From the Sector

Reset
7 results
B.I.G. YARNS awarded HPR status for second European plant © Beaulieu International Group
B.I.G. YARNS awarded HPR status for second European plant.
07.09.2021

B.I.G. YARNS awarded HPR status for second European plant

  • FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
  • Completes HPR Award status for B.I.G. YARNS’ European production facilities
  • Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

  • FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
  • Completes HPR Award status for B.I.G. YARNS’ European production facilities
  • Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

Emmanuel Colchen, General Manager B.I.G. YARNS, comments: “Achieving the prestigious HPR Award recognizes the commitment of the teams at B.I.G. YARNS and the wider Beaulieu International Group to proactive risk management and contingency planning to ensure the safety and protection of our workplaces. Safeguarding property is a key element in enabling us to provide business continuity for our customers in demanding sectors like automotive, commercial contract and residential flooring.”

B.I.G. YARNS’ Komen production facility is the fifth plant at B.I.G. to receive HPR status - the highest level a plant can achieve for fire risk prevention and protection.

The Yarns division of Beaulieu International Group achieved HPR status for its other European site in Comines, France, in 2017.

Logo Rieter (c) Rieter
05.11.2020

Strategic Partnership Between Rieter and WW Systems

  • License agreement concluded for promising technology
  • Integration into the digital spinning suite ESSENTIAL
  • Implementation of digital strategy further advanced

The Rieter Group concludes a license agreement with WW Systems on November 5, 2020 and will integrate the Brazilian company's promising product into its digital spinning suite ESSENTIAL. "OptCotton" from WW Systems offers the only software system worldwide that enables an even blend of cotton for the spinning process. With this cooperation, Rieter is taking an important step forward in implementing its digital strategy and offering its customers further added value in yarn production.

  • License agreement concluded for promising technology
  • Integration into the digital spinning suite ESSENTIAL
  • Implementation of digital strategy further advanced

The Rieter Group concludes a license agreement with WW Systems on November 5, 2020 and will integrate the Brazilian company's promising product into its digital spinning suite ESSENTIAL. "OptCotton" from WW Systems offers the only software system worldwide that enables an even blend of cotton for the spinning process. With this cooperation, Rieter is taking an important step forward in implementing its digital strategy and offering its customers further added value in yarn production.

"OptCotton" eliminates variations in quality between cotton blends that are being prepared for the spinning process. In this way, standardized quality yarn can be produced efficiently in the spinning process. From the arrival of the bales in the warehouse to their use in the blowroom line, “OptCotton” manages the entire blending process with no need for categorization. This results in increased efficiency in storage and logistics as well as machine performance.

Integration into the digital spinning suite ESSENTIAL
By integrating this solution, Rieter strengthens its digital spinning suite ESSENTIAL. Access to bale-related fiber data and raw material information opens up new possibilities for controlling the spinning mill. In combination with the existing modules ESSENTIALbasic, ESSENTIALmonitor, ESSENTIALmaintain and ESSENTIALpredict, this optimizes the entire spinning process and raises digital intelligence to a new level.

Source:

Rieter Management AG

Oerlikon (c) Oerlikon
29.10.2020

Oerlikon: Less waste with the Smart Factory

A typical manmade fiber system produces well over 600 tons of yarn a day. This equals in around 700 winders in filament yarn production or 3 systems in staple fiber production. These figures show just how important smooth production processes are.

If an error creeps into the process at any point, the daily waste increases dramatically. It is obvious that all yarn manufacturers want to prevent this happening to ensure their production facilities operate efficiently. Here, digitalization provides invaluable support. A Smart Factory that networks all steps within the production chain – including all auxiliary processes – identifies and reports quality deviations at an early stage. Yarn manufacturers can quickly intervene in the production process and hence avoid generating waste.

A typical manmade fiber system produces well over 600 tons of yarn a day. This equals in around 700 winders in filament yarn production or 3 systems in staple fiber production. These figures show just how important smooth production processes are.

If an error creeps into the process at any point, the daily waste increases dramatically. It is obvious that all yarn manufacturers want to prevent this happening to ensure their production facilities operate efficiently. Here, digitalization provides invaluable support. A Smart Factory that networks all steps within the production chain – including all auxiliary processes – identifies and reports quality deviations at an early stage. Yarn manufacturers can quickly intervene in the production process and hence avoid generating waste.

Digital solutions ensures process reliability
And the Smart Factory is also the focus of Oerlikon Manmade Fibers. Here, it comprises considerably more than the Plant Operation Center, a system that has been well-established within the market for many years now. “This is about absolute transparency and traceability. At the end of the process, yarn manufacturers are able to track at which position its finished textured yarn packages were spun and even have information on the processed granulate and the specific production conditions”, comments Ivan Gallo, responsible for digital products at Oerlikon Manmade Fiber. In this way, the Smart Factory ensures process reliability, above all. The data are automatically entered into the system and the product assessed at each stage of yarn production at which values and data are recorded – such as during visual inspection and when weighing. In the event of anomalies in the intermediate laboratory and quality checks, this allows yarn producers to intervene in the production process and correct these anomalies.

Information on the chip feeding, on the drying and on the masterbatch are available, as are data on the climate control, on the compressed air supply and on further auxiliary systems. With this, yarn manufacturers have at all times a complete overview of the ongoing production process, including comprehensive information on quality and production costs.

Source:

Oerlikon

Oerlikon Barmag: Largest single industrial yarn order (c) Oerlikon Barmag
And the new Oerlikon Barmag systems at Fujian Billion will also be used to manufacture yarns for the automotive sector.
23.07.2020

Oerlikon Barmag: Largest single industrial yarn order

  • Textile yarn manufacturer Fujian Billion kicks off industrial yarn production

Remscheid – from the end of this year, the southern Chinese yarn manufacturer Fujian Billion Polymerization Technology Industrial Co., Ltd. will be producing industrial yarns using systems supplied by Oerlikon Barmag. With this, the company – considered to be the largest polyester yarn manufacturer in southern China – is now also entering the industrial yarn market.

With 124 positions and a capacity of around 250,000 tons per annum, this project is the largest single industrial yarn order placed with Oerlikon Barmag to date. And with this order, the southern Chinese yarn manufacturer instantly positions itself as one of the ten largest Chinese industrial yarn producers. “The systems at Fujian Billion come with our latest draw unit design, which has been optimized for use with Oerlikon Barmag automation solutions”, comments Roy Dolmans, Head of Development for the Industrial Yarn Process. As a result, the newcomer in the industrial yarn sector is now superbly equipped for the future.

  • Textile yarn manufacturer Fujian Billion kicks off industrial yarn production

Remscheid – from the end of this year, the southern Chinese yarn manufacturer Fujian Billion Polymerization Technology Industrial Co., Ltd. will be producing industrial yarns using systems supplied by Oerlikon Barmag. With this, the company – considered to be the largest polyester yarn manufacturer in southern China – is now also entering the industrial yarn market.

With 124 positions and a capacity of around 250,000 tons per annum, this project is the largest single industrial yarn order placed with Oerlikon Barmag to date. And with this order, the southern Chinese yarn manufacturer instantly positions itself as one of the ten largest Chinese industrial yarn producers. “The systems at Fujian Billion come with our latest draw unit design, which has been optimized for use with Oerlikon Barmag automation solutions”, comments Roy Dolmans, Head of Development for the Industrial Yarn Process. As a result, the newcomer in the industrial yarn sector is now superbly equipped for the future.

The well-known company – located in the Chinese Fujian Province – will be predominantly manufacturing high-tenacity (HT) and low-shrinkage (LS) yarns from the end of this year. These sophisticated yarns are deployed both in the automotive, geotextiles and safety sectors (HT yarns) and in the manufacture of coated industrial textiles such as truck tarpaulins and tents (LS yarns).

Founded in Jinjiang, Quanzhou, in 2003, Fujian Billion Polymerization Technology Industrial Co., Ltd. is one of the top 500 privately-owned enterprises in China. Annually, the yarn manufacturer produces around 2.8 million tons of filament yarn and ethylene-propylene side-by-side (ES) fibers.

Even more efficient and economical – the modified RoTac³ is part of the BCF S8’s standard scope of delivery   (c) Oerlikon Neumag
Even more efficient and economical – the modified RoTac³ is part of the BCF S8’s standard scope of delivery
20.03.2020

Oerlikon Neumag: RoTac³ tangling unit with comprehensive modifications

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Stable and efficient yarn production is hugely important to yarn manufacturers. Not only does the evenness of the tangling knots make the investment interesting, so too does the energy efficiency of the RoTac3. The tangling unit requires up to 50 percent less energy for generating compressed air. Against the background of rising energy prices, this represents an excellent prerequisite for optimizing production costs.

Oerlikon Neumag has been able to secure various retrofit contracts since the launch of the RoTac3 in 2015. And new systems are predominantly equipped with RoTac³. The RoTac³ is included in the standard scope of delivery for the newer BCF S8 system. The tangling unit is available as an option both for the single-end Sytec One system and the three - end S+ and it can also be retrofitted on request.

Source:

Oerlikon Neumag 

 The BCF S8 sets new standards with regards to color separation. (c) Oerlikon Manmade Fibers
The BCF S8 sets new standards with regards to color separation.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Focuses on Carpet yarns

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

 

Source:

Oerlikon Manmade Fibers

Warping Mill (c) Velener Textil
02.03.2018

International Cotton Conference Bremen 2018

  • Innovative Textile Processes

Innovations are welcome. Based on innovations, many changes in textile processing are leading to more efficiency in process workflows. At the International Cotton Conference in Bremen on Wednesday, March 21st, Session IV Textile Processing, which takes place from 4:00 pm to 6:00 pm, is dedicated to this subject area and attractive examples.

Sustainable
Michael Tuschak, Mayer & Cie., Germany, informs about the 3-in-1 concept of Spinitsystems. Spinning, cleaning and knitting are all combined in one machine. This enables the production process of high-quality single jersey knitwear to be shortened significantly, which saves energy costs and reduces CO2 emissions.

Indigo.
An old dye returns to glory. Dr. Dean Etheridge of Texas Tech University, USA, talks about a new, innovative indigo dyeing process for cotton yarns using foam. This saves large amounts of water and is now increasingly being used by major brands in jeans production.

  • Innovative Textile Processes

Innovations are welcome. Based on innovations, many changes in textile processing are leading to more efficiency in process workflows. At the International Cotton Conference in Bremen on Wednesday, March 21st, Session IV Textile Processing, which takes place from 4:00 pm to 6:00 pm, is dedicated to this subject area and attractive examples.

Sustainable
Michael Tuschak, Mayer & Cie., Germany, informs about the 3-in-1 concept of Spinitsystems. Spinning, cleaning and knitting are all combined in one machine. This enables the production process of high-quality single jersey knitwear to be shortened significantly, which saves energy costs and reduces CO2 emissions.

Indigo.
An old dye returns to glory. Dr. Dean Etheridge of Texas Tech University, USA, talks about a new, innovative indigo dyeing process for cotton yarns using foam. This saves large amounts of water and is now increasingly being used by major brands in jeans production.

Efficient.
Amin Leder, Trützschler GmbH & Co. KG, Germany, presents a technique in which the stretching process for rotor yarn production does not take place in a separate machine, but is integrated into the carding. This makes it possible to efficiently process even cotton with a higher waste content.

Overview.
Harald Schwippel, from Rieter, Switzerland, summarises all four major spinning technologies for cotton – ring spinning, compact spinning, rotor spinning and air-jet spinning. His talk provides an overview of the possibilities that each of these processes currently offers for the manufacture of different yarns and the most efficient options for different applications.

More to know
In the run-up to the International Cotton Conference, the Fibre Institute Bremen and the Cotton Exchange are organising a specific seminar for spinning mills on Tuesday, dealing with the efficient handling of contaminants in cotton, from elimination in production to removal in winding. On Friday morning, Expert Session IX deals with the exchange of the latest research results, e.g. in the field of ginning in relation to cotton quality, or the important issue of checking the traceability of GMO-free cotton.

Source:

Elke Hortmeyer, Rainer Schlatmann, Baumwollbörse