From the Sector

Reset
28 results
28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

Photo: Hyve Group
08.09.2023

Source Home & Gift: Successful conclusion

Source Home & Gift came to a successful conclusion after four days of innovation, networking, and collaboration. The global showcase provided a hub for manufacturers, designers, buyers, and distributors to engage in meaningful conversations, explore emerging trends, establish invaluable business connections, and foster global trade relationships.

From the 3rd - 6th September, the second edition of Source Home & Gift which has tripled in size since its inaugural show in February, brought together brands and retailers including Oh Deer, Sainsburys, Dunelm, Haskins Garden Centre, Indico, Blue Diamond, Funky Pigeon, M&M, Matalan, Disney, Morrisons, M&S, Next, Costcutter, AIS, Alzheimers Society, Amazon, B&Q, Card Factory, Ridleys Games, and more.

Source Home & Gift came to a successful conclusion after four days of innovation, networking, and collaboration. The global showcase provided a hub for manufacturers, designers, buyers, and distributors to engage in meaningful conversations, explore emerging trends, establish invaluable business connections, and foster global trade relationships.

From the 3rd - 6th September, the second edition of Source Home & Gift which has tripled in size since its inaugural show in February, brought together brands and retailers including Oh Deer, Sainsburys, Dunelm, Haskins Garden Centre, Indico, Blue Diamond, Funky Pigeon, M&M, Matalan, Disney, Morrisons, M&S, Next, Costcutter, AIS, Alzheimers Society, Amazon, B&Q, Card Factory, Ridleys Games, and more.

Hundreds of accredited manufacturers, producers, and artisans from 14 countries including Bangladesh, China, Germany, Ghana, Hong Kong, India, Nepal, Pakistan, Palestine, Philippines, Sri Lanka, Uganda, UK, Uzbekistan, and the first dedicated Egyptian Pavilion organised by Egypt Expo & Convention Authority (EECA) told their stories and showcased their products and manufacturing capabilities across product categories including homewares, furniture, gifts, stationery and greetings, toys, textiles, household and pet supplies, and packaging.

The next show takes place on the 4th – 7th February 2024.

Source:

Good Results PR

drop of orders (c) ACIMIT
26.07.2023

Italian Textile Machinery: 2nd Q 2023 Drop in Order Intake

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

ACIMIT president Marco Salvadè stated that, “The orders index for the second quarter elaborated by our Economics Department clearly shows a decline in new orders both in Italy and abroad compared to the previous year. The decline that usually precedes an event such as ITMA, the international textile machinery exhibition held last June in Milan, however, is part of a negative trend that has been going on for several quarters”.

Uncertainty appears to be weighing heavily especially on markets abroad, where foreign trade statistics updated to the first quarter of 2023 are marked by a slackening in Italian sales in some important reference markets, such as Turkey, China, the United States and Pakistan.

Salvadè added that, “Feedback from over 400 Italian companies that took part in ITMA is positive. It’s now necessary for the many contacts made during the event to materialize and for the demand for machinery in the main textile machinery markets to resume a path towards growth.”

More information:
ACIMIT orders index
Source:

ACIMIT

Monforts: Solid Success at ITMA 2023 Photo: Monforts / AWOL Media
07.07.2023

Monforts: Solid Success at ITMA 2023

Finishing machinery specialist Monforts has secured a number of major orders from textile manufacturers in Central and South America recently, and was pleased to welcome a high number of visitors from the region to its stand at ITMA 2023 in Milan from June 8-14.

Among new orders are those for three Montex stenters delivered to the AustralTex Group in Argentina and a further Montex range to denim manufacturer CIT in Brazil. Guatemala’s Global Textiles placed an order for its second Montex stenter, while Mexico’s Zentrix ordered its third and Avante, also in Mexico, has opted for its sixth.

Elsewhere, orders have also been placed for the delivery of three new Montex stenters to one of Pakistan’s major corporations, as well as a new Thermex dyeing range to nonwovens manaufacturer Orsa in Italy. Further orders – both for new machines and retrofit modules – are now anticipated following ITMA 2023, which attracted over 111,000 visitors to Milan.

Finishing machinery specialist Monforts has secured a number of major orders from textile manufacturers in Central and South America recently, and was pleased to welcome a high number of visitors from the region to its stand at ITMA 2023 in Milan from June 8-14.

Among new orders are those for three Montex stenters delivered to the AustralTex Group in Argentina and a further Montex range to denim manufacturer CIT in Brazil. Guatemala’s Global Textiles placed an order for its second Montex stenter, while Mexico’s Zentrix ordered its third and Avante, also in Mexico, has opted for its sixth.

Elsewhere, orders have also been placed for the delivery of three new Montex stenters to one of Pakistan’s major corporations, as well as a new Thermex dyeing range to nonwovens manaufacturer Orsa in Italy. Further orders – both for new machines and retrofit modules – are now anticipated following ITMA 2023, which attracted over 111,000 visitors to Milan.

“Visitor footfall at ITMA 2023 was well beyond the company’s expectations, and we were especially pleased at the constant number of visitors from South American companies, as well as from Asia and Europe,” said Monforts Marketing Manager Nicole Croonenbroek. “We were able to provide them with detailed information about our portfolio of machines and technologies digitally and fielded an unprecedented number of serious enquiries, many of which promise to turn into new business.”

Monforts Montex stenters for processes such as drying, stretching, heat-setting and coating, she added, are already the industry standard for the fabric finishing industry, providing a number of advantages in terms of production throughput and especially in energy efficiency and resource savings. Other key technologies in the Monforts portfolio include relaxation dryers, Thermex dyeing ranges and Monfortex compressive shrinking ranges.

Montex®Coat
“We were also very pleased with the interest in the Montex®Coat, the latest addition to our range of technologies, which we displayed in Milan,” Croonenbroek said.

The Montex®Coat can serve a very diverse number of markets and enables full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments, as well as solvent coatings. Knife coating, roller coating or screen printing can also all be accommodated with this system. It provides the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

Many refinements have been made to the Montex®Coat in the past few years, resulting in higher coating accuracy and the resulting quality of the treated fabrics. A number of advanced new improvements were introduced in Milan, including automatic edge limiters for immediately adapting to new coating widths and a new and simplified hand-held control device. These save considerable time in setting up the machine and ensuring consistent production.

The Montex®Coat unit displayed in Milan was sold to Vietnamese company Thai Tuan during the show.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

(c) Source Fashion by Hyve
21.04.2023

Source Fashion returns July 2023

Source Fashion returns to London Olympia on 16-18th July, more than doubling in size and welcoming over 300 exhibitors from around the world.

Source Fashion offers a platform for decision-makers in buying, sourcing and procurement, with the reassurance of knowing that every exhibitor has been audited to ensure sustainability and transparency remains at the heart of their business model. The February launch show welcomed over 130 manufacturers from 20 countries including the UK, Peru, Cambodia, Pakistan, Turkey, China, India, Portugal, Hong Kong, Italy, and Greece, attracting nearly 5,000 visitors from leading retailers and brands including John Lewis, M&S, Sainsbury’s, Tesco, All Saints, Asos, Ted Baker, Bella Freud, FILA, Fred Perry, Matalan, Monsoon, Stitch Fix, Urban Outfitters, Very Group, and many more.

Source Fashion returns to London Olympia on 16-18th July, more than doubling in size and welcoming over 300 exhibitors from around the world.

Source Fashion offers a platform for decision-makers in buying, sourcing and procurement, with the reassurance of knowing that every exhibitor has been audited to ensure sustainability and transparency remains at the heart of their business model. The February launch show welcomed over 130 manufacturers from 20 countries including the UK, Peru, Cambodia, Pakistan, Turkey, China, India, Portugal, Hong Kong, Italy, and Greece, attracting nearly 5,000 visitors from leading retailers and brands including John Lewis, M&S, Sainsbury’s, Tesco, All Saints, Asos, Ted Baker, Bella Freud, FILA, Fred Perry, Matalan, Monsoon, Stitch Fix, Urban Outfitters, Very Group, and many more.

Suzanne Ellingham, Director of Sourcing of Source Fashion; “We couldn't have asked for a better first show. Leading retailers attended keen to source new, and crucially audited, producers and manufacturers. We champion responsibility, and sustainability isn’t just an addition to our show, it is our core value. We unite manufacturers practicing environmental, transparent, and fair-trade methods, with buyers looking to source sustainably.

“Our next show will be even bigger and better – we have already doubled the size of our floorplan for July and have been overwhelmed by the interest from both exhibitors and visitors. The global sustainability market is expected to grow by 24% annually in the next seven years according to Meta, which means now more than ever, brands are on the hunt for new sustainable manufacturers and suppliers to source from and the growth rate is staggering for Source Fashion. It is going to be firmly established as a significant platform for responsible sourcing by its second show.”

Source:

Source Fashion by Hyve / Good Results

13.01.2023

Source Fashion: New international fashion sourcing platform in UK

The international fashion sourcing platform Source Fashion, taking place from 12th – 14th February at Olympia London, has announced a compelling line-up of country pavilions and over 150 audited, quality manufacturers from around the world including Peru, India, China, Pakistan, Italy, Spain, Greece, North Macedonia,  the UAE, Madagascar, Jordan, Uzbekistan, Turkey, the UK and many more who will join the inaugural show, which runs parallel to Pure London.

Bringing a textile pavilion to the UK for the first time, the Peru Pavilion will showcase six manufacturers specialising in high-quality alpaca wool from the raw material right through to garment production, as well as cotton and other natural mixtures.

The international fashion sourcing platform Source Fashion, taking place from 12th – 14th February at Olympia London, has announced a compelling line-up of country pavilions and over 150 audited, quality manufacturers from around the world including Peru, India, China, Pakistan, Italy, Spain, Greece, North Macedonia,  the UAE, Madagascar, Jordan, Uzbekistan, Turkey, the UK and many more who will join the inaugural show, which runs parallel to Pure London.

Bringing a textile pavilion to the UK for the first time, the Peru Pavilion will showcase six manufacturers specialising in high-quality alpaca wool from the raw material right through to garment production, as well as cotton and other natural mixtures.

The main Indian Pavilion at this year’s Source Fashion, in collaboration with the Wool and Woollens Export Promotion Council, will showcase 20 established garment and textile exporters specialising in wool, woollen and acrylic fibres. The exhibitors will be showing full garments including men’s, women’s and kidswear as well as a selection of fabrics and raw materials. These exhibitors are regular export partners to the UK retail industry and already work with some big retailers in white label production.

The China Pavilion will present a selection of high-quality Chinese manufacturers ranging from full garment manufacturing through to raw materials, fabrics, cashmere and components.

Other producers and manufacturers attending Source Fashion from across Europe and the UK include:

  • Mivania - an Italian knitwear manufacturer producing garments in 100% cashmere and cashmere blends.
  • SATCoL (Salvation Army Trading Company) - a charity-owned textiles collector in the UK, actively working with retailers to reduce their carbon footprints.
  • Kusilas - a Spanish company monitoring all the stages of the production process.
  • Prime Casual - based in Leicester, UK, they specialise in the design and manufacture of ladies clothing from fast fashion, wholesale to bespoke tailoring.
  • Athos Pallas - a fashion and textile agency located in Thessaloniki, Greece.

 

Source:

Source Fashion by Hyve / Good Results PR

20.12.2022

JIAM 2022 OSAKA concludes successfully

Japan International Apparel Machinery & Textile Industry Trade Show (JIAM) has wrapped up four successful days of business at INTEX OSAKA. From 30 November – 3 December 2022, a total of 10,452 visitors found their way to the fairground. 150 exhibitors from 11 different countries and regions welcomed visitors with an extensive and diverse selection of products. Buyers from Bangladesh, India, Sri Lanka, South Korea, and Pakistan constituted the top five visiting countries (excluding Japan), compensating for a drop in visitors from China this year due to COVID-19 travel restrictions.

Japan International Apparel Machinery & Textile Industry Trade Show (JIAM) has wrapped up four successful days of business at INTEX OSAKA. From 30 November – 3 December 2022, a total of 10,452 visitors found their way to the fairground. 150 exhibitors from 11 different countries and regions welcomed visitors with an extensive and diverse selection of products. Buyers from Bangladesh, India, Sri Lanka, South Korea, and Pakistan constituted the top five visiting countries (excluding Japan), compensating for a drop in visitors from China this year due to COVID-19 travel restrictions.

Under the theme of "It all connects at JIAM – the forefront of technology and master craftsmanship", the 2022 edition showcased apparel manufacturing solutions catered to each and every need, combining skillsets and knowledge with modern technology. At the opening ceremony, Mr Shinsuke Uchinashi, Chairman of the Japan Sewing Machinery Manufacturers Association (JASMA), commented, "In the new normal, there is growing demand for new technological advancements, productivity improvements, and greater quality control. In addition to solving these pain points, this edition’s exhibitors are also showcasing various innovations in response to automation, IoT, and networking."

A wide variety of special seminars held in Hall 4 were well received. Highlights included a skills training seminar hosted by an emeritus professor and panel discussions by leading companies in the manufacturing industry. SDGs, examples of IoT in industrial sewing machines, and upcycling initiatives were also on the agenda, with visitors gathered around the presented items taking notes.
 
The Home Sewing Zone led by three machine manufactures and JASMA held daily workshops where visitors could learn about upcycling using scraps, and take a break at the café with "cup sleeves" of their own making. Ms Kazuko Mizuochi of JASMA said, "We had a great attendance from the very first day. We were able to familiarize participants with sewing machines and also promote upcycling activities."

The next edition will take place from 27 – 30 November 2024 at INTEX OSAKA.

Source:

Messe Frankfurt Japan Ltd

02.12.2022

Baldwin presents sustainable TexCoat G4 Finishing System at Igatex Pakistan

Baldwin Technology Company Inc. announced that Igatex Pakistan will officially kick off its new partnership with long-established Pakistan textile technology agent Al Ameen Trading Corporation. Representatives from both companies will team up to demonstrate Baldwin’s highly sustainable TexCoat™ G4 finishing system.

Igatex, the International Exhibition for Garment, Textile Machinery and Accessories, takes place December 1-4 at the Expo Centre in Lahore. Baldwin and Al Ameen will demonstrate TexCoat G4 and provide details on Baldwin’s Plasma Pure corona treatment as well as TexMoister G2™ remoistening systems technologies.

Baldwin Technology Company Inc. announced that Igatex Pakistan will officially kick off its new partnership with long-established Pakistan textile technology agent Al Ameen Trading Corporation. Representatives from both companies will team up to demonstrate Baldwin’s highly sustainable TexCoat™ G4 finishing system.

Igatex, the International Exhibition for Garment, Textile Machinery and Accessories, takes place December 1-4 at the Expo Centre in Lahore. Baldwin and Al Ameen will demonstrate TexCoat G4 and provide details on Baldwin’s Plasma Pure corona treatment as well as TexMoister G2™ remoistening systems technologies.

Baldwin’s TexCoat G4 non-contact precision-spray technology helps textile finishers up their game by enabling consistent, high-quality finishing, with zero chemistry waste and drastically minimized water and energy consumption. With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.

Source:

Baldwin Technology Company Inc.

18.11.2022

Monforts at Igatex 2022

Monforts will be presenting its finishing technologies at the forthcoming Igatex textile machinery exhibition, which takes place from December 1-4 at the Lahore Expo Centre in Pakistan.

The importance of the textile industry to Pakistan’s economy cannot be overstated – it accounts for 60% of the country’s overall exports and some of its industry’s players are very major employers. In the year to June 2022, Pakistan’s textile exports climbed by 25% to a record value of $19.3 billion according to the country’s Bureau of Statistics, as security of deliveries – especially to Europe and the USA – worked in the country’s favour, in the light of the Covid-19 pandemic and subsequent supply chain issues. It has a key role to play in quickly getting the country back on its feet after the devastation.

Monforts will be presenting its finishing technologies at the forthcoming Igatex textile machinery exhibition, which takes place from December 1-4 at the Lahore Expo Centre in Pakistan.

The importance of the textile industry to Pakistan’s economy cannot be overstated – it accounts for 60% of the country’s overall exports and some of its industry’s players are very major employers. In the year to June 2022, Pakistan’s textile exports climbed by 25% to a record value of $19.3 billion according to the country’s Bureau of Statistics, as security of deliveries – especially to Europe and the USA – worked in the country’s favour, in the light of the Covid-19 pandemic and subsequent supply chain issues. It has a key role to play in quickly getting the country back on its feet after the devastation.

Monforts customers in the regions around the country’s three biggest cities of Karachi, Lahore and Faisalbad include all of the main players in the fields of home textiles and denim production, including Afroze, , Al Karam Artistic Milliners, Azgard-9, Crestex, , Gul Ahmed, Interloop, Liberty Mills, Lucky Textile Mills, Mustaqim, Naveena (NDL), Rajby Industries, Sapphire Finishing, Soorty, Style Textile and US Denim.

These companies rely on established Monforts technologies including Montex stentering equipment, Monfortex sanforizing units and Thermex dyeing ranges. The company’s Matex Eco Applicator minimum application system has also proved a big hit in recent years.

Monforts has also achieved considerable success in Pakistan with its Econtrol®* dyeing system  – an effective and established dyeing process. More than 40 Thermex continuous dyeing ranges have been installed in Pakistan in recent years and operator training on the Econtrol®* process by sophisticated technologists is an additional service.

The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step. Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

An immediate wash off is also unnecessary, allowing for flexible production planning. The process is suitable for pale to dark shades with very good fastness properties. Also waste water treatment is improved by this technology.

*Econtrol is a registered mark of Dystar Colours Distribution GmbH.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

13.06.2022

ITM 2022: Bringing Textile Technology Leaders Together

ITM 2022, the first major international textile machinery exhibition to be held in the world after a 3-year hiatus during the pandemic process, is getting ready to open its doors. Bringing the leading brands of textile technologies together in Istanbul, ITM 2022 will host world launches and numerous collaborations for 5 days.

ITM 2022- International Textile Machinery Exhibition, organized in partnership with Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc, will open its doors at Tüyap Fair and Congress Center between 14-18 June. For ITM 2022, which will be held in 12 halls on an area of 120,000 m2; hums of 1280 participating companies from more than 40 countries continues. Tüyap Fairground, where thousands of people sweat for stand setups, is getting ready for the big meeting. ITM 2022, where all halls have reached 100% occupancy rate and 1280 exhibitor companies are located, will also attract attention with the stand areas and machine parks that the manufacturers have enlarged compared to the previous exhibitions.

ITM 2022, the first major international textile machinery exhibition to be held in the world after a 3-year hiatus during the pandemic process, is getting ready to open its doors. Bringing the leading brands of textile technologies together in Istanbul, ITM 2022 will host world launches and numerous collaborations for 5 days.

ITM 2022- International Textile Machinery Exhibition, organized in partnership with Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc, will open its doors at Tüyap Fair and Congress Center between 14-18 June. For ITM 2022, which will be held in 12 halls on an area of 120,000 m2; hums of 1280 participating companies from more than 40 countries continues. Tüyap Fairground, where thousands of people sweat for stand setups, is getting ready for the big meeting. ITM 2022, where all halls have reached 100% occupancy rate and 1280 exhibitor companies are located, will also attract attention with the stand areas and machine parks that the manufacturers have enlarged compared to the previous exhibitions.

Companies will showcase their state-of-the-art technologies for the first time at ITM 2022
Many companies that focus on product development and new productions under pandemic conditions will have the opportunity to introduce their products to their customers for the first time in 3 years at the ITM 2022 Exhibition. Company owners, managers, employees and sector representatives visiting the exhibition will have the opportunity to see the latest technological innovations for the first time and witness their world launches.

Sector representatives, who will open up new horizons in their minds about textile technologies, will sign new products by transforming the extraordinary and original ideas that they have obtained at the ITM 2022 Exhibition into design. Participating companies will also update their machines in line with the demands and needs from the sector representatives and lead the development of new technologies.

Significant Contribution to Exports Aimed with Machine Sales and New Investment Decisions
The textile industry, which is among the locomotive sectors in Turkey's exports, has made a significant contribution to the Turkish economy, especially with the performance increase it has achieved during the pandemic period. Having achieved an increase of up to 40 percent in its exports of textiles and raw materials, Turkey also managed to increase its exports of medical textiles, technical textiles and home textiles. The industry will further increase this success with the collaborations to be realized at ITM 2022. The textile machinery industry will gain great momentum with the machinery sales and new investment decisions to be made at the exhibition.

ITM 2022, which will be attended by many domestic and foreign companies and visited by thousands of people, will be an organization where both domestic and foreign companies will make sales amounting to millions of Euros and many business connections will be realized.

Intense Interest from Trade Delegations
Trade delegations from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations. The intense application of visitors to consulates and commercial attachés from all over the world clearly reveals that ITM 2020 will host a large number of visitors.

ITM 2022 Exhibition Prepares to Break Both Exhibitor and Visitor Records
Company owners, company representatives and visitors left the 2018 edition of the ITM Exhibition very satisfied. ITM 2018 Exhibition, attended by 1150 companies and company representatives from 64 countries and visited by approximately 60 thousand people from 94 countries made a significant contribution to the export records of the textile industry that year. At the ITM 2022; It is getting ready to break new records with the number of participants and visitors coming from Turkey and abroad.

Technical Textiles and Nonwovens Industry Will Meet at HIGHTEX 2022 Exhibition
On the other hand, HIGHTEX 2022 Exhibition, which will be held simultaneously with the ITM 2022 Exhibition, will be an exhibition where Nonwoven products, raw materials used in their production and the state-of-the-art technologies will be exhibited. HIGHTEX 2022 Exhibition, which is the first and only in its field in Turkey, will host a record number of participants and visitors in parallel with the increase in demand for technical textiles. At the HIGHTEX 2022 Exhibition, companies operating in many sectors, from medical textiles to hygienic textiles, from agricultural textiles to geotextiles, will exhibit their latest products and production technologies. Nonwoven manufacturers will come together with the global players of the sector and have the opportunity to both invest in technology and introduce their newest products.

More information:
ITM
Source:

ITM

(c) ITM, Teknik Fairs INC
06.05.2022

The countdown for ITM 2022 has begun

Organized by the partnership of Tüyap Fairs and Exhibitions Organization Inc. and Teknik Fairs Inc., the ITM 2022 International Textile Machinery Exhibition will be held at Istanbul Tüyap Fair and Congress Center on 14-18 June 2022. Hundreds of domestic and international exhibitors are looking forward to presenting their newest technologies for the first time at the ITM 2O22 Exhibition. Leading textile machinery manufacturers, global sector investors, and professional visitors are planning to come to the ITM 2022 Exhibition to examine the latest technologies closely.

Trade committees from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations.

Organized by the partnership of Tüyap Fairs and Exhibitions Organization Inc. and Teknik Fairs Inc., the ITM 2022 International Textile Machinery Exhibition will be held at Istanbul Tüyap Fair and Congress Center on 14-18 June 2022. Hundreds of domestic and international exhibitors are looking forward to presenting their newest technologies for the first time at the ITM 2O22 Exhibition. Leading textile machinery manufacturers, global sector investors, and professional visitors are planning to come to the ITM 2022 Exhibition to examine the latest technologies closely.

Trade committees from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations.

The ITM 2022 Exhibition is of great importance for Turkish textile machinery and accessories manufacturers to increase their competitiveness in exports and to sign collaborations that will result in worldwide exports. Leading textile technology brands, which focus on product development and new productions during the pandemic conditions, are looking forward to the ITM 2022 Exhibition to present their products to the market and introduce them to their customers face to face. More than 300 manufacturers will make the world launches of their latest technological innovations at the ITM 2022 Exhibition.

Source:

ITM, Teknik Fairs INC

(c) Bangladesh Apparel Exchange (BAE)
25.04.2022

The Sustainable Apparel Forum brings together government representatives and industry leaders

The Sustainable Apparel Forum takes place on 10 May 2022 in Dhaka, Bangladesh, bringing together government ministers and advisors, the European Union, UN bodies, brands, global fashion campaigners, brands, manufacturers and industry leaders.

This year’s SAF, the third such event, aims to establish Bangladesh as one of the world’s most responsible apparel sourcing destinations. That’s why senior government representatives will be speaking and in attendance, listening to the needs of industry and what needs to be done to take Bangladesh garment production to the next level.

Senior representatives from globally renowned recycling and renewable energy companies will also be in attendance as well as exhibit their sustainability and green technologies, products and solutions under the same roof.

The SAF will showcase opportunities for much-needed green financing in the industry.
Issues under the spotlight will include climate action, environmental social & governance (ESG) and green finance, purchasing practices, circular economy, and regulatory reforms.

The Sustainable Apparel Forum takes place on 10 May 2022 in Dhaka, Bangladesh, bringing together government ministers and advisors, the European Union, UN bodies, brands, global fashion campaigners, brands, manufacturers and industry leaders.

This year’s SAF, the third such event, aims to establish Bangladesh as one of the world’s most responsible apparel sourcing destinations. That’s why senior government representatives will be speaking and in attendance, listening to the needs of industry and what needs to be done to take Bangladesh garment production to the next level.

Senior representatives from globally renowned recycling and renewable energy companies will also be in attendance as well as exhibit their sustainability and green technologies, products and solutions under the same roof.

The SAF will showcase opportunities for much-needed green financing in the industry.
Issues under the spotlight will include climate action, environmental social & governance (ESG) and green finance, purchasing practices, circular economy, and regulatory reforms.

Speakers of the SAF include Dr Tawfiq-e-elahi Chowdhury, Bir Bikrom, adviser to the Prime Minister of Bangladesh on power, energy and mineral resources; Salman F Rahman, MP, adviser to the Prime Minister of Bangladesh on private industry & investment; Tipu Munshi, MP, commerce minister of Bangladesh; Begum Monnujan Sufian, MP, state minister for labor and employment of Bangladesh; Saber Hossain Chowdhury, MP, chairman of parliamentary standing committee on ministry of environment, forest and climate change of Bangladesh;  Anna Athanasopoulou, head of unit for social economy & creative industries European Commission;  Barbara Bijelic, financial sector and regulatory engagement lead centre for responsible business conduct, OECD;  Lindita Xhaferi-Salihu, sectors engagement lead, UNFCCC; Gagan Bansal, global material innovation & strategy manager, H&M; Javier Santonja Olcina,  regional head, Bangladesh & Pakistan, Inditex; Faruque Hassan, president, Bangladesh Garment Manufacturers & Exporters Association (BGMEA); Dr Mark Anner, founding director, Center for Global Workers’ Rights and also professor, Penn State University, USA; Ayesha Barenblat, founder and CEO, Remake;  Najet Draper, vice president research, Better Buying; and  Tuomo Poutiainen,  country director, Bangladesh, ILO.

Source:

Bangladesh Apparel Exchange (BAE)

Azgard 9’s innovative fabric absorbs carbon dioxide while simultaneously producing oxygen. (c) Azgard 9
23.07.2021

Monforts customers at Première Vision Digital Denim Week

Denim manufacturers employing Monforts technologies showcased their latest activities, including sustainable fabric manufacturing, new advances in fibres, dyes and chemicals, as well as process and supply improvements and recycling options, at Première Vision’s Digital Denim Week, held from July 5-9.

The users of Monforts equipment included AGI Denim (Pakistan), Azgard 9 (Pakistan), Berto (Italy), Bossa (Turkey), DNM (Turkey), Kilim (Turkey) and Orta (Turkey).

The new Naveena Denim Mills (Pakistan) Holistic collection, for example, employs a suite of sustainable materials such as organic cotton and post-consumer and post-industrial waste cotton that has been shredded and recycled at its in-house unit in Pakistan.

Supply chain transparency is also becoming increasingly important, and Turkey’s Bossa is now sharing information on its dyes, energy sources and recycled content use with its customers. For organic cotton in particular, Bossa provides QR codes with which brands can identify the names of individual farms and their locations, as well as details such as the origins of specific seeds and the use of irrigation by growers.

Denim manufacturers employing Monforts technologies showcased their latest activities, including sustainable fabric manufacturing, new advances in fibres, dyes and chemicals, as well as process and supply improvements and recycling options, at Première Vision’s Digital Denim Week, held from July 5-9.

The users of Monforts equipment included AGI Denim (Pakistan), Azgard 9 (Pakistan), Berto (Italy), Bossa (Turkey), DNM (Turkey), Kilim (Turkey) and Orta (Turkey).

The new Naveena Denim Mills (Pakistan) Holistic collection, for example, employs a suite of sustainable materials such as organic cotton and post-consumer and post-industrial waste cotton that has been shredded and recycled at its in-house unit in Pakistan.

Supply chain transparency is also becoming increasingly important, and Turkey’s Bossa is now sharing information on its dyes, energy sources and recycled content use with its customers. For organic cotton in particular, Bossa provides QR codes with which brands can identify the names of individual farms and their locations, as well as details such as the origins of specific seeds and the use of irrigation by growers.

Turkey’s Orta’s new Denim Route – inspired by the historical Silk Road for trade between the East and West – is an interactive supplier map detailing the regions from which it sources cotton, dyestuff, chemicals and various fibres to complement its other transparency initiatives.

Meanwhile, a living and breathing piece of clothing that absorbs carbon dioxide while simultaneously producing oxygen was introduced at Digital Denim Week 2021 by Azgard 9 (Pakistan) .

22.01.2021

Intertextile Shanghai Home Textiles to return in August 2021

From 25 – 27 August, 2021, Intertextile Shanghai Home Textiles – Autumn Edition will join forces with Intertextile Shanghai Apparel Fabrics – Autumn Edition, Yarn Expo Autumn, PH Value and CHIC to showcase the latest products and services within the entire textile sector. Collectively, the fairs are set to offer valuable synergistic effects for the home décor, apparel, yarn and fibre industries.

Despite the disruption caused by the pandemic, the Autumn Edition of Intertextile Shanghai Home Textiles 2020 was able to go ahead as scheduled to support the industry’s recovery. The three-day show welcomed a total of 26,673 trade buyers from 43 countries & regions, as well as 643 exhibitors from 11 countries & regions. What’s more, the show’s virtual events drew 558,179 attendees from across the world.

From 25 – 27 August, 2021, Intertextile Shanghai Home Textiles – Autumn Edition will join forces with Intertextile Shanghai Apparel Fabrics – Autumn Edition, Yarn Expo Autumn, PH Value and CHIC to showcase the latest products and services within the entire textile sector. Collectively, the fairs are set to offer valuable synergistic effects for the home décor, apparel, yarn and fibre industries.

Despite the disruption caused by the pandemic, the Autumn Edition of Intertextile Shanghai Home Textiles 2020 was able to go ahead as scheduled to support the industry’s recovery. The three-day show welcomed a total of 26,673 trade buyers from 43 countries & regions, as well as 643 exhibitors from 11 countries & regions. What’s more, the show’s virtual events drew 558,179 attendees from across the world.

“We are delighted that Intertextile 2020 was able to run as planned and received positive feedback from participants. It is a confirmation of our leading position in the Asian industry, and our unwavering commitment to providing the best trade platform for our exhibitors and visitors that reflects market demands,” said Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd. “As we continue to navigate through these challenging times, we look forward to developing more creative and flexible solutions to adapt to the ever-changing business environment. The 2021 edition will continue with the hybrid format that combines both physical and virtual events, in order to facilitate contacts between suppliers and buyers worldwide, and open up new opportunities in the post-pandemic era.”
 
“Additionally, we decided to hold Intertextile Shanghai Home Textiles concurrently with Intertextile Shanghai Apparel Fabrics and Yarn Expo next year. Holding these three events at the same time and place will generate exciting synergistic effects, as well as provide a comprehensive sourcing platform for participants. And, of course, the show will present a series of high-quality fringe events for fairgoers to gain the latest market trends and insights,” Ms Wen added.

Discover a new season of inspiration at Intertextile
At the upcoming fair, exhibitors will fill four halls at the National Exhibition and Convention Center (Shanghai), occupying an area of 100,000 sqm. To offer a more efficient and convenient sourcing experience for buyers, the fair will once again feature an array of product zones and country & region pavilions including:

  • Country & region pavilions: presented by Belgium, India, Pakistan, Taiwan and Turkey.
  • Carpet zone: featuring renowned domestic and international providers of carpets and floor coverings.
  • Editor zone: offering high-quality upholstery fabrics from prominent European manufacturers.
  • Finished product zone: international suppliers will showcase their latest finished goods for a variety of applications.
  • Textile design zone: leading design studios will exhibit their creative ideas and products for all areas of the interior markets.
  • Textile technology zone: presenting cutting-edge textile technologies which can achieve flexibility, efficiency and sustainability.
  • Contract business: leading suppliers will offer a vast portfolio of functional fabrics catering to different interior settings such as hotels, restaurants and public spaces.

 

Source:

Messe Frankfurt (HK) Ltd

Monforts texCoat coating system (c) Monforts / AWOL Media
06.10.2020

Monforts at Innovate Textile & Apparel (ITA) 2020

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

CYD
Denim finishing is meanwhile a field in which Monforts has an undisputed lead and it has been working closely with its many partners in the key denim manufacturing countries of Bangladesh, Brazil, China, India, Mexico Pakistan and Turkey to develop advanced solutions. The latest of these is the CYD yarn dyeing system.
“CYD is based on the proven Econtrol® dyeing system for fabrics*,” explains Monforts Head of Denim Hans Wroblowski. “It integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity. The CYD system has been developed in response to a very strong market demand.”

Pre-shrinking
Monforts has also recently delivered a significant number of its latest Monfortex sanforizing lines to customers around the world.
Sanforizing is vital to final fabric quality, pre-shrinking it by compressing prior to washing, to limit any residual or further shrinkage in a made-up finished garment to less than 1%, for perfect comfort and fit over an extended lifetime.

As with industry-leading Montex stenters, Monfortex lines benefit from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

 

*Econtrol® is a registered mark of DyStar Colours Distribution GmbH, Germany.

Archroma starts production of hand sanitizers to help fight COVID-19. © 2020 Archroma
Archroma starts production of hand sanitizers to help fight COVID-19.
13.07.2020

ARCHROMA Starts Production of Hand Sanitizers to Help Fight COVID-19

As part of its active engagement in the fight against COVID-19, Archroma, a global leader in color and specialty chemicals towards sustainable solutions, started bulk production of a new range of hand sanitizers at its Landhi site in Pakistan in May 2020. The new Kieralon® HS range was developed by the R&D team at the Archroma Center of Excellence in Karachi, in line with the World Health Organization (WHO) recommendations.

Sanitizers are currently in high demand in Pakistan in hospitals, isolation centers, medical institutes and other health care environments, due to the COVID-19 outbreak. The use of sanitizers has also been made mandatory in all factories, offices and public places, driving the demand even higher.

The Kieralon® HS range is being produced in different grades and concentrations to eliminate a broad range of germs, bacteria and viruses, to cater for various healthcare and hygiene requirements. They also include emollients and display non-stick and quick drying effect, for skin comfort.

As part of its active engagement in the fight against COVID-19, Archroma, a global leader in color and specialty chemicals towards sustainable solutions, started bulk production of a new range of hand sanitizers at its Landhi site in Pakistan in May 2020. The new Kieralon® HS range was developed by the R&D team at the Archroma Center of Excellence in Karachi, in line with the World Health Organization (WHO) recommendations.

Sanitizers are currently in high demand in Pakistan in hospitals, isolation centers, medical institutes and other health care environments, due to the COVID-19 outbreak. The use of sanitizers has also been made mandatory in all factories, offices and public places, driving the demand even higher.

The Kieralon® HS range is being produced in different grades and concentrations to eliminate a broad range of germs, bacteria and viruses, to cater for various healthcare and hygiene requirements. They also include emollients and display non-stick and quick drying effect, for skin comfort.

In April 2020, Archroma announced the introduction in Brazil of Mowiplus® HPC 9600, a new thickener for sanitizing gels, developed to address the global shortage in the thickener traditionally used for sanitizing gels.

Archroma is also actively supporting manufacturers in the production of face masks and medical protective equipment. Its antimicrobial and barrier products in particular are in high demand, and Archroma is making every effort to assist existing and new customers entering this sector by providing technical know-how and support.

The company is supporting producers of packaging & paper who are facing high demand for food packaging as many restaurants have switched to delivery or take-away, as well as for parcels and boxes supporting online shopping.

Mujtaba Rahim, CEO of Archroma Pakistan comments, “Within Archroma we are cognizant of the acute community need for high quality hygiene products that are also comfortable for users, as hand sanitizers tend to be harsh on the skin, so we took on the challenge to develop and start production in record time. The Archroma team in Pakistan won’t rest in fighting the COVID-19 pandemic, and hopes this new product will help to stop the spread of the virus and the suffering that it causes.”

Source:

EMG for Archroma

(c) Bangladesh Apparel Exchange (BAE)
12.11.2019

11th Bangladesh Denim Expo Ends Highlighting Responsibility

The 11th Bangladesh Denim Expo attracted 99 exhibitors from 11 countries and once again proved itself the most significant show of its kind in Bangladesh. In total there were 5,692 visitors – a remarkable achievement.

The great and good of this diverse industry once again descended on the expo which illustrated, once again, that the denim sector of Bangladesh is in rude health.

In this edition exhibitors displayed fabrics, garments, threads, machinery, finishing equipment and accessories, positioning the show as a true representation of Bangladesh’s denim industry - the second largest denim exporter to the EU and third largest to the United States. The expo also saw other participating countries including china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

Responsibility was the theme of the 11th Bangladesh Denim Expo. Founder and CEO Bangladesh Denim Expo Mostafiz Uddin said: “It is the duty of all stakeholders in the denim industry to acknowledge their responsibility and to analyse the business practices for the benefit of all.”

The 11th Bangladesh Denim Expo attracted 99 exhibitors from 11 countries and once again proved itself the most significant show of its kind in Bangladesh. In total there were 5,692 visitors – a remarkable achievement.

The great and good of this diverse industry once again descended on the expo which illustrated, once again, that the denim sector of Bangladesh is in rude health.

In this edition exhibitors displayed fabrics, garments, threads, machinery, finishing equipment and accessories, positioning the show as a true representation of Bangladesh’s denim industry - the second largest denim exporter to the EU and third largest to the United States. The expo also saw other participating countries including china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

Responsibility was the theme of the 11th Bangladesh Denim Expo. Founder and CEO Bangladesh Denim Expo Mostafiz Uddin said: “It is the duty of all stakeholders in the denim industry to acknowledge their responsibility and to analyse the business practices for the benefit of all.”

 Sustainability Takes Centre-stage At Leading Bangladesh Shows (c) Bangladesh Apparel Exchange
15.10.2019

Sustainability Takes Centre-stage At Leading Bangladesh Shows

  • Bangladesh’s biggest denim expo takes place 5-6 November
  • The show runs concurrently with the Sustainable Apparel Forum Bangladesh
  • From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

  • Bangladesh’s biggest denim expo takes place 5-6 November
  • The show runs concurrently with the Sustainable Apparel Forum Bangladesh
  • From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

H&M Group is collaborating with Bangladesh Denim Expo for the forthcoming 11th edition of the event and a number of guest speakers will be present from the company, including Pierre Borjesson, head of sustainability, global production. Other guest speakers include Andrew Olah, the founder of Kingpins Denim show, Alice Tonello, R&D director with the Tonello Group, world renowned denim designer, Piero Turk and Jordi Juani, Asia regional director with Jeanologia.

Through a series of product displays, presentations, seminar sessions & panel discussions, the Expo will encourage healthy debate and interaction among exhibitors and visitors to champion a more responsible denim industry. One of these, of course, is sustainability and within this sits the issue of responsibility – an overriding theme of this year’s event. Denim manufacture faces huge challenges with regards its social and environmental responsibility, with production techniques having potentially far-reaching ramifications for the environment as well as people involved in the production process.

However, the industry and its supply chain are making impressive progress on these issues with Bangladesh – now the world’s largest producer of denim – leading the way in terms of addressing some of the sustainability challenges relating to denim production, including excessive use of water and chemicals. Mostafiz Uddin is the organiser of Bangladesh Denim Expo. Uddin has watched with interest the evolution of the denim industry, with each Expo marking continued and gradual progress being made by the more progressive players in the industry.

Uddin says: “The way that business and product development is conducted can have far reaching consequences on the environment, on the people that make the product and the product’s end use & life-span. “It is the duty of all stakeholders in the apparel industry to acknowledge this responsibility and to analyse our business practices, for the benefit of all.” Emphasising the theme of responsibility within Denim Expo is the fact that revenues from the expo support the running and presentation of the Sustainable Apparel Forum.

Sustainable Apparel Forum

The Sustainable Apparel Forum (SAF) is the biggest annual sustainable apparel event in Bangladesh. Bangladesh Apparel Exchange (BAE) along with Bangladesh Garment Manufacturers and Exporters Association (BGMEA) as co-organiser will jointly carry out the 2nd edition of the SAF on 5th Nov 2019.

This is the second edition of the Sustainable Apparel Forum, with the first-ever forum held in 2017 in Dhaka. The objective of this year’s forum is accelerating the momentum of sustainability in Bangladesh apparel industry.

The forum will see more than 50 speakers gathered from Bangladesh and overseas sharing expert opinions across five panel discussions covering current issues in the country’s apparel industry. These include human resources, transparency in business, water conservation, purchasing practices, sustainable chemical management, waste management, circular economy in textiles and climate change to name a few.

Additionally, the conference will host several knowledge building technical presentations from renowned organisations which will cover different issues relating to sustainability, including waste management, protection of the environment and better working conditions.

Speakers at the show include Md. Shahriar Alam, MP, Honourable State Minister, Ministry of Foreign Affairs, Bangladesh, H. E. Benoit Préfonatine High Commissioner, High Commission of Canada, Bangladesh, and Dr. Rubana Huq President, Bangladesh Garment Manufacturers’ and Exporters’ Association, Sheikh Fazle Fahim, President, Federation of Bangladesh Chamber of Commerce & Industries, Pierre Börjesson, Head of Sustainability – Global Production, H&M Group, Tuomo Poutiainen, Country Director, International Labor Organization, Peter McCallister, Executive Director, Ethical Trading Initiative and H.E. Winnie Estrup Petersen Ambassador, Embassy of Denmark, Bangladesh.

Prior to this year’s conference, the Embassy of the Kingdom of the Netherlands in Bangladesh and the Sweden Embassy in Bangladesh will also co-host two roundtable discussion in collaboration with BAE and in association with BGMEA on 4 November, 2019, while H&M, Better Work Bangladesh and C&A Foundation are partners in the event.
The conference will be followed by showcasing different innovative, sustainable & best work practices in RMG manufacturing factories in Bangladesh. Following the discussions, a series of recommendations will be made, and a Sustainability Roadmap for the Bangladesh apparel industry will be formulated.

This year’s SAF promises to be the biggest yet. Added by Mr Mostafiz Uddin in the recent press briefing for the event: “The title for this year’s Sustainable Apparel Forum is enabling sustainability through policy and leadership. The time for talking on sustainability issues is over. It is now time for actions. That’s why the focus of this year’s show is on practical, pragmatic actions the textile industry can adopt to improve its environmental footprint.”

(c) Messe Frankfurt GmbH
16.09.2019

Intertextile Shanghai Home Textiles 25th anniversary with increase in exhibitors

Celebrating 25 years as Asia’s leading trade fair for the interior textiles industry, Intertextile Shanghai Home Textiles opened its doors from 28 – 31 August. Covering seven halls at the National Exhibition and Convention Center, around 1,150 exhibitors from 27 countries and regions displayed their latest products and technologies for the home and contract textiles sectors (2018: 1,091).

Exhibitor highlights from 2019

Celebrating 25 years as Asia’s leading trade fair for the interior textiles industry, Intertextile Shanghai Home Textiles opened its doors from 28 – 31 August. Covering seven halls at the National Exhibition and Convention Center, around 1,150 exhibitors from 27 countries and regions displayed their latest products and technologies for the home and contract textiles sectors (2018: 1,091).

Exhibitor highlights from 2019

•    Country and region pavilions from Belgium, Pakistan, Taiwan and Turkey
•    Expanded finished products zone: more sourcing options were available in hall 8.1 this year for finished products and a range of home décor items.
•    Finished curtain zone located in the North Hall
•    Bed, bath, kitchen and table: suppliers from China were joined by exhibitors from Australia, Austria, Denmark, Hungary, Japan and elsewhere in these product categories.
•    Whole-home and editor zones: buyers could source the latest luxury branded products and gain decoration concept inspiration in these high-end zones.
•    Textile design zone: 20 design studios from 12 countries including China, Finland, France, India, Japan, Korea, the Netherlands, Portugal, Switzerland and the UK showcased their avant-garde collections.

 

(c) Monforts Textilmaschinen GmbH & Co. KG
12.07.2019

Monforts: Introduction of CYD multi-colour yarn dyeing system at ITMA 2019

A revolutionary new system for yarn dyeing based on the proven Econtrol® dyeing system for fabrics will be introduced by A. Monforts Textilmaschinen GmbH & Co. KG at ITMA 2019 in Barcelona, Spain, from June 20-26.

This latest CYD denim processing technology integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity.

“Denim finishing is a field in which Monforts has an undisputed lead and we have been working closely with our many partners in the key denim manufacturing countries of China, Bangladesh, India, Pakistan, Mexico and Brazil to develop new advanced solutions,” says Monforts Head of Denim Hans Gerhard Wroblowski. “The CYD system has been developed in response to a very strong market demand.”

A revolutionary new system for yarn dyeing based on the proven Econtrol® dyeing system for fabrics will be introduced by A. Monforts Textilmaschinen GmbH & Co. KG at ITMA 2019 in Barcelona, Spain, from June 20-26.

This latest CYD denim processing technology integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity.

“Denim finishing is a field in which Monforts has an undisputed lead and we have been working closely with our many partners in the key denim manufacturing countries of China, Bangladesh, India, Pakistan, Mexico and Brazil to develop new advanced solutions,” says Monforts Head of Denim Hans Gerhard Wroblowski. “The CYD system has been developed in response to a very strong market demand.”