From the Sector

Reset
97 results
23.06.2022

Lectra announces the launch of its Automotive Cutting Room 4.0 offer

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 
The Automotive Cutting Room 4.0 offer is a set of solutions connected to one other: Vector, the fabric cutting equipment offering the best performance in the market; Empower, a new generation of digital services to leverage Vector's capabilities; Valia, the heart of the new offer, a software for preparing and scheduling production; and Algopex, an application for exploiting and capitalizing on all the data generated by the cutting room, so you can make the best decisions as quickly as possible.
 
Connecting up all the elements of the Automotive Cutting Room 4.0 offer delivers this unprecedented value and enables an unparalleled level of performance to be achieved. Nicolas Favreau, Lectra’s Automotive Marketing Strategy Director, explains: “When the whole cutting room process is digitalized, the data generated are centralized and accessible in real time, helping our customers to make the best decisions at every step of the production process. The benefits are huge. For example, the key performance indicators from the offer’s first users show productivity gains of around 5% and a reduction in material consumption of nearly 2%. That’s unheard of! These results, combined with the agility that the Automotive Cutting Room 4.0 brings and the complete process control, demonstrate the offer’s maximum relevance.”

Source:

Lectra 

21.06.2022

SHIMA SEIKI to exhibit at Pitti Filati 91

SHIMA SEIKI ITALIA S.p.A. will exhibit at the 91st edition of the Pitti Immagine Filati exhibition in Florence, Italy from 29th June till 1st July, 2022. Products exhibited will include the SWG-FIRST124 and N.SIR123SP computerized flat knitting machines as well as APEXFiz™ design software.

The renewed SWG-FIRST124 is a synthesis of all of SHIMA SEIKI’s experience and know-how in computerized shaped knitting, realizing a tremendous range of knitting from full-fashioning and rib shaping to integral knitting. This all-purpose capability is made possible by the revolutionary SlideNeedle™, which, together with loop pressers and transfer jacks, offers remarkable variety, expanding the boundaries of flat knitting with the capability to produce garments that were previously impossible to produce.

SHIMA SEIKI ITALIA S.p.A. will exhibit at the 91st edition of the Pitti Immagine Filati exhibition in Florence, Italy from 29th June till 1st July, 2022. Products exhibited will include the SWG-FIRST124 and N.SIR123SP computerized flat knitting machines as well as APEXFiz™ design software.

The renewed SWG-FIRST124 is a synthesis of all of SHIMA SEIKI’s experience and know-how in computerized shaped knitting, realizing a tremendous range of knitting from full-fashioning and rib shaping to integral knitting. This all-purpose capability is made possible by the revolutionary SlideNeedle™, which, together with loop pressers and transfer jacks, offers remarkable variety, expanding the boundaries of flat knitting with the capability to produce garments that were previously impossible to produce.

The N.SIR123SP computerized knitting machine with intarsia capability features a special loop presser bed for producing hybrid inlay fabrics with both knit and weave characteristics. N.SIR123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible.

APEXFiz™ is subscription-based design software that supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio. Staff at the SHIMA SEIKI booth will be donning knit uniforms produced as a collaborative effort between SHIMA SEIKI ITALIA, knitting companies and yarn companies.

Source:

SHIMA SEIKI MFG., LTD.

20.06.2022

Lectra joins Euronext Tech Leaders

Lectra, whose connected industrial equipment and software facilitate the digital transformation and Industry 4.0 transition of fashion, automotive and furniture companies, announces its selection for the new Euronext Tech Leaders stock market index. This brings Lectra into the community of European technology leaders identified by Euronext as innovative and high-growth companies.

The new Euronext Tech Leaders market index, launched on June 7, comprises 100 European technology companies listed on the Euronext markets, which meet various performance and growth criteria. With the launch of this initiative, Euronext aims to offer better visibility and new services to selected European technology leaders.

Lectra, whose connected industrial equipment and software facilitate the digital transformation and Industry 4.0 transition of fashion, automotive and furniture companies, announces its selection for the new Euronext Tech Leaders stock market index. This brings Lectra into the community of European technology leaders identified by Euronext as innovative and high-growth companies.

The new Euronext Tech Leaders market index, launched on June 7, comprises 100 European technology companies listed on the Euronext markets, which meet various performance and growth criteria. With the launch of this initiative, Euronext aims to offer better visibility and new services to selected European technology leaders.

Lectra is one of the 41 French companies that are now members of Euronext Tech Leaders. The company, founded in 1973 on a close relationship with fashion industry players, has also for the last three decades worked globally with automotive equipment and furniture manufacturers. In its three strategic markets, Lectra sells connected equipment that optimizes the cutting processes of fabric, leather and other soft materials used by manufacturers, and markets software and services that streamline their production processes while enabling them to be more agile and make considerable material savings.

In fashion, through the use of market data – made accessible and exploitable by the Internet of Things, the cloud, artificial intelligence and big data – Lectra’s software solutions also enable a better understanding of consumers’ behavior. They therefore facilitate strategic decision-making for brands, manufacturers and distributors at the key steps in the value chain of design, production and distribution. In this industry, the impact of Lectra’s solutions on reducing material consumption is even greater because it takes effect as early as the garment design stage.

Technology and innovation are therefore at the heart of Lectra’s strategy, with the company aiming to become a key player in Industry 4.0 in its strategic markets by 2030.

Source:

Lectra

(c) Hochschule Albstadt-Sigmaringen
09.06.2022

Hochschule Albstadt-Sigmaringen: Neue Software, die Chaos in textiler Fertigung beseitigt

Nadelbrüche oder Nähfehler müssen in der Produktion von Textilien schnell behoben werden – ansonsten geht wertvolle Zeit verloren, die Unternehmen bares Geld kostet. Masterstudierende der Hochschule Albstadt-Sigmaringen haben jetzt in einem fakultätsübergreifenden Projekt eine Software entwickelt, die dieses Problem minimiert. Damit reagierten sie auf das Problem, dass es bislang keine kostengünstige, flexible Lösung am Markt gibt, um in einer vernetzten textilen Fertigung einen optimalen Materialfluss planen und diesen jederzeit rückverfolgen zu können.

Nadelbrüche oder Nähfehler müssen in der Produktion von Textilien schnell behoben werden – ansonsten geht wertvolle Zeit verloren, die Unternehmen bares Geld kostet. Masterstudierende der Hochschule Albstadt-Sigmaringen haben jetzt in einem fakultätsübergreifenden Projekt eine Software entwickelt, die dieses Problem minimiert. Damit reagierten sie auf das Problem, dass es bislang keine kostengünstige, flexible Lösung am Markt gibt, um in einer vernetzten textilen Fertigung einen optimalen Materialfluss planen und diesen jederzeit rückverfolgen zu können.

Insgesamt 23 Studierende aus den Studiengängen Textil- und Bekleidungsmanagement (Fakultät Engineering) und Systems Engineering (Fakultät Informatik) realisierten das Industrieprojekt mithilfe von Prof. Matthias Kimmerle und Prof. Dr. Derk Rembold. Sie entwickelten zwei Accessoires: einen Shopper, der auch Platz für eine Yogamatte bietet, sowie eine Flaschentasche, bei der Kreditkarten oder Schlüssel beispielsweise im Fitnessstudio bequem an der Trinkflasche verstaut werden können. Das von den Studierenden entwickelte Manufacturing Execution System (MES) hilft bei der optimalen Planung, Steuerung und Optimierung der Produktion.

Die Idee der Studierenden basiert auf einer bereits existierenden App, die an einer Industrienähmaschine Echtzeitanalysen erstellen kann. Nach einer ausgiebigen Phase der Ideenfindung, Produktion und Programmierung wollen die Studierenden ihr MES nun so optimieren, dass sie die bereits vorhandene Software bereichert.

Source:

Hochschule Albstadt-Sigmaringen

07.06.2022

EFI confirms Acquisition of Inèdit Software for textile printing

Electronics For Imaging, Inc. announced that it has acquired Inèdit Software S.L., a developer of raster image processors (RIPs) and related software for digital industrial textile printing. The acquisition extends EFI’s strategy to accelerate digital transformation in industrial print through investments that advance the company’s presence and capabilities in Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Décor applications. Inèdit will be integrated into the Reggiani textile business.

Electronics For Imaging, Inc. announced that it has acquired Inèdit Software S.L., a developer of raster image processors (RIPs) and related software for digital industrial textile printing. The acquisition extends EFI’s strategy to accelerate digital transformation in industrial print through investments that advance the company’s presence and capabilities in Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Décor applications. Inèdit will be integrated into the Reggiani textile business.

Similar to EFI’s Fiery® digital front end and RIP technologies for the digital commercial and industrial printing markets, Inèdit’s neoStampa product is a recognized benchmark solution for RIPs in digital textile printing. The Inèdit product portfolio features advanced workflow solutions for textile profiling, calibration, design integration and much more. Inèdit’s RIP technology is employed across the worldwide textile industry and is one of the leading RIPs used to drive EFI Reggiani digital printers and other digital industrial textile printer brands. As part of EFI Reggiani, Inèdit will continue to support products for a broad range of digital printers.

Source:

EFI

06.06.2022

SHIMA SEIKI to exhibit at ITM 2022

SHIMA SEIKI MFG. will participate in the ITM 2022 International Textile Machinery Exhibition in Istanbul, Turkey.

SHIMA SEIKI MFG. will participate in the ITM 2022 International Textile Machinery Exhibition in Istanbul, Turkey.

SHIMA SEIKI will exhibit a wide range of its products, including proposals in seam-free WHOLEGARMENT® knitting technology that offers an alternative to labor-intensive manufacturing in Turkey and other international markets. Featured is the flagship MACH2XS WHOLEGARMENT® knitting machine with original SlideNeedle™ on four needle beds and spring-loaded moveable sinkers with expanded patterning capability, the MACH2VS V-bed machine for producing WHOLEGARMENT® items using every other needle, as well as the compact SWG091N2 for producing smaller WHOLEGARMENT® items and accessories. A brand new proposal in V-bed WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR183 machine. N.SVR123SP features a special loop presser bed that can produce hybrid inlay fabrics with both knit and weave characteristics. N.SVR123SP at ITM will feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch for even greater diversity in knit design. Meanwhile N.SSR112 offers industry-leading technology in an economical yet reliable package made in Japan. Also on display is the SFG20 glove knitting machine.

Demonstrations will be performed on SHIMA SEIKI’s SDS®-ONE APEX4 design system. At the core of the company’s “Total Fashion System” concept, SDS®-ONE APEX4 provides comprehensive support throughout the production supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to production and even sales promotion. Especially effective is the way SDS®-ONE APEX4 improves on the design evaluation process with its ultra-realistic simulation capability, whereby virtual samples replace physical sampling, consequently reducing time, cost and material that otherwise go to waste. The same capability is present in APEXFiz™ subscription-based design software. Installed on personal computers, APEXFiz™ features the same functionality as SDS®-ONE APEX4, but with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. Digital prototyping using virtual samples on SDS®-ONE APEX4 and APEXFiz™ help to digitally transform the fashion supply chain for realizing sustainable manufacturing. APEXFiz™ will be shown along with SHIMA SEIKI’s yarnbank™ digital yarn web platform that further enhances the realism of virtual samples.

Source:

SHIMA SEIKI MFG., LTD.

Trützschler Man-Made Fibers new TEC-O40 system for industrial yarn (c) Trützschler
Trützschler Man-Made Fibers new TEC-O40 system for industrial yarn
02.06.2022

Trützschler at Techtextil 2022

At this year’s Techtextil in Frankfurt/Main (June 21st to June 24th) Trützschler Nonwovens, Trützschler Card Clothing and Trützschler Man-Made Fibers present various new and proven solutions for the nonwoven, card clothing and man-made fiber sectors. Join us at booth D80 in hall 12.0!

Trützschler Nonwovens invites to talk sustainable fibers such as hemp or linen and out-of-the-box fibers such as nettle and pineapple fibers. Our solutions for manufacturing innovative nonwoven products include machinery and complete production lines for paper grade pulp, re-generated cellulose fibers, cotton and various other natural fibers.

What happens when sustainable meets digital? Trützschler Nonwovens and software partner Proptium introduce T-ONE, our new digital working environment for both fiber- and polymer-based nonwoven producers. T-ONE supports routine tasks such as quality control and recipe management but also enables systematic line monitoring and data collection for T-ONE’s line optimizations.

At this year’s Techtextil in Frankfurt/Main (June 21st to June 24th) Trützschler Nonwovens, Trützschler Card Clothing and Trützschler Man-Made Fibers present various new and proven solutions for the nonwoven, card clothing and man-made fiber sectors. Join us at booth D80 in hall 12.0!

Trützschler Nonwovens invites to talk sustainable fibers such as hemp or linen and out-of-the-box fibers such as nettle and pineapple fibers. Our solutions for manufacturing innovative nonwoven products include machinery and complete production lines for paper grade pulp, re-generated cellulose fibers, cotton and various other natural fibers.

What happens when sustainable meets digital? Trützschler Nonwovens and software partner Proptium introduce T-ONE, our new digital working environment for both fiber- and polymer-based nonwoven producers. T-ONE supports routine tasks such as quality control and recipe management but also enables systematic line monitoring and data collection for T-ONE’s line optimizations.

Trützschler Man-Made Fibers introduces the OPTIMA-based, versatile TEC-O40 and TEC-O80 systems for extruding and spinning industrial yarns (IDY). The modular OPTIMA platform is highly flexible and adaptable to manufacturing a broad spectrum of (semi-)industrial yarns from polyamide, polypropylene or polyester.

SHIMA SEIKI releases digital content web service "SHIMA Datamall™" (c) SHIMA SEIKI MFG., LTD.
01.06.2022

SHIMA SEIKI releases digital content web service "SHIMA Datamall™"

SHIMA SEIKI MFG., LTD. announces the release of its new "SHIMA Datamall™" digital content web service.

SHIMA Datamall™ is an online service that allows users to search, browse and purchase a variety of useful data for the planning, production and sales of fashion items. With SHIMA Datamall, users of the SDS®-ONE APEX series 3D design system, APEXFiz™ Design subscription software and SHIMA SEIKI flat knitting machines will be able to streamline their operations and further promote the digital transformation of textile manufacturing, thereby realizing a shift toward sustainable manufacturing.

Digital content available on SHIMA Datamall™, together with yarn data from the yarnbank™ digital yarn sourcing web service, are meant to support knit manufacturing from planning and design to production and sales, by arranging the data on SDS®-ONE APEX and APEXFiz™.

SHIMA SEIKI MFG., LTD. announces the release of its new "SHIMA Datamall™" digital content web service.

SHIMA Datamall™ is an online service that allows users to search, browse and purchase a variety of useful data for the planning, production and sales of fashion items. With SHIMA Datamall, users of the SDS®-ONE APEX series 3D design system, APEXFiz™ Design subscription software and SHIMA SEIKI flat knitting machines will be able to streamline their operations and further promote the digital transformation of textile manufacturing, thereby realizing a shift toward sustainable manufacturing.

Digital content available on SHIMA Datamall™, together with yarn data from the yarnbank™ digital yarn sourcing web service, are meant to support knit manufacturing from planning and design to production and sales, by arranging the data on SDS®-ONE APEX and APEXFiz™.

Membership is not limited to users of SHIMA SEIKI products. Anyone can search and browse from digital data comprising over 6,000 items, free of charge. Information gathered on SHIMA Datamall is useful for product planning and ideas for new collections. SHIMA SEIKI users can furthermore purchase and download data to facilitate communication with suppliers.

More information:
Shima Seiki digital yarn
Source:

SHIMA SEIKI MFG., LTD.

Mixed reality glasses: A pilot project at Adient supports the induction of new employees". Mixed reality glasses: A pilot project at Adient supports the induction of new employees". Bild: Adient
25.05.2022

Adient wins "German Innovation Award 2022"

Adient, a leading global supplier of automotive seating systems, has won the "German Innovation Award 2022" in the category "Information Technologies and Functional Software". Adient's concept of "Mixed Reality as a key to efficient induction training", developed as a pilot project by employees at Adient’s Saarlouis production site, was able to convince the interdisciplinary jury of experts from science and technology.

Adient's concept aims to efficiently train new employees in production areas with the aid of mixed reality glasses. These glasses can be used to scan QR codes that are attached to each workstation. The QR codes call up corresponding videos in the field of view of the glasses which visually help the user to learn about the processes at the respective workstation, thus replacing the previous paper-based work instructions.

Adient, a leading global supplier of automotive seating systems, has won the "German Innovation Award 2022" in the category "Information Technologies and Functional Software". Adient's concept of "Mixed Reality as a key to efficient induction training", developed as a pilot project by employees at Adient’s Saarlouis production site, was able to convince the interdisciplinary jury of experts from science and technology.

Adient's concept aims to efficiently train new employees in production areas with the aid of mixed reality glasses. These glasses can be used to scan QR codes that are attached to each workstation. The QR codes call up corresponding videos in the field of view of the glasses which visually help the user to learn about the processes at the respective workstation, thus replacing the previous paper-based work instructions.

With this concept, Adient is using the technology to design and develop world-class seating solution for its global customers. New employees can thus be given a comprehensive understanding of the complex structures of a car seat much better, faster, and in a more realistic way. In addition to optimized communication, changes in the process such as product modifications can be implemented more easily than with printed work instructions.

Source:

Adient

(c) Wiser Globe
18.05.2022

WOX by Wiser Tech hit Denim Première Vision with its futuristic design

For the first time at an in-person event, WOX by Wiser Tech hits Denim Première Vision, with its futuristic design and features leveraging Wiser Wash’s innovative potential. WOX machinery generation combines advanced hardware technology and software algorithms working on the cloud, laying new innovative foundations for fashion all over the world.

Making the finishing technologies fully traceable and accessible thanks to the advanced application of Wiser Tech Artificial Intelligence (AI) on the cloud system, WOX is one of the first of these technologies promising to redefine the entire market. Standing for Wiser Ozone X-perience, WOX physically consists of an ozone drum and generator – but, in its spirit, it was designed as a network object that provides data to Artificial Intelligence algorithms. With this feature it is really one-of-a kind in the industry, thanks to Artificial Intelligence’s potential to transform the existing business models and redefine the production process by developing new practices based on data analytics.

For the first time at an in-person event, WOX by Wiser Tech hits Denim Première Vision, with its futuristic design and features leveraging Wiser Wash’s innovative potential. WOX machinery generation combines advanced hardware technology and software algorithms working on the cloud, laying new innovative foundations for fashion all over the world.

Making the finishing technologies fully traceable and accessible thanks to the advanced application of Wiser Tech Artificial Intelligence (AI) on the cloud system, WOX is one of the first of these technologies promising to redefine the entire market. Standing for Wiser Ozone X-perience, WOX physically consists of an ozone drum and generator – but, in its spirit, it was designed as a network object that provides data to Artificial Intelligence algorithms. With this feature it is really one-of-a kind in the industry, thanks to Artificial Intelligence’s potential to transform the existing business models and redefine the production process by developing new practices based on data analytics.

The goal? To provide textile manufacturers with total control over their production, with credible sustainable solutions to address the most pressing environmental issues of the industry.

Source:

Wiser Globe / Menabò Group srl

At STOLL, innovations and optimizations go hand in hand (c) STOLL
The new STOLL customer centre in Reutlingen
11.05.2022

At STOLL, innovations and optimizations go hand in hand

  • Innovation packages from STOLL - a company of the KARL MAYER Group

Optimizations, further developments and innovations are an integral part of STOLL's activities. The industry leader in flat knitting technology has recently launched a new offering in the form of defined innovation packages. The aim here is to make STOLL's high innovative strength even clearer and enable customers to benefit from it more quickly. "The demands made on flat knitting technology are changing all the time, whether in the case of technical textiles for transportation and furniture fabrics or medical solutions well as in the fashion sector, where new yarns - such as recycled yarns or innovative technologies, such as smart textiles - have to be taken into account all the time," knows Erhard Vöhringer, Sales Manager of the STOLL Business Unit in the KARL MAYER Group "Our customers always have to keep abreast of the latest developments. We are therefore continuously developing appropriate improvements, and with our innovation packages we are now offering even more detailed demand-oriented solutions."

  • Innovation packages from STOLL - a company of the KARL MAYER Group

Optimizations, further developments and innovations are an integral part of STOLL's activities. The industry leader in flat knitting technology has recently launched a new offering in the form of defined innovation packages. The aim here is to make STOLL's high innovative strength even clearer and enable customers to benefit from it more quickly. "The demands made on flat knitting technology are changing all the time, whether in the case of technical textiles for transportation and furniture fabrics or medical solutions well as in the fashion sector, where new yarns - such as recycled yarns or innovative technologies, such as smart textiles - have to be taken into account all the time," knows Erhard Vöhringer, Sales Manager of the STOLL Business Unit in the KARL MAYER Group "Our customers always have to keep abreast of the latest developments. We are therefore continuously developing appropriate improvements, and with our innovation packages we are now offering even more detailed demand-oriented solutions."

Detail optimisations for more overall performance
The innovation packages have the benefits for customers in focus and were tailored to the respective target groups. Every optimization contained therein leads to a decisive improvement in production. All of the solutions developed can be easily integrated into existing STOLL machines.  

Innovation package Number One
Innovation package Number One will be launched on the market in a few weeks' time and is aimed explicitly at knitters who focus on technical textiles. The focus is on convenience and process acceleration. Simple network configuration, expansion of the number of NP values, extended functionality when loading and saving the pattern and also improvement of handling in connection with Production Management from PPS are just some of the features of the package. "The corresponding updates for the machine control system are available to our customers for download free of charge on Customer_Net. In the future, there will also be a cloud-based offering," explains Erhard Vöhringer.

Innovation package Number Two
Still in the pipeline, included in the Number Two innovation package, are improvements for the maintenance area – regarding the use of lubricants and the maintenance intervals (predictive maintenance) – as well as optimizations in terms of sustainability, for example when it comes to reducing consumption of oil and increasing reliability. These solutions will be suitable for all machine types and applications.
The focus here is on improvements in belt take-down, the import and export of data and support for additional storage feeders.
A physical improvement in handling is promised by the new lighting including mirror directly on the machine.
In addition, the development teams are currently working on optimizing various knitting qualities and increasing user-friendliness. So you can already be curious!

Concentrated innovative power
The STOLL development team, with several hundred engineers and technicians in the fields of electronics, software, patterning, and design, never runs out of topics. Questions like "What is the market looking for? What do customers want?  Which changes do the machines have to meet and which ones do the software control and design program have to meet?" are first discussed, evaluated and debated together as a team and then go into the development phase. "Our customers can be absolutely sure that all our innovations are meticulously tested before we go to market with them" emphasizes Erhard Vöhringer. This also applies to the solutions in the innovation packages.

Small solutions, big impact
STOLL flat knitting machines impress with their great application and production potential. Almost 150 years of extensive practical experience in flat knitting technology - the STOLL company was founded in 1873 - is unique in the industry. As a Business Unit of the KARL MAYER Group, STOLL continues to do everything in its power to inspire its customers with innovative strength. Productive, flexible and reliable - simply STOLL! This slogan has not lost any of its meaning today. Quite the contrary: With the new innovation packages, customers benefit not only from the latest high-tech flat knitting machines, but also from an always up-to-date performance upgrade of their existing machine park.
With its innovation packages, STOLL has found a flexible and very fast way directly to the customer. Anyone who wants to know more about this is cordially invited to this year's trade fairs. STOLL looks forward to seeing you at the KARL MAYER Group stand at ITM (Istanbul), Techtextil (Frankfurt), Techtextil India (Mumbai) and ITMA ASIA. (Shanghai).

More information:
Stoll Karl Mayer Gruppe
Source:

KARL MAYER Verwaltungsgesellschaft mbH

05.05.2022

Monforts at Techtextil showcasing its finishing and coating technologies

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term. (c) Lectra
Hélène Viot Poirier
04.05.2022

Ross McInnes and Hélène Viot Poirier join Lectra’s Board of Directors

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 
Daniel Harari, Chairman and Chief Executive Officer of Lectra, says: “We are delighted to welcome Ross McInnes and Hélène Viot Poirier to Lectra’s Board of Directors. Through Ross McInnes’ appointment, we will benefit from his extensive experience as a director of listed companies and his knowledge of Lectra’s challenges, as well as his expertise in strategy, management, finance, and governance. Hélène Viot Poirier has extensive knowledge of the digital world and the fashion market. Her appointment will enable the Board of Directors to benefit from her expertise in acquisition strategy, management and the development of environmentally responsible products”.
 
In the last five years, Ross McInnes has been a member of Lectra’s Board of Directors, and a member of the Audit Committee, the Compensation Committee and the Strategic Committee. This first mandate came to an end in April 2020. Ross McInnes is a graduate of the University of Oxford.
 
Since 2020, as an Independent Senior Advisor, she has supported strategic internal and external growth projects in the fashion, digital and consumer goods sectors. Hélène Viot Poirier is a graduate of HEC Paris.

Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  (c) EFI
EFI Fiery®
04.05.2022

Konica Minolta and EFI Fiery New Launch

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 
“With these new EFI Fiery DFEs, we continue to extend the range of what AccurioPress users can achieve,” said Olaf Lorenz, General Manager DX Branding Division Konica Minolta, Inc. “We are pleased to be the first to bring these powerful new DFE solutions into our portfolio as they bring more competitive capabilities to Konica Minolta’s digital printing portfolio.”
 
EFI Fiery FS500 Pro servers offer a higher value proposition
 
“The Fiery FS500 Pro new platform offers advanced speed, higher automation and more capability than other digital front ends,” said John Henze, vice president of sales and marketing, EFI Fiery. “Intelligent automation solutions in these new EFI Fiery DFEs also save customers labour cost and time by minimising the need for manual inspection of print jobs, improving automated u management, and eliminating the need to print a test file to determine where to place finishing lines.
 
“All this decreases cycle time and increases customers’ profit opportunities, while ensuring that they can delight their clients with printing that gets completed accurately and quickly. Reducing the time prepress and press operators must spend on these repetitive tasks also helps print business owners make staff more efficient, offsetting the difficulties they have hiring and retaining talent in today’s labour-constrained economy.”

Source:

EFI GmbH

03.05.2022

DOMO: Mechanische Struktursimulation für PA6-GF-Werkstoffe

  • Das MMI (Materialmodellierung, mechanische Berechnung und Spritzgusssimulation)-Team für fortgeschrittene Simulationstechnologien bietet erheblich verbesserten Service für PA6-GF-Werkstoffe
  • Integrative Simulationsumgebung lässt sich effektiv mit der Digimat-Software anwenden und gewährleistet präzise und robuste Finite-Elemente-Analysen

DOMOs fortschrittliche Simulationsumgebung MMI für PA66-Bauteile gilt auf dem Markt bereits als Referenz für präzise Simulationen. Ab sofort unterstützt dieses Simulationstool OEMs und Bauteillieferanten bei der Entwicklung von leistungsfähigen, leichten und kosteneffizienten Bauteilen aus PA6. Mit dem DOMO Service Hub können Bauteilentwickler ihre Polyamidlösungen somit schneller in Serie bringen.

Bei glasfaserverstärkten Materialien muss die Ausrichtung der Glasfasern berücksichtigt werden, die während des Spritzgussverfahrens entsteht. Dabei ermöglicht die Digimat-Software eine genaue integrative Simulation. DOMO besitzt ein umfangreiches Fachwissen bei der integrativen Simulation der TECHNYL® A-Serie von PA66-GF-Materialien und ist daher in der Lage, präzise Bauteilsimulationen durchzuführen.

  • Das MMI (Materialmodellierung, mechanische Berechnung und Spritzgusssimulation)-Team für fortgeschrittene Simulationstechnologien bietet erheblich verbesserten Service für PA6-GF-Werkstoffe
  • Integrative Simulationsumgebung lässt sich effektiv mit der Digimat-Software anwenden und gewährleistet präzise und robuste Finite-Elemente-Analysen

DOMOs fortschrittliche Simulationsumgebung MMI für PA66-Bauteile gilt auf dem Markt bereits als Referenz für präzise Simulationen. Ab sofort unterstützt dieses Simulationstool OEMs und Bauteillieferanten bei der Entwicklung von leistungsfähigen, leichten und kosteneffizienten Bauteilen aus PA6. Mit dem DOMO Service Hub können Bauteilentwickler ihre Polyamidlösungen somit schneller in Serie bringen.

Bei glasfaserverstärkten Materialien muss die Ausrichtung der Glasfasern berücksichtigt werden, die während des Spritzgussverfahrens entsteht. Dabei ermöglicht die Digimat-Software eine genaue integrative Simulation. DOMO besitzt ein umfangreiches Fachwissen bei der integrativen Simulation der TECHNYL® A-Serie von PA66-GF-Materialien und ist daher in der Lage, präzise Bauteilsimulationen durchzuführen.

Die neuen MMI-PA6-GF Materialkarten können für eine Vielzahl von Glasfaserkonzentrationen und -temperaturen sowie für elastische und elastoplastische Materialmodelle mit Versagensindikatoren eingesetzt werden. Diese sind in der Digimat Software verfügbar und führen zu den gleichen präzisen Ergebnissen wie bei den TECHNYL® A PA66-Werkstoffen. Die neuen Materialkarten heben somit die PA6-Datenbank auf das gleiche Leistungsniveau wie PA66 an. Im nächsten Schritt werden in die Digimat-Datenbank auch crashspezifische und thermische Modelle eingepflegt.

„Dank der präzisen MMI-Simulation können TECHNYL® Bauteile entwickelt werden, die leichter, leistungsfähiger und kosteneffizienter sind“, erklärt Gilles Robert, Material Expert bei DOMO. „Unsere Kunden profitieren von kürzeren Entwicklungszeiten und haben eine bessere Kontrolle über die internen Kosten. Der kontinuierliche Aufbau der TECHNYL®-Materialdatenbank erweitert das Anwendungsfeld dieser Simulationsumgebung auf PA6 Bauteile.“

Source:

DOMO Chemicals / Marketing Solutions NV

(c) Eton
22.04.2022

More localised and automated textile manufacturing with TMAS technologies

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Source:

AWOL Media

(c) UNCG
07.04.2022

Archroma partners with University of North Carolina Greensboro on color expert education

Archroma, a leader in specialty chemicals towards sustainable solutions, has announced the launch of a collaboration with the University of North Carolina Greensboro (UNCG) and its Consumer, Apparel, and Retail Studies (CARS) department, aiming to further the education of its students in the area of color management expertise.

As per the agreement, Archroma will donate its color management tools for their design projects, gaining hands-on expertise that equips them for successful careers in the fashion and textiles industries.

The students will have access to a complete set of the ready-to-use color library developed by Archroma for cotton and polyester. The library, well known among fashion designers and stylists as the Color Atlas by Archroma®, which was launched in 2016 to provide off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Today, the Color Atlas contains 4’320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists, and 1,440 colors on polyester.

Archroma, a leader in specialty chemicals towards sustainable solutions, has announced the launch of a collaboration with the University of North Carolina Greensboro (UNCG) and its Consumer, Apparel, and Retail Studies (CARS) department, aiming to further the education of its students in the area of color management expertise.

As per the agreement, Archroma will donate its color management tools for their design projects, gaining hands-on expertise that equips them for successful careers in the fashion and textiles industries.

The students will have access to a complete set of the ready-to-use color library developed by Archroma for cotton and polyester. The library, well known among fashion designers and stylists as the Color Atlas by Archroma®, which was launched in 2016 to provide off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Today, the Color Atlas contains 4’320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists, and 1,440 colors on polyester.

Beside the physical Color Atlas library, the students in the CARS program will also have access to the full digital files for use in the industry-leading 3D fashion design and development software Browzwear VSticher.

The students will be able to use the Color Atlas books and the digital data as a color selection resources to use in a variety projects and assignments.

Source:

Archroma / EMG

31.03.2022

Monforts at Techtextil North America

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Source:

AWOl Media / A. Monforts Textilmaschinen GmbH & Co. KG

14.03.2022

EFI Fiery Prep-it Print-for-Cut Software Generates Significant Time and Media Savings

Display graphics print providers now have a powerful solution for saving media and reducing prep time with newly available EFI™ Fiery® Prep-it™ true-shape nesting and cut-preparation software. The newly available solution from Electronics For Imaging, Inc. connects to any digital front end (DFE) – including full integration with EFI Fiery proServer and Fiery XF DFEs – to increase the profitability of cut jobs printed on wide- to superwide-format inkjet printers.

Media and time savings

Automated cut job preparation

Economic advantages for all display graphics businesses

Whether print businesses do their nesting layouts manually in Adobe® Illustrator®, or use an existing nesting solution, switching to Fiery Prep-it software offers compelling productivity gains and media savings. It has some of the best true-shape nesting technology on the market, including its 1° increment rotation capability and accurate double-sided nesting, giving users the ability to reduce media waste and turnaround time even further.

Display graphics print providers now have a powerful solution for saving media and reducing prep time with newly available EFI™ Fiery® Prep-it™ true-shape nesting and cut-preparation software. The newly available solution from Electronics For Imaging, Inc. connects to any digital front end (DFE) – including full integration with EFI Fiery proServer and Fiery XF DFEs – to increase the profitability of cut jobs printed on wide- to superwide-format inkjet printers.

Media and time savings

Automated cut job preparation

Economic advantages for all display graphics businesses

Whether print businesses do their nesting layouts manually in Adobe® Illustrator®, or use an existing nesting solution, switching to Fiery Prep-it software offers compelling productivity gains and media savings. It has some of the best true-shape nesting technology on the market, including its 1° increment rotation capability and accurate double-sided nesting, giving users the ability to reduce media waste and turnaround time even further.

On top of its ability to generate at least 10% in media savings, Fiery Prep-it also increases profitability by:

  • Giving companies the ability to win more tight-deadline business by preparing cut jobs in a fraction of the time required with manual nesting methods
  • Reducing errors and expensive rework due to minimal touchpoints in job production with hot folders and automation capabilities
  • Removing production bottlenecks with increased utilization of existing printing and cutting equipment.

The software integrates with EFI Fiery proServer and Fiery XF DFE print servers, providing access to an additional 1,300+ cutter and router types on top of built-in Prep-it connectivity options. The software can also connect to any RIP or DFE that accepts PDF files, serving as a central hub for cut job preparation.

More information:
EFI digital printing cutting tool
Source:

EFI

KARL MAYER: New perspectives through precise lace symmetry (c) KARL MAYER
Examples of Symm-Net designs
08.03.2022

KARL MAYER: New perspectives through precise lace symmetry

  • Symm-Net articles made using the new MJ 92/1 B impress with their perfectly symmetrical appearance

Lace is a delicate seducer. The more finely crafted its ground structure, the more effective its refined designs come across, and as such, the higher the overall quality. The innovative Symm-Net pieces, which can be produced on KARL MAYER’s new MJ 92/1 B, have a look that sets new standards.

  • Symm-Net articles made using the new MJ 92/1 B impress with their perfectly symmetrical appearance

Lace is a delicate seducer. The more finely crafted its ground structure, the more effective its refined designs come across, and as such, the higher the overall quality. The innovative Symm-Net pieces, which can be produced on KARL MAYER’s new MJ 92/1 B, have a look that sets new standards.

Lace offering maximum clarity and balance
Symm-Net lace is characterised by an extremely delicate design, offering absolute symmetry. This is thanks to the particular configuration of the MJ 92/1 B – the new multi-bar jacquard raschel machine features a split-design jacquard bar with separate threading, and can thus work using both equal and counter lapping. In addition, the newcomer has two ground guide bars at the back for counterlapped elastane. For Symm-Net’s ground structure, GB1 works a pillar notation whilst the jacquard bar works a counter-lapped inlay. The result is a net structure with absolutely symmetrical, clearly defined symmetry. To perfect the geometry, the two elastane bars with split threading – i.e. 1 in, 1 out – and counter-lapping patterning mirror the movement of the jacquard bar.

The lapping patterns thus look as follows:
• JB 91: 0 – 0 / 2 – 2 // and JB 92: 2 – 2 / 0 – 0 //
• GB 93: 0 – 0 / 1 – 1 // and GB 94: 1 – 1 / 0 – 0 //

The ground structure is not only more uniform, but also more stable than its counterparts manufactured with equal lapping. The advantages of Symm-Net are particularly visible when working finer mesh constructions. “When it comes to a delicate appearance, Leavers lace traditionally sets the standard; in particular, Endsor- Net is known for its delicate design. There is hardly any discernible difference with Symm-Net, which should open up new design perspectives, especially for the premium brands in Europe,” explains Jamie Heather, lace expert at KARL MAYER. Symm-Net offers a further advantage thanks to its simple pattern development. For example, the patterning process does not require any updates to the commonly used patterning software, SAPO and ProCad – only the machine database needs to be adapted.

High design flexibility
In addition to the Symm-Net variants, all existing patterns of the OJ 91/1 B, MJ 85/1 B and OJ 83/1 B can be implemented on the MJ 92/1 B in E 24 without restrictions; switching from the new counter lapping to the traditional JACQUARDTRONIC® LACE pattern is seamless. Jamie Heather is certain this flexibility will give customers a real competitive advantage.

All the prerequisites for a bestseller
The MJ 92/1 B has been successfully offered on the market since May 2021. The newcomer is available in gauge E 24, with a working width of 134". Despite its high design flexibility, it still offers first-class productivity. It can also reach speeds of up to 800 rpm when producing Symm-Net articles. To allow for diverse product design, 88 pattern guide bars and two elastane bars, arranged in 16 shogging lines, are available. Thanks to these features, the MJ 92/1 B mainly produces elastic galloon lace, but also all-over lace for stylish lingerie items.

Source:

KARL MAYER Verwaltungsgesellschaft mbH