From the Sector

Reset
299 results
Sustainable leadership for GtA with new Monforts Montex wide width lines (c) AWOL Media
GtA Managing Director Andreas Niess
27.07.2020

Sustainable leadership for GtA with new Monforts Montex wide width lines

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Source:

AWOL Media for A. Monforts Textilmaschinen GmbH & Co. KG

Bemberg™ Natural Stretch linings by Gianni Crespi Foderami : “the preciousfabric that naturally stretches without tricks” (c) Bemberg™
Bemberg™ Natural Stretch by Gianni Crespi Foderami s.r.l
27.07.2020

Bemberg™ Natural Stretch linings by Gianni Crespi Foderami

  • “the preciousfabric that naturally stretches without tricks”

Bemberg™ Natural Stretch, the ground-breakingprecious fabric by Gianni Crespi Foderami s.r.l. is the 100% sustainable lining fabric created from a cutting-edge highly engineered process Specialized  in  the  creation  of linings for high quality menswear,   womenswear   and childrenwear,  Gianni  Crespi Foderami  s.r.l.has  teamed  up with Bemberg™, the Japanese brand of regenerated cellulose fibers by leading    materials manufacturer  Asahi  Kasei, to develop a precious 100% Bemberg™ lining with outstanding stretch performance  woven in its DNA.

  • “the preciousfabric that naturally stretches without tricks”

Bemberg™ Natural Stretch, the ground-breakingprecious fabric by Gianni Crespi Foderami s.r.l. is the 100% sustainable lining fabric created from a cutting-edge highly engineered process Specialized  in  the  creation  of linings for high quality menswear,   womenswear   and childrenwear,  Gianni  Crespi Foderami  s.r.l.has  teamed  up with Bemberg™, the Japanese brand of regenerated cellulose fibers by leading    materials manufacturer  Asahi  Kasei, to develop a precious 100% Bemberg™ lining with outstanding stretch performance  woven in its DNA.

Bemberg™ Natural    Stretch was   achieved   thanks   to the leading  Italian  manufacturer’s ability  to  vertically  set  up,  control,  engineer  and  design  a  whole  integrated  production process, ranging from sectional warping the shipment service.Bemberg™  Natural  Stretch  achieve  maximum  flexibility,  resistance,  and  comfort  without the use of elastomers and polyesters. How? The secret is in the process indeed.Elasticity is achieved thanks to a complex way of yarn twisting, weaving, and finishing.Bemberg™  yarns  are  smart,  responsible  and  high-tech.  Made  from  a  cotton  linter  bio-utility material,  the  natural  derived  source  does  not  deplete  forestry  resources. 

The company’s matchless, high-tech natural fibers are characterized by a unique touch and feel as well as unique performances such as moisture control and is antistatic.Bemberg™Natural Stretch: a smart solution for contemporary living.

Source:

GB Network

Oerlikon Barmag: Largest single industrial yarn order (c) Oerlikon Barmag
And the new Oerlikon Barmag systems at Fujian Billion will also be used to manufacture yarns for the automotive sector.
23.07.2020

Oerlikon Barmag: Largest single industrial yarn order

  • Textile yarn manufacturer Fujian Billion kicks off industrial yarn production

Remscheid – from the end of this year, the southern Chinese yarn manufacturer Fujian Billion Polymerization Technology Industrial Co., Ltd. will be producing industrial yarns using systems supplied by Oerlikon Barmag. With this, the company – considered to be the largest polyester yarn manufacturer in southern China – is now also entering the industrial yarn market.

With 124 positions and a capacity of around 250,000 tons per annum, this project is the largest single industrial yarn order placed with Oerlikon Barmag to date. And with this order, the southern Chinese yarn manufacturer instantly positions itself as one of the ten largest Chinese industrial yarn producers. “The systems at Fujian Billion come with our latest draw unit design, which has been optimized for use with Oerlikon Barmag automation solutions”, comments Roy Dolmans, Head of Development for the Industrial Yarn Process. As a result, the newcomer in the industrial yarn sector is now superbly equipped for the future.

  • Textile yarn manufacturer Fujian Billion kicks off industrial yarn production

Remscheid – from the end of this year, the southern Chinese yarn manufacturer Fujian Billion Polymerization Technology Industrial Co., Ltd. will be producing industrial yarns using systems supplied by Oerlikon Barmag. With this, the company – considered to be the largest polyester yarn manufacturer in southern China – is now also entering the industrial yarn market.

With 124 positions and a capacity of around 250,000 tons per annum, this project is the largest single industrial yarn order placed with Oerlikon Barmag to date. And with this order, the southern Chinese yarn manufacturer instantly positions itself as one of the ten largest Chinese industrial yarn producers. “The systems at Fujian Billion come with our latest draw unit design, which has been optimized for use with Oerlikon Barmag automation solutions”, comments Roy Dolmans, Head of Development for the Industrial Yarn Process. As a result, the newcomer in the industrial yarn sector is now superbly equipped for the future.

The well-known company – located in the Chinese Fujian Province – will be predominantly manufacturing high-tenacity (HT) and low-shrinkage (LS) yarns from the end of this year. These sophisticated yarns are deployed both in the automotive, geotextiles and safety sectors (HT yarns) and in the manufacture of coated industrial textiles such as truck tarpaulins and tents (LS yarns).

Founded in Jinjiang, Quanzhou, in 2003, Fujian Billion Polymerization Technology Industrial Co., Ltd. is one of the top 500 privately-owned enterprises in China. Annually, the yarn manufacturer produces around 2.8 million tons of filament yarn and ethylene-propylene side-by-side (ES) fibers.

Digitak services always in fashion with Mimaki sublimation and direct printing (c) Mimaki
Filippo Taccani, founder and owner at Digitak, in the company’s production department, surrounded by an arsenal of Mimaki’s printing solutions.
01.07.2020

Digitak services always in fashion with Mimaki sublimation and direct printing

  • Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
  • With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

  • Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
  • With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

Making production versatility one of the cornerstones of its philosophy, Digitak has continued to invest in technology, as well as research and development its product portfolio. This forward-thinking approach has enabled the company to guarantee innovative, personalised products with meticulous attention to detail, with the highest – almost obsessive – standards of quality and maximum design flexibility. Over the years, the extensive experience gained by the company’s management in the field of sublimation with traditional and digital techniques, combined with their investment decisions have allowed Digitak to enhance its production performance, gradually implementing higher quality standards and differentiating itself from the competition in the complex and competitive sector of high fashion. An important feat, which has not, however, dampened its enthusiasm and willingness to continue growing and exceeding its goals. The company’s latest investment in a direct-to-fabric digital printing line with pigment ink propels the company into a new and promising production dimension.

Sublimation printing specialists

Since Digitak’s establishment, Filippo Taccani, the founder and current owner of the company, had set himself a clear and ambitious objective: “I wanted to take up the challenge of operating digitally - printing fabrics using this innovative technology to create products on a par with those  I had achieved with traditional sublimation textile printing methods during my previous work experience.”

The purchase of a Mimaki JV4 plotter, one of the first to be installed in Italy, marked the beginning of Digitak’s adventure. “To start the business, I needed a printing system that could operate with dispersed inks to print on polyester and I found the JV4 to be the best option,” explains Taccani. “It was an excellent decision, because I used these plotters to build the company and its success.”

The first Mimaki plotter was in fact followed by a second and a third. When it bought the fifth, the company moved to an industrial unit in Tradate (Varese) – Digitak’s current site – which now houses around fifteen Mimaki JV33 plotters, in addition to three Mimaki TS500-1800 wide-format sublimation printers, and a Mimaki TS300P-1800 high-speed sublimation printer. This Mimaki powered production facility – which is one of the company’s core strengths – was recently expanded with the addition of a Mimaki TX300P-1800B belt-type hybrid printing system, together with a Mimaki TR300-1850C textile coater and a Mimaki Tiger-1800.

“Naturally, over the years, we have also tested printing systems from other suppliers, but we have always returned to Mimaki. With high fashion as our key market, we need to guarantee our customers the highest levels of quality and, to date, we have never found solutions that beat the quality of this Japanese brand’s technology.”

According to Taccani, the difference lies in the “calligraphy” of Mimaki’s machines, that is the line of the ink on the fabric: “Unlike its competitors, Mimaki has focused on the ‘waveforms’, i.e. the electronics associated with the print heads. This attention paid to the way the ink jet is managed from the print head has allowed Mimaki to achieve unparalleled levels of accuracy, an aspect that has given my company a clear competitive edge.”

Moreover, at Digitak, quality comes before quantity: “We prefer to dedicate an extra day to production to guarantee the customer a final product that fully meets requirements and expectations. Mimaki’s technology not only suits this business model bult on top quality, but it crucially enables it.”

Operational and creative flexibility

Digitak currently prints around 2,000 linear metres of fabric per day. Its portfolio ranges from clothing and scarves, to beach and swimwear, with related personalised accessories, to sportswear, with technical properties such as breathability, comfort, resistance to external agents. The company have even added customised outdoor furniture to their offering of diverse and creative products.
The company’s machines operate continuously, 24/7. During the day, the machines are mainly used to develop and produce samples and colour proofs, while the actual production is carried out at night. “Thanks to our technology, we have developed an extraordinary operational flexibility. The fact that we have so many plotters allows us to work on multiple designs at the same time and to launch projects that are also very different from one another,” explains Taccani. “There are also some other crucial factors that have contributed, and continue to contribute, to increasing our production efficiency. The reliability of Mimaki’s solutions and the remote monitoring option offered is key. Once the standard start-up monitoring has been carried out and the machines are found to be printing correctly, we can let them work overnight without an operator. This is a great benefit for people who, like us, manage such a large and diverse fleet of machines.”

Digitak takes the same approach to customer service. Faced with an increasingly demanding market in terms of creativity, precision and completeness of service, the company wants to guarantee flexibility and customisation. “We decided to set up a department dedicated to the pre-press stage, in charge of preparing and checking the files supplied by customers. Seldom do our teams not need to do some editing of the files supplied, even if it’s only to make small changes that are essential for the print document to be as suitable as possible and to achieve the best final result.”

Technologies of the future

With a view to further enhancing production and customer service, Taccani has chosen to take on a new challenge, switching things up with some of the most recent investments.

While maintaining the focus on dye sublimation printing, Taccani has focused on technological diversification by installing a direct-to-fabric digital printing line. This consists of a Mimaki TX300P-1800B printing system with pigment inks and a TR300-1850C coater from Mimaki’s TR series. “The market continues to evolve and now requires even more flexibility regarding both processes and the fabrics supplied. This means that great opportunities exist for a print shop capable of simultaneously producing the same design – with minimal colour adjustment – on different fabrics, guaranteeing similar and accurate results. And this is precisely the path we are taking,” says Taccani. “Why have we opted for Mimaki again? Well, I had an opportunity to try out their new pigment inks and I immediately realised that they are a generation ahead of the other pigments available on the market. The cyan is very clean, the black is deep and there is a very interesting fullness of colour, suitable not only for furnishings, but also for other applications in the clothing sector.”

With its pigment inks, the new direct-to-fabric printing line allows Digitak to explore other related market segments. Thanks to the innovative automatic belt system, the TX300P-1800B guarantees good productivity and high-quality results. A standard of quality that is also boosted by the TR300-1850C fabric pre-treatment system: “This coater is essential for ensuring the best possible preparation of fabrics for printing. In fact, we are able to treat fabrics to make them suitable for the type of print they are intended for, sanitise them for specific applications and, in some cases, even dye them, with excellent quality.”

According to Taccani, another beneficial factor of direct-to-fabric pigment printing technology is the eco-sustainability of the process and its lower environmental impact. “We are proud to be able to offer our customers excellent printing results using little water and printing in ‘green mode’, with both the technologies we have available. I consider them winning technologies for the future, as both dye sublimation printing and direct-to-fabric printing with pigment inks use little water while mainly requiring the use of energy. Therefore, if you use renewable energy, then you’re done.”

Digitak’s other trump card is the Tiger-1800 installed in 2019. With this industrial printing system, the company aims to increase production volumes while maintaining its high-quality standards and further optimising costs. “We are excited to have these promising technologies available to us in-house. We are currently experimenting with these solutions, testing new opportunities and evaluating which paths to take to stay ahead of the game,” concludes Taccani.

 

Source:

Mimaki Europe B.V.

Monforts denim mills move hemp into the mainstream © Cone Denim
Cone Denim Sweet Leaf jeans.
30.06.2020

Monforts denim mills move hemp into the mainstream

  • There is an urban legend that hemp canvas was used to make the very first pair of Levi’s jeans.
  • While this is a myth that originated in the counterculture of the 1960s, hemp is without doubt the fibre of the moment for the denim industry.

At the second Kingpins24 virtual denim show that was broadcast from New York on June 23rd and 24th, the sustainable benefits of hemp fibre were referenced by many Monforts customers who are now including it in their collections, including AGI Denim, Artistic Milliners, Black Peony, Calik, Cone Denim, Naveena Denim Mills (NDM) and Orta.

“Hemp is an easy to grow fibre which requires no irrigation, no fertilizers, no herbicides and no chemicals,” says Allan Little, Director of Product Development for Cone Denim, which has recently launched its Sweet Leaf collection featuring the fibre. “Significantly, it also uses fifty per cent or even less water than cotton in cultivation.”

It can also bring some new aesthetics to denim too, he adds.

  • There is an urban legend that hemp canvas was used to make the very first pair of Levi’s jeans.
  • While this is a myth that originated in the counterculture of the 1960s, hemp is without doubt the fibre of the moment for the denim industry.

At the second Kingpins24 virtual denim show that was broadcast from New York on June 23rd and 24th, the sustainable benefits of hemp fibre were referenced by many Monforts customers who are now including it in their collections, including AGI Denim, Artistic Milliners, Black Peony, Calik, Cone Denim, Naveena Denim Mills (NDM) and Orta.

“Hemp is an easy to grow fibre which requires no irrigation, no fertilizers, no herbicides and no chemicals,” says Allan Little, Director of Product Development for Cone Denim, which has recently launched its Sweet Leaf collection featuring the fibre. “Significantly, it also uses fifty per cent or even less water than cotton in cultivation.”

It can also bring some new aesthetics to denim too, he adds.

“Hemp has a unique colour and adds a different cast to our indigo, the drape and texture of the fabrics is different and it even adds  a bit of a unique hand, so combined with its sustainable credentials we are proud to be bringing the Sweet Leaf collection to the market.”

US supply chain

Cone is currently sourcing its hemp from France, but with much of its manufacturing now in Mexico – and with the introduction of the US Farm Bill in 2018 which has legalised the growing of legal hemp – is exploring the possibility of investing in the US supply chain.

“With US hemp we’re really at the R&D phase,” Little emphasises. “It’s a unique crop, so coming up with the right stalk to provide the right fibre is challenging. We’ve experimented with different types of seed and various methods of decortication.”

Decortication, he explains, is the mechanical removal of the outside layer of the hemp stalk to useable fibre on the inside. A second process, cottonization, is necessary to make the fibre suitable for spinning, because compared to cotton, hemp is longer, stiffer, and less flexible.

100% success

At the end of 2019, Naveena (NDM), headquartered in Karachi, introduced fabrics featuring up to 51% hemp content in blends with Tencel and recycled polyester and this year has developed the first 100% hemp denims.

“The response to the fabrics we showed last year was incredible and we were looking forward to the response to this latest development – which everyone was asking for – at the Kingpins show in Amsterdam, which unfortunately was unable to go ahead,” says NDM’s Director of Marketing Rashid Iqbal. “We produced initial samples in an undyed state because we were not sure how the wet spun yarn would react in the dyeing, but I’m happy to say we have had success in this respect and are now able to provide one hundred per cent indigo dyed hemp denim.”

Environmental benefits

“Differentiation is the key in the highly-competitive denim industry and we have assisted our customers with trials and optimised processing parameters for a range of different fibres, including hemp, both at our Advanced Technology Centre in Germany and at their own mills around the world,” says Hans Wroblowski, Monforts Head of Denim. “Given the environmental benefits of hemp, and the liberalisation of its cultivation in many parts of the world, the interest in it now comes as no surprise. We have the technologies and know-how to help our customers to fully maximise their hemp denims at all post-weaving stages of production.”

Monforts has a dominant position in the field of denim finishing with its well proven Montex stenters. It has been enjoying further recent success with its Eco Line concept based on two key technology advances – the Eco Applicator and the Thermo Stretch.

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing.

The CYD system also integrates new functions and processes into the weaving preparation processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre.

18.06.2020

Oerlikon: Commissioning of polycondensation system rounds off total industrial yarn solution

The Oerlikon Barmag Huitong Engineering joint venture, part of the Oerlikon Manmade Fibers segment, recently commissioned a polycondensation system which feeds a polyester industrial yarn system. The future operator will be industrial yarn manufacturer Jiangsu Solead New Material Group Co. Ltd., which is placing its trust in the Oerlikon Manmade Fibers ‘From Melt to Yarn’ total solution philosophy.

The Oerlikon Barmag Huitong Engineering joint venture, part of the Oerlikon Manmade Fibers segment, recently commissioned a polycondensation system which feeds a polyester industrial yarn system. The future operator will be industrial yarn manufacturer Jiangsu Solead New Material Group Co. Ltd., which is placing its trust in the Oerlikon Manmade Fibers ‘From Melt to Yarn’ total solution philosophy.

This successfully concludes the first phase of this major project. Oerlikon Barmag Huitong Engineering installed the polycondensation system, which has a capacity of 600 tons a day, at Jiangsu Solead New Material Group Co. Ltd. in the Chinese Jiangsu Province. This will be connected to an Oerlikon Barmag industrial yarn spinning system with a 350-ton-a-day capacity. The new systems will be deployed to produce predominantly high-tenacity (HT) yarns for use in agricultural, infrastructure, transport, security and outdoor applications. These systems can be used to manufacture yarns with up to 3 x 6,600 dtex of high yarn quality with simultaneously high production efficiency. Furthermore, low-shrinkage yarns for coating textiles and so-called LDI yarns (high-tenacity, low-denier industrial yarns) for industrial sewing yarns, among other things, are also manufactured.

Source:

Oerlikon

Logo Mimaki
Mimaki starts to produce masks
29.04.2020

Energiapura: production of masks

Energiapura – Production of reusable, customised protective masks that are also fashion accessories

Energiapura – Production of reusable, customised protective masks that are also fashion accessories

  • The Italian company, a specialist manufacturer of functional sportswear, conducted research and began producing masks in response to the COVID-19 crisis
  • Using Mimaki sublimation printers, the masks can be customised, getting away from their connotation with hospitals and transforming them into a fashion accessory

From functional sportswear to combatting the spread of the Coronavirus: Energiapura, an Italian company has developed a mask that meets the Class I medical device requirements. The EP PA 2020 (Energiapura Pure Air) facial device, optimised for air filtering and breathability, provides protection while working, and can be reused. But Energiapura has gone even further, branding and customising the masks with sublimation printing.
The EP PA 2020 mask, compliant with 93/42 EEC Medical Devices – Class I washable, meets the essential requirements of UNI EN 14683:2019. Having redirected the manufacturing process, Energiapura is now stepping up production levels to meet the rising demand from hospitals, pharmacies, chemists, companies and consumers.

Pure Air, Energiapura’s mask
The EP PA 2020 is based on a functional concept: protection, breathability and reusability are the main principles. EP PA 2020 is made up of three layers of fabric: the first, the outer layer, is DWR-treated polyester, the second is TNT polyester, providing a filtering function, and the third, which comes into contact with the face, is polyester containing special fibres, such as coolmax and carbon.  Therefore it can be reused via normal washing and steam ironing, which also sterilises it.
The CEO of Enegiapura, Alberto Olivietto explains the idea of the customisation of the mask: “We wanted to disassociate our masks from the hospital image. By decorating them with company branding and designs provided by customers.” This is where the Mimaki JV300 wide-format printer comes in.

 

More information:
corona virus face masks
Source:

(c) Mimaki Europe B.V.

Primary Vittorio Segramora of San Gerardo Hospital with a nurse wearing one of the 1,800 donated gowns (c) GB Network
Primary Vittorio Segramora of San Gerardo Hospital with a nurse wearing one of the 1,800 donated gowns
29.04.2020

Call to action of the fashion world

  • Diana, Giusy, Simona and Marina. The call to action of the fashion world was born from four women engaged in the field of sustainability. On the occasion of Fashion Revolution Week, we tell you their story and the results achieved

A task force of Italian textile companies active in our area supported the first call to action launched at the fashion world by four women who have always been involved in the field of sustainability. The appeal launched on March 19th by the green journalist Diana de Marsanich, Giusy Bettoni, founder and CEO of C.L.A.S.S.

  • Diana, Giusy, Simona and Marina. The call to action of the fashion world was born from four women engaged in the field of sustainability. On the occasion of Fashion Revolution Week, we tell you their story and the results achieved

A task force of Italian textile companies active in our area supported the first call to action launched at the fashion world by four women who have always been involved in the field of sustainability. The appeal launched on March 19th by the green journalist Diana de Marsanich, Giusy Bettoni, founder and CEO of C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy)the eco multi-platform hub specialized in integrating a new generation of eco values into fashion, products and companies, Simona Roveda, Editorial Director and Director of Institutional Communication of LifeGate and Marina Spadafora, Italian Country Coordinator of Fashion Revolution and currently collaborating with Luxury Fashion Brands to implement responsible strategies in their companies have luaunched a call-to-action project which has brought together textile companies to manufacture PPE garments for the medical staff working in San Gerardo Hospital in Monza, near Milan.

The companies that answered the call-to-action are: Filo d’Oro, Mantero, ROICA™ by Asahi Kasei, C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy) e Zerobarracento, Iluna Group, Lg Electronics, Jimmy Lion, Personal Genomics, Isamar Holyday Village, Marcolin Eyewear, Maglificio Ripa.

During the last weeks the 4 women collected about 1,800 non-drip cotton and non-woven TNT gowns for sanitary use, about 400 protective masks for multipurpose washable, bacteriostatic, breathable and water-repellent prevention, 1,000 washable cotton surgical caps, 150 complete protective googles eye masks, two microwave ovens for hospital departments to offer support to medical and healthcare personnel by helping them in the few breaks during the grueling shifts of this period, a supply of samples of cotton socks, 300 cotton masks + polyester outer layer, water-repellent and antibacterial, and free weekly stays made available to doctors, nurses, civil protection personnel and families with related children involved in the Covid-19 pandemic.

Source:

GB Network Marketing Communications Srl

 

Logo Parkdale Mills
Parkdale Mills supply swabs for covid-19 tests
20.04.2020

Parkdale Mills Collaborates to Supply Swabs for Coronavirus Tests

Parkdale Mills Collaborates with FDA, Gates Foundation and Others to Supply Swabs for Coronavirus Tests

Parkdale Mills subsidiary U.S. Cotton has joined in an effort with the Food & Drug Administration (FDA), the Gates Foundation, UnitedHealth Group and Quantigen to ramp up production of spun synthetic swabs to help the country’s frontline health care workers administering tests for the COVID-19 disease.

U.S. Cotton has developed a fully synthetic, polyester-based Q-tip-type swab that can be used in coronavirus diagnostic testing.  The U.S. Food and Drug Administration just announced that these synthetic swabs – with a design similar to Q-tips – could be used to test patients for the coronavirus.
U.S. Cotton, based in Cleveland, Ohio, plans to leverage its large-scale manufacturing capacity to rapidly increase production of large quantities of the polyester swabs, which are in short supply for testing kits across the country.

Parkdale Mills Collaborates with FDA, Gates Foundation and Others to Supply Swabs for Coronavirus Tests

Parkdale Mills subsidiary U.S. Cotton has joined in an effort with the Food & Drug Administration (FDA), the Gates Foundation, UnitedHealth Group and Quantigen to ramp up production of spun synthetic swabs to help the country’s frontline health care workers administering tests for the COVID-19 disease.

U.S. Cotton has developed a fully synthetic, polyester-based Q-tip-type swab that can be used in coronavirus diagnostic testing.  The U.S. Food and Drug Administration just announced that these synthetic swabs – with a design similar to Q-tips – could be used to test patients for the coronavirus.
U.S. Cotton, based in Cleveland, Ohio, plans to leverage its large-scale manufacturing capacity to rapidly increase production of large quantities of the polyester swabs, which are in short supply for testing kits across the country.

The FDA has determined that spun synthetic swabs can be used in COVID-19 testing based on the results from a clinical investigation stemming from its collaboration with UnitedHealth Group, the Gates Foundation and Quantigen.  

This is the second major COVID-19 relief project that Parkdale has helped. Earlier Parkdale constructed a supply chain that includes Hanes, Fruit of the Loom, and many other U.S. companies in the production of PPE masks needed by frontline medical staff treating the virus.

More information:
corona virus NCTO USA
Source:

NCTO

Beaulieu International Group and Greencare (c) Beaulieu International Group
Beaulieu International Group and Greencare
16.04.2020

Tessutica produces furniture upholstery from recycled marine waste

Beaulieu International Group (B.I.G.)’s Tessutica business is proud to announce a new product line in upholstery. Greencare fabrics are created from pellets that come from marine plastic waste. The fabrics themselves can then be 100% recycled into pellets again.

The new Greencare collection is made with 100% recycled and recyclable upholstery fabrics and is certified with the the Global Recycle Standard (GRS) label. The company used recycled yarns from regular post-consumer PET bottles from the oceans, landfills and upcycled cotton from garments.
For this, Tessutica partnered with the Seaqual project, which brings plastic waste back into the manufacturing chain. Through the recycling process there is no usage of new petroleum which decresases the CO₂  emissions significantly compared to the use of virgin polyester.

With growing demands for sustainability within the business world as well as from end-consumers, Tessutica felt it was the right choice to offer a product line that comes with a full guarantee of environmental consciousness.

 

Beaulieu International Group (B.I.G.)’s Tessutica business is proud to announce a new product line in upholstery. Greencare fabrics are created from pellets that come from marine plastic waste. The fabrics themselves can then be 100% recycled into pellets again.

The new Greencare collection is made with 100% recycled and recyclable upholstery fabrics and is certified with the the Global Recycle Standard (GRS) label. The company used recycled yarns from regular post-consumer PET bottles from the oceans, landfills and upcycled cotton from garments.
For this, Tessutica partnered with the Seaqual project, which brings plastic waste back into the manufacturing chain. Through the recycling process there is no usage of new petroleum which decresases the CO₂  emissions significantly compared to the use of virgin polyester.

With growing demands for sustainability within the business world as well as from end-consumers, Tessutica felt it was the right choice to offer a product line that comes with a full guarantee of environmental consciousness.

 

Oerlikon logo (c) Oerlikon
Oerlikon logo
17.03.2020

Oerlikon wins three large manmade fibers orders in China

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

The systems business in China remains largely unchanged despite the short-term interruption caused by the coronavirus epidemic following the Chinese New Year celebrations. Long-term project planning for major customers in the manmade fibers industry has resulted in new major orders being placed with Oerlikon Barmag. One of the three new orders, valued at more than CHF300million (EUR282million), is the largest order ever received by Oerlikon Barmag, based in Remscheid, Germany.

The comprehensive manmade fibers technology solutions by Oerlikon are used along the entire value chain in polyester yarn manufacturing and contain cutting-edge automation and digitalization technologies. Oerlikon’s innovative technologies will enable the three Chinese companies to increase their production capacities for polyester yarn and to remain competitive. Oerlikon Barmag will provide the entire system for WINGS POY and WINGS FDY, as well as the texturing machines from the eFK product family in phases over a period of slightly over two years.


 

Source:

Oerlikon

perPETual und Polygenta produzieren rPET FDY auf WINGS von Oerlikon Barmag (c) Oerlikkon
perPETual und Polygenta produzieren rPET FDY auf WINGS von Oerlikon Barmag
12.03.2020

perPETual and Polygenta manufacture using Oerlikon's WINGS

The Indian yarn manufacturer Polygenta, specialized on the manufacturing of sustainable recycling yarns, recently commenced production of recycled polyester FDY yarns at its facilities in Nashik. The yarn is produced using a combination of perPETual Global Technologies patented chemical recycling technology and Oerlikon Barmag’s direct spinning system equipped with the 32-end WINGS concept.

The spinning plant was commissioned by Oerlikon Textile India technologists in close collaboration with the process experts at Oerlikon Barmag, with various FDY products currently being developed. The yarn produced caters to the requirements of premium-segment clients demanding high quality, cost effective sustainable solutions.

The Indian yarn manufacturer Polygenta, specialized on the manufacturing of sustainable recycling yarns, recently commenced production of recycled polyester FDY yarns at its facilities in Nashik. The yarn is produced using a combination of perPETual Global Technologies patented chemical recycling technology and Oerlikon Barmag’s direct spinning system equipped with the 32-end WINGS concept.

The spinning plant was commissioned by Oerlikon Textile India technologists in close collaboration with the process experts at Oerlikon Barmag, with various FDY products currently being developed. The yarn produced caters to the requirements of premium-segment clients demanding high quality, cost effective sustainable solutions.

As one of the world’s first companies, Polygenta has, since 2014, been producing 100% recycled POY and DTY from post-consumer PET using the patented chemical recycling process developed by perPETual Global Technologies. perPETual’s process reduces CO2 impact by more than 66% compared to virgin PET. The yarn is spun using Oerlikon Barmag systems and equipment. As a result, Polygenta is able to produce a wide range of DTY and FDY yarns that comply with the Global Recycled Standard (GRS).

More information:
Oerlikon
Source:

Oerlikon

ISKO logo
ISKOs shared its R-TWO Platform
11.03.2020

ISKO shared R-TWO™ at Drapers Sustainable Fashion Forum

ISKO presented its 100% responsible platform, R-TWO™.

The denim ingredient brand hosted a special panel to discuss some of the advancements in technology that are making the fashion industry more responsible: from R-TWO™ to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, ISKO was the headline sponsor at The Drapers Sustainable Fashion Forum brings together responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

ISKO presented its 100% responsible platform, R-TWO™.

The denim ingredient brand hosted a special panel to discuss some of the advancements in technology that are making the fashion industry more responsible: from R-TWO™ to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, ISKO was the headline sponsor at The Drapers Sustainable Fashion Forum brings together responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.
As evidence of its Responsible Innovation™ approach, ISKO presented the R-TWO™ program, its latest
responsible achievement. Stemming from the mill’s holistic vision, R-TWO™ represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its  environmental performance.
The R-TWO™ reduces the amount of raw material sourced by using a blend of reused cotton and recycled polyester – both certified –, improving sourcing efficiency throughout the entire field-to-fabric production.
Reused cotton is certified with the Content Claim Standard – or CCS – from the Textile Exchange. As for recycled polyester, it can be either Recycled Claim Standard (RCS) or Global Recycled Standard (GRS) certified, depending on the content percentages. Together with this cutting-edge and fully responsible program, ISKO also uses automated laser
technology developed in partnership with Jeanologia.

“How technology can help make the fashion industry more sustainable”:
On March 11th, ISKO hosted a discussion about ways, to make the fashion industry more responsible
The panel was moderated by David Shah, consultant on design and marketing development, Publisher and CEO at Metropolitan Publishing BV and Associate Professor at ARTez (Arnhem, the Netherlands) and Associate Professor at Renmin University, (Beijing, China). The talk involved Keith O’Brien, ISKO Marketing & Business Development Manager, Victoria Soto, Jeanologia Custom Technology Consultant and Filippo Ricci, Fashion Open Studio Program & Partnership Manager.

 

Source:

Menabò Group, Global Press and PR Support

TERASIL® BLUE W DYE (C) Huntsman Corporation
11.03.2020

HUNTSMAN TEXTILE EFFECTS introduces TERASIL® BLUE W DYE

  • Technology for dyeing polyester and its blends

TERASIL® BLUE W high wash fastness dye raises operational excellence of mills, providing right-first-time results leading to savings of water, energy and costs.

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to the TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high performance sportswear and athleisure wear.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

  • Technology for dyeing polyester and its blends

TERASIL® BLUE W high wash fastness dye raises operational excellence of mills, providing right-first-time results leading to savings of water, energy and costs.

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to the TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high performance sportswear and athleisure wear.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

TERASIL® BLUE W is developed by Huntsman Textile Effects to provide the leading solution for meeting industry’s wash fastness requirements. TERASIL® BLUE W offers an attractive shade and high build-up for deep blues which stays vibrant. TERASIL® BLUE W also provides quality assurance as products are bluesign® approved and suitable for STANDARD 100 by OEKO-TEX® certified textile products.

Source:

Huntsman Corporation

TERASIL BLUE W (c) HUNTSMAN
TERASIL BLUE W
11.03.2020

HUNTSMAN TEXTILE EFFECTS INTRODUCES TERASIL® BLUE W DYE

A BREAKTHROUGH TECHNOLOGY FOR DYEING POLYESTER AND ITS BLENDS

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to our TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high-performance sportswear and athleisure wear. TERASIL® BLUE W stands out as the leading disperse wash fast blue dye in the market which is not sensitive to reduction, leading to higher reproducibility, right-first-time results and operational excellence.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

A BREAKTHROUGH TECHNOLOGY FOR DYEING POLYESTER AND ITS BLENDS

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to our TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high-performance sportswear and athleisure wear. TERASIL® BLUE W stands out as the leading disperse wash fast blue dye in the market which is not sensitive to reduction, leading to higher reproducibility, right-first-time results and operational excellence.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

With cutting-edge disperse dye technology at its heart, TERASIL® BLUE W is developed by Huntsman Textile Effects to provide the leading solution for meeting industry’s wash fastness requirements. TERASIL® BLUE W offers an attractive shade and high build-up for deep blues which stays vibrant. TERASIL® BLUE W also provides quality assurance as products are bluesign® approved and suitable for STANDARD 100 by OEKO-TEX® certified textile products(1).

More information:
Huntsman Textile Effects
Source:

HUNTSMAN

Michael Roellke, Volker Schmid, Jochen Adler und André Wissenberg (von links nach rechts) bei der Podiumsdiskussion zusammen mit Sudipto Mandal aus der indischen Niederlassung. (c) Oerlikon Manmade Fibers
Michael Roellke, Volker Schmid, Jochen Adler und André Wissenberg (von links nach rechts) bei der Podiumsdiskussion zusammen mit Sudipto Mandal aus der indischen Niederlassung.
27.02.2020

Oerlikon Manmade Fibers segment sets a trend with three Customer Days in India

Technology transfer that is creating waves

For more than a decade now, the Manmade Fibers segment of the Swiss Oerlikon Group has been hosting a comprehensive technology symposium at the beginning of each year in the Indian region around Silvassa/Daman. Numerous Indian manmade fiber producers have settled in this area, around a four-hour drive north of Mumbai. Fed from Oerlikon polycondensation and extrusion systems, these companies manufacture polyester, nylon and polypropylene on large-scale installations with Oerlikon Barmag WINGS POY, WINGS FDY, IDY and DTY product lines and using Oerlikon Neumag’s staple fiber and BCF technologies. Reason enough for the Manmade Fibers segment’s experts to regularly provide their clientèle with detailed specialist presentations in India on the latest developments of the product and service portfolio.

Technology transfer that is creating waves

For more than a decade now, the Manmade Fibers segment of the Swiss Oerlikon Group has been hosting a comprehensive technology symposium at the beginning of each year in the Indian region around Silvassa/Daman. Numerous Indian manmade fiber producers have settled in this area, around a four-hour drive north of Mumbai. Fed from Oerlikon polycondensation and extrusion systems, these companies manufacture polyester, nylon and polypropylene on large-scale installations with Oerlikon Barmag WINGS POY, WINGS FDY, IDY and DTY product lines and using Oerlikon Neumag’s staple fiber and BCF technologies. Reason enough for the Manmade Fibers segment’s experts to regularly provide their clientèle with detailed specialist presentations in India on the latest developments of the product and service portfolio.

And this was once again the case at the event held at the beginning of 2020, where around 450 managers and employees from local businesses took the opportunity to exchange ideas and information. For the third time in succession, Oerlikon also entered into dialog with the next generation of managers at major Indian polyester and nylon manufacturers in a separate event hosted in Mumbai beforehand. The technology symposium was again held – for the very first time – just a few days later and in a slightly modified form at a second venue: in Kolkata in West Bengal, a potential second future key location for manufacturing manmade fibers in India according to plans revealed by the Indian government. Here, the discussions held by the Oerlikon experts focused above all on the transfer of technologies for manufacturing polyester, nylon and polypropylene. Oerlikon is able to offer the entire process chain – from the melt to the textured yarn or the fibers and including the necessary semi- and fullyautomated logistics process – from a single source. This is of interest above all for potential new customers and investors in West Bengal and neighboring Bangladesh, as some do not have decades of expertise in manufacturing manmade fibers, as is the case for most companies in the region around Silvassa/Daman.

 

Source:

Oerlikon Manmade Fibers

25.02.2020

ISKO: Reloved hits Milan Fashion Week

Featuring the innovative ISKO’s R-TWO™ program, the collection has a new take on sustainability: it relies on fabrics made of reused and recycled materials as well as an advanced design research for the development of a new, conscious style.

Sustainability through the use of highly responsible materials and the experimentation of fits: this is Reloved, the new collection developed by haikure in partnership with leading denim ingredient brand ISKO. Presented with an exclusive preview during Milan Fashion Week, it is an act of love for the planet, the environment and the people.

The project perfectly embodies all the values that made the longstanding partnership between the two brands possible – a responsible approach to innovation and the development of cutting-edge concepts.

Taking into account both materials and design, Reloved features the pioneering ISKO’s R-TWO™ program, which relies on a blend of reused cotton and recycled polyester.

Featuring the innovative ISKO’s R-TWO™ program, the collection has a new take on sustainability: it relies on fabrics made of reused and recycled materials as well as an advanced design research for the development of a new, conscious style.

Sustainability through the use of highly responsible materials and the experimentation of fits: this is Reloved, the new collection developed by haikure in partnership with leading denim ingredient brand ISKO. Presented with an exclusive preview during Milan Fashion Week, it is an act of love for the planet, the environment and the people.

The project perfectly embodies all the values that made the longstanding partnership between the two brands possible – a responsible approach to innovation and the development of cutting-edge concepts.

Taking into account both materials and design, Reloved features the pioneering ISKO’s R-TWO™ program, which relies on a blend of reused cotton and recycled polyester.

During the processing of raw cotton into yarn, for every 100 kilos of cotton approximately 10% is lost. ISKO collects it and prevents it from becoming waste, adding it back into the spinning process obtaining cotton that is fully traced, documented and audited. This verification process has been invented by ISKO in partnership with its yarn supplier Sanko, offering full clarity into the traceability of reused cotton from field to fabric. It is also certified with the Content Claim Standard – or CCS – of the Textile Exchange.

Recycled polyester comes from clear plastic bottles or, alternatively, it can come from other certified waste: in either case the source material is collected, sorted, stripped of labels and caps, and cleaned to be ground into plastic pellets. These can then be re-spun into new fiber filaments.

Depending on the content percentages, for the recycled polyester ISKO can provide either the Recycled Claim Standard (RCS) or Global Recycled Standard (GRS) certifications, both of which track the recycled raw material through the supply chain from input to final product to verify its integrity.

Designed to tackle over-sourcing, the platform improves the environmental performance impact of yarn-to-fabric production. As ISKO’s latest responsible evolution, ISKO’s latest responsible evolution has resulted also in the perfect solution to enhance the responsible character of the Reloved collection.

The collection’s fresh and innovative take on style combines unisex concepts and oversized fits, is available in one shade of color featuring a variety of prints and is crafted with the planet and its inhabitants in mind. To provide full clarity and traceability from field to shelf, materials and processes are kept under the control of Made By, an independent agency that controls the social and environmental conditions of all elements of the production process.

“haikure and ISKO have always shared the same values and approach to innovation,” explained Elena Faleschini, ISKO Global Field Marketing Manager. “When we have the opportunity to work together, we know that the result is going to be astounding. Reloved is a testament to how fashion can be both innovative and responsible, without compromising on style.” A preview of Reloved was presented on Febuary 22nd, during a special happening that took place at Clan Upstairs (Vicolo Fiori 2, Milan), gathering friends, partners and denim lovers.

More information:
Isko haikure Milan Fashion Week
Source:

menabo

Oerlikon Nonwoven at the INDEX in Geneva (c) Oerlikon
Oerlikon Nonwoven at the INDEX in Geneva
21.02.2020

Oerlikon Nonwoven at the INDEX in Geneva

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the manufacture of hygiene nonwovens, Oerlikon Nonwoven offers its new QSR (Quality Sized Right) systems. Here, the benefits of the Chinese machine construction partner’s nonwoven formation are integrated into the complete solution. The advantage for nonwovens producers: highly competitive solutions at attractive prices with comparably low investment.

Cost-efficiently manufacturing meltblown nonwovens
New, unique and highly sophisticated filter media can be easily and efficiently manufactured thanks to Oerlikon Nonwoven’s optimized meltblown technology. Whether as a stand-alone system with one or several positions, as ‘plug & produce’ installations for already existing systems or in conjunction with other technologies: the Oerlikon Nonwoven meltblown process already enables the cost-efficient manufacture of meltblown nonwovens with the quality requirements of tomorrow. Ever more producers are choosing the meanwhile extensively tried-and-tested and consistently further-developed Oerlikon Nonwoven meltblown solutions.

Airlaid technology for the nonwovens of tomorrow
Pulp or cellulose fibers as raw material for manufacturing nonwovens are currently virtually unrivaled with regards to sustainability and environmental compatibility. The Oerlikon Nonwoven airlaid process is the ideal solution for processing this raw material into high-end products for a wide range of applications. Today, there is huge demand for manufacturing solutions for high-quality, lightweight airlaid nonwovens with economically attractive production speeds and system throughputs. In this area, the patented Oerlikon Nonwoven formation process – which also permits the homogeneous mixing of the most diverse raw materials, while simultaneously guaranteeing superb evenness and homogeneous fiber laying – is setting standards even for nonwovens with low running meter weights. And the benefits of this technology are also increasingly gaining significance in sustainable recycling applications.

P&G patented PHANTOM technology from Teknoweb Materials
Also being showcased at the trade fair stand is the P&G patented PHANTOM technology from Teknoweb Materials, Oerlikon Nonwoven’s strategic partner for hygiene products and wipes. The PHANTOM technology is released to Teknoweb Materials by P&G in worldwide exclusive license. The PHANTOM technology is the superior dry laid alternative technology for manufacturing wet wipes from pulp and polymer fibers, for example. Compared to conventional, known processes, this technology offers superior performances with cost advantage in much more eco-friendly products. Dispensing with hydroentanglement renders subsequent drying of the material redundant. Targeted process management allows the optimal setting of the relevant product parameters such as softness, tenacity, dirt absorption and liquid absorption.

More information:
Oerlikon
Source:

Oerlikon

Archroma is at Première Vision to present its 'Color Atlas by Archroma®' of colors for polyester. (c) Archroma
Archroma is at Première Vision to present its 'Color Atlas by Archroma®' of colors for polyester.
11.02.2020

ARCHROMA, TOGETHER WITH CARLIN, PRESENTS THE FIRST “COLOR ATLAS”

FOR POLYESTER AND “ACTIVE WEAR” COLOR TRENDS FOR WINTER 2021/2022

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, is at the Première Vision exhibition to present its 'Color Atlas by Archroma®' for polyester. This very first color library for polyester brings together 1,440 colors for sportswear and athleisure, swimwear, children's clothing, shoes, as well as for fashion and home textiles. In this context of innovation, Carlin, a pioneer in anticipating trends since 1947, will present its selection of trends in active wear and will unveil the 3 hottest colors for winter 2021/2022: “In our societies now ruled by the vital need for ENTERTAINMENT, the DIVERGENT "extroverted Slashers", free-spirited and efficient, stimulate a MAXIMUM SELF-EXPRESSION which combines communicative power and contagious adrenaline.

FOR POLYESTER AND “ACTIVE WEAR” COLOR TRENDS FOR WINTER 2021/2022

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, is at the Première Vision exhibition to present its 'Color Atlas by Archroma®' for polyester. This very first color library for polyester brings together 1,440 colors for sportswear and athleisure, swimwear, children's clothing, shoes, as well as for fashion and home textiles. In this context of innovation, Carlin, a pioneer in anticipating trends since 1947, will present its selection of trends in active wear and will unveil the 3 hottest colors for winter 2021/2022: “In our societies now ruled by the vital need for ENTERTAINMENT, the DIVERGENT "extroverted Slashers", free-spirited and efficient, stimulate a MAXIMUM SELF-EXPRESSION which combines communicative power and contagious adrenaline.

In terms of shapes, we imagine assertive, shaked, keeled proportions, with volume contrasts: ultra-tight and stretched volumes. Concerning the materials, this refers to compact knits, fine nervous gauges (neo milano stretch pop), embossed ribs, colored furs, knitted materials, city: ultra-matte color drapery, double sides, jeans, over dye, deep dye.”

Selected in collaboration with fashion, sportswear and trend experts, the Color Atlas by Archroma® Polyester Library brings together new colors for in line with current trends, from the most neutral tones to the most vivid hues to fluorescent colors.

 

 

More information:
Archroma Carlin
Source:

EMG Marcom

(c) Trevira GmbH
30.01.2020

Trevira at Heimtextil 2020

The Trevira CS joint booth at Heimtextil 2020 was once again a success.

Trevira looks back on a successful trade fair appearance at Heimtexil 2020. The concept of a joint booth together with customers along with the presentation of product innovations and a special exhibition dedicated to the contract sector has once again proved its worth. Trevira hosted 31 co-exhibitors thus increasing the number of participants again compared to last year. Members of the entire textile value chain were present at the Trevira stand: from the fibre production and yarn manufacture, to the colouring, weaving and warp and weft knitting stages, to the textile editor.

Klaus Holz, CEO Trevira GmbH: „We are pleased about the very positive feedback we got on our joint booth at Heimtextil 2020 from our customers and the visitors to our stand. It shows that our concept is successful and that the booth works well as a market place for Trevira CS.”

The Trevira CS joint booth at Heimtextil 2020 was once again a success.

Trevira looks back on a successful trade fair appearance at Heimtexil 2020. The concept of a joint booth together with customers along with the presentation of product innovations and a special exhibition dedicated to the contract sector has once again proved its worth. Trevira hosted 31 co-exhibitors thus increasing the number of participants again compared to last year. Members of the entire textile value chain were present at the Trevira stand: from the fibre production and yarn manufacture, to the colouring, weaving and warp and weft knitting stages, to the textile editor.

Klaus Holz, CEO Trevira GmbH: „We are pleased about the very positive feedback we got on our joint booth at Heimtextil 2020 from our customers and the visitors to our stand. It shows that our concept is successful and that the booth works well as a market place for Trevira CS.”

Product novelties were presented in an Innovation Park. Under the headline “Recycling at Trevira” the fibre producer presented its sustainable product range and diversified approaches to recycling: flame retardant fibres are produced from residual materials, which are reprocessed in an agglomeration plant. The recyclates are then deployed in the spinning facility to make new, high-quality products consisting of 100 % pre-consumer recycled material. Recycled, flame retardant filaments are produced from PET bottles and have a recycled content of 50 %. Standard polyester spun-dyed filament yarns are also available in a recycled version. Produced from PET bottles these yarns have a recycled content of 100 %.

In order to produce flame retardant fabrics which are also high-performing  in outdoor applications, Trevira now offers six more colours in addition to the existing colour range of 24 UV-stable, spun-dyed filament yarns. Trevira had been awarded the „Brandenburger Innovationspreis Kunststoffe und Chemie 2019“ for this innovation.

Cationic dyeable fibres and filament yarns enhance the Trevira portfolio of flame retardant specialties. They are used to create melange designs in fabrics, which still represents a strong trend in the home textile sector.

To meet the ever more complex demands of the market for more flexibility in design and additional functions as well as for sustainable products Trevira has introduced an enhanced Trevira CS branding concept, consisting of the three brands Trevira CS, Trevira CS flex und Trevira CS eco. Assigned according to product features, all of them stand for tested safety.