From the Sector

Reset
28 results
AkzoNobel: Expansion of powder coatings plant (c) AkzoNobel
14.02.2024

AkzoNobel: Expansion of powder coatings plant in Italy

A major capacity expansion has been completed at AkzoNobel’s Powder Coatings site in Como, Italy, which will help secure supply to customers across Europe, Middle East and Africa (EMEA).

Four new manufacturing lines are now operational following the €21 million project – two of them dedicated to automotive primers and two to architectural coatings. New bonding equipment lines have also been added, ensuring that the products meet and exceed industry standards.

The extra capacity in Como has been installed in a renovated building where powder coatings were originally made – a sustainable reuse of an existing part of the site, which was established in 1992. The new lines also use recycled energy and are focused on meeting the highest standards in sustainable production, supporting the company’s ambition to reduce its carbon emissions by 50% by 2030.

AkzoNobel’s Como site is the company’s largest plant for producing powder coatings. It supplies products for market segments, such as home appliances, architecture, automotive, furniture and more.

A major capacity expansion has been completed at AkzoNobel’s Powder Coatings site in Como, Italy, which will help secure supply to customers across Europe, Middle East and Africa (EMEA).

Four new manufacturing lines are now operational following the €21 million project – two of them dedicated to automotive primers and two to architectural coatings. New bonding equipment lines have also been added, ensuring that the products meet and exceed industry standards.

The extra capacity in Como has been installed in a renovated building where powder coatings were originally made – a sustainable reuse of an existing part of the site, which was established in 1992. The new lines also use recycled energy and are focused on meeting the highest standards in sustainable production, supporting the company’s ambition to reduce its carbon emissions by 50% by 2030.

AkzoNobel’s Como site is the company’s largest plant for producing powder coatings. It supplies products for market segments, such as home appliances, architecture, automotive, furniture and more.

Source:

AkzoNobel

DITF: Recyclable event and trade fair furniture made of paper (c) DITF
Structurally wound paper yarn element with green sensor yarn.
26.01.2024

DITF: Recyclable event and trade fair furniture made of paper

A lot of waste is generated in the trade fair and event industry. It makes sense to have furniture that can quickly be dismantled and stored to save space - or simply disposed of and recycled. Paper is the ideal raw material here: locally available and renewable. It also has an established recycling process. The German Institutes of Textile and Fiber Research (DITF) and their project partners have jointly developed a recycling-friendly modular system for trade fair furniture. The "PapierEvents" project was funded by the German Federal Environmental Foundation (DBU).

Once the paper has been brought into yarn form, it can be processed into a wide variety of basic elements using the structure winding process, creating a completely new design language.

A lot of waste is generated in the trade fair and event industry. It makes sense to have furniture that can quickly be dismantled and stored to save space - or simply disposed of and recycled. Paper is the ideal raw material here: locally available and renewable. It also has an established recycling process. The German Institutes of Textile and Fiber Research (DITF) and their project partners have jointly developed a recycling-friendly modular system for trade fair furniture. The "PapierEvents" project was funded by the German Federal Environmental Foundation (DBU).

Once the paper has been brought into yarn form, it can be processed into a wide variety of basic elements using the structure winding process, creating a completely new design language.

The unusual look is created in the structure winding process. In this technology developed at the DITF, the yarn is deposited precisely on a rotating mandrel. This enables high process speeds and a high degree of automation. After the winding process, the individual yarns are fixed, creating a self-supporting component. A starch-based adhesive, which is also made from renewable and degradable raw materials, was used in the project for the fixation.

The recyclability of all the basic elements developed in the project was investigated and confirmed. For this purpose the research colleagues at the project partner from the Department of Paper Production and Mechanical Process Engineering at TU Darmstadt (PMV) used the CEPI method, a new standard test procedure from the Confederation of European Paper Industries.

Sensor and lighting functions were also implemented in a recycling-friendly manner. The paper sensor yarns are integrated into the components and detect contact.

Also, a modular system for trade fair and event furniture was developed. The furniture is lightweight and modular. For example, the total weight of the counter shown is well under ten kilograms and individual parts can easily be shipped in standard packages. All parts can be used several times, making them suitable for campaigns lasting several weeks.

A counter, a customer stopper in DIN A1 format and a pyramid-shaped stand were used as demonstrators. The research work of the DITF (textile technology) and PMV (paper processing) was supplemented by other partners: GarnTec GmbH developed the paper yarns used, the industrial designers from quintessence design provided important suggestions for the visual and functional design of the elements and connectors and the event agency Rödig GmbH evaluated the ideas and concepts in terms of usability in practical use.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

3rd edition of Source Home & Gift taking place in February 2024 Photo: Hyve Group
03.11.2023

3rd edition of Source Home & Gift in February 2024

Source Home & Gift continues to go from strength to strength with over 430 exhibitors expected to be at its third edition from 4th – 7th February 2024 at NEC Birmingham.

Uniting global manufacturers and artisan makers who all pride themselves on responsible manufacturing and sustainable production, with key retailers, brands, and contractors, Source Home & Gift increases in size by 25% with producers from UK, China, India, Philippines, Nepal and many more showcasing their wares. Debuting at the show will be pavilions from Senegal and Ghana.

All exhibitors are required to have had a recent audit from Sedex or a recognisable audit institution giving buyers the confidence that they will meet suppliers that have responsible business practices. The show features eight sectors including Homewares, Toys, Packaging, Stationery & Greetings, Gifts, Furniture, Textiles, and Technology & Services.

Source Home & Gift includes a content stage dedicated to presenting and discussing the latest trends and topics in responsible and sustainable manufacturing from internationally renowned industry professionals.

Source Home & Gift continues to go from strength to strength with over 430 exhibitors expected to be at its third edition from 4th – 7th February 2024 at NEC Birmingham.

Uniting global manufacturers and artisan makers who all pride themselves on responsible manufacturing and sustainable production, with key retailers, brands, and contractors, Source Home & Gift increases in size by 25% with producers from UK, China, India, Philippines, Nepal and many more showcasing their wares. Debuting at the show will be pavilions from Senegal and Ghana.

All exhibitors are required to have had a recent audit from Sedex or a recognisable audit institution giving buyers the confidence that they will meet suppliers that have responsible business practices. The show features eight sectors including Homewares, Toys, Packaging, Stationery & Greetings, Gifts, Furniture, Textiles, and Technology & Services.

Source Home & Gift includes a content stage dedicated to presenting and discussing the latest trends and topics in responsible and sustainable manufacturing from internationally renowned industry professionals.

The last show in September was attended by leading retailers and brands including Sainsburys, Dunelm, Haskins Garden Centre, Blue Diamond, Funky Pigeon, M&M, Matalan, Disney, Morrisons, M&S, Next, Costcutter, AIS, Alzheimers Society, Amazon, B&Q, and Card Factory.

Source:

Source Home & Gift by Hyve Group

Photo: Hyve Group
08.09.2023

Source Home & Gift: Successful conclusion

Source Home & Gift came to a successful conclusion after four days of innovation, networking, and collaboration. The global showcase provided a hub for manufacturers, designers, buyers, and distributors to engage in meaningful conversations, explore emerging trends, establish invaluable business connections, and foster global trade relationships.

From the 3rd - 6th September, the second edition of Source Home & Gift which has tripled in size since its inaugural show in February, brought together brands and retailers including Oh Deer, Sainsburys, Dunelm, Haskins Garden Centre, Indico, Blue Diamond, Funky Pigeon, M&M, Matalan, Disney, Morrisons, M&S, Next, Costcutter, AIS, Alzheimers Society, Amazon, B&Q, Card Factory, Ridleys Games, and more.

Source Home & Gift came to a successful conclusion after four days of innovation, networking, and collaboration. The global showcase provided a hub for manufacturers, designers, buyers, and distributors to engage in meaningful conversations, explore emerging trends, establish invaluable business connections, and foster global trade relationships.

From the 3rd - 6th September, the second edition of Source Home & Gift which has tripled in size since its inaugural show in February, brought together brands and retailers including Oh Deer, Sainsburys, Dunelm, Haskins Garden Centre, Indico, Blue Diamond, Funky Pigeon, M&M, Matalan, Disney, Morrisons, M&S, Next, Costcutter, AIS, Alzheimers Society, Amazon, B&Q, Card Factory, Ridleys Games, and more.

Hundreds of accredited manufacturers, producers, and artisans from 14 countries including Bangladesh, China, Germany, Ghana, Hong Kong, India, Nepal, Pakistan, Palestine, Philippines, Sri Lanka, Uganda, UK, Uzbekistan, and the first dedicated Egyptian Pavilion organised by Egypt Expo & Convention Authority (EECA) told their stories and showcased their products and manufacturing capabilities across product categories including homewares, furniture, gifts, stationery and greetings, toys, textiles, household and pet supplies, and packaging.

The next show takes place on the 4th – 7th February 2024.

Source:

Good Results PR

Intertextile Shanghai Home Textiles Messe Frankfurt (HK) Ltd
25.08.2023

Intertextile Home Textiles concludes with increased international participation

As global business activities pick up towards the back end of the year, Intertextile Shanghai Home Textiles – Autumn Edition 2023 closed its doors last week, ending a successful three days of trade at the National Exhibition and Convention Center (Shanghai). From 16 – 18 August 2023, 1,034 exhibitors (up 38.1%) from 13 countries and regions crossed paths with over 32,000 visitors (up 59.2%) from 96 countries and regions, more than 10% of which were overseas buyers. In a further testament to this edition’s internationality, new exhibitor countries and regions represented were Indonesia, Portugal, Taiwan (China), Turkey, and the US. With buyers able to source products covering the whole home textile value chain, and a fringe programme that transcended the norm, the international platform has once again marked its importance at bridging trade and communication within the industry and across sectors, circulating trade benefits to every edge of the globe.

As global business activities pick up towards the back end of the year, Intertextile Shanghai Home Textiles – Autumn Edition 2023 closed its doors last week, ending a successful three days of trade at the National Exhibition and Convention Center (Shanghai). From 16 – 18 August 2023, 1,034 exhibitors (up 38.1%) from 13 countries and regions crossed paths with over 32,000 visitors (up 59.2%) from 96 countries and regions, more than 10% of which were overseas buyers. In a further testament to this edition’s internationality, new exhibitor countries and regions represented were Indonesia, Portugal, Taiwan (China), Turkey, and the US. With buyers able to source products covering the whole home textile value chain, and a fringe programme that transcended the norm, the international platform has once again marked its importance at bridging trade and communication within the industry and across sectors, circulating trade benefits to every edge of the globe.

As the country perhaps most well-known for its immense market and prolific manufacturing hubs, for the past several decades China has been a desirable business destination for international traders. In a positive step in March, the government relaxed pandemic control measures, enabling a return to cross-border, in-person business activities. This led to a strong increase of international exhibitors and buyers at the recently concluded fair, with visitors flying in from as far away as Africa, Europe, and South America. In addition, three country and region pavilions, from Belgium, Taiwan (China), and Türkiye, added some location-specific internationality to proceedings in Shanghai, and were well-received by fairgoers.

Speaking at the show’s curtain call, Ms Wilmet Shea, General Manager of Messe Frankfurt (HK) Ltd, said: “With China’s doors widely opened to the world again, we were pleased to welcome so many new and returning international participants to the fairground over the past three days. Across the four halls, not only was the visitor flow strong, but the booths were busy and business interactions were high. The increase in overseas exhibitors, and the return of several country and region pavilions, has meant even more diversified sourcing options for our devoted buyers from home and abroad. After overcoming some global turbulence, we have strengthened this bridge to help industry players reconnect, and redirect themselves towards the new, post-pandemic era.”

Cross-sector collaboration a key highlight of the fringe programme
Enhancing the constant buzz on the show floor, the fair’s concurrently held fringe events saw upstream and downstream suppliers, industry insiders, and even inter-industry guests share some pertinent insights and innovations. This year, a series of mixed events delved into topics related to interior design trends, sustainability, new technologies, globalised and localised designs, health and wellness, and many more. One highlight was the International Intertextile Trend Forum 2023 – 2024, which illustrated the most in-vogue home designs for the upcoming season. More specific inspiration was provided by leading Japanese furniture brand IKASAS, whose exclusive seminar and display area showcased fresh home textile applications for furniture. Finally, a cross-sector conference hosted by the CRECC Full Decoration Council invited experts from both the real estate and furnishing sectors to help attendees broaden their business possibilities.

The 2024 Intertextile Shanghai Home Textiles – Spring Edition will take place from 6 – 8 March, while the Autumn Edition is scheduled for 14 – 16 August 2024. The fair is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

11.08.2023

Intertextile Shanghai Home Textiles 2023 taking place 16 – 18 August 2023

From 16 – 18 August 2023, 1,022 exhibitors from 13 countries and regions will occupy four halls and 100,000 sqm gross at the National Exhibition and Convention Center (Shanghai). This Autumn Edition of Intertextile Shanghai Home Textiles will return to its regular format, as a comprehensive platform held separately from Messe Frankfurt’s other autumn textile fairs. Complementing the strong lineup of exhibitors over all three days, a varied selection of fringe events will communicate key insights, offer industry specific inspiration, and facilitate cross-sector exchanges for fairgoers.

Buyers from 66 countries and regions have already pre-registered for the show, while a range of international brands are preparing to showcase their latest innovations. Multiple exhibitors will gather according to origin, with three country and region pavilions a must-see for fairgoers seeking exotic home textiles:

From 16 – 18 August 2023, 1,022 exhibitors from 13 countries and regions will occupy four halls and 100,000 sqm gross at the National Exhibition and Convention Center (Shanghai). This Autumn Edition of Intertextile Shanghai Home Textiles will return to its regular format, as a comprehensive platform held separately from Messe Frankfurt’s other autumn textile fairs. Complementing the strong lineup of exhibitors over all three days, a varied selection of fringe events will communicate key insights, offer industry specific inspiration, and facilitate cross-sector exchanges for fairgoers.

Buyers from 66 countries and regions have already pre-registered for the show, while a range of international brands are preparing to showcase their latest innovations. Multiple exhibitors will gather according to origin, with three country and region pavilions a must-see for fairgoers seeking exotic home textiles:

  • Belgium Pavilion: products on show include bedding fabrics and sets, curtains and curtain fabrics, sofa covers, upholstery, and much more. With the pavilion set to feature a number of Belgian brands, its highlighted exhibitors are Libeco and Love Home Fabrics.
  • Taiwan (China) Pavilion: multiple Taiwanese exhibitors, including JWL Fabrics Co Ltd, Maxland Home Textile Industrial Co Ltd, and Vanttex International Co Ltd, will demonstrate specific examples of the varied applications of their home textiles.
  • Türkiye Pavilion: organised by Uludag Textile Exporters’ Association (UTIB), the pavilion will showcase a range of curtains, upholstery fabrics, and other home textiles, from suppliers such as Aleran Tekstil Inşaat Gida Sanayi Ve Ticaret Ltd Şti, Küçükçalik Tekstil San Ve Tic A Ş and Weavers Tekstil San Ve Tic A Ş.

Beyond the pavilions, buyers can easily locate their desired home and contract textiles via conveniently placed product zones, covering categories such as curtain and curtain fabrics; sun protection and window shades; upholstery and sofa fabrics; furniture leather; bedding and editors; loungewear and bath; and rugs. Wide-ranging suppliers from China and beyond will showcase their various products, featuring international exhibitors such as Elastron – Leather & Fabrics, Morgan and PT Sinar Continental; and well-known domestic manufacturers including Hangzhou Aico Home Textile Co Ltd, Huatex International (Hangzhou) Co Ltd and Zhe Jiang Maya Fabric Co Ltd.

Fringe programme: keeping fairgoers up-to-date with range of industry developments
Business exchange at Intertextile Shanghai Home Textiles will once again be supplemented by multiple concurrent events, for home textile players to learn more about the latest industry innovations, as well as upcoming design trends. These include:

  • International Intertextile Trend Forum 2023–2024: held in the afternoon of day one, the event will be hosted by a prominent member of the ‘2023 – 2024 Intertextile International Lifestyle Trend’ trend committee, Mr Shen Lei, joined on the panel by multiple designers. They will discuss various impacts on designs, such as sustainability’s effect, the influence of emerging technologies, and international integration and localised expression.
  • IKASAS Japanese Home Design Gallery and themed seminar: the leading Japanese furniture brand IKASAS will utilise a display area to illustrate its unique design philosophy, by showcasing innovative furniture products that predominantly align with contemporary trends. The company’s founder, Mr Akiyuki Sasaki, will delve deeper into his design views in a seminar held on the morning of day one.
  • The New Power of Healthy Home Decoration Environment: a first-time collaboration with CRECC Full Decoration Council, the cross-sector conference in Hall 5.1 on day two will welcome keynote speakers from the real estate industry, to discuss topical insights at the intersection of realty and home textiles. The audience will come away with a widened scope of the different applications and demands of home textiles, and an ability to more accurately identify business opportunities within the property market.
Source:

Messe Frankfurt (HK) Ltd

Freudenberg: Sustainable microfiber solution for artificial leather applications (c) Freudenberg Performance Materials Holding GmbH
Evolon® sustainable microfiber coating substrate for artificial leather
19.07.2023

Freudenberg: Sustainable microfiber solution for artificial leather applications

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Evolon® sustainable microfiber coating substrates
Evolon® microfiber fabrics are ideal coating substrates for artificial leather applications in the shoe, furniture and car industries. They are particularly suitable as a carrier material for PU and PVC coatings. Evolon® microfiber materials have non-fraying edges, which makes converting easier and quicker. They contain 80% recycled PET from Freudenberg’s in-house bottle recycling plant. Furthermore, they are manufactured with no solvent and no chemical binder in the company’s Evolon® plant located in Colmar, France. The plant is accredited according to OEKO-TEX STeP sustainability manufacturing certification and the DETOX TO ZERO criteria. European manufacturing offers logistic benefits to European customers through shorter supply chain and transport routes.

Reinforcement material for leather goods
Manufacturers of leather goods also benefit from Evolon® microfiber when they use it as a reinforcement material for original leather. It is drapable and soft and provides optimal shaping support for leather. In addition, Evolon® materials offer important sustainability advantages for the manufacturing of luxury leather bags, such as being 100% made in Europe, eco-friendly and socially-responsible production, and the use of recycled raw materials.

Source:

Freudenberg Performance Materials Holding GmbH

Foto: BekaertDeslee/HeiQ
BekaertDeslee receiving the "High Product Quality" Interzum Award
18.05.2023

BekaertDeslee's Purotex+ with HeiQ Allergen Tech wins Interzum Award

HeiQ announces that its HeiQ Allergen* Tech has powered the award-winning product, Purotex+ from BekaertDeslee. The innovative solution for mattress ticking won the Interzum Award in the category "High Product Quality", being one of the six prizes given to BekaertDeslee.

Purotex+ powered by HeiQ Allergen* Tech is a solution for reducing exposure to allergens in bedding. The technology uses active probiotics to reduce exposure to allergens, including house dust mite matter, and pet allergens. HeiQ Allergen* Tech has received the Seal of Approval by Allergy UK, and independent testing has shown that it reduces exposure to inanimate allergens by up to 96.6%, making it a highly effective solution for allergy sufferers.

The Interzum Award recognizes exceptional design and innovation in the furniture production industry. Purotex+ was selected for the award from a field of 280 submissions from 25 countries. The jury praised the product's design, innovative features, and its contribution to improving the quality of life for people with allergies.

*Inanimate allergens such as house dust mite matter & pet allergens.

HeiQ announces that its HeiQ Allergen* Tech has powered the award-winning product, Purotex+ from BekaertDeslee. The innovative solution for mattress ticking won the Interzum Award in the category "High Product Quality", being one of the six prizes given to BekaertDeslee.

Purotex+ powered by HeiQ Allergen* Tech is a solution for reducing exposure to allergens in bedding. The technology uses active probiotics to reduce exposure to allergens, including house dust mite matter, and pet allergens. HeiQ Allergen* Tech has received the Seal of Approval by Allergy UK, and independent testing has shown that it reduces exposure to inanimate allergens by up to 96.6%, making it a highly effective solution for allergy sufferers.

The Interzum Award recognizes exceptional design and innovation in the furniture production industry. Purotex+ was selected for the award from a field of 280 submissions from 25 countries. The jury praised the product's design, innovative features, and its contribution to improving the quality of life for people with allergies.

*Inanimate allergens such as house dust mite matter & pet allergens.

Source:

HeiQ 

Photo: ANDRITZ
04.10.2022

ANDRITZ to supply needlepunch equipment to Jasztex, Canada

International technology group ANDRITZ has received an order from Jasztex Fibers Inc., Canada, to supply a crosslapper to its site of Pointe Claire (Quebec province).
The line will be dedicated to the production of polyester blends for a wide range of applications, including home furnishing, filtration, blankets, architectural, fire retardant, transportation. Start-up is planned for the second quarter of 2023.

ANDRITZ has been a regular supplier of Jasztex. Over the last years, ANDRITZ provided crosslappers for previous investments in Toronto (Ontario) and Pointe Claire (Quebec).

Jasztex’s nonwoven products are sold throughout the bedding, furniture, filtration, acoustic and thermal insulation, transportation and medical markets.

International technology group ANDRITZ has received an order from Jasztex Fibers Inc., Canada, to supply a crosslapper to its site of Pointe Claire (Quebec province).
The line will be dedicated to the production of polyester blends for a wide range of applications, including home furnishing, filtration, blankets, architectural, fire retardant, transportation. Start-up is planned for the second quarter of 2023.

ANDRITZ has been a regular supplier of Jasztex. Over the last years, ANDRITZ provided crosslappers for previous investments in Toronto (Ontario) and Pointe Claire (Quebec).

Jasztex’s nonwoven products are sold throughout the bedding, furniture, filtration, acoustic and thermal insulation, transportation and medical markets.

Source:

ANDRITZ AG

(c) HeiQ
22.09.2022

HeiQ Allergen* Tech: New textile finish for home textiles

HeiQ announces the launch of a 100% biobased, proprietary textile technology, HeiQ Allergen Tech, which aims to improve the lives of all the ones who suffer from allergies. This technology reduces inanimate allergens, like house dust mite matter, and pet allergens, and can be added in the finishing stage of the manufacturing process of textiles for bedding and furniture purposes.

Building upon its tested proprietary Synbio ingredient, HeiQ Allergen Tech is a new textile finish for home textiles, and textiles used for furniture and public transportation.

100% biobased HeiQ Allergen Tech creates an invisible protective layer that lasts at least 20 washing cycles and beyond according to performed tests. Its main advantage is cutting down the proliferation of allergens such as house dust mite matter and pet allergens (pet hair, dander, saliva), and creating conditions for reducing the health threats they pose to millions of people.

HeiQ announces the launch of a 100% biobased, proprietary textile technology, HeiQ Allergen Tech, which aims to improve the lives of all the ones who suffer from allergies. This technology reduces inanimate allergens, like house dust mite matter, and pet allergens, and can be added in the finishing stage of the manufacturing process of textiles for bedding and furniture purposes.

Building upon its tested proprietary Synbio ingredient, HeiQ Allergen Tech is a new textile finish for home textiles, and textiles used for furniture and public transportation.

100% biobased HeiQ Allergen Tech creates an invisible protective layer that lasts at least 20 washing cycles and beyond according to performed tests. Its main advantage is cutting down the proliferation of allergens such as house dust mite matter and pet allergens (pet hair, dander, saliva), and creating conditions for reducing the health threats they pose to millions of people.

Several tests have proven the high effectiveness of HeiQ Allergen Tech in reducing the levels of house dust mite matter (96.6%), allergens from dog hair (76.5%) and cat hair (83.6%), keeping a durable effect even after frequent washing. Following these results, Allergy UK has assessed and certified HeiQ’s new allergen control textile technology.

Source:

HeiQ

(c) Eli Magaziner
22.09.2022

Kornit Digital, Cozmo and Raw-Edges present sofa with custom designs

Kornit Digital is collaborating with furniture start-up Cozmo and London design studio Raw-Edges to showcase the unlimited creativity made possible by digitally produced custom sofa jacket designs at the London Design Festival, September 17th -25th. Dubbed “Cheek Prints,” the collection was created sustainably, quickly, and on-demand with Kornit’s digital fashion and textile production solutions. Each unique cover features visually designs intended to transform plain, standard sofas into custom creations with an entirely fresh look and feel. The collection was designed by Raw-Edges at their London design studio.

Kornit Digital is collaborating with furniture start-up Cozmo and London design studio Raw-Edges to showcase the unlimited creativity made possible by digitally produced custom sofa jacket designs at the London Design Festival, September 17th -25th. Dubbed “Cheek Prints,” the collection was created sustainably, quickly, and on-demand with Kornit’s digital fashion and textile production solutions. Each unique cover features visually designs intended to transform plain, standard sofas into custom creations with an entirely fresh look and feel. The collection was designed by Raw-Edges at their London design studio.

The sofa collection was produced using Kornit’s Presto direct-to-fabric digital production system. With the on-demand technology, designers can easily and rapidly embrace new possibilities to transform mere concepts into custom fabrics. Digital production removes typical limitations of one fabric, one design at a time – whether it’s a single sofa or many sofas – and at the same cost. For industries ranging from fashion and home décor to other advanced textile applications, the Kornit solution consistently unlocks unlimited creativity – producing garments and fabrics with a high quality and a soft feel.

Source:

Kornit / Pr4u

Photo: Andritz/Recypur
02.09.2022

New mattresses made of industrial & post-consumer foam waste

  • Recypur successfully starts up a complete airlay line delivered by ANDRITZ for its mill in L’Alcúdia, Spain

The airlay line is designed for recycling of post-industrial and post-consumer foam and was developed specifically for the bedding and furniture industry, with material heights reaching 20 cm and densities of up to 120 kg/m3. Experimental tests carried out together with experts from ANDRITZ Laroche led to the conclusion that the mechanical method for recycling polyurethane is the most versatile and reliable.

With a capacity of 1.2 t/h, this airlay line enables Recypur to supply new mattresses made of industrial & post-consumer foam waste from old mattresses. This well proven process allows to reduce the environmental impact, increase self-sufficiency and eventually reduce the use of polyurethane. Such a set-up also allows multiple functional materials to be incorporated into the blend, such as flame-retardant, conductive and insulating fibers, among others. Thanks to this tailored approach, Recypur is now able to expand its diversification, innovation and reputation on the Spanish market.

  • Recypur successfully starts up a complete airlay line delivered by ANDRITZ for its mill in L’Alcúdia, Spain

The airlay line is designed for recycling of post-industrial and post-consumer foam and was developed specifically for the bedding and furniture industry, with material heights reaching 20 cm and densities of up to 120 kg/m3. Experimental tests carried out together with experts from ANDRITZ Laroche led to the conclusion that the mechanical method for recycling polyurethane is the most versatile and reliable.

With a capacity of 1.2 t/h, this airlay line enables Recypur to supply new mattresses made of industrial & post-consumer foam waste from old mattresses. This well proven process allows to reduce the environmental impact, increase self-sufficiency and eventually reduce the use of polyurethane. Such a set-up also allows multiple functional materials to be incorporated into the blend, such as flame-retardant, conductive and insulating fibers, among others. Thanks to this tailored approach, Recypur is now able to expand its diversification, innovation and reputation on the Spanish market.

The scope of supply includes a blending line with five feeders, an Exel 1500 for fine opening, an Airlay Flexiloft+ with 2.20 m working width, a recycling machine and an oven.

Airlay lines strongly support the circular economy and are part of ANDRITZ’s comprehensive product portfolio of sustainable solutions that help customers achieve their own sustainability goals in terms of climate and environmental protection.

Recypur, based in the Spanish province of Valencia, is part of DELAX, a Spanish group specialized in manufacturing and commercialization of innovative beds and mattresses. This company is the first Spanish manufacturer of recycled flexible polyurethane foam cores from post-consumer foam waste.

Source:

Andritz AG

20.06.2022

Lectra joins Euronext Tech Leaders

Lectra, whose connected industrial equipment and software facilitate the digital transformation and Industry 4.0 transition of fashion, automotive and furniture companies, announces its selection for the new Euronext Tech Leaders stock market index. This brings Lectra into the community of European technology leaders identified by Euronext as innovative and high-growth companies.

The new Euronext Tech Leaders market index, launched on June 7, comprises 100 European technology companies listed on the Euronext markets, which meet various performance and growth criteria. With the launch of this initiative, Euronext aims to offer better visibility and new services to selected European technology leaders.

Lectra, whose connected industrial equipment and software facilitate the digital transformation and Industry 4.0 transition of fashion, automotive and furniture companies, announces its selection for the new Euronext Tech Leaders stock market index. This brings Lectra into the community of European technology leaders identified by Euronext as innovative and high-growth companies.

The new Euronext Tech Leaders market index, launched on June 7, comprises 100 European technology companies listed on the Euronext markets, which meet various performance and growth criteria. With the launch of this initiative, Euronext aims to offer better visibility and new services to selected European technology leaders.

Lectra is one of the 41 French companies that are now members of Euronext Tech Leaders. The company, founded in 1973 on a close relationship with fashion industry players, has also for the last three decades worked globally with automotive equipment and furniture manufacturers. In its three strategic markets, Lectra sells connected equipment that optimizes the cutting processes of fabric, leather and other soft materials used by manufacturers, and markets software and services that streamline their production processes while enabling them to be more agile and make considerable material savings.

In fashion, through the use of market data – made accessible and exploitable by the Internet of Things, the cloud, artificial intelligence and big data – Lectra’s software solutions also enable a better understanding of consumers’ behavior. They therefore facilitate strategic decision-making for brands, manufacturers and distributors at the key steps in the value chain of design, production and distribution. In this industry, the impact of Lectra’s solutions on reducing material consumption is even greater because it takes effect as early as the garment design stage.

Technology and innovation are therefore at the heart of Lectra’s strategy, with the company aiming to become a key player in Industry 4.0 in its strategic markets by 2030.

Source:

Lectra

Tearing Line Foto: Andritz
20.05.2022

ANDRITZ at TECHTEXTIL 2022

International technology group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at Techtextil in Frankfurt from June 21 to 24. The ANDRITZ product portfolio covers state-of-the-art nonwovens and textile production technologies, such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing. For Techtextil, special focus lies on technologies for textile recycling, needlepunch, airlay, wetlaid glass fibers and textile calendering.

International technology group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at Techtextil in Frankfurt from June 21 to 24. The ANDRITZ product portfolio covers state-of-the-art nonwovens and textile production technologies, such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing. For Techtextil, special focus lies on technologies for textile recycling, needlepunch, airlay, wetlaid glass fibers and textile calendering.

TEXTILE RECYCLING TECHNOLOGIES BASED ON TEARING
With the acquisition of ANDRITZ Laroche SAS, ANDRITZ has expanded its product portfolio to include airlay and recycling technology as well as bast fiber processing technologies. Complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end-uses are one focus of this product range. Customer awareness and regulations are forcing clothing brands to recycle their textile waste in their own products. Recycled fibers can also be used in the nonwovens industry for various applications, for example in the automotive industry, for insulation, mattresses, and furniture felts.

ANDRITZ Laroche offers a complete process range of tearing lines from 50 up to 3,000 kg/h, which can be used for almost all types of pre/post-consumer textile waste. The aim is to preserve the character of the original fibers, for example cotton, by maximizing fiber length, strength and feel.

Source:

Andritz AG

03.02.2022

The 2022 JEC Composites Innovation Awards: Official Finalists line up

Première Vision - Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composite industry.
The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

After pre-selection of the finalists, one winner is selected in each category:

  • Aerospace – Application
  • Aerospace – Process
  • Automotive & road transportation – surface
  • Automotive & road transportation – structural
  • Building & Civil Engineering
  • Design, Furniture & Home
  • Equipment & Machinery
  • Maritime Transportation & Shipbuilding
  • Sports, Leisure & Recreation
  • Renewable Energy

The international jury representing the entire composites value chain includes:

Première Vision - Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composite industry.
The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

After pre-selection of the finalists, one winner is selected in each category:

  • Aerospace – Application
  • Aerospace – Process
  • Automotive & road transportation – surface
  • Automotive & road transportation – structural
  • Building & Civil Engineering
  • Design, Furniture & Home
  • Equipment & Machinery
  • Maritime Transportation & Shipbuilding
  • Sports, Leisure & Recreation
  • Renewable Energy

The international jury representing the entire composites value chain includes:

  • Michel COGNET, Chairman of the Board, JEC Group
  • Christophe BINETRUY, Professor of Mechanical Engineering, EC Nantes
  • Kiyoshi UZAWA, Professor/Director, Innovative Composite Center, Kanazawa Institute of Technology
  • Jiming Sung HA, Professor, Hanyang University
  • Brian KRULL, Global Director of Innovation, Magna Exteriors Inc
  • Karl-Heinz FULLER, Manager Future Outside Materials, Mercedes Benz AG
  • Deniz KORKMAZ, CTO, Kordsa Teknik Tekstil AS
  • Henry SHIN, Head of Center, K-CARBON
  • Véronique MICHAUD, Associate Professor/ Director, EPFL – Laboratory for Processing of Advanced Composites
  • Alan BANKS, Lightweight Innovations Manager, Ford Motor Company
  • Enzo CRESCENTI, Technical Authority and Composite Expert, Airbus

Discover the finalists in each category here.

Source:

JEC Group

13.12.2021

TMAS: Digitalisation demands streamlined solutions

Fully integrated production lines from single source suppliers have increasingly become the norm in the textile industry and make complete sense in meeting today’s complex supply chain needs, according to TMAS – the Swedish Textile Machinery Association.

“Over the past few decades, textile mills have transitioned from consisting of collections of individual machines serviced and maintained largely by in-house mechanics as well as separate supplier companies for each part of the production line,” says TMAS Secretary General Therese Premler-Andersson. “Those in-house engineering service teams have diminished over the years, while the introduction of electronic drive systems in the 1980s and 90s also put an increased emphasis on the need for third party electrical engineers, operating separately to the machine builders.

“Subsequently, mechanical machines and electronic drive systems became much more integrated, and more recently, with the advent of digitalisation, entire production lines are becoming centrally controlled with remote, instantaneous connections to their suppliers for service and maintenance.

Fully integrated production lines from single source suppliers have increasingly become the norm in the textile industry and make complete sense in meeting today’s complex supply chain needs, according to TMAS – the Swedish Textile Machinery Association.

“Over the past few decades, textile mills have transitioned from consisting of collections of individual machines serviced and maintained largely by in-house mechanics as well as separate supplier companies for each part of the production line,” says TMAS Secretary General Therese Premler-Andersson. “Those in-house engineering service teams have diminished over the years, while the introduction of electronic drive systems in the 1980s and 90s also put an increased emphasis on the need for third party electrical engineers, operating separately to the machine builders.

“Subsequently, mechanical machines and electronic drive systems became much more integrated, and more recently, with the advent of digitalisation, entire production lines are becoming centrally controlled with remote, instantaneous connections to their suppliers for service and maintenance.

“In this context, the integration of machinery and automation specialists as single-source suppliers makes perfect sense, while partnerships between machine builders and their customers have never been more important.”

The recent acquisition of Nowo textile machinery from its previous owner, Brandstones Ab Oy, by TMAS member ACG Kinna, she adds, is a good example of this general trend.

Nowo, headquartered in Turku, Finland, designs, manufactures and exports high-end textile production machinery mainly for the fibre processing industry. At the end of the 1980s it introduced the highly successful Nowo Vac pillow filling system, which has been its best-selling system, alongside the Noworoll ball fibre machine, introduced in the 1990s.

Nowo’s machine range covers the entire production process from bale opening to weighing and filling, and complete production lines are tailored to the specific needs of customers. The company can also deliver individual machines such as bale openers, cards, cross-lappers, pickers, mixing devices, material silos, sucking devices, anti-static units etc. Seven patents cover the company’s technologies.

Founded in 1977, ACG Kinna Automatic, based in Skene in Sweden, specialises in customised and cost-efficient solutions for the production of pillows and quilts. All of its design, manufacturing and final line testing is carried out in Sweden and the reliability and longevity of its machines has earned it the trust of the world’s largest furniture and home decoration retailers and Europe’s largest manufacturer of pillows and duvets, among many customers.

Source:

TMAS / AWOL Media

(c) Koelnmesse / imm cologne
13.12.2021

imm cologne: Restart postponed to 2023

imm cologne will not take place on the planned dates in January 2022 in Cologne. The executive board of Koelnmesse reached this decision in close consultation with the Association of the German Furniture Industry (VDM) and in agreement with other well-known industry representatives at the international level. "This step is restricted exclusively to imm cologne and its specific requirements for trade fair operations. We are principally planning, as before, to carry out our spring events in 2022. The political guidelines allow for this, and, following the excellent and safe course of the past autumn trade fairs, this must remain our mission in the interests of the participating industries“, says COO Oliver Frese.

imm cologne will not take place on the planned dates in January 2022 in Cologne. The executive board of Koelnmesse reached this decision in close consultation with the Association of the German Furniture Industry (VDM) and in agreement with other well-known industry representatives at the international level. "This step is restricted exclusively to imm cologne and its specific requirements for trade fair operations. We are principally planning, as before, to carry out our spring events in 2022. The political guidelines allow for this, and, following the excellent and safe course of the past autumn trade fairs, this must remain our mission in the interests of the participating industries“, says COO Oliver Frese.

The VDM, as the industry sponsor of the event, and against the background of the current pandemic situation, sees the economic success of the event and thus the successful restart of imm cologne in January as extremely endangered. "Following consultation with numerous exhibitors, industry representatives and trading partners, there is either no question of participation on the part of German exhibitors or exhibitors from the German-speaking region, or this is very much in doubt", according to Jan Kurth, CEO of the VDM.  Similar feedback also came from many European countries.

"The current special basic conditions in the interior design industry make the practicability of imm cologne almost impossible", according to Oliver Frese. "We didn't make this very bitter decision easy for ourselves, but consider it to be our obligation to take this step now in close consultation with the industry. In this way we provide clarity and planning security in the interests of our exhibitors. In our shared perspective, an imm cologne with its claim as a leading trade fair for the interior design industry is not realisable in the current situation", the COO continues. "We are currently working actively on options for also still being able to offer exhibitors of imm cologne an attractive trade fair presence at the international level. Here, both spoga+gafa and ORGATEC present excellent alternatives in the interior design portfolio of Koelnmesse".

The cancellation is restricted to imm cologne and expressly does not include other B2B events planned for spring 2022 in Cologne. In autumn, the Cologne art fairs and the nutrition fair Anuga, among others, demonstrated that trade fairs are also once again possible at the international level and can be carried out safely for everyone. It is currently quite clear how differently individual industries are reacting to the present situation. "We have determined a heterogeneous estimation among the exhibiting companies in the face of the enduring pandemic situation in Germany", according to Oliver Frese, COO of Koelnmesse. The assessments vary in degree specific to different industries, "sometimes with a greater impact on the respective trade fair and sometimes hardly palpable", the COO continues. "In the interests of cooperation in a spirit of trust, we are of course communicating closely with our industries and customers, in order to be able to reach just these kinds of industry-specific decisions," according to Frese.

The hygiene and safety concept of Koelnmesse, which remains entirely in keeping with the decisions of the Minister-President Conference and the Corona Protection Ordinance of NRW, stands for safe processes.

A positive picture was still taking shape for imm cologne as a whole with the end of the term for cancellation without penalties in mid-October: with 600 exhibitors from more than 50 countries, the event would still have been the largest and most relevant forum for the interiors industry, hosted in Europe’s biggest furniture market, even in this smaller form in terms of numbers.

The professional exchange and the networking between internationally active companies and highly qualified trade visitors provide the basis at every imm cologne for future-oriented innovations and the development of new business models. In this way, imm cologne ensures important business impulses for the industry. Koelnmesse, together with the VDM and the exhibiting industry, will therefore do everything possible to get a powerful and innovative imm cologne 2023 on its feet.        

Source:

Koelnmesse / imm cologne

Photo: Centa-Star
25.08.2021

CENTA-STAR introduces Product with CELLIANT®

Materials science innovation pioneer Hologenix, LLC, whose CELLIANT® infrared technology is an ingredient in brands across many categories, has another important partner, bedding specialist Centa-Star. Based in Stuttgart, Germany and available throughout Europe, Centa-Star has introduced a new line of “Regeneration” duvets and pillows infused with CELLIANT mineralized fibers.  

Regeneration products, thanks to CELLIANT, are thermo-regulating with maximum breathability, promoting stronger performance, faster recovery and better sleep.

CELLIANT thermo-reactive minerals absorb the body heat and convert it into infrared energy, which is reflected back to the body.  The resulting temporary increase in blood flow and local circulation helps regulate body temperature and increases tissue oxygen. This leads to a more restful, restorative sleep as well as faster recovery and stronger performance.

Materials science innovation pioneer Hologenix, LLC, whose CELLIANT® infrared technology is an ingredient in brands across many categories, has another important partner, bedding specialist Centa-Star. Based in Stuttgart, Germany and available throughout Europe, Centa-Star has introduced a new line of “Regeneration” duvets and pillows infused with CELLIANT mineralized fibers.  

Regeneration products, thanks to CELLIANT, are thermo-regulating with maximum breathability, promoting stronger performance, faster recovery and better sleep.

CELLIANT thermo-reactive minerals absorb the body heat and convert it into infrared energy, which is reflected back to the body.  The resulting temporary increase in blood flow and local circulation helps regulate body temperature and increases tissue oxygen. This leads to a more restful, restorative sleep as well as faster recovery and stronger performance.

Centa-Star Regeneration products are available online throughout Europe in selected department stores in Germany, Austria and Switzerland, including KaDeWe Berlin, Betten Rid in Munich, Karstadt or Kaufhof stores, in well-sorted furniture shops, in upscale specialist shops.

More information:
Centa-Star Bedding sleep industry
Source:

Sarah P. Fletcher Communications

03.06.2021

We aRe Spin Dye signs collaboration agreement with Stokke As

We aRe Spin Dye (WRSD) AB (publ) (“WRSD”) has entered into a collaboration agreement with the Norwegian brand Stokke®. Stokke AS, a Norwegian manufacturer of children's furniture and accessories, is well known among parents of young children, since their mission is to manufacture products that strengthen the bond between parent and child.

Stokke is known for creating products that are designed to last a lifetime. High production standards, durable and robust materials, flexibility and adjustment options, together with timeless design, is a guarantee of long life for Stokke's products.

We aRe Spin Dye (WRSD) AB (publ) (“WRSD”) has entered into a collaboration agreement with the Norwegian brand Stokke®. Stokke AS, a Norwegian manufacturer of children's furniture and accessories, is well known among parents of young children, since their mission is to manufacture products that strengthen the bond between parent and child.

Stokke is known for creating products that are designed to last a lifetime. High production standards, durable and robust materials, flexibility and adjustment options, together with timeless design, is a guarantee of long life for Stokke's products.

Andreas Andrén, CEO of We aRe SpinDye views the collaboration with Stokke as a very exciting agreement with great potential:
-"Of course, our resource-efficient dyeing method is at the center of this collaboration. I have three children myself and as a parent of small children I know how important it is to have sustainable products. We aRe SpinDye will now be extending the life of Stokke's products. As a result of our textile fiber being homogeneously colored, our fabrics' test values are at the top for what is called "colorfastness to light". Our fabrics are thus bleached considerably less than conventionally dyed fabrics."

Janne Muri, project manager at Stokke for this collaboration, explains Stokke's view on sustainability.
"By taking care of our children, we also protect our planet. We strive for sustainable solutions in everything we do. High quality, sustainable materials and opportunities to adapt the products as the child grows, together with a timeless design, give our products a long lifespan that can last for generations. And with these core values in our group, it feels completely natural that we start a collaboration with We aRe SpinDye."

More information:
We aRe Spin Dye
Source:

We aRe Spin Dye

01.06.2021

Lectra completes the acquisition of Gerber Technology

Lectra finalizes June 1st, the acquisition of all outstanding shares of Gerber Technology, on a cash-free debt-free basis, for 175 million euros – financed through a 140 million euro loan and the Group's available cash – plus 5 million newly issued Lectra shares to AIPCF VI LG, Gerber Technology’s sole shareholder.

This strategic combination, of which all stages have now been successfully completed, has led to the creation of a leading global Industry 4.0 player for the fashion, automotive and furniture markets.

“The union of our respective innovative expertise, our state-of-the-art offers and our talented resources will enable us to bring long-term value to our customers. We will now be in an even better position to support our customers throughout the world in accelerating the digital transformation of their operations,” says Daniel Harari, Chairman and CEO of Lectra.

This acquisition, which was announced on February 8, was approved by Lectra’s Board of Directors on March 25 and by Lectra’s shareholders June, 1.

Lectra finalizes June 1st, the acquisition of all outstanding shares of Gerber Technology, on a cash-free debt-free basis, for 175 million euros – financed through a 140 million euro loan and the Group's available cash – plus 5 million newly issued Lectra shares to AIPCF VI LG, Gerber Technology’s sole shareholder.

This strategic combination, of which all stages have now been successfully completed, has led to the creation of a leading global Industry 4.0 player for the fashion, automotive and furniture markets.

“The union of our respective innovative expertise, our state-of-the-art offers and our talented resources will enable us to bring long-term value to our customers. We will now be in an even better position to support our customers throughout the world in accelerating the digital transformation of their operations,” says Daniel Harari, Chairman and CEO of Lectra.

This acquisition, which was announced on February 8, was approved by Lectra’s Board of Directors on March 25 and by Lectra’s shareholders June, 1.

More information:
Gerber Technology Lectra/Gerber
Source:

Lectra