From the Sector

Reset
223 results
(c) ISKO
10.06.2022

ISKO™ purchased new weaving machines by Itema

With the purchase of the latest technology, iSAVER® by Itema, in weaving machines, ISKO pushes the envelope of technological performance and sustainability, making further progress in product and process efficiency.

This decision is an additional, important asset in ISKO’s journey towards a genuine Responsible Innovation™. It is part of other crucial investments made by the company, aimed at further reducing its environmental impact, among which stand out R-TWO™50+ – a new denim generation made with a minimum of 50% pre- and post-consumer recycled blend – and the Green Machine – a pioneering technology providing a 100% post-consumer recycling solution that fully separates and recycles cotton and polyester blends at scale.

After an intensive process, a selection was made where ISKO focuses on the development of technical solutions that enable greater resource savings and more sustainable production methods, always with the protection of workers at heart.

With the purchase of the latest technology, iSAVER® by Itema, in weaving machines, ISKO pushes the envelope of technological performance and sustainability, making further progress in product and process efficiency.

This decision is an additional, important asset in ISKO’s journey towards a genuine Responsible Innovation™. It is part of other crucial investments made by the company, aimed at further reducing its environmental impact, among which stand out R-TWO™50+ – a new denim generation made with a minimum of 50% pre- and post-consumer recycled blend – and the Green Machine – a pioneering technology providing a 100% post-consumer recycling solution that fully separates and recycles cotton and polyester blends at scale.

After an intensive process, a selection was made where ISKO focuses on the development of technical solutions that enable greater resource savings and more sustainable production methods, always with the protection of workers at heart.

As a result, ISKO’s Headquarters extend the company's long-term relationship with Itema,
strengthening the company’s position as the mill with one of the world’s largest denim capacities. The new rapier machines are enhanced by the iSAVER® technology, a breakthrough mechatronic innovation that eliminates the waste selvedge on the left side of the fabric, allowing for saving in energy and raw materials, cutting in half the cotton waste that typically results from the weft yarn. All types of ISKO’s innovative fabrics, with a multitude of different constructions and fiber mixtures, can now be produced using these advanced weaving technologies, with a special focus given to the R-TWO™ technology in terms of its sustainable credentials.

More information:
Isko Itema weaving machine
Source:

ISKO / Menabò Group srl

(c) Officina39
08.06.2022

Offina39 attends Denimsandjeans India

  • Officina39’s Trustainable™ collection FW 23: key innovation highlights.
  • The Trustainable™ collection FW 23 presents SMART 03 and Aqualess Fade

Officina39 is attending the fourth edition of Denimsandjeans India in Bangalore (8-9 June 2022). As the show displays the GREENABLE (green and comfortable) aspects of denim, Officina39 did want to have missed the opportunity to show its latest technologies included in the Trustainable™collection FW23.

For Officina39, “Trustainable” is a term that expresses the company’s approach based on honesty, transparency and social responsibility: this attitude once again characterizes the technologies that
have given shape to the Trustainable™ collection FW 23.

The latest technological addition to the line is represented by the new Ozone Booster SMART 03, which assures more final bluish indigo shades than the other boosters on the market, activating the
reaction of Ozone on indigo without any strong oxidizing agent. Better results, less aggressive bleaching.

  • Officina39’s Trustainable™ collection FW 23: key innovation highlights.
  • The Trustainable™ collection FW 23 presents SMART 03 and Aqualess Fade

Officina39 is attending the fourth edition of Denimsandjeans India in Bangalore (8-9 June 2022). As the show displays the GREENABLE (green and comfortable) aspects of denim, Officina39 did want to have missed the opportunity to show its latest technologies included in the Trustainable™collection FW23.

For Officina39, “Trustainable” is a term that expresses the company’s approach based on honesty, transparency and social responsibility: this attitude once again characterizes the technologies that
have given shape to the Trustainable™ collection FW 23.

The latest technological addition to the line is represented by the new Ozone Booster SMART 03, which assures more final bluish indigo shades than the other boosters on the market, activating the
reaction of Ozone on indigo without any strong oxidizing agent. Better results, less aggressive bleaching.

The new collection also marks the debut of Aqualess Fade, a technology that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which reduces resource consumption and environmental impact.

This newest innovation completes and integrates Aqualess Mission, a combination of technologies that allows garment laundry processes to reduce 75% of the water use. Until now, the process included three eco-friendly technologies: Novascraper Indigo, a laser finishing technique that adds a natural, vintage look to denim garments; OZ-ONE Powder, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look; and Aqualess Aged, a waterless compound to give denim abrasion effects. Specifically, this last revolutionizing product has recently marked an important achievement which adds to the company’s sustainable credentials: Officina39 in fact stands out as the first and only player to receive, for its Aqualess Aged, the DeniSafe® certification of enzyme product(s) by Novozymes for safe production and safe use through dry application.

More information:
Officina+39 Officina39
Source:

Officina39

RadiciGroup slashed greenhouse gas emissions by 70% (c) RadiciGroup
08.06.2022

RadiciGroup slashed greenhouse gas emissions by 70%

Setting concrete environmental sustainability objectives for abating direct greenhouse gas emissions and leveraging investments and state-of-the-art technology. This is the approach that has always guided RadiciGroup in operating its businesses with a wide range of products: chemical intermediates, polyamide polymers, high performance engineering polymers and advanced textile solutions.

Between 2011 and 2020, overall Group greenhouse gas emissions were cut by 70%, falling from about 700,000 metric tons per year of CO2 equivalent to 200,000 metric tons.  

Setting concrete environmental sustainability objectives for abating direct greenhouse gas emissions and leveraging investments and state-of-the-art technology. This is the approach that has always guided RadiciGroup in operating its businesses with a wide range of products: chemical intermediates, polyamide polymers, high performance engineering polymers and advanced textile solutions.

Between 2011 and 2020, overall Group greenhouse gas emissions were cut by 70%, falling from about 700,000 metric tons per year of CO2 equivalent to 200,000 metric tons.  

These results were largely achieved through the action implemented by the Group’s Specialty Chemicals Business Area at its plants in Novara, Italy, and in Germany, which are the heart of RadiciGroup’s chemicals business. Here the Group produces an essential intermediate for synthesizing polyamide 66, adipic acid, whose production process releases nitrous oxide as a by-product. Nitrous oxide in itself is not particularly problematic (in fact, it is used in the medical sector as an anaesthetic and in the food industry as a spray propellant, in cans of whipped cream, for instance), but, if it is released into the atmosphere, it has a much higher greenhouse gas effect than carbon dioxide.

At the Radici Chimica site in Novara, a multiyear investment budget of over EUR 10 million was dedicated to lowering these emissions through three important undertakings: in 2004, putting into operation a three catalyst bed reactor, designed and patented by the company, to decompose nitrous oxide into nitrogen and oxygen, the two elements it is composed of, thus making it innocuous for the atmosphere; in 2013, installing an EnviNOx plant to decrease the release of nitrous oxide formed in the production of nitric acid, and, in 2021, a further improvement in the emissions abatement system associated with nitric acid production.

Since activating the last plant just 9 months ago, more than 35,000 metric tons of CO2 equivalent have been cut. All the above-mentioned actions have enabled Radici Chimica Novara to record a nitrous oxide emissions level less than 10 ppm, a value close to zero.

Source:

RadiciGroup

Photo: Texaid
07.06.2022

TEXAID enables Textile-to-Textile Recycling

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

Collaboration enables recycling
After two years of research, product development, and most important, building partnerships in the value chain, TEXAID has been able to develop a fabric made of 100 % recycled fiber in close collaboration with our value chain partners.

The fabric is a blend of 50 % post-consumer textile waste that TEXAID has collected in Germany and Switzerland. White cotton textiles which cannot be worn, have been sorted out in a sorting facility in Apolda, Germany. The other 50% is made from ocean-bound plastic waste which is plastic with a high risk of entering the ocean which has been saved and recycled by Unifi. The fabric and bag have been produced in Italy. The cotton material has been shredded by Marchi & Fildi in Biella, IT, who then spun the recycled cotton and recycled polyester fibers into a yarn. This yarn has been woven into a fabric by Tessitura Casoni.T.F.C.

Through this proof of concept, it has been showcased that making fabrics of 100 % recycled content and with 50 % of post-consumer textiles is possible. TEXAID is looking for strong industry partners to push high-value textile to textile recycling technologies in joint projects like these.

More information:
Texaid Recycling
Source:

Texaid

02.06.2022

Suominen launches a nonwoven made with recycled paper

Suominen further strengthens its position as the frontrunner in sustainable nonwovens by launching HYDRASPUN® Circula, the market’s first ever nonwoven made with recycled paper.

HYDRASPUN® Circula is biodegradable, plastic-free and can be used in multiple applications. The product was created in cooperation with Codi Group, one of Europe’s leading wet wipe producers. Drawing from both parties’ industry expertise, the new product offers a variety of applications to meet consumers’ daily needs.

“It is important for Suominen to continuously develop new sustainable products to be able to offer even more choices to our customers. HYDRASPUN® Circula is a perfect example of how we can develop our nonwovens with innovations and more sustainable raw materials. HYDRASPUN® Circula is also a proof of great product development towards circular economy without compromising excellent quality and functionalities,” says Johanna Kivistö, Manager, Category Management, Europe.

Suominen further strengthens its position as the frontrunner in sustainable nonwovens by launching HYDRASPUN® Circula, the market’s first ever nonwoven made with recycled paper.

HYDRASPUN® Circula is biodegradable, plastic-free and can be used in multiple applications. The product was created in cooperation with Codi Group, one of Europe’s leading wet wipe producers. Drawing from both parties’ industry expertise, the new product offers a variety of applications to meet consumers’ daily needs.

“It is important for Suominen to continuously develop new sustainable products to be able to offer even more choices to our customers. HYDRASPUN® Circula is a perfect example of how we can develop our nonwovens with innovations and more sustainable raw materials. HYDRASPUN® Circula is also a proof of great product development towards circular economy without compromising excellent quality and functionalities,” says Johanna Kivistö, Manager, Category Management, Europe.

More information:
Suominen nonwovens recycled paper
Source:

Suominen

Albini joins C.L.A.S.S. Material Hub (c) Albini Group
Off The Grain, one of the latest examples of responsible innovation by ALBINI_next
18.05.2022

Albini joins C.L.A.S.S. Material Hub

Albini Group, historic manufacturer of high-end shirting fabrics, meets C.L.A.S.S. Eco Hub, international platform for the promotion and development of innovative and sustainable textiles. Two groundbreaking companies joining forces in the name of ethical and technological development through the C.L.A.S.S. Material Hub, the section dedicated to fibers, threads, yarns and fabrics that are changing the fashion and textile industry.  The values in which Albini Group believes and the strong sensitivity to environmental issues have led the company to also address the issue of the risk of toxic and harmful chemicals in a systemic way, integrating into the production cycles activities and controls aimed at gradually eliminating their presence, with the clear objective of protecting man and the environment.

Albini Group, historic manufacturer of high-end shirting fabrics, meets C.L.A.S.S. Eco Hub, international platform for the promotion and development of innovative and sustainable textiles. Two groundbreaking companies joining forces in the name of ethical and technological development through the C.L.A.S.S. Material Hub, the section dedicated to fibers, threads, yarns and fabrics that are changing the fashion and textile industry.  The values in which Albini Group believes and the strong sensitivity to environmental issues have led the company to also address the issue of the risk of toxic and harmful chemicals in a systemic way, integrating into the production cycles activities and controls aimed at gradually eliminating their presence, with the clear objective of protecting man and the environment.

Three main research areas - innovative fibers and yarns, sustainable dyes and green chemistry - united by the task of transferring cutting-edge technologies through open innovation. Among the new projects presented is "Off the Grain," born from the collaboration with Riso Gallo, a leading rice producer in Italy. It is a new type of dye derived from the processing of a particular variety of black rice: the boiling water of the rice, which can no longer be used for the food industry, is transformed into a natural dye, resulting in significant water savings during the dyeing process.

"Grounded Indigo" is a natural textile dyestuff, born from the search for dyeing practices that are more responsible to people and the environment. For this project, ALBINI_next chose to collaborate with Stony Creek Colors, an American producer of the world's only 100% plant-based indigo that is USDA BioPreferred certified.

The third project, called "HempFeel," is an innovative hemp oil-based finishing, tipically used for cosmetic products. ALBINI_next was the first company to apply it to fabrics of different weights, compositions and structures. HempFeel replaces silicones usually used in finishing, thus reducing the release of microplastics and giving fabrics a soft and durable hand.

"When discussing values related to creativity, next-generation production and commitment to ethics and traceability, Albini is an extremely important point of reference." says Giusy Bettoni, founder and CEO of C.L.A.S.S. "This is why we are delighted with its inclusion within our Material Hub, alongside its colleagues of the responsible innovation movement. Follow us on this new common path. Next- generation solutions and nice surprises will not be missed."

(c) Messe Frankfurt (HK) Ltd.
17.05.2022

Cinte Techtextil China to address personal hygiene and sustainability demands

With global consumers becoming more conscious about personal hygiene and environmental protection, exhibitors at Cinte Techtexil China will spotlight materials and technologies for products that respond to these trends. The fair will probe into the associated growth opportunities as the country is one of the leading markets for nonwovens and technical textiles. The event will be held from 6 – 8 September at the Shanghai New International Expo Centre.

The technical textiles and nonwovens industries, the latter notably, are significantly expanding amid the pandemic. A recent forecast[1] predicts that the global polypropylene nonwoven fabric market will continue to rise at a CAGR of 6.7%, reaching USD 39.23 billion by 2028. The anticipated growth is bolstered by demands in end-use industries such as sanitation, medical, automotive and more. In 2020, Asia Pacific was named the largest regional market in the world and is expected to grow significantly over the forecasted period.

With global consumers becoming more conscious about personal hygiene and environmental protection, exhibitors at Cinte Techtexil China will spotlight materials and technologies for products that respond to these trends. The fair will probe into the associated growth opportunities as the country is one of the leading markets for nonwovens and technical textiles. The event will be held from 6 – 8 September at the Shanghai New International Expo Centre.

The technical textiles and nonwovens industries, the latter notably, are significantly expanding amid the pandemic. A recent forecast[1] predicts that the global polypropylene nonwoven fabric market will continue to rise at a CAGR of 6.7%, reaching USD 39.23 billion by 2028. The anticipated growth is bolstered by demands in end-use industries such as sanitation, medical, automotive and more. In 2020, Asia Pacific was named the largest regional market in the world and is expected to grow significantly over the forecasted period.

The prediction reaffirms the growth prospects of nonwovens. In this regard, industry players expressed much optimism about associated future opportunities during Cinte Techtextil China last year. “The field of nonwovens is poised for a positive growth as the awareness of personal hygiene and pandemic prevention sustains in the domestic market,” commented Mr James Gao, Head of Marketing and Textile Technologies, Uster Technologies (China) Co Ltd. He added: “We decided to join the fair and showcase our new launches as we remain confident in the future development of the industry, especially since China is dominating the global scene.”

Going green is the way forward
Turning to yarns and fibres, the sector is shifting to greener and smarter production that echoes the trend towards sustainability that is gaining considerable traction across the globe. Meanwhile in China, this movement was observed by many exhibitors at the 2021 edition, including Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, the Chinese subsidiary of the Fil Man Made Group. He mentioned: “The market is paying more attention to environmental protection, and we receive enquiries about special yarns for this every day. We focus on technical yarns for filtration as well as anti-bacterial properties, which are very important for the environment. The potential here in China is incredible and this is a big opportunity for everybody.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span across a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw material providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

12.05.2022

C.L.A.S.S. Eco Hub launches sustainable Training

C.L.A.S.S. has taken another strategic step with Training, an educational offer made of three moments aimed at sharing valuable and practical information concerning three main areas of sustainable development. Training will be adding value to the Smart Academy offer by C.L.A.S.S., a program of events and conferences, lectures or customized training services, united by an important goal: to educate, raise awareness and inspire professionals, students and even consumers with an eye to the values of responsibility.

There are three trainings offered:

C.L.A.S.S. has taken another strategic step with Training, an educational offer made of three moments aimed at sharing valuable and practical information concerning three main areas of sustainable development. Training will be adding value to the Smart Academy offer by C.L.A.S.S., a program of events and conferences, lectures or customized training services, united by an important goal: to educate, raise awareness and inspire professionals, students and even consumers with an eye to the values of responsibility.

There are three trainings offered:

  1. Introduction to a new generation of fashion
    C.L.A.S.S. team will introduce and explain the new generation of value-driven fashion where the fusion of design, innovation, communication and responsibility shapes an informed and competitive business, able to play both at an economic and social level. Since 2007, at the base of our philosophy is a formula: Virtuous Fashion, the one with the capital F, is the product of an integration of design (D), innovation (I), sustainability (S) and communication (C). In brief: F = D x I x S x C.
     
  2. Introduction to Smart Ingredients
    What is a responsible material? How to source responsibly? Which are the latest smart ingredients that can enrich with new generation fashion collections?
    During the session participant will be guided through materials available in the market, and will have the chance to have an “informed background“ of each one of the materials' journey. Conscious Choices can be made ONLY IF we have all the true full information in our hands. This training informd participant to make the best informed choice for their objectives. A simple but facts driven introduction to the key available innovative and sustainable materials: naturals, transformed and innovative where traceability, transparency, innovation, performance, responsible measurements are leading both the storymaking and the storytelling of each one of them.
     
  3. Introduction to Sustainability Report
    The preparation of the company's sustainability report is a fundamental moment to define objectives, identify improvement actions, and measure its environmental and social impact. It is a job that involves the entire company team, which can transform the report into an opportunity for growth.
    The package offered by C.L.A.S.S., in collaboration with Silvia Gambi, sustainable fashion journalist and podcaster of Solo Moda Sostenibile, combines training with personalized consulting with a coaching action to guide the company team in the preparation of its sustainability report, offering the necessary support to create a document that tells about the company, its values, its commitment and also its objectives.
Source:

C.L.A.S.S.

10.05.2022

Stahl releases annual ESG report with focus on sustainability and transparency

Stahl, an active proponent of responsible chemistry, has published its 2021 Environment, Social, and Governance (ESG) Report. The report outlines the company’s sustainable development ambitions and its achievements over the year. It also features Stahl’s ambitious climate mitigation targets for 2030, such as the transition to more renewable feedstocks.

Stahl, an active proponent of responsible chemistry, has published its 2021 Environment, Social, and Governance (ESG) Report. The report outlines the company’s sustainable development ambitions and its achievements over the year. It also features Stahl’s ambitious climate mitigation targets for 2030, such as the transition to more renewable feedstocks.

The 2021 Stahl ESG Report is a cornerstone of Stahl’s commitment to reporting transparently on its progress toward a more sustainable chemicals value chain. This acknowledges the important role that industry must play in tackling climate change while enabling a higher quality of life for more people. A key focal point of the new report is a progress update on Stahl’s ESG Roadmap. Introduced last year, this ten-year plan outlines the company’s ESG commitments and targets for 2023 and 2030.
 
Climate action
Stahl is focused on mitigating climate change by reducing greenhouse gas (GHG) emissions from all activities over which it has influence. This includes investing in renewable energy and process efficiencies to lower the GHG emissions caused directly by Stahl’s own operations and the energy used to power them. On this point, progress was made toward the 2023 and 2030 targets in 2021, including a reduction in Scope 1 and 2 CO2 emissions of 15%. Also covered are Stahl’s indirect value-chain impacts, for example, from the raw materials it buys. Looking beyond Stahl’s direct environmental impacts and fostering greater supply-chain transparency will be vital for tackling emissions on a wider scale.

Creating responsible chemistry, together
In 2021, advances were made regarding the company’s diversity and safety targets, which are areas of continuous improvement. Stahl is committed to ensuring a safe working environment, as well as nurturing a diverse and inclusive workplace to continuously improve employee skills.

EcoVadis Gold rating
Fostering ethical behavior through exemplary leadership and governance is key to Stahl’s ambitions. Achieving the EcoVadis Gold rating was an important milestone in this respect. This well-established award reflects the company’s ongoing commitment to supply chain transparency and working with partners to improve the sustainability of its products and operations.

Source:

Stahl Holdings B.V.

(c) Officina39
10.05.2022

Officina39 returns to Bangladesh Denim Expo with latest sustainable developments

Officina39 will attend the Bangladesh Denim Expo in Dhaka on 10-11 May, a new edition after a two-year break, characterized by a focus on sustainability and the central theme "Beyond Business".

Officina39 has been committed for years to the reconversion of the sector’s technologies to an environmental point of view: this attitude is expressed in its latest Trustainable™ collection FW 23, based on the approach of honesty, transparency and social responsibility that drives the company. Officina39 will present Aqualess Fade, a technology just recently presented at Kingpins that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which is reducing resource consumption and environmental impact.

Officina39 will attend the Bangladesh Denim Expo in Dhaka on 10-11 May, a new edition after a two-year break, characterized by a focus on sustainability and the central theme "Beyond Business".

Officina39 has been committed for years to the reconversion of the sector’s technologies to an environmental point of view: this attitude is expressed in its latest Trustainable™ collection FW 23, based on the approach of honesty, transparency and social responsibility that drives the company. Officina39 will present Aqualess Fade, a technology just recently presented at Kingpins that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which is reducing resource consumption and environmental impact.

Aqualess Fade completes and integrates Aqualess Mission, a combination of technologies that allows garment laundry processes to reduce 75% of the water use. Until now, the process included three eco-friendly technologies: Novascraper Indigo, a laser finishing technique that adds a natural, vintage look to denim garments; OZ-ONE Powder, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look; and Aqualess Aged, a waterless compound to give denim abrasion effects. Specifically, this last revolutionizing product has recently marked an important achievement which adds to the company’s sustainable credentials: Officina39 received, for its Aqualess Aged, the DeniSafe® certification of enzyme product(s) by Novozymes for safe production and safe use through dry application.

Bangladesh Denim Expo is also ideal for presenting the results of The Circle Book 2, the second chapter of a collective project gathering ten high-profile players of the textile supply chain. Officina39’s Recycrom™ technology and the expertise of Meidea, Lenzing, Tejidos Rojo, Calik Denim, Ribbontex, Spring85, Dr. Bock Industries, Crafil and RGT have merged together on the development of CULTURE.IN, a circular capsule collection transparently made from recycled and degradable materials: a practical demonstration of how the fashion industry can improve considering social and environmental impacts and goals.

Source:

Officina39 / Menabò Group srl

28.04.2022

Policy Hub: Media Masterclass on Transparency in the Apparel & Footwear Industry

Policymakers and industry stakeholders recently convened for an enlightening conversation on the challenges that the apparel and footwear industry is facing regarding the communication of reliable information to consumers and the drastic change that is needed through smart regulation. Hosted by the Policy Hub, Circularity for Apparel and Footwear, and Global Fashion Agenda, the non-profit that fosters industry collaboration on sustainability to drive impact, the masterclass presented media with views on the steps that must be taken to prevent greenwashing and empower consumers.

The Policy Hub - Circularity for Apparel and Footwear – represents more than 700 brands, retailers, manufacturers, and other stakeholders from across the globe, covering more than 50 per cent of the apparel and footwear sector. During the masterclass, Baptiste Carrière-Pradal, Chair, Policy Hub, presented its position on the EU Consumer Empowerment Initiative and the importance of Substantiating Green Claims through the new standardised methodology of the Product Environmental Footprint (PEF).

Policymakers and industry stakeholders recently convened for an enlightening conversation on the challenges that the apparel and footwear industry is facing regarding the communication of reliable information to consumers and the drastic change that is needed through smart regulation. Hosted by the Policy Hub, Circularity for Apparel and Footwear, and Global Fashion Agenda, the non-profit that fosters industry collaboration on sustainability to drive impact, the masterclass presented media with views on the steps that must be taken to prevent greenwashing and empower consumers.

The Policy Hub - Circularity for Apparel and Footwear – represents more than 700 brands, retailers, manufacturers, and other stakeholders from across the globe, covering more than 50 per cent of the apparel and footwear sector. During the masterclass, Baptiste Carrière-Pradal, Chair, Policy Hub, presented its position on the EU Consumer Empowerment Initiative and the importance of Substantiating Green Claims through the new standardised methodology of the Product Environmental Footprint (PEF).

A first panel was kicked off by the European Commission representative who provided attendees with an overview of what is new about the PEFCRs for apparel and footwear. That led to an interesting and informed discussion with brands and other organisations which showed both the benefits of the PEF and the improvements needed in its methodology for it to fully reflect the complexity of the industry.

Overall, discussions showed the need for the topic to be addressed globally, apply a clear solid method to measure the environmental impact and for much more stringent legislation to regulate and ban greenwashing. As put by Baptiste Carriere-Pradal, Chair of the Policy Hub: “There will be challenges, the journey is long but now is the time for clear and ambitious regulation that will help us change the industry.”

You can watch the Media Masterclass here.

Source:

Global Fashion Agenda

(c) ChemSec, report Not Quite 100%
28.04.2022

ChemSec' Study: Consumer brands demand clarity on recycled plastics

A new interview study from NGO ChemSec shows that there is a gap between supply and demand when it comes to recycled materials, causing confusion and bottlenecks. Among other things, suppliers go out of their way using elaborate trade schemes to reach the coveted ”100% recycled” tag, which – it turns out – is not that important to consumer product brands. Far more crucial aspects, according to several major B2C companies, are:

  • Honest communication towards customers
  • Comprehensive information from suppliers
  • Clear standards for recycled material

These are some of the conclusions from NGO ChemSec’s survey and interview study with 26 highly well-known consumer product brands. All brands responded to a survey concerning their current plastic use, as well as their needs, expectations and challenges regarding using more recycled material, to enable the shift to a circular economy for plastics.

Ten of the brands then participated in in-depth interviews on the same topics:, Essity, H&M, IKEA, Inditex , Lego, Mars,  SC Johnson, Tarkett, Unilever and Walgreens Boots Alliance.

A new interview study from NGO ChemSec shows that there is a gap between supply and demand when it comes to recycled materials, causing confusion and bottlenecks. Among other things, suppliers go out of their way using elaborate trade schemes to reach the coveted ”100% recycled” tag, which – it turns out – is not that important to consumer product brands. Far more crucial aspects, according to several major B2C companies, are:

  • Honest communication towards customers
  • Comprehensive information from suppliers
  • Clear standards for recycled material

These are some of the conclusions from NGO ChemSec’s survey and interview study with 26 highly well-known consumer product brands. All brands responded to a survey concerning their current plastic use, as well as their needs, expectations and challenges regarding using more recycled material, to enable the shift to a circular economy for plastics.

Ten of the brands then participated in in-depth interviews on the same topics:, Essity, H&M, IKEA, Inditex , Lego, Mars,  SC Johnson, Tarkett, Unilever and Walgreens Boots Alliance.

Is non-mechanical recycling the answer?
Only about ten percent of all discarded plastics is recycled today, which is of course not nearly enough to achieve a circular plastics economy. Despite ambitions and initiatives to reduce plastics use – replacing the materials with other, more sustainable ones – the “plastic tap” is not expected to be turned off anytime soon. Quite the opposite, which makes raising the recycling rates more important than ever.

Although commercially viable, traditional (mechanical) recycling is afflicted with severe flaws, such as legacy chemicals, quality and functionality issues, as well as the lack of clean and sorted waste streams. The brands cited quality and functionality issues as the main obstacles for using more recycled material in their products.

This opens up for non-mechanical recycling, sometimes referred to as chemical recycling, where the plastic is either dissolved or broken down into smaller building blocks. Harmful additives and other hazardous chemicals can be removed in the process, and a material comparable to virgin plastic can be achieved – at least in theory.

So far, however, non-mechanical recycling technologies are costly, energy-intensive, and often require the addition of a great deal of virgin plastic to work – the very material that needs to be phased out.

The chain of custody models needs to be detangled
Apart from these production issues, there is a wide range of chain of custody models surrounding non-mechanical recycling, including mass balance and book & claim, which enable trade of credits or certificates for recycled material.

This cuts the physical connection between input and output, making it possible for a supplier to sell a material as “100% recycled”, when the actual recycled content could be zero.

This is a major issue for the brands ChemSec has spoken to, who value honest and correct communication towards customers. It turns out, perhaps somewhat surprisingly, that being able to slap a “made from 100% recycled plastic” label on a product is not all that important to brands.

To the brands, a physical connection between input (the discarded plastic waste headed for recycling) and output (the product at least partially made from recycled plastics) is far more important.

A physical connection, along with correct and adequate information from suppliers, as well as clearer standards and guidelines than what is available today, is what brands require to increase the use of recycled material and move us closer to a circular economy for plastics.

More information:
ChemSec plastics Recycling
Source:

ChemSec

(c) INDA
27.04.2022

World of Wipes® International Conference 2022 addresses changing role of wipes

With the wipes sector adapting to demands for products that protect consumers from COVID-related risks, industry experts will present the latest insights for moving forward post-pandemic at the World of Wipes® (WOW) International Conference.   

The shift from “clean” to “safe” in the world of wipes will be among the key topics thought-leading speakers will address at the in-person event, June 27-30, at the Marriott Marquis in Chicago.

The information-packed program will tackle timely topics to support decision making on the following key themes: Circular and Sustainable Wipes, Supply Chain Challenges in Wipes, Nonwoven Substrates for More Sustainable Wipes, Trends in the Wipes Market and Among Consumers, Disinfection Concerns and New Technologies, Sustainable Wipe Packaging Trends and Developments in Flushability Issues.

World of Wipes Session Highlights

With the wipes sector adapting to demands for products that protect consumers from COVID-related risks, industry experts will present the latest insights for moving forward post-pandemic at the World of Wipes® (WOW) International Conference.   

The shift from “clean” to “safe” in the world of wipes will be among the key topics thought-leading speakers will address at the in-person event, June 27-30, at the Marriott Marquis in Chicago.

The information-packed program will tackle timely topics to support decision making on the following key themes: Circular and Sustainable Wipes, Supply Chain Challenges in Wipes, Nonwoven Substrates for More Sustainable Wipes, Trends in the Wipes Market and Among Consumers, Disinfection Concerns and New Technologies, Sustainable Wipe Packaging Trends and Developments in Flushability Issues.

World of Wipes Session Highlights

  • Lifestyle Shifts and the World of Wipes: Meeting the Changing Consumer Demand to Secure Growth – Liying Quian, Research Analyst, Euromonitor International will explore personal and beauty care trends based on consumer surveys that could shape wipes’ long-term performance
  • The Supply Chain – Import Pressures Versus Domestic Manufacturing – Jacob Smith, Director, Supply Chain and Customer Care, Health, Hygiene, and Specialties Division, North America, Berry Global will share his expertise and experience on how COVID-19 has impacted domestic production and international sourcing of wipes
  • Packaging Sustainability:  A Global Perspective – David Clark, Vice President of Sustainability, Amcor will look at how consumer brands, retailers and others are responding to consumer demand for more sustainable packaging and discuss progress and risks in the U.S. and other countries
  • How Sustainable are You Willing to Be? New Technology to Support Use of Recycled Fiber Sources – Richard Knowlson, Principal, RPK Consulting will tackle the question of how new manufacturing technology can help produce more sustainable nonwoven substrates in today’s price-sensitive environment
  • Dead Turtle Logos – What We Know So Far in the EU – Heidi Beatty, Chief Executive Officer, Crown Abbey, LLC will share the latest learnings on the European Union’s Single Use Plastic Directive and the impact of the plastic-free packaging logos on consumer attitudes
  • Challenges and Pitfalls of Scaling Up a Waste Cleaning Wipes Collection and Recycle System – Sergio Barbarino, Research Fellow, Fabric and Home Care Open Innovation, Procter & Gamble Distribution Company Europe will look at cleaning wipes’ potential to be recycled and become a convenient pioneering experimental platform
  • Case Study: Surface Disinfection Incompatibility with Medical Devices Creates Potential Patient Risks – Caroline Etland, Ph.D., RN. CNS, ACHPN, Associate Professor, Hahn School of Nursing, BINR, University of San Diego will share real examples of the issues healthcare facilities face with surface disinfection incompatibility that make cleaning and disinfection a major challenge

In addition to the conference program, WOW 2022 also features two nights of tabletop displays and receptions; the presentation of the World of Wipes Innovation Award® and the INDA Lifetime Technical Achievement Award; and 11 hours of face-to-face engagement during a welcome reception, first-time attendee mentorship program, and breakfast connections. The event kicks off with the WIPES Academy, a 1.5-day value-added training opportunity on June 27-28.

(c) Officina39
22.04.2022

Officina39 and Adriana Galijasevic’s Cocircular Lab present “Circular Explorations: Recipe for Change”

This collaborative and educational project showcases the use of waste as a resource and prolonging the life of the garment through color. It came to life thanks to key brands who donated items that were then transformed by Officina39’s Recycrom™ applications into a renewed head-to-toe look that was then displayed as an art installation.

What’s the Recipe for change? For Officina39 and Adriana Galijasevic’s Cocircular Lab, this question gives shape to the collaborative and educational project Circular Explorations, specially presented at Amsterdam Denim Days Festival on April 22-23.

Sharing ground values and a common view on the fashion of tomorrow, Officina39, Italian based Chemistry plus Creativity company for the textile sector, joined hands with Adriana Galijasevic’s Cocircular Lab and influential brands to celebrate the importance of an ongoing commitment towards circularity.

This collaborative and educational project showcases the use of waste as a resource and prolonging the life of the garment through color. It came to life thanks to key brands who donated items that were then transformed by Officina39’s Recycrom™ applications into a renewed head-to-toe look that was then displayed as an art installation.

What’s the Recipe for change? For Officina39 and Adriana Galijasevic’s Cocircular Lab, this question gives shape to the collaborative and educational project Circular Explorations, specially presented at Amsterdam Denim Days Festival on April 22-23.

Sharing ground values and a common view on the fashion of tomorrow, Officina39, Italian based Chemistry plus Creativity company for the textile sector, joined hands with Adriana Galijasevic’s Cocircular Lab and influential brands to celebrate the importance of an ongoing commitment towards circularity.

Several donated items – overstock, second-grade production or damaged, unsold pieces – were updated with newly developed applications made with Officina39’s Recycrom™, the one-of-a-kind, patented dyestuffs range made from textile waste. This Circular Explorations capsule is displayed at Denim Days Festival as an art installation, not only to dress people but also to get them acquainted with circularity because they are an important player in closing the loop.

The Recipe for change that emerges from this color research is based on important values and keywords:

  • Consciousness – awareness of oneself and one's surroundings
  • Courage – the mental or moral strength to venture, persevere, and withstand danger, fear, or difficulty.
  • Creativity – the power to imagine and produce new possibilities.
  • Connection – a relationship in which a person or thing is linked or associated with something else, the act or state of connecting.
  • Collaboration – the act of working together for a common goal.

Combined together, they produce CHANGE, which is a driving force for a better tomorrow.

This collaborative and innovative project that addresses circularity is also in direct support of United Nations Sustainable Development Goals, in particular number 12-Responsible Consumption and Production, number 9-Industry innovation & Infrastructure and number 17-Partnership for the Goals.

Source:

Officina39 / Menabò

(c) Sicomin
22.04.2022

Sicomin: Upcycled Carbon Fibre from Airbus with GreenPoxy to create Surfboards

Sicomin has confirmed that eco-surfboard specialist NOTOX will use GreenPoxy 56 in its latest line of R-CARBON boards. The new NOTOX R-CARBON boards are the first to use 100% upcycled carbon fibre fabrics recovered from a production waste stream at Airbus.

NOTOX, founded in 2006 and based in Basque, France, has partnered with Sicomin to use GreenPoxy bio-resins in several earlier flax, cork, and bamboo reinforced boards. In a quest to now produce the most sustainable carbon fibre reinforced boards possible, NOTOX has signed a formal agreement with Airbus Nantes to purchase defective carbon fabrics that were destined for landfill.

Sicomin has confirmed that eco-surfboard specialist NOTOX will use GreenPoxy 56 in its latest line of R-CARBON boards. The new NOTOX R-CARBON boards are the first to use 100% upcycled carbon fibre fabrics recovered from a production waste stream at Airbus.

NOTOX, founded in 2006 and based in Basque, France, has partnered with Sicomin to use GreenPoxy bio-resins in several earlier flax, cork, and bamboo reinforced boards. In a quest to now produce the most sustainable carbon fibre reinforced boards possible, NOTOX has signed a formal agreement with Airbus Nantes to purchase defective carbon fabrics that were destined for landfill.

The new NOTOX technology gives a second life to Airbus carbon fabrics that are declared unusable for aerospace applications due to short roll lengths, an inability to be pre-formed, or other defects. The upcycled materials are combined with Sicomin GreenPoxy 56 and Surf Clear hardener, producing an extremely clear, high gloss laminate with high mechanical properties. NOTOX use a precisely controlled wet lamination process with vacuum bag consolidation to wet out the upcycled woven carbon fabrics and minimise resin consumption in the manufacturing process.

In addition to selecting a high bio-content resin – GreenPoxy 56 derives 56% of its carbon content from plant sources – NOTOX has also sourced the most sustainable carbon fibre fabrics. Full life cycle analysis by NOTOX has shown that using waste carbon fabrics from Airbus is significantly more energy efficient than using other recycled short fibre carbon, confirming the importance of upcycling this key raw material.

More information:
Sicomin carbon fibers Upcycling NOTOX
Source:

Sicomin / 100% Marketing

(c) Officina+39
20.04.2022

Officina39 presents Trustainable™ collection FW 23 at Kingpins

Chemistry plus creativity” is Officina39’s new tagline expressing the most important values at the core of the company’s approach, founded on a deep understanding of sustainability. Embracing the “plus” that used to feature as part of the Officina39 logo, it now takes the shape of a true formula of innovation that echoes throughout the renovated brand look that the company is introducing for the first time at Kingpins.

The latest addition to the Trustainable™ collection is Aqualess Fade, a technology that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which is reducing resource consumption and environmental impact. This innovation completes and integrates Aqualess Mission, a combination of technologies that allows garment laundry processes to reduce 75% of the water use.

Chemistry plus creativity” is Officina39’s new tagline expressing the most important values at the core of the company’s approach, founded on a deep understanding of sustainability. Embracing the “plus” that used to feature as part of the Officina39 logo, it now takes the shape of a true formula of innovation that echoes throughout the renovated brand look that the company is introducing for the first time at Kingpins.

The latest addition to the Trustainable™ collection is Aqualess Fade, a technology that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which is reducing resource consumption and environmental impact. This innovation completes and integrates Aqualess Mission, a combination of technologies that allows garment laundry processes to reduce 75% of the water use.

Traditional systems usually use about 52 liters of water for a pair of jeans, while Officina39’s cutting-edge technology employs only 12.5 liters without affecting the quality of the final product. Until now, the process included three eco-friendly technologies: Novascraper Indigo, a laser finishing technique that adds a natural, vintage look to denim garments; OZ-ONE Powder, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look; and Aqualess Aged, a waterless compound to give denim abrasion effects.

“In our field, the word “less” is to be found pretty much everywhere you look: less water, less energy, less impact and the list goes on. So I asked myself if we could work on implementing the word “plus” in this collection.” stated Stefano Parrotta, Officina39 Technical Manager. “And the answer, of course, was yes: we thought of all the ways in which the idea of more (plus) best represents what we do – more passion, more creativity, more collaboration, more inspiration, more Officina39. I think it is important to look for what the industry needs more of and the word “plus” perfectly embodies that!”

Source:

Officina+39

Photo: Pixabay
30.03.2022

EURATEX comments “Strategy for Sustainable Textile” calling for a realistic implementation

Today, March 30, the European Commission released its long-awaited Strategy for Sustainable Textile, with the ambition to move the sector towards the path of sustainability. EURATEX welcomes the EU ambitions to act on sustainable textiles and investments, in order to change how textiles are made, chosen and recovered, but calls for a smart and realistic implementation. Many European companies have already chosen this path, therefore the strategy should support them in this process, especially considering today’s energy crisis.

The strategy recognises the strategic importance of textiles, which are not only used as apparel or furniture, but applied in cars, medical equipment, agriculture, etc. It acknowledges the European Industry pro-active initiatives to tackle microplastics, to solve challenges of market surveillance and the skills needs. More cooperation is needed for re-use and recycling of textiles and to set up an EU market for secondary raw materials. On this last point, EURATEX ReHubs initiative is developing proposals to size EPR potential, to transform waste into value, and create a new capacity and jobs.

Today, March 30, the European Commission released its long-awaited Strategy for Sustainable Textile, with the ambition to move the sector towards the path of sustainability. EURATEX welcomes the EU ambitions to act on sustainable textiles and investments, in order to change how textiles are made, chosen and recovered, but calls for a smart and realistic implementation. Many European companies have already chosen this path, therefore the strategy should support them in this process, especially considering today’s energy crisis.

The strategy recognises the strategic importance of textiles, which are not only used as apparel or furniture, but applied in cars, medical equipment, agriculture, etc. It acknowledges the European Industry pro-active initiatives to tackle microplastics, to solve challenges of market surveillance and the skills needs. More cooperation is needed for re-use and recycling of textiles and to set up an EU market for secondary raw materials. On this last point, EURATEX ReHubs initiative is developing proposals to size EPR potential, to transform waste into value, and create a new capacity and jobs.

The proposed “transition pathways”, which will translate the strategy into action, will be critical in this respect: how will these sustainability targets be reached, what will the cost for SMEs be, how can companies be supported in that green transition, what about the impact on global competitiveness? These are essential questions to be addressed in the coming months.
The Textile strategy is part of much broader package, including as many as 16 new legislative actions and other policies which will directly impact on textile value chain. In particular the Sustainable Product Initiative Regulation released on March, 30 includes game-changing provisions on Digital Product Passport, Eco-Design, SMEs and Green Public Procurement.  The Regulation has an overwhelming ambition and, to be realistic, it would require a new way of joint working between institutions and business, and which builds on lessons learned on data flow across value chains, interoperability, conformity assessment and effective measures to support SMEs.

If wrongly implemented, such an unprecedented wave may cause a complete collapse of the European textile value chain under the burden of restrictions, requirements, costs and unlevel playing field. On the contrary, the changes ahead can boom the entire textile ecosystem and create a model of successful green and digital transition in manufacturing, which starts in Europe and expands globally.

Already in 2019, EURATEX asked policy makers to work together and remove barriers to circular economy, solve the market surveillance paradox in which laws are made but not checked, and to help create scale economies to make sustainable textiles affordable, hence the norm.

For example, there are 28 billion products circulating per year in EU, which is an impressive task for market surveillance authorities including customs. EURATEX has been stressing non-sufficient market surveillance and it is actively working on solutions for a fair and effective market surveillance of textile products through Reach4Textiles. EURATEX very much welcomes that the European Commission recognizes our work and the need for market surveillance by establishing more harmonised efforts in the EU.

EURATEX also welcomes the establishment of the Digital Product Passport. It has a high potential to improve every step in the textile value chain, from design and manufacturing to recycling and purchasing. At the same time, EURATEX calls the co-legislators to take into account the role of SME’s in this transition and to put forward pragmatic initiatives, supporting SME’s across the EU in a systematic approach.

Alberto Paccanelli, EURATEX President, concludes: EURATEX calls for true cooperation with all policy makers and other stakeholders across the value chains to advise, pressure-test and use this opportunity for a successful transition. Our ambition must be to reconcile sustainability, resilience and competitiveness; we know it can be done”.

Source:

EURATEX

TEXHIBITION Istanbul Fabric and Textil Accessories Fair
Texhibition 2022
30.03.2022

TEXHIBITION Istanbul Fabric and Textil Accessories Fair

  • March 16-18, 2022, Istanbul Expo Center
  • Successful start of Texhibition, Istanbul Fabric and Textile Accessories Fair with over 10,000 visitors from 63 countries
  • More than 160 exhibitors presented fabrics, yarns and accessories on approx. 5,000 square meters in the Istanbul Expo Center
  • Intensive order activity in a professional trade fair atmosphere of over 1billion US$
  • The organizer's objective: to double the area and number of exhibitors for the second event in September

With over 10,000 visitors, the premiere event of Texhibition Istanbul Fabric and Textile Accessories Fair, organized by the Istanbul Textile and Raw Materials Exporters' Association (ITHIB) and the Istanbul Chamber of Commerce (ITO) from March 16th to 18th, 2022 has successfully started.

  • March 16-18, 2022, Istanbul Expo Center
  • Successful start of Texhibition, Istanbul Fabric and Textile Accessories Fair with over 10,000 visitors from 63 countries
  • More than 160 exhibitors presented fabrics, yarns and accessories on approx. 5,000 square meters in the Istanbul Expo Center
  • Intensive order activity in a professional trade fair atmosphere of over 1billion US$
  • The organizer's objective: to double the area and number of exhibitors for the second event in September

With over 10,000 visitors, the premiere event of Texhibition Istanbul Fabric and Textile Accessories Fair, organized by the Istanbul Textile and Raw Materials Exporters' Association (ITHIB) and the Istanbul Chamber of Commerce (ITO) from March 16th to 18th, 2022 has successfully started.

İTHİB President Ahmet Öksüz: "Our exhibition platforms Texhibition Istanbul Fabric and Textile Accessories Fair and IFCO, Istanbul Fashion Connection, which was launched by our sister association IHKIB in February, play an important role in making Istanbul the fashion center of the Turkish textile and clothing industry. For the follow-up event to Texhibition in September this year, we expect the number of exhibitors and space to double."

The consistently positive feedback from the exhibitors underscores this expectation, as does the great interest shown by international visitors, including those from Denmark, Germany, France, Italy, the Netherlands and the UK.

The Turkish textile industry started with an export target of US$ 15 billion in 2022. The exhibition organizers assume that their platforms will contribute US$ 1 billion. Turkey is one of the most important procurement markets for the European textile industry and is becoming even more important in the course of the global supply chain problem and is now one of the top 3 most interesting procurement locations with its low prices, good quality products, reliable suppliers and short delivery times.

Exhibitors
On offer were high-quality and innovative fabrics from the weaving sector, including Kipaş Textiles, BTD Textile, Özdoku, Bossa and Yünsa; knitters like Gülle, Saka, Örkumod or İskur showed their current collections; yarn market leaders such as Korteks, Tepa and Gama were present, as were Şimşek Ege, EMR Zippers, Çağ-Tek and Öz-El Lastik for the accessories sector. A total of 166 exhibiting companies presented themselves in clearly structured segments in a professional trade fair atmosphere.

Frame program
In the Texhibition Forum, experts discussed the topics Sustainability, New Trends, Supply Chain and GMO-Free Cotton giving an outlook on the upcoming trends and developments in the Turkish textile industry. All events were heavily frequented by visitors.

Next Texhibition September 21-23, 2022

Oerlikon Barmag celebrates its 100th anniversary (c) Oerlikon Barmag
A look at the state-of-the-art assembly of a WINGS winder
30.03.2022

Oerlikon Barmag celebrates its 100th anniversary

  • Innovation begins with creativity
  • A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

  • Innovation begins with creativity
  • A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

Barmer Maschinenfabrik Aktiengesellschaft (Barmag) is founded in Barmen, located in the Bergische Land region, on March 27, 1922. The German and Dutch founders enter unchartered technological territory, one created as the result of a groundbreaking invention: in 1884, French chemist Count Hilaire Bernigaud de Chardonnet used nitrocellulose to produce the first so-called artificial silk, later known as rayon. The following decades see rapid development focusing on the search for synthetic textile fibers and their manufacturing technologies. As one of the first machine factories, Barmag battles its way through the eventful early years of the manmade fiber industry, the ‘Roaring Twenties’ and the Great Depression – and suffers the extensive destruction of its factories at the end of World War Two. Rebuilding is successful. With the unstoppable success story of purely synthetic plastic fibers such as polyamide, the company flourishes from the 1950s through to the 1970s, establishing sites in all international, for the textile industry at the time important, industrial regions and garnering prestige across the globe in the process. In the ups and downs of expansion, global competition and crises, Barmag reaches the very pinnacle of the market and becomes the preferred technological development partner for the manmade fiber industries in China, India and Turkey. The company has been a high-impact brand under the umbrella of the Oerlikon Group since 2007.

On the wings of innovation
Today, Oerlikon Barmag is a leading supplier of manmade fiber filament spinning systems and part of the Manmade Fibers Solutions business unit of the Oerlikon Polymer Processing Solutions Division. And our aspirations have not diminished: “The striving towards innovation and technological leadership has been, is and will always be part of our DNA”, emphasizes Georg Stausberg, CEO of Oerlikon Polymer Processing Solutions. In the past, this has been observable in such trailblazing innovations as the revolutionary WINGS generation of winders for POY in 2007 and WINGS for FDY in 2012. Currently, the focus of new and further developments is very much on digitalization and sustainability. Here, Oerlikon Barmag has – as one of the world’s first systems manufacturers – been implementing fully-networked smart factories for globally-leading polyester manufacturers since the end of the last decade. Within this context, digital solutions and automation are also helping to provide greater climate and environmental compatibility. This sustainability commitment is not only evidenced by the e-save label introduced for all products back in 2004: Oerlikon is endeavoring to also make all its sites carbon-neutral by 2030 and to acquire its energy exclusively from renewable sources. An ambitious target, whose achievement could be helped by the Oerlikon Barmag anniversary, states Georg Stausberg: “Innovation begins with creativity. And remembering the past provides plenty of motivation and inspiration for the future.”

29.03.2022

C.L.A.S.S. SMART VOICES: A Spotlight On Water Saving Solutions

According to the United Nations Conference of Trade and Development, the fashion and textile industry represents one of the major polluters of water in the world, with an estimated 93 billion cubic metres of water used per year.

On the occasion of Water Day, C.L.A.S.S. CEO and Founder Giusy Bettoni talked to Sensil® BioCare, Kornit, Ecoalf and Unesco on how their strategies and processes can preserve our most precious, yet limited resource.

Key Takeaways from the Speakers:
"The ocean is absolutely crucial for the survival of this planet, since it almost covers 71 percent of its surface. Writer Arthur Clarke once said: how inappropriate is to call this planet earth, when it is clearly planet ocean."
- Francesca Santoro, Programme Specialist at IOC UNESCO Regional Bureau for Science and Culture in Europe

According to the United Nations Conference of Trade and Development, the fashion and textile industry represents one of the major polluters of water in the world, with an estimated 93 billion cubic metres of water used per year.

On the occasion of Water Day, C.L.A.S.S. CEO and Founder Giusy Bettoni talked to Sensil® BioCare, Kornit, Ecoalf and Unesco on how their strategies and processes can preserve our most precious, yet limited resource.

Key Takeaways from the Speakers:
"The ocean is absolutely crucial for the survival of this planet, since it almost covers 71 percent of its surface. Writer Arthur Clarke once said: how inappropriate is to call this planet earth, when it is clearly planet ocean."
- Francesca Santoro, Programme Specialist at IOC UNESCO Regional Bureau for Science and Culture in Europe

"Sensil® BioCare is our solution to reduce the persistence of textile waste in the ocean. We embedded technology in it so that if any microfiber is released in the washing, they will break down faster than conventional nylon. Based on an external study, we have seen an almost 60 percent microplastic reduction in two years"
- Michelle Lea, Vice President Global Marketing at Nilit

"When it comes to our printing processes, almost no water is in use and the waste is minimal. We have never seen this before in this industry. Based on LCA tests, when compared to screen printing our "Atlas Max" printer saves up to 93 percent of water, while the "Presto" printer saves up to 95 percent of water".
- Michal Arbel, Sustainability Communication Lead at Kornit Digital

"One of the most important projects of the company is Upcycling the Oceans, with the aim of tackling the marine litter in collaboration with the fishing sector. Last year, we collected 300 tons of litter from the seabed, and we promoted circular economy by transforming the waste in products."
- Irene Diez, Director at Ecoalf Foundation