From the Sector

• More than 30 leading pioneers of the chemical and material sector welcome the latest political papers from Brussels, Berlin and Düsseldorf

The political situation for renewable carbon from biomass, CO2 and recycling for the defossilisation of the chemical and materials industry has begun to shift fundamentally in Europe. For the first time, important policy papers from Brussels and Germany take into consideration that the term decarbonisation alone is not sufficient, and that there are important industrial sectors with a permanent and even growing carbon demand. Finally, the need for a sustainable coverage of this carbon demand and the realisation of sustainable carbon cycles have been identified on the political stage. They are elemental to the realisation of a sustainable chemical and derived materials industry.

The goal is to create sustainable carbon cycles. This requires comprehensive carbon management of renewable sources, which includes carbon from biomass, carbon from Carbon Capture and Utilisation (CCU) – the industrial use of CO2 as an integral part – as well as mechanical and chemical recycling. And only the use of all alternative carbon streams enables a true decoupling of the chemical and materials sector from additional fossil carbon from the ground. Only in this way can the chemical industry stay the backbone of modern society and transform into a sustainable sector that enables the achievement of global climate goals. The Renewable Carbon Initiative’s (RCI) major aim is to support the smart transition from fossil to renewable carbon: utilising carbon from biomass, CO2 and recycling instead of additional fossil carbon from the ground. This is crucial because 72% of the human-made greenhouse gas emissions are directly linked to additional fossil carbon. The RCI supports all renewable carbon sources available, but the political support is fragmented and differs between carbon from biomass, recycling or carbon capture and utilisation (CCU). Especially CCU has so far not been a strategic objective in the Green Deal and Fit-for-55.

This will change fundamentally with the European Commission's communication paper on “Sustainable Carbon Cycles” published on 15 December. The position in the paper represents an essential step forward that shows embedded carbon has reached the political mainstream – supported by recent opinions from members of the European parliament and also, apparently, by the upcoming IPCC assessment report 6. Now, CCU becomes a recognised and credible solution for sustainable carbon cycles and a potentially sustainable option for the chemical and  material industries. Also, in the political discussions in Brussels, the term “defossilation” is appearing more and more often, complementing or replacing the term decarbonisation in those areas where carbon is indispensable. MEP Maria da Graça Carvahlo is among a number of politicians in Brussels who perceive CCU as an important future industry, putting it on the political map and creating momentum for CCU. This includes the integration of CCU into the new Carbon Removal Regime and the Emission Trading System (ETS).

As the new policy documents are fully in line with the strategy of the RCI, the more than 30 member companies of the initiative are highly supportive of this new development and are ready to support policy-maker with data and detailed suggestions for active support and the realisation of sustainable carbon cycles and a sound carbon management. The recent political papers of relevance are highlighted in the following.

Brussels: Communication paper on “Sustainable Carbon Cycles”
On 15 December, the European Commission has published the communication paper “Sustainable Carbon Cycles” . For the first time, the importance of carbon in different industrial sectors is clearly stated. One of the key statements in the paper is the full recognition of CCU for the first time as a solution for the circular economy, which includes CCU-based fuels as well. The communication paper distinguishes between bio-based CO2, fossil CO2 and CO2 from direct air capture when addressing carbon removal and it also announces detailed monitoring of the different CO2 streams. Not only CCU, but also carbon from the bioeconomy is registered as an important pillar for the future. Here, the term carbon farming has been newly introduced, which refers to improved land management practices that result in an increase of carbon sequestration in living biomass, dead organic matter or soils by enhancing carbon capture or reducing the release of carbon. Even though the list of nature-based carbon storage technologies is non-exhaustive in our view, we strongly support the paper’s idea to deem sustainable land and forest management as a basis for the bioeconomy more important than solely considering land use as a carbon sink. Surprisingly, chemical recycling, which is also an alternative carbon source that substitutes additional fossil carbon from the ground (i.e. carbon from crude oil, natural gas or from coal), is completely absent from the communication paper.

Berlin: Coalition paper of the new German Government: “Dare more progress – alliance for freedom, justice and sustainability”
The whole of Europe is waiting to see how the new German government of Social Democrats, Greens and Liberals will shape the German climate policy. The new reform agenda focuses in particular on solar and wind energy as well as especially hydrogen. Solar energy is to be expanded to 200 GW by 2030 and two percent of the country's land is to be designated for onshore wind energy. A hydrogen grid infrastructure is to be created for green hydrogen, which will form the backbone of the energy system of the future – and is also needed for e-fuels and sustainable chemical industry, a clear commitment to CCU. There is a further focus on the topic of circular economy and recycling. A higher recycling quota and a product-specific minimum quota for the use of recyclates and secondary raw materials should be established at European level. In the coalition paper, there is also a clear commitment to chemical recycling to be found. A significant change for the industry is planned to occur in regards to the so-called “plastic tax” of 80 cents per kilogram of non-recycled plastic packaging. This tax has been implemented by the EU, but most countries are not passing on this tax to the manufacturers and distributors, or only to a limited extent. The new German government now plans to fully transfer this tax over to the industry.

Düsseldorf: Carbon can protect the climate – Carbon Management Strategy North Rhine-Westphalia (NRW)
Lastly, the RCI highly welcomes North Rhine-Westphalia (NRW, Germany) as the first region worldwide to adopt a comprehensive carbon management strategy, a foundation for the transformation from using additional fossil carbon from the ground to the utilisation of renewable carbon from biomass, CO2 and recycling. For all three alternative carbon streams, separate detailed strategies are being developed to achieve the defossilisation of the industry. This is all the more remarkable as North Rhine-Westphalia is the federal state with the strongest industry in Germany, in particular the chemical industry. And it is here, of all places, that a first master plan for the conversion of industry from fossil carbon to biomass, CO2 and recycling is implemented. If successful, NRW could become a global leader in sustainable carbon
management and the region could become a blueprint for many industrial regions.

An exclusive collection of archival wedding dresses by Atelier Emé artfully reworked in collaboration with mending for good, the consulting firm offering luxury brands creative and ethical solutions for design-driven upcycling.

Re-Love is the capsule collection composed of sixteen wedding dresses - 10 developed in collaboration with mending for good, 6 created in-house by the company's style office. Sixteen iconic garments of the brand selected among the most significant in the history of the maison, reworked with love through a transformation project based on the principles of circularity. Harmonious and enchanted fusion of past and present, an effort that makes clear and possible innovation strategies following sustainability paths.

Atelier Emé has decided to collaborate with mending for good by developing a series of pieces based  on craftsmanship techniques, creativity, romance and fun, starting from the archive dresses. A work carried out by the style office in the sartorial laboratories of the Maison Atelier Emé deconstructing and reconstructing the chosen garments, while mending for good, on the other hand, has provided repurposing solutions through painting on fabric by Karl Joerns of La Serra MK textile Atelier in Florence, hand embroidery by Donatella de Bonis and hand decorations. A fairy-tale upcycling, achieved through a synergistic work that has combined highly specialized skills and craftsmanship for ten creations, full of colorful designs, watercolor bouquets, three-dimensional applications and ton-sur-ton embroidery.

On 27 November 2021, the Scientific Award for International Sustainable Aviation and Energy Society (SARES Award) was awarded to Professor Dr Thomas Gries from the Institut für Textiltechnik of RWTH Aachen University. The award ceremony took place during the closing ceremony of the International Symposium on Sustainable Aviation (ISSA) in a hybrid format online and simultaneously at Kasetsart University, Bangkok, Thailand.
 
With the award, the committee recognised the ongoing contribution of Pro-fessor Gries and the Institut für Textiltechnik to the digitisation and bio-transformation of the textile sector, as well as the Institute as a place of innovation for sustainable aviation.

Examples of this include the development of 3D braided ceramic matrix composite components for aircraft engines, which were researched together with partners in a Horizon 2020 project (EU project AllOxITD). The ongoing Chrysomallos research project as another example, funded under the national aeronautics research programme in Germany, aims to develop a completely new and sustainable high-performance insulator for aircraft cabins based on aerogels. These have a significantly lower weight than the glass fibre mats used up to now, while providing the same insulation performance, and solve the problem of the previously high manufacturing costs of aerogels. The aim of the project is to develop an insulation material with reduced density (reduction of more than 20 percent). To this end, a new type of insulation material based on aerogel is to be developed. The basis is an aerogel fleece (0.06 W/mK at 28 kg/m³), which has already been developed as part of a dissertation at the Institut für Textiltechnik of RWTH Aachen University (Mroszczok, J.: 2019).

The aviation industry is one of the fastest growing industries in the world. Due to this fact and its importance for society and the global economy, it needs to make special efforts towards sustainability. The ISSA, an international multi-disciplinary symposium, aims to address current issues in aviation such as improving aircraft fuel efficiency, promoting the use of biofuels, minimising environmental impact, mitigating greenhouse gas emissions and reducing engine and aircraft noise. ^

Through the award, SARES honours scientists and researchers whose work on sustainable aviation issues has made an important contribution at the international level. The selection is based on the scientific publications of the applicant or nominee, the h-index, i.e. the key figure for the worldwide perception of a scientist in professional circles, the project topics and the project results.

The new claim “Crafted Elegance” embodies Bemberg™’s values of preciousness, uniqueness, quality and refined aesthetic blended with innovation and responsible values. In 2021 Bemberg™ celebrates nine decades of commitment to deliver true timeless beauty, style and touch thanks to its responsible innovation heritage and soul. And today it relaunches a new gender aesthetics that speaks about contemporary values of transparency, inclusivity and sustainability.
 
Bemberg™ is all about joyful comfort, premium values delivering an unparalleled wellbeing. It’s the one-of-a-kind material that offers design, beauty, innovation and responsibility all at once.

Its heritage talks about premium high-quality lining for formal and sportswear, but the contemporary and worldwide journeys and designers’ cooperation are talking about fashion, outerwear, innerwear dedicated to contemporary consumers.
 
Bemberg™ by Asahi Kasei is the brand name of the regenerated cellulose fiber made from the smart tech transformation of cotton linters - short downy fiber enfolding cotton seeds. It is pre-consumer materials obtained from manufacturing process of cotton oil that are converted through a traceable and transparent closed loop process, taking place in Nobeoka, Japan, the only plant producing Bemberg™ at worldwide level. So, the Bemberg™ DNA is really based on a circular economy approach.

Bemberg™ fiber is the key ingredient of some of the most cutting-edge design innovations on planet Fashion, proving to be a sustainable, responsible and innovative material.

The Bemberg™’s 90th anniversary signs also another important moment for the company. Mr. Koji Hamada is appointed as new CEO of Asahi Kasei Fibers Italia. Mr. Hamada has a strong connection to the Italian market having already spent more than 5 years in the Gallarate’s headquarter working in close contact with all partner of the territory.

Microplastic pollution is a global challenge across many industries and sectors – one of critical importance being textiles.

A 2021 study by the California Ocean Science Trust and a group of interdisciplinary scientists acknowledges that microfibres from textiles are among the most common microplastic materials found in the marine environment. Every time synthetic clothes are manufactured, worn, washed, or disposed of, they release microplastics into terrestrial and marine environments, including human food chains. Synthetic fibres represent over two-thirds (69%) of all materials used in textiles, a proportion that is expected to rise to 73% by 2030. The production of synthetic fibres has fuelled a 40-year trend of increased per capita clothing consumption.

Global textile consumption has become:

• more reliant on non-renewable resources,
• less biodegradable, and
• increasingly prone to releasing microplastics.

The increased consumption is also discretionary, driven by consumer desire and remains unchecked. Thus, the long-term trend in the textile industry parallels the intentional addition of microplastics to products such as cosmetics. The contrast is that the European Chemicals Agency (ECHA) has recommended such intentional additions be restricted, whereas the over-consumption of synthetic fibres continues unchecked. One way for the EU to account for and mitigate microplastic pollution is through an EU-backed methodology measuring and reporting microplastic emissions, so that consumers and procurement officers have the information needed to minimise microplastic pollution resulting from their purchasing decisions.

There is a critical opportunity to address microplastic pollution in the fashion textile industry through the EU Product Environmental Footprint (PEF) methodology. To meet the environmental objectives of the Circular Economy Action Plan, the EU is proposing that companies substantiate their products’ environmental credentials using this harmonised methodology. However, microplastic pollution is not accounted for in the PEF methodology. This omission has the effect of assigning a zero score to microplastic pollution and would undermine the efforts of the European Green Deal, which aim “to address the unintentional release of microplastics in the environment.”

The incorporation of microplastic pollution as an indicator would increase the legitimacy of the PEF method as well as better inform consumer purchasing decisions, especially as the European Green Deal seeks to “further develop and harmonise methods for measuring unintentionally released microplastics, especially from tyres and textiles, and delivering harmonised data on microplastics concentrations in seawater.”

Whilst we continue to learn about the damage of microplastics and there is new knowledge emerging on the toxic impacts along the food chain, there is sufficient information on the rate of microplastic leakage into the environment to implement a basic, inventory level indicator in the PEF now. This is consistent with the recommendations of a review of microplastic pollution originating from the life cycle of apparel and home textiles. There are precedents in PEF for basic level (e.g., ‘resource use, fossils’) and largely untested (e.g. land occupation and toxicity indicators) indicators, and therefore an opportunity for the EU to promote research and development in the measurement and modelling of microplastic pollution by including such emissions in the PEF methodology. For such an indicator, the long and complex supply chains of the apparel and footwear industry would be a test case with high-impact and a global reach.

• JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

“We are looking forward to welcoming our exhibitors, partners and visitors back to Paris to resume business and promote innovation,” comments Thomas Lepretre, VP Events, Sales and Operations of JEC Group. “JEC World will bring the composites industry together to showcase the sustainability benefits of composite materials to a global audience, and to provide a stimulating meeting-place for the industry to pursue its sustainability ambitions by exchanging knowledge, forging collaborations, and imagining new concepts to protect our environment.”

• JEC World a unique get-together on sustainability throughout the product lifecycle
• JEC World a real composites “think tank”
• JEC World 2022 will demonstrate how sustainable thinking is at the heart of the innovative designs, technologies and business models driving the development of the next generation of composites applications.

Four conferences will be held over the three days, focusing on:

• Sustainability of Raw Materials for Composites: Fueling the Circular Revolution
• Rethinking Composite Materials Production: The Path to Sustainable Manufacturing
• Design for Circular Composite Products: Turning Waste, Recycling & Reuse into Opportunities
• Applications of Composite Materials for Circularity: Towards a Net-Zero World

Innovation is in JEC World’s DNA
One of JEC World’s objective’s is to promote the composites sector’s most innovative projects. More than 600 product launches are expected to be announced over the three days of the show, which will also feature JEC’s high-regarded innovation challenges and awards ceremonies :

• The JEC Composites Innovation Awards celebrate innovative global composite projects, as well as fruitful collaborations between different players in the value chain. Over more than 15 years, the JEC Composites Innovation Awards have highlighted collaborations between some 1,900 companies and recognized 203 creative projects. The winners will be announced on March 7th during a dedicated ceremony and their successful technologies will be on display throughout the show.

• The JEC Composites Startup Booster is the leading startup competition in the world of composites. In 2022, this competition will celebrate its fifth anniversary, with a special event to be organized onsite and the launch of a new “sustainability” award. And, with 20 finalists for 2022, it will recognize innovations with the greatest potential market impact and promote them to an influential audience of decision-makers. The finalists’ innovations will be displayed at JEC World’s “Startup Village.”

• For the first time, JEC World will host the 3rd edition of the SMC BMC Design Award organized by the European Alliance for SMC BMC. This international competition recognizes and promotes design excellence in the use of SMC and BMC materials. The theme of this edition is Sustainable Living, and the award is opento design students and young design professionals (less than 3 years of experience) living in Europe.

The Premium Group events will take place in Frankfurt am Main in the third week of January 2022, taking into account the 2G+ regulation (all participants have to be vaccinated, recovered and additionally daily tested).
 
On the basis of the current regulations of the federal government and the Hessian state government, which did not announce any further restrictions for vaccinated people last week, the fashion fairs PREMIUM and SEEK, the FASHIONTECH talks and the showcase of the new format THE GROUND will comply with the official health and hygiene regulations from 18th to January 20, 2022 in Frankfurt am Main.
 
This decision is based on the representative feedback from many protagonists of the industry, expert opinions and a close observation of the situation as well as an assessment of all measures that can be taken in Europe to ensure a safe event.

Four formats - one large exhibition hall
The conceptual novelty is that the PREMIUM, SEEK, THE GROUND and FASHIONTECH events will - for the first time and once - take place all together in a spacious hall, which roughly corresponds to the entire area of Station Berlin, on a total area of approx. 20,000 square meters. The resulting simplified admission management serves the safety of everyone. In this way, visitors can quickly and comfortably experience all the inspiration and concentrated brand power at once.

In addition to the security aspect, the merger of the two flagship events PREMIUM and SEEK in one large exhibition hall will bring new features, above all, in terms of content and atmosphere. Apart from an unprecedentedly strong brand portfolio, completely new synergies and energies will arise, which will make the meeting in January a unique momentum in the history of the industry.

Numerous brands have already signed-up and despite some decisions for smaller pop-up presentations, instead of large stands, the willingness to start again together and to want to send positive signals prevails! In addition to established players, many new brands also want to show their collections now.

THE GROUND - new generation, new platform
THE GROUND will give an outlook on what can be expected in summer with an exclusive press and influencer event. The Fashion Festival ‘for a young and purpose driven generation’ is an innovative platform for brands to get in direct contact with Gen Z with interactive installations, campaigns and storytelling.

At the preview event in January, 15 curated brands and key partners will present their value-based projects and products. In keynotes and panel talks, THE GROUND is dedicated to the topics most relevant to GEN Z: diversity, inclusion & sustainability.

FASHIONTECH - innovation, inspiration, content
FASHIONTECH is the content platform for fashion, technology and lifestyle. This is where decision-makers, industry insiders, communication experts and innovative minds meet to exchange experiences, discuss potential and developments, generate new leads and promote exchange between the various industries.

In addition to the core events, the Premium Group will also organize its popular evening events - due to the conditions, of course, to a slightly different extent than usual.

The European Alliance for SMC BMC and the AVK expert task force SMC/BMC are announcing they will organize together SMCCreate 2022, a conference about design in SMC and BMC composite materials. This conference will provide valuable insights in the entire product design process from idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials.

SMC and BMC are composite materials ideal for making light and intricate parts that combine structural performance with a smooth surface finish. For that reason, SMC and BMC are increasingly used in a broad range of end-use applications and markets.

Companies that have been using SMC and BMC solutions have a lot of expertise available, which can help designers to be more successful in bringing products to market. Therefore, the European Alliance for SMC BMC and the AVK expert task force SMC/BMC would like to organize together this design conference, allowing designers to learn from the experts, apply gained insights into their own designs, and broaden their horizon for new part developments.

Using SMC BMC in your part design
Within the time of only 1.5 day, the SMCCreate 2022 conference will cover a wide range of subjects, all relevant for designers in their selection of materials solutions that provide performance, cost efficiency, manufacturing ability and sustainability. In particular:

• How can SMC BMC help you to design great parts, bringing a combination of unique shapes and functional performance?
• How can SMC BMC help you to improve sustainability?
• What are the key steps in the design process, starting from initial idea to full production series manufacturing?
• What are the typical design challenges and solutions?
• How to best design for optimal manufacturing?
• Which are the tools available for designing in SMC BMC: design software, material data, tooling considerations?
• Practical examples of designs and components made in SMC BMC
• What’s new in the world of SMC BMC?

Date and Location
The SMCCreate 2022 Conference will be organized on April 6-7, 2022 in Antwerp (Belgium).

Sappi has approved an investment in Kirkniemi Mill in Lohja, Finland which enables a switch in its energy sourcing to renewable bioenergy. With this investment the mill’s direct fossil greenhouse gas emissions will reduce by ca. 90 percent, which is equivalent to 230 000 tons of carbon dioxide annually.

The project, set for completion in early 2023, will contribute significantly to Sappi Europe’s decarbonisation roadmap by exiting coal at one of its last facilities partially using this fuel type. Biomass will then be used in Kirkniemi’s multi-fuel boiler, built in 2015. The move advances Sappi towards its 2025 targets which include reducing specific greenhouse gas emissions (scope 1 and 2) by 25 percent and increasing renewable energy share to 50 percent in Europe compared to 2019.

The investment will establish the equipment needed to receive, store and handle woody biomass like the bark, sawdust and wood chips used for biofuel production. Such biomass types are by-products from the forest-based industry and utilising them for energy production derives further value from the forest resource.

In addition to increasing share of renewable energy, Sappi’s mills are also focused on reducing energy consumption. Sappi Kirkniemi Mill is party to Finland’s National Energy Efficiency Agreement and consistently reaches their energy saving targets. Kirkniemi’s ISO 50001 certification provides further evidence of the mill’s systematic improvement in energy efficiency.

Travis Wells, JD, MBA, has been appointed as GOTS Protection Officer North America. In this newly created position, he will be identifying and advising companies that are making unsubstantiated claims regarding GOTS signage.

An increasing number of companies are eager to use GOTS certified materials and want to make claims regarding GOTS content on their finished products. However, the correct use of the trademarked logo is strictly regulated in CUGS 3.1. – The conditions for the use of GOTS signs. A GOTS claim on finished products guarantees the consumer that every single step in the textile processing supply chain was certified. As soon as one stage in the supply chain is not certified, a company may not label or mention GOTS on their final product.

As a Sustainable Supply Chain Director, Travis has more than 20 years of experience advising fashion and apparel-related businesses on sustainable sourcing, product development and manufacturing in domestic and global markets. He earned his Bachelor of Arts (B.A.) in International Studies from Vassar College, his Juris Doctorate (J.D.) in Corporate Law from George Washington University Law School and his Master of Business Administration (MBA) in Global Sustainability and Finance from the Gabelli School of Business at Fordham University.