From the Sector

Smart textiles have the potential to revolutionise healthcare. In his doctoral thesis in textile technology at the University of Borås, Emanuel Gunnarsson presents unique solutions to the bottleneck that has long inhibited the market.

With an ageing population, increasing demands are being placed on healthcare and smart textiles can offer a solution where only imagination sets limits. “The long-term goal of most smart textiles is for them to be so easy to use that the user doesn't think of them as anything more than regular garments. No special procedure should be needed to use them. If we succeed in that, we won't burden healthcare by having healthcare personnel administer vital parameter monitoring such as blood pressure and pulse, as the user can handle it themselves,” said Emanuel Gunnarsson.

In his work, he has investigated how a t-shirt for measuring heart rhythm and movement patterns, and garments for electrostimulation, can be produced in a single step. This involves the connection between the contact surfaces (electrodes), the insulated conductive paths between the electrode and the contact point, and the electrical measuring equipment required.

“This, as far as we know, has never been described before. We are completely convinced that this is the solution to a significant bottleneck when it comes to getting the smart textile market going in earnest,” said Emanuel Gunnarsson.

His work has resulted in two different simple ways to produce smart textiles. He demonstrates that sensors can be integrated using standard textile manufacturing methods. The research also includes criticism of some of the methods used to measure the functionality of smart textiles, and advice on how to do it better instead.

“The next natural step will be to see how these garments cope with one of the toughest challenges a garment faces, namely washing. Especially as these garments must be worn closest to the skin, they will need to be washed relatively often,” said Emanuel Gunnarsson.

Studies from other universities indicate that the yarns used to measure signals from the body do not withstand many washes, but after a small pilot study, Emanuel Gunnarsson is hopeful of the opposite.

Under adidas’ ambition to help athletes overcome high pressure moments in sport, it has teamed up with leading sport neuroscientists, neuro11, to understand the impact it has within a game of football, basketball, and golf during penalty shootouts, high-stake putts and must-make free-throws.

Working with Emiliano Martínez, Ludvig Åberg, Nneka Ogwumike, Rose Zhang, and Stina Blackstenius, as well as amateurs in the game, adidas and neuro11 delved into their minds to identify and analyse where pressure peaks, to help athletes across the globe to better understand it.

Understanding from this study that grassroots athletes and their elite counterparts experience similarly intense levels of pressure in the biggest sporting moments - but elite athletes were up to 40% more effective at managing pressure during these moments¹ - a toolbox of techniques has been developed, built from the specific findings, to assist next-gen athletes in managing and overcoming the feeling within their game.

Covering in-depth detail on what pressure looks like within each sport, how it has been proven to impact specific in-game moments, the brain zones that neuro11’s state-of-the-art brain technology measures and the main insights from each athlete’s training session, each report sets out to support all athletes in accessing the optimal zone - the brain state in which they perform at their best.

Rounded off with science-backed tips that reveal the optimal area of a goal to strike a penalty, how to use time to regain focus before netting a free throw, as well as the impact of dwell time on putting in golf – the guides are shaped around enhancing mental focus during some of the most pressured moments across sport.

1 Findings captured during athlete training sessions, as part of adidas SS24 Brand Campaign, in collaboration with neuro11 (November ’23- January ’24). Study carried out with Emiliano Martínez, Ludvig Åberg, Nneka Ogwumike, Rose Zhang, and Stina Blackstenius, in addition to 5 grassroot athletes.

The diabetic community has always been a priority for Hologenix, creators of CELLIANT® infrared technology, so the company embarked on an initial study to test the hypothesis that the technology can positively impact diabetic patients with vascular impairment, now published in Journal of Textile Science & Engineering. Another study is underway as well with more research on the horizon.

According to statistics cited in the International Diabetes Federation Diabetes Atlas, 9th edition, globally, close to a half billion people are living with diabetes and that number is expected to increase by more than 50 percent in the next 25 years.
 
The introduction of the study in the Journal of Textile Science & Engineering also reports that diabetic patients frequently suffer from a combination of peripheral neuropathy and peripheral artery disease, which particularly affects their feet. It further states that it has been estimated that the lifetime risk for the development of foot ulcers in diabetic patients can be as high as 25 percent and that the risk of amputation is 10 to 20 times higher than in non-diabetic subjects.
 
The study was performed by Lawrence A. Lavery, D.P.M., M.P.H., a Professor in the Department of Plastic Surgery at UT Southwestern Medical Center. His clinic and research interests involve diabetic foot complications, infections and wound healing, and he participated in the conception, design, implementation and authorship of the Journal of Textile Science & Engineering study.  

CELLIANT technology is a patented process for adding micron-sized thermo-responsive mineral particles to fibers, in this case polyethylene terephthalate (PET) fibers. The resulting CELLIANT yarns were woven into stockings and gloves containing either 82% CELLIANT polyester, 13% nylon and 5% spandex or for the placebo, 82% polyester with no CELLIANT, 13% nylon and 5% spandex. CELLIANT products absorb body heat and re-emit the energy back to the body as infrared energy, which is non-invasive and increases temporary blood flow and cell oxygenation levels in the body.

The objective of the study was to “evaluate changes in transcutaneous oxygen (TcPO2) and peripheral blood flow (laser Doppler, LD) in the hands and feet of diabetic patients with vascular impairment when CELLIANT gloves and stockings are worn.” While there was not a statistically significant result across all subjects, the study did show that some patients wearing CELLIANT stockings for 60 minutes had an increase of as much as 20% in tissue oxygenation and 30% in localized blood flow. According to the study’s conclusion, “the trends that were observed in favor of CELLIANT stockings suggest that a larger well-designed clinical trial should be undertaken and may provide evidence of clinical efficacy in treatment of the diabetic foot.”
 
The study also notes that “There have been no documented or observed side effects of wearing CELLIANT stockings, and they are relatively inexpensive compared to conventional pharmaceutical interventions.”

Hologenix has embarked on a more comprehensive trial, “Study to Evaluate CELLIANT Diabetic Medical Socks to Increase Tissue Oxygenation and Incidence of Complete Wound Closure in Diabetic Foot Wounds” – NCT04709419, which focuses on the impact of CELLIANT technology to potentially improve tissue oxygenation and wound healing outcomes.
 
“We are excited to explore whether future studies of infrared, with its most common biological effects of increased localized blood flow and cellular oxygenation, could result in a breakthrough in diabetic patients with vascular impairment,” said Seth Casden, Hologenix Co-founder and CEO. “We see a huge potential opportunity with this research for helping to fulfill our core mission of improving people’s health and well-being by potentially reducing the impact of diabetes, and we are actively seeking partners to expand our research efforts.”

By using a high share of recycled content in its Evolon® materials, Freudenberg Performance Materials (Freudenberg) offers technical packaging textiles with a carbon footprint decreased by 35%. An independent LCA study showed additional benefits such as energy resource savings and lower water use. Furthermore, Evolon® fabrics provide sustainability benefits over the packaging entire life cycle thanks to high end performance and durability.

By replacing virgin PET with recycled PET, the cradle-to-gate carbon footprint of Evolon® packaging textile materials decreased by 35%. This is the result of a study by an independent LCA and eco-design consultancy firm, which made a Cradle-to-Gate assessment of several Evolon® products using virgin PET or recycled PET. The study was finalized in 2022 and conducted according to the principles of ISO 14040/ ISO 14044 standards, following the recommendations of the Product Environmental Footprint and the Circular Footprint Formula.

Evolon® microfilament textiles have a small carbon footprint because their manufacturing process uses low CO2 energy sources. The fabrics are lightweight and can be reused throughout entire production programs, e.g. of a car model when it is about the automotive industry. Furthermore, the new Evolon® RE fabrics contain up to 85% of recycled PET which is produced in-house out of post-consumer PET bottles.

Evolon® textiles are suitable for reusable technical packaging, which eliminate the use of thousands of disposable packaging materials. Evolon® fabrics offer scratch-free, lint-free, high-end surface protection for molded plastic parts, painted parts and other sensitive industrial and automotive parts during transport. This contributes to lower the scrap rate of parts and provide both financial and ecological benefits. By using Evolon® reusable packaging to transport highly-sensitive parts, customers can increase their efficiency and save resources.

On March 10th, JEC Group and Composites Expert have signed a partnership agreement to promote E-learning Composites Academy, the first 4.0 training platform dedicated to manufacturing processes of composite materials.

This partnership will start with two first steps: an introduction webinar session on March 15th at 4pm CET, and two sessions of training during JEC World 2022, on Tuesday, May 3rd and Wednesday, May 4th, in Paris where Composites Expert will present the E-learning Composites Academy, a new pedagogical approach aimed at appropriating knowledge of polymer transformation specially developed by Composites Expert.

Tools have been designed to combine the theoretical part (E-Learning course platform) and the practical part (BOXs, software, process simulator, exercises through manipulation) to observe complex phenomena, with the aim of mastering and optimising transformation processes. The aim of this presentation is to introduce people to the learning method and the interactivity of the teaching aids used in industry and education.

“One of JEC Group’s objectives is to develop access to education to help the composites industry to attract and train talented professionals. So, we are very proud to announce this partnership and to support Composites Expert initiatives, as joining common efforts and strategies will benefit to the overall industry”, stated Anne-Carole Barbarin, Content and Product development Director.

“The partnership with JEC Group is a major step towards the development of our training platform, while several manufacturers have already supported us, such as Arkema, Chomarat, Daher, Diatex, Pinette PEI, Porcher, Sopara, joining JEC World to officially launch our platform is an amazing opportunity.”, stated Jean-Pierre Cauchois, CEO Composites Expert.

These training sessions are targeting companies’ employees who would like to improve their expertise, to study professional reconversion, the companies who would like to know more or use composite materials, and universities and school for students to go from theory to practical exercises.

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel Neumarkt was one of eight industrial partners supporting the university team throughout the project, providing all carbon fiber prepreg materials used for the drone’s landing gear as well as the fuselage. The ultra-lightweight 32g landing gear was laid up and cured in the press, whereas the fuselage was autoclave cured by the student team using Hexcel HexPly M901 and HexPly M78.1 prepreg resin systems with a combination of woven and unidirectional carbon fiber reinforcements.

With the development of Unmanned Aerial Vehicles (UAV) as a key emerging market and innovation space in the transportation sector, Hexcel’s collaboration with the University of Applied Sciences Upper Austria team not only creates an important link with the next generation of lightweight composite engineers but also highlights the weight saving and structural benefits of Hexcel composite material solutions.

"The massive weight saving achieved with their updated version of the camera drone is a fantastic achievement by the student team," said Michael Rabl, Dean of FH Wels of the Upper Austria University of Applied Sciences. "The joint study not only illustrates the wide range of complex and innovative composite techniques present in the drone sector but also presents the opportunities that exist for further development in the wider Urban Air Mobility (UAM) and aerospace composites markets.”

Hexcel congratulates the project team which includes Lukas Weninger, Karl-Heinz Schneider, Jakob Schlosser, Matthias Thon, Marla Unter, and Simone Hartl on an exceptional piece of lightweight composite design and thanks them for showcasing the contribution of Hexcel materials with a presentation and drone flight. Johanna Arndt, research and technology group leader at Hexcel Neumarkt, said, “It was a great pleasure to work with the team who were very cooperative and self-motivated to succeed. Watching the drone just fly around the Neumarkt plant was just great.”

Hexcel manufactures a complete range of carbon fibers, dry carbon UD tapes, specialty reinforcements, prepregs, and honeycomb core materials, providing customized manufacturing options for new UAM applications that combine aerospace reliability with the high-rate production required. Hexcel composite materials are the ideal solution for the lightest and most efficient cost-competitive transportation vehicles of the future.

In a roundtable discussion during the recent Innovate Textiles & Apparel (ITA) textile machinery exhibition, imogo Founding Partner Per Stenflo and representatives from a number of like-minded European companies discussed the opportunities for new spray application technologies for the dyeing and finishing sector.

These technologies can achieve tremendous savings for manufacturers compared to traditional water-intensive processes it was explained at the event, held online from October 15-30th.

Pioneer
imogo – one of the latest companies to join TMAS, the Swedish Textile Machinery Association – is one of the key pioneers in this area with its Dye-Max system. Dye-Max spray dyeing technology can slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. This is due to the extremely low liquor ratio of 0.3-0.8 litres per kilo of fabric and at the same time, considerably fewer auxiliary chemicals are required to start with.

Obstacles
Such technologies, however, face a number of obstacles to adoption and during the ITA discussion it was agreed that 2020 has not provided the ideal climate for adventurous investors. “The textile industry is quite conservative and is definitely in survival mode at the moment and it is not the time to be a visionary,” said Stenflo. “Day to day business is about staying alive – that’s the reality for many of our customers.” Nevertheless, all of the panellists agreed that sustainable production will remain top of the agenda for the textile industry in the longer term and spray technologies for dyeing and finishing processes will be a part of it.

“Any investment in something new is a risk of course, and we have to be able to explain and convince manufacturers that there’s a good return on investment, not only in respect of sustainability, but in terms of making good business sense,” said Stenflo. “Here we could use the help of the brands of course, in putting pressure on their suppliers to be more sustainable. Governments also have a role to play, in providing incentives for producers to move in the sustainable direction. Sustainability alone will never cut it, there has to be a business case, or it won’t happen.”

Marketing
The marketing of sustainable new fibers is comparatively easy for the brands compared to explaining the difficult textile processes and the chemistries involved in fabric and garment production, he added.

“These fibers, however, currently go through all the same dirty processes that we need to get away from, so it must happen,” he said. “In developing our technologies, it has been important for us to avoid disrupting existing supply chains, stick with using off-the-shelf chemistries and dyes, and involve the dye manufacturers who are an essential part in how operations are driven today. “In fact, collaboration across the entire textile supply chain – from the brands right back to the new technology developers – is essential in moving the sustainability agenda forward.

Business models
“We are also looking into new business models in terms of how to reduce or lower the thresholds for investment and minimise the risk for the manufacturers who are looking to be the innovators,” he concluded. Also taking part in the ITA roundtable discussion were Simon Kew (Alchemie Technology, UK), Christian Schumacher (StepChange Innovations, Germany) Tobias Schurr (Weko, Germany), Rainer Tüxen (RotaSpray, Germany) and Felmke Zijilstra (DyeCoo, Netherlands).

European innovations
“It’s fantastic that all of this innovation is taking place in Europe based on established know-how and forward thinking,” said TMAS Secretary General Therese Premler-Andersson.

“Spray application technologies are a perfect illustration of how new digital technologies can lead to more sustainable production, in this case by replacing water-intensive processes with the highly precise and controlled application of dyes and chemistries as vapour.
“There was a major project by the Swedish research organisation Mistra Future Fashion recently, involving many brand and academic institute partners. The project’s Fiber Bible 1 and 2 reports conclude that it’s very difficult to make assumptions that one fiber is better than another, because it’s so much about how fabrics and garments are being produced from them. The study also found that 55% of the chemicals used in a garment comes from the dyeing. This is where a number of TMAS companies can make a difference.
“An organic or recycled cotton t-shirt is not automatically more sustainable than a conventional cotton t-shirt, or even one made from synthetics – the alternative fibers are a good start but you have to consider the entire life cycle of a garment, and that includes the smart technologies in textiles production.
“TMAS members – backed by Swedish brands and advanced research institutes – are playing an active part in pushing forward new concepts that will work, and I have no doubt that digitalisation now goes hand in hand with sustainability for the textile industry’s future.”          

Bemberg™ gears up for Première Vision - February 11th-13th, Paris, France; with a great deal of novelties and a key statement on sustainability: Let’s Make it Circular! That’s why the Japanese brand of regenerated cellulose fibers joins the fair with two booths, one in the yarn-focused sector – Hall 6 C52 6D53 – the other one in the Smart Creation area, the curated district showcasing cutting-edge sustainable innovation for the textile and fashion business. Hall3 S14.

“We simply could not miss out on the Smart Creation Area as sustainability is the founding pillar of our company,” says SHUNSUKE SATO, sales manager of Bemberg™ by Asahi Kasei. “Indeed, the smart fiber is made from a cotton linter which is pre-consumer material, a natural derived source, that doesn’t deplete forestry resources. The strategy beyond our double presence is to highlight our deep commitment to responsible innovation to a larger target of professionals.”

Let’s take it circular! is the motto at the Smart Creation booth. The lifespan of Bemberg™’s regenerated cellulose fiber derived from cotton is fully circular: from the source to manufacturing. The whole sustainable closed-loop process is supported by the LCA study, signed by ICEA and validated by Paolo Masoni. Recyclability is granted by the Global Recycle Standard - GRS certification by the renown Textile Exchange. An influential guarantee that involves the whole production process and supply chain behind the company’s smart yarns. Bemberg™ yarns are entirely biodegradable and ecotoxicity-free – meaning that at the end of their life circle they break down into the environment leaving no trace in terms of toxic substances as attested by the Innovhub-SSI report.

On show at Première Vision some of the most recent collaborations with GRS-certified partners such as FIVEOL, SMI TESSUTI, TESSITURA UBOLDI, INFINITY, SIDONIOS, MATIAS & ARAUJO, TINTEX, IPEKER, EKOTEN, for fashion fabrics as well as PEZZETTI and BRUNELLO & G.CRESPI from lining partners.

The first Bemberg™ partner to present a commercial collection enriched by Velutine™ Evo is the Portuguese Matias & Araújo. With an innovative spirit, dynamism and a determined entrepreneurial spirit, the company is a leading knitwear producer for the textile industry.

In the Hall 6 Bemberg™ displays key commercial items developed by premium brands such as CAALO that is making its mark in the outerwear market with its Sustainably produced Functional-Luxury proposal. For SS20, CAALO utilized Bemberg™ lining because of the sustainability properties and it's unique colour.

CAALO looks to utilize as much eco-friendly and sustainable materials as possible without compromising on design or quality. This Bemberg™ lining was a perfect fit.

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

The project was divided into several phases: Phase I was used to identify the current status. In 20 interviews with representative companies of the injection molding industry, the researchers gathered why tape inserts have rarely been taken into account so far, when defining the material concepts to be analyzed. The lack of information about the material class, the procedure and tools for the development process and the necessary production technologies were cited as major challenges. This is where the consortium will take action and provide comprehensive information during the “Technology Information Day” on the extensively prepared state of the art and the high degree of maturity of the supply chain. Based on the status quo, they developed a methodology for analyzing the technological and economic potential of tape inserts in injection molding applications.

Both the previous results and the planned follow-up projects are the subject of the “Technology Information Day" at K 2019, to which the companies involved in the study, the AZL and IKV, invite all companies along the value chain, from raw material manufacturers to injection molders to OEMs. (Date: 18th October 2019, 10:00 am to 1:30 pm, Trade Fair Düsseldorf CCD South, Room 002).

The consortium, amongst others consisting of Asahi Kasei Europe GmbH, BASF SE, Borealis AG, BÜFA Thermoplastic Composites GmbH & Co. KG, ENGEL AUSTRIA GmbH, Huesker Synthetic GmbH, LG Hausys R&D Center, Mitsui Chemicals, Nippon Electric Glass, Polyscope Polymers BV, POLYTEC GROUP, Simcon kunststofftechnische Software GmbH, SABIC and Toray International Europe GmbH, is inviting to the “Technology Information Day” at K 2019. The goal is to inform about the technology and to identify topics for future collaboration.

• New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

As one of the undisputed leaders in the European textile scene, Italy is always a good bellwether of the trends between Europe and China. After a less than stellar 2016, Italy’s fabric exports to the Mainland China and Hong Kong markets grew by 12.4% in the first 10 months of 2017[1]. The expected demand for European brands at Intertextile Shanghai Apparel Fabrics will be most evident in the SalonEurope zone, which features exhibitors from Austria, France, Germany, Italy, Spain, Switzerland, Turkey and the UK, as well as country pavilions & zones from France, Germany, Italy and Turkey.

There is also continuing demand for overseas expertise when it comes to more technical areas such as sustainability and digital printing, solutions to which can be found in the fair’s All About Sustainability area and Digital Printing Zone.

SalonEurope showcases the continent’s full textile expertise
The best of the best from Europe will be on display in this edition’s SalonEurope, with a range of products across the whole textile spectrum on offer. Some of the highlights this edition include:

• Alumo (Switzerland): celebrating its 100-year anniversary this July, Alumo has undertaken a complete refresh of their brand, highlighting the character of their mill in Appenzell, Switzerland that has deep roots in the local textile industry. This edition, they will showcase a renewed collection of luxury shirting fabrics with intricate designs and added functions such as natural stretch and wrinkle-free, and a newly enlarged, never-out-of-stock ‘Sartorial’ collection.
• Hatfil Tekstil Isletmeleri (Turkey): a Turkish-Italian joint venture, they offer a huge range of yarns including eco-friendly options such as organic, BCI and fair trade yarns, as well as cotton, Tencel, Amicor, bamboo, cashmere, modal and other varieties.
• Hohenstein Textile Testing (Germany): offering testing services, OEKO-TEX® services and certifications, the Hohenstein Quality Label and more.
• Ricamificio Paolo Italy SpA (Italy): an embroidery manufacturer, they have developed a new technique using very thin embroideries to produce a lace-like effect, which can also be customised to the customer’s requirements in no more than four weeks. They have also produced a quilt-like fabric suitable for spring / summer garments which is made from materials such as silk organdie, cotton yarn or lurex to produce a shiny effect.
• Teseo Tessitura Serica Di Olmeda SpA (Italy): for their summer 2019 collection, Teseo is inspired by the natural elements with increased attention to sustainability with GOTS-certified bio silk and eco-friendly yarns. New articles are lighter and enriched with yarn-dyes, include jacquard stripes and checks, gauze and devoré bands to add transparency, and more.

New collaboration of sustainable viscose suppliers formed in China
While the textile industry in China still has a long way to go in terms of sustainability, genuine progress is being made at both a government and company level. January of this year saw the implementation of a new environment protection tax, with companies charged for noise, air & water pollution and generating solid waste[2]. Replacing a pollutant discharge fee that had been in place for 40 years, the new tax is set by local governments – with some of the regions suffering from worse pollution setting higher rates – and also incentivises companies with lower emissions.

In another encouraging move, 10 leading global viscose producers in China have come together to form the Collaboration for Sustainable Development of Viscose (CV) to promote the sustainable sourcing and responsible production of viscose. These 10 producers collectively account for over 50% of the world’s viscose staple fibre production, and have partnered with two trade associations to adopt a sustainability roadmap for the viscose industry. Built around credible international sustainability standards and programmes, the CV Roadmap aims to provide guidance to viscose producers on sustainable sourcing and production practices.

The CV collaboration will make its debut appearance in the fair’s All About Sustainability zone, where visitors can learn more about this initiative, as well as sustainable developments in the Chinese textile industry. Apart from an educational programme and garment display area, the zone will also feature a number of exhibitors other than CV.

Digital Printing Zone debuts at Spring Edition
While digital printing is rapidly gaining traction in the global textile industry, this is especially so in China due to its potential to reduce pollution during the production process. Amongst the exhibitors looking to take advantage of this in the fair’s new Digital Printing Zone is MS Italy, a market leader in the design, development and distribution of innovative digital ink-jet printing systems and associated consumables, which serves the high-end, roll-to-roll textile printing and specialty material markets. Also exhibiting is DIGITEX which will introduce the latest digital- and inkjet-printed natural and manmade fabrics.

Apart from digital printing exhibitors, a day-long forum will inform fairgoers on the exciting possibilities of digital printing. Held on day 2 of the fair, the Fast Fashion and Digital Printing Application Forum features sessions on fast fashion technology & trends and digital printing applications. These are followed by a series of discussions on topics such as flexible supply chains, business opportunities created by digital printing and IP protection. The forum also includes a presentation on the findings of a six-month study conducted by Fashion Print, a Chinese publication, for which they visited hundreds of textile companies, printing and dyeing enterprises, as well as their suppliers to produce a research paper on the digital textile printing market and technology.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

• Intertextile Shanghai Apparel Fabrics – Spring Edition 2018 is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

[1] http://hk.fashionnetwork.com/news/Italian-textile-industry-back-on-growth-track-in-2017,944760.html
[2] http://www.fibre2fashion.com/news/textile-news/china-imposes-environment-protection-tax-beginning-jan-1-239965-newsdetails.html