yarn insertion and without limits on repeat lengths. In addition, there is less waste.

The KARL MAYER GROUP also supports its customers with well thought-out Care Solutions. The new support offers include retrofit packages for retrofitting control and drive technology for weft insertion and composite machines, and service packages that bundle various services. These include machine inspections and the replacement of all drive belts. The customer benefits from fixed prices that cover the costs of technician assignments, various discount options and transparent services.

A new solution for the vertical greening of cities is presented from the field of application for technical textiles. The core of the innovation is a grid textile produced on warp knitting machines with weft insertion by KARL MAYER Technische Textilien GmbH. The knitted lattice fabric is made of flax. It is used as a climbing aid for fast-growing plants, and after the greening phase, in autumn, it can be recycled together with these plants as biomass in pyrolysis plants to produce electricity and activated carbon. In summer, the planted sails lower the ambient temperature through evaporation effects. In addition, photosynthesis creates fresh air and binds CO2. Other important advantages are low soil requirements and flexible placement in public spaces. The greening system was developed by the company Micro Climate Cultivation, OMC°C, with the support of KARL MAYER Technische Textilien.

The KARL MAYER GROUP will also be exhibiting a sustainable composite solution made from natural fibres. The reinforcing textile of the innovative lightweight material is a multiaxial non-crimp fabric, which was also produced from the bio-based raw material flax on a COP MAX 4 from KARL MAYER Technische Textilien. The boatbuilding specialist GREENBOATS uses natural fibre composites to achieve sustainable products. The fact that it succeeds in this is shown, for example, by the Global Warming Potential (GWP): 0.48 kg of CO2 per kilogram of flax reinforcement compares with 2.9 kg of CO2 per kilogram of glass textile.

Source:

KARL MAYER Verwaltungsgesellschaft mbH

Photo PCMC
02.04.2023

PCMC names Windell McGill as Product Launch Manager

Paper Converting Machine Company (PCMC)—which specializes in the design and manufacture of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries worldwide—announced that Windell McGill has joined the organization as the Product Launch Manager for its print business segment.

Bringing more than 25 years of print industry experience to PCMC, McGill will oversee product management, product launch and brand expansion for all PCMC print products and services.

Prior to joining PCMC, McGill was Managing Partner of ePac Atlanta, a provider of custom, high-quality flexible packaging solutions and digital printing services. Before that, he served as Business Segment Manager for flexible packaging at HP Indigo. McGill’s extensive experience also includes more than 15 years with Advanced Vision Technology, a provider of camera-based inspection equipment for the packaging market, where he held a variety of sales roles before being named President-Americas.

McGill will operate from his office in Atlanta.

Paper Converting Machine Company (PCMC)—which specializes in the design and manufacture of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries worldwide—announced that Windell McGill has joined the organization as the Product Launch Manager for its print business segment.

Bringing more than 25 years of print industry experience to PCMC, McGill will oversee product management, product launch and brand expansion for all PCMC print products and services.

Prior to joining PCMC, McGill was Managing Partner of ePac Atlanta, a provider of custom, high-quality flexible packaging solutions and digital printing services. Before that, he served as Business Segment Manager for flexible packaging at HP Indigo. McGill’s extensive experience also includes more than 15 years with Advanced Vision Technology, a provider of camera-based inspection equipment for the packaging market, where he held a variety of sales roles before being named President-Americas.

McGill will operate from his office in Atlanta.

Source:

PAPER CONVERTING MACHINE COMPANY (PCMC)

09.01.2023

Shelton Vision AI: Tailored machine learning solutions for the textiles industry

Over the past three years, a dedicated AI development team at BTMA member Shelton Vision has been developing tailored machine learning solutions for the textiles industry.

The aim has been to elevate the detection process and the accuracy of naming and grading subtle defects in textiles, in real time within production environments.

“Big Data ‘off-the-shelf’ systems such as those behind technolgies like facial recognition and Google Maps involve reading many thousands of single images each second and simply take too long to accumulate sufficient data for what’s required in this specific case,” says Shelton Vision CEO and Managing Director Mark Shelton. “A feature of the textile industry is that in many sectors, the product range changes several times within a year and it is not uncommon to have to inspect hundreds, if not thousands of different styles in a year based on precise settings.”

In terms of defect types, he adds, there may typically be over 100 that need to be accurately detected, classified (named) and graded in real time.

Over the past three years, a dedicated AI development team at BTMA member Shelton Vision has been developing tailored machine learning solutions for the textiles industry.

The aim has been to elevate the detection process and the accuracy of naming and grading subtle defects in textiles, in real time within production environments.

“Big Data ‘off-the-shelf’ systems such as those behind technolgies like facial recognition and Google Maps involve reading many thousands of single images each second and simply take too long to accumulate sufficient data for what’s required in this specific case,” says Shelton Vision CEO and Managing Director Mark Shelton. “A feature of the textile industry is that in many sectors, the product range changes several times within a year and it is not uncommon to have to inspect hundreds, if not thousands of different styles in a year based on precise settings.”

In terms of defect types, he adds, there may typically be over 100 that need to be accurately detected, classified (named) and graded in real time.

“Added to this is the need to ‘filter out’ the random occurrence of ‘non defects’, such as loose threads, lint and dust on the surface – the number of which can be higher than actual defects – and it is clear that a bespoke system is required.”
The development team has consequently established metadata for identifying defect properties, enabling the successful identification of faults from a much smaller number of images.

“The system employs a unique combination of machine learning for automated style training and novel algorithms for defect detection, to provide high quality images for the AI real time defect classification and grading software,” Shelton explains. “Due to the inherent variation in fabric features – raw materials, construction, texture, colour and finishes, as well as the differing product quality standards in value chains and the regional variations in what defects are called – our AI engine uses models built for each individual company or group of companies, or product value chain.”

The AI models are constructed so that the user operatives can populate them with their own data produced by the vision system or by obtaining defect images from another imaging source (eg a mobile phone camera).  

The occurrence of defects is sporadic and many defect types occur infrequently, although when they do, they can have severe consequences. These scenarios re-enforce the need for the AI engine to be quickly set up and able to operate accurately with limited data sets of typically between 30 and 50 good quality images per defect type.

A further feature is a tool enabling the user to periodically ‘clean up’ the AI data during the set up phase. This is used to resolve conflicting data and to correct mis-named images.

Generally, the highest cost component of fabric production is the raw material and in addition to finished product inspection, a cost effective use for vision systems is in process operation.

Generally, the highest cost component of fabric production is the raw material and in addition to finished product inspection, a cost effective use for vision systems is in process operation.

“There is a need for the real time detection of defects that are being created in separate processes, such as printing or coating and for real time automated systems that can accurately determine the defects and their severity and provide a reliable signal for an operative to rectify the issue, This can result in considerable savings.

Prior to Shelton introducing powerful customised machine vision and real time defect classification, the only systems available were those that required manual sifting through vast numbers of images, which included both real defects and ‘non defect’ images. The task was very often overwhelming and did not provide much benefit beyond manual fabric inspection.

More information:
Shelton Vision fabric inspection
Source:

AWOL for British Textile Machinery Association (BTMA)

(c) Hohenstein
13.12.2022

Hohenstein: New testing lab in Shanghai

With the opening of another laboratory in Shanghai, China, testing service provider Hohenstein is growing its international network. Starting in the first quarter of 2023, the new textile laboratory in the Pudong District industrial park will supplement the Hong Kong laboratory capacity with testing and on-site inspection services in the hot spots of textile production.

The new laboratory will offer suppliers, manufacturers, brands, and retailers a wide range of testing service on textile quality. "Hohenstein stands for innovation and quality. We are very pleased to celebrate another milestone in our international expansion, while following these principles," said Prof. Dr. Stefan Mecheels, who is the third generation to lead the family-run company. "No matter where the examinations, tests and analyses are carried out, all our laboratories work with state-of-the-art equipment and the same high standards."

The laboratory locations in Germany, Hungary, Hong Kong, Bangladesh, India and now Shanghai, offer shortened turnaround and sample transport times. In some locations, Hohenstein offers sample pick up services from the customer to the lab for testing.

With the opening of another laboratory in Shanghai, China, testing service provider Hohenstein is growing its international network. Starting in the first quarter of 2023, the new textile laboratory in the Pudong District industrial park will supplement the Hong Kong laboratory capacity with testing and on-site inspection services in the hot spots of textile production.

The new laboratory will offer suppliers, manufacturers, brands, and retailers a wide range of testing service on textile quality. "Hohenstein stands for innovation and quality. We are very pleased to celebrate another milestone in our international expansion, while following these principles," said Prof. Dr. Stefan Mecheels, who is the third generation to lead the family-run company. "No matter where the examinations, tests and analyses are carried out, all our laboratories work with state-of-the-art equipment and the same high standards."

The laboratory locations in Germany, Hungary, Hong Kong, Bangladesh, India and now Shanghai, offer shortened turnaround and sample transport times. In some locations, Hohenstein offers sample pick up services from the customer to the lab for testing.

Source:

Hohenstein

Photo VDMA
12.12.2022

Young Talent Award for AI supported production control of carbon fibres

  • Formula 1 cars will be cheaper in future

Carbon is the stuff Formula 1 cars are made of, at least the bodywork. But until now, carbon has been expensive. It can be produced more cheaply and efficiently if artificial intelligence monitors the production processes. A camera system combined with artificial intelligence automatically detects defects in the production of carbon fibres. This makes expensive manual inspection of the carbon fibres obsolete and the production price of the carbon fibre can be reduced in the long term.

For this idea, the young engineer Deniz Sinan Yesilyurt received the second prize of the "Digitalisation in Mechanical Engineering" Young Talent Award on 6 December.

  • Formula 1 cars will be cheaper in future

Carbon is the stuff Formula 1 cars are made of, at least the bodywork. But until now, carbon has been expensive. It can be produced more cheaply and efficiently if artificial intelligence monitors the production processes. A camera system combined with artificial intelligence automatically detects defects in the production of carbon fibres. This makes expensive manual inspection of the carbon fibres obsolete and the production price of the carbon fibre can be reduced in the long term.

For this idea, the young engineer Deniz Sinan Yesilyurt received the second prize of the "Digitalisation in Mechanical Engineering" Young Talent Award on 6 December.

Carbon fibres are sought after because of their good properties. They are very light - they weigh up to 50 percent less than aluminium. The combination of low weight and good mechanical properties offers many advantages. Especially in times of the energy transition, lightweight materials like carbon are more relevant than ever before. At the same time, carbon fibres are as resistant to external stresses as metals. However, achieving these good properties of carbon fibres is very complex.


Up to 300 individual fibre strands - bundles of individual fibres - have to be monitored simultaneously during production. If carbon fibres tear, it costs time and money to sort out the damaged fibres. This is just one example of various defects that can occur in the fibres during production.


Therefore, Deniz Sinan Yesilyurt attached a camera to the carbon fibre line that takes pictures of various fibre defects during production and collects them in a database. The artificial intelligence in the camera's information technology system evaluates the fibre defects by assigning the images to predefined reference defects. In doing so, it recognises various fibre defects with a classification accuracy of 99 per cent. The process can also be used in other areas that produce chemical fibres.

Deniz Sinan Yesilyurt received the prize from the German Engineering Federation (VDMA) in Frankfurt am Main, Germany. He is a Bachelor's graduate at the Institut für Textiltechnik (ITA) of RWTH Aachen University. The full title of his bachelor's thesis is: "Development of a Kl-supported process monitoring using machine learning to detect fibre damage in the stabilisation process". The VDMA awarded the prize to a total of four theses from different universities. The prize is awarded for outstanding theses and was offered in Germany, Austria and Switzerland.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen Universit

04.10.2022

Hexcel HexPly® M9.6 Prepregs receive Bureau Veritas Type Approval

Hexcel Corporation has received Type Approval for its HexPly® M9.6GF prepreg products from Bureau Veritas (BV), a leader in testing, inspection, and certification services.

This certification enables carbon fiber-reinforced epoxy prepregs to be used in the production of parts for all BV-approved marine vessels. It also guarantees the quality, performance and consistency of the prepregs for ship and boat builders.

BV-approved HexPly M9.6GF prepregs can be reinforced with unidirectional, non-crimp and twill-weave fabrics. They are particularly suitable for use in the manufacture of masts and other large structural components for wind-assisted ship propulsion (WASP). To reduce reliance on engines and cut fuel usage, WASP vessels harness the power of ocean winds often using large carbon fiber-reinforced masts flying durable composite solid sails.

Hexcel Corporation has received Type Approval for its HexPly® M9.6GF prepreg products from Bureau Veritas (BV), a leader in testing, inspection, and certification services.

This certification enables carbon fiber-reinforced epoxy prepregs to be used in the production of parts for all BV-approved marine vessels. It also guarantees the quality, performance and consistency of the prepregs for ship and boat builders.

BV-approved HexPly M9.6GF prepregs can be reinforced with unidirectional, non-crimp and twill-weave fabrics. They are particularly suitable for use in the manufacture of masts and other large structural components for wind-assisted ship propulsion (WASP). To reduce reliance on engines and cut fuel usage, WASP vessels harness the power of ocean winds often using large carbon fiber-reinforced masts flying durable composite solid sails.

HexPly M9.6 prepregs were recently used to manufacture the mast for the Chantiers de l’Atlantique Silenseas project. The HexPly M9.6 prepregs satisfied all the requirements of the Silenseas consortium’s mast-section manufacturers for quality, mechanical performance, and processing characteristics, while also proving to be cost effective.

Source:

Hexcel Corporation / 100% Marketing

(c) BTMA by AWOL Media
08.09.2022

Shelton Vision presents new fabric inspection technique

A new fabric inspection technique for accurately detecting the most subtle of defects on patterned fabrics during high speed production has been developed by BTMA member Shelton Vision, of Leicester, UK.

The patent-pending system has been integrated into the company’s WebSpector platform and validated through factory trials on a purpose-built full scale in-house demonstration system with sophisticated fabric transport capabilities. As a result, a first system has already been ordered by a manufacturer of both plain and patterned fabrics, including camouflage, in Colombia. This follows the successful conclusion of a 21-month Innovate UK project in which techniques for the resolution of complex pattern deformations were developed by machine vision and computer scientists in the company, backed up by the machine vision and robotics department at Loughborough University.

A new fabric inspection technique for accurately detecting the most subtle of defects on patterned fabrics during high speed production has been developed by BTMA member Shelton Vision, of Leicester, UK.

The patent-pending system has been integrated into the company’s WebSpector platform and validated through factory trials on a purpose-built full scale in-house demonstration system with sophisticated fabric transport capabilities. As a result, a first system has already been ordered by a manufacturer of both plain and patterned fabrics, including camouflage, in Colombia. This follows the successful conclusion of a 21-month Innovate UK project in which techniques for the resolution of complex pattern deformations were developed by machine vision and computer scientists in the company, backed up by the machine vision and robotics department at Loughborough University.

Restrictions
Traditional methods for defect detection rely on human inspection which is ineffective, with detection rates under 65%, while the Shelton WebSpector machine vision system offers a sophisticated platform for automated defect detection of over 97%, but until now has been restricted to plain textiles.

While pattern matching and neural network approaches have previously been tried for patterned textiles, they have failed to provide a practical solution due to the extreme complexity associated with pattern matching on deformable substrates like textiles, as well as the time required to train a neural network for each pattern type.

Challenges
The challenge is that fabrics are not rigid and can be creased or stretched and are also subject to local distortion,” says Shelton Vision Managing Director and CEO Mark Shelton. “As a result, inspection without the technique we have developed, would lead to thousands of false positives. Our sophisticated pattern inspection software techniques ensure a clean image, allowing the detection of faults on fabrics running at speeds of up to a hundred metres a minute.”

The full system consists of:

  • A camera and lighting system for optimum image capture at high speed and associated image processing hardware.
  • Self-training software utilising statistical analysis to automate the system configuration for new textile products.
  • An advanced suite of defect detection algorithms for the detection of all textile defect types.
  • An AI-driven defect classification system which learns and automates defect naming in real time, as well as a real time defect grading capability based on client decision rules.
  • A system for recording and retrieving complete roll map images for subsequent review and quality control.

The generation of textile roll maps with complete defect data allows for an optimised textile cut plan, improved downstream processing and quality assurance.

Source:

BTMA by AWOL Media

08.07.2022

Swedish textile machinery in Brazil at Febratex

A delegation from TMAS, the Swedish textile machinery association, will participate in the forthcoming Febratex textile show which is being held in the German Village Park in Blumenau, in Santa Catarina, Brazil from August 23-26.

As the fourth largest textiles manufacturer in the world, Brazil’s annual revenues from textiles and apparel amount to an annual $48 billion and the industry employs around 1.5 million people directly.

As with the USA and many European countries, product shortages resulting directly from the Covid-19 pandemic, and subsequent supply chain difficulties, have emphasised to Brazil’s industry the attractiveness of more diversified and shorter supply chains which are closer to customers wherever possible. In the past two years, there has been less reliance on imports from Asia to Brazil, and opportunities are arising again for local manufacturing.

Svegea of Sweden has supplied many automatic collarette cutters to Brazilian companies, which are used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

A delegation from TMAS, the Swedish textile machinery association, will participate in the forthcoming Febratex textile show which is being held in the German Village Park in Blumenau, in Santa Catarina, Brazil from August 23-26.

As the fourth largest textiles manufacturer in the world, Brazil’s annual revenues from textiles and apparel amount to an annual $48 billion and the industry employs around 1.5 million people directly.

As with the USA and many European countries, product shortages resulting directly from the Covid-19 pandemic, and subsequent supply chain difficulties, have emphasised to Brazil’s industry the attractiveness of more diversified and shorter supply chains which are closer to customers wherever possible. In the past two years, there has been less reliance on imports from Asia to Brazil, and opportunities are arising again for local manufacturing.

Svegea of Sweden has supplied many automatic collarette cutters to Brazilian companies, which are used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

Svegea supplies many other bespoke machines for applications in the production of both garment components and technical textiles, including rewinding, measuring, inspection and band knife machines.

Eton Systems, the inventor and world’s leading provider of automated production systems for apparel and other textile-based processes, has supplied a large amount of workstations to Brazilian companies over the years, and believes its newly-launched Opta system is good news for this market becoming more efficient and profitable.

Automation is also high on the agenda of ACG Kinna Automatic, which specialises in automation solutions for filled products such as quilts, pillows and mattresses and also has extensive knowledge in areas such as bed linen and textile filters.

Given Brazil’s extensive forestry sector, the country is a key market for Texo AB, one of the world’s leading manufacturers of weaving machines for the production of paper machine clothing (PMC).

All paper manufacturing machines require a regular supply of PMC, which as large continuous engineered fabrics, carry the paper stock through each stage of the paper production process. With technologically sophisticated designs, they employ fibres and other polymeric materials in complex structures and each paper machine has an average of ten separate fabrics installed on it. Although the PMC business represents just a small proportion of the total cost of manufacturing paper, it can have a significant impact on the quality of the paper, the efficiency of a machine and machine production rates.

More information:
TMAS Febratex
Source:

AWOL Media

Advances in automation from Svegea at Texprocess 2022 (c) Svegea
With Svegea bias cutters, circular woven technical fabrics are fed via a revolving winder and slit at angles.
18.05.2022

Advances in automation from Svegea at Texprocess 2022

  • Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24  – the 70th anniversary of its automatic collarette cutter.

 On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

  • Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24  – the 70th anniversary of its automatic collarette cutter.

 On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy show in Frankfurt and a busy year,” says Svegea Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations wherever they are, and at the moment we’re seeing a lot of interest in the reshoring of operations by our customers, to bring final-stage manufacturing closer to the key European and US markets.”

E-Drive 2
The EC 300 collarette cutter on show in Frankfurt is equipped with the latest E-Drive 2 system providing the operator with a very user-friendly touchscreen, providing full control of the cutting process.

The integrated, fully automatic FA500 roll slitter accommodates diameters up to 400mm and is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Niche applications
Svegea supplies many other bespoke machines for applications in the production of both garment components and technical textiles, including rewinding, measuring, inspection and band knife machines.

The ability to produce tubular fabric which is cut on the bias allows customers to provide textiles which not only have improved drape and elasticity properties for complex and intricate shapes, but also offer ways to reduce production costs by eliminating unnecessary wastage from the manufacturing process. Pre-cutting the fabric to a specific bias reduces extra handling of the fabric in further processes, saving customers both valuable production time and costs.

Source:

AWOL Media on behalf of TMAS

(c) Baldwin Technology Company Inc.
11.05.2022

Baldwin showcases its “Complete Solution” for security print at Tax Stamp and Traceability Forum

Baldwin Technology Company Inc., an innovator of advanced color-management solutions and inspection technology for the printing industry, will present its “Complete Solution” for printing and inspection at the Tax Stamp and Traceability Forum, held May 16 to 18 in Malta.

Baldwin’s Complete Solution can be any combination of feeders (roll or sheet), vacuum tables, inspection systems, inkjet printers, UV ink-curing systems, reject gates and bins, sheet stackers, and real-time monitoring and reporting tools. Alongside Baldwin’s technologies, optional solution components can be joined together through partnerships with suppliers to create a world-class solution.

Baldwin Technology Company Inc., an innovator of advanced color-management solutions and inspection technology for the printing industry, will present its “Complete Solution” for printing and inspection at the Tax Stamp and Traceability Forum, held May 16 to 18 in Malta.

Baldwin’s Complete Solution can be any combination of feeders (roll or sheet), vacuum tables, inspection systems, inkjet printers, UV ink-curing systems, reject gates and bins, sheet stackers, and real-time monitoring and reporting tools. Alongside Baldwin’s technologies, optional solution components can be joined together through partnerships with suppliers to create a world-class solution.

For advanced defect detection, Baldwin’s Guardian PQV 100% Print Inspection camera systems can be mounted on one or both sides of the product to perform 100% print-quality inspection, verify variable data and inspect the most challenging security print features. The system offers lighting options for all materials and substrates, as well as for special applications, including holograms, covert serialization, covert security features and more. The Guardian PQV can also be retrofitted to existing presses, machines and transports.
 
As part of a data-connected defect-management workflow, the Guardian PQV is a feature-rich inline defect-detection system that enables printers to find and remove defects quickly—and monitor their processes to prevent defects from occurring again or repeatedly. This technology provides complete print-quality verification from prepress through production, reporting and archiving for perfect runs.

Baldwin recently realigned its sales teams to optimize service and simplify access to its process-improvement and consumables technologies for printing and packaging customers in more than 100 countries. Two new sales professionals have since joined the team, covering smaller regional geographies and providing customers with a single point of contact for all of Baldwin’s product lines.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  (c) EFI
EFI Fiery®
04.05.2022

Konica Minolta and EFI Fiery New Launch

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 
“With these new EFI Fiery DFEs, we continue to extend the range of what AccurioPress users can achieve,” said Olaf Lorenz, General Manager DX Branding Division Konica Minolta, Inc. “We are pleased to be the first to bring these powerful new DFE solutions into our portfolio as they bring more competitive capabilities to Konica Minolta’s digital printing portfolio.”
 
EFI Fiery FS500 Pro servers offer a higher value proposition
 
“The Fiery FS500 Pro new platform offers advanced speed, higher automation and more capability than other digital front ends,” said John Henze, vice president of sales and marketing, EFI Fiery. “Intelligent automation solutions in these new EFI Fiery DFEs also save customers labour cost and time by minimising the need for manual inspection of print jobs, improving automated u management, and eliminating the need to print a test file to determine where to place finishing lines.
 
“All this decreases cycle time and increases customers’ profit opportunities, while ensuring that they can delight their clients with printing that gets completed accurately and quickly. Reducing the time prepress and press operators must spend on these repetitive tasks also helps print business owners make staff more efficient, offsetting the difficulties they have hiring and retaining talent in today’s labour-constrained economy.”

Source:

EFI GmbH

29.04.2022

Baldwin showcases connected process technologies at Print4All

Baldwin Technology Company Inc. will showcase its latest high-performance color management, surface treatment, LED-UV curing, inspection, defect detection and Industry 4.0-based analytics solutions at Print4All, which is taking place May 3 to 6 at Fiera Milano in Italy.

One of its latest advances — which will be on display at Print4All — is the XP Quatro Series™ LED-UV curing module with one head and two frequencies for broader applications. It is designed to economically and efficiently cure LED-formulated printing inks and coatings on sheetfed and web offset printing presses, as well as on larger-format flexo presses and digital print engines. The XP Quatro Series LED-UV enhances print quality, while operating at top speeds, driving increased productivity and profitability.

Italy’s ACM Flexible Packaging selected Baldwin as its LED-UV partner and became one of the first flexible film converters to offer all LED-UV curing in a narrow to mid-web format. This partnership established LED-UV printing as a growing production standard in flexible packaging and labels. Today, ACM is a 100% LED-UV, non-mercury facility.

Baldwin Technology Company Inc. will showcase its latest high-performance color management, surface treatment, LED-UV curing, inspection, defect detection and Industry 4.0-based analytics solutions at Print4All, which is taking place May 3 to 6 at Fiera Milano in Italy.

One of its latest advances — which will be on display at Print4All — is the XP Quatro Series™ LED-UV curing module with one head and two frequencies for broader applications. It is designed to economically and efficiently cure LED-formulated printing inks and coatings on sheetfed and web offset printing presses, as well as on larger-format flexo presses and digital print engines. The XP Quatro Series LED-UV enhances print quality, while operating at top speeds, driving increased productivity and profitability.

Italy’s ACM Flexible Packaging selected Baldwin as its LED-UV partner and became one of the first flexible film converters to offer all LED-UV curing in a narrow to mid-web format. This partnership established LED-UV printing as a growing production standard in flexible packaging and labels. Today, ACM is a 100% LED-UV, non-mercury facility.

Baldwin’s Print4All booth also will showcase Industry 4.0 and industrial Internet of Things-enabled technologies that work together to achieve greater uptime, productivity and automation. Featured solutions pair sensor-gathered data with operational data from Baldwin equipment to gain live, actionable insights to improve production monitoring, so printers and converters can achieve new levels of color consistency with fewer defects and greater assurance of curing.

Other highlights in Baldwin’s booth include the Corona Slim treatment system, which ensures the exact dyne levels needed for perfect uniformity in application, and the Guardian PQV 100% Print Inspection, which provides complete print quality verification from prepress through production, reporting and archiving.

Source:

Barry-Wehmiller

28.03.2022

Startups and AkzoNobel sign letters of intent for joint collaboration

Less than 24 hours after winning Paint the Future awards, three startups have already signed their letters of intent to continue working together on sustainable business opportunities with AkzoNobel.

It’s the next step of a continuing collaborative innovation journey. The startups had the opportunity to explore their solutions with their mentors and industry experts through each phase of the global startup challenge, including an intense three-day bootcamp. Now having signed the letters of intent, they will develop their solutions even further with AkzoNobel.

“The winning startups are joining our go-to-market acceleration program, connecting them to a global network of people and resources,” says Menno van der Zalm, Director of the AkzoNobel Incubator. “Over the next six months, we’ll work together to validate their solutions for our customers and develop a joint value case.”

The following three solutions won over the international jury of experts and business leaders:

Less than 24 hours after winning Paint the Future awards, three startups have already signed their letters of intent to continue working together on sustainable business opportunities with AkzoNobel.

It’s the next step of a continuing collaborative innovation journey. The startups had the opportunity to explore their solutions with their mentors and industry experts through each phase of the global startup challenge, including an intense three-day bootcamp. Now having signed the letters of intent, they will develop their solutions even further with AkzoNobel.

“The winning startups are joining our go-to-market acceleration program, connecting them to a global network of people and resources,” says Menno van der Zalm, Director of the AkzoNobel Incubator. “Over the next six months, we’ll work together to validate their solutions for our customers and develop a joint value case.”

The following three solutions won over the international jury of experts and business leaders:

  • Winner: SolCold
    The solution from Israeli startup SolCold is a sustainable self-cooling coating based on anti-Stokes. It uses the sun’s energy to keep the inside temperature much cooler without having to use any electricity.
  • Winner: Aerones
    Latvian startup Aerones brings a robotic solution to wind turbine maintenance. Their crawling robot allows technicians to safely and efficiently perform inspections, cleaning and repairs at height.
  • Winner: SprayVision
    From the Czech Republic, SprayVision brings a data-driven approach to optimizing spray application of paint, offering customers full control over the process. The solution helps to reduce environmental impact by saving material and improving quality.
Source:

AkzoNobel

(c) OETI
16.03.2022

OETI: Opening of sales offices in India and Bangladesh

OETI - Institute for Ecology, Technology and Innovation’ offers as a worldwide accredited and notified centre of excellence testing and certification services. The company specialises in textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality.  As a founding member of the OEKO-TEX® community (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

OETI - Institute for Ecology, Technology and Innovation’ offers as a worldwide accredited and notified centre of excellence testing and certification services. The company specialises in textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality.  As a founding member of the OEKO-TEX® community (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company TESTEX AG, OETI’s network of locations spans several continents. Recently, two more branches have been added in India and Bangladesh: Headquartered in Coimbatore/Tamil Nadu, OETI India is managed by Vignesh Amalraj, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management. The second location was recently opened in Dhaka, Bangladesh. The responsible Country Manager, Mohiuddin Sheek, is an expert in the areas of testing, auditing, certification, product safety, training, consulting and business development.

More information:
OETI
Source:

OETI

13.03.2022

Baldwin to showcase key innovations at ICE Europe in Munich

Baldwin Technology Company Inc.—a one-stop source for high-performance coating, curing, treating, cleaning and inspection solutions—will feature pioneering new technology for optimizing converting, printing and film-extrusion processes at ICE Europe, which will be held at the Munich Trade Fair Centre in Germany from March 15 to 17.

Baldwin’s innovations can help customers meet the burgeoning demand for film and packaging amid the many economic and logistical headwinds challenging the industry. In addition, Michael Stürmer, Baldwin’s Director of Strategic Accounts, will present “Back to the Future: The 100-year-old processautomation solutions the corrugated industry has overlooked, until now!” at 11:30 a.m. March 17 during the International Exhibition for the Corrugated and Folding Carton Industry, held in the same location as ICE.

Baldwin Technology Company Inc.—a one-stop source for high-performance coating, curing, treating, cleaning and inspection solutions—will feature pioneering new technology for optimizing converting, printing and film-extrusion processes at ICE Europe, which will be held at the Munich Trade Fair Centre in Germany from March 15 to 17.

Baldwin’s innovations can help customers meet the burgeoning demand for film and packaging amid the many economic and logistical headwinds challenging the industry. In addition, Michael Stürmer, Baldwin’s Director of Strategic Accounts, will present “Back to the Future: The 100-year-old processautomation solutions the corrugated industry has overlooked, until now!” at 11:30 a.m. March 17 during the International Exhibition for the Corrugated and Folding Carton Industry, held in the same location as ICE.

Baldwin provides converters with expertise and a broad range of market-leading innovations that offer superior print results, and enhance the economic and environmental efficiency of print production processes. Solutions on display at ICE will include automated cylinder cleaning systems, corona surface pretreatment systems, LED-UV curing and IR-drying systems, hot-air dryers, rotary spray systems, and technologies for color management and defect detection, all of which increase productivity, reduce waste, improve working conditions and provide full control of producing flawless products.

Source:

Barry-Wehmiller for Baldwin

21.02.2022

EFI’s VUTEk Q5r Printer and Fiery Software earn EDP Awards

Electronics For Imaging, Inc. has received two European Digital Press (EDP) Awards from the European graphics arts trade press, a prestigious technical awards programme that recognises innovative advancements in digital print production. The EFI™ VUTEk® Q5r roll-to-roll UV LED printer beat competition in the large/wide- format printing systems category for printers above 350-centimetres wide. EDP judges honoured EFI Fiery® software integration with finishers as the top solution in the awards programme’s category for software automation tools.

Electronics For Imaging, Inc. has received two European Digital Press (EDP) Awards from the European graphics arts trade press, a prestigious technical awards programme that recognises innovative advancements in digital print production. The EFI™ VUTEk® Q5r roll-to-roll UV LED printer beat competition in the large/wide- format printing systems category for printers above 350-centimetres wide. EDP judges honoured EFI Fiery® software integration with finishers as the top solution in the awards programme’s category for software automation tools.

Automation, quality and value with award-winning roll-to-roll technology
The EFI VUTEk Q5r printer is a roll-to-roll display graphics printer, capable of running at speeds of up to 672 square metres per hour. The 5.2-metre-wide printer delivers a full system solution from file submission to a finished print with options such as in-line quality inspection, in-line slitting and cutting, roll and tape collection, auto-calibration, automated backlit printing, automated blockout printing and much more.
 
EFI VUTEk Q series printers, which include both the Q5r and a 3.5-metre wide VUTEk Q3r model, are available with up to nine colours including white and clear, and feature EFI UltraDrop™ Technology with native 7-picolitre printheads and multi-drop addressability for high-definition quality. Benefits include smoothness in shadows, gradients, and transitions, as well as precise and sharp 3-point size text with a true resolution of up to 1,200 dots per inch.

Fast, flawless finishing
EFI Fiery software integration with finishers, the winner in the EDP Awards category for best software automation tool, offers advanced integration with in-line or offline slitter/cutter/creasers. Operators can define cut, crease, and perforation locations on the job content in the Fiery software solution, which then communicates the configuration to finishing equipment, eliminating operator touchpoints and errors from incompatible layouts.

EFI Fiery software integration with finishers is offered in two different EFI Fiery software products: Fiery Impose and Fiery Finishing Designer.