From the Sector

Reset
14 results
Photo: Archroma
15.12.2023

Archroma unveils SuperSystems+ at ChromaTexChem 2023

Archroma is bringing its most impactful planet-conscious innovations, including SuperSystems+, to ChromaTexChem 2023 in Mumbai from December 19-20.

Super Systems+ is a new set of end-to-end systems that combine processing solutions and intelligent effects for the entire textile processing workflow, from sizing to finishing. Developed for different end-use segments – from blue and colored denim to performance athletic wear, bottom weights, towels and sheeting – Super Systems+ aims to empower fashion and textile brands and mills to add value to their products while they deliver measurable environmental impact and enhance production efficiency.

Archroma is bringing its most impactful planet-conscious innovations, including SuperSystems+, to ChromaTexChem 2023 in Mumbai from December 19-20.

Super Systems+ is a new set of end-to-end systems that combine processing solutions and intelligent effects for the entire textile processing workflow, from sizing to finishing. Developed for different end-use segments – from blue and colored denim to performance athletic wear, bottom weights, towels and sheeting – Super Systems+ aims to empower fashion and textile brands and mills to add value to their products while they deliver measurable environmental impact and enhance production efficiency.

Super Systems+ leverages the industry’s broadest product portfolio and authentic evidence-based data to support informed decision making. It is supported by The SafeEdge by Archroma, an online portal that gives Archroma customers and brands real-time access to product-related regulatory and compliance certifications and information, as well as the Archroma ONE WAY Impact Calculator, a process simulation and calculation tool designed and used by our textile processing experts to provide our customers and partners with an accurate estimate of the process costs, resource utilization, effluent discharge quality, and CO2 emissions of the existing production process and of the newly evaluated system. These help them to select solutions that meet their performance requirements and deliver against significant sustainability targets.

Source:

Archroma

25.04.2022

Global Organic Textile Standard (GOTS) seeks public input for standard revision

The worldwide leading textile processing standard for organic fibres, Global Organic Textile Standard (GOTS), seeks public input as it begins the revision process for GOTS standard version 7.0.

As a solution for sustainability-related challenges in textile processing, GOTS sets strict and binding requirements regarding ecological and social parameters. These are updated every three years in an open and transparent revision process which fosters constant progress towards the development of better textile processing methods. In this process of continuous improvement, GOTS collaborates with all relevant international stakeholders, including the textile and apparel industry, chemical suppliers, organic farming and environmental organisations, workers' rights groups and labour unions, to ensure ongoing relevance and account for changes in the industry.

The initial period of public input runs from 14 April through 12 June. During this phase, all interested parties, including industry representatives, NGO’s and consumers, are encouraged to participate by submitting comments, feedback, and ideas through GOTS’s online portal.

The worldwide leading textile processing standard for organic fibres, Global Organic Textile Standard (GOTS), seeks public input as it begins the revision process for GOTS standard version 7.0.

As a solution for sustainability-related challenges in textile processing, GOTS sets strict and binding requirements regarding ecological and social parameters. These are updated every three years in an open and transparent revision process which fosters constant progress towards the development of better textile processing methods. In this process of continuous improvement, GOTS collaborates with all relevant international stakeholders, including the textile and apparel industry, chemical suppliers, organic farming and environmental organisations, workers' rights groups and labour unions, to ensure ongoing relevance and account for changes in the industry.

The initial period of public input runs from 14 April through 12 June. During this phase, all interested parties, including industry representatives, NGO’s and consumers, are encouraged to participate by submitting comments, feedback, and ideas through GOTS’s online portal.

“We are looking forward to receiving input from stakeholders around the world for GOTS version 7.0. This open call for feedback is part of what keeps our certification requirements up-to-date with the most cutting-edge developments in the industry,” says GOTS Managing Director Rahul Bhajekar.

Beginning in 2022, the revision process will follow the newly developed Standard Setting Procedure, which provides for the constitution of a Standard Revision Committee (SRC) for each revision. This group will serve as the pivotal force behind decisions about the revisions. The SRC consists of experts from different stakeholder groups, including associations, organisations, companies and individuals. All input received by June 12 will be carefully considered by the SRC as well as compiled and made public for an additional 30-day consultation period later this year. All drafts of the standard will also be made public. GOTS standard version 7.0 will be finalised in early 2023, and will be available on the GOTS website.

The timeline for the revision to GOTS version 7.0 is as follows:

  1. Constitution of GOTS SRC- April 2022
  2. Release of first revision draft for public consultation - 14 April 2022
  3. First public consultation period - 60 days (April 14 to June 12)
  4. Deliberations by the SRC on input received - May to August 2022
  5. Release of second revision draft for public consultation - September 2022
  6. Second public consultation period - 30 days from release
  7. Deliberations by the SRC on input received - October to November 2022
  8. Finalisation of GOTS version 7.0 - February 2023
  9. Release of GOTS version 7.0 - March 2023
More information:
GOTS revision stakeholder
Source:

GOTS

24.02.2022

VDMA textile machinery webinar on sustainable dyeing involved Monforts, DyStar® and Goller

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes at a temperature of between 120-130°C and a relative humidity volume of 25-30%.

Benefits
The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step.

Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

Complementary services and systems
Complementing the Monforts presentation during the webinar, Bertram Seuthe, Global Business Development Manager at DyStar, outlined the importance of specific Levafix® /Remazol® reactive dyes and Dianix® disperse dyes for sustainable dyeing processes such as Econtrol®, Cadira® Continuous and CPB knit. In these processes Sera® auxiliaries are also employed for optimised wash-off results.

Guido Seiler, Area Sales Manager at Fong's Europe, also introduced the latest developments of the Goller brand for the washing process, which can reduce water consumption by between 10 to 20%, as well as reductions in both heating energy and waste generation, depending on the specific fabric construction and required shade.

Source:

Monforts  / DyStar Singapore Pte Ltd

23.02.2022

GOTS marks 20th anniversary with all-time high in certified facilities

  • Record high: 12,338 (+19%) GOTS certified facilities in 79 countries in 2021  

Twenty years after its inception, the textile processing standard for organic fibres records new all-time high figures: 18 GOTS Approved Certification Bodies report a total of 12,338 certified facilities (+19%) in 79 countries (+11%).  

Among the countries with the largest increase in GOTS certified facilities in 2021 are Turkey (+61% to 1.799), Italy (+53% to 894), Germany (+19% to 817), Portugal (+35% to 608), France (+22% to 122), Denmark (+14% to 115), Switzerland (+15% to 61), Belgium (+55% to 59), Sweden (+34% to 51) and Vietnam (+264% to 51).

  • Record high: 12,338 (+19%) GOTS certified facilities in 79 countries in 2021  

Twenty years after its inception, the textile processing standard for organic fibres records new all-time high figures: 18 GOTS Approved Certification Bodies report a total of 12,338 certified facilities (+19%) in 79 countries (+11%).  

Among the countries with the largest increase in GOTS certified facilities in 2021 are Turkey (+61% to 1.799), Italy (+53% to 894), Germany (+19% to 817), Portugal (+35% to 608), France (+22% to 122), Denmark (+14% to 115), Switzerland (+15% to 61), Belgium (+55% to 59), Sweden (+34% to 51) and Vietnam (+264% to 51).

“What seemed utopian to many in 2002 has become a reality in the past 20 years. We have created an organic textile standard, certified by approved certification bodies, which is accepted in all major markets. GOTS is a standard that gives consumers the power to choose truly organic products sourced from sustainable supply chains.” says Claudia Kersten, Managing Director at GOTS. “Despite ongoing difficulties and uncertainty caused by the Covid-19 pandemic, decision-makers continue to pursue their sustainability goals and value GOTS as a tool to accomplish them”.

The results of the annual GOTS Survey among certified entities underline this. Out of 1.114 respondents (+39%), 63% indicated a permanent shift in their sustainability strategy with a focus on the environment and health of their workers and staff.

Growing interest from industry, the public, and the media drove website visits up an impressive 48%. Media exposure grew by 64% and GOTS social media followers across several platforms jumped by 57%.
“As much as we are pleased with the development so far, we don’t intend to rest on our laurels” adds Rahul Bhajekar, Managing Director at GOTS. “In March 2022 we begin revision for GOTS version 7.0 involving all stakeholders including associations, organisations, companies, and individuals to further advance the progressive, innovative, stringent yet practical standard of GOTS”.

More information:
GOTS
Source:

GOTS

02.02.2022

Huntsman Textile Effects Launches Water Conservation Project in India

  • 76 KL/Day water saving by optimizing pH analysis process in dye vessels
  • A step closer to achieving the ‘Huntsman Horizon 2025’ goal
  • Potential savings of over Rs 10 crore or USD146,000 annually from the project

Huntsman Textile Effects, the global leader in innovative and environmentally sustainable dyes, chemicals, and digital inks, has successfully implemented a water conservation process to improve water efficiency and reduce net water usage at its Baroda facility, which is located in the western region of India. The initiative undertaken at the plant aims to save around 76 kilo liters of Reverse Osmosis water per day by modifying the phase sequence in the pH measurement program.

Water is used extensively throughout textile processing operations. The amount of water used varies widely in the industry, depending on specific processes operated at the plant, equipment used, and policies concerning water use. This conservation project at the Baroda Plant will have a potential savings of Rs 10 crore or USD146,000 a year for the organization.

  • 76 KL/Day water saving by optimizing pH analysis process in dye vessels
  • A step closer to achieving the ‘Huntsman Horizon 2025’ goal
  • Potential savings of over Rs 10 crore or USD146,000 annually from the project

Huntsman Textile Effects, the global leader in innovative and environmentally sustainable dyes, chemicals, and digital inks, has successfully implemented a water conservation process to improve water efficiency and reduce net water usage at its Baroda facility, which is located in the western region of India. The initiative undertaken at the plant aims to save around 76 kilo liters of Reverse Osmosis water per day by modifying the phase sequence in the pH measurement program.

Water is used extensively throughout textile processing operations. The amount of water used varies widely in the industry, depending on specific processes operated at the plant, equipment used, and policies concerning water use. This conservation project at the Baroda Plant will have a potential savings of Rs 10 crore or USD146,000 a year for the organization.

Speaking on the development, Mark Devaney, Vice President Manufacturing and Operations Excellence, Huntsman Textile Effects said, “At Huntsman, we recognize the important role we play in creating a more sustainable future and are committed to the well-being of the communities where we operate, and the protection of the environment. We are continually looking for ways to improve the environmental footprint of our manufacturing sites and have been implementing numerous projects in recent years to reduce our water usage.”

“The team has done a detailed assessment of the pH analysis process in dye vessels, mapping the existing water usage and potential conservation method. After a brief study and several brainstorming sessions, we were able to adjust the phase sequence, resulting in conservation of Reverse Osmosis water by almost 76 kilo liters of water per day.” said Kavishwar Kalambe, Site Director, Huntsman Textile Effects. “This project directly contributes to Huntsman’s Horizon 2025 goals to reduce net water usage at facilities in water-stressed regions,” he added.

Source:

Huntsman Textile Effects

Rinco Ultrasonics AG opens subsidiary in Mexico (c) Rinco Ultrasonics AG
“The new RINCO ULTRASONICS subsidiary in Querétaro, some 200 km north west of Mexico City, is home to an application-based test laboratory. Moving forward, the subsidiary will bring the company and its products and services much closer to customers and partners alike.” Serge Patamia, CEO
19.05.2021

Rinco Ultrasonics AG opens subsidiary in Mexico

RINCO ULTRASONICS is strengthening its market presence in Central America – a significant market for the automotive supply industry – by opening its own subsidiary in Mexico.

Romanshorn, May 2021 – With the establishment of its eleventh global subsidiary and its first in Central America, RINCO ULTRASONICS is highlighting the importance of the Central American market. “The automotive supply industry is one of the strongest sectors of industry in Mexico and one of the most important markets for RINCO. Our subsidiary in Querétaro, which is located 200 km away from Mexico City, will bring us closer to customers and partners alike,” explains Serge Patamia, CEO of RINCO ULTRASONICS. “We already enjoy high levels of confidence from both customers and partners in the region, and local presence will only serve to improve this. Investing in a dedicated subsidiary underlines our commitment to the market in Central America.”

RINCO ULTRASONICS is strengthening its market presence in Central America – a significant market for the automotive supply industry – by opening its own subsidiary in Mexico.

Romanshorn, May 2021 – With the establishment of its eleventh global subsidiary and its first in Central America, RINCO ULTRASONICS is highlighting the importance of the Central American market. “The automotive supply industry is one of the strongest sectors of industry in Mexico and one of the most important markets for RINCO. Our subsidiary in Querétaro, which is located 200 km away from Mexico City, will bring us closer to customers and partners alike,” explains Serge Patamia, CEO of RINCO ULTRASONICS. “We already enjoy high levels of confidence from both customers and partners in the region, and local presence will only serve to improve this. Investing in a dedicated subsidiary underlines our commitment to the market in Central America.”

José Armando Vázquez, the newly appointed country manager for Mexico, brings both passion and specialist expertise to his role. Having grown up in the automotive industry, Vazquez knows the needs and requirements of the supplying industry and the plastics sector inside out.

In José Armando Vázquez, customers and interested parties in Mexico have a local point of contact who is bringing Swiss perfection to Querétaro in the form of RINCO ULTRASONICS MEXICO. In addition to sales, RINCO in Mexico also offers technical services such as an application-based test laboratory and various service facilities to promote the building of partnerships and the delivery of new projects.
“Our aim is to captivate users with our ultrasonic technology and offer them tangible added value so that by using solutions like our AGM Pro ultrasonic generator, for example, they can save time and user fewer materials,”, says Serge Patamia, summarising what customers in Central America can expect.

RUDOLF HUB1922 : Innovation rooted into Aspirational Chemistry (c) RUDOLF Group
26.10.2020

RUDOLF HUB1922 : Innovation rooted into Aspirational Chemistry

The textile industry, one of the major industrial sectors worldwide, is going through a significant revolution, with changes taking place in various sections of textile processing. Biotechnology and biomimicry, for example, are continuously playing an important role in redefining the influence of the textile industry on society, and so is progress made in auxiliary chemistry, with advances investigated and then applied in almost every section of textile processing.  The outcome is amazingly promising.

Modern, real science is inextricably intertwined with environmental consciousness and they are definitely not mutually exclusive.

The textile industry, one of the major industrial sectors worldwide, is going through a significant revolution, with changes taking place in various sections of textile processing. Biotechnology and biomimicry, for example, are continuously playing an important role in redefining the influence of the textile industry on society, and so is progress made in auxiliary chemistry, with advances investigated and then applied in almost every section of textile processing.  The outcome is amazingly promising.

Modern, real science is inextricably intertwined with environmental consciousness and they are definitely not mutually exclusive.

At RUDOLF GROUP modern, real science means pushing R&D so to constantly explore new technology and innovations that help transform the textile and fashion industries. We work to reduce the overall dependency on traditional and virgin resources.  Getting textile manufacturers as well as brand and retailers on board is key to achieve real change. By 2030 we aim for a significant fraction of our products to be either sourced through paths alternative to the traditional petrochemicals, or by upcycling waste and/or byproducts from other industries.

“This is the kind of genuine, tangible, environmental consciousness that truly defines us and that entails that RUDOLF GROUP has a responsibility for the needs of society as a whole.” Said Alberto De Conti, Head of Rudolf Fashion Division “We have a maniacal attention to the environmental impact of our operations and products. We have truly embedded in ourselves the notion that “sustainability” is a key issue and critical to the long-term survival of our company and of society at large. “

The combination of modern, real science and environmental consciousness leads to what RUDOLF GROUP call aspirational chemistry something unique and something that positions us as shining example and guiding light throughout the industry. That is, in fact, BETTER CHEMISTRY.

Two are the innovations rooted in aspirational chemistry that RUDOLF HUB1922 presents. The first one is our WASHLESS technology and the second one is a brand new launch: LASER SMOOTHER, which supports laser technology and helps creating much better denim looks.

WASHLESS

HUB1922 WASHLESS, which can be applied to both denim and non-denim, is the simultaneous application of
-    proprietary fluorine-free DWR (Durable Water Resistance) based on biomimicry to repel dirt
-    anti-microbial, anti-bacteria and anti-viral, non-migrating chemistry to stop body odour.
The combination of the 2 translates into garments that don’t require to be washed as much.

Life cycle assessment studies on clothes, detergents and washing machines show that home laundering is always the most energy‐demanding period during these products' life cycle, even higher than production or transportation phases.

“WASHLESS aims at changing consumer habits in clothing maintenance to a more environmentally friendly direction and represents a change that is the most feasible and efficient. Making washing machines obsolete is impossible, but even though the technologies in clothes cleaning have improved greatly, the washing frequency has not been reduced. We own more and more clothing and wash it more frequently. This increased amount of washing counteracts the technological improvements in home laundry. “ said De Conti.

It is only by understanding the climate change impact associated with home laundering that product innovations and consumer education can be explored. Studies consistently show that a carbon dioxide reduction of 105 MT and electricity savings of 142 thousand GWh can be obtained by reducing home laundering, on average, by 1/3. This is roughly equivalent to removing 12% of the 140 M passenger cars in the US, or taking 23 coal power plants off the grid. In addition, more than 60% of water consumed while laundering (2,000 billion liters) can be reduced through these strategies.

LASER SMOOTHER

Laser denim is the current dominant technology available to the denim industry to create locally abraded areas, vintage effects, whiskers, patterns, patches, and even intentional holes and tears in a garment. Laser technology uses less water, harmful chemicals (such as potassium permanganate) and energy to create a wide variety of denim looks.

However, laser is not always able to produce the desired look, on the desired fabric, in the desired time. Therefore, chemical companies have been developing laser boosters that can be pre-applied to the garments in order to intensify the effect of the laser to mimic heavier bleaching applications. Unfortunately, laser boosters can create blurred images where the definition is lower and the overall image less natural.

The brand new RUDOLF HUB1922 LASER SMOOTHER is an all-in-one formulation, very easy to pre-apply to garments before laser burning and that return a very natural image which is very similar to the highly desirable hand scraping. Laser smoother can be applied by traditional exhaust or through nebulization and it dries at normal temperature in normal tumble driers.  Advantages of LASER PRIMER are:

•    Remarkable enhancement of the fabric’s characteristics (heightening of material)
•    Overall effect much more natural and similar to manual scraping (craftsmanship dimension)
•    Reduced required laser power to achieve the wanted effect (conspicuous energy saving)
•    A faster laser burning process (significant time saving, depending on the final effect)
•    Any other chemical spray is not required (environmental friendliness)
•    Reduced cost compared to other solution (financial viability)

More information:
Rudolf Group HUB1922 Denim
Source:

EFFE-BI SRL PR & COMMUNICATION 

(c) Archroma
15.11.2019

ARCHROMA at ChromaTexChem India 2019

Archroma will be at ChromaTexChem India 2019 to present its latest innovations and solution systems aimed to help textile manufacturers with optimized productivity and/or value creation in their markets. Archroma will also moderate a panel at the exhibition official conference on “Sustainable innovation in textile processing”.

At ChromaTexChem, visitors will be able to discover 24 systems developed along the principles of The Archroma Way to help them create value in their textile applications and markets.

Anjani Prasad, Head of Sales, India, Archroma, comments: “With the growing concerns about resource scarcity and product safety, brands and manufacturers in India work with us, because we continuously develop the innovations and solution systems that help them to address these challenges, increase productivity and create value for them. We do that with in mind the planet and its inhabitants, in line with the objectives of “The Archroma way": Safe, efficient, enhanced. Because it’s our nature!”

Archroma will be at ChromaTexChem India 2019 to present its latest innovations and solution systems aimed to help textile manufacturers with optimized productivity and/or value creation in their markets. Archroma will also moderate a panel at the exhibition official conference on “Sustainable innovation in textile processing”.

At ChromaTexChem, visitors will be able to discover 24 systems developed along the principles of The Archroma Way to help them create value in their textile applications and markets.

Anjani Prasad, Head of Sales, India, Archroma, comments: “With the growing concerns about resource scarcity and product safety, brands and manufacturers in India work with us, because we continuously develop the innovations and solution systems that help them to address these challenges, increase productivity and create value for them. We do that with in mind the planet and its inhabitants, in line with the objectives of “The Archroma way": Safe, efficient, enhanced. Because it’s our nature!”

More information:
Archroma ChromaTexChem 2019
Source:

EMG

(c) imogo
02.05.2019

A proposition for pioneers at ITMA

imogo is a new Swedish company formed by a team with long experience in textile processing technology. It is now boldly aiming to change the face of the textile manufacturing industry with its new Dye-Max spray dyeing technology, to be introduced to the market at ITMA 2019 in Barcelona.

While still at the prototype stage, and with a first full-scale line currently under construction and due to be demonstrated this Autumn before delivery, the DyeMax nevertheless promises to slash the use of fresh water, waste water, energy and chemicals by as much as 90% compared to conventional jet dyeing systems.

Spray cassettes
Its application unit consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo pro speed valve that controls the volume to be applied. The chamber is equipped with an exhaust system and droplet separator to ensure that the environment around the unit is free from particles.

imogo is a new Swedish company formed by a team with long experience in textile processing technology. It is now boldly aiming to change the face of the textile manufacturing industry with its new Dye-Max spray dyeing technology, to be introduced to the market at ITMA 2019 in Barcelona.

While still at the prototype stage, and with a first full-scale line currently under construction and due to be demonstrated this Autumn before delivery, the DyeMax nevertheless promises to slash the use of fresh water, waste water, energy and chemicals by as much as 90% compared to conventional jet dyeing systems.

Spray cassettes
Its application unit consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo pro speed valve that controls the volume to be applied. The chamber is equipped with an exhaust system and droplet separator to ensure that the environment around the unit is free from particles.

“The spray cassettes are a key part in the Dye-Max line,” explains Imogo’s founding partner Per Stenflo. “There is one set of spray cassettes for each of the three separate dye dispersion feed lines and they can be easily exchanged without the need for tools in less than a minute. This allows for extremely fast changeovers between different colours without the need for cleaning. And because the spray cassettes are removable, all maintenance can be performed off line. 
After applying the dye dispersion the fabric is rolled onto a shaft and moved to the autoclave for deep dye fixation via heat and pressure.”

The savings in treatment water the Dye-Max achieves are due to the extremely low liquor ratio of 0.5 litres per kilo of fabric Stenflo adds. 

“At the same time, the low liquor ratio and the spray process require considerably less auxiliary chemistry to start with, and all of it is used in the process, which also greatly reduces the production of waste water, with only 20 litres being required for wash at changeovers. The low liquid content in the fabric meanwhile minimises the energy needed for fixation.”

The Dye-Max has a working speed of up to 50m/min with the practical speed determined by the fabric weight and application volume. 
 

More information:
imogo
Source:

imogo

(c) Messe Frankfurt India
25.02.2019

Messe Frankfurt India and MEX Exhibitions enter into a strategic alliance

With portfolio expansion and future development of the industry in sight, the organisers of Texprocess India and Gartex India have entered into a strategic alliance to form a unified industry platform ‘Gartex Texprocess India’. The event will be part of Messe Frankfurt’s Texpertise Network leveraging on the group’s strong global network and expertise in the sector.
 
Leading in both apparel consumption and exports, India holds the second largest textile manufacturing capacity globally with the textile machinery sector witnessing a growth of 8-10 percent year on year. As the world's second largest exporter of textiles and clothing projected to reach USD 300 billion by 2024, Indian apparel manufacturers are moving towards increasing their manufacturing capacities and upgrading technology, giving rise to automation garmenting processes to enter the Indian market. Having made its debut in 2016, both Texprocess India and Gartex India received tremendous response from the industry with leading associations and companies in the garment and textile machinery sector coming forward to support the shows.
 

With portfolio expansion and future development of the industry in sight, the organisers of Texprocess India and Gartex India have entered into a strategic alliance to form a unified industry platform ‘Gartex Texprocess India’. The event will be part of Messe Frankfurt’s Texpertise Network leveraging on the group’s strong global network and expertise in the sector.
 
Leading in both apparel consumption and exports, India holds the second largest textile manufacturing capacity globally with the textile machinery sector witnessing a growth of 8-10 percent year on year. As the world's second largest exporter of textiles and clothing projected to reach USD 300 billion by 2024, Indian apparel manufacturers are moving towards increasing their manufacturing capacities and upgrading technology, giving rise to automation garmenting processes to enter the Indian market. Having made its debut in 2016, both Texprocess India and Gartex India received tremendous response from the industry with leading associations and companies in the garment and textile machinery sector coming forward to support the shows.
 
At the internationally renowned Texprocess, exhibitors from around the world converge to present the latest machines, plants, processes and services for the manufacture of garments and textile and flexible materials. While Texprocess India was launched as a pavilion to create an innovation platform for garment-manufacturing and textile processing at Techtextil India tradeshow in Mumbai, Gartex India exhibition was held annually in New Delhi and has grown wider in scope covering not just garment and textile manufacturing value chain but has also added segments like innerwear manufacturing zone, Laundry & Denim show along the way in addition to digital textile printing, embroidery and other existing verticals. With the merger of the two strong textile trade fair brands, the organisers, Messe Frankfurt Trade Fairs India Pvt Ltd and MEX Exhibitions, aspire to work in collaboration for India’s textile industry development, facilitating global sourcing and networking in the textile value chains.

More information:
Messe Frankfurt
Source:

Messe Frankfurt

27.04.2018

HYGIENICALLY CLEAN HEALTHCARE ADVISORY BOARD ANNOUNCES FULL SLATE OF MEMBERS

TRSA, the global association for the linen, uniform and facility services industry, and the creator and administrator of the Hygienically Clean Certification announced today its 2018 Hygienically Clean Healthcare Advisory Board slate of members.

“The board is responsible for administering, enforcing, and revising TRSA’s Hygienically Clean Healthcare (HCH) Standards. Additional duties include establishing and maintaining criteria and procedures for the certification of healthcare textile processing in commercial, cooperatives, and in-house healthcare laundries and facilities. These subject matter experts will provide guidance regarding best management practices (BMPs), inspections and testing to ensure that the Hygienically Clean Healthcare Certification Program benefits consumers, laundry-processing facilities and textile services customers,” said Joseph Ricci, President and CEO of TRSA.

TRSA, the global association for the linen, uniform and facility services industry, and the creator and administrator of the Hygienically Clean Certification announced today its 2018 Hygienically Clean Healthcare Advisory Board slate of members.

“The board is responsible for administering, enforcing, and revising TRSA’s Hygienically Clean Healthcare (HCH) Standards. Additional duties include establishing and maintaining criteria and procedures for the certification of healthcare textile processing in commercial, cooperatives, and in-house healthcare laundries and facilities. These subject matter experts will provide guidance regarding best management practices (BMPs), inspections and testing to ensure that the Hygienically Clean Healthcare Certification Program benefits consumers, laundry-processing facilities and textile services customers,” said Joseph Ricci, President and CEO of TRSA.

Members of the newly formed board of directors, who represent the entire industry -- linen, uniform and facility service companies, large central laundries, healthcare linen, uniform and facility services customers of TRSA members, suppliers, and experts from related healthcare and other professional organizations -- will serve a three-year term:

Randy Bartsch
CEO, Ecotex Healthcare Linen Service Inc.
Chairman

Rick Kislia
Chief Operating Officer
Crescent Laundry
Vice Chairman

David J. Stern
President & CEO, Paris Companies
Secretary

Greg Anderson
CEO, Campus Laundry

Angela Becker
Senior Program Leader, Textile Care RD&E, Ecolab

Murray L. Cohen, PhD, MPH, CIH
Owner, Consultants in Disease and Injury Control (CDIC)

Dr. Alexis M. Elward, MD
Pediatric Infectious Disease
Washington University School of Medicine in St. Louis

Eoin Flavin
Director, European Operations, WSI

David F. Goldsmith, MSPH, PhD, LLC
George Washington & Georgetown Universities

James Hall
CEO, Northwest Health Care Linen

Tony Long
VP, Risk Management, Angelica
Lynn A. Moreau, RN, BSN
Clinical Liaison Manager
HandCraft Linen Services

Michael Potack
Chairman, Unitex

Robert Raphael
Co-President
Service Linen Supply Inc.

Liz Remillong
Vice President, Strategic Alliance
Crothall Healthcare

Douglas Waldman
President, Superior Linen Service

Charles Rossmiller
Director Laundry Programs
Textile Sales
Medline Industries, Inc.

Thomas Smith
Director, Safety & Training
Foussard Montague Associates, Inc.

 

34th International Cotton Conference Bremen (c) BREMER BAUMWOLLBÖRSE
Opening of the Cotton Conference 2018
26.03.2018

34th International Cotton Conference Bremen

  • Deep Insights into the Multifaceted World of Cotton
  • Quality, Innovation and Digitalisation are Crucial

From the 21st to the 23rd of March, the international cotton industry came together in the historic Bremen Town Hall, under the motto "Cotton Insights". More than 500 participants from almost 40 countries came to exchange views on the latest trends in the natural raw material as part of the conference organised by the Bremen Cotton Exchange in cooperation with the Fibre Institute Bremen. The 34th International Cotton Conference provided a varied, in-depth programme which addressed the current and burning issues within the industry.

Summarising his visit to the conference, Kai Hughes, Executive Director of the International Cotton Advisory Committee (ICAC) in Washington said “The Bremen Cotton Conference is unique because it brings the diverse world of cotton together in one place. It is always a great opportunity to learn about the latest innovations, talk to cotton merchants and get an overview of the industry".

  • Deep Insights into the Multifaceted World of Cotton
  • Quality, Innovation and Digitalisation are Crucial

From the 21st to the 23rd of March, the international cotton industry came together in the historic Bremen Town Hall, under the motto "Cotton Insights". More than 500 participants from almost 40 countries came to exchange views on the latest trends in the natural raw material as part of the conference organised by the Bremen Cotton Exchange in cooperation with the Fibre Institute Bremen. The 34th International Cotton Conference provided a varied, in-depth programme which addressed the current and burning issues within the industry.

Summarising his visit to the conference, Kai Hughes, Executive Director of the International Cotton Advisory Committee (ICAC) in Washington said “The Bremen Cotton Conference is unique because it brings the diverse world of cotton together in one place. It is always a great opportunity to learn about the latest innovations, talk to cotton merchants and get an overview of the industry".

Sustainability and Cotton
This year, the conference developed into a whole week of diverse events around the entire cotton supply chain. With the “SUSTAIN” event, which was organised in cooperation with the Weser-Kurier newspaper, it was possible to build a bridge between the issue of sustainability and the end consumer.
With the focus on Africa, the emerging continent, which also has a special significance for cotton, became the centre of attention.

In his opening speech, Henning Hammer, President of the Bremen Cotton Exchange, made it clear that sustainability is also of great importance during the Cotton Conference: "The three pillars of sustainability – the environment, the economy and social issues – were already playing a role in the cotton industry when the word sustainability was far from being on everyone's lips.
Many changes that are being demanded in the sense of responsible agriculture and responsible trade take their time, many are already in the starting blocks and a lot already exists. We have a very alert, active agricultural research worldwide."

The Keynotes
The keynote session, moderated by the journalist Lisa Boekhoff from the newspaper Weser-Kurier, gave participants an overview, with an informative analysis of the current cotton situation. Kai Hughes, executive director of ICAC, emphasised in his keynote address the need to provide credible facts and figures which should be the basis for the entire supply chain. The marketing of cotton and changing consumer habits in a globalised and digitalised world were the subject of lectures by Mark Messura, Cotton Incorporated and Robert Antoshak, Olah Inc. Eugen Weinberg and Michael Alt from Commerzbank took a look at the raw material from a stock market perspective.

Traceability and Digitalisation
Digitalisation is also a cross-cutting issue that runs through the entire supply chain of the cotton industry. In his opening speech, Prof. Axel S. Hermann, Head of the Fibre Institute Bremen, emphasised the importance of digitalisation for the industry. “It enables new approaches in cotton cultivation and textile processing, but also influences consumer behaviour and thus the necessary changes in the textile industry.” The focus is on the status quo of the implementation, as well as the opportunities and risks of digitally controlled, vertically integrated procurement and sales processes and the associated challenges at retail level.

Another current topic is traceability, which is also closely linked to sustainability. More and more buyers want to know whether their suppliers are meeting the promised sustainability criteria for their products, also textile products. Consequently, the conference presented various techniques for testing the authenticity of a cotton provided in the finished textile, such as DNA testing, fingerprint analysis technique, marker methods and block-chain processes.

Cotton Quality
In addition to current subjects such as digitalisation and traceability, questions of cotton quality have traditionally been an essential element of the Cotton Conference, which was further reinforced this year with the "Spinners Seminar". The spinning mill seminar, which was carried out by the Cotton Exchange and the Fibre Institute in cooperation with the ITMF and IVGT associations, far exceeded expectations.

More than 70 participants discussed the handling of impurities in supplied cotton in the manufacturing process.
In addition, in a high-level expert session, there was an exchange of the latest research results which determine the future of cotton production and the processing of cotton into innovative products.

Source:

BREMER BAUMWOLLBÖRSE

Warping Mill (c) Velener Textil
02.03.2018

International Cotton Conference Bremen 2018

  • Innovative Textile Processes

Innovations are welcome. Based on innovations, many changes in textile processing are leading to more efficiency in process workflows. At the International Cotton Conference in Bremen on Wednesday, March 21st, Session IV Textile Processing, which takes place from 4:00 pm to 6:00 pm, is dedicated to this subject area and attractive examples.

Sustainable
Michael Tuschak, Mayer & Cie., Germany, informs about the 3-in-1 concept of Spinitsystems. Spinning, cleaning and knitting are all combined in one machine. This enables the production process of high-quality single jersey knitwear to be shortened significantly, which saves energy costs and reduces CO2 emissions.

Indigo.
An old dye returns to glory. Dr. Dean Etheridge of Texas Tech University, USA, talks about a new, innovative indigo dyeing process for cotton yarns using foam. This saves large amounts of water and is now increasingly being used by major brands in jeans production.

  • Innovative Textile Processes

Innovations are welcome. Based on innovations, many changes in textile processing are leading to more efficiency in process workflows. At the International Cotton Conference in Bremen on Wednesday, March 21st, Session IV Textile Processing, which takes place from 4:00 pm to 6:00 pm, is dedicated to this subject area and attractive examples.

Sustainable
Michael Tuschak, Mayer & Cie., Germany, informs about the 3-in-1 concept of Spinitsystems. Spinning, cleaning and knitting are all combined in one machine. This enables the production process of high-quality single jersey knitwear to be shortened significantly, which saves energy costs and reduces CO2 emissions.

Indigo.
An old dye returns to glory. Dr. Dean Etheridge of Texas Tech University, USA, talks about a new, innovative indigo dyeing process for cotton yarns using foam. This saves large amounts of water and is now increasingly being used by major brands in jeans production.

Efficient.
Amin Leder, Trützschler GmbH & Co. KG, Germany, presents a technique in which the stretching process for rotor yarn production does not take place in a separate machine, but is integrated into the carding. This makes it possible to efficiently process even cotton with a higher waste content.

Overview.
Harald Schwippel, from Rieter, Switzerland, summarises all four major spinning technologies for cotton – ring spinning, compact spinning, rotor spinning and air-jet spinning. His talk provides an overview of the possibilities that each of these processes currently offers for the manufacture of different yarns and the most efficient options for different applications.

More to know
In the run-up to the International Cotton Conference, the Fibre Institute Bremen and the Cotton Exchange are organising a specific seminar for spinning mills on Tuesday, dealing with the efficient handling of contaminants in cotton, from elimination in production to removal in winding. On Friday morning, Expert Session IX deals with the exchange of the latest research results, e.g. in the field of ginning in relation to cotton quality, or the important issue of checking the traceability of GMO-free cotton.

Source:

Elke Hortmeyer, Rainer Schlatmann, Baumwollbörse

(c) Koch Membrane Systems
28.02.2018

KPR Mill Switched to KMS PURON® MBR Technology

Wilmington, MA – March 1, 2018 - Koch Membrane Systems, Inc. (KMS), a global leader in membrane filtration technologies, announced today that it has provided PURON® Membrane Bio-Reactor (MBR) modules as part of a system upgrade to the wastewater treatment facility of KPR Mill Limited. KPR Mill is one of the largest apparel manufacturing companies in India. KPR Mill decided to upgrade their wastewater treatment facility from an old conventional plant to an advanced MBR technology due to its environmental commitment to ensure zero liquid discharge (ZLD) by recycling 100% of their wastewater. Among the key reasons for selecting the PURON® MBR modules are its unique design, including single header and central aeration, reliable and consistent operation, and strong after-market support from KMS.
 

Wilmington, MA – March 1, 2018 - Koch Membrane Systems, Inc. (KMS), a global leader in membrane filtration technologies, announced today that it has provided PURON® Membrane Bio-Reactor (MBR) modules as part of a system upgrade to the wastewater treatment facility of KPR Mill Limited. KPR Mill is one of the largest apparel manufacturing companies in India. KPR Mill decided to upgrade their wastewater treatment facility from an old conventional plant to an advanced MBR technology due to its environmental commitment to ensure zero liquid discharge (ZLD) by recycling 100% of their wastewater. Among the key reasons for selecting the PURON® MBR modules are its unique design, including single header and central aeration, reliable and consistent operation, and strong after-market support from KMS.
 
KPR Mill has been using a conventional Effluent Treatment Plant (ETP).  Their old technology involved high chemicals consumption which required high maintenance levels, resulting in frequent production shut downs due to ETP failures.  The new MBR plant is designed to handle 3000 m³/day of textile effluent, utilizing two MBR trains. Initial results show that KPR Mill has reduced chemical costs and eliminated downtime, maximizing textile production. In addition to savings in operational cost and production optimization, KPR strives for an eco-friendly textile processing system. KPR’s selection of PURON® membranes help them achieve their goals of environmental sustainability.
 
“The membrane bioreactor technology from KMS operates very reliably and has resulted in a significant reduction of chemical, operating and maintenance costs of about 10%,” said Mr. C.R. Ananda Krishnan, executive director of KPR Mill Limited. “And as we are a trend setter in using eco-friendly advanced technologies, we were happy to have PURON® MBR as a technology partner who fits our needs and our vision.”
 
“KMS has developed advanced membrane solutions for the textile industry,” said Mr. Manny Singh, President of KMS. “Our products and services help the industry treat wastewater to meet strict discharge and reuse targets, and create value through various chemical recovery processes.”

Source:

Rob Carlton, Koch Membrane Systems