From the Sector

Reset
5 results
28.06.2023

EPTA highlights contribution of pultruded composites to sustainable construction

Increasing energy and resource efficiency in the construction sector will be key to the EU’s ambition of achieving climate neutrality by 2050. By enabling the manufacture of strong, durable and lightweight products, composite materials can help the construction sector improve its environmental sustainability, as well as reduce total lifecycle costs. The latest EPTA industry briefing, Pultruded composites contribute to a more sustainable future for construction, discusses how pultruded composites answer the need for materials offering high performance, faster installation, corrosion resistance and low maintenance.

The report is available to download from the EPTA website.

Increasing energy and resource efficiency in the construction sector will be key to the EU’s ambition of achieving climate neutrality by 2050. By enabling the manufacture of strong, durable and lightweight products, composite materials can help the construction sector improve its environmental sustainability, as well as reduce total lifecycle costs. The latest EPTA industry briefing, Pultruded composites contribute to a more sustainable future for construction, discusses how pultruded composites answer the need for materials offering high performance, faster installation, corrosion resistance and low maintenance.

The report is available to download from the EPTA website.

The future of construction
As one of the largest global users of energy and raw materials, the construction industry is under immense pressure to improve its sustainability. At the same time, it must respond to demands for improved performance and reduced total cost of ownership. New materials will be needed to minimise the use of natural resources, enable a reduction of carbon footprint and facilitate circular economy practices. Choosing the optimum materials required for durability throughout the lifecycle will be increasingly important. A shift to off-site production is also forecast, where factory-controlled environments and automated processes can improve quality control, lower waste, and reduce work on site.

Lightweight pultruded parts can be pre-assembled into modules or complete structures in the factory for faster installation on site. Lightweight profiles lower energy use during transportation and installation, and a longer service life combined with minimal maintenance can deliver a reduced through-life carbon footprint. Pultruded parts such as profiles, gratings, beams, tubes and planks are increasingly found in a range of building, construction and infrastructure applications. Examples include bridge decks, fencing, stairs and handrails, train platforms, cladding, utility poles, modular building concepts, and window frames.

One application offering large growth potential for composites is bridges. Composite bridges are being designed to provide a service life of 100 years and unlike steel bridges do not require regular repainting to protect them from corrosion. Over recent years, pultruded glass fibre composite has become a highly popular choice for pedestrian and cycle bridges. Pre-fabricated ‘easy fit’ bridge decking planks, pre-assembled bridge modules and complete bridge ‘kits’ are now available. Corrosion-resistant composite bridges are ideal for use near water or on the coast, and in remote locations where regular maintenance operations would be difficult. A composite bridge can deliver the same performance as a steel structure with a weight saving of up to 50% or more. This enables more streamlined bridge designs which require less substantial supporting structures and foundations, greatly reducing consumption of materials and energy. Lightweight also results in easier logistics and simplified installation. Pultruded are more easily transported to the construction site, with lower fuel consumption, and easier to move on site, often reducing labour requirements and the capacity of lifting equipment.

A lifecycle approach
As the construction industry looks to the future, the environmental and economic benefits of composite materials linked to easier logistics and installation, durability and low maintenance are becoming increasingly valued. More projects are demonstrating the benefits of composite materials and standards covering the design, fabrication and installation of pultruded profiles are making it easier for the construction industry to use them. With ongoing development and collaboration, pultrusion has the potential to contribute to a more sustainable future for construction and many other industries. EPTA will continue to promote the advancement of pultrusion technology and its applications and foster sustainable practices within the industry.

Source:

The European Pultrusion Technology Association (EPTA)

(c) AkzoNobel
13.07.2022

AkzoNobel launches tool to drive bodyshop sustainability

Bodyshops can now take advantage of the vehicle refinish industry’s first repair calculator to measure, manage and reduce carbon emissions, which has been developed by AkzoNobel.

Designed to help customers improve their carbon footprint when using the company’s premium refinish products, the CO2eRepairCalculator* is part of a new initiative which aims to encourage bodyshops to become more sustainable.

The tool is the latest digital innovation from AkzoNobel focused on making a long-lasting difference to customers. It identifies the carbon levels associated with the painting and drying process – including the energy consumed – and is linked directly to the vehicle refinishing products being used. It also provides data relating to the emission of volatile organic compounds (VOCs), therefore helping customers to understand where improvements can be made.

When using the tool, the emissions and energy consumed are calculated based on a controlled two-panel repair in a spray booth to Greenhouse Gas Protocol accounting standards. The results are presented in an online dashboard, which allows local energy prices to be factored in.

Bodyshops can now take advantage of the vehicle refinish industry’s first repair calculator to measure, manage and reduce carbon emissions, which has been developed by AkzoNobel.

Designed to help customers improve their carbon footprint when using the company’s premium refinish products, the CO2eRepairCalculator* is part of a new initiative which aims to encourage bodyshops to become more sustainable.

The tool is the latest digital innovation from AkzoNobel focused on making a long-lasting difference to customers. It identifies the carbon levels associated with the painting and drying process – including the energy consumed – and is linked directly to the vehicle refinishing products being used. It also provides data relating to the emission of volatile organic compounds (VOCs), therefore helping customers to understand where improvements can be made.

When using the tool, the emissions and energy consumed are calculated based on a controlled two-panel repair in a spray booth to Greenhouse Gas Protocol accounting standards. The results are presented in an online dashboard, which allows local energy prices to be factored in.

The launch means it will now be easier for bodyshops to take positive action in an effort to meet their sustainability and carbon reduction targets. This is becoming increasingly important, as insurance companies are putting greater pressure on preferred bodyshop partners to cut their emissions in line with supply chain ambitions that meet the UN Sustainable Development Goals.

The CO2eRepairCalculator is currently being introduced in the UK market to Sikkens customers (with Lesonal to follow shortly). It will be rolled out across markets in Europe during the next few months.

*CO2e stands for carbon dioxide and equivalent gases. The tool measures carbon dioxide (CO2) and equivalent gases such as methane (CH4) and nitrous oxide (N2O), which all fall under the term greenhouse gases (GHGs).

More information:
AkzoNobel Coatings Automotive
Source:

AkzoNobel

28.01.2022

Blue of a kind and Officina+39 introduce their sustainable collaboration

Two Italian companies committed to the transition to an ecological industry and presented the results of their collaboration at the Blue of a Kind shop in Milan. A union of intent that has led to a partnership initially born remotely, in the middle of the difficulties of recent years, finally set off through the live painting performance by Erik Varusio. The artist from Vicenza, well-known in the world of fashion and illustration, has customized a selection of Blue of a kind’s t-shirts using the sustainable Officina+39's Recycrom™ dyestuff.

Revolution of existing
Blue of a kind is meant to be not just a fashion company, rather a community built around an idea: to combine uncompromised style, contemporary fit and products with a valuable heritage, and a sustainable production process. The products are made exclusively from vintage products handcrafted with the use of scrap fabrics and surplus, thanks to a network of suppliers all over Europe, which makes it possible to find the best vintage garments and stock, ultimately becoming the raw material to lead a luxury revolution, chic yet sustainable.

Two Italian companies committed to the transition to an ecological industry and presented the results of their collaboration at the Blue of a Kind shop in Milan. A union of intent that has led to a partnership initially born remotely, in the middle of the difficulties of recent years, finally set off through the live painting performance by Erik Varusio. The artist from Vicenza, well-known in the world of fashion and illustration, has customized a selection of Blue of a kind’s t-shirts using the sustainable Officina+39's Recycrom™ dyestuff.

Revolution of existing
Blue of a kind is meant to be not just a fashion company, rather a community built around an idea: to combine uncompromised style, contemporary fit and products with a valuable heritage, and a sustainable production process. The products are made exclusively from vintage products handcrafted with the use of scrap fabrics and surplus, thanks to a network of suppliers all over Europe, which makes it possible to find the best vintage garments and stock, ultimately becoming the raw material to lead a luxury revolution, chic yet sustainable.

Fashion and sustainable chemicals
The mission of Blue of a kind perfectly matches with the technologies of Officina+39, a Biella-based company for which the word “waste” becomes synonymous with opportunity, a source for creating something new, encouraging circularity and reducing environmental impact. From this vision comes to be Recycrom™, a revolutionary and sustainable dyestuffs range, patented, which employs recycled used clothing, fibrous material, and textile scraps: its full range of pigment powders is obtained through a cutting-edge upcycling process that involves textile fibers from used clothing and manufacturing waste for dyeing and printing on cotton, wool, nylon or any cellulosic and natural fiber or blend.

Shared goals
Both companies firmly believe that the present and future of the fashion industry lies in circularity and upcycling without compromise. The sector has been hit hard in recent years by the pandemic and the difficulty in finding raw materials, but opportunities have been generated to think about new partnerships and initiatives, to focus on available resources and real needs, and to invest in sustainable technologies for change.
Being part of this change is the goal shared by Blue of a kind and Officina+39, starting with concrete contributions and more transparent, sustainable, durable and quality products.

Source:

Officina+39 / Menabò Group

17.12.2021

Atelier Emé collaborates with mending for good for Upcyling Project

An exclusive collection of archival wedding dresses by Atelier Emé artfully reworked in collaboration with mending for good, the consulting firm offering luxury brands creative and ethical solutions for design-driven upcycling.

Re-Love is the capsule collection composed of sixteen wedding dresses - 10 developed in collaboration with mending for good, 6 created in-house by the company's style office. Sixteen iconic garments of the brand selected among the most significant in the history of the maison, reworked with love through a transformation project based on the principles of circularity. Harmonious and enchanted fusion of past and present, an effort that makes clear and possible innovation strategies following sustainability paths.

An exclusive collection of archival wedding dresses by Atelier Emé artfully reworked in collaboration with mending for good, the consulting firm offering luxury brands creative and ethical solutions for design-driven upcycling.

Re-Love is the capsule collection composed of sixteen wedding dresses - 10 developed in collaboration with mending for good, 6 created in-house by the company's style office. Sixteen iconic garments of the brand selected among the most significant in the history of the maison, reworked with love through a transformation project based on the principles of circularity. Harmonious and enchanted fusion of past and present, an effort that makes clear and possible innovation strategies following sustainability paths.

Atelier Emé has decided to collaborate with mending for good by developing a series of pieces based  on craftsmanship techniques, creativity, romance and fun, starting from the archive dresses. A work carried out by the style office in the sartorial laboratories of the Maison Atelier Emé deconstructing and reconstructing the chosen garments, while mending for good, on the other hand, has provided repurposing solutions through painting on fabric by Karl Joerns of La Serra MK textile Atelier in Florence, hand embroidery by Donatella de Bonis and hand decorations. A fairy-tale upcycling, achieved through a synergistic work that has combined highly specialized skills and craftsmanship for ten creations, full of colorful designs, watercolor bouquets, three-dimensional applications and ton-sur-ton embroidery.

Source:

C.L.A.S.S. / GB Network

(c) RadiciGroup
25.10.2021

RadiciGroup: Sustainable Personal Protective Equipment at A+A

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

At RadiciGroup, care for the health and safety of people is one of the pillars of the Group's sustainability strategy, combined with a strong commitment to safeguarding the environment. Radipeople Eco, the first protective coverall with 100% end-of-life recyclability is proof of such commitment. All parts of Radipeople Eco: the fabric, lamination, zipper and thread are made of the same material, 100% polypropylene. Furthermore, the Group’s offering includes garments made with Respunsible®, a spundbond obtained from recycled polypropylene or materials certified under the ISCC Plus scheme.

Thanks to their versatility and technical characteristics, the nonwoven solutions proposed by RadiciGroup are suitable for many industrial sectors, including oil and gas, utilities, construction, food, automotive painting and shipbuilding, maintenance, agriculture, laboratories, microprocessor manufacturing and the pharmaceutical and chemical industries.

Radipeople personal protective equipment delivers excellent protection against external agents (liquids, splashes, jets, particles and sprays), high protection against biological hazards and infectious agents, and high robustness and lightness to optimize protection, on the one hand, and comfort, on the other. All Radipeople protective equipment is made of fully traceable materials, manufactured by a totally Italian production chain involving hundreds of workers, and sold in packaging designed with an ecodesign approach, that is, fully recyclable minimized packaging.

Source:

RadiciGroup