From the Sector

Reset
91 results
Virtual RISE Conference Highlights (c) INDA
RISE 2021 Award Winner Canopy
06.10.2021

Virtual RISE Conference Highlights

  • Next-Gen Technologies for Nonwovens/Engineered Materials
  • Canopy Respirator from Canopy Wins Innovation Award

145 professionals in product development, material science, and new technologies convened for the 11th conference edition of RISE®—Research, Innovation & Science for Engineered Fabrics, held virtually, Sept. 28-30. The event was co-organized by INDA, the Association of the Nonwoven Fabrics Industry, The Nonwovens Institute, and North Carolina State University.

The program focused on Nonwoven Material Science Developments, Sustainability, Increasing Circularity, Promising Innovations, Process Innovations, Material Innovations, Government/NGO Challenges to Single-Use Plastics, Machine-Assisted-Learning Development of Biopolymers, and Market Intelligence and Economic Insights.

Participants praised the high-quality program content, in-depth round table discussions, networking and Q&A’s where participants ask expert speakers questions pertaining to their focused presentations.

Highlights among the 26 presentations included

  • Next-Gen Technologies for Nonwovens/Engineered Materials
  • Canopy Respirator from Canopy Wins Innovation Award

145 professionals in product development, material science, and new technologies convened for the 11th conference edition of RISE®—Research, Innovation & Science for Engineered Fabrics, held virtually, Sept. 28-30. The event was co-organized by INDA, the Association of the Nonwoven Fabrics Industry, The Nonwovens Institute, and North Carolina State University.

The program focused on Nonwoven Material Science Developments, Sustainability, Increasing Circularity, Promising Innovations, Process Innovations, Material Innovations, Government/NGO Challenges to Single-Use Plastics, Machine-Assisted-Learning Development of Biopolymers, and Market Intelligence and Economic Insights.

Participants praised the high-quality program content, in-depth round table discussions, networking and Q&A’s where participants ask expert speakers questions pertaining to their focused presentations.

Highlights among the 26 presentations included

  • Sustainable Solutions for our Plastic Planet Predicament, by Marc A. Hillmyer, Ph.D., McKnight Presidential Endowed Chair, University of Minnesota;
  • Closed-Loop Recycling Pilot of Single-Use Face Masks by Peter Dziezok, Ph.D., Director of Open Innovation, Proctor & Gamble;
  • Innovating a Sustainable Future for Nonwovens: A European Perspective, by Matt Tipper, Ph.D., CEO, Nonwovens Innovation & Research Institute (NIRI);
  • Phantom Platform: The Polyolefin-cellulose Coformed Substrates Technology, by Fabio Zampollo, CEO and Founder of Teknoweb Materials; 
  • Guiding Environmentally Sustainable Innovations – From Reactive to Proactive Life Cycle Management, by Valentina Prado, Ph.D., Senior Sustainability Analyst, EarthShift Global LLC;  
  • High-Loft, Ultra-Soft Hygiene Solutions, Paul E. Rollin, Ph.D., Senior Principal Scientist – Global Hygiene, Propylene-Vistamaxx-Adhesion (PVA) Global Technology, ExxonMobil Chemical Company;
  • Canadian Plastic Policy Update, by Karyn M. Schmidt, Senior Director, Regulatory & Technical Affairs, American Chemistry Council (ACC).

Other highlights included the announcement of Canopy Respirator as the winner of this year’s RISE® Innovation Award winner. The annual award recognizes innovation in areas within and on the periphery of the nonwovens industry which use advanced science and engineering principles to develop unique or intricate solutions to problems and advance the usage of nonwovens.

RISE® Innovation Award Winner
The RISE® Innovation Award was presented to Canopy for their Canopy Respirator. The productis an innovative respirator that is fully mechanical, non-electrostatic, with a filter designed for superior breathability while offering the wearer facial transparency. The breakthrough respirator features 5.5mm water column resistance at 85 liters (3 cubic feet) per minute, 2-way filtration, and a pleated filter that contains over 500 square centimeters of surface area. The patented Canopy respirator resists fluids, and eliminates fogging of eyeglasses.

Source:

INDA, Association of the Nonwoven Fabrics Industry

16th World Pultrusion Conference - CALL FOR PAPERS
WPC2022
22.09.2021

16th World Pultrusion Conference - CALL FOR PAPERS

The EPTA – European Pultrusion Technology Association organizes in cooperation with the ACMA – American Composites Manufacturers Association - the 16th World Pultrusion Conference on 03 – 04 March 2022 in Paris, France (as a “hybrid event”, this conference will also have the option of online access). The conference is one of the leading pultrusion events in the world. The event takes place just before the JEC World 2022 in Paris (08 – 10 March 2022).

The presentations are to document innovations in the following subject areas of pultruded reinforced plastics:

● Market development in Europe, USA, Asia
● Innovative applications
● New Markets: Ideas for potential new applications with pultruded shapes or systems
● Sustainability: Technical possibilities, recycling, etc.
● Raw materials
   ○ Development of fibres
   ○ Development of resins
● Construction / Testing / Calculation
● Processes

The EPTA – European Pultrusion Technology Association organizes in cooperation with the ACMA – American Composites Manufacturers Association - the 16th World Pultrusion Conference on 03 – 04 March 2022 in Paris, France (as a “hybrid event”, this conference will also have the option of online access). The conference is one of the leading pultrusion events in the world. The event takes place just before the JEC World 2022 in Paris (08 – 10 March 2022).

The presentations are to document innovations in the following subject areas of pultruded reinforced plastics:

● Market development in Europe, USA, Asia
● Innovative applications
● New Markets: Ideas for potential new applications with pultruded shapes or systems
● Sustainability: Technical possibilities, recycling, etc.
● Raw materials
   ○ Development of fibres
   ○ Development of resins
● Construction / Testing / Calculation
● Processes

The presentation language will be English. Deadline for paper submission (title, short abstract, speaker name and address) until 15th October 2021 to info@pultruders.com.
 
The European Pultrusion Technology Association was created in 1989 by a group of leading European pultruders with the mission of supporting the growth of the pultrusion industry by maximising external communication efforts and encouraging knowledge sharing between members. Since 2006, the association has existed under the umbrella of the AVK – Federation of Reinforced Plastics in Frankfurt, Germany. Membership of EPTA is open to all companies and individuals worldwide wishing to further the application of pultruded profiles. For further information visit http://www.pultruders.com.

08.09.2021

Indorama Mobility Group: General price increase effective October 1st 2021

The Indorama Mobility Group, a manufacturer of industrial fibers, cords and fabrics, - like other companies - is confronted with significant inflation since the beginning of the year. The global economy has gradually recovered in 2021 from the impact of the COVID-19 pandemic, but is still experiencing very volatile market conditions: The global freight remains unreliable and expensive, cost for energy and global commodities is increasing, and the increasing focus on sustainability and environmental impact is driving compliance cost upward in most part of the world.

In detail:

The Indorama Mobility Group, a manufacturer of industrial fibers, cords and fabrics, - like other companies - is confronted with significant inflation since the beginning of the year. The global economy has gradually recovered in 2021 from the impact of the COVID-19 pandemic, but is still experiencing very volatile market conditions: The global freight remains unreliable and expensive, cost for energy and global commodities is increasing, and the increasing focus on sustainability and environmental impact is driving compliance cost upward in most part of the world.

In detail:

  • Utilities: gas price has tripled in the past few months in Europe (from a level of 15 EUR/MWh in Q4’20 to 45 EUR/MWh recently), while increasing by 50% in USA
  • CO2 emissions and compliance cost: prices for CO2 certificates in Europe have almost doubled, approaching 60 EUR/ton from 30 EUR/ton at the end of last year, while regulations continue to expand the need for CO2 compensation
  • Chemicals and additives (spinfinish, dip chemicals, coating & laminating chemicals): cost have increased by 5%
  • Packaging: prices for standard packaging materials have increased by more than 30%
  • Logistic: despite our local manufacturing footprint which is not fully affected by global freight issues, the regional logistic costs are also increasing up to 20% (road transport)

Despite constant efforts to optimise the cost structure through comprehensive initiatives to improve operations, cost increases have now reached a level, the group said, that can no longer be offset and must be passed on to the market. This is a necessary step to be able to continue supplying high-quality products and services of the broad product portfolio, it said.

More information:
Indorama Mobility Group
Source:

Indorama Mobility Group

B.I.G. YARNS awarded HPR status for second European plant © Beaulieu International Group
B.I.G. YARNS awarded HPR status for second European plant.
07.09.2021

B.I.G. YARNS awarded HPR status for second European plant

  • FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
  • Completes HPR Award status for B.I.G. YARNS’ European production facilities
  • Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

  • FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
  • Completes HPR Award status for B.I.G. YARNS’ European production facilities
  • Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

Emmanuel Colchen, General Manager B.I.G. YARNS, comments: “Achieving the prestigious HPR Award recognizes the commitment of the teams at B.I.G. YARNS and the wider Beaulieu International Group to proactive risk management and contingency planning to ensure the safety and protection of our workplaces. Safeguarding property is a key element in enabling us to provide business continuity for our customers in demanding sectors like automotive, commercial contract and residential flooring.”

B.I.G. YARNS’ Komen production facility is the fifth plant at B.I.G. to receive HPR status - the highest level a plant can achieve for fire risk prevention and protection.

The Yarns division of Beaulieu International Group achieved HPR status for its other European site in Comines, France, in 2017.

30.08.2021

The Renewable Carbon Initiative RCI is joining forces

  • From fossil to renewable materials: Members advocate policy analysis and focused implementation of the renewable carbon strategy

The members of the Renewable Carbon Initiative (RCI) (www.renewable-carbon-initiative.com), founded in September 2020, have joined forces to shape the transition from the fossil to the renewable age for the chemical and materials industry. This means spreading the concept of renewable carbon and developing new value chains based on renewable carbon as a feedstock.

In the meantime, several activities have started from which future members can benefit as well. First and foremost is the kick-off to comprehensive policy analysis. What influence will forthcoming regulation have on chemicals, plastics, and other materials? When and where should the renewable carbon idea be emphasized and referred to?

The policy analysis will examine pending policies in the European Union – and a later expansion to America and Asia is planned as well.

  • From fossil to renewable materials: Members advocate policy analysis and focused implementation of the renewable carbon strategy

The members of the Renewable Carbon Initiative (RCI) (www.renewable-carbon-initiative.com), founded in September 2020, have joined forces to shape the transition from the fossil to the renewable age for the chemical and materials industry. This means spreading the concept of renewable carbon and developing new value chains based on renewable carbon as a feedstock.

In the meantime, several activities have started from which future members can benefit as well. First and foremost is the kick-off to comprehensive policy analysis. What influence will forthcoming regulation have on chemicals, plastics, and other materials? When and where should the renewable carbon idea be emphasized and referred to?

The policy analysis will examine pending policies in the European Union – and a later expansion to America and Asia is planned as well.

A particular focus will be placed on upcoming policies and regulations and how they impact renewable carbon. The members are currently deciding on where to start specifically, but questions that may be considered are: What does the new climate law and the “Fit for 55-Package” mean for chemicals and materials? What can be expected from REACH and microplastics restrictions? How relevant is the “Sustainable Products Initiative” and the coming restrictions for Green Claims? Circular Economy, Zero Pollution and Sustainable Financing are keywords of the future European landscapes, which might become very concrete for chemistry and materials in the next few years. To what extent the concept of renewable carbon for materials is considered in policy already and how it could be further introduced in future legislation are two of the main questions investigated in the working group “Policy”.

This working group is open to all members of RCI. Policy experts provide the respective analysis as a foundation, organising discussions between members of the policy group and plan meetings with policymakers to introduce the Renewable Carbon concept.

Additional working groups have been created, one with a focus on communication, the other looking at the development of a renewable carbon label. In early September, a renewable carbon community will be launched as a starting point for even more interaction between the members, to discuss strategies, create new value chains and start project consortia.

The Renewable Carbon Initiative (RCI) is a dynamic and ambitious group of interested parties. Membership numbers have now more than doubled since the launch almost a year ago, with RCI now boasting 25 members, 6 partners and over 200 supporters. It welcomes all companies that are on the way to transform their resource base from fossil to renewable.

More information:
Renewable Carbon Initiative
Source:

nova-Institut für politische und ökologische Innovation GmbH für RCI

(c) Autoneum
Claudia Güntert
27.08.2021

Autoneum appoints new Head of Corporate Communications

Claudia Güntert has been appointed Head of Corporate Communications at Autoneum as of November 1, 2021. She succeeds the Corporate Communications Head, Dr. Anahid Rickmann, who will be leaving the company per end of August 2021.

Claudia Güntert studied Jurisprudence at the University of Basel, Switzerland, as well as German and Eastern European Literature at the Universities of Basel and Zurich, Switzerland.

From 2008 to 2013, she was Marketing & Product Communications Manager at Von Roll Management AG in Wädenswil, Switzerland. She thereby gained broad experience in marketing and customer communications in the industry and a deep understanding of the industrial relations between suppliers and their customers. From 2013 until 2021, she was Head of Corporate Communications & Investor Relations at Von Roll Holding AG in Wädenswil and Breitenbach, Switzerland. In this leading position, she expanded her expertise in internal and external communication with a focus on company vision and strategy, branding, global change management, and social media presence. Claudia Güntert will report to Matthias Holzammer, CEO.

Claudia Güntert has been appointed Head of Corporate Communications at Autoneum as of November 1, 2021. She succeeds the Corporate Communications Head, Dr. Anahid Rickmann, who will be leaving the company per end of August 2021.

Claudia Güntert studied Jurisprudence at the University of Basel, Switzerland, as well as German and Eastern European Literature at the Universities of Basel and Zurich, Switzerland.

From 2008 to 2013, she was Marketing & Product Communications Manager at Von Roll Management AG in Wädenswil, Switzerland. She thereby gained broad experience in marketing and customer communications in the industry and a deep understanding of the industrial relations between suppliers and their customers. From 2013 until 2021, she was Head of Corporate Communications & Investor Relations at Von Roll Holding AG in Wädenswil and Breitenbach, Switzerland. In this leading position, she expanded her expertise in internal and external communication with a focus on company vision and strategy, branding, global change management, and social media presence. Claudia Güntert will report to Matthias Holzammer, CEO.

Dr. Anahid Rickmann leaves Autoneum at the end of August at her own request. After almost nine years of service, she has decided to take on a new professional challenge. Anahid Rickmann strategically realigned the Company's communications after it became independent in 2011 and significantly shaped Autoneum's external perception and reputation. Her particular achievements include the measurable success of external communications, brand positioning and the launch of Autoneum's corporate responsibility strategy. CEO Matthias Holzammer and the Board of Directors would like to thank Anahid Rickmann sincerely for her successful, always dedicated and loyal service to Autoneum and wish her the best for her personal and professional future.

For September and October 2021, Luzia Schoeck, Communications Manager, will act as interim Head of Corporate Communications.

More information:
Autoneum Autoneum Management AG
Source:

Autoneum

02.08.2021

EDANA and INDA: 2021 NONWOVENS STANDARD PROCEDURES

  • Harmonized Language Increases Efficiency to Communicate Globally Consistent Descriptions, Production and Testing

EDANA and INDA, the leading global nonwovens associations, jointly announce the launch of the 2021 edition of standard procedures for the nonwovens and related industries.

These Nonwovens Standard Procedures help technically define the nonwovens industry, with specifiers for the properties, composition, and specifications of its products. Offering harmonized language for the industry across the USA and Europe, and recognized by many other individual markets, the procedures offer a way for the nonwovens industry to communicate both across the globe, and within the supply chain to ensure that product properties can be consistently described, produced, and tested.

The harmonized methods contained in the Nonwovens Standard Procedures (NWSP) edition include 107 individual test procedures and guidance documents to support applications across the nonwovens and related industries, and are available on both www.inda.org and www.edana.org.

  • Harmonized Language Increases Efficiency to Communicate Globally Consistent Descriptions, Production and Testing

EDANA and INDA, the leading global nonwovens associations, jointly announce the launch of the 2021 edition of standard procedures for the nonwovens and related industries.

These Nonwovens Standard Procedures help technically define the nonwovens industry, with specifiers for the properties, composition, and specifications of its products. Offering harmonized language for the industry across the USA and Europe, and recognized by many other individual markets, the procedures offer a way for the nonwovens industry to communicate both across the globe, and within the supply chain to ensure that product properties can be consistently described, produced, and tested.

The harmonized methods contained in the Nonwovens Standard Procedures (NWSP) edition include 107 individual test procedures and guidance documents to support applications across the nonwovens and related industries, and are available on both www.inda.org and www.edana.org.

The 2021 edition includes updated or modified procedures with a numbering structure that makes the document intuitive to search and use. Additionally, each method also includes a page to summarize and track relevant changes made to the document. In an effort to make all methods more consistent, each one is now presented in a format building on the International Standards Organisation (ISO) template, facilitating any future possible submission to ISO in an effort to become a recognized international standard or technical specification.

As in previous editions, the table of contents for the Nonwoven Standard Procedures document includes references to existing related ISO standards, which makes it easier for technicians to choose the most relevant procedure or methods to apply to their product.

Source:

INDA / EDANA

(c) Autoneum
14.07.2021

Autoneum: Carpets even more eco-friendly

Autoneum carpet systems already meet high standards of sustainable mobility due to their high content of recycled fibers. Thanks to an alternative backcoating (ABC) process, Autoneum carpets are now becoming even more environmentally friendly: By replacing the latex commonly used in standard backcoatings with thermoplastic material, the recyclability of carpets at the end of product life is further  improved. In addition, the innovative manufacturing process greatly reduces water and energy consumption and thus CO2 emissions in production.

Autoneum carpet systems already meet high standards of sustainable mobility due to their high content of recycled fibers. Thanks to an alternative backcoating (ABC) process, Autoneum carpets are now becoming even more environmentally friendly: By replacing the latex commonly used in standard backcoatings with thermoplastic material, the recyclability of carpets at the end of product life is further  improved. In addition, the innovative manufacturing process greatly reduces water and energy consumption and thus CO2 emissions in production.

Lightweight, textile-based carpet technologies such as Di-Light or Relive-1 significantly improve the environmental performance of carpets. For example, Di-Light-based carpets consist of up to 97% recycled PET; aside from that, they are around 20% lighter than conventional needlepunch carpets, thus contributing to lower fuel consumption and CO2 emissions from vehicles. In addition, Autoneum needlepunch carpets are now even more sustainable thanks to the innovative ABC process, which uses a thermoplastic adhesive instead of latex in the backcoating: Unlike latex, thermoplastic adhesives can be heated and melted down together with the carpet components made of pure PET at the end of the product life cycle, which facilitates recycling considerably. Furthermore, since the fibers of the thermoplastic mono-material are easier to open, carpet cut-outs can be reclaimed more easily, thereby reducing the consumption of natural resources as well as waste volumes and thus CO2 emissions. The environmental  performance of Autoneum’s needlepunch carpets, which already contain a high proportion of recycled PET, is thus further improved.

Moreover, backcoatings without latex improve the sustainability of carpets not only thanks to better recyclability at the end of the product life cycle. Since the application of the thermoplastic adhesive using the innovative ABC process consumes significantly less energy than the production of latexbased backcoatings and does not require any water at all, the environmental impact can already be minimized in the manufacturing process. Additionally, thermoplastic adhesives developed in-house by Autoneum will open up new possibilities in the future for adapting backcoatings to the individual needs of vehicle manufacturers in terms of their acoustic performance, stiffness and abrasion resistance.

Models from various customers in Europe and North America are already equipped with latex-free needlepunch carpets from Autoneum. In the near future, backcoatings with thermoplastic adhesives will also be used for Autoneum’s tufted carpets. Production of the new, even more sustainable generation of tufted carpets is scheduled to start in early 2022.

08.07.2021

ECHA: Candidate List updated with eight hazardous chemicals

Some of the newly added substances are used in consumer products such as cosmetics, scented articles, rubber and textiles. Others are used as solvents, flame retardants or to manufacture plastics products. Most have been added to the Candidate List because they are hazardous to human health as they are toxic for reproduction, carcinogenic, respiratory sensitisers or endocrine disruptors.

Companies must follow their legal obligations and ensure the safe use of these chemicals. They also have to notify ECHA under the Waste Framework Directive if their products contain substances of very high concern. This notification is submitted to ECHA’s SCIP database and the information will later be published on the Agency’s website.

Some of the newly added substances are used in consumer products such as cosmetics, scented articles, rubber and textiles. Others are used as solvents, flame retardants or to manufacture plastics products. Most have been added to the Candidate List because they are hazardous to human health as they are toxic for reproduction, carcinogenic, respiratory sensitisers or endocrine disruptors.

Companies must follow their legal obligations and ensure the safe use of these chemicals. They also have to notify ECHA under the Waste Framework Directive if their products contain substances of very high concern. This notification is submitted to ECHA’s SCIP database and the information will later be published on the Agency’s website.

Background
The Candidate List includes substances of very high concern that may have serious effects on our health or the environment. These substances may be placed on the Authorisation List in the future, which means that companies would need to apply for permission to continue using them. The Candidate List has now 219 entries – some of these cover groups of chemicals so the overall number of impacted chemicals is higher.
 
Under the REACH Regulation, companies may have legal obligations when their substance is included – either on its own, in mixtures or in articles – in the Candidate List. Any supplier of articles containing a Candidate List substance above a concentration of 0.1 % weight by weight has to give sufficient information to their customers and consumers to allow safe use.
 
Importers and producers of articles containing a Candidate List substance have six months from the date of its inclusion in the list (8 July 2021) to notify ECHA. Suppliers of substances on the Candidate List (supplied either on their own or in mixtures) have to provide their customers with a safety data sheet.
 
As of 5 January 2021, suppliers of articles on the EU market containing Candidate List substances in a concentration above 0.1% weight by weight must notify these articles to ECHA’s SCIP database. This duty comes from the Waste Framework Directive.
 
More information on these obligations and related tools are available here.

Source:

European Chemicals Agency

Mimaki supports Printers Worldwide in Global Innovation Days Event (c) EMEA, Mimaki Europe B.V
17.06.2021

Mimaki supports Printers Worldwide in Global Innovation Days Event

Mimaki held their global event Innovation Days (2-4 June 2021) to great success. The event brought together printers, journalists and experts from Mimaki Japan, USA and Europe, to nurture innovation in the sign graphics, industrial, textile and 3D markets and drive success within the industry. The global event also introduced the market to Mimaki’s recent product releases, the JFX550, JFX600 and SUJV-160.

In a week of webinars, workshops, demonstrations, and networking events, over 1,300 attendees from all across the world logged in to participate, with the demonstration of UJV100 and JV100 printers, 3D printing workshop and car wrap workshop being the most popular events. As a first of its kind for Mimaki, visitors were able to speak with regional Mimaki representatives, gaining greater insight into the global printing industry as it recovers from the COVID-19 pandemic.

Mimaki held their global event Innovation Days (2-4 June 2021) to great success. The event brought together printers, journalists and experts from Mimaki Japan, USA and Europe, to nurture innovation in the sign graphics, industrial, textile and 3D markets and drive success within the industry. The global event also introduced the market to Mimaki’s recent product releases, the JFX550, JFX600 and SUJV-160.

In a week of webinars, workshops, demonstrations, and networking events, over 1,300 attendees from all across the world logged in to participate, with the demonstration of UJV100 and JV100 printers, 3D printing workshop and car wrap workshop being the most popular events. As a first of its kind for Mimaki, visitors were able to speak with regional Mimaki representatives, gaining greater insight into the global printing industry as it recovers from the COVID-19 pandemic.

A stand-out attraction of the event was the recently released 100 Series, which is priced affordably to allow printers entry into different markets, as many look to expand their portfolio in these uncertain times. The new JFX600-2513 and JFX550-2513, which debuted a few weeks prior at virtual drupa, similarly are higher end but still affordable printers, when compared to other large format UV flatbed machines in its class. 3D full colour print technology also featured heavily in the event, as Mimaki explored the exciting propositions it opens up in different markets and how the brand continues to extend the reach and accessibility of cutting-edge 3D technologies with its upcoming 3DUJ-2207 printer.

Mr. Kazuaki Ikeda, President of Mimaki Engineering commented, “I’d like to extend my thanks to everyone who joined us during this exciting new virtual event. During the pandemic, carrying on innovating has been central to Mimaki’s objectives, with eight new products having been released since October, and even more scheduled to come out over the course of this year. I hope that we can soon all meet at in-person events, once it’s safe to do so, but until then I’m excited to see the results of the continued collaboration and innovation of print industry that we saw in our Innovation Days event.”

Source:

EMEA, Mimaki Europe B.V

Sappi: New Sublimation Paper for Textile Industry (c) Sappi
08.06.2021

Sappi: New Sublimation Paper for Textile Industry

Sappi offers Transjet Tacky Industrial, a coated dye sublimation paper for digital transfer printing, specially developed for high-speed inkjet printing on highly elastic textiles. Also new is the uncoated dye sublimation paper Basejet, which has been developed for light designs for high-speed digital printing of fashion and home textiles.

  • Transjet Tacky Industrial: Immediate tack effect, high ink transfer, fast ink drying; no ghosting on elastic textiles thanks to reversible tack
  • Basejet: Consistent print quality for light designs, fast ink-drying, very fast transfer process

Transjet Tacky Industrial enables highly elastic fabrics to be printed on industrial high-speed machines that work with a higher glycol content, such as printheads from Kyocera. The paper is first printed with the desired image or pattern which is then transferred to the elastic polyester fabric by means of heat and pressure.

Sappi offers Transjet Tacky Industrial, a coated dye sublimation paper for digital transfer printing, specially developed for high-speed inkjet printing on highly elastic textiles. Also new is the uncoated dye sublimation paper Basejet, which has been developed for light designs for high-speed digital printing of fashion and home textiles.

  • Transjet Tacky Industrial: Immediate tack effect, high ink transfer, fast ink drying; no ghosting on elastic textiles thanks to reversible tack
  • Basejet: Consistent print quality for light designs, fast ink-drying, very fast transfer process

Transjet Tacky Industrial enables highly elastic fabrics to be printed on industrial high-speed machines that work with a higher glycol content, such as printheads from Kyocera. The paper is first printed with the desired image or pattern which is then transferred to the elastic polyester fabric by means of heat and pressure.

Sublimation paper for the textile industry
The new dye sublimation paper offers many benefits for the textile industry, which frequently has to adapt to changing trends. As it is suitable for use on high-speed digital printers, significantly more designs can be printed in the same time than was previously possible on plotters. Thanks to a special heat-reactive coating, the paper adheres to highly stretchable content, while the reversible tack prevents ghosting and textile shrinkage. Transjet Tacky
Industrial has a high ink load capacity so the print can be better accentuated due to strong colour saturation. The design remains clearly visible when the fabric is stretched to its maximum, which is often the case with sportswear in particular.

Basejet specially for light designs
Sappi has also added the Basejet uncoated dye sublimation paper to its portfolio, an additional solution for the digital printing of fashion and home textiles in consistent print quality. The uncoated dye sublimation paper is intended in particular for light designs and cost-driven production processes.

Source:

Sappi Europe

Sappi: New Production Site for Labels (c) Sappi Europe
28.05.2021

Sappi: New Production Site for Labels

The modern site in Gratkorn is one of the largest paper mills in Europe. With the portfolio expansion, Sappi will meet customer demands for base papers for non-wet-strength wet-glue and self-adhesive labels and keep pace with market growth. With more than 400 years of experience in paper production, the site in Gratkorn is renowned for high-quality, multi-coated fine papers used for graphical applications. Available capacity is being expanded gradually to include the production of Parade Label papers alongside existing graphical grades.

New products in the pipeline
The site in Gratkorn offers another benefit. The higher production capacity will enable the innovation leader Sappi to further expand its portfolio of label papers and open up new segments. This was previously not possible due to limited capacity at the existing locations. Michael Bethge, Sales Director Speciality Papers at Sappi, commented "In June of this year, we will launch Parade Label Pro in grammages of 80 and 90 g/m² following successful testing processes carried out internally and externally"

The modern site in Gratkorn is one of the largest paper mills in Europe. With the portfolio expansion, Sappi will meet customer demands for base papers for non-wet-strength wet-glue and self-adhesive labels and keep pace with market growth. With more than 400 years of experience in paper production, the site in Gratkorn is renowned for high-quality, multi-coated fine papers used for graphical applications. Available capacity is being expanded gradually to include the production of Parade Label papers alongside existing graphical grades.

New products in the pipeline
The site in Gratkorn offers another benefit. The higher production capacity will enable the innovation leader Sappi to further expand its portfolio of label papers and open up new segments. This was previously not possible due to limited capacity at the existing locations. Michael Bethge, Sales Director Speciality Papers at Sappi, commented "In June of this year, we will launch Parade Label Pro in grammages of 80 and 90 g/m² following successful testing processes carried out internally and externally"

Source:

Sappi Europe

Mimaki appoints Mark Sollman as Product Manager EMEA (c) Mimaki Europe BV
Mark Sollman, Product Manager EMEA
21.05.2021

Mimaki appoints Mark Sollman as Product Manager EMEA

Mimaki, a manufacturer of inkjet printers and cutting systems, has today announced that long-standing employee, Mark Sollman, will be appointed to the role of Product Manager, EMEA on the 1st July 2021. Sollman has been with Mimaki for over 15 years and as such, his extensive knowledge of the business and its diverse product portfolio makes him the clear choice for this esteemed management position.

Sollman will be succeeding Bert Benckhuysen. After four years with Mimaki, Benckhuysen has decided to take on a new challenge as Business Development Director at Colourama. A valued Mimaki customer, Colourama is a company Benckhuysen knows well, having also previously been employed as Production Manager at this thriving Polish textile printer.

Mimaki, a manufacturer of inkjet printers and cutting systems, has today announced that long-standing employee, Mark Sollman, will be appointed to the role of Product Manager, EMEA on the 1st July 2021. Sollman has been with Mimaki for over 15 years and as such, his extensive knowledge of the business and its diverse product portfolio makes him the clear choice for this esteemed management position.

Sollman will be succeeding Bert Benckhuysen. After four years with Mimaki, Benckhuysen has decided to take on a new challenge as Business Development Director at Colourama. A valued Mimaki customer, Colourama is a company Benckhuysen knows well, having also previously been employed as Production Manager at this thriving Polish textile printer.

Source:

Mimaki Europe B.V / Bespoke

(c) Teijin Carbon Europe GmbH
19.05.2021

Teijin Carbon produces new thermoplastic PPS-Tape

Teijin Carbon Europe introduces a new thermoplastic carbon fiber tape (TPUD) based on PPS. The new Tenax™ TPUD with PPS matrix allows entry in new cost-sensitive markets while offering the typical TPUD advantages like high resistance to chemicals and solvents, low flammability, storage or shipping at room temperature and recyclability.  

Due to its flame retardant properties and low smoke emission, it can be used in interior applications of aircraft or rail vehicles, among others. The maximum continuous operating temperature is up to 220 °C. Very low water absorption, excellent creep resistance even at elevated temperatures and high dimensional stability round off the property portfolio of this new TPUD. It is therefore also suitable for demanding applications in the aerospace, oil & gas, sporting goods or industrial sectors, while remaining cost-effective. These properties make the product perfect for highly automated processing routes such as ATL or AFP in combination with overmolding for complex geometries. Production start for the Tenax™ TPUD with PPS matrix is the first quarter in 2021.

Teijin Carbon Europe introduces a new thermoplastic carbon fiber tape (TPUD) based on PPS. The new Tenax™ TPUD with PPS matrix allows entry in new cost-sensitive markets while offering the typical TPUD advantages like high resistance to chemicals and solvents, low flammability, storage or shipping at room temperature and recyclability.  

Due to its flame retardant properties and low smoke emission, it can be used in interior applications of aircraft or rail vehicles, among others. The maximum continuous operating temperature is up to 220 °C. Very low water absorption, excellent creep resistance even at elevated temperatures and high dimensional stability round off the property portfolio of this new TPUD. It is therefore also suitable for demanding applications in the aerospace, oil & gas, sporting goods or industrial sectors, while remaining cost-effective. These properties make the product perfect for highly automated processing routes such as ATL or AFP in combination with overmolding for complex geometries. Production start for the Tenax™ TPUD with PPS matrix is the first quarter in 2021.

For almost 10 years, unidirectional tapes (TPUD) have been manufactured from carbon fibers and thermoplastics in Heinsberg, Germany. The semi-finished products have so far been offered with PEEK or PAEK – and PPS is now added to the list of available matrixes. PPS allows a lower process temperature compared to PEEK or PAEK. For the industrial market in particular, increasing the production rate to make processes more cost-efficient is an opportunity.

Source:

Teijin Carbon Europe GmbH

Mimaki: Futterstoffe mit Mehrwert durch Digitaldruck (c) Gi.Tessil Foderami
11.05.2021

Mimaki: Futterstoffe mit Mehrwert durch Digitaldruck

Das auf die Herstellung von Futterstoffen „Made in Italy“ spezialisierte Unternehmen Gi.Tessil Foderami erweiterte seinen Maschinenpark aus 28 Jacquard-Webmaschinen um ein erstes digitales Textildrucksystem TX300P-1800B von Mimaki, um einen Qualitätsvorsprung gegenüber den Mitbewerbern zu erzielen.

Produkt- und Servicequalität sind das Unterscheidungsmerkmal von Gi.Tessil Foderami, einem Spezialisten für Futterstoffe „Made in Italy“. Durch den Einsatz modernster Technologien und nachhaltiger Rohstoffe ist es dem Unternehmen gelungen, sich als einer der Hauptanbieter von Jacquard-Futterstoffen in Europa zu etablieren.

Die Unternehmensphilosophie, die auf die Erprobung neuer, innovativer Technologien zur Wahrung höchster Standards ausgerichtet ist, hat nun zu einem weiteren großen Schritt nach vorn geführt – der Investition in digitalen Textildruck.

Das auf die Herstellung von Futterstoffen „Made in Italy“ spezialisierte Unternehmen Gi.Tessil Foderami erweiterte seinen Maschinenpark aus 28 Jacquard-Webmaschinen um ein erstes digitales Textildrucksystem TX300P-1800B von Mimaki, um einen Qualitätsvorsprung gegenüber den Mitbewerbern zu erzielen.

Produkt- und Servicequalität sind das Unterscheidungsmerkmal von Gi.Tessil Foderami, einem Spezialisten für Futterstoffe „Made in Italy“. Durch den Einsatz modernster Technologien und nachhaltiger Rohstoffe ist es dem Unternehmen gelungen, sich als einer der Hauptanbieter von Jacquard-Futterstoffen in Europa zu etablieren.

Die Unternehmensphilosophie, die auf die Erprobung neuer, innovativer Technologien zur Wahrung höchster Standards ausgerichtet ist, hat nun zu einem weiteren großen Schritt nach vorn geführt – der Investition in digitalen Textildruck.

Digitaldruck als Weichenstellung
Nach der Sichtung mehrerer Digitaldrucklösungen auf dem Markt fiel die Wahl auf das TX300P-1800B von Mimaki – ein Textildirektdrucksystem mit automatisiertem Druckdeckenvorschub und Eignung für Pigmenttinten, das Gi.Tessil Foderami bei Mimaki Bompan Textile erwarb

Nach den ersten Monaten mit dem Mimaki TX300P-1800B zieht Paolo Giamberini, Eigentümer und CEO, eine Erfolgsbilanz: „Im Hinblick auf das Anwendungsspektrum haben wir unsere ursprünglichen Ziele nicht nur erreicht, sondern sogar noch übertroffen. Neben dem On-Demand-Druck auf eigene Stoffe können wir auch von den Kunden gelieferte Materialien mit ganz ähnlichen Motiven versehen – und dies in völlig neuen Einsatzbereichen, wie bei den derzeit so gefragten Schutzmasken.“ So ergeben sich beachtliche Ertragschancen und Zukunftspotenziale, die Giamberini wie folgt resümiert: „Das Digitaldrucksystem Mimaki TX300P-1800B ist äußerst flexibel und vielseitig. Sein Produktionspotenzial von schätzungsweise 14.000 Metern jährlich haben wir noch nicht einmal voll ausgeschöpft, was im Wesentlichen an zwei Faktoren liegt – der Zeit, die erforderlich ist, um unsere Kunden an diese innovative Technologie heranzuführen, und dann natürlich auch der COVID-19-Krise, die das gesamte Projekt verzögert hat. So konnten wir unser Musterbuch noch gar nicht offiziell präsentieren. Aber jede Krise geht vorüber, und wenn es so weit ist, werden wir wohl schon bald eine weitere Investition dieser Art in Erwägung ziehen.“

Source:

Mimaki Europe BV

Uncoated, ultra-bright virgin fibre liner with exceptional feel and colour reproduction (c) Sappi
Fusion Nature Blog
20.04.2021

Uncoated, ultra-bright virgin fibre liner with exceptional feel and colour reproduction

Sappi is expanding its product range for corrugated board applications with Fusion Nature Plus.

With Fusion Nature Plus, Sappi is launching an uncoated, fully bleached and completely recyclable virgin fibre liner. The company provides a unique variety of packaging and speciality papers. The specialist in paper-based solutions also offers a wide range of products in relation to labels. Fusion Nature Plus offers excellent printing results in flexographic, digital and offset printing processes.

  • Ultra-bright, uncoated virgin fibre paper with excellent printing results
  • Ideal for attractive corrugated board as well as premium shopping bags
  • Can be used as topliner, liner or fluting
  • Available in grammages of 80 to 130 g/m²

The virgin fibre liner is based on the concept of the successful Fusion Topliner. In contrast to the double-coated Fusion Topliner, Fusion Nature Plus has a natural, uncoated surface with a more tactile feel, in response to the growing market appetite for this type of product. The liner is also provided in very low grammages.

Sappi is expanding its product range for corrugated board applications with Fusion Nature Plus.

With Fusion Nature Plus, Sappi is launching an uncoated, fully bleached and completely recyclable virgin fibre liner. The company provides a unique variety of packaging and speciality papers. The specialist in paper-based solutions also offers a wide range of products in relation to labels. Fusion Nature Plus offers excellent printing results in flexographic, digital and offset printing processes.

  • Ultra-bright, uncoated virgin fibre paper with excellent printing results
  • Ideal for attractive corrugated board as well as premium shopping bags
  • Can be used as topliner, liner or fluting
  • Available in grammages of 80 to 130 g/m²

The virgin fibre liner is based on the concept of the successful Fusion Topliner. In contrast to the double-coated Fusion Topliner, Fusion Nature Plus has a natural, uncoated surface with a more tactile feel, in response to the growing market appetite for this type of product. The liner is also provided in very low grammages.

Fusion Nature Plus enhances brand appearance

Brand owners, corrugated board processors, manufacturers of display cartons and folding cartons as well as designers all benefit from the versatility of the new Fusion Nature Plus. In contrast to conventional uncoated liner papers, the material offers high brightness, brilliant colour reproduction and consistently high quality. These features make the product the perfect choice for corrugated board or solid board packaging, where a very bright appearance is needed for topliners, inner liners and corrugating applications. Whether used as an inlay in cosmetics or confectionery packaging, or as a liner in shipping packaging to ensure an exceptional unboxing experience, Fusion Nature Plus is called upon wherever an enhanced appearance is desired.

Another area of application is paper carrier bags, where uncoated paper qualities are often preferred.

Fusion Nature Plus is ideally suited to a range of printing processes: the product achieves outstanding results in flexographic and offset printing. The pre-treated surface and high brightness offer clear advantages with regard to primer requirements and print behaviour, especially for inkjet-based digital printing. Bernd Gelder, Head of Sales Containerboard at Sappi Europe: ‘With its exceptional print quality and impressive colour reproduction, Fusion Nature Plus particularly appeals to packaging customers who value a natural look and feel in paper. The response from the market, in which packaging based on corrugated board still needs to take on a bigger role, is enormous, of course, with the result that we have succeeded in completing a number of interesting end applications and customer projects with Fusion Nature Plus shortly after market launch.’

Virgin fibre vital for recycling

In continuous recycling use, fiber that has already been recycled is subject to a progressive weakening of quality, resulting in a weakness in the products that incorporate them, but also, crucially, over time they will ultimately degrade to a point where they become unrecoverable. As a result, a certain amount of virgin fibre needs to be introduced into the cycle on a regular basis. Without continuous virgin fibre contribution to the pulp cycle, recycled producers will in the end run out of raw material. The premium virgin fibre liner Fusion Nature Plus from Sappi plays an important role here in maintaining the quality of the recycling substrate.

Thanks to the central location of Sappi’s production site in Ehingen, Fusion Nature Plus can be supplied quickly throughout Europe. The shorter transportation distances reduce transport related fossil emissions and protect the environment. The shorter production cycles in turn ensure high availability and rapid supply.

Fusion Nature Plus is currently available in six grammages from 80 to 130 g/m² in both sheet and roll form. Sappi can also provide Fusion Nature Plus with FSC or PEFC certificates on request.

Decision SA and Carboman Group Announce New Direct Mould Tooling Technology for Aerospace (c) Decision SA.
new direct mould tooling technology
08.03.2021

Decision SA and Carboman Group Announce New Direct Mould Tooling Technology for Aerospace

Decision SA, part of the leading European composites consortium, Carboman Group, and a specialist in the development, prototyping and production of large composite structures, is proud to announce a new direct mould tooling technology for aerospace.  Decision’s latest tooling solution provides OEMs and manufacturers with short lead times for highly stable direct moulds for series production both in and outside of the autoclave at temperatures of up to 180˚C.

Decision and Carboman recently delivered the first customer moulds using the new technology, providing a tooling glass prepreg, stainless-steel backed direct female mould tool created for the series production of a Class 3 fairing to a leading European aerospace OEM. Decision has immediate availability and capacity for similar tooling projects with lead times currently as short as six to eight weeks.

Decision SA, part of the leading European composites consortium, Carboman Group, and a specialist in the development, prototyping and production of large composite structures, is proud to announce a new direct mould tooling technology for aerospace.  Decision’s latest tooling solution provides OEMs and manufacturers with short lead times for highly stable direct moulds for series production both in and outside of the autoclave at temperatures of up to 180˚C.

Decision and Carboman recently delivered the first customer moulds using the new technology, providing a tooling glass prepreg, stainless-steel backed direct female mould tool created for the series production of a Class 3 fairing to a leading European aerospace OEM. Decision has immediate availability and capacity for similar tooling projects with lead times currently as short as six to eight weeks.

With no traditional plug or mould pattern required, Decision’s direct mould process starts with the group’s engineers selecting a material combination for the tool surface and support structure that will provide the optimum match between the coefficient of thermal expansion (CTE) of the mould and the composite part to be processed.  The CNC machined composite face sheet is supported by a stress-relieved metallic or composite backing structure before final post curing and machining is completed. The principal benefit of this novel approach, aside from removing the need for costly and time-consuming plug production, is the production accuracy delivered by the closely matched CTE of the mould tool and the finished composite part.

The autoclaved composite tool surface is not only extremely dimensionally stable up to processing temperatures of 180˚C, but it can also be configured with additional metallic inserts or fixtures if required.  

Produced in an EN 9100:2018 controlled production environment, and with CMM checks before and after machining, the new direct composite tools have dimensional tolerances of +/-0.2mm.  The available tooling dimensional envelope is currently defined by Decision’s 2200mm x 6000mm autoclave.

“With our new direct tooling technology, we are able to combine the highest technical standards in dimensional accuracy and thermal stability with extremely short lead times.  Decision and Carboman Groups’ combined mission has always been to develop the construction methods for tomorrow’s composite structures, and we believe that this tooling solution will allow our customers to accelerate the implementation of the next generation of high-performance carbon fibre aerostructures and components” Grégoire Metz, Managing Director, Decision SA.

Source:

Decision SA.

Rafa's Textiles Grows On-Demand Production Business with Kornit Digital (c) Kornit Digital
23.02.2021

Rafa's Textiles Grows On-Demand Production Business with Kornit Digital

Kornit Digitala announced Valencia, Spain-based Rafa’s Textiles has acquired a third Kornit Avalanche HD6 system for single-step, on-demand direct-to-garment (DTG) digital production, spurred by business growth resulting from increased e-commerce engagement in the past year.

Rafa’s Textiles personalizes t-shirts and all kinds of clothing with screen printing, direct (digital) printing, silkscreen transfer, sublimation, and embroidery, serving European-based B2B clients who sell via web stores, both integrated with Amazon and independently. There are no colour limitations, and handfeel and durability are retail-quality. On a typical day, they will handle 200-300 print-on-demand orders, though those numbers spike with key holidays; this past Christmas, for example, saw a peak of 1,300 orders in a single day. Regardless of volume, with digital production capabilities in house, these orders are printed individually within 24 hours and shipped directly to all customers.

Kornit Digitala announced Valencia, Spain-based Rafa’s Textiles has acquired a third Kornit Avalanche HD6 system for single-step, on-demand direct-to-garment (DTG) digital production, spurred by business growth resulting from increased e-commerce engagement in the past year.

Rafa’s Textiles personalizes t-shirts and all kinds of clothing with screen printing, direct (digital) printing, silkscreen transfer, sublimation, and embroidery, serving European-based B2B clients who sell via web stores, both integrated with Amazon and independently. There are no colour limitations, and handfeel and durability are retail-quality. On a typical day, they will handle 200-300 print-on-demand orders, though those numbers spike with key holidays; this past Christmas, for example, saw a peak of 1,300 orders in a single day. Regardless of volume, with digital production capabilities in house, these orders are printed individually within 24 hours and shipped directly to all customers.

For Rafa’s Textiles, implementing Kornit’s digital production technology was simply the best means to meeting the challenges and capitalizing on new opportunities of the e-commerce age. Sergio attributes his business’s success despite recent market disruptions to their focus on e-commerce, which aligns with buyers’ increased preference for web-based purchasing.

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates (c) MaruHachi
16.02.2021

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

Since 2017, MaruHachi Group is active in the European market in cooperation with Dr. Michael Effing,the CEO of AMAC GmbH, who advises and supports the company strategically. The established, family-owned MaruHachi Group has a strong history in automotive and medical textiles and has been active in the innovative composites market for more than 15 years.

Toshi Sugahara, CEO of MaruHachi: “For many years, we have already been cooperating with domestic and international partners on high-demand applications and therefore, MaruHachi decided now to invest over 1 million EUR in this new line in phase 1, including a funding participation from the Japanese government NEDO. New developments in phase 2 will be be undertaken by end of 2021 on the downstream technologies like the automated preforming and consolidation. With our new products, we want to contribute to significant weight reductions of the final products, thus improve energy efficiency while offering a cost-efficient and high-quality solution.”

Dr. Effing, CEO of AMAC GmbH confirms: „The focus on the niche of high-temperature products based on PPS and PEEK allows MaruHachi on very demanding high-end applications such as structural frames on space and aircrafts, aircraft seats or engine components etc. The tapes are fully recyclable and can be processed e.g. with high-speed with laser-based tape placement machines and robots.”

Source:

AMAC GmbH

Kornit Wins 2020 EDP Award for its NeoPigment™ Robusto Softener (c) Kornit Digital
05.02.2021

Kornit Wins 2020 EDP Award for its NeoPigment™ Robusto Softener

Kornit Digital is named among 29 winners of the 2020 EDP Awards, presented by the European Digital Press Association (EDP). The company’s NeoPigment™ Robusto Softener solution, which ensures superior hand feel for substrates imprinted using the Kornit Presto system for roll-to-roll, direct-to-fabric digital production, was selected “Best Coating and Varnish” in the Consumables category.

Kornit Digital is named among 29 winners of the 2020 EDP Awards, presented by the European Digital Press Association (EDP). The company’s NeoPigment™ Robusto Softener solution, which ensures superior hand feel for substrates imprinted using the Kornit Presto system for roll-to-roll, direct-to-fabric digital production, was selected “Best Coating and Varnish” in the Consumables category.

Kornit’s Softener solution is applied seamlessly during the printing process. No additional time, labor, or equipment is needed, and most importantly, it is a sustainable solution carrying Eco Passport certification and GOTS verification.
“Kornit Presto with Softener is changing the game for on-demand production, making pigment-based digital print a serious contender for even the most demanding fashion houses,” says Chris Govier, KDEU Managing Director. “Kornit is proud to be recognized for its innovations, and we strive to continue exceeding the market’s demands for efficient, eco-friendly, profitable solutions regardless of the new trends and challenges facing the textile industry.”