From the Sector

Reset
383 results
Mobile robot system for automated loading of a bobbin creel (c) STFI
12.05.2022

STFI with sustainable and digital innovations at Techtextil 2022

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

Highlights at Techtextil 2022
The greened façade tile is a system with which large building surfaces can be cost-effectively greened through a simple, modular segment structure. In addition to insulating the building, the system has been created to meet the design requirements of a modern city centre; low-maintenance greening is made possible through functional integration in the textile carrier layer and coordinated plant selection.

Moulded components made of natural fibre nonwovens are increasingly used in the automotive sector. Conventional nonwovens currently have uniform masses per unit area. Technical solutions for load-oriented component reinforcement and the resulting optimised use of materials represent an enormous economic potential. The basic idea of “optiformTEX” was therefore to specifically influence the mass per unit area distribution in the pile before the semi-finished product is consolidated. As a result, a textile-technological process and the corresponding plant component were successfully developed.

Future-oriented materials are offered by developments from the field of renewable raw materials in combination with bio-based resin systems: In the “Gro-Coce” project, an innovative ceiling system was developed by combining sustainable building products and methods. Currently, a high-performance hemp-based semi-finished product as well as the steps for its reproducible production by means of textile surface formation is developed by the research team. Initial application and load tests of the hemp-based semi-finished products on wooden beams confirmed the high performance potential of the natural fibre materials.

Special functional textiles are based on composite materials with coatings or membranes. The previous production of the coatings/membranes poses ecological and health risks. At STFI, solvent-free, purely aqueous coating systems and a technology for their application were therefore developed for the protective textile sector, resulting in a breathable, waterproof and wash-resistant textile coating.

The central highlight of the STFI's presence at the fair is a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel. At the STFI, the robot is part of the “textile factory of the future”, where a play mat is woven and processed step by step along the textile chain.

(c) NewStore GmbH
11.05.2022

TOM TAILOR setzt auf digitales Wachstum mit NewStore Consumer App

NewStore, eine modulare, mobile Omnichannel-Cloud-Plattform für Einzelhandelsmarken weltweit, gab bekannt, dass Tom Tailor eine NewStore Consumer App eingeführt hat. Die Casual Fashion- und Lifestyle-Marke bietet nun ein mobiles Einkaufserlebnis an, das die Kundenbindung erhöht und den Umsatz steigert.

"Mobile Verkäufe sind ein Schlüsselfaktor für Tom Tailor, aber um diesen Kanal wirklich zu nutzen, mussten wir unsere Verbraucher-App aktualisieren", sagte Hendrik Reuter, Director of eCommerce und Consumer Engagement, bei Tom Tailor. "Wir haben uns für NewStore entschieden, weil diese Lösung einfach besser ist als alles, was wir bisher gesehen haben. Die neue App gibt unseren Kunden das Erlebnis eines Flagship-Stores in die Hand."

NewStore, eine modulare, mobile Omnichannel-Cloud-Plattform für Einzelhandelsmarken weltweit, gab bekannt, dass Tom Tailor eine NewStore Consumer App eingeführt hat. Die Casual Fashion- und Lifestyle-Marke bietet nun ein mobiles Einkaufserlebnis an, das die Kundenbindung erhöht und den Umsatz steigert.

"Mobile Verkäufe sind ein Schlüsselfaktor für Tom Tailor, aber um diesen Kanal wirklich zu nutzen, mussten wir unsere Verbraucher-App aktualisieren", sagte Hendrik Reuter, Director of eCommerce und Consumer Engagement, bei Tom Tailor. "Wir haben uns für NewStore entschieden, weil diese Lösung einfach besser ist als alles, was wir bisher gesehen haben. Die neue App gibt unseren Kunden das Erlebnis eines Flagship-Stores in die Hand."

Mit NewStore Studio, dem Content-Management-System für die App, verfügt Tom Tailor über alle nötigen Tools, um eine moderne und ansprechende App zu pflegen. Die Marke wird auch von der Tatsache profitieren, dass NewStore Consumer Apps nachweislich die Nutzung um das 2,5-fache erhöhen und die Konversionsraten um das 7-fache über denen einer traditionellen Website liegen. Da sich NewStore nahtlos in Scayle, die E-Commerce-Plattform von Tom Tailor, integrieren lässt, ist es zudem einfacher denn je, die App auf dem neuesten Stand zu halten und genaue Produkt- und Bestandsinformationen in Echtzeit bereitzustellen.

"Die Verbraucher sind mobiler denn je, daher müssen Marken wie Tom Tailor über den traditionellen E-Commerce und den stationären Handel hinaus denken", sagt Stephan Schambach, Gründer und CEO von NewStore. "Durch die Entwicklung einer nativen App, die die digitalen und physischen Kanäle von Tom Tailor ergänzt, hat NewStore der Marke eine neue, leistungsstarke Möglichkeit gegeben, mit ihren treuesten Kunden zu interagieren."

Source:

NewStore GmbH

After Moody's, Standard & Poor's also upgrades SGL Carbon’s rating (c) SGL Carbon
SGL
11.05.2022

After Moody's, Standard & Poor's also upgrades SGL Carbon’s rating

Standard & Poor's Global Ratings (S&P) raises its long-term rating for SGL Carbon to B- and its issue rating on its financial instruments to B. The outlook for the company is rated as stable by the renowned rating agency.

S&P Global Ratings explains the upgrade of SGL's rating with the company's improved capital structure and the reduction of net debt. The rating agency expects SGL Carbon to generate positive free cash flow in the coming years, which will support the reduction in absolute debt.

For the future development of SGL Carbon, S&P assumes an improvement in profitability based in particular on the expansion of products and materials for the future-oriented core markets of mobility, energy transition and digitalization, besides the savings from the restructuring.

"We are pleased that our operational successes and the already advanced trans-formation of SGL Carbon have been honored by the two major rating agencies - Moody's and S&P - by upgrading the ratings. We also see this as a motivation for the further development of SGL Carbon," explains Thomas Dippold, Chief Financial Officer of SGL Carbon SE.

Standard & Poor's Global Ratings (S&P) raises its long-term rating for SGL Carbon to B- and its issue rating on its financial instruments to B. The outlook for the company is rated as stable by the renowned rating agency.

S&P Global Ratings explains the upgrade of SGL's rating with the company's improved capital structure and the reduction of net debt. The rating agency expects SGL Carbon to generate positive free cash flow in the coming years, which will support the reduction in absolute debt.

For the future development of SGL Carbon, S&P assumes an improvement in profitability based in particular on the expansion of products and materials for the future-oriented core markets of mobility, energy transition and digitalization, besides the savings from the restructuring.

"We are pleased that our operational successes and the already advanced trans-formation of SGL Carbon have been honored by the two major rating agencies - Moody's and S&P - by upgrading the ratings. We also see this as a motivation for the further development of SGL Carbon," explains Thomas Dippold, Chief Financial Officer of SGL Carbon SE.

More information:
SGL Carbon
Source:

 SGL Carbon

06.05.2022

adidas grows double-digit in Western markets in Q1 2022

  • Currency-neutral sales down 3% as supply constraints reduce top-line by € 400 million
  • Western markets continue to show strong momentum with combined currency-neutral sales growing 13% across North America (+13%), EMEA (+9%) and Latin America (+38%)  
  • Gross margin down 1.9pp to 49.9% driven by significantly higher supply chain costs
  • Operating margin of 8.2% reflecting additional investments into brand, DTC, and digital
  • Net income from continuing operations reaches € 310 million
  • FY 2022 outlook for revenue and net income confirmed at the lower end due to the impact from covid-19-related lockdowns in Greater China

“In the first quarter, consumer demand for our brand and products was strong in all Western markets. Our combined sales in North America, EMEA and Latin America grew at a double-digit rate.

  • Currency-neutral sales down 3% as supply constraints reduce top-line by € 400 million
  • Western markets continue to show strong momentum with combined currency-neutral sales growing 13% across North America (+13%), EMEA (+9%) and Latin America (+38%)  
  • Gross margin down 1.9pp to 49.9% driven by significantly higher supply chain costs
  • Operating margin of 8.2% reflecting additional investments into brand, DTC, and digital
  • Net income from continuing operations reaches € 310 million
  • FY 2022 outlook for revenue and net income confirmed at the lower end due to the impact from covid-19-related lockdowns in Greater China

“In the first quarter, consumer demand for our brand and products was strong in all Western markets. Our combined sales in North America, EMEA and Latin America grew at a double-digit rate. Backed by an exceptionally strong wholesale order book and relentless focus on driving growth in our own DTC channels, we expect this positive development to continue for the rest of the year,” said adidas CEO Kasper Rorsted. “In the East, we will return to growth in Asia-Pacific in the second quarter, while we expect the challenging market environment in Greater China to continue. With strong double-digit growth in the vast majority of our markets, representing more than 80% of our business, we are well positioned for success in 2022. “

For the full press release, see attached document.

Source:

adidas AG

05.05.2022

adidas und Foot Locker, Inc. announce partnership for sports community and sneaker culture

adidas AG and Foot Locker, Inc. announced a new and enhanced partnership built around product innovation, elevated experiences, and deeper consumer connectivity. This enhanced relationship will establish Foot Locker as the lead partner for adidas in the basketball category, accelerate energy and hype launches, as well as include the development and expansion of key franchises across women’s, kids, and apparel. Including all Foot Locker banners in North America, EMEA, and Asia-Pacific, the new strategic partnership will target over $2 billion in retail sales by 2025, nearly tripling levels from 2021. In 2022, adidas expects to generate incremental revenues of up to €100 million as a result of the new partnership.  

adidas AG and Foot Locker, Inc. announced a new and enhanced partnership built around product innovation, elevated experiences, and deeper consumer connectivity. This enhanced relationship will establish Foot Locker as the lead partner for adidas in the basketball category, accelerate energy and hype launches, as well as include the development and expansion of key franchises across women’s, kids, and apparel. Including all Foot Locker banners in North America, EMEA, and Asia-Pacific, the new strategic partnership will target over $2 billion in retail sales by 2025, nearly tripling levels from 2021. In 2022, adidas expects to generate incremental revenues of up to €100 million as a result of the new partnership.  

Foot Locker will lead adidas' basketball offering, led by Fear of God founder and designer Jerry Lorenzo, spanning the lifestyle and performance categories, and develop exclusive positions in both areas. In addition, the collaboration will focus on key Originals franchises including NMD, Superstar and Stan Smith, and on the adidas influencer partnership portfolio. It will also include a prominent role for Foot Locker in the launch of adidas’ new Sportswear product division targeting the lifestyle consumer.

To execute the new plan, adidas will provide Foot Locker with a dedicated team to deliver an elevated consumer experience both in stores and online to help create demand and elevate the marketplace. This will involve partnership on product development, exclusive Foot Locker positioning, increased product allocations, shared marketing spend, and an elevated premium presence across Foot Locker’s entire portfolio of banners with a special focus on key cities and communities that the companies jointly serve. Lastly, to provide consumers with a seamless consumer journey, on and offline, both partners will increase their digital focus and accelerate the rollout of the adidas partner program at Foot Locker.

Source:

adidas AG

Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term. (c) Lectra
Hélène Viot Poirier
04.05.2022

Ross McInnes and Hélène Viot Poirier join Lectra’s Board of Directors

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 
Daniel Harari, Chairman and Chief Executive Officer of Lectra, says: “We are delighted to welcome Ross McInnes and Hélène Viot Poirier to Lectra’s Board of Directors. Through Ross McInnes’ appointment, we will benefit from his extensive experience as a director of listed companies and his knowledge of Lectra’s challenges, as well as his expertise in strategy, management, finance, and governance. Hélène Viot Poirier has extensive knowledge of the digital world and the fashion market. Her appointment will enable the Board of Directors to benefit from her expertise in acquisition strategy, management and the development of environmentally responsible products”.
 
In the last five years, Ross McInnes has been a member of Lectra’s Board of Directors, and a member of the Audit Committee, the Compensation Committee and the Strategic Committee. This first mandate came to an end in April 2020. Ross McInnes is a graduate of the University of Oxford.
 
Since 2020, as an Independent Senior Advisor, she has supported strategic internal and external growth projects in the fashion, digital and consumer goods sectors. Hélène Viot Poirier is a graduate of HEC Paris.

Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  (c) EFI
EFI Fiery®
04.05.2022

Konica Minolta and EFI Fiery New Launch

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 
“With these new EFI Fiery DFEs, we continue to extend the range of what AccurioPress users can achieve,” said Olaf Lorenz, General Manager DX Branding Division Konica Minolta, Inc. “We are pleased to be the first to bring these powerful new DFE solutions into our portfolio as they bring more competitive capabilities to Konica Minolta’s digital printing portfolio.”
 
EFI Fiery FS500 Pro servers offer a higher value proposition
 
“The Fiery FS500 Pro new platform offers advanced speed, higher automation and more capability than other digital front ends,” said John Henze, vice president of sales and marketing, EFI Fiery. “Intelligent automation solutions in these new EFI Fiery DFEs also save customers labour cost and time by minimising the need for manual inspection of print jobs, improving automated u management, and eliminating the need to print a test file to determine where to place finishing lines.
 
“All this decreases cycle time and increases customers’ profit opportunities, while ensuring that they can delight their clients with printing that gets completed accurately and quickly. Reducing the time prepress and press operators must spend on these repetitive tasks also helps print business owners make staff more efficient, offsetting the difficulties they have hiring and retaining talent in today’s labour-constrained economy.”

Source:

EFI GmbH

(c) Mahlo GmbH + Co. KG
04.05.2022

Altun Tekstil acquires weft straighteners from Mahlo

Turkish company Altun Tekstil, a manufacturer of home textiles and upholstery fabrics, has ordered a total of five of the latest Orthopac RVMC-15 weft straighteners from Mahlo.

The production of textured yarns, weaving and raschel knitting as well as dyeing and finishing is included in Altun’s operations. While the focus is on tulle curtains and upholstery, the company’s fabric range also encompasses a wide variety for apparel.

When investing in the future, Altun Tekstil has consistently trusted in Mahlo and has installed 10 Mahlo Orthopac RVMC-15 weft straighteners in its two plants since 2016.

Lowest residual distortion at highest speed
All the Mahlo weft straighteners Orthopac RVMC-15 are integrated into existing production lines. Mahlo’s latest weft straightener is fit to interact and communicate via the newly mSmart concept with all production lines and provide historical data, which help to improve the production processes.

Turkish company Altun Tekstil, a manufacturer of home textiles and upholstery fabrics, has ordered a total of five of the latest Orthopac RVMC-15 weft straighteners from Mahlo.

The production of textured yarns, weaving and raschel knitting as well as dyeing and finishing is included in Altun’s operations. While the focus is on tulle curtains and upholstery, the company’s fabric range also encompasses a wide variety for apparel.

When investing in the future, Altun Tekstil has consistently trusted in Mahlo and has installed 10 Mahlo Orthopac RVMC-15 weft straighteners in its two plants since 2016.

Lowest residual distortion at highest speed
All the Mahlo weft straighteners Orthopac RVMC-15 are integrated into existing production lines. Mahlo’s latest weft straightener is fit to interact and communicate via the newly mSmart concept with all production lines and provide historical data, which help to improve the production processes.

The fully integrated units benefit from universal control technology and the intuitive Mahlo mSmart G15 visualization concept. The HMI has been optimized for userfriendliness. The visualisation concept is constantly enhanced and ready for Industry 4.0. The path to a digital future within Altun is prepared.

Source:

Mahlo GmbH + Co. KG

(c) BVMed
03.05.2022

BVMed Digital-Talk: Datenschutzregelungen harmonisieren und forschende MedTech-Industrie einbeziehen

In Deutschland greifen vielfältige Regelungen und Gesetze rund um das Thema Datenschutz und Gesundheitsdaten. Diese Heterogenität stellt eine Hürde für die optimale Nutzung von Gesundheitsdaten zur Verbesserung der Gesundheitsversorgung dar. Das beschreiben die Teilnehmer:innen aus Politik, Recht und Industrie des Digital-Talks des Bundesverbands Medizintechnologie e.V., BVMed, am 28. April 2022. „Wir sehen die dringende Erfordernis, die digitale Transformation der Prozesse voranzutreiben, zu harmonisieren, vorhandene Daten zu nutzen und auch die privaten Einrichtungen zur Forschung und Entwicklung mitzunehmen“, so Franziska Hoppermann, CDU-Abgeordnete und Mitglied im Digitalausschuss des Deutschen Bundestags. Dem stimmte Prof. Dr. Dr. Christian Dierks, Rechtsanwalt und Geschäftsführer von Dierks+Company, zu. Ein Zugriff der Industrie auf Gesundheitsdaten sei besonders wichtig, denn sie „investiert in Forschung und Entwicklung und geht die damit verbundenen Risiken ein, um Gesundheitslösungen zu entwickeln“, beschreibt Prof. Dierks.

In Deutschland greifen vielfältige Regelungen und Gesetze rund um das Thema Datenschutz und Gesundheitsdaten. Diese Heterogenität stellt eine Hürde für die optimale Nutzung von Gesundheitsdaten zur Verbesserung der Gesundheitsversorgung dar. Das beschreiben die Teilnehmer:innen aus Politik, Recht und Industrie des Digital-Talks des Bundesverbands Medizintechnologie e.V., BVMed, am 28. April 2022. „Wir sehen die dringende Erfordernis, die digitale Transformation der Prozesse voranzutreiben, zu harmonisieren, vorhandene Daten zu nutzen und auch die privaten Einrichtungen zur Forschung und Entwicklung mitzunehmen“, so Franziska Hoppermann, CDU-Abgeordnete und Mitglied im Digitalausschuss des Deutschen Bundestags. Dem stimmte Prof. Dr. Dr. Christian Dierks, Rechtsanwalt und Geschäftsführer von Dierks+Company, zu. Ein Zugriff der Industrie auf Gesundheitsdaten sei besonders wichtig, denn sie „investiert in Forschung und Entwicklung und geht die damit verbundenen Risiken ein, um Gesundheitslösungen zu entwickeln“, beschreibt Prof. Dierks. Der Digital-Talk widmete sich dem Thema „Nutzung von Gesundheitsdaten“ und diskutierte Herausforderungen sowie mögliche Lösungen für eine bessere Gesundheitsversorgung.

In den letzten Jahren wurden viele Initiativen und Aktivitäten für eine digitale Gesundheitsversorgung angestoßen. Diese Entwicklung soll laut Koalitionsvertrag fortgesetzt werden. Dabei wird von der MedTech-Branche insbesondere das sogenannte „Gesundheitsdatennutzungsgesetz“ erwartet. Der BVMed begrüßt ein solches Gesetz und setzt sich dafür ein, dass auch der Gesundheitsindustrie der Zugang zu Daten ermöglicht wird. Deshalb widmete sich der erste BVMed Digital-Talk 2022 direkt der Fragestellung „Zwischen Datenschatz und Datenschutz: 2022 als Schicksalsjahr für Nutzung von Gesundheitsdaten?“. Moderiert wurde die Veranstaltung von Dr. Joachim Haes, Sprecher des BVMed-Arbeitskreises Digitalisierung sowie Director Government Affairs DACH und Osteuropa bei Intuitive Surgical.

Weitere Informationen finden Sie hier.

29.04.2022

Baldwin showcases connected process technologies at Print4All

Baldwin Technology Company Inc. will showcase its latest high-performance color management, surface treatment, LED-UV curing, inspection, defect detection and Industry 4.0-based analytics solutions at Print4All, which is taking place May 3 to 6 at Fiera Milano in Italy.

One of its latest advances — which will be on display at Print4All — is the XP Quatro Series™ LED-UV curing module with one head and two frequencies for broader applications. It is designed to economically and efficiently cure LED-formulated printing inks and coatings on sheetfed and web offset printing presses, as well as on larger-format flexo presses and digital print engines. The XP Quatro Series LED-UV enhances print quality, while operating at top speeds, driving increased productivity and profitability.

Italy’s ACM Flexible Packaging selected Baldwin as its LED-UV partner and became one of the first flexible film converters to offer all LED-UV curing in a narrow to mid-web format. This partnership established LED-UV printing as a growing production standard in flexible packaging and labels. Today, ACM is a 100% LED-UV, non-mercury facility.

Baldwin Technology Company Inc. will showcase its latest high-performance color management, surface treatment, LED-UV curing, inspection, defect detection and Industry 4.0-based analytics solutions at Print4All, which is taking place May 3 to 6 at Fiera Milano in Italy.

One of its latest advances — which will be on display at Print4All — is the XP Quatro Series™ LED-UV curing module with one head and two frequencies for broader applications. It is designed to economically and efficiently cure LED-formulated printing inks and coatings on sheetfed and web offset printing presses, as well as on larger-format flexo presses and digital print engines. The XP Quatro Series LED-UV enhances print quality, while operating at top speeds, driving increased productivity and profitability.

Italy’s ACM Flexible Packaging selected Baldwin as its LED-UV partner and became one of the first flexible film converters to offer all LED-UV curing in a narrow to mid-web format. This partnership established LED-UV printing as a growing production standard in flexible packaging and labels. Today, ACM is a 100% LED-UV, non-mercury facility.

Baldwin’s Print4All booth also will showcase Industry 4.0 and industrial Internet of Things-enabled technologies that work together to achieve greater uptime, productivity and automation. Featured solutions pair sensor-gathered data with operational data from Baldwin equipment to gain live, actionable insights to improve production monitoring, so printers and converters can achieve new levels of color consistency with fewer defects and greater assurance of curing.

Other highlights in Baldwin’s booth include the Corona Slim treatment system, which ensures the exact dyne levels needed for perfect uniformity in application, and the Guardian PQV 100% Print Inspection, which provides complete print quality verification from prepress through production, reporting and archiving.

Source:

Barry-Wehmiller

Hochschule Reutlingen: Studierende präsentieren erste virtuelle 3D-Fashion Show Grafik: Marilou Gunzert, Hochschule Reutlingen
27.04.2022

Hochschule Reutlingen: Studierende präsentieren erste virtuelle 3D-Fashion Show

Im Schwerpunkt Fashion and Lifestyle Design setzten Studierende der Hochschule Reutlingen Entwürfe erstmals digital um und präsentieren ihre Ergebnisse in Form einer animierten 3D-Fashion Show. Ab dem 28. April sind die digitalen Entwürfe in einem Virtual Release Premiere dauerhaft online zu sehen.

Die Umsetzung von Kleidung als Simulation gewinnt in der Bekleidungs- und Modeindustrie eine immer größere Bedeutung. Technologie und Kreativität ergänzen sich dabei optimal und bieten neben enormen Zukunftschancen auch im Kontext Metaverse völlig neue Entwicklungsbereiche für Designerinnen und Designer. Besonders der digitale 3D-Entwurf bietet geradezu unerschöpfliche Möglichkeiten und ist ein Megatrend in der Branche. 

Im Schwerpunkt Fashion and Lifestyle Design setzten Studierende der Hochschule Reutlingen Entwürfe erstmals digital um und präsentieren ihre Ergebnisse in Form einer animierten 3D-Fashion Show. Ab dem 28. April sind die digitalen Entwürfe in einem Virtual Release Premiere dauerhaft online zu sehen.

Die Umsetzung von Kleidung als Simulation gewinnt in der Bekleidungs- und Modeindustrie eine immer größere Bedeutung. Technologie und Kreativität ergänzen sich dabei optimal und bieten neben enormen Zukunftschancen auch im Kontext Metaverse völlig neue Entwicklungsbereiche für Designerinnen und Designer. Besonders der digitale 3D-Entwurf bietet geradezu unerschöpfliche Möglichkeiten und ist ein Megatrend in der Branche. 

In einem gemeinsamen Projekt der Fakultät Textil & Design der Hochschule Reutlingen mit einem der großen Player und Pioniere der Branche, dem Unternehmen Browzwear, setzten Studierende des Schwerpunkts Fashion and Lifestyle Design im Studiengang Textildesign/Modedesign vergangenes Semester erstmals ihre Kreationen in einer virtuellen Welt als animiertes Video um. Unter Leitung von Prof. Natalie Seng (Fashion & Lifestyle Design) sowie Doktorandin Gabriela Kosel (Bereich Clothing & Textile Manufacturing/Prof. Dr.- Ing. Katerina Rose) knüpft die Fakultät damit direkt an den allerneuesten und zukunftsweisenden Stand der Technik in der Bekleidungssimulation an.

Mit Hilfe eines innovativen Workflows und Lehrkonzeptes konnten die jungen Designstudierenden ihre Outfits direkt am selbstgestalteten Avatar präsentieren. Neben den virtuellen Entwürfen konnten so auch eigene digitale Umgebungen erschaffen werden. Intensive interne Workshops mit Unterstützung des Kooperationspartners Browzwear ermöglichten den Studierenden den direkten Einstieg in den digitalen Entwurf auf State of the Art-Niveau. Die virtuelle Darstellung und Simulation von Bekleidung bildet auch weiterhin einen festen Bestandteil in Forschung und Lehre an der Fakultät Textil & Design. Zum Wintersemester 2022/23 stehen die Zeichen in Reutlingen auf Neuanfang: Zeitgleich mit der Eröffnung des TEXOVERSUMS, dem vom Arbeitgeberverband Südwesttextil gestifteten europaweiten Leuchtturm für textile Ausbildung und Innovation, startet unter anderem der Bachelorstudiengang „Fashion and Textile Design“ neu und ersetzt mit angepassten Inhalten für neue Studierende den auslaufenden Studiengang „Textildesign/Modedesign“.

Source:

Hochschule Reutlingen

(c) Eton
22.04.2022

More localised and automated textile manufacturing with TMAS technologies

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Source:

AWOL Media

21.04.2022

Tata Communications announces its results for the fourth quarter and the full financial year 22

Tata Communications, a global digital ecosystem enabler, announces its financial results for the quarter and full year ended 31st March 2022.

Consolidated financial highlights:

Tata Communications, a global digital ecosystem enabler, announces its financial results for the quarter and full year ended 31st March 2022.

Consolidated financial highlights:

  • Consolidated revenue for FY22 came in at INR 16,725 Crores (USD 2,244.9 Mn) and at INR 4,263 Crores (USD 567.0 Mn) for Q4 FY22
  • Most of the segments across Core Connectivity, Digital Platforms & Services, and Incubation services of Data business witnessed healthy growth:
    • Data business grew by 2.1% QoQ and 1.4% YoY
    • Within Digital Platforms, all segments except Collaboration witnessed double digit YoY growth and strong sequential growth
    • Core Connectivity witnessed a revenue growth of +0.5% QoQ and +1.4% YoY
    • Incubation portfolio grew by 49.1% QoQ and 67.6% YoY
  • Consolidated EBITDA stood at INR 4,227 Crores (USD 567.3 Mn); with margins in at 25.3%, expanding by 40 Bps YoY. For the quarter, margin came in at 24.5%
  • Consolidated PAT stood at INR 1,482 Crores (USD 198.9 Mn) as compared to a profit of INR 1,251 Crores (USD 168.4 Mn) in FY21, registering a growth of + 18.5% YoY
  • CAPEX for this year was INR 1,608 Crores (USD 216.9 Mn) as compared to INR 1,421 Crores (USD 191.4 Mn) in FY21; Free Cash Flow for FY22 was at INR 2,619 Crores (USD 345.6 Mn)

The Board has recommended a dividend of INR 20.7 per share as a result of the Company reporting strong profitability.

Source:

Tata Communications / Harvard Engage! Communications

Sappi at the FESPA Global Print Expo 2022 in Berlin (c) Sappi Europa
Sappi at the FESPA Global Print Expo 2022
20.04.2022

Sappi at the FESPA Global Print Expo 2022 in Berlin

  • Dye Sublimation Papers that bring colour to life

At the upcoming FESPA Global Print Expo 2022 (31 May to 3 June) in Berlin, leading specialty papers manufacturer Sappi will be showcasing its extensive portfolio of coated and uncoated dye sublimation papers, containerboard and silicone base papers. At Europe’s most significant trade fair for screen and digital printing, large-format printing and textile printing, visitors to stand 4.2-D20 will have an opportunity to see for themselves the many qualities and diverse applications of Sappi’s papers:

  • Dye Sublimation Papers that bring colour to life

At the upcoming FESPA Global Print Expo 2022 (31 May to 3 June) in Berlin, leading specialty papers manufacturer Sappi will be showcasing its extensive portfolio of coated and uncoated dye sublimation papers, containerboard and silicone base papers. At Europe’s most significant trade fair for screen and digital printing, large-format printing and textile printing, visitors to stand 4.2-D20 will have an opportunity to see for themselves the many qualities and diverse applications of Sappi’s papers:

  • Experience the comprehensive portfolio of sublimation papers
  • Learn about Sappi’s plans to support further market growth
  • See the benchmark products for corrugated board production
  • Explore the full range of silicone base papers

Investment in increasing production capacities for sublimation papers
Sappi’s theme for this year’s FESPA Global Print Expo is “Seed. Thrive. Earn.” Sappi, one of the world’s leading manufacturers of speciality papers, has indeed planted a seed by recognising the rapidly growing importance of sublimation papers for digital transfer printing. The company recently announced that it will be investing a sum in the low double-digit million euros over the next two years in the expansion of its “Centre of Excellence” for speciality papers at its Carmignano site in northern Italy. The investment aims to increase production capacity to support further growth of the dye sublimation paper business. It will also further improve the company’s first-class service, while shortening delivery times.

Comprehensive product portfolio of sublimation papers for a multitude of applications
Thanks to previous investments, Sappi is ideally positioned to offer an extensive portfolio of dye sublimation papers for digital transfer printing. These are constantly being improved and adapted to the latest market requirements and ongoing developments in sustainability. Sublimation papers are used in the fashion, home textile, sportswear and sports equipment sectors as well as in the soft signage and hard substrates industries.

This year, all papers will be displayed with new designs and materials to give visitors the best possible overview and insight into the numerous application possibilities adapted to a variety of machine types and speeds. In addition to Sappi Basejet, an uncoated sublimation paper, the complete Transjet brand product family will be presented.

High-quality containerboard products for corrugated board applications
For applications such as promotion displays, high-quality packaging or e-commerce cartons, Sappi offers a portfolio of coated and uncoated liner qualities. These guarantee brilliant colour reproduction as well as excellent contrast and improved readability. The 100 per cent virgin fibre Fusion range liners are today’s premium solutions for displays, consumer packaging, shelf-ready packaging and trays. With their homogeneous surface and high whiteness, the virgin fibre liners fulfil all the requirements for strong brand impact at POS.

A full spectrum of silicone base papers
Silicone base paper products complement Sappi’s portfolio at this year’s FESPA. Developed as release liners for self-adhesive applications such as automotive foiling, outdoor advertising and office materials, they offer exceptional siliconization properties as well as easy and efficient processing.

More information:
Sappi Europe Fespa Global Expo
Source:

Sappi Europe

19.04.2022

Sustainable fashion platform Manufy: Upgraded version with more functionalities

Manufy, a marketplace for sustainable fashion production, has launched a new version of their platform. The platform connects conscious brands with sustainable manufacturers in hopes to create a cleaner future for the clothing industry. Now decked out with many more functionalities, Manufy aims to facilitate sustainable business between both parties from start to finish.  

Over the course of the last year the Manufy team has been busy gathering feedback from its growing user base. The platform started out as a place where manufacturers and brands from Europe could connect and chat with each other, but the team found out both parties wanted more. “We constantly reached out to our users to listen to their needs. We’ve compiled all those ideas and implemented them in version two!” says Michiel Dicker, co-founder of Manufy.

Not only a full visual transformation, but many functionalities were added: “Users can now easily start a sampling process, organise projects from start to finish and get sustainability insights” Dicker says. “Manufy is becoming your one-stop-shop for all your sourcing needs!”

Manufy, a marketplace for sustainable fashion production, has launched a new version of their platform. The platform connects conscious brands with sustainable manufacturers in hopes to create a cleaner future for the clothing industry. Now decked out with many more functionalities, Manufy aims to facilitate sustainable business between both parties from start to finish.  

Over the course of the last year the Manufy team has been busy gathering feedback from its growing user base. The platform started out as a place where manufacturers and brands from Europe could connect and chat with each other, but the team found out both parties wanted more. “We constantly reached out to our users to listen to their needs. We’ve compiled all those ideas and implemented them in version two!” says Michiel Dicker, co-founder of Manufy.

Not only a full visual transformation, but many functionalities were added: “Users can now easily start a sampling process, organise projects from start to finish and get sustainability insights” Dicker says. “Manufy is becoming your one-stop-shop for all your sourcing needs!”

The start-up, which launched in december of 2020, has seen a sharp increase in user activity over the last year. With trade shows being canceled due to covid, lots of manufacturers and brands were looking for new ways to do business. Going digital was one of the logical steps.

The production requests being placed on the platform cover a wide range of garments. Hoodies and t-shirts are popular, but the Manufy team also sees lots of shoes, caps, bags, dresses, swimwear and lingerie requests coming in.

Another notable trend in the industry is the ever growing demand for sustainable clothing production. With reports on climate change coming out and more and more consumers asking for sustainable alternatives, brands are making an effort to source their products more responsibly. The fashion industry, being the second largest polluting industry, needs a sort of paradigm shift. “We should focus more on making lower quantity, higher quality products. Making it on demand would be best” says Dicker.

More information:
Manufy Sustainability
Source:

Manufy

11.04.2022

Kornit Digital auf der Kornit Fashion Week 2022 in Tel Aviv

Kornit Digital Ltd. präsentierte die Konvergenz von Design, Technologie und nachhaltiger Mode bei der Kornit Fashion Week 2022, die vom 3.-6. April in Tel Aviv stattfand. Bei dieser Veranstaltung wurden innovative Kollektionen in Verbindung mit branchenweit neuartigen Produkten und Technologien präsentiert.

Highlights:

Kornit Digital Ltd. präsentierte die Konvergenz von Design, Technologie und nachhaltiger Mode bei der Kornit Fashion Week 2022, die vom 3.-6. April in Tel Aviv stattfand. Bei dieser Veranstaltung wurden innovative Kollektionen in Verbindung mit branchenweit neuartigen Produkten und Technologien präsentiert.

Highlights:

  • Hunderte von Designern, Markenartiklern, Modeschöpfern, E-Commerce-Plattformen, Herstellern und virtuellen Modepionieren besuchten die Veranstaltungen in der Zentrale, in den FuE- und Produktionszentren von Kornit und an renommierten Veranstaltungsorten in Tel Aviv.        
  • Kornit präsentierte Technologien und Lösungen, darunter die Kornit Apollo-Plattform für den volldigitalen Textildirektdruck (DTG), die als innovativer Quantensprung für die Mainstream-Massenproduktion von Mode und Bekleidung auf dem milliardenschweren Textilmarkt angesehen wird, der bis heute durch veraltete, analoge und umweltverschmutzende Produktionsverfahren eingeschränkt ist.
  • Derzeit ist ein Trend zur Verlagerung der Massenproduktion von Textilien aus dem fernen in das nahe gelegene Ausland zu beobachten – mit Möglichkeiten zur schlanken Produktion von Kleinserien ohne Bestandsrisiken sowie grenzenloser Kreativität und Flexibilität für Designer und Modeschöpfer – möglich dank der neuen Lösung von Kornit für die Massenfertigung.
  • Außerdem präsentierte Kornit seine Kornit Atlas MAX Poly erstmals öffentlich, eine Lösung für die digitale Veredelung von Textilien in hohen Stückzahlen aus Polyester- und Polyestermischgewebe.
Source:

Kornit Digital / pr4u

Photo: Erema
07.04.2022

EREMA: New R&D centre for innovative recycling technologies

Construction machinery rolls into action again. The ground-breaking ceremony at the EREMA site in Ansfelden on April, 6 signals the start of work on a new R&D centre. Two halls with a total area of 1,550 square metres and a new office building with 50 workplaces will be built. The R&D centre will offer cross-departmental and cross-company test machines and laboratory for research and development of plastics recycling technologies to further advance the circular economy. Completion is scheduled for February 2023.

Plastics recycling is currently evolving very rapidly from a niche to a trend. This is driven by the legislative targets for plastics recycling that the European Union and many countries around the world have enacted, as well as by the European Green Deal, which aims to make Europe the first climate-neutral continent and in which the circular economy plays a very central role.

Construction machinery rolls into action again. The ground-breaking ceremony at the EREMA site in Ansfelden on April, 6 signals the start of work on a new R&D centre. Two halls with a total area of 1,550 square metres and a new office building with 50 workplaces will be built. The R&D centre will offer cross-departmental and cross-company test machines and laboratory for research and development of plastics recycling technologies to further advance the circular economy. Completion is scheduled for February 2023.

Plastics recycling is currently evolving very rapidly from a niche to a trend. This is driven by the legislative targets for plastics recycling that the European Union and many countries around the world have enacted, as well as by the European Green Deal, which aims to make Europe the first climate-neutral continent and in which the circular economy plays a very central role.

However, there is not just one recycling solution for all types of plastic waste, but rather different solutions depending on the type of plastic, the product and the application intended for the recycled plastic. While some plastics processing loops, such as for PET bottles, have already been closed, many other plastic waste streams still require a great deal of R&D in cooperation with everyone involved in the value chain to produce recycled pellets that meet the very highest standards for the production of new products. More space will be available for this in the new centre.

R&D is decentralised at EREMA. In recent years, approximately 5 percent of turnover was reinvested annually in research and development. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology, and special technologies with a view to further improving the quality of recycled pellets. They also focus on new recycling technologies for waste plastic materials for which there is currently no satisfactory circular economy solution. The decisive factor here is also to exploit the potential of digitalisation. By collecting and analysing machine data, not only can recycling processes and product quality be further improved, but we can also develop our digital service offering for our customers. Such offerings include customer-specific information tools that feature plant and process data, predictive maintenance and online support as well as commissioning via remote access.

For material tests, which are necessary for research and development work, an expanded machine park will be available following completion of the new R&D centre. Here, the recycling process can be evaluated end-to-end, including upstream and downstream processes such as shredding and further processing of the recycled pellets. The material tests are supported by detailed analysis in the professionally equipped laboratory, which will be relocated to the new premises and upgraded where necessary with the very latest lab equipment.

More information:
EREMA plastics recycling
Source:

EREMA Engineering Recycling Maschinen und Anlagen GmbH

(c) UNCG
07.04.2022

Archroma partners with University of North Carolina Greensboro on color expert education

Archroma, a leader in specialty chemicals towards sustainable solutions, has announced the launch of a collaboration with the University of North Carolina Greensboro (UNCG) and its Consumer, Apparel, and Retail Studies (CARS) department, aiming to further the education of its students in the area of color management expertise.

As per the agreement, Archroma will donate its color management tools for their design projects, gaining hands-on expertise that equips them for successful careers in the fashion and textiles industries.

The students will have access to a complete set of the ready-to-use color library developed by Archroma for cotton and polyester. The library, well known among fashion designers and stylists as the Color Atlas by Archroma®, which was launched in 2016 to provide off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Today, the Color Atlas contains 4’320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists, and 1,440 colors on polyester.

Archroma, a leader in specialty chemicals towards sustainable solutions, has announced the launch of a collaboration with the University of North Carolina Greensboro (UNCG) and its Consumer, Apparel, and Retail Studies (CARS) department, aiming to further the education of its students in the area of color management expertise.

As per the agreement, Archroma will donate its color management tools for their design projects, gaining hands-on expertise that equips them for successful careers in the fashion and textiles industries.

The students will have access to a complete set of the ready-to-use color library developed by Archroma for cotton and polyester. The library, well known among fashion designers and stylists as the Color Atlas by Archroma®, which was launched in 2016 to provide off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Today, the Color Atlas contains 4’320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists, and 1,440 colors on polyester.

Beside the physical Color Atlas library, the students in the CARS program will also have access to the full digital files for use in the industry-leading 3D fashion design and development software Browzwear VSticher.

The students will be able to use the Color Atlas books and the digital data as a color selection resources to use in a variety projects and assignments.

Source:

Archroma / EMG

(c) A. Monforts Textilmaschinen GmbH & Co. KG
07.04.2022

Montex stenter at ITM

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

Monforts and its Turkish representative Neotek are looking forward to the forthcoming ITM 22 international textile machinery show taking place from June 14-18 at the Tüyap Fair and Congress Centre in Istanbul, after a three-year break.

With the TwinAir heating chamber system within a Montex stenter, top and bottom airflows can be regulated completely independently of each other, ensuring heat is only applied when and where it is required. The Optiscan balancing system ensures continuous automatic evaluation of the distance between the nozzles and the fabric for highly economical and contact-free drying. The resulting constant evaporation rate within the stenter ensures optimum energy utilisation and also avoids markings on the fabric.

With the latest Montex stenters, overall energy savings of up to 40% can now be achieved compared to a conventional stenter with no heat recovery or energy optimisation measures like high-quality chamber insulation.

The Montex stenter also benefits from full digital control, with the Qualitex 800 PLC control system providing ease of operation and rapid access to line and management data, including full operating cost overviews, as well as maintenance monitoring.

Advances in digital technology mean that there are also now significant gains to be made in the retrofitting of existing Monforts machines with the latest automatic drives and control systems, going far beyond the basic replacement of spare parts.

“We will be emphasising the robustness and versatility of the Montex stenter for essential processes such as drying, stretching, heatsetting and coating at the Istanbul show,” said Monforts Area Sales Manager Thomas Päffgen.

“With energy prices rising steeply everywhere, features such as the MonforClean system, or the EcoBooster, in which waste heat from the drying process is used to pre-heat the drying air, are proving more invaluable than ever,” added Ahmet Kilic of Neotek. “Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation.”

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

Kornit Rewrites the Rules for Fashion and Textiles (c) Kornit
Shai-Shalom-Hi2
06.04.2022

Kornit Rewrites the Rules for Fashion and Textiles

  • Hundreds of designers, brands, creators, e-com platforms, manufacturers, and virtual fashion pioneers expected to attend VIP events at Kornit’s headquarters, R&D and production centers, and in major venues of Tel Aviv     
  • Kornit will unveil future technologies and solutions, including the revolutionary Kornit Apollo fully-digital mass production direct-to-garment (DTG) platform – considered a future game-changer for the mainstream mass production of fashion and apparel, a multi-billion-dollar market opportunity – constrained today by antiquated, analog, and polluting methods of production
  • Mass production of textile, traditionally off-shored, is going through an accelerated shift to near-shore production, significantly shorter production runs, lean-to-no inventory risk, and unlimited creativity and flexibility for designers and creators – all possible with Kornit’s new solution for mass production
  • Kornit will also unveil its Kornit Atlas MAX Poly – predicted to transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, suffering today from
  • Hundreds of designers, brands, creators, e-com platforms, manufacturers, and virtual fashion pioneers expected to attend VIP events at Kornit’s headquarters, R&D and production centers, and in major venues of Tel Aviv     
  • Kornit will unveil future technologies and solutions, including the revolutionary Kornit Apollo fully-digital mass production direct-to-garment (DTG) platform – considered a future game-changer for the mainstream mass production of fashion and apparel, a multi-billion-dollar market opportunity – constrained today by antiquated, analog, and polluting methods of production
  • Mass production of textile, traditionally off-shored, is going through an accelerated shift to near-shore production, significantly shorter production runs, lean-to-no inventory risk, and unlimited creativity and flexibility for designers and creators – all possible with Kornit’s new solution for mass production
  • Kornit will also unveil its Kornit Atlas MAX Poly – predicted to transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, suffering today from major limitations with mass customization of polyester

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx and textile production, announced today the Company will present the convergence of design, technology, and sustainable fashion at Kornit Fashion Week Tel Aviv 2022, April 3rd – 6th. Rewriting the rules for fashion and textiles, the transformative event will unveil vibrant runway collections together with game-changing industry-first product and technology introductions that bring digital production to the mainstream.

The four-day event is attended by some of the top designers, retailers, brands, fulfillers, and ecommerce players, in addition to global investors and press – and will include exclusive VIP experiences demonstrating the confluence of the design, technology, and fashion worlds. Together, these three elements are central to Kornit’s 4.0 strategy, bringing sustainable, on-demand fashion to the mainstream with end-to-end workflow solutions.

Kornit Fashion Week Tel Aviv 2022

Kornit Fashion Week features an immersive runway showcase produced by worldwide fashion icon, producer, director, and entrepreneur Motty Reif. The week follows successful Kornit events in 2021 across Los Angeles, New York, Milan, and Tel Aviv – displaying the creative freedom associated with sustainable, on-demand fashion fulfillment. Attendees will experience runway events showcasing designer creativity across a broad array of collections. These fascinating collections were created in just a few weeks, unlike typical fashion and textile production processes that take over six months.

Industry-First Introductions

Looking behind the scenes at Kornit Fashion Week, attendees will witness Kornit’s disruptive mass production technology in action. Unveiled for the first time, the Kornit Apollo direct-to-garment (DTG) system addresses accelerated post-pandemic market trends for streamlined supply chains and production nearshoring. Demonstrated at an exclusive VIP event, Kornit Apollo features the Company’s proven MAX technology offering the highest retail quality combined with full automation control and integrated smart curing processes, utilizing functionality from Lichtenau, Germany-based Tesoma (Kornit’s recently announced acquisition). The solution is the most comprehensive digital, single-step end-to-end system for nearshore short-and-medium-runs mass production and offers optimal TCO and highest output per operator. The result far surpasses performance of screen printing and analog techniques. With early customer engagements in the second half of 2022, the system will be available mid-2023.

Physical and Virtual Worlds

Kornit enables customers to exchange supply chain headaches and materials waste for unsurpassed creativity and a frictionless pixel-to-parcel-to-doorstep production experience. Supported by the KornitX workflow solution, customers have access to a scalable and modular ecosystem for on-demand decorated apparel and textiles. Supporting diverse supply chain models, the infrastructure-agnostic system enables on-demand, automated production, end-to-end from initial order to package delivery.